WI0400176_Application_20170828

North Carolina Department of Environmental Quality — Division of Water Resources
APPLICATION FOR PERMIT TO CONSTRUCT AND/OR USE A WELL(S) FOR INJECTION
In Situ Groundwater Remediation (15A NCAC 02C .02251 / Tracer Injection (15A NCAC 02C .0229)
Do not use this form for the following:
• In -situ remediation, tracer, or aquifer test injection wells permitted by rule (ref. 15A NCAC 02C .0217)
• remediation systems that reinject treated contaminated groundwater (Non -discharge) (ref. 15A NCAC 02T .1600)
Permit Number (to be completed by DWR):
I. APPLICATION INFORMATION
1. Project is: [ ] New [ ] Modification [X ] Renewal without modification [ ] Renewal with modification
2. If this application is being submitted for Renewal and/or Modification to an existing permit, provide:
(a.) Existing permit number WI0400176 Issued Date: 4/15/13 & Expiration Date: 3/31/18
For all Renewals, submit a status report including monitoring results of all injection activities to date.
For Renewal without modification only, fill out sections I & II only, sign the certification on the last page of this
form,
and obtain the property owner's signature to indicate consent (if the applicant is not the owner).
II. WELL OWNER(S)/PERMIT APPLICANT (generally the responsible parry)
1. Name(s):SURRY COUNTY LANDFILL
2. Signing Official's Name*:DENNIS BLEDSOE Title:Public Works Director
* Signing Official must be in accordance with instructions in Part X on page 5.
3. Mailing address of Permittee/Applicant: PO Box 342
City: DOBSON State: NC Zip: 27017
4. Telephone number: Email:
5. Status (choose one): Individual Business/Org. Federal State X County Municipality
III. PROPERTY OWNER(S) (if different than well owners)
1. Name(s):
2. Mailing address:
City:
3. Telephone number: Email:
State: Zip:
IV. PROJECT CONTACT — (generally the environmental/engineering consultant).
1. Name: JONATHAN PFOHL Title: SENIOR ENVIRONMENTAL SPECIALIST
2. Company: MUNICIPAL ENGINEERING SERVICES CO, PA
3. Address: PO BOX 97
4. City: GARNER State: NC Zip: 27529
5. Telephone number: 919.772.5393 Email: JPFOHLkMESCO.COM
In -Situ Groundwater Remediation Application Rev. 8-28-2017 Page 1 of 6

V. FACILITY INFORMATION
1. Facility name: Phone No. if available:
2. Physical address:
City:
3. Geographic Coordinates: Latitude:
4. Brief description
County:
Longitude:
Zip:
Reference Datum: Accuracy:
Method of Collection (i.e., Google Earth, GPS, etc.):
VI. INCIDENT DESCRIPTION
1. Source and date of contamination:
2. List all contaminants present in soils or groundwater at the site (contaminants may be listed in groups, e.g., gasoline,
diesel, jet fuel, fuel oil, chlorinated ethenes, chlorinated ethanes, metals, pesticides/herbicides, etc):
3. Has LNAPL or DNAPL ever been observed at the site (even if outside the injection zone)?
[ ] Yes If yes, list maximum measured separate phase thickness: feet
[ ] No If no, list maximum concentration of total VOCs observed at site: ppb
4. Agency managing the contamination incident:
[ ] UST Section [ ] Superfund Section (including REC Program and DSCA sites)
[ ] DWR Aquifer Protection Section [ ] Solid Waste Section
[ ] Hazardous Waste Section [ ] Other:
5. Incident manager's name: Phone No.:
6. Incident number or other incident mgmt. agency tracking number:
VII. PERMITS
List all applicable permits or construction approvals issued for the facility or incident:
1. Previous or other UIC permits issued by DWR (e.g., NOIs)
2. Other Non -Discharge or NPDES permit issued by DWR:
3. County or DEH subsurface wastewater disposal permits:
4. Hazardous waste management or other environmental permits required by state or federal law:
In -Situ Groundwater Remediation Application Rev. 8-28-2017 Page 2 of 6

