NCG050374_Inspection_20200403

ROY COOPER
Governor
MICI- AEL;S.AlEOW
Secretary
BRIAN WRENN
Acting Director
NORTH CAROLINA
Environmentgt Quality
April 3, 2020
Piedmont Composites and Tooling, LLC
Attention: David Himebaugh
33 Lewittes Road
Taylorsville, North Carolina 28681
Subject: Compliance Inspection
NPD.ES Stormwater Certificate of Coverage- NCGO50374
Alexander County, North Carolina
Dear Mr. Himebaugh:
Enclosed please find a copy of the Compliance Evaluation Inspection Reports for the
inspections we conducted at the Piedmont Composites and Tooling on April 2, 2020.
The reports should be self-explanatory, however, should you have any questions
concerning these reports, please do not hesitate to contact me at james.moore@ncdenr,gov
704-235-2138 or Christopher Graybeal at [e-mail] (704) 235-
2147.
Sincerely,
Jaresoore
Assistant Regional Engineer
Land Quality Section
Enclosure
c: Stormwater Laserfiche NCGO50374
North Carolina Department of Environmental Quality I Division of Energy, Mineral and Land Resources
Mooresville RegionalOffice 1 610 East Center Avenue, Suite 3011 Mooresville, North Carolina 28115
eaarriC4ROtJNa
c� as mOU" 7ndOWAua4

Compliance Inspection Report
Permit: NCG050374 Effective: 06/01/18 Expiration: 05/31/23 Owner: Piedmont Composites and Tooling LLC
SOC: Effective: Expiration: Facility: Piedmont Composites and Tooling, LLC
County: Alexander 33 Lewittes Rd
Region: Mooresville
Taylorsville NC 28681
Contact Person: David Himebaugh Title: Phone: [phone]
Directions to Facility:
System Classifications:
Primary ORC:
Secondary ORC(s):
On -Site Representative(s):
Related Permits:
Inspection Date: 04/02/2020 Entry Time 01:30PM
Primary Inspector: Christopher Graybeal
Secondary Inspector(s):
Certification: Phone:
Exit Time: 02:30PM
Phone: [phone]
Reason for Inspection: Routine Inspection Type: Compliance Evaluation
Permit Inspection Type: Apparel/Printing/Paper/Leather/Rubber Stormwater Discharge COC
Facility Status: 0 Compliant Not Compliant
Question Areas:
Other
(See attachment summary)
Page 1 of 3

Permit: NCG050374 Owner - Facility: Piedmont Composites and Tooling LLC
Inspection Date: 04/02/2020 Inspection Type : Compliance Evaluation Reason for Visit: Routine
Other
Yes No NA NE
Comment:
Page 3 of 3