NCGNE0428_Inspection Report_20210225

ROY COOPER
Governor
MICHAEL S. REGAN
Secretary
BRIAN WRENN
Director
Borg Warner Remanufacturing
Attention: Pete Kohler
1849 Brevard Road
Arden, North Carolina 28704
NORTH CAROLINA
Environmental Quality
February 25, 2021
Subject: No Exposure Certification
Compliance Evaluation Inspection
Borg Warner Remanufacturing
Certification Number: NCGNE0428
Henderson County, North Carolina
Dear Mr. Kohler:
Enclosed please find a copy of the Compliance Evaluation Inspection Report for the
inspection I conducted at the subject facility on February 23, 2021.
The report should be self-explanatory; however, should you have any questions
concerning this report, please do not hesitate to contact me at [phone] or by email
at [e-mail].
Isaiah Reed, EI, CPSWQ, P
Environmental Specialist
Land Quality Section
Enclosure: Inspection Report
North Carolina Department of Environmental Quality I Division of Energy, Mineral and Land Resources
Asheville Regional Office 1 2090 U.S. Highway 70 1 Swannanoa, North Carolina 28778
NOPiH CAT'M.INP
mmmmuwa�wow� /`� 828.296.4500

Compliance Inspection Report
Permit: NCGNE0428 Effective: 01/07/08 Expiration:
SOC: Effective: Expiration:
County: Henderson
Region: Asheville
Contact Person: Pete Kohler Title:
Directions to Facility:
System Classifications:
Primary ORC:
Secondary ORC(s):
On -Site Representative(s):
Related Permits:
Inspection Date: 02/23/2021
Primary Inspector: Isaiah L Reed
Secondary Inspector(s):
Certification:
Owner: Borg Warner Remanufacturing
Facility: Borg Warner Remanufacturing
280 Cane Creek Rd
Fletcher NC 28732
Phone:[phone]
Phone:
Entry Time 11:30AM Exit Time: 12:OOPM
Phone: [phone]
Reason for Inspection: Routine Inspection Type: Compliance Evaluation
Permit Inspection Type: Stormwater Discharge, No Exposure Certificate
Facility Status: ❑ Compliant ❑ Not Compliant
Question Areas:
Miscellaneous Questions Misc
(See attachment summary)
Page 1 of 3

permit: NCGNE0428 Owner - Facility: Borg Warner Remanufacturing
Inspection Date: 02/23/2021 Inspection Type: Compliance Evaluation Reason for visit: Routine
Inspection Summary:
On February 23, 2021 this facility was visited for an inspection. During the visit, it was confirmed that the facility is covered
under two separate No Exposure Certifications. It is recommended that a rescission request be submitted as soon as
possible for the certification if Borg Warner is no longer operating at this location.
If you have any questions, please contact this office at [phone]
Page 2 of 3

Permit: NCGNE0428 Owner - Facility: Borg Warner Remanufacturing
Inspection Date: 02/23/2021 Inspection Type: Compliance Evaluation Reason for Visit: Routine
MISC Yes No NA NE
Is the facility compliant? ❑ ❑ ❑
Comment:
Page 3 of 3