NCS01088_INSP_20190621

FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section

Page 1 of 2

UNIT TYPE:
Lined MSWLF LCID YW Transfer Compost SLAS COUNTY: Nash
Closed MSWLF HHW White goods Incin T&P FIRM X PERMIT NO.: NCS-01088
CDLF Tire T&P / Collection Tire Monofill Industrial Landfill DEMO SDTF FILE TYPE: COMPLIANCE

Date of Site Inspection: 6/21/2019 Date of Last Inspection:

FACILITY NAME AND ADDRESS:
Bright & Clean Portables LLC 312 N. Louisburg Rd
GPS COORDINATES: N: NA E: NA
FACILITY CONTACT INFORMATION:
Name: Jeffery C. Mills Address: 312 N. Louisburg Rd Spring Hope, NC 27882 Telephone: [phone]
Email address: [e-mail]

PARTICIPANTS: Jeffery Mills (BCP) and Jeffrey Bullard (DWM) STATUS OF PERMIT: Active EXPIRES:
PURPOSE OF SITE VISIT: Pre-operational STATUS OF PAST NOTED VIOLATIONS:
NA

OBSERVED VIOLATIONS:
Lettering indicating town name did not meet height requirements per rule:
15A NCAC 13B .0835 TRANSPORTATION OF SEPTAGE
(b) All permitted septage management firms shall display lettering on each side of every pumper vehicle
operated by the firm. The lettering shall include the firm name, town name, phone number, and septage
management firm permit number as shown on the firm application. All lettering required by this Rule on
the pumper vehicle shall be no less than three inches in height and legible, distinguishable from the
background, and not obstructed from view. Identification shall not be removable (i.e. no magnetic signs).

The item(s) listed above were observed by Section staff and require action on behalf of the facility in order to come into or maintain compliance with the Statutes, Rules, and/or other regulatory requirements applicable to this facility. Be advised that pursuant to N.C.G.S. 130A-22, an administrative penalty of up to $15,000 per day may be assessed for each violation of the Solid Waste Laws, Regulations, Conditions of a Permit, or Order under Article 9 of Chapter 130A of the N.C. General Statutes. Further, the facility and/or all responsible parties may also be subject to enforcement actions including penalties, injunction from operation of a solid waste management facility or a solid waste collection service and any such further relief as may be necessary to achieve compliance with the North Carolina Solid Waste Management Act and Rules.

FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section

Page 2 of 2

ADDITIONAL COMMENTS

TRUCK LICENSE PLATE # VIN # TANK CAPACITY (gal)
FEA-1516 1GBJC34F5XF092892 400

1) After corrective actions (see observed violation), all lettering indicating firm name, town name, phone number, and septage management firm permit number were permanently attached to each side of each truck, were plainly visible and met height requirements. 2) The tank was constructed of metal and appeared to be structurally sound. 3) The tank was bolted to the bed of the truck.
4) The septage drain valve appeared to be in working order. No septage leaks were observed.
5) All port covers and caps where in place and appeared to be in proper working order.

Please contact me if you have any questions or concerns regarding this inspection report.

____________________________________________ Phone: [phone] .
Jeffrey Bullard, Environmental Specialist II Division of Waste Management, NCDEQ Regional Representative
Sent on: 7/5/2019 Email X Hand delivery US Mail Certified No. [ _]