Loading...
HomeMy WebLinkAbout2-20210826_Mine_ApplicationNORTH CAROLINA MINING PERMIT APPLICATION State of North Carolina Department of Environment and Natural Resources � Division of Land Resources Land Quality Section 1612 Mail Service Center Raleigh, North Carolina 27699-1612 (919) 733-4574 Revised: January 30, 2008 APPLICATION FOR A MINING PERMIT NORTH CAROLINA DEPARTMENT OF ENVIRONMENT AND NATURAL RESOURCES LAND QUALITY SECTION APPLICATION FOR A MINING PERMIT (PLEASE PRINT OR TYPE) Name of Mine: Mountain Mist Mine County: McDowell River Basin Catawba Latitude (decimal degrees to four places): 035.750922N Longitude (decimal degrees to four places): 082.042681 W, 2. Name of Applicant* Wavcaster Stone Co Inc. 3. Permanent address for receipt of official mail** 5455 US Highway 221 North Marion NC 28752 Telephone: (828)-756-4011 Alternate �t Mine Office Address 5455 US Highway 221 North Marion, NC 28752 Telephone: (828)-756-4011 5. Mine Manager Kenneth Wavcaster We hereby certify that all details contained in this Permit Application are true and correct to the best of our knowledge. We fully understand that any willful misrepresentation of facts will be cause for permit revocation. *** Date fz?08-�0 Print Title President This will be the name that the mining permit will be issued to and the name that must be indicated on the reclamation bond (security) that corresponds to this site. * * The Land Quality Section must be notified of any changes in the permanent address or telephone number. * * * Sienature of company officer required. S. 74-51 provides that the Department shall grant or deny an application for a permit within 60 days of receipt of "-ecomolete application or, if a public hearing is held, within 30 days following the hearing and the filing of any supplemental information required by the Department. All questions must be addressed and all required maps provided before this application can be considered complete. Attach additional sheets as needed. APPLICATION FOR A MINING PERMIT NOTE: All of the following questions must be thoroughly answered regarding your mining operation for the intended life of the mine. All responses must be clearly conveyed on a corresponding, detailed mine map. �. GENERAL CHARACTERISTICS OF THE MINE 1. Answer all of the following that apply: X If this is an application for a NEW permit, indicate the total acreage at the site to be covered by the permit (this is the acreage that the "new permit" fee will be based upon): 26.3 Of this acreage, how much is owned and how much is leased? Acres owned: if.9 41f, Acres leased: 0 •�P I- Property owner if leased: /1/R Ao' r ❑ If this is an application for RENEWAL of a mining permit, indicate the mining permit number and the total (overall) acreage covered by the existing permit: Mining Permit No.: Total permitted acreage (this is the acreage that the "renewal" fee will be based upon): ❑ If this is an application for a MODIFICATION to a mining permit, indicate the mining permit number and the total (overall) acreage covered by the existing permit. Mining Permit No.: Total permitted acreage: Does the modification involve acreage within the previously approved permitted boundary? Yes ❑ No ❑. If yes, indicate the acreage to be covered by this modification (this is the acreage that the "major modification" fee will be based upon): Does the modification involve acreage outside the previously approved permitted boundary? Yes ❑ No ❑. If yes, indicate the additional acreage to be covered by this modification: . (NOTE: you must complete all of Section F. of this application form entitled Notification of Adjoining Landowners). Of this acreage to be added to the permit, will any portion of this acreage be affected (i.e.: disturbed, ground cover removed) by the mining operation? Yes ❑ No ❑ (If no, a "minor modification" fee of $100.00 is required, despite the "undisturbed" acreage to be added). If yes, indicate the acreage to be affected within the acreage to be added to the permit (the total acreage to be added to the permit is the acreage that the "major modification" fee will be based upon): ❑ If this is an application for TRANSFER of a mining permit, indicate the mining permit number and the total (overall) acreage covered by the existing permit. Mining Permit No.: Total permitted acreage: SEE THE FEE SCHEDULE AT