NCG020179_2022 DMR_20220729

NCDEQ Division of Energy, Mineral and Land Resources
Stormwater Discharge Monitoring Report (DMR) Form for N00020000
Active and Inactive Mining Sites
Click here for instructions
Complete, sign, scan and submit the DMR via the Stormwater NPDES Permit Data Monitoring Report (DMR) Upload form. Mail the
original, signed hard copy of the DMR to the appropriate DEMLR Regional Office.
Certificate of Coverage No. NCG020179
Person Collecting Samples: MM Staff
Facility Name: Haw River Quarry
Laboratory Name: Pace Analytical Services
Facility County: Alamance
Laboratory Cert. No.: 633
Discharge during this period: ❑ Yes ❑ No (if no, skip to signature and date)
Has your facility implemented mandatory Tier response actions this sample period for any benchmark exceedances? ❑ Yes No
If so, which Tier (I, 11, or III)?
A copy of this DMR has been uploaded electronically via https://edocs.dg2.nc.gov/Forms/SW-DMR es ❑ No
Date Uploaded:
Analytical Monitoring Requirements for Outfalls with Industrial Activities — Benchmarks in (Red)
Parameter
Code
Parameter
Outfall
Outfall
Outfall
Outfall
Outfall
N/A
Receiving Stream Class
WS-V; NSW
WS-V; NSW
WS-V; NSW
N/A
Date Sample Collected MM/DD/YYYY
46529
24-Hour Rainfall in inches
00545
Settleable Solids (SS) (0.1 mg/1)
C0530
TSS in mg/L (100 or 50*)
00070
Turbidity of discharge*"
Turbidity downstream of discharge**
-I
Turbidity upstream of discharge"
Additional parameters for outfalls in drainage areas that use >55 gallons per month of new hydraulic oil on average
NCOIL
Estimated New Motor/Hydraulic Oil
Usage in gal/month
00552
Non -Polar Oil & Grease in mg/L (25)
Additional parameters for Clay Mines
01105
Aluminum, total in mg/L (0.75 FW,
0.24 SW)
01092
Zinc, total (as Zn) in mg/L (0.126 FW,
0.095 SW)
00951
Fluoride, total in mg/L (6.0)
00900
Hardness, total
00400
pH, in standard units (6.0-9.0 FW,
6.8-8.5 SW)
01097
Antimony, total in mg/L (0.34 FW,
N/A SW)
01002
Arsenic, total in mg/L (0.15 FW, 0.069
SW)
C0034
Chromium III in mg/L (0.905 FW, N/A
SW)
Additional parameters for Feldspar Ore Mines
01105
Aluminum, total in mg/L (0.75 FW,
0.24 SW)
01092
Zinc, total (as Zn) in mg/L (0.126 FW,
0.095 SW)

00951
1 Fluoride, total in mg/L (6.0)
Additional parameters for Lithium Ore Mines
01105
Aluminum, total in mg/L (0.75 FW,
0.24 SW)
00951
Fluoride, total in mg/L (6.0)
Additional parameters for Phosphate Mines
00951
Fluoride, total in mg/L (6.0)
39344
Alpha, Gross Particle Activity
Additional parameters for Industrial Sand Mines
00951
Fluoride, total in mg/L (6.0)
CO0334
Chromium III in mg/L (0.905 FW, N/A
SW)
39344
Alpha, Gross Particle Activity
VULIOI13 LU vuuLanu1F1g Resource waters (uKVV), high Quality Waters (HQW), Trout Waters (Tr) and Primary Nursery Areas (PNA)
have a benchmark TSS limit of 50 mg/L. All other water classifications have a benchmark of 100 mg/L
** See F-5 of the NCG020000 General Permit for turbidity requirements.
FW (Freshwater) SW (Saltwater)
Notes (optional):
"I certify by my signature below, under penalty of law, that this document and all attachments were prepared under my direction or supervision in
accordance with a system designed to assure that qualified personnel properly gather and evaluate the information submitted. Based on my
inquiry of the person or persons who manage the system, or those persons directly responsible for gathering the information, the information
submitted is, to the best of any knowledge and belie accurate, and complete. I am aware that there are significant penalties for submitting
fats ' iaKn, including ti\e pos il�of fine and i0risonment for knowing violations."
` / 7/28/2022
Signature of P r ittee or Delegate4 Authorize, dividual Date
phillip.pressley@martinmarietta. m [phone]
Email Address Phone Number