Loading...
HomeMy WebLinkAbout20081602 Ver 1_Email_20081212RE R-2414A Bridge Question Subject: RE R-2414A Bndge Question From: "Turchy, Michael A" <maturchy@ncdot gov> Date: Fn, 12 Dec 2008 16 22 20 -0500 To: David Wainwnght <David Wamwnght@ncmail net> David, Attached is the new R-2414A Permit Drawing Sheet 36 with the bridge bents on the drawing, per your request If you'd like a paper copy, I'll be happy to send that to you as well Thanks, -Michael -----Original Message----- From David Wainwright (mailto David Wainwrlght@ncmail net] Sent Thursday, December 04, 2008 7 07 AM To Turchy, Michael A Subject Re R-2414A Bridge Question Michael, Thank you for looking into this The drawing I have (sheet 36 of 36) shows the structure as a single span, with no bents Would you be able to send an updated drawing showing the three span bridge and where the bents would be located and, dust to be on the safe side, verify that there will be no open water impacts associated with the bents Thank you David Wainwright NCDENR, Division of Water Quality Transportation Permitting Unit Raleigh, NC David wainwrightancmail net 919-715-3415 Turchy, Michael A wrote David, Last week you had a question regarding the number of spans and span arrangement for culvert we are replacing with a bridge on R-2414A in Camden County Here's the responses that I received The bridge will be a 3 span structure, 1@30',1@401,1@301, and the piers will be located in the bank of the excavated channel and within the normal water surface We looked at a single span structure, but the grade would have to be raised due the taller beam, and then we'd have higher wetland impacts Structurally, a 2 span structure would have worked, but then navigation would be obstructed, therefore defeating the purpose of the bridge Please let me know if you have any other questions Michael Michael Turchy, Environmental Supervisor North Carolina Department of Transportation PDEA I Natural Environment Unit 1598 Mail Service Center 1 of 2 12/18/2008 8 34 AM 1tE R-2414A Bridge Question Raleigh, NC 27699-1598 voice 919 715 1468 I fax 919 715 5501 _http //ncdot gov/doh/preconstruct/pe/neu/ R-2414A Permit Content-Description: Drawing sheet 36 of 36 with R-2414A Permit Drawing sheet 36 of 36 with Bents.pdf Bents pdf Content-Type: application/pdf Content-Encoding: base64 2 of 2 12/18/2008 8 34 AM