NCGNE0332_COMPLETE FILE - HISTORICAL_20180905

�U)
STORMWATER DIVISION CODING SHEET
NCG PERMITS
PERMIT NO.
NCGNE 933o)
DOC TYPE
Dc HISTORICAL FILE
DOC DATE
Lgrj
YYYYMMOD

ROY COOPER
Governor
MICHAEL S. REGAN
Secretary
WILLIAM E. (TOBY) VINSON, JR.
Interim Director
Atlas Precision Inc
Attention: Joel Schaub
170 Clayton Road
Arden, North Carolina 28704
0
ma- � .
NORTH CAROLINA
Environmental Quality 16,4j(„5 Qf f'G15Ion iA .
KX-E:1 ar 0332
September 5, 2018
Subject: Compliance Evaluation Inspection
Certificate: NCGNE0332
Buncombe, North Carolina
Dear Mr. Schaub:
^GorhbQ
Enclosed please find a copy of the Compliance Evaluation Inspection Report for the
inspection I conducted at the subject facility on August 15, 2018.
The report should be self-explanatory; however, should you have any questions
concerning this report, please do not hesitate to contact me at [phone] or by email
at [e-mail].
Sin ely,
Isaiah Reed, CEPS Cl, MS CECI
Environmental Speciali t
Land Quality Section
Enclosure: Inspection Report
North Carolina Department of Environmental Quality I Division of Energy, Mineral and Land Resources
Asheville Reglonal Office 1 2090 U.S. Highway70 1 Swan nanoa, North Carolina 28778
828.296.4500

i
Permit: NCGNE0332
SOC:
County: Buncombe
Region: Asheville
Compliance Inspection Report
Effective: 05/29/07 Expiration:
Effective: Expiration:
Contact Person: Johann W Hofschuster Title:
Directions to Facility:
System Classifications:
Primary ORC:
Secondary ORC(s):
On -Site Representatives):
Related Permits:
Inspection Date: 08/15/2018 EntryTime: 11:30AM
Primary Inspector: Isaiah L Reed
Secondary Inspector(s):
Certification:
Owner : Atlas Precision Inc
Facility: Atlas Precision
170 Clayton Rd
Arden NC 28704
Phone: [phone]
Phone:
Exit Time: 12:30PM
Phone: [phone]
Reason for Inspection: Routine inspection Type: Compliance Evaluation
Permit inspection Type: Stormwater Discharge, No Exposure Certificate
Facility Status: [] Compliant ® Not Compliant
Question Areas:
® Miscellaneous Questions on Misc
(See attachment summary)
Page: 1

C
0
perMit; NCGNE0332 Owner - Facility: Atlas Precision Ino
Inspection Date: 0811512018 Inspection Type : Compliance Evaluation Reason for Visit: Routine
Inspection Summary:
On August 15, 2018 this facility was inspected for compliance. I met with Joel Schaub on site. The inspection was done in
response to a rescission request submitted for the previous permit that covered the facility. During the inspection, it was
observed that an area on the rear side of the facility is currently used to store used pallets. No Exposure status cannot be
maintained with this material outside. Mr. Schaub has since communicated to the office that this area will be addressed and
a future inspection will be conducted to confirm compliance with the No Exposure certification.
Page: 2

-1
Mlsc
Permit: NCGNE0332 Owner- Facility: Atlas Precision Inc
Inspection pate: 08/15/2018 Inspection Type : Compliance Evaluation Reason for Visit: Routine
Yes No NA NE
Is the facility compliant? ❑ ®❑ On
Comment: The area in the rear of the facility is used for storing used pallets for an extended period of time.
Page: 3

Compliance Inspection Report
Permit: NCGNE0332 Effective: 05129/07 Expiration
SOC: Effective: Expiration
County: Buncombe
Region: Asheville
Contact Person: Johann vV Hofschuster Title:
Directions to Facility:
System Classifications:
Primary ORC:
Secondary ORC(s):
On -Site Representative(s):
Related Permits:
Inspection Date: 08/15/2018
Primary Inspector: Isaiah I_ Reed
Secondary Inspector(s):
Certification:
Owner : Atlas Precision Inc
Facility: Atlas Precision
170 Clayton Rd
Arden NC 28704
Phone: [phone]
Phone:
Entry Time: 11:30AM Exit Time: 12:30PM
Phone: [phone]
Reason for Inspection: Routine Inspection Type: Compliance Evaluation
Permit Inspection Type: Stormwater Discharge, No Exposure Certificate
Facility Status: ❑ Compliant ® Not Compliant
Question Areas:
® Miscellaneous Questions ® Misc
(See attachment summary)
Page: 1

