SW8970515_Current Permit_19991001

TO: NC DENR/Division of Environmental Management
Water Quality Section
127 Cardinal Drive Extension.
Wilmington, NC 28405-3845
RE: Sunset Oaks Condominiums
Permit No. SW8 970515
Dated: September 23, 1997
Brunswick County
A&K Project No. 96296
Engineer's Certification
State Stormwater Management Systems
Permit No SW8 970515
_T
0 C T 11.T t9.Qg
BY:
I, J. Phillip Norris, P. E. , as a duly registered Professional Engineer in the State of
North Carolina, having been authorized to observe (periodically, i.m .W, full f:d...e) the construction of the project,
Sunset Oaks Condominiums
(Project)
for Sunset Oaks, LLC (Project Owner) hereby state that, to the best of my abilities, due
carc and diligence were used in the observation of the project construction such that the construction was observed
to be built within substantial compliance and intent of the approved plans and specifications.
Required Items to be checked for this certification to be considered complete are on page 2 of this form.
Noted deviations from approved plans and specifications:
Signature
xegistrat n 11966 -1161arnr804
Date September 30, 1999 `��y�
S EAL
cc: Mr. William 'Taylor/Sunset Oaks, LLC = I.I 966
Building Inspector
JPN/tsm ;may �`',
%2%-30 '
pp��PHILLIP �
o� CONSULTING ENGINEERS, INC.
—_ = 902 Market Street Wilmington, NC 28401-4733

PE Certification requirements:
The drainage area to the system contains approximately the permitted acreage.
The drainage area to the system contains no more than the permitted amount of built -
upon area.
All the built -upon area associated with the project is graded such that the runoff
drains to the system.
The outlet/bypass structure elevations are per the approved plan.
The outlet structure is located per the approved plans.
Trash rack is provided on the outlet/bypass structure.
All slopes are grassed with permanent vegetation.
Vegetated slopes are no steeper than 3:1.
The inlets are located per the approved plans and do not cause short-circuiting of the
system.
). The permitted amounts of surface area and/or volume have been provided.
11. required drawdown devices are correctly sized per the approved plans.
12. All required design depths are provided.
13. All required parts of the system are provided, such as vegetated shelf, and a
forebay.
14. The overall dimensions of the system, as shown on the approved plans, are provided.
S:\WQS\STORMWAT\FORMS\PECERT.FOR
cc: Building Inspector
2