NCS01363_INSP_20190507

FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section

Page 1 of 2

UNIT TYPE:
Lined MSWLF LCID YW Transfer Compost SLAS COUNTY: Pasquotank
Closed MSWLF HHW White goods Incin T&P FIRM X PERMIT NO.: NCS-01363
CDLF Tire T&P / Collection Tire Monofill Industrial Landfill DEMO SDTF FILE TYPE: COMPLIANCE

Date of Site Inspection: 4/10/2019 Date of Last Inspection:

FACILITY NAME AND ADDRESS:
Eure
GPS COORDINATES: N: NA E: NA
FACILITY CONTACT INFORMATION:
Name: Jason McGee Address: 1313 Priority Lane Telephone: [phone]
Email address: [e-mail]

PARTICIPANTS: Russel S., Brian Eure, Jeffrey Bullard DWM STATUS OF PERMIT: Pending EXPIRES: Pending 12/31/2019
PURPOSE OF SITE VISIT: Pre-Operational STATUS OF PAST NOTED VIOLATIONS:
NA

OBSERVED VIOLATIONS:
The required town name was not displayed on both sides of the pumper vehicle in letters three inches or
greater. (See Item 1 in comments page 2)
15A NCAC 13B .0835 TRANSPORTATION OF SEPTAGE
(b) All permitted septage management firms shall display lettering on each side of every pumper vehicle
operated by the firm. The lettering shall include the firm name, town name, phone number, and septage
management firm permit number as shown on the firm application. All lettering required by this Rule on
the pumper vehicle shall be no less than three inches in height and legible, distinguishable from the
background, and not obstructed from view. Identification shall not be removable (i.e. no magnetic signs).
The item(s) listed above were observed by Section staff and require action on behalf of the facility in order to come into or maintain compliance with the Statutes, Rules, and/or other regulatory requirements applicable to this facility. Be advised that pursuant to N.C.G.S. 130A-22, an administrative penalty of up to $15,000 per day may be assessed for each violation of the Solid Waste Laws, Regulations, Conditions of a Permit, or Order under Article 9 of Chapter 130A of the N.C. General Statutes. Further, the facility and/or all responsible parties may also be subject to enforcement actions including penalties, injunction from operation of a solid waste management facility or a solid waste collection service and any such further relief as may be necessary to achieve compliance with the North Carolina Solid Waste Management Act and Rules.

FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section

Page 2 of 2

ADDITIONAL COMMENTS

TRUCK LICENSE PLATE # VIN # TANK CAPACITY (gal)
VA 223-209 59VNJ8JJ8F4S50208 1500/500 (Waste/Water)
VA 223-293 5PVNJ8JJ6F4S50207 1500/500 (Waste/Water)

1) All lettering indicating firm name, phone number, and septage management firm permit number
were permanently attached to each side of each truck, were plainly visible and met height
requirements at the time of the inspection. The required town name lettering did not meet height
requirements. Photos verifying corrected lettering were received on 5/7/2019.
2) The septage holding tank was constructed of metal and appeared to be structurally sound.
3) The tank was bolted to the truck frame.
4) The septage drain valve appeared to be in working order. No septage leaks were observed.
5) All port covers and caps where in place and appeared to be in proper working order.

Please contact me if you have any questions or concerns regarding this inspection report.

____________________________________________ Phone: [phone] .
Jeffrey Bullard, Environmental Specialist II Division of Waste Management, NCDEQ Regional Representative

Sent on:7/16/2019 Email X Hand delivery US Mail Certified No. [ _]