•
permit NCGNF-0332 Owner - Facility: Atlas Precision Inc
Inspection Dale: 09h51201 B Inspection Type : compliance Evaluation Reason for Visit: Routine
Inspection Summary:
On August 15, 2018 this facility was inspected for compliance. I met with Joel Schaub on site. The inspection was done in
response to a rescission request submitted for the previous permit that covered the facility. During the inspection, it was
observed that an area on the rear side of the facility is currently used to store used pallets. No Exposure status cannot be
maintained with this material outside. Mr. Schaub has since communicated to the office that this area will be addressed and
a future inspection will be conducted to confirm compliance with the No Exposure certification.
Page: 2

Permit: NCGNE0332 Owner- Facility: Atlas Precision Inc
Inspection (late: 08/15/2018 Inspection Type : Compliance Evaluation Reason for Visit: Routine
Misc Yes No NA NE
Is the facility compliant? ❑ ®❑ ❑
Comment: The area in the rear of the facility is used for storing used pallets for an extended period of time.
Page: 3

�(C \N A7'F
Michael F. Easley, Governor
T p
William G. Ross Jr., Secretary
North Carolina Department of Environment and Natural Resources
co
7
Alan W. Klimek, P. E. Director
Division of Water Quality
0
Coleen H. Sullins, Deputy Director
Division of Water Quality
May 29, 2007
Mr. Johann W, Hofschuster
Atlas Precision
170 Clayton Road
Arden, NC 28704
Subject: No Exposure Certification NCGNE0332
Atlas Precision
170 Clayton Road, Arden, INC
Buncombe County
Dear Mr. »ofschuster:
The Division has reviewed your submittal of the No -Exposure Certification for Exclusion from NPDES
Stormwater Permitting form, which we received on January 26, 2007. Based on your submittal and signed
certification of no exposure at the above referenced facility, the Division is granting your certification as
provided for under 40 CFR 126,22(g), which is incorporated by reference in North Carolina regulations.
Please note that by our acceptance of your no exposure certification, you are obligated to maintain no
exposure conditions at your facility. If conditions change such that your facility can no longer qualify for a no -
exposure exclusion, you are obligated to immediately obtain NPDES permit coverage for your stormwater
discharge. Otherwise, the discharge becomes subject to enforcement as an un-permitted discharge. Your
conditional no -exposure exclusion expires in five years (May 31, 2012). At that time you must re -certify with
the Division, or obtain NPDES permit coverage for any stormwater discharges from your facility.
Your certification of no exposure does not affect your facility's legal requirements to obtain environmental
permits that may be required under other federal, state, or local regulations or ordinances.
If you have any questions or need further information, please contact Sarah Young at [phone], ext.
502, or at [e-mail].
cc: Asheville Regional Office
Stormwater Permitting Unit Files
Sincerely,
/J P,4,�
for Alan W. Klimek, P.E.
Central Files — wlattachments,
N. C. Division of Water Quality 1617 Mail Service Center Raleigh, North Carolina 27699-1617 [phone]
06 R
Customer Service
1-877-623-6748

