Loading...
HomeMy WebLinkAboutNCS01536_INSP_20200616FACILITY COMPLIANCE INSPECTION REPORT Division of Waste Management Solid Waste Section Page 1 of 3 UNIT TYPE: Lined MSWLF LCID YW Transfer Compost SLAS COUNTY: Nash Closed MSWLF HHW White goods Incin T&P FIRM X PERMIT NO.: NCS-01536 CDLF Tire T&P / Collection Tire Monofill Industrial Landfill DEMO SDTF FILE TYPE: COMPLIANCE Date of Site Inspection: 06/16/2020 Date of Last Inspection: . FACILITY NAME AND ADDRESS: Mr. Mickey L. Bissette Jr. and Mr. Justin Bissette Southern Nash Septic Systems 3661 W. Hornes Church Road Bailey, NC 27807 GPS COORDINATES: N: NA E: NA FACILITY CONTACT INFORMATION: Name: Mickey L. Bissette Jr. and Justin Bissette Address: Same as above Telephone: 252-235-8438 (Mickey) and 252-205-8154 (Justin) Email address: southernnashsepticsystems@gmail.com PARTICIPANTS: Chester Cobb (DWM), Mickey Bissette, and Justin Bissette STATUS OF PERMIT: Pending EXPIRES: PURPOSE OF SITE VISIT: Pre-operational STATUS OF PAST NOTED VIOLATIONS: NA OBSERVED VIOLATIONS: None The item(s) listed above were observed by Section staff and require action on behalf of the facility in order to come into or maintain compliance with the Statutes, Rules, and/or other regulatory requirements applicable to this facility. Be advised that pursuant to N.C.G.S. 130A-22, an administrative penalty of up to $15,000 per day may be assessed for each violation of the Solid Waste Laws, Regulations, Conditions of a Permit, or Order under Article 9 of Chapter 130A of the N.C. General Statutes. Further, the facility and/or all responsible parties may also be subject to enforcement actions including penalties, injunction from operation of a solid waste management facility or a solid waste collection service and any such further relief as may be necessary to achieve compliance with the North Carolina Solid Waste Management Act and Rules. FACILITY COMPLIANCE INSPECTION REPORT Division of Waste Management Solid Waste Section Page 2 of 3 ADDITIONAL COMMENTS 1) Pumper vehicle(s) inspected: TRUCK LICENSE PLATE # VIN # TANK CAPACITY (gal) 2NKHHM6X6CM331128 2,500 2) All required information was present on both sides of the vehicle. Each letter was at least 3 inches in height except for the a and e in the town name. Received emails on 06/16/2020 confirming that the height of the a and e had been enlarged to be greater than 3 inches in height. 3) Tank was made of steel and appeared to be structurally sound. No signs of weakness noticed with the tank. 4) The tank was bolted to the frame of the truck. 5) Access ports appeared to be in working order and properly sealed. 6) Valves appeared to be in working order. Caps present on the hose ports. 7) No leaks noticed. 8) Truck passed inspection. Permit issued on 06/17/2020. Driver side of pump truck. Passenger side of pump truck. FACILITY COMPLIANCE INSPECTION REPORT Division of Waste Management Solid Waste Section Page 3 of 3 Picture emailed on 06/16/2020 showing that the a and e was enlarged to be larger than 3 inches in height. Please contact me if you have any questions or concerns regarding this inspection report. ____________________________________________ Phone: (919) 707-8283 . Chester R. Cobb, Environmental Program Consultant Division of Waste Management, NCDEQ Regional Representative Sent on: X Email Hand delivery US Mail Certified No. [ _]