9237T_INSP_20180424

FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section

Page 1 of 3

UNIT TYPE:
Lined
MSWLF LCID YW Transfer X Compost SLAS COUNTY: WAKE
Closed
MSWLF HHW White
goods Incin T&P FIRM PERMIT NO.: 9237T-TRANSFER-2010
CDLF Tire T&P / Collection Tire Monofill Industrial Landfill DEMO SDTF FILE TYPE: COMPLIANCE

Date of Site Inspection: April 24, 2018 Date of Last Inspection: February 2, 2018

FACILITY NAME AND ADDRESS:
Capitol Waste C&D Transfer Station
424 Warehouse Drive
Raleigh, NC 27610-3996

GPS COORDINATES: N: 35.75217 W: -78.63345

FACILITY CONTACT NAME AND PHONE NUMBER:
David King, 919-427-4104, [e-mail]
Hunter King, 919-876-8485, [e-mail]
Katie Kessing, 919-876-8485, [e-mail]

FACILITY CONTACT ADDRESS:
Same as above

PARTICIPANTS:
Liz Patterson, NCDEQ - Solid Waste Section
Angel Bentancourt, Capitol Waste Transfer, LLC

STATUS OF PERMIT:
Original Issue Permit to Construct and Operate May 4, 2007
Permit To Operate (PTO) Change in Ownership issued June 15, 2010
Permit To Operate (PTO) Amendment issued April 2, 2013
PTO expiration date is May 4, 2017
PTO issued July 27, 2017, Life of Site

PURPOSE OF SITE VISIT:
Comprehensive Inspection

STATUS OF PAST NOTED VIOLATIONS:
None

OBSERVED VIOLATIONS:
None

The item(s) listed above were observed by Section staff and require action on behalf of the facility in order to come into or maintain compliance
with the Statutes, Rules, and/or other regulatory requirements applicable to this facility. Be advised that pursuant to N.C.G.S. 130A-22, an
administrative penalty of up to $15,000 per day may be assessed for each violation of the Solid Waste Laws, Regulations, Conditions of a Permit,
or Order under Article 9 of Chapter 130A of the N.C. General Statutes. Further, the facility and/or all responsible parties may also be subject to
enforcement actions including penalties, injunction from operation of a solid waste management facility or a solid waste collection service and any
such further relief as may be necessary to achieve compliance with the North Carolina Solid Waste Management Act and Rules.
FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section

Page 2 of 3

ADDITIONAL COMMENTS
The facility is a transfer facility for construction and demolition (C&D) debris. The facility is permitted to receive C&D
debris, inert debris, land clearing debris (LCD), and used asphalt from Wake, Johnston, Harnett, Chatham, Orange,
Durham, Granville, Franklin, and Nash Counties. The facility PTO issued July 27, 2017, Life of Site.

1. The facility is in operation Monday through Friday, 7:00 am – 4:00 pm. When not in operation, the facility is
secured by a locked gate. The facility has proper signage.
2. The facility is permitted to receive “Construction or demolition debris”, inert debris, used asphalt, and land-
clearing debris from Wake, Johnston, Harnett, Chatham, Orange, Durham, Granville, Franklin, and Nash
counties. All C&D waste that is not recycled must be transported for disposal to the Shotwell Landfill located
in Wendell, Permit Number 92-26; the Red Rock Disposal C&D Landfill in Holly Springs,
Permit Number 92-28; or the Material Recovery C&D Landfill in Raleigh, Permit Number 92-31
3. The following are facility certified personnel:
John C. Osburn – Transfer Station Operations Specialist, TS-2015086, expires November 5, 2018
Angel R. Bentancourt - Transfer Station Operations Specialist, TS-2012045, expires June 22, 2018
Amber N. Bunn - Transfer Station Operations Specialist, TS-2014027, expires May 9, 2020
Katie K. Webb - Transfer Station Operations Specialist, TS-2015099, expires November 5, 2018
4. The facility Permit and Operation Plan were readily available.
5. Reviewed waste screening records for February 1, 2018 through April 24, 2018. Waste screening records were
well organized. Reminded facility that the Solid Waste Section recommends that 1% of incoming waste be
screened by the random screening program. Current waste screening meets or exceeds that target. Good job!
6. All waste staged for transport and operational areas where waste may be piled up for processing must be
managed on an impervious surface that will not allow leachate to come in contact ground or surface waters.
7. Wood was segregated from the incoming waste and stored behind the tipping area. Wood is sent offsite for
grinding.
8. Concrete is stored until it is crushed periodically onsite. Painted block, concrete and asphalt delivered to the
facility must be checked for lead paint prior to acceptance. Painted block, brick and asphalt at the facility must
be removed and properly disposed of.
9. Except for inert debris, all recyclables must be sorted and stored in containers by the end of each operating day.
Containers must be covered at the end of each operating day, and during precipitation events. All non-
recyclables in the sorting area must be placed in transfer trailers for disposal by the end of each operating day.
10. Tires are removed from incoming waste and are sent to a permitted tire facility.
11. Fire control will be addressed by the local fire department. The facility has fire extinguishers and a water hose.
12. Windblown waste at the site well controlled.

Please contact me if you have any questions or concerns regarding this inspection report.

Phone: [phone](O)
[e-mail]
Liz Patterson
Environmental Senior Specialist
Regional Representative

Sent on: 5-16-2018 X Email Hand delivery US Mail Certified No. [ _]

Copies: Drew Hammonds, Eastern District Supervisor - Solid Waste Section
FACILITY COMPLIANCE INSPECTION REPORT
Division of Waste Management
Solid Waste Section

Page 3 of 3

Digital pictures taken by Liz Patterson on April 24, 2018

Tipping area

Concrete area