NCS01437_INSP_20180705

FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section
Page 1 of 2
UNIT TYPE:
Lined
MSWLF LCID YW Transfer Compost SLAS COUNTY: Davidson
Closed
MSWLF HHW White
goods Incin T&P FIRM X PERMIT NO.: NCS-01437
CDLF Tire T&P / Collection Tire Monofill Industrial Landfill DEMO SDTF FILE TYPE: COMPLIANCE
Date of Site Inspection: July 5, 2018 Date of Last Inspection: Initial Inspection
FACILITY NAME AND ADDRESS:
Hulin Septic Tank
1494 Wright Road
Lexington, North Carolina 27292
FACILITY CONTACT NAME AND PHONE NUMBER:
Name: Paul Allen Hulin
Telephone: [phone]
Email address: [e-mail]
FACILITY CONTACT ADDRESS:
Same as above
PARTICIPANTS:
Paul Allen Hulin, Owner – Hulin Septic Tank
Charles Gerstell, NCDEQ – Solid Waste Section
STATUS OF PERMIT:
An Application for a Permit to Operate a Septage Management Firm has been received by the Solid Waste Section.
PURPOSE OF SITE VISIT:
New Truck Inspection
STATUS OF PAST NOTED VIOLATIONS:
N/A
OBSERVED VIOLATIONS:
None
The item(s) listed above were observed by Section staff and require action on behalf of the facility in order to come into or maintain compliance
with the Statutes, Rules, and/or other regulatory requirements applicable to this facility. Be advised that pursuant to N.C.G.S. 130A-22, an
administrative penalty of up to $15,000 per day may be assessed for each violation of the Solid Waste Laws, Regulations, Conditions of a Permit,
or Order under Article 9 of Chapter 130A of the N.C. General Statutes. Further, the facility and/or all responsible parties may also be subject to
enforcement actions including penalties, injunction from operation of a solid waste management facility or a solid waste collection service and any
such further relief as may be necessary to achieve compliance with the North Carolina Solid Waste Management Act and Rules.
FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section
Page 2 of 2
ADDITIONAL COMMENTS
1. This inspection was performed in order to determine if the company vehicle complied with all applicable solid
waste rules.
2. The tank appeared to be structurally sound and secured to the frame.
3. Valves and access ports on the vehicle were secure and appeared to be in proper working order. Caps were present
on all access ports to prevent leaks.
4. The vehicle was properly marked based on all applicable requirements.
5. Vehicle information is as follows:

License Tag Vehicle Identification Tank Capacity
YA14194 2FZAAKBV31AH62952 3,000

x Please note, the management firm application indicates that the tank on the vehicle has a capacity of
2,000-gallons. However, the actual tank capacity is 3,000-gallons. Mr. Hulin stated that he is only able
to haul 2,000-gallons to ensure that the truck does not exceed weight limits. He plans to place the tank
on a larger vehicle in the future.
Photo of vehicle taken by C. Gerstell on 7/5/18. Photo of vehicle taken by C. Gerstell on 7/5/18.
Please contact me if you have any questions or concerns regarding this inspection report.
________________________________________ Phone: [phone]
Charles T. Gerstell
Environmental Senior Specialist
Regional Representative
Sent on: 7/5/18 X Email Hand delivery US Mail Certified No. [ _]
Copies: Deb Aja, Western District Supervisor - Solid Waste Section
Troy Harrison, Environmental Senior Specialist – Solid Waste Section
Chester Cobb, Soil Scientist – Solid Waste Section
Digitally signed by Charles T. Gerstell
DN: cn=Charles T. Gerstell, o=Divsion of Waste
Management, ou=Solid Waste Section,
email=[e-mail], c=US
Date: 2018.07.05 13:01:49 -04'00'