NCS01442_INSP_NEW VEHICLE_20181015

FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section

Page 1 of 2

UNIT TYPE:
Lined MSWLF LCID YW Transfer Compost SLAS COUNTY: Wayne
Closed MSWLF HHW White goods Incin T&P FIRM X PERMIT NO.: NCS-01442
CDLF Tire T&P / Collection Tire Monofill Industrial Landfill DEMO SDTF FILE TYPE: COMPLIANCE

Date of Site Inspection: 10/15/2018 Date of Last Inspection: 09/21/2018
FACILITY NAME AND ADDRESS:
Mr. Michael Spurgeon C&M Septic Inc. 5431 US 117 S Alt
Mt. Olive, NC 28365
GPS COORDINATES: N: NA E: NA
FACILITY CONTACT INFORMATION:
Name: Michael Spurgeon
Address: Same as above
Telephone: [phone] (cell)
Email address: [e-mail]
PARTICIPANTS: Chester Cobb (DWM), Jeff Bullard (DWM), and Michael Spurgeon
STATUS OF PERMIT: Active EXPIRES: 12/31/2018
PURPOSE OF SITE VISIT: New Vehicle
STATUS OF PAST NOTED VIOLATIONS:

OBSERVED VIOLATIONS:
NONE
The item(s) listed above were observed by Section staff and require action on behalf of the facility in order to come into or maintain compliance with the Statutes, Rules, and/or other regulatory requirements applicable to this facility. Be advised that pursuant to N.C.G.S. 130A-22, an administrative penalty of up to $15,000 per day may be assessed for each violation of the Solid Waste Laws, Regulations, Conditions of a Permit,
or Order under Article 9 of Chapter 130A of the N.C. General Statutes. Further, the facility and/or all responsible parties may also be subject to enforcement actions including penalties, injunction from operation of a solid waste management facility or a solid waste collection service and any such further relief as may be necessary to achieve compliance with the North Carolina Solid Waste Management Act and Rules.

FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section

Page 2 of 2

AREAS OF CONCERN AND COMMENTS:

TRUCK LICENSE PLATE # VIN # TANK CAPACITY (gal)
YA143082 1HTMMAAL14H667125 2,000

1) All required information was on both sides of the pump truck. All letters of the required information
were greater than three (3) inches in height.
2) Tank was made of steel and appeared to be structurally sound. Tank had been patched in several
locations.
3) Tank bolted to the frame of the truck.
4) Access ports properly sealed. No leaks noticed.
5) Valves appeared to be in working order. Caps present on the hose ports.
6) Truck past inspection.

0BDriver side of the pump truck. 1BPassenger side of the pump vehicle.

Please contact me if you have any questions or concerns regarding this inspection report.

____________________________ Phone: [phone] .
Chester R. Cobb, Soil Scientist Division of Waste Management, NCDEQ Regional Representative

Sent on: X Email Hand delivery US Mail Certified No. [ _]