1--✓
r `
NCGn�Eo33a ��D
United States Environmental Protection Agency
NPDES w _ _Washington, DC_20460 -. . . . .
FORM ®`�� EPA
NO EXPOSURE CERTIFICATION for Exclusion i
3510-11
. NPDES Storm Water Permitting
Submission of this No Exposure Certification constitutes notice that the entity identified in Section A does not requirepr
discharges associated with industrial activity in the State identified in Section B under EPA's Storm Water Multi -Sector
of a condition of no exposure.
Form Approved
N
.. t .
DE"C-J4- 8 2006
InMn fOr s storm water
'ermit due to the existence
A condition of no exposure exists at an industrial facility when all industrial materials and activities are protected by a storm resistant shelter to prevent
exposure to rain, snow. snowmelt, andloi= runoff. industriai materials or activities include, but are not limited to, material handling equipment or activities,
industrial machinery, raw materials, intermediate products, by-products, final products, or waste products. Material handling activities include the storage,
loading and unloading, transportation, or conveyance of any raw material, intermediate product, final product or waste product, A storm resistant shelter is
not required for the following industrial materials and activities:
drums, barrels, tanks, and similar containers that are tightly sealed, provided those containers are not deteriorated and do not leak. "Sealed"
means banded or otherwise secured and without operational taps or valves;
- adequately maintained vehicles used in material handling; and
- final products, other than products that would be mobilized in storm water discharges (e.g., rock salt).
A No Exposure Certification must be provided for each facility qualifying for the no exposure exclusion. In addition, the exclusion from NPDES permitting is
available an a facility-wido basis only, not for individual outtalls. If any industrial activities or materials are or will be exposed to precipitation, the facility is
not eligible for the no exposure exclusion,
By signing and submitting this No Exposure Certification form, the entity in Section,A is certifying that a condition of no exposure exists at its facility or site,
and is obligated to comply with the terms and conditions of 40 CFR 122.26(g).
ALL INFORMATION MUST 9E PROVIDED'ON THIS FORM. "
Detailed Instructions for completing this fern) and obtaining the no exposure excluslon are provlded on pages 3 andA.
A. Facility Operator Information
1. Name'. RI1."1 CI f I ��Sl )I I rt 14 1 1 11 I I 1 4 1 1. 1 I' `' 1 1- 12. Phone'' I � 11 �I Ci Ri 21�f'1 qIo 101
3. Mailing Address: a. Street: iloi L1A1y[ i fI i I I I I I I 14 I t l l I 11 1
b. Ory 1 9 mL_6 A(I I—LJ I I I I 11 . c. State: , /V d. Zip Ccde: i S171 E) q - I
B. FacilityfSite Locations Information�] r
1. Facility Name:
A t k 4 A S I r 1 9 El CA .f I JI 1� f 1 I I I L I' t L I I I I I I I f
2. a. Street Addiesss:: �I I I I IUI IL.ILJ�l II DIN 111 U j I I 1 1 1 1- I I I I I I l i II__i
b. City: it`l r q j-:p1 .I I 11 I I I I I I I I I I I I I I c. County: �I UINI L
d. State: I^/Z e. Zip Code: 1,9 j- I y -I I I I I
3. Is the facility located on Indian Lands? Yes No EK
4. Is this a Federal facility? Yes No IN
5. a. Latitude: �� �� �LJ " b. Longitude: I I I i Lj �� �jJ " C_
a D
6. a. Was the facility or site previously covered under an NPDES storm water permit? Yes No ❑ 98
b. If yes, enter NPDES permit number: NCG-I 5 OUQ D It
7. SICIActivity Codes: Primary: 30&9 Secondary (if applicable): I I I I I � � ry
S. Total size of site associated with industrial activity: acres av
9. a. Have you paved or roofed over a formerly exposed, pervious area in order to qualify for the no exposure exclusion? Yes No
b. If yes, please indicate approximately how much area was paved or roofed over. Completing this question does not disqualify you for the no exposure
exclusion. However. your permitting authority may use this information in considering whether storm water discharges from your site are likely to have
an adverse impact on water quality, in which case you could be required to obtain permit coverage.
Less than one acre LJ One to five acres ❑ More than five acres 11
EPA Fenn 3.510-11 (10-139)
Page 1 of 4

�IA10j,
}
r
•.. ,sr.-
tii yr ,'i', .. n ., I.
'.7 ., '

