NCS00611_INSP_NEW VEHICLE_20180531

FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section

Page 1 of 2

UNIT TYPE:
Lined MSWLF LCID YW Transfer Compost SLAS COUNTY: Martin
Closed MSWLF HHW White goods Incin T&P FIRM X PERMIT NO.: NCS-00611
CDLF Tire T&P / Collection Tire Monofill Industrial Landfill DEMO SDTF FILE TYPE: COMPLIANCE

Date of Site Inspection: 05/31/18 Date of Last Inspection:
FACILITY NAME AND ADDRESS:
Mr. Mort Hurst Robersonville Ice & coal Inc. 202 E. Railroad Str.
Robersonville, NC 27871
GPS COORDINATES: N: NA E: NA
FACILITY CONTACT INFORMATION:
Name: Mr. Mort Hurst
Address: PO Box 106 – Robersonville, NC 27871
Telephone: [phone]
Email address: NA
PARTICIPANTS: Chester Cobb (DWM), Jeff Bullard (DWM), Mort Hurst
STATUS OF PERMIT: Active EXPIRES: 12/31/2018
PURPOSE OF SITE VISIT: New Vehicle
STATUS OF PAST NOTED VIOLATIONS:
No recent violations.

OBSERVED VIOLATIONS:
NONE
The item(s) listed above were observed by Section staff and require action on behalf of the facility in order to come into or maintain compliance with the Statutes, Rules, and/or other regulatory requirements applicable to this facility. Be advised that pursuant to N.C.G.S. 130A-22, an administrative penalty of up to $15,000 per day may be assessed for each violation of the Solid Waste Laws, Regulations, Conditions of a Permit,
or Order under Article 9 of Chapter 130A of the N.C. General Statutes. Further, the facility and/or all responsible parties may also be subject to enforcement actions including penalties, injunction from operation of a solid waste management facility or a solid waste collection service and any such further relief as may be necessary to achieve compliance with the North Carolina Solid Waste Management Act and Rules.

FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section

Page 2 of 2

AREAS OF CONCERN AND COMMENTS:

TRUCK LICENSE PLATE # VIN # TANK CAPACITY (gal)
HP-4824 1FDNF7AY1JDF00854 2,000

1) Inspected a new pumper vehicle. Vehicle information noted above. They will be getting rid of one of
the trucks.
2) The pumper vehicle had all the required labeling. All letters of the required labeling were greater than
three (3) inches in height. See pictures below.
3) Tank made of aluminum. Tank appears to be structurally sound.
4) Tank bolted to the frame of the truck.
5) Access ports seemed to be properly sealed. Valves appear to be in working order.
6) No leaks noticed. Caps present on the hose ports.
7) Did not review records.
8) Truck passed inspection.

0BPicture of the driver side of the truck. 1BPicture of the passenger side of the truck.

Please contact me if you have any questions or concerns regarding this inspection report.

____________________________ Phone: [phone] . Chester R. Cobb, Soil Scientist
Division of Waste Management, NCDEQ Regional Representative

Sent on: 06/04/18 Email Hand delivery X US Mail Certified No. [ _]