THE END OF THIS FORM FOR THE PROPER FEE AMOUNT TO BE PAID FOR THE REQUESTED PERMIT ACTIONS) AND CORRESPONDING ACREAGE NOTED ABOVE 2. Name of all materials mined: Granite 3. Mining method: Hydraulic Dredge Dragline & Truck Other (explain): Front-end Loader & Truck X Shovel & Truck Self -loading Scraper 4. a. Expected maximum depth of mine (feet) 90, Depth is relative to what benchmark? (e.g., natural ground level, mean sea level, road elevation, etc.) Top of high wall b. Expected average depth of mine (feet) 60' -2- APPLICATION FOR A MINING PERMIT 5. Has any area(s) at this site been mined in the past? Yes X No ❑ If yes, when and by whom was this activity conducted? Mining was by several unknown individuals ""/ 6. Number of years for which the permit is requested (10 years maximum): 10 B. MAPS 1. Clearly mark and label the location of your mining operation on six (6) copies of a 7.5-minute quadrangle and a county highway map. These maps, in addition to six (6) copies of all mine maps and reclamation maps, must be submitted with each permit application. 7.5-minute quadrangles may be obtained from the N.C. Geological Survey: Mailing Address: Physical Address: 1612 Mail Service Center OR 512 North Salisbury Street, 51h Floor Raleigh, North Carolina 27699-1612 Raleigh, North Carolina 27604 (919)733-2423 www.geologv.enr.state.nc.us/ County highway maps may be obtained from the N.C. Department of Transportation: North Carolina Department of Transportation — Geographic Information Systems (GIS) Mailing Address: Phvsical Address: NCDOT GIS Unit NCDOT GIS Unit 1587 Mail Service Center 3401 Carl Sandburg Court Raleigh, North Carolina 27699-1587 Raleigh, North Carolina 27610 (919)212-6000 www.ncdot.org/it/gisContact/default.html �./ 2. Mine maps must be accurate and appropriately scaled drawings, aerial photographs or enlarged topographic maps of the entire mine site. All aspects of the mine site must be clearly labeled on the maps along with their corresponding (approximate) acreage. As a reminder, mining permits can only be issued for up to 10 years; thus, all mine and reclamation maps must only denote those activities that are intended to be conducted during the life of the mining permit. All maps must be of a scale sufficient (see minimum requirements listed below) to clearly illustrate the following, at a minimum: a. Property lines of the tract or tracts of land on which the proposed mining activity is to be located including easements and rights -of -way. b. Existing or proposed permit boundaries. c. Initial and ultimate limits of clearing and grading. d. Outline and width of all buffer zones (both undisturbed and unexcavated). e. Outline and acreage of all pits/excavations. f. Outline and acreage of all stockpile areas. g. Outline and acreage of all temporary and/or permanent overburden disposal areas. h. Location and acreage of all processing plants (processing plants may be described as to location and distance from mine if sufficiently far removed). i. Locations and names of all streams, rivers and lakes. j. Outline and acreage of all settling and/or processing wastewater ponds. k. Location and acreage of all planned and existing access roads and on -site haul roads. 1. Location of planned and existing on -site buildings. m. Location and dimensions of all proposed sediment and erosion control measures. n. Location of 100-year floodplain limits and wetland boundaries. o. Names of owners of record, both public and private, of all tracts of land that are adjoining the mining permit boundary; if an adjoining tract is owned or leased by the applicant or is owned by the lessor \/ of the mine tract, names of owners of record of tracts adjoining these tracts, that are within 1,000 feet of the mining permit boundary, must be provided on the mine map. -3- APPLICATION FOR A MINING PERMIT p. Names of owners of record, both public and private, of all tracts of land that are adjoining the mining permit boundary which lie directly across and are contiguous to any highway, creek, stream, river, or other watercourse, railroad track, or utility or other public right-of-way. If an adjoining tract is owned or leased by the applicant or is owned by the lessor of the mine tract, names of owners of record of tracts adjoining these tracts, that are within 1,000 feet of the mining permit boundary, must