NCS01521_INSP_20210503

FACILITY COMPLIANCE INSPECTION REPORT Division of Waste Management Solid Waste Section

Page 1 of 3

UNIT TYPE:
Lined MSWLF LCID YW Transfer Compost SLAS COUNTY: Wake
Closed MSWLF HHW White goods Incin T&P FIRM X PERMIT NO.: NCS-01521
CDLF Tire T&P / Collection Tire Monofill Industrial Landfill DEMO SDTF FILE TYPE: COMPLIANCE

Date of Site Inspection: 05/03/2021 Date of Last Inspection: 04/09/2020
FACILITY NAME AND ADDRESS: Dumpstars Waste Services 3501 Creekwood Bluffs Ct.
Apex, NC 27539
GPS COORDINATES: N: NA E: NA
FACILITY CONTACT INFORMATION: Name: James (Jim) Hanak Address: 3434-135 Kildaire Farm Rd. PMB 162 – Cary, NC 27518 Telephone: [phone] (o), 919-449-5232 (c) Email address: [e-mail]

PARTICIPANTS: Chester Cobb (DWM) and Driver STATUS OF PERMIT: Active EXPIRES: 12/31/2021
PURPOSE OF SITE VISIT: New Vehicle STATUS OF PAST NOTED VIOLATIONS:
NA

OBSERVED VIOLATIONS:
NONE
The item(s) listed above were observed by Section staff and require action on behalf of the facility in order to come into or maintain compliance with the Statutes, Rules, and/or other regulatory requirements applicable to this facility. Be advised that pursuant to N.C.G.S. 130A-22, an administrative penalty of up to $15,000 per day may be assessed for each violation of the Solid Waste Laws, Regulations, Conditions of a Permit, or Order under Article 9 of Chapter 130A of the N.C. General Statutes. Further, the facility and/or all responsible parties may also be subject to enforcement actions including penalties, injunction from operation of a solid waste management facility or a solid waste collection service and any such further relief as may be necessary to achieve compliance with the North Carolina Solid Waste Management Act and Rules.

FACILITY COMPLIANCE INSPECTION REPORT Division of Waste Management Solid Waste Section

Page 2 of 3

ADDITIONAL COMMENTS
1) Pumper vehicle(s) inspected:
TRUCK LICENSE PLATE # VIN # TANK CAPACITY (gal)
CXS6074 2NPNHM6XXMM753899 1,100 waste, 400 fresh

2) The firm name, town name, phone number, and firm permit number were on both sides of the truck.
The letters were three (3) inches in height or greater. The lettering distinguishable and not blocked from
view. The lettering meets the requirements of 15A NCAC 13B .0835(b). See pictures below.
3) The tank is made of stainless steel and affixed to the frame of the truck as per 15A NCAC 13B .0835(a)(1).
4) The valves appeared to be in working order and closed as per 15A NCAC 13B .0835(a)(2). Caps present
on ports.
5) Access ports were properly sealed with lids that were closed as per 15A NCAC 13B .0835(a)(3).
6) No leaks noticed as per 15A NCAC 13B .0835(a).
7) Truck in compliance with the Septage Rules.

Driver side of the pumper vehicle.

Passenger side of the pumper vehicle.

FACILITY COMPLIANCE INSPECTION REPORT Division of Waste Management Solid Waste Section

Page 3 of 3

Please contact me if you have any questions or concerns regarding this inspection report.

____________________________________________ Phone: [phone] . Chester R. Cobb, Environmental Program Consultant Division of Waste Management, NCDEQ Regional Representative

Sent on: X Email Hand delivery US Mail Certified No. [ _]