NCS01066_INSP_20181231

FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section

Page 1 of 2

UNIT TYPE:
Lined MSWLF LCID YW Transfer Compost SLAS COUNTY: Alamance
Closed MSWLF HHW White goods Incin T&P FIRM x PERMIT NO.: 01066
CDLF Tire T&P / Collection Tire Monofill Industrial Landfill DEMO SDTF FILE TYPE: COMPLIANCE

Date of Site Inspection: 12/31/2019 Date of Last Inspection: N/A
FACILITY NAME AND ADDRESS:
Rowland Enviro. Septic & Grease Services 2538 Kimrey Rd. Mebane NC
GPS COORDINATES: N: NA E: NA
FACILITY CONTACT INFORMATION: Name: Allen Rowland Address: 2538 Kimrey Rd., Mebane NC Telephone: [phone]
Email address: [e-mail]

PARTICIPANTS: Allen Rowland(RE), Jeffrey Bullard (DWM) STATUS OF PERMIT: Active EXPIRES: 12/31/19
PURPOSE OF SITE VISIT: New truck inspection STATUS OF PAST NOTED VIOLATIONS:
N/A

OBSERVED VIOLATIONS:
None
The item(s) listed above were observed by Section staff and require action on behalf of the facility in order to come into or maintain compliance with the Statutes, Rules, and/or other regulatory requirements applicable to this facility. Be advised that pursuant to N.C.G.S. 130A-22, an administrative penalty of up to $15,000 per day may be assessed for each violation of the Solid Waste Laws, Regulations, Conditions of a Permit, or Order under Article 9 of Chapter 130A of the N.C. General Statutes. Further, the facility and/or all responsible parties may also be subject to enforcement actions including penalties, injunction from operation of a solid waste management facility or a solid waste collection service and any such further relief as may be necessary to achieve compliance with the North Carolina Solid Waste Management Act and Rules.

FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section

Page 2 of 2

ADDITIONAL COMMENTS

TRUCK LICENSE PLATE # VIN # TANK CAPACITY (gal)
YA144533 2NP2HJ7X3KM603369 2500

1) All lettering indicating firm name, town name, phone number, and septage management firm permit number were permanently attached to each side of each truck, were plainly visible and met height requirements. 2) Each tank was constructed of metal and appeared to be structurally sound. 3) The tank and truck body was bolted to the truck frame.
4) The septage drain valve appeared to be in working order. No septage leaks were observed. 5) All port covers and caps where in place and appeared to be in proper working order.

Please contact me if you have any questions or concerns regarding this inspection report.

____________________________________________ Phone: [phone] .
Jeffrey Bullard, Environmental Specialist II Division of Waste Management, NCDEQ Regional Representative

Sent on: 4/2/2019 Email X Hand delivery US Mail Certified No. [ _]