be provided on the mine map(s). NOTE: "Highway" means a road that has four lanes of travel or less and is not designated as an Interstate Highway. q. Map legend: 1. Name of applicant 2. Name of mine 3. North arrow 4. County 5. Scale 6. Symbols used and corresponding names 7. Date prepared and revised 8. Name and title of person preparing map Map scales should meet the following guidelines: PERMITTED ACREAGE MAP SCALE 0-49 Acres 1 inch = 50 feet 5 0-199 Acres 1 inch =100 feet 200+ Acres 1 inch = 200 feet (NOTE: Smaller scaled maps may be acceptable if they clearly illustrate the above items) -4- APPLICATION FOR A MINING PERMIT A table/chart must be provided on the mine map that clearly lists the approximate acreage of tailings/sediment ponds, stockpiles, wastepiles, processing area/haul roads, mine excavation and any other major aspect of the mining operation that is proposed to be affected/disturbed during the life of the mining permit. A table/chart similar to the following will be acceptable: CATEGORY AFFECTED ACREAGE Tailings/Sediment Ponds 0.128 Stockpiles (included in Excavations) 0 Wastepiles 0.494 Processing Area/Haul Roads 1.55 Mine Excavation 3.565 Other (Explain)(Ditches Berms& etc.) 0.20 Total Disturbed Acreage 5.937 NOTE: 'mw� IN ADDITION TO THE ABOVE, THE MAPS MUST ALSO INCLUDE ANY SITE -SPECIFIC INFORMATION THAT IS PROVIDED IN THE ANSWERS TO THE FOLLOWING QUESTIONS IN THIS APPLICATION FORM (PLEASE NOTE THE ITALICIZED QUESTIONSISTATEMENTS THROUGHOUT THE FORM). THIS APPLICATION WILL NOT BE CONSIDERED COMPLETE WITHOUT ALL RELEVANT ITEMS BEING ADEQUATELY ADDRESSED ON THE MINE MAPS. -5- APPLICATION FOR A MINING PERMIT PROTECTION OF NATURAL RESOURCES `"■'' 1. Describe in detail the sequence of events for the development and operation of the mine and reference the sequence to the mine map(s). Attach additional sheets as needed. Mine was developed several years ago and has been mines by several different individuals. The mine will combine two smaller mines into one with a common entrance road. The site is stable at present with no offsite sedimentation or runoff flow. The mine once permitted will start by placing soil and erosion control measures as shown on the permit application at the two main mining locations at the end of the entrance road. As the mining progresses into the areas shown the erosion controls shown will be built and maintained. Current roads in the area are from past mining and mineral exploration 1140� 2. Describe specific erosion control measures to be installed prior to land disturbing activities and during mining to prevent offsite sedimentation (include specific plans for sediment and erosion control for mine excavation(s), waste piles, access/mine roads and process areas), and give a detailed sequence of installation and schedule for maintenance of the measures. Locate and label all sediment and erosion control measures on the mine map(s) and provide typical cross-sections/construction details of each measure. Engineering designs and calculations are required to justify the adequacy of any proposed measures. See attached soil and erosion control details and the attached maps for their locations. 3. a. Will the operation involve washing the material mined, recycling process water, or other waste water handling? Yes ❑ No X. If yes, briefly describe all such processes including any chemicals to be used. b. Will the operation involve discharging fresh or waste water from the mine or plant as a point discharge to the waters of the State? Yes ❑ No X. If yes, briefly describe the nature of the discharge and locate all proposed discharge points (along with their method of stabilization) on your mine map(s). -6- APPLICATION FOR A MINING PERMIT c. Will any part of the proposed mine excavation(s) extend below the water table? Yes ❑ No X If yes, do you intend to dewater the excavation(s)? Yes ❑ No ❑. If yes, what impact, if any, will mine dewatering have on neighboring wells? Estimated withdrawal rate in gallons per day: . Locate all existing wells on the mine maps) that lie within 500 feet ohe proposed excavation area. Provide data to support any conclusions or statements made, including any monitoring well data, well construction data and current water withdrawal rates. Indicate whether the proposed mine locale is served by a public water system or private