NCGNE0204_Inspection Report_20200128

ROY COOPER
Governor
MICHAEL S. REGAN
Secretary
S. DANIEL SMITH
Director
Underwood Weld Co., Inc.
Attention: Marc Horney
Post Office Box 669
Spruce Pine, North Carolina 28777
NORTH CAROLINA
Environmental Quality
January 28, 2020
Subject: No Exposure Certification
Compliance Evaluation Inspection
Underwood & Weld Co., Inc.
Certification Number: NCGNE0204
Mitchell County, North Carolina
Dear Mr. Horney:
Enclosed please find a copy of the Compliance Evaluation Inspection Report for the
inspection I conducted at the subject facility on January 22, 2020.
The report should be self-explanatory; however, should you have any questions
concerning this report, please do not hesitate to contact me at [phone] or by email
at [e-mail].
Sind
saiah Reed, C WQ, CEPSCI MS4CECI
Environmental Specialist
Land Quality Section
Enclosure: Inspection Report
D_EQ�� North Carolina Department of Environmental Quality I Division of Energy, Mineral and Land Resources
Asheville Regional Office 1 2090 U.S. Highway 70 1 Swannanoa, North Carolina 28778
NOPlNOPPCIIN,I
828.296.4500

Compliance Inspection Report
Permit: NCGNE0204 Effective: 05/01/05 Expiration: Owner: Underwood Weld Cc Inc
SOC: Effective: Expiration: Facility: Underwood & Weld Co Incorporated
County: Mitchell 8019 Hwy 19e N
Region: Asheville
Spruce Pine NC 28777
Contact Person: Badger Underwood Title: Phone: [phone]
Directions to Facility
System Classifications:
Primary ORC:
Secondary ORC(s):
On -Site Representative(s):
Related Permits:
Inspection Date: 01/22/2020
Primary Inspector: Isaiah L Reed
Secondary Inspector(s):
Certification:
Phone:
EntryTime: 11:OOAM Exit Time: 11:30AM
Phone: [phone]
Reason for Inspection: Routine Inspection Type: Compliance Evaluation
Permit Inspection Type: Stormwater Discharge, No Exposure Certificate
Facility Status: Compliant Not Compliant
Question Areas:
Miscellaneous Questions Misc
(See attachment summary)
Page 1 of 3

Permit: NCGNE0204 Owner -Facility: Undenvood Weld Cc Inc
Inspection Date: 01/2212020 Inspection Type : Compliance Evaluation Reason for Visit: Routine
Inspection Summary:
On January 22, 2020 this facility was inspected for compliance. I met with Marc Homey on site. All issues noted in the
previous inspection have been addressed and no major issues were observed.
If you have any questions, please contact this office at [phone]
Page 2 of 3

Permit: NCGNE0204
Inspection Date: 01/22/2020
Misc
Is the facility compliant?
Comment:
Owner - Facility: Underwood Weld Cc Inc
Inspection Type : Compliance Evaluation Reason for Visit: Routine
Yes No NA NE
■❑❑❑
Page 3 of 3