1108T-20160127INSP

K"c'
Waste Management
ENVI RON MENTAL QUALITY
FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section
UNIT TYPE:
Lined
LCID
YW
Transfer
X
Compost
SLAS
COUNTY: BUNCOMBE
MSWLF
PERMIT NO.: 11-08T
Closed
HHW
White
Incin
T&P
FIRM
MSWLF
goods
FILE TYPE: COMPLIANCE
CDLF
TireT&P
Tire
Industrial
DEMO
SDTF
Collection
Monofill
Landfill
Date of Site Inspection: 01/27/2016 & 01/28/16
FACILITY NAME AND ADDRESS:
Buncombe County Transfer Facility
190 Hominy Creek Road
Asheville, NC 28806
Date of Last Inspection: 09/24/2014
GPS COORDINATES: N: 35.55725' W: 82.594291
FACILITY CONTACT NAME AND PHONE NUMBER:
Interim SW Director: Stephen Hunter
[828] 250-5462; Email address: stephen.hunterkbuncombecount�org
Transfer Station Manager: Dane Pederson
[828] 250-6205; Email address: dane.pederson(i�buncombecounty.org
FACILITY CONTACT ADDRESS:
Buncombe County Solid Waste Department
81 Panther Branch Road
Alexander, NC 28701
PARTICIPANTS:
Bill Wagner, Environmental Sr. Specialist — Solid Waste Section
Lee Hill, Environmental Sr. Specialist — Solid Waste Section
Dane Pederson, Transfer Station Manager — Buncombe County
STATUS OF PERMIT:
Current Permit Issued: May 13, 2014
Expires: August 17, 2019
PURPOSE OF SITE VISIT:
Comprehensive Compliance Inspection
STATUS OF PAST NOTED VIOLATIONS:
N/A
OBSERVED VIOLATIONS
None.
The item(s) listed above were observed by Section staff and require action on behalf of the facility in order to come into or maintain compliance
with the Statutes, Rules, and/or other regulatory requirements applicable to this facility. Be advised that pursuant to N.C.G.S. 130A-22, an
administrative penalty of up to $15,000 per day may be assessed for each violation of the Solid Waste Laws, Regulations, Conditions of a Permit,
or Order under Article 9 of Chapter 130A of the N.C. General Statutes. Further, the facility and/or all responsible parties may also be subject to
enforcement actions including penalties, injunction from operation of a solid waste management facility or a solid waste collection service and any
such further relief as may be necessary to achieve compliance with the North Carolina Solid Waste Management Act and Rules.

FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section
Page 2 of 2
ADDITIONAL COMMENTS
Figure 1: Site Map — Buncombe Co. Transfer Station 11-08T
190 Hominy Creek Road
Asheville, NC 28806
1. Staff Certifications:
NAME'
CERTIFICATION
EXPERIATION DATE
Dane Pederson
MOLO
06/18/18
Dane Pederson
Transfer Station Operations
02/28/16
Don Golden
Transfer Station Operations
09/03/18
Jimmy Moore
Transfer Station Operations
04/27/16
Shea Bupp
Transfer Station Operations
04/27/16
Larry Mashburn
Transfer Station Operations
08/14/18
Andrew Pickle
Transfer Station Operations
09/04/17
2. The current permit and operations plans are maintained on site.
3. All wastes are transferred, as needed, to the Buncombe County Municipal Solid Waste facility (Permit #11-07)
located at 81 Panther Branch Road, Alexander, NC 28701
4. The facility is currently taking in approximately 275-tons of waste per day.
5. The tipping fee for all wastes is currently $47/ton.

FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section
Page 3 of 3
6. Initial waste screening is done at the scale house and wastes are also screened when they arrive at the Buncombe
County Municipal Solid Waste facility for final disposal. Waste screening records were reviewed.
7. The facility's operating hours are:
Monday —Friday: 8:00 — 4:30
Saturday: 8:00 — 1:00
2. Looking into the transfer station.
1. Roll -off boxes staged outside of the transfer station
entrance for white goods, scrap metal & cardboard.
8. Several roll -off boxes are staged on the asphalt apron outside of the transfer station entrance as a convenience
for Buncombe County residents for the collection of scrap metal / white goods, cardboard, and other
recoverable items. (Photo #2)
9. All white goods and scrap metals are collected by Biltmore Iron & Metal and taken to their Asheville facility
for final processing. Biltmore Iron & Metal removes all CFCs from all refrigeration units.
10. There are several leachate collection drains at the entrance to the transfer station (Photo #3) and one trench
drain in the area of the compactors at the rear of the transfer station (Photo #4)
4. Leachate collection drain (typical) at the entrance to
the transfer station.
3. Leachate collection trench drain at the back of the transfer
station adjacent to the compactors.
11. The leachate collection system discharges directly to the Metropolitan Sewage District of Buncombe County
collection and treatment system.
12. Wastes are dumped directly into a compactor located inside of the transfer station. (Photos #5 & #6)
13. The access road is paved and well maintained.
14. Windblown litter is well controlled.
15. Proper signage is displayed at the entrance to the facility.
16. The interior of the transfer station is well maintained.

FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section
Page 4 of 4
5. Looking down into the compactor at the back of the
transfer station.
6. Looking down into the compactor at the back of the
transfer station. (Reverse angle of Photo #5)
Please contact me if you have any questions or concerns regarding this inspection report.
Digitally signed by Bill Wagner
DN: cn=Bill Wagner, o=Division of
Waste Management, ou=Solid Waste
Section,
email=[e-mail],c=US Phone: [phone]
Bill Wagner
Environmental Senior Specialist
Regional Representative
Sent on: 1/28/16 to Stephen Hunter Email Hand delivery X US Mail Certified No. Lj
ec: Deb Aja, Western District Supervisor — Solid Waste Section
Sarah Rice, Compliance Officer — Solid Waste Section
Dane Pederson, Transfer Station Supervisor — Buncombe Co. dane.pedersongbuncombecounty.org
Kristy Smith, Bioreactor Manager — Buncombe Co. kristy.smithgbuncombecount�org