SW6130203_Designer Certification_20130422

State Stormwater Permit
Permit No. SW6130203
Family Dollar Store #705283 Spout Springs, North Carolina
Stormwater Permit No. SW6130203
Harnett County
Designer's Certification
i James F. Chandler, Jr. , as a duly registered Professional Engineer in the
State of North Carolina, having been authorized to observe (periodically/ weekly/ full
time) the construction of the project,
Infiltration Basin for the aforementioned Family Dollar Store
(Project)
for Allied Development, Inc. (Project Owner) hereby state that, to the
best of my abilities, due care and diligence was used in the observation of the project
construction such that the construction was observed to be built within substantial
compliance and intent of the approved plans and specifications.
The checklist of items on page 2 of this form is included in the Certification.
Noted deviations from approved plans and specification:
Signature
Registration Wmber 026466
Date 10-19-14
RECEIVED
OCT 2 2 2014
SEAL
,95H'CA, �i•••
,. gyp..F...... Roe
,.•ESS, •. �y •;
e ¢ 1.
SEAL 9:
N ; 026466
Page 5 of 6
DENR-FAYETTEMLLE REGI AM, ""

State Stormwater Permit
Permit No. SW6130203
Certification Requirements:
X 1.
The drainage area to the system contains approximately the permitted
acreage.
X 2.
The drainage area to the system contains no more than the permitted
amount of built -upon area.
x 3.
All the built -upon area associated with the project is graded such that the
��� /
runoff drains to the system.
via e
All roof drains are located such that the runoff is directed into the system.
o„ �0J23 14
The bypass structure weir elevation is per the approved plan.
N/A 6.
The bypass structure is located per the approved plans.
NSA 7.
A Trash Rack is provided on the bypass structure.
X 8.
All slopes are grassed with permanent vegetation.
X 9.
Vegetated slopes are no steeper than 3:1.
X 10.
The inlets are located per the approved plans and do not cause short-
circuiting of the system.
X 11.
The permitted amounts of surface area and/or volume have been
provided.
X 12.
All required design depths are provided.
X 13.
All required parts of the system are provided.
X 14.
The required system dimensions are provided per the approved plans.
cc: NCDENR-DWQ Fayetteville Regional Office
225 Green Street
Systel Building, Suite 714
Fayetteville, NC 28301-5043
Ken Slattum, Harnett County Building Inspections
Page 6 of 6