NCG200516_COMPLETE FILE - HISTORICAL_20170410

STORMWATER DIVISION CODING SHEET
NCG PERMITS
PERMIT NO.
/vtoo
DOC TYPE
HISTORICAL FILE
❑ MONITORING REPORTS
DOC DATE
-)-OL'I 1O
YYYYMMDD

Energy, Mineral
and Land Resources
ENVIR9NMENTA_ QUAL17Y
April 10, 2017
IMET Alloys
Attention: Mr. Mike Oruska
3000 Stitt Street, Suite 150
Monroe, North Carolina 28110
ROY COOPER
Governor
MICHAEL S. REGAN
Secretary
TRACY E. DAVIS
Director
Subject: NPDES Stormwater Permit
Stormwater Permit Certificate of Coverage No. NCG200516
Representative Outfall Status Request
Union County
Dear Mr. Oruska:
We are in receipt of your letter received in our office on March 22, 2017 regarding a representative outfall for
the Baldor Electric Company facility located at 3000 Stitt Street in Monroe, North Carolina. The proposed
representative outfall 001 would be representative of outfalls 1 and 2.
The Mooresville Regional Office staff inspected the subject facility on April 4, 2017 and met with you on site.
During the site visit we discussed the drainage areas and their respective activities on site, a previously unidentified
outfall, and the lack of analytical monitoring data to support the justification of representative outfall status.
Based on the information provided and the site visit on April 4, 2017 we are declining the request for
representative outfall status for the IMET Alloys facility located at 3000 Stitt Street, Suite 150, Monroe, North Carolina.
!n light of the above, it was agreed that IMET Alloys must update the site map and sampling plan to include all outfalls
on site. Once all outfalls are accurately identified and monitored, please supply the documented data from analytical
monitoring to suggest that representative outfall status would supply a comprehensive data of all activities on site.
If you have any questions or need further information, please contact Ms. Holliday Keen
([e-mail]) or me at [phone].
Sincerely,
54" S_ 4(,
Zahid S. Khan, CPM, CPESC, CPSWQ
Regional Engineer
Land Quality Section
cc: -Stormwater-Perm itting.P..rogram
State or North Car���704
I Quality I Energy, Mineral and Land Resources
Mooresville Regit Center Ave Ste 301 I Mooresville, NC 28115
663 109 T

Compliance Insnection Report
Permit: NCG200516 Effective: 02122M7 Expiration: 05/31/19 Owner; ImetAlloys
SOC: Effective: Expiration: Facility: IMET Alloys
County: Union 3000 Stitt St
Ste 150
Region: Mooresville
Monroe NC 28110
Contact Person: Mike Oruska Title: Phone: [phone]
Directions to Facility:
the facility is located on the south side of Stitt Street at the junction of Stitt St and Spud Smith St in east Monroe, NC.
System Classifications:
Primary ORC: Certification: Phone:
Secondary ORC(s):
On -Site Representative(s):
Related Permits:
Inspection Date: 0410412017 Entry Time: 02:OOPM Exit Time: 03:30PM
Primary Inspector: Holliday Keen Phone:
Secondary Inspector(s):
Reason for Inspection: Routine Inspection Type: Technical Assistance
Permit Inspection Type: Wholesale Trade of Metal Waste and Scrap Stormwater Discharge COC
Facility Status: Compliant ❑ Not Compliant
Question Areas:
Storm Water
(See attachment summary)
Page: 1

permit.• NCG200516 Owner - Facility: Imet Alloys
Inspection Date: 04104/2017 Inspection Type: Technical Assistance Reason for Visit: Routine
Inspection Summary:
This inspection was conducted to assess the viability of representative outfall status for this site. The request was for the
sample location at Outfall #1 to represent the entire site. During my inspection I found that Outfall #1 and Outfall #2
represent drainage areas with different uses and activities, therefore Outfall #1 would not be a representative sample of the
entire site. During this inspection I also found that there an inlet within the paved area near the building that leads to an
additional outfall that was not previously known. The site map and sampling plan must be modified to include this outfall as
Outfall #3.
If you have any questions, please contact our office at 704-663-1699 or by email at [e-mail].
Page: 2

