NCS00758_INSP_20201203

FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section

Page 1 of 2

UNIT TYPE:
Lined MSWLF LCID YW Transfer Compost SLAS COUNTY: Vance
Closed MSWLF HHW White goods Incin T&P FIRM X PERMIT NO.: NCS-00758
CDLF Tire T&P / Collection Tire Monofill Industrial Landfill DEMO SDTF FILE TYPE: COMPLIANCE

Date of Site Inspection: 12/03/2020 Date of Last Inspection: 01/07/2020
FACILITY NAME AND ADDRESS:
Mike Dickerson and Stephen Dickerson K.T. Moore Septic Tank Service 712 N. Chavis Road
Kittrell, NC 27544
GPS COORDINATES: N: NA E: NA
FACILITY CONTACT INFORMATION: Name: Mike Dickerson Address: Same as above Telephone: [phone]
Email address: [e-mail]

PARTICIPANTS: Chester Cobb (DWM) and Stephen Dickerson STATUS OF PERMIT: Active EXPIRES: 12/31/2020
PURPOSE OF SITE VISIT: New Vehicle STATUS OF PAST NOTED VIOLATIONS:
N.A.

OBSERVED VIOLATIONS:
NONE
The item(s) listed above were observed by Section staff and require action on behalf of the facility in order to come into or maintain compliance with the Statutes, Rules, and/or other regulatory requirements applicable to this facility. Be advised that pursuant to N.C.G.S. 130A-22, an administrative penalty of up to $15,000 per day may be assessed for each violation of the Solid Waste Laws, Regulations, Conditions of a Permit, or Order under Article 9 of Chapter 130A of the N.C. General Statutes. Further, the facility and/or all responsible parties may also be subject to enforcement actions including penalties, injunction from operation of a solid waste management facility or a solid waste collection service and any such further relief as may be necessary to achieve compliance with the North Carolina Solid Waste Management Act and Rules.

FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section

Page 2 of 2

ADDITIONAL COMMENTS
1) Pumper vehicle(s) inspected:
TRUCK LICENSE PLATE # VIN # TANK CAPACITY (gal)
KF-5357 1FVACWDT0EHFH2197 2,000

2) The firm name, town name, phone number, and firm permit number were on both sides of the pumper
vehicle. The letters were three (3) inches or greater in height. The lettering was distinguishable and not
blocked from view. The lettering on the pumper vehicle meets the requirements of 15A NCAC 13B
.0835(b).
3) The tank on the pumper vehicle was made of steel and affixed to the frame of the truck as per 15A NCAC
13B .0835(a)(1).
4) The valves appeared to be in working order and closed as per 15A NCAC 13B .0835(a)(2). Caps present
on hose ports.
5) Access ports on tanks appeared to be in good repair and sealed as per 15A NCAC 13B .0835(a)(3).
6) No leaks noticed as per 15A NCAC 13B .0835(a).
7) The pumper vehicle passes inspection.

Driver side of pumper vehicle. Passenger side of pumper vehicle.

Please contact me if you have any questions or concerns regarding this inspection report.

____________________________________________ Phone: [phone] .
Chester R. Cobb, Environmental Program Consultant Division of Waste Management, NCDEQ Regional Representative
Sent on: X Email Hand delivery US Mail Certified No. [ _]