wells. d. If you answered yes to any of the above questions, provide evidence that you have applied for or obtained the appropriate water quality permit(s) (i.e., non -discharge, NPDES, Stormwater, etc.) from the Division of Water Quality, Water Quality Section. In addition, the applicant is required to register water use with the Division of Water Resources if the operation withdraws more than 10,000 gallons per day and needs a capacity use permit from the Division of Water Resources if the operation lies in a capacity use area and withdraws more than 100,000 gallons per day. 4. a. Will the operation involve crushing or any other air contaminant emissions? Yes ❑ No X. If yes, indicate evidence that you have applied for or obtained an air quality permit issued by the Division of Air Quality or local governing body. b. How will dust from stockpiles, haul roads, etc., be controlled? Dust emissions at the mine site will be controlled by wet suppression -7- APPLICATION FOR A MINING PERMIT en 5. a. A buffer will be required between any mining activity and any mining permit boundary or right-of- way. It may be an unexcavated buffer (no excavation, but roadways, berms and erosion & sedimentation control measures may be installed within it), an undisturbed buffer (no disturbance within the buffer whatsoever), or a combination of the two, depending upon the site conditions. Note that all buffers must be located within the mining permit boundaries. How wide a buffer will be maintained between any mining activity and any mining permit boundary or right-of-way at this site? A minimum buffer of 25 feet is recommended, although a wider buffer may be needed depending on site conditions. Show all buffer locations and widths on the mine map (s). A minimum 25' buffer will be maintained along all permit boundaries but the buffer may be larger in certain areas of the site. See attached maps for buffers b. A minimum 50 foot wide undisturbed buffer will be required between any land disturbing activities within the mining permit boundaries and any natural watercourses and wetlands unless smaller undisturbed buffers can be justified. Depending on site conditions, a buffer wider than 50 feet may be needed. How wide an undisturbed buffer will be maintained between any land disturbing activities within the mining permit boundaries and any natural watercourses and wetlands at this site? Show all buffer locations and widths on the mine map(s). A 50' Minimum buffer will be along all streams. 6. a. Describe methods to prevent landslide or slope instability adjacent to adjoining permit boundaries during mining. Minimum 2 horizontal to 1 vertical slopes or flatter for clayey material and minimum 3 horizontal to 1 vertical slopes or flatter for sandy material are generally required, unless technical justification can be provided to allow steeper slopes. Mining will be performed using the bench method for safety, access and to reduce slope instability thus preventing slides and the associated dangers. Proper sloping of all wastepiles will be observed final slopes will not exceed an angle of 2:1. -8- APPLICATION FOR A MINING PERMIT b. Provide a cross-section on the mine map(s) for all fill slopes (berms, wastepiles, overburden disposal areas, etc), clearly indicating the intended side slope gradient, installation of any benches and/or slope drains (with supporting design information) if needed, and the method of final stabilization. M See Attached c. In excavation(s) of unconsolidated (non -rock) materials, specify the angle of all cut slopes including specifications for benching and sloping. Cross -sections for all cut slopes must be provided on the mine map(s). See Attached d. In hardrock excavations, specify proposed bench widths and heights in feet. Provide cross -sections of the mine excavation clearly noting the angles of the cut slopes, widths of all safety benches and mine benches, and the expected maximum depth of the excavation. See Attached Drawing for future mining past mining has left highwalls that may be benched but may be in the 50' unexcavated buffer area. 7. Describe other methods to be taken during mining to prevent physical hazard to any neighboring dwelling house, public road, public, commercial or industrial building from any mine excavation. Locate all such structures on the mine map if they