Energy, Mineral
and Lund Resources
ENVIRONMENTAL OVALITY
February 22, 2017
Mr. Mike Oruska
IMET Alloys
3000 Stitt St, Suite 150
Monroe, NC 28110
ROY COOPER
Governor
MICHAEL S. REGAN
Se crelar-
TRACY DAVIS
Uirecmr
Subject: General Permit No. NCG200000
IMET Alloys
COC No. NCG200516
Union County
Dear Mr. Oruska:
In accordance with your application for a discharge permit received on December 22, 2016, we are
forwarding herewith the subject certificate of coverage (COC) to discharge under the subject state —
NPDES general permit, This permit is issued pursuant to the requirements of North Carolina General
Statute 143-215.1 and the Memorandum of Agreement between North Carolina and the US
Environmental Protection Agency dated October 15, 2007 (or as subsequently amended).
Please take notice that this certificate of coverage is not transferable except upon approval of the
Division of Energy, Mineral and Land Resources. The Division of Energy, Mineral and Land
Resources may require modification or revocation and reissuance of the certificate of coverage.
This permit does not affect the legal requirements to obtain other permits which may be required by
the Division of Energy, Mineral and Land Resources, the Coastal Area Management Act, or any other
federal or local government permit that may be required.
If you have any questions concerning this permit, please contact Julie Ventaloro at telephone number
[phone] or by email julie.ventaloro ncdenr._gov.
Sincerely,
for Tracy E. Davis, P.E., CPM, Director
Division of Energy, Mineral and Land Resources
cc: Mooresville Regional Office, Zahid Khan
Central Files
Stormwater 11'ennitting Program Files
Statc of North Carolina I Environmental Quality I F,nergy, Mineral and Land Resources
1612 Mail Service Center 1 512 Norih Salisbury Street a Raleigh, NC 27699-1612
919 707 9200 T

Ventaloro, .Julie
From: Khan, Zahid
Sent: Friday, February 17, 2017 4:25 PM
To: Ventaloro, Julie
Subject: FW: NCG200516_IMET Ailoys_NOI Inspection
Attachments: NCG200516_IME:T ALLOYS_NOI INSP 2-15-17.pdf
Follow Up Flag: Follow up
Flag Status: Flagged
No objection from MRO. Thanks
From: Keen, Holliday V
Sent: Friday, February 17, 2017 1:26 PM
To: Khan, Zahid <[e-mail]>
Subject: NCG200516_IMETAIIoys_NOI Inspection
As stated in the report: This inspection was conducted to verify site conditions correspond with the Notice of Intent
submitted by IMET Alloys. Upon inspection, I found that the Notice of Intent is accurate and I recommend that IMET
Alloys be granted coverage under general permit NCG200000.
Let me know if you need any more information.
Holliday Keen
Environmental Senior Specialist
Land Quality Section, Mooresville Regional Office
Division of Energy, Mineral and Land Resources
North Carolina Department of Environmental Quality
Phone: [phone]
Email: Holliday. Keen@NCDENR,gov

Horizon Engineering & Consulting, Inc.
2510 Walker Road
Mt. Pleasant, N.C. 28124-8567
704-788-4455
Fax: [phone]
December 9, 2016
Stormwater Permitting Unit
Division of Energy, Mineral and Land Resources
1612 Mail Service Center
Raleigh, N.C. 27699 - 1612
Subject: Stormwater NPDES Permit Notice of intent
IMET Alloys
Monroe, NC
Union County
Gentlemen:
Attached are three (3) copies of the NOI and supporting documents, which are our request for
coverage under General NPDES permit NCG200000. We -have enclosed and a check for $ 100
(application fee.)
This is an existing facility that has not previously held a stormwater permit. In the course of
reviewing the facilities operations, it was determined that there are exposed materials'and
operations that necessitate our application for coverage under the general discharge permit for
our industry.
The primary industrial activity at this facility is the recycling/redistribution of alloy metals (i.e.
titanium alloys, nickel alloys, stainless steel alloys, etc.) The facility currently receives scrap
metal materials ( cuttings, turnings, grindings, etc.) which they clean, size, package, etc. for
outside sales to steel manufacturers for use as ingredients in producing steel alloys.
We appreciate your consideration of our application. If you have any questions or if there is
anything we need to discuss, please call me (704-788-4455) or the facility contact, Mr. Mike
Oruska (704-225-9932.)
C: Mike Oruska