VIII. INJECTION SUMMARY
1. List all proposed injectants/additives.
NOTE: Only injectants approved by the epidemiology section of the NC Division of Public Health, Department
of Health and Human Services can be injected. Approved injectants can be found online at
htta:Hdea.nc. izov/about/divisions/water-resources/water-resources-hermits/wastewater-branch/found-water-
protection/gxound-water-approved-injectants.
All other substances must be reviewed by the DHHS prior to use.
Contact the UIC Program
for more info (919-807-6496) if you wish to get approval for a different additive.
However, please note it may take 3 months or longer.
Injectant:
Total Amt. to be injected (gal)/event
Injectant:
Total Amt. to be injected (gal)/event
Injectant:
Total Amt. to be injected (gal)/event
Injectant:
Total Amt. to be injected (gal)/event
Injectant:
Total Amt. to be injected (gal)/event
2. Number of separate injection events: Duration of Event:
3. Estimated Injection rate per well: gallons per minute (GPM)
4. Estimated Injection pressure: pounds/square inch (PSI)
5. Temperature at point of injection: OF
6. Injection will be via:
( Existing well(s); Total No.: ; Well Type (DPT, Permanent, etc.):
( Proposed well(s); Total No.: ; Well Type (DPT, Permanent, etc.):
7. NC Certified Well Drilling Contractor's Name (if known):
NC Well Contractor Certification No.:
8. Date to be constructed if proposed: (attach GW-1 s for existing injection wells)
9. Screened interval/Injection interval of injection wells:
Depth from to feet below land surface (BLS)(if multiple intervals, indicate shallowest
to deepest depth)
10. Well casing (leave blank if Geoprobes ):
Type: ( PVC ( Stainless steel( Other:_
Casing depth: to ft. BLS
Type: ( PVC ( Stainless steel( Other:_
Casing depth: to ft. BLS
11. Grout (leave blank if Geoprobes):
Type: ( Cement ( Bentonite ( Other:
Grout depth: to ft. BLS
Type: ( Cement ( Bentonite ( Other:
Grout depth: to ft. BLS
In -Situ Groundwater Remediation Application Rev. 8-28-2017 Page 3 of 6

IX. ATTACHMENTS — provide the following information in separate attachments. The attachments should be
clearly identified and presented in the order below to expedite review of the permit application package.
1. INJECTION ZONE — Per 15A NCAC 02C .0225(e)(2), specify the horizontal and vertical portion of the subsurface within
which the proposed injection activity will take place and beyond which no violations of groundwater quality standards
shall result from the injection as determined by an approved monitoring plan. The determination shall be based on the
hydraulic properties of the specified zone. Provide any supporting documentation in a separate attachment.
2. HYDROGEOLOGIC EVALUATION — Per 15A NCAC 02C .0225(e)(3), provide a hydrogeologic evaluation of the
injection zone that includes all of the following:
(A) Regional and local geology and hydrology;
(B) Changes in lithology underlying the facility;
(C) Depth to bedrock;
(D) Depth to the mean seasonal high water table;
(E) Hydraulic conductivity, transmissivity, and storativity, of the injection zone based on tests of site -specific
material, including a description of the test(s) used to determine these parameters;
(F) Rate and direction of groundwater flow as determined by predictive calculations or computer modeling; and
(G) Lithostratigraphic and hydrostratigraphic logs of any existing test and injection wells.
3. INJECTANT INFORMATION — Per 15A NCAC 02C .0225(e)(5), provide information on each injectant as indicated below:
(A) MSDS, concentration at the point of injection, and percentage if present in a mixture with other injectants;
(B) The source of fluids used to dilute, carry, or otherwise distribute the injectant throughout the injection zone. If
any well within the area of review of the injection facility is to be used as the fluid source, then the following
information shall be submitted: location/ID number, depth of source, formation, rock/sediment type, and a
chemical analysis of the water from the source well, including analyses for all contaminants suspected or
historically recognized in soil or groundwater on the site;
(C) A description of the rationale for selecting the injectants and concentrations proposed for injection, including an
explanation or calculations of how the proposed injectant volumes and concentrations were determined;
(D) A description of the reactions between the injectants and the contaminants present including specific breakdown
products or intermediate compounds that may be formed by the injection;
(E) A summary of results if modeling or testing was performed to investigate the injectant's potential or susceptibility
for biological, chemical, or physical change in the subsurface; and
(F) An evaluation concerning the development of byproducts of the injection process, including increases in the
concentrations of naturally occurring substances. Such an evaluation shall include the identification of the specific
byproducts of the injection process, projected concentrations of byproducts, and areas of migration as determined
through modeling or other predictive calculations.
4. INJECTION PROCEDURE — Per 15A NCAC 02C .0225(e)(6), submit a table with a detailed description of the proposed
injection procedure that includes the following:
(A) The proposed average and maximum daily rate and quantity of injectant;
(B) The average maximum injection pressure expressed in units of pounds per square inch (psi); and
(C) The total or estimated total volume to be injected.
In -Situ Groundwater Remediation Application Rev. 8-28-2017 Page 4 of 6