are within 300 feet of any proposed excavation. See Attached 8. Describe what kind of barricade will be used to prevent inadvertent public access along any high wall area and when it will be implemented. Vegetated earthen berms, appropriate fencing and adequate boulder barriers may be acceptable high wall barricades. A construction detail/cross-section and location of each type of barricade to be used must be indicated on the mine map(s). See Attached details of barricades used to prevent entry to the mine site. -9- APPLICATION FOR A MINING PERMIT 9. Are acid producing minerals or soils present? Yes ❑ No X. 14v� If yes, how will acid water pollution from the excavation, stockpiles and waste areas be controlled? 10. a. Describe specific plans (including a schedule of implementation) for screening the operation from public view such as maintaining or planting trees, bushes or other vegetation, building berms or other measures. Show the location of all visual screening on the mine maps) and provide cross - sections through all proposed berms or proposed spacing, sizes and species for tree plantings. The highwall portion of the mines are visible from highway 221 but only n a short section of the roadway. The mine is not visible from the Blueridge Parkway nor Lake James. (see attached line of sight). b. Could the operation have a significantly adverse effect on the purposes of a publicly owned park, forest or recreation area? If so, how will such effects (i.e., noise, visibility, etc.) be mitigated? No Parks are located near the mine site. 11. Will explosives be used? Yes X No ❑. If yes, specify the types of explosive(s) and describe what precaution(s) will be used to prevent physical hazard to persons or neighboring property from flying rocks or excessive air blasts or ground vibrations. Depending on the mine's location to nearby structures, more detailed technical information may be required on the blasting program (such as a third -party blasting study). Locate the nearest offsite occupied structure(s) to the proposed excavations) on the mine map and indicate its approximate distance to the proposed excavation. See Attached Blasting plan and see mine map for dwelling location and distance 12. Will fuel tanks, solvents, or other chemical reagents be stored on -site? Yes ❑ No X. Ifyes, describe these materials, how they will be stored and method of containment in case of spill. Indicate the location(s) of all storage facilities on the mine map(s). -10- APPLICATION FOR A MINING PERMIT RECLAMATION PLAN 1. Describe your intended plan for the final reclamation and subsequent use of all affected lands and indicate the sequence and general methods to be used in reclaiming this land. This must include the method of reclamation of settling ponds and/or sediment control basins and the method of restoration or establishment of any permanent drainage channels to a condition minimizing erosion, siltation and other pollution. This information must be illustrated on a reclamation map and must correspond directly with the information provided on the mine map(s). In addition, design information, including typical cross -sections, of any permanent channels to be constructed as part of the reclamation plan and the location(s) of all permanent channels must be indicated on the reclamation map. Any and all buildings usable as real property will remain intact as well as the entrance road for access and any roads needed to access adjoining property. Buildings and outside equipment not usable will be torn down, removed and recycled and the areas graded and sloped to blend with surrounding topography. All soil and erosion control measures will be left in place (as feasible) until all areas are stable. When the areas are stable, the controls will be removed and or converted to permanent armored ditches. Any highwall left will be protected by a permanent fence, or other barriers to prevent access and warn of danger. See attached drawings of barricades and fencing 2. Is an excavated or impounded body of water to be left as a part of the reclamation? Yes ❑ No X. If yes, illustrate the location of the body(s) of water on the reclamation map and provide a scaled cross -sections) through the proposed body(s) of water. The minimum water depth must be at least 4 feet, measured from the normal low water table elevation, unless information is provided to indicate that a more shallow water body will be productive and beneficial at this site. Will the body(s) of water be stocked with fish? Yes ❑ No ❑ If yes, specify species. 