HomeMy WebLinkAboutNCS01519_INSP_20200220FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section
Page 1 of 2
UNIT TYPE:
Lined MSWLF LCID YW Transfer Compost SLAS COUNTY: Roberson
Closed MSWLF HHW White goods Incin T&P FIRM X PERMIT NO.: NCS-01519
CDLF Tire T&P / Collection Tire Monofill Industrial Landfill DEMO SDTF FILE TYPE: COMPLIANCE
Date of Site Inspection: 02/20/2020 Date of Last Inspection: .
FACILITY NAME AND ADDRESS:
Mr. Fred Waters Eagle Restrooms 22425 Hwy 80 East
Statesboro, Ga. 30461
GPS COORDINATES: N: NA E: NA
FACILITY CONTACT INFORMATION:
Name: Mr. Fred Waters Address: PO Box 1864 – Statesboro, Ga. 30459 Telephone: 912-623-2040
Email address: fwaters@eaglerestrooms.com
PARTICIPANTS: Chester Cobb (DWM), Fred Waters STATUS OF PERMIT: Pending EXPIRES:
PURPOSE OF SITE VISIT: Pre-operational STATUS OF PAST NOTED VIOLATIONS: NA
OBSERVED VIOLATIONS:
NONE
The item(s) listed above were observed by Section staff and require action on behalf of the facility in order to come into or maintain compliance with the Statutes, Rules, and/or other regulatory requirements applicable to this facility. Be advised that pursuant to N.C.G.S. 130A-22, an administrative penalty of up to $15,000 per day may be assessed for each violation of the Solid Waste Laws, Regulations, Conditions of a Permit, or Order under Article 9 of Chapter 130A of the N.C. General Statutes. Further, the facility and/or all responsible parties may also be subject to enforcement actions including penalties, injunction from operation of a solid waste management facility or a solid waste collection service and any such further relief as may be necessary to achieve compliance with the North Carolina Solid Waste Management Act and Rules.
FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section
Page 2 of 2
ADDITIONAL COMMENTS
1) Pumper vehicle(s) inspected:
TRUCK LICENSE PLATE # VIN # TANK CAPACITY (gal)
EVM163 2NKHHM6X8KM259864 1,200
2) All required information was present on both sides of the vehicle. Each letter was at least 3 inches in
height.
3) Tank was made of metal and appeared to be structurally sound. No signs of weakness noticed with the
tank.
4) The tank was bolted to the frame of the truck.
5) Access ports appeared to be in working order and properly sealed.
6) Valves appeared to be in working order. Caps present on the hose ports.
7) No leaks noticed.
8) Truck passed inspection. Permit issued on 03/17/2020.
Driver side of vehicle. Passenger side of vehicle.
Please contact me if you have any questions or concerns regarding this inspection report.
____________________________________________ Phone: (919) 707-8283 .
Chester R. Cobb, Environmental Program Consultant Division of Waste Management, NCDEQ Regional Representative
Sent on: X Email Hand delivery US Mail Certified No. [ _]