NCS01229_INSP_20200911

FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section

Page 1 of 2

UNIT TYPE:
Lined MSWLF LCID YW Transfer Compost SLAS COUNTY: Franklin
Closed MSWLF HHW White goods Incin T&P FIRM X PERMIT NO.: NCS-01229
CDLF Tire T&P / Collection Tire Monofill Industrial Landfill DEMO SDTF FILE TYPE: COMPLIANCE

Date of Site Inspection: 09/11/2020 Date of Last Inspection: .
FACILITY NAME AND ADDRESS:
T&T Septic Cleaning Mr. Thurman Walker 17 Hickory Rock Road
Louisburg, NC 27549
GPS COORDINATES: N: NA E: NA
FACILITY CONTACT INFORMATION:
Name: Mr. Thurman Walker Address: Same as above Telephone: [phone]
Email address: [e-mail]

PARTICIPANTS: Chester Cobb (DWM) and Thurman Walker STATUS OF PERMIT: Pending (Permit issued on 09/11/2020) EXPIRES:
PURPOSE OF SITE VISIT: Pre-operational STATUS OF PAST NOTED VIOLATIONS: NA

OBSERVED VIOLATIONS:
NONE
The item(s) listed above were observed by Section staff and require action on behalf of the facility in order to come into or maintain compliance with the Statutes, Rules, and/or other regulatory requirements applicable to this facility. Be advised that pursuant to N.C.G.S. 130A-22, an administrative penalty of up to $15,000 per day may be assessed for each violation of the Solid Waste Laws, Regulations, Conditions of a Permit, or Order under Article 9 of Chapter 130A of the N.C. General Statutes. Further, the facility and/or all responsible parties may also be subject to enforcement actions including penalties, injunction from operation of a solid waste management facility or a solid waste collection service and any such further relief as may be necessary to achieve compliance with the North Carolina Solid Waste Management Act and Rules.

FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section

Page 2 of 2

ADDITIONAL COMMENTS
1) Pumper vehicle(s) inspected:
TRUCK LICENSE PLATE # VIN # TANK CAPACITY (gal)
KE-6852 1GBM7D1Y8JV106316 1,500

2) All required information was present on both sides of the vehicle. Each letter was at least 3 inches in
height.
3) Tank was made of steel and appeared to be structurally sound.
4) The tank was bolted to the frame of the truck.
5) Access ports appeared to be in working order and properly sealed.
6) Valves appeared to be in working order. Caps present on the hose ports.
7) No leaks noticed.
8) Truck passed inspection. Permit issued on 09/11/2020.
9) Be sure to go to a Continuing Education Class to acquire four (4) hours of training for Septage
Management to renew your permit for 2021. The Training Classes are offered by the North Carolina
Septic Tank Association (NCSTA) and the North Carolina Pumper Group. Please check with the
Associations about when and where they will be holding the classes. You can find this information out
on their webpages. The link to the NCSTA’s webpage is https://www.ncsta.net/. The link to the NC
Pumper Group’s webpage is https://ncpumpergroup.org/.

Driver side of pumper vehicle. Passenger side of the pumper vehicle.

Please contact me if you have any questions or concerns regarding this inspection report.

____________________________________________ Phone: [phone] . Chester R. Cobb, Environmental Program Consultant
Division of Waste Management, NCDEQ Regional Representative
Sent on: X Email Hand delivery US Mail Certified No. [ _]