HomeMy WebLinkAboutNCS00304_INSP_20180518FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section
Page 1 of 2
UNIT TYPE:
Lined MSWLF LCID YW Transfer Compost SLAS COUNTY: Johnston
Closed MSWLF HHW White goods Incin T&P FIRM X PERMIT NO.: NCS-00304
CDLF Tire T&P / Collection Tire Monofill Industrial Landfill DEMO SDTF FILE TYPE: COMPLIANCE
Date of Site Inspection: 5/18/2018 Date of Last Inspection: N/A
FACILITY NAME AND ADDRESS:
Stay Clean 670 Wiggins Road Angier, NC 27501
GPS COORDINATES: N: NA E: NA
FACILITY CONTACT INFORMATION:
Name: Gene Stephenson
Address: (919) 427-1623
Telephone: staycleaninc@yahoo.com
Email address: (919) 639-1091
PARTICIPANTS: Jeffrey Bullard (DWM) and Brian Dixon (operator)
STATUS OF PERMIT: Active EXPIRES: 12/31/2018
PURPOSE OF SITE VISIT: New Truck Inspection STATUS OF PAST NOTED VIOLATIONS: N/A
OBSERVED VIOLATIONS:
No Violations Observed
The item(s) listed above were observed by Section staff and require action on behalf of the facility in order to come into or maintain compliance with the Statutes, Rules, and/or other regulatory requirements applicable to this facility. Be advised that pursuant to N.C.G.S. 130A-22, an
administrative penalty of up to $15,000 per day may be assessed for each violation of the Solid Waste Laws, Regulations, Conditions of a Permit, or Order under Article 9 of Chapter 130A of the N.C. General Statutes. Further, the facility and/or all responsible parties may also be subject to enforcement actions including penalties, injunction from operation of a solid waste management facility or a solid waste collection service and
any such further relief as may be necessary to achieve compliance with the North Carolina Solid Waste Management Act and Rules.
FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section
Page 2 of 2
AREAS OF CONCERN AND COMMENTS:
TRUCK LICENSE PLATE # VIN # TANK CAPACITY (gal)
JB-7847 3FRWF75S97V487991 750 septage/300 fresh water
1)All lettering indicating firm name, town name, phone number, and septage management firm permit number were
permanently attached to each side of the truck and plainly visible. All lettering measured greater than 3 inches inheight.2)The tank was constructed of metal and appeared to be structurally sound.
3) The tank and truck body were integrally built and bolted to the truck frame.4)The septage drain valve appeared to be in working order. Minor leaking (several drips/minute) was observed at the
fresh water tank drain valve.
5)No septage leaks were observed.6) All port covers and caps where in place and appeared to be in proper working order.
7) Truck logs were not required for new truck inspection.
Please contact me if you have any questions or concerns regarding this inspection report.
____________________________ Phone: (919) 707-8285 . Jeffrey Bullard, Environmental Specialist II
Division of Waste Management, NCDEQ Regional Representative
Sent on: Email Hand delivery US Mail Certified No. [ _]