NCS01461_INSP_20201112

FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section

Page 1 of 3

UNIT TYPE:
Lined MSWLF LCID YW Transfer Compost SLAS COUNTY: Wake
Closed MSWLF HHW White goods Incin T&P FIRM X PERMIT NO.: NCS-01461
CDLF Tire T&P / Collection Tire Monofill Industrial Landfill DEMO SDTF FILE TYPE: COMPLIANCE

Date of Site Inspection: 11/12/2020 Date of Last Inspection: 03/28/2019

FACILITY NAME AND ADDRESS:
Mr. William Dyer
Septic Blue LLC
2325 Hodge Road Knightdale, NC 27545
GPS COORDINATES: N: NA E: NA
FACILITY CONTACT INFORMATION:
Name: William “Billy” Dyer Address: PO Box 2049 – Roswell, GA 30077 Telephone: [phone]
Email address: [e-mail]

PARTICIPANTS: Chester Cobb (DWM) and Billy Dyer

STATUS OF PERMIT: Active EXPIRES: 12/31/2020
PURPOSE OF SITE VISIT: New Vehicle
STATUS OF PAST NOTED VIOLATIONS:
No violations noted on the inspection conducted on 03/28/2019.

OBSERVED VIOLATIONS:
NONE
The item(s) listed above were observed by Section staff and require action on behalf of the facility in order to come into or maintain compliance with the Statutes, Rules, and/or other regulatory requirements applicable to this facility. Be advised that pursuant to N.C.G.S. 130A-22, an administrative penalty of up to $15,000 per day may be assessed for each violation of the Solid Waste Laws, Regulations, Conditions of a Permit, or Order under Article 9 of Chapter 130A of the N.C. General Statutes. Further, the facility and/or all responsible parties may also be subject to enforcement actions including penalties, injunction from operation of a solid waste management facility or a solid waste collection service and any such further relief as may be necessary to achieve compliance with the North Carolina Solid Waste Management Act and Rules.

FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section

Page 2 of 3

ADDITIONAL COMMENTS
1) Pumper vehicle(s) inspected:
TRUCK LICENSE PLATE # VIN # TANK CAPACITY (gal)
YA161803 3ALACXFC9MDMK9712 2,500
YA161654 3ALACXFC0MDMK9713 2,500

2) Both pumper vehicles had the firm name, town name, phone number, and firm permit number on both
sides of the vehicle. Every letter of the firm name, phone number, town name, and firm permit number
was at least (3) inches in height.
3) The tank is made of steel and affixed to the frame of the truck as per 15A NCAC 13B .0835(a)(1).
4) The valves appeared to be in working order and closed as per 15A NCAC 13B .0835(a)(2). Caps present
on ports.
5) Access ports were properly sealed with lids that were closed as per 15A NCAC 13B .0835(a)(3).
6) No leaks noticed as per 15A NCAC 13B .0835(a).
7) Both pumper vehicles passed inspection.

Picture of passenger side of pump truck with VIN #
3ALACXFC9MDMK9712.
Picture of passenger side of truck.

Picture of passenger side of pump truck with VIN #
3ALACXFC0MDMK9713.
Picture of passenger side of truck.

FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section

Page 3 of 3

Please contact me if you have any questions or concerns regarding this inspection report.

____________________________________________ Phone: [phone] . Chester R. Cobb, Environmental Program Consultant
Division of Waste Management, NCDEQ Regional Representative

Sent on: X Email Hand delivery US Mail Certified No. [ _]