3. Describe provisions for safety to persons and to adjoining property in all completed excavations in rock including what kind of permanent barricade will be left. Acceptable permanent barricades are appropriate fencing, large boulders placed end -to -end, etc. Construction details and locations of all permanent barricades must be shown on the reclamation map. See attached fencing and barricade details. -11- APPLICATION FOR A MINING PERMIT 4. Indicate the method(s) of reclamation of overburden, refuse, spoil banks or other such on -site mine llft� waste areas, including specifications for benching and sloping. Final cross -sections and locations for such areas must be provided on the reclamation map. All overburden and waste materials will be dumped in levels not to exceed 45' in height. A 8' (minimum) bench will be used to carry runoff from slopes above. Finished slopes will be a minimum of 2:1 and flatter as natural slope permits. 5. a. Describe reclamation of processing facilities, stockpile areas, and on -site roadways. Any and all buildings usable as real property will remain intact as well as the entrance road for access and any roads needed to access adjoining property, Forestlands and farmlands. Buildings and outside equipment not usable will be torn down, removed and recycled and the areas graded and sloped to blend with surrounding topography. b. Will any on -site roadways be left as part of the reclamation? Yes X No ❑. If yes, identify such roadways on the reclamation map and provide details on permanent road and ditch line stabilization. The existing road will be left as an access to the lands past the mining site. 6. Describe the method of control of contaminants and disposal of scrap metal, junk machinery, cables, or other such waste products of mining. (Note definition of refuse in The Mining Act of 1971.) No off -site generated waste shall be disposed of on the mine site without prior written approval from the NC Department of Environment and Natural Resources, Land Quality Section and either the Division of Waste Management (DW1VI) or local governing body. If a disposal permit has been issued by DWM for the site, a copy of said permit must be attached to this application. All temporary and permanent refuse disposal areas must be clearly delineated on the mine map(s) and reclamation map, along with a list of items to be disposed in said areas. Solid Waste generated by the mining activity will be shipped offsite for proper disposal. Scrap metal and other usable materials will be recycled on as regular and as needed basis. A lay down yard for used equipment and spare parts will be maintained in a neat and orderly fashion. -12- APPLICATION FOR A MINING PERMIT 7. Describe your plan for revegetation or other surface treatment of the affected areas. This plan must r./ include recommendations for year-round seeding, including the time of seeding and the amount and type of seed, fertilizer, lime and MTV acre. The recommendations must include general seeding instructions for both permanent and temporary revegetation. Revegetation utilizing only tree plantings is not acceptable. Recommendations can be sought from: 1%/ a. Authorized representatives of the local Soil and Water Conservation District; b. Authorized representatives of the Division of Forest Resources, Department of Environment and Natural Resources; c. Authorized county representatives of the North Carolina Cooperative Extension Service, specialists and research faculty with the Colleges of Agriculture and Life Sciences and Forest Resources at North Carolina State University; d. North Carolina licensed landscape architects; e. Private consulting foresters referred by the Division of Forest Resources, Department of Environment and Natural Resources; f. N.C. Erosion and Sedimentation Control Planning and Design Manual; g. N.C. Surface Mining Manual: A Guide for Permitting, Operation and Reclamation; h. Others as may be approved by the Department. LIME - RATE OF APPLICATION (tons/acre): FERTILIZER - ANALYSIS AND RATE OF APPLICATION (pounds/acre): SEED - TYPE(S) AND RATE(S) OF APPLICATION INCLUDING YEAR-ROUND