.Y
�T ' Division of Energy, Mineral, and Land Resources
I Land Quality Section
NCDENR National Pollutant Discharge Elimination System
��t
�� �
�wva � NCG200000
I Date Remived I
NOTICE OF INTENT
National Pollutant Discharge Elimination System application for coverage under General Permit
NCG200000 for STORMWATER DISCHARGES associated with activities classified as:
SIC 5093 Scrap Metal Recycling (except as specified below)
And, Like activities deemed by DEMLR to be similar in the process, or the exposure of raw
materials, intermediate products, final products, by-products, or waste materials.
The following activities are excluded from coverage under this General Permit:
Automobile Wrecking for Scrap (a portion of SIC 5093)
Non -Metal Scrap Recycling (a portion of SIC 5093)
+ Used Motor Vehicle Parts (SIC 5015)
(Please print or type), -
1) Mailing address of the ownerloperator (address to which official permit correspondence will be mailed):
Name IMET Alloys
Owner Contact Mike_Oruska. Chief Operations Officer
Street Address 3000 Stitt Street, Suite 150
City Monroe State NC ZIP Code 28110
Telephone No. 704-225-9932 Fax: [phone]
E-mail Address moruska(cD_imetalloys.com
2) Location of the facility producing the discharge:
Facility Name WET Alloys
Owner Contact Mike Oruska, Chief Operations Officer
Street Address 3000 Stitt Street, Suite 150
City Monroe State NC ZIP Code 28110
County Union
Telephone No. 704-225-9932 Fax: [phone]
E-mail Address moruska(ccD-imetalloys.com
3) Physical Location Information:
Please provide a description of how to get to the facility (use street names, state road numbers, and distance
and direction from a roadway intersection). The facility is located on the south side of Stitt Street at the
function of Stitt Steet and Spud Smith Street in east Monroe, NC
(A copy of a county map or USGS quad Sheet with facility clearly located on the map is a required part of this application.)
4) Latitude 34 deg 59 min. 07 sec... Longitude _ 80 deg. 29 min. 40 sec. (degrees, minutes, seconds)
5) This NPDES Permit Application applies to which -of the following :
❑ New or Proposed Facility* Date operation is to begin Existing
x Existing
*If this new or proposed facility is located in one of the 20 coastal counties, please contact the appropriate DEMLR Regional
Office (see page 4) to determine if a State Stormwater Permit is required prior to construction.
Page 1 of 4
SWU-235-012815 Last revised 1128/15

