NCG080298_Ltr re Compliance Eval_20190613

ROY COOPER
Governor
MICHAEL S. REGAN
Secretary
WILLIAM E. (TOBY)'t NSQN, JR.
Intertm Director
Stegall Milling Co Incorporated
Attention: Zach Stegall
307 Cross Street
Marshville NC 28103
NORTH CAROLINA
Environmental Quality
June 13, 2019
Subject: Compliance Evaluation Inspection
Stegall Milling Co Incorporated
NPDES Stormwater Certificate of Coverage- NCG080298
Union County, North Carolina
Dear Mr. Stegall:
R F7 ;, F:1 N1/
JUN 2 0 2019
DENR-LAND QUALITY
STORtoU�'A1 ER PEF:(mJ"?l [TING
Enclosed please find a copy of the Compliance Evaluation Inspection Report for
the inspection we conducted at the Stegall Milling in Marshville on June 11, 2019.
Please note that in the stormwater inspection report summary we ask that you apply
for a No Exposure Certification once all outside material storage has ceased
The report should be self-explanatory; however, should you have any questions,
please do not hesitate to contact me at [phone] or by E-mail at
[e-mail].
Enclosure
c: Stormwater Permitting Branch
Sincerely,
A=Moore
Assistant Regional Engineer
z��D.EQi�
N YATT�..b_UNA
uep✓aeri4 0l EmkaYaunbldp�Ntp
North Carolina Department of Environmental Quality E Division of Energy, Mineral and Land Resources
Mooresville Regional Office 1 610 East Center Avenue. Suite 301 1 Mooresville, North Carolina 26115
704.663.1699

Permit: NCG080298
SOC:
County: Union
Region: Mooresville
Contact Person: Tom Stegall
Directions to Facility:
System Classifications:
Primary ORC:
Secondary ORC(s):
On -Site Representative(s):
Related Permits:
Inspection Date: 06/11/2019
Primary Inspector: Lily C Kay
Secondary Inspector(s):
Compliance Inspection Report
Effective: 11/01/18 Expiration: 05/31/21 owner: Stegall Milling Co Inc
Effective: Expiration: Facility: Stegall Milling Co Incorporated
307 Cross St
Title:
Entry Time: 10:30AM
Certification:
Marshville NC 28103
Phone: [phone]
Phone:
Exit Time: 11:00AM
Phone: [phone]
Reason for Inspection: Routine Inspection Type: Compliance Evaluation
Permit Inspection Type: Transportation wNehicle Maintenance/Petroleum Bulk/Oil Water Separator Stormwater Discharge COC
Facility Status: ❑ Compliant Not Compliant
Question Areas:
Storm Water
(See attachment summary)
Page 1 of 3

Permit: NCO080208 Owner - raciiity: Stegall Milling Co Inc
Inspection Date: 06/11/2019 Inspection Type : Compliance Evaluation Reason for Visit: Routine
Inspection Summary:
Stegall Milling is a transportation facility for fowl products. They are currently under the correct general permit, but the
facility does not have much outside storage of materials. If those materials are removed, the permittee can apply for a "No
Exposure Certification" with the Raleigh office by going to
hftps://deq.nc.gov/abouttdivisions/energy-mineral-land-resources/npdes-no-exposure and following the instructions on that
page. If you have any questions, please contact me at Lily. [e-mail] or by phone at [phone].
Page 2 of 3