SEEDING SCHEDULE (pounds/acre): [NOTE: Include Legumes] Seed Types: Seeding Dates: See Attached Vegetation Plan and Soils map Seeding Rates: MULCH - TYPE AND RATE OF APPLICATION (pounds/acre) AND METHOD OF ANCHORING: OTHER VEGETATIVE COVERS — TYPE (S) AND RATE (S) OF APPLICATION INCLUDING SEEDING SCHEDULE (pounds/acre, trees/acre, spacing of trees/shrubs, etc): Revegetation and/or peforesta .6 1` approved by: y/ Signatur /�/— Date Print Name: Thomas Fre man Title _Certified Professional in Soil and Erosion Control Agency Envirocert -13- APPLICATION FOR A MINING PERMIT DETERNIINATION OF AFFECTED ACREAGE AND BOND The following bond calculation worksheet is to be used to establish an appropriate bond (based upon a range of $500 to $S, 000 per affected acre) for each permitted mine site based upon the acreage approved by the Department to be affected during the life of the miningpermit. Please insert the approximate acreage, for each aspect of the mining operation, that you intend to affect duringthe he life ofthis miningpermit (in addition, please insert the approDriate reclamation cost/acre for each caLego1y ftm the Schedule of Reclamation Costs provided with this a placation form) OR you can defer to the Department to calculate your bond for you based AFFECTED RECLAMATION RECLAMATION CATEGORY ACREAGE COST/ACRE* COST Tailings/Sediment Ponds: Ac. X $ /Ac. _ $ Stockpiles: Ac. X $ /Ac. _ $ Wastepiles: Ac. X $ /Ac. _ $ Processing Area/Haul Roads: Ac. X $ /Ac. _ $ Mine Excavation: Ac. X $ /Ac. _ $ Other: Ac. X $ /Ac. _ $ TOTAL AFFECTED AC.: Ac. (TOTAL PERMITTED AC.: Ac.) Temporary & Permanent Sedimentation & Erosion Control Measures: Divide the TOTAL AFFECTED AC. above into the following two categories: a) affected acres that drain into proposed/existing excavation and/or b) affected acres that will be graded for positive drainage where measures will be needed to prevent offsite sedimentation and sedimentation to onsite watercourses and wetlands. a) Internal Drainage Ac. b) Positive Drainage Ac. X $1,500.00 = $ SUBTOTAL COST: $ Inflation Factor: 0.02 X SUBTOTAL COST: $ X Permit Life (1 to 10 years): INFLATION COST: $ TOTAL COST = SUBTOTAL COST + INFLATION COST = $ Total Reclamation Bond Cost: $ (round down to the nearest $100.00) -14- APPLICATION FOR A MINING PERMIT W. NOTIFICATION OF ADJOINING LANDOWNERS The "Notice" form, or a facsimile thereof, attached to this application must be sent certified or registered mail, return receipt requested, to: (1) the chief administrative officer of each county and municipality in which any part of the permitted area is located as indicated on the mine map(s); (2) all owners of record, both public and private, of all tracts of land that are adjoining the mining permit boundary; if an adjoining tract is owned or leased by the applicant or is owned by the lessor of the mine tract, all owners of record of tracts adjoining these tracts must be notified (that are within 1,000 feet of the mining permit boundary) as indicated on the mine map(s); and (3) all owners of record, both public and private, of all tracts of land that are adjoining the mining permit boundary which lie directly across and are contiguous to any highway, creek, stream, river, or other watercourse, railroad track, or utility or other public right-of-way. If an adjoining tract is owned or leased by the applicant or is owned by the lessor of the mine tract, all owners of record of tracts adjoining these tracts must be notified (that are within 1,000 feet of the mining permit boundary) as indicated on the mine map(s). "Highway" means a road that has four lanes of travel or less and is not designated as an Interstate Highway. The only exception to the above method of giving notice is if another means of notice is approved in advance by the Director, Division of Land Resources. A copy of a tax map (or other alternative acceptable to the Department) must be mailed with the completed "Notice" form (the proposed overall permit boundaries and the names and locations of all owners of record of lands adjoining said boundaries must be clearly denoted on the tax map). The "Affidavit of Notification" attached to this application must be completed, notarized and submitted to the Department, with the remainder of the completed application form, before the application will be considered complete. THIS