HomeMy WebLinkAboutNCS01171_INSP_20181109FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section
Page 1 of 2
UNIT TYPE:
Lined MSWLF LCID YW Transfer Compost SLAS COUNTY: Durham
Closed MSWLF HHW White goods Incin T&P FIRM X PERMIT NO.: NCS-01171
CDLF Tire T&P / Collection Tire Monofill Industrial Landfill DEMO SDTF FILE TYPE: COMPLIANCE
Date of Site Inspection: 11/09/18 Date of Last Inspection: 11/6/2013
FACILITY NAME AND ADDRESS:
Gibbs
4649 Angier Ave Durham NC 27702
GPS COORDINATES: N: 35.939303° E: -78.822774°
FACILITY CONTACT INFORMATION:
Name: Charles Gibbs
Address: 4649 Angier Ave Durham NC 27702
Telephone: (919) 596-2438
Email address: NA
PARTICIPANTS: Charles Gibbs, Jeffrey Bullard (DWM)
STATUS OF PERMIT: Pending EXPIRES:
PURPOSE OF SITE VISIT: Pre-operational STATUS OF PAST NOTED VIOLATIONS: NA
OBSERVED VIOLATIONS:
No violations observed
The item(s) listed above were observed by Section staff and require action on behalf of the facility in order to come into or maintain compliance with the Statutes, Rules, and/or other regulatory requirements applicable to this facility. Be advised that pursuant to N.C.G.S. 130A-22, an
administrative penalty of up to $15,000 per day may be assessed for each violation of the Solid Waste Laws, Regulations, Conditions of a Permit, or Order under Article 9 of Chapter 130A of the N.C. General Statutes. Further, the facility and/or all responsible parties may also be subject to enforcement actions including penalties, injunction from operation of a solid waste management facility or a solid waste collection service and
any such further relief as may be necessary to achieve compliance with the North Carolina Solid Waste Management Act and Rules.
FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section
Page 2 of 2
TRUCK LICENSE PLATE # VIN # TANK CAPACITY (gal)
HR-1942 1HTSDAAN6WH568084 1550
AREAS OF CONCERN AND COMMENTS:
(1) All lettering indicating firm name, town name, phone number, and septage management firm permit
number were permanently attached to each side of the truck, were plainly visible and met height
requirements.
(2) The tank was constructed of metal and appeared to be structurally sound. (3) The tank and truck body were integrally built and bolted to the truck frame. (4) The septage drain valve appeared to be in working order. No septage leaks were observed.
(5) All port covers and caps where in place and appeared to be in proper working order.
(6) Truck logs were not required for new truck inspection.
Please contact me if you have any questions or concerns regarding this inspection report.
____________________________ Phone: (919) 707-8285 .
Jeffrey Bullard, Environmental Specialist II Division of Waste Management, NCDEQ Regional Representative
Sent on: 11/21/2018 Email X Hand delivery US Mail Certified No. [ _]