r46
NCG200000 N.O.I.
wl-
6) Standard Industrial Classification:
Provide the 4 digit Standard Industrial Classification Code (SIC Code) that describes the primary industrial
activity at this facility
SIC Code: 5 0 9 3
7) Services and Activities
a) Provide a brief description of the types of industrial activities and products manufactured at this
facility: (Include a site diagram of the process areas and location of activities present at this facility.)
The facility receives scram metal alloys (grindings, turnings, cuttings, etc.) that undego Processing_ indoors for
cleaning, sizing, storing and packaging the materials for distribution -to steel mills and similar industEy for
melting and casting into alloy products.
b) Check all activities conducted at this facility.
( X Outdoor stockpiling of materials
( X Processing — cutting, grinding,
crushing, baling, separation, etc.
{ Storage of materials in above-
ground tanks
( X Material loading and unloading
8) Discharge points 1 Receiving waters:
( Transport of materials by a conveyor
or front-end loader
( Vehicle and equipment maintenance
( Vehicle or equipment washing
- ( X Vehicle and equipment fueling
How many discharge points (ditches, pipes, channels, curb and gutter, swales, etc.) convey stormwater from
the property? Two 2
What is the name of the body or bodies of water (creek, stream, river, lake, etc.) that the facility stormwater
discharges end up in? Joes Branch tributary to Richardson Creek)
If the site stormwater discharges to a separate storm sewer system, name the operator of the separate storm
sewer system (e.g. City of Raleigh municipal storm sewer). Nat apmlicable
Receiving water classification (if known):
9) Does this facility:
a) Have an untreated wastewater discharge? X No ❑ Yes
b) Have a treated wastewater discharge? X No ❑ Yes
If yes, list the permit number.
c) Have a wastewater discharge from a recycle system? X No ❑ Yes
If yes, list the permit number.
d) Have a non -discharge permit? X No ❑ Yes
If yes, list the permit number.
e) Discharge wastewater to a municipal wastewater collection system? X No Yes
If yes, list the municipality and permit number
Note: Stormwater discharge permit NCG200000 does not authorize the discharge of any wastewater.
If this site discharges wastewater, you must obtain the appropriate wastewater discharge
permit in addition to coverage for stormwater discharges under NCG200000.
10) Does this facility employ any best management practices for stormwater control?
❑ No X Yes (Show any structural BMP's on the site diagram.)
If yes, please briefly describe: Most materials and operations are confined to indoors. Materials equipment
and activities outdoors are kept to a minimum. Good housekeeping measures are employed_
Page 2 of 4
SWU-235-012815 Last revised 01/28/15

(i
NCG200000 N.O.I.
11) Does this facility have a Stormwater Pollution Prevention Plan?
X No ❑ Yes
if yes, when was it implemented?
12) Are vehicle/equipment maintenance activities occurring at this facility?
X No Yes
13) Hazardous Waste:
a) Is this facility a Hazardous Waste Treatment, Storage, or Disposal Facility?
X No ❑ Yes
b) Is this facility a Small Quantity Generator (less than 1000 kg. of hazardous waste generated per month) of
hazardous waste?
X No ❑ Yes
c) Is this facility a Large Quantity Generator (1000 kg. or more of hazardous waste generated per month) of
hazardous waste?
X No ❑ Yes
d) Is hazardous waste stored in the 100-year flood plain?
X No ❑ Yes If yes, include information to demonstrate prgtection from flooding.
e) If you answered yes to questions b. or c., please provide the following information:
Type(s) of waste:
How is material stored:
Where is material stored:
How many disposal shipments per year:
Name of transport 1 disposal vendor:
Vendor address:
14) Certification:
North Carolina General Statute 143-215.6B ([) provides that:
Any person who knowingly makes any false statement, representation, or certification in any application, record, report, plan, or other
document filed or required to be maintained under this Article or a rule implementing this Article; or who knowingly makes a false
statement of a material fact in a rulemaking proceeding or contested case under this Article; or who falsifies, tampers with, or knowingly
renders inaccurate any recording or monitoring device or method required to be operated or maintained under this Article or rules of the
[Environmental Management] Commission implementing this Article shall be guilty of a Class 2 misdemeanor which may include a fine
not to exceed ten thousand dollars ($10,000).
I hereby request coverage under the referenced General Permit. I understand that coverage under this permit
will constitute the permit requirements for the discharge(s) and is enforceable in the same manner as an
individual permit. I certify that I am familiar with the information contained in this application and that to the
best of my knowledge and belief such information is true, complete, and accurate.
Printed Name of Person
Title: Chief Qverat
of Applicant)
ning: Mike Oruska
r -Q ?° (,: � -
(Date Signed)
This Notice of Intent must be accompanied by a check or money order for 100.00 made payable to:
NCDENR
Page 3 of 4
SWU-235-012815 Last revised 01/28/15

