NCS01421_INSP_20190206

FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section

Page 1 of 2

UNIT TYPE:
Lined
MSWLF LCID YW Transfer Compost SLAS COUNTY: Alamance
Closed
MSWLF HHW White
goods Incin T&P FIRM X PERMIT NO.: NCS-01421
CDLF Tire T&P / Collection Tire Monofill Industrial Landfill DEMO SDTF FILE TYPE: COMPLIANCE

Date of Site Inspection: 2/06/2019 Date of Last Inspection: 2/13/2018

FACILITY NAME AND ADDRESS:
Kirby Septic Pumping
4057 Dickey Mill Road
Mebane, NC 27302

FACILITY CONTACT NAME AND PHONE NUMBER:
Name: Jeffrey Kirby
Telephone: [phone]
Email address: [e-mail]
Fax: N/A

FACILITY CONTACT ADDRESS:
Same as above

PARTICIPANTS:
Connie Wylie, Jeff Kirby

STATUS OF PERMIT:
Active – permit expires December 31, 2019

PURPOSE OF SITE VISIT:
New vehicle

STATUS OF PAST NOTED VIOLATIONS:
N/A

OBSERVED VIOLATIONS:
N/A

SEE BACK OF PAGE

The item(s) listed above were observed by Section staff and require action on behalf of the facility in order to come into or maintain compliance
with the Statutes, Rules, and/or other regulatory requirements applicable to this facility. Be advised that pursuant to N.C.G.S. 130A-22, an
administrative penalty of up to $15,000 per day may be assessed for each violation of the Solid Waste Laws, Regulations, Conditions of a Permit,
or Order under Article 9 of Chapter 130A of the N.C. General Statutes. Further, the facility and/or all responsible parties may also be subject to
enforcement actions including penalties, injunction from operation of a solid waste management facility or a solid waste collection service and any
such further relief as may be necessary to achieve compliance with the North Carolina Solid Waste Management Act and Rules.
FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section
Page 2 of 2

ADDITIONAL COMMENTS
1- Inspected replacement vehicle, no tag yet, VIN 2NP3LJ0XXKM620490, 4000 gallons. This firm will only run
on truck – the 2019 firm permit has been issued.
2- The tank appears structurally sound & securely attached. Outlet covers were on and no drips/leaks were noted.
The lettering is correct on both sides of the vehicle. This vehicle is in compliance at this time.
3- Discussed the required information to be maintained for the truck logs. Ensure that the gallons for each pump
job is listed (particularly in regards to the new vehicle with a 4,000 gallon capacity) and also each specific
discharge location. Enclosed is an example copy of the truck pumping log.
4- Mr. Kirby attended the Hickory training location in January.

Please contact me if you have any questions or concerns regarding this inspection report.

_ _ Phone: [phone]

Connie S. Wylie Regional Representative

Sent on: Email Hand delivery X US Mail Certified No. [ _]