HomeMy WebLinkAboutNCS00404_INSP_20200130FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section
Page 1 of 2
UNIT TYPE:
Lined MSWLF LCID YW Transfer Compost SLAS COUNTY: Rockingham
Closed MSWLF HHW White goods Incin T&P FIRM X PERMIT NO.: NCS-00404
CDLF Tire T&P / Collection Tire Monofill Industrial Landfill DEMO SDTF FILE TYPE: COMPLIANCE
Date of Site Inspection: 01/30/2020 Date of Last Inspection: .
FACILITY NAME AND ADDRESS:
Mr. Eric Gann Gann Brothers Septic Tank Service, Inc. 191 Percy Lane
Mayodan, NC 27027
GPS COORDINATES: N: NA E: NA
FACILITY CONTACT INFORMATION:
Name: Eric Gann Address: Same as above Telephone: 336-548-2971
Email address: gann.brothers@yahoo.com
PARTICIPANTS: Chester Cobb (DWM) STATUS OF PERMIT: Active EXPIRES: 12/31/2020
PURPOSE OF SITE VISIT: New Vehicle STATUS OF PAST NOTED VIOLATIONS: NA
OBSERVED VIOLATIONS:
NONE
The item(s) listed above were observed by Section staff and require action on behalf of the facility in order to come into or maintain compliance with the Statutes, Rules, and/or other regulatory requirements applicable to this facility. Be advised that pursuant to N.C.G.S. 130A-22, an administrative penalty of up to $15,000 per day may be assessed for each violation of the Solid Waste Laws, Regulations, Conditions of a Permit, or Order under Article 9 of Chapter 130A of the N.C. General Statutes. Further, the facility and/or all responsible parties may also be subject to enforcement actions including penalties, injunction from operation of a solid waste management facility or a solid waste collection service and any such further relief as may be necessary to achieve compliance with the North Carolina Solid Waste Management Act and Rules.
FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section
Page 2 of 2
ADDITIONAL COMMENTS
1) Pumper vehicle(s) inspected:
TRUCK LICENSE PLATE # VIN # TANK CAPACITY (gal)
YA 151537 5PVNV8JV7L5S60337 2,500
2) The required information was on both sides of the pump truck. The letters were at three (3) inches in
height. The lettering was distinguishable and not blocked from view. The lettering meets the
requirements of 15A NCAC 13B .0835(b). See pictures below.
3) The tank is made of steel and affixed to the frame of the truck as per 15A NCAC 13B .0835(a)(1).
4) The valves appeared to be in working order and closed as per 15A NCAC 13B .0835(a)(2). Caps present
on ports.
5) Access ports were properly sealed with lids that were closed as per 15A NCAC 13B .0835(a)(3).
6) No leaks noticed as per 15A NCAC 13B .0835(a).
7) Truck in compliance with the Septage Rules.
Passenger side of truck. Driver side of truck.
Please contact me if you have any questions or concerns regarding this inspection report.
____________________________________________ Phone: (919) 707-8283 .
Chester R. Cobb, Environmental Program Consultant Division of Waste Management, NCDEQ Regional Representative
Sent on: X Email Hand delivery US Mail Certified No. [ _]