NPDES „ NO EXPOSURE CERTIFICATION for Exclusion from Form Approved
FORM
..EPA OMB No.2040-0211
3510-11 NPDES Storm Water Permitting
C. Exposure Checklist
Are any of the following materials or activities exposed to precipitation, now or in the foreseeable future?
(Please check either "Yes" or "No" in the appropriate box.) If you answer "Yes" to any of these questions
(1) through (11), you are not ellgible for the no exposure exclusion.
Yes
No
1.
Using, storing or cleaning industrial machinery or equipment, and areas where residuals from using, storing
❑
or cleaniny industrial machinery or equipment remain and are exposed to storm water
2.
Materials or residuals on the ground or in storm water inlets from spills/leaks
❑
3.
Materials or products from past industrial activity
❑
4.
Material handling equipment (except adequately maintained vehicles)
❑
X
5.
Materials or products during loadinglunloading or transporting activities
❑
S.
Materials or producis stored auidooi s (except final producis intended for outside use [e.g., new cars) where
07
exposure to storm water does not result in the discharge of pollutants)
7.
Materials contained in open, deteriorated or leaking storage drums, barrels, tanks, and similar containers
❑
[IN
8
Materials or products handled/stored on roads or railways owned or maintained by the discharger
❑
Q
9.
Waste material (except waste in covered, non -leaking containers [e.g., dumpsters])
❑
10.
Application or disposal of process wastewater (unless otherwise permitted)
❑
11,
Particulate matter or visible deposits of residuals from roof stacks and/or vents not otherwise regulated
❑
(i.e.. under an air quality control permit) and evident in the storm water outflow
D. Certification Statement
I cortify under penalty of law that I have read and understand the eligibility requirements for claiming a condition of "no exposure" and obtaining an
exclusion from NPDES storm water permitting.
I certify under penalty of law that there are no discharges of storm water contaminated by exposure to industrial activities or materials from the industrial
facility or site idnnfified in this document (except as allowed under 40 CFR 122.26(g)(2)).
I understand that t am obligated to submit a no exposure certification form once every five years to the NPDES permitting authority and, if requested, to
the operator of the local municipal separate storm sewer system (MS4) into which the facility discharges (where applicable). I understand that I must
allow the NPDES permitting authority, or MS4 operator where the discharge is into the local MS4, to perform inspections to confirm the condition of no
exposure and to make such inspection reports publicly available upon request. I understand that I must obtain coverage under an NPDES permit prior
to any ,point Source discharge of storm water from the facility.
Additionally, I certify under penalty of law that this document and all attachments were prepared under my direction or supervision in accordance with a
System designed to assure that qualified personnel properly gathered and evaluated the information submitted. Based on my inquiry of the person or
persons who manana the system. or those persons directly responsible for gathering the information. the information submitted is to the hest of my
knowledge and belief true, accurate and complete. I am aware that there are significant penalties for submitting false information, including the possibility
of fine and imprisonment for knowing violations, L / r� p ,^� n
Print Name: 0-j 9AYI!_ii .( [YM I R(2 f ISI C.-}V1 UI -51 Ilk
�-i W I} I I I I I I I I
Print Title:
Signature:
Date:
EPA Form 3510-1 1 (10-99)
Page 2 of 4

Re: No Exposures -Asheville
Subject: Re: No Exposures -Asheville
From: Starr Silvis <[e-mail]>
Date: Wed, 14 Mar 2007 16:23:07 -0400
To: Sarah Young <sarah.young@ncmai 1. net>
CC: Laurie Moorhead <[e-mail]>, Roger Edwards <Roger,Edward [e-mail]>
332 and 333 are fine/ 1've been to both facilities and they really don't have any exposure. Laurie will
know about Blue Ridge Metal Recycling. I will check with Larry and Keith about TWSA. Thanks for
the info!
Sarah Young wrote:
Here's the next round of no -exposures for your region. Please let me know within 30 days if I can
issues these. Thanks, Sarah
Starr Silvis - [e-mail]
North Carolina Dept. of Environment and Natural Resources
Asheville Regional Office
Division of Water Quality - Surface Water Protection Section
2090 U.S. 70 Highway
Swannanoa, NC 28778
Tel: [phone]
Fax: [phone]
Starr Silvis <Starr.Silvis u,ncmail.net>
Environmental Engineer
NC DENR - Asheville Regional Office
Division of Water Quality - Surface Water Protection Section
Lq 5/18/200712:21 PM