NCS01459_INSP_20200730

FACILITY COMPLIANCE INSPECTION REPORT Division of Waste Management
Solid Waste Section

Page 1 of 3
UNIT TYPE:
Lined MSWLF LCID YW Transfer Compost SLAS COUNTY: Buncombe
Closed MSWLF HHW White goods Incin T&P FIRM X PROPOSED PERMIT NO.: NCS-01459
CDLF Tire T&P / Collection Tire Monofill Industrial Landfill DEMO SDTF FILE TYPE: COMPLIANCE
Date of Site Inspection: 7/31/2030 Date of Last Inspection: 12/20/2018
FACILITY NAME AND ADDRESS: Garbage Pal 424 Mills Gap Road Arden, NC 28704 FACILITY CONTACT NAME AND PHONE NUMBER:
Name: Jared Breneman Telephone: [phone]
Email address: [e-mail]
FACILITY CONTACT ADDRESS:
Same as above
PARTICIPANTS: Troy Harrison, NC Solid Waste Section Jared Breneman, Garbage Pal Juston Bullard, Garbage Pal
STATUS OF PERMIT:
Active PURPOSE OF SITE VISIT: New Septage Pumper Vehicle and tank change STATUS OF PAST NOTED VIOLATIONS: N/A
OBSERVED VIOLATIONS:
N/A

The item(s) listed above were observed by Section staff and require action on behalf of the facility in order to come into or maintain compliance with the Statutes, Rules, and/or other regulatory requirements applicable to this facility. Be advised that pursuant to N.C.G.S. 130A-22, an administrative penalty of up to $15,000 per day may be assessed for each violation of the Solid Waste Laws, Regulations, Conditions of a Permit, or Order under Article 9 of Chapter 130A of the N.C. General Statutes. Further, the facility and/or all responsible parties may also be subject to enforcement actions including penalties, injunction from operation of a solid waste management facility or a solid waste collection service and any such further relief as may be necessary to achieve compliance with the North Carolina Solid Waste Management Act and Rules.
FACILITY COMPLIANCE INSPECTION REPORT Division of Waste Management
Solid Waste Section

Page 2 of 3
ADDITIONAL COMMENTS
1. The inspection was conducted at the Asheville Regional Office, Swannanoa in Buncombe County, North Carolina.
2. The following firm trucks were inspected:
Vehicle Identification Number (VIN) Tag Number Capacity (gallons)
2NKMHD7X77M210319 JH-6260 600 Waste/300 Fresh
1GBJK39D97E187309 HN-2499 300 Waste/100 Fresh

Vehicle Tag No. JH-6260
Vehicle Tag No. HN-2499 1. The tanks appeared to be structurally sound and bolted (HN-2499) or welded (JH-6260) to the frame.
FACILITY COMPLIANCE INSPECTION REPORT Division of Waste Management
Solid Waste Section

Page 3 of 3
Specifically, the tank on the larger vehicle is a slide in unit and attached to the truck frame of the vehicle by four bolts and welded metal.
2. Valves and access ports appeared to be secure. Caps were present on the access ports. 3. The truck was properly marked in accordance with the lettering requirements with the following exceptions: a. The town name on both vehicles was listed as Asheville, whereas the application stated Arden, NC. The lettering for the town name was less than 3” in height. This was corrected and reported via emails with photographs on 7/30/2020. b. The Permit number on both vehicles were less than 3” in height. This was corrected and reported via
emails with photographs on 7/30/2020. 4. No leaks were observed. Please contact me if you have any questions or concerns regarding this inspection report.
_________________________________________ Phone: [phone] Troy Harrison Environmental Senior Specialist Regional Representative
Sent on: 7/31/2020 X Email Hand delivery US Mail Certified No. [ _]
Copies: Chester Cobb, Solid Waste Section
NC Solid Waste Files