.r�
NCG200000 N.O.I.
Final Checklist
This application will be returned as incomplete unless all of the following items have been included.
Please do not ask us to "hold" an incomplete application in anticipation of a check under separate cover.
X Check for $100 made payable to NCDENR
X This completed application signed by the applicant along with all supporting documents
X A site diagram showing, at a minimum, (existing or proposed):
(a) outline of drainage areas, (b) stormwater management structures, (c) location of stormwater outfalls
(corresponding to which drainage areas), (d) runoff conveyance structures, (e) areas where materials are
stored, (f) impervious areas, (g) site property lines, (h) vehicle and equipment maintenance, blasting,
painting, and washing areas, and (i) location of activities listed in 7b.
X Copy of county map or USGS quad sheet (preferred) with location of facility clearly marked on map
Please mail the entire package to:
Stormwater Permitting Program ,
Division of Energy, Mineral, and Land Resources
1612 Mail Service Center
Raleigh, North Carolina 27699-1612
Please note-
The submission of this document does not guarantee the issuance of NPDES permit coverage.
For questions, please contact the DEMLR Regional Office for your area.
To visit our website please go to hn.11portal.ncdenr.ora/weblir/stormwater
DEMLR Regional Office Contact Information:
Asheville Office ......
[phone]
Fayetteville Office ...
[phone]
Mooresville Office ...
[phone]
Raleigh Office ........
[phone]
Washington Office ...
[phone]
Wilmington Office...
[phone]
Winston-Salem ......
[phone]
Central Office .........
[phone]
Page 4 of 4
SWU-235-012815 Last revised 01/28/15

I
IMET Alloys. Horizon Engineering & Consulting, Inc.
Stormwater Pollution Prevention Plan - Site Location Map 2510 Waiker Road
Scale: 1:24000 Mt. Pleasant, N.C. 28214 December 8, 2016
USGS Quadrangles — Monroe/Wingate

N
Cn
L7 0
w �
�
o
z�
�CL
OD
_N
A
0
i
j
Outfall0011
Site Bounds (Property Line) i
■rd■�,Qraiinag A ea (Sheet Runo
■�� �� f,r�t�►�kZ1,1a��1►�ii
Drainage
Area 1 (Outfall 00
waorp.r...« f
Impervious Area
Materials stora e
• g 1MET Alloys Building
Drainage Area 2 (Outfall 002)I
Area Not Controlled by IMET
Outfall 002 i� Area of vehicle fuel (propane) -
Drainage Area 3 (Sheet Runoff) j
Materials storage ���J�� Nr—
i b1 t�.4 impervious Area 11 j 5
Impervious Area
Materials storage I

STATE Oh NORTH CAROLINA
DEPARTMENT OF ENVIRONMENTAL QUALITY
DIVISION OF ENERGY, MINERAL AND LAND RESOURCES
GENERAL PERMIT NO. NCG200000
CERTIFICATE OF COVERAGE No. NCG200516
STORMWATER DISCHARGES
NATIONAL POLLUTANT DISCHARGE ELIMINATION SYSTEM
In compliance with the provision ofNorth Carolina General Statute 143-215.1, other lawful
standards and regulations promulgated and adopted by the North Carolina Environmental
Management Commission, and the Federal Water Pollution Control Act, as amended,
IMET Alloys
is hereby authorized to discharge stormwater from a facility located at
IMET Alloys
3000 Stitt Street, Suite 150
Monroe
Union County
to receiving waters designated as Joes Branch, a class C water in the Yadkin River Basin, in
accordance with the effluent limitations, monitoring requirements, and other conditions set forth
in Parts 1, II, III, and IV of General Permit No. NCG200000 as attached.
This certificate of coverage shall become effective February 22, 2017.
This Certificate of Coverage shall remain in effect for the duration of the General Permit.
Signed this day February 22, 2017.
ORIGINAL SIGNED BY
BETHANY GEORGOULIAS
for Tracy E. Davis, P.E., CPM
Director, Division of Energy, Mineral and Land Resources
By the Authority of the Environmental Management Commission

L
Tr
C�
o
a • �� r VO
U o _
IMET Alloys
� `_� ;'_.� � -� �s� �•.� �� fly.
CC
NCG200516 IMET Alloys
Latitude: 340 59' 07" N
N Longitude: 800 29' 40" W
County: Union
W Receiving Stream: Joes Branch
Index No: 13-17-36-7
S Stream Class: C
Sub -basin: 03-07-14 (Yadkin River Basin)
Map Scale I:24,000 Facility location