5. FRACTURING PLAN (if applicable) — Per 15A NCAC 02C .0225(e)(7), submit a detailed description of the fracturing plan
that includes the following:
(A) Material Safety Data Sheets of fracturing media including information on any proppants used;
(B) a map of fracturing well locations relative to the known extent of groundwater contamination plus all buildings,
wells, septic systems, underground storage tanks, and underground utilities located within the Area of Review;
(C) a demonstration that buildings, wells, septic systems, underground storage tanks, and underground utilities will
not be adversely affected by the fracturing process;
(D) injection rate and volume;
(E) orientation of bedding planes, joints, and fracture sets of the fracture zone;
(F) performance monitoring plan for determining the fracture well radius of influence; and
(G) if conducted, the results of geophysical testing or pilot test of fracture behavior conducted in an uncontaminated
area of the site.
6. WELL CONSTRUCTION DETAILS — Per 15A NCAC 02C .0225(e)(8), submit the following information in tabular or
schematic form as appropriate for each item:
(A) number and depth of injection wells;
(B) number and depth of borings if using multi -level or "nested" well systems;
(C) indication whether the injection wells are existing or proposed;
(D) depth and type of casing;
(E) depth and type of screen material;
(F) depth and type of grout;
(G) indication whether the injection wells are permanent or temporary "direct push" points; and
(H) plans and specifications of the surface and subsurface construction details.
7. MONITORING PLAN — Per 15A NCAC 02C .0225(e)(9). submit a monitoring plan that includes the following:
(A) target contaminants plus secondary or intermediate contaminants that may result from the injection;
(B) other parameters that may serve to indicate the progress of the intended reactions;
(C) a list of existing and proposed monitoring wells to be used; and
(D) a sampling schedule to monitor the proposed injection.
Monitoring wells shall be of sufficient quantity and location to detect any movement of injection fluids, injection process byproducts,
or formation fluids outside the injection zone. The monitoring schedule shall be consistent with the proposed injection schedule, pace
of the anticipated reactions, and rate of transport of the injectants and contaminants.
8. WELL DATA TABULATION — Per 15A NCAC 02C .0225L (10), provide a tabulation of data on all existing or
abandoned wells within the area of review of the injection well(s) that penetrate the proposed injection zone, including
monitoring wells and wells proposed for use as injection wells. Such data shall include a description of each well's type,
depth, and record of construction or abandonment.
9. MAPS AND CROSS -SECTIONS — Per 15A NCAC 02C .0225(e)(11), provide scaled, site -specific site plans or maps
depicting the location, orientation, and relationship of facility components including the following:
(A) area map based on the most recent USGS 7.5' topographic map of the area, at a scale of 1:24,000 and showing the
location of the proposed injection site;
(B) topographic contour intervals showing all facility related structures, property boundaries, streams, springs, lakes,
ponds, and other surface drainage features;
(C) all existing or abandoned wells within the area of review of the wells listed in the well data tabulation that
penetrate the proposed injection zone;
(D) potentiometric surface map(s) that show the direction of groundwater movement, existing and proposed wells;
(E) contaminant plume map(s) with isoconcentration lines that show the horizontal extent of the contaminant plume
in soil and groundwater, and existing and proposed wells;
(F) cross-section(s) to the known or projected depth of contamination that show the horizontal and vertical extent of
the contaminant plume in soil and groundwater, major changes in lithology, and existing and proposed wells; and
(G) any existing sources of potential or known groundwater contamination, including waste storage, treatment, or
disposal systems within the area of review of the injection well or well system.
In -Situ Groundwater Remediation Application Rev. 8-28-2017 Page 5 of 6

X. CERTIFICATION (to be signed as required below or by that person's authorized agent*)
�._C,AC_1_5_ 0 ",v 01' � jjf,,i requires that all permit applications shall be signed as follows:
1. for a corporation: by a responsible corporate officer
2. for a partnership or sole proprietorship: by a general partner or the proprietor, respectively
3. for a municipality or a state, federal, or other public agency: by either a principal executive officer or
ranking publicly elected official
4. for all others: by the well owner.
*If an authorized agent is signing on behalf of the applicant, then supply a letter signed by the applicant
that names and authorizes their agent.
"I hereby certify tinder penalty of law that I have personally examined and am familiar with the information
submitted in this document and all attachments therein, and that, based on my inquiry of those individuals
immediately responsible for obtaining said information, I believe that the information is true, accurate, and
complete. I am aware that there are penalties, including the possibility offines and imprisonment, for submitting
false information. I agree to construct, operate, maintain, repair, and if applicable, abandon the injection well(s)
and all related appurtenances in accordance with the approved specifications and conditions of the Permit. "
Printed Name and Title:Dennis Bledsoe, Surry County Public Works Director
Sd
Datek2� 6 � �%`✓,-,; 5'
XI. CONSENT OF PROPERTY OWNER (if the property is not owned by the permit applicant)
"Owner" means any person who holds the fee or other property rights in the well being constructed. A well is real
property and its construction on land shall be deemed to vest ownership in the land owner, in the absence of
contrary agreement in writing.
"As owner of the property on which the injection well(s) are to be constructed and operated, I hereby consent to
allow the applicant to construct each injection well as outlined in this application and agree that it shall be the
responsibility of the applicant to ensure that the injection well(s) conform to the Well Construction Standards
Printed Name and Title:
Submit TWO hard copies of the completed application package with an electronic version in CD or USB Flash Drive to:
Division of Water Resources — VIC Program
1636 Mail Service Center
Raleigh, NC 27699-1636
Telephone [phone]
In -Situ Groundwater Remediation Application Rev. 8-28-2017 Page 6 of 6