NCS01181_INSP_20210309

FACILITY COMPLIANCE INSPECTION REPORT Division of Waste Management
Solid Waste Section

Page 1 of 2
UNIT TYPE:
Lined MSWLF LCID YW Transfer Compost SLAS COUNTY: Swain
Closed MSWLF HHW White goods Incin T&P FIRM X PERMIT NO.: NCS-01181
CDLF Tire T&P / Collection Tire Monofill Industrial Landfill DEMO SDTF FILE TYPE: COMPLIANCE

Date of Site Inspection: 3/9/2021 Date of Last Inspection: 2/19/2013
FACILITY NAME AND ADDRESS: G.S.M.R.
225 Everett St, Suite G & H
Bryson City, NC 28713
FACILITY CONTACT NAME AND PHONE NUMBER:
Name: Teddy Crawford Telephone: [phone]
Email address: [e-mail] FACILITY CONTACT ADDRESS:
Same as above
PARTICIPANTS: Troy Harrison, NC Solid Waste Section Teddy Crawford, G.S.M.R.
STATUS OF PERMIT:
Active PURPOSE OF SITE VISIT: New tank on existing vehicle inspection STATUS OF PAST NOTED VIOLATIONS: N/A OBSERVED VIOLATIONS: N/A

The item(s) listed above were observed by Section staff and require action on behalf of the facility in order to come into or maintain compliance with the Statutes, Rules, and/or other regulatory requirements applicable to this facility. Be advised that pursuant to N.C.G.S. 130A-22, an administrative penalty of up to $15,000 per day may be assessed for each violation of the Solid Waste Laws, Regulations, Conditions of a Permit, or Order under Article 9 of Chapter 130A of the N.C. General Statutes. Further, the facility and/or all responsible parties may also be subject to enforcement actions including penalties, injunction from operation of a solid waste management facility or a solid waste collection service and any such further relief as may be necessary to achieve compliance with the North Carolina Solid Waste Management Act and Rules.
FACILITY COMPLIANCE INSPECTION REPORT Division of Waste Management
Solid Waste Section

Page 2 of 2
ADDITIONAL COMMENTS
1. The inspection was conducted in Dillsboro, Jackson County, North Carolina. 2. The following firm truck was inspected:
Vehicle Identification Number (VIN) NC Tag Number Capacity (gallons) 3D6WG46A77G768782 AJ-4866 950
3. The tank appeared to be structurally sound and bolted to the frame. The tank is constructed of plastic as was originally permitted. Current regulations require the tanks to be constructed of metal. Future vehicles must have septage holding tanks that are constructed of metal. 4. Valves and access ports appeared to be secure. Caps were present on the access ports.
5. The truck was properly marked in accordance with the lettering requirements. 6. No leaks were observed.
Please contact me if you have any questions or concerns regarding this inspection report. _________________________________________ Phone: [phone] Troy Harrison Environmental Specialist II Regional Representative
Sent on: 3/22/2021 X Email Hand delivery US Mail Certified No. [ _]

Copies: Chester Cobb files