SECTION MUST BE COMPLETED FOR ALL APPLICATIONS FOR NEW MINING PERMITS AND ALL MODIFICATIONS OF A MINING PERMIT TO ADD LAND TO THE PERMITTED AREA, AS REQUIRED BY NCGS 74-50(bl). SEE THE NEXT TWO PAGES FOR THE "NOTICE" FORM AND THE "AFFIDAVIT OF NOTIFICATION" -15- NOTICE Pursuant to provisions G.S. 74-50(bl) of The Mining Act of 1971, Notice is hereby given that 1-qm�aycaster Stone Co. Inc has applied on 8-19-21 (Applicant Name) (Date) to the Land Quality Section, Division of Land Resources, North Carolina Department of Environment and Natural Resources, 1612 Mail Service Center, Raleigh, North Carolina 27699-1612, for (check one): X a new surface mining permit, ❑ a modification of an existing surface mining permit to add land to the permitted area; or ❑ a modification of an existing surface mining permit to add land to the permitted area with no disturbance in the area proposed. Please note that future modification(s) may be submitted by the applicant to allow disturbance within this area without re -notification of adjoining landowners. The applicant proposes to mine Quartzite Building Stone on 26.3 acres located 6.2 (Mineral, Ore) (Number) (Miles) N of Downtown of Marion * off/near road Hicks Chapel Loon (Direction) (Nearest Town) (Number/Name) in McDowell County. *SEE ATTACHED MAP FOR PROPOSED PERMIT BOUNDARIES AND CORRESPONDING ADJOINING LANDOWNER NAMES AND LOCATIONS* Daccordance with G.S. 74-50(bl), the mine operator is required to make a reasonable effort, satisfactory to the epartment, to notify all owners of record, both public and private, of all tracts of land that are adjoining the mining permit boundary; if an adjoining tract is owned or leased by the applicant or is owned by the lessor of the mine tract, all owners of record of tracts adjoining these tracts must be notified (that are within 1,000 feet of the mining permit boundary). In addition, the mine operator must also notify the chief administrative officer of the county or municipality in which any part of the permitted area is located. Any person may file written comment(s) to the Department at the above address within thirty (30) days of the issuance of this Notice or the filing of the application for a permit, whichever is later. Should the Department determine that a significant public interest exists relative to G.S. 74-51, a public hearing will be held within 60 days of the end of the 30-day comment period specified above. A copy of the permit application materials is on file and available for public review during normal business hours at the above listed address as well as at the appropriate regional office. For information regarding specifics of the proposed mining activity. please contact the applicant at the following telephone numl . For information on the miring permit application review process, please contact gram staff at (919) 733-4574. Please note that the Department will consider any relevant written unentation within the provisions of the Mining Act of 1971 throughout the application review final decision is made on the application. (Addressee/Owner of Record's Name and Address) ate of Issuance of this Notice/ Mailed to Addressee/Owner of Record) -16- Kenneth Waycaster, Waycaster Stone Co, Inc (Name of Applicant: Include Contact Person & Company Name, if Applicable) 5455 US Highway 221 North, Marion, NC 28752 (Address of Applicant) APPLICATION FOR A MINING PERMIT AFFIDAVIT OF NOTIFICATION Kenneth Waycaster_, an applicant, or an agent, or employee of an applicant, for a new Mining Permit, or a modification of an existing Mining Permit to add land to the permitted area, from the N.C. Department of Environment and Natural Resources, being first duly swom, do hereby attest that the following are all known owners of record, both public and private, of all tracts of land that are adjoining the mining permit boundary (including, where an adjoining tract is owned or leased by the applicant or is owned by the lessor of the mine tract, all owners of record of tracts adjoining these tracts, that are within 1,000 feet of the mining permit boundary) and that notice of the pending application has been caused to be mailed, by certified or registered mail, return receipt requested, to said owners of record at their addresses shown below, such notice being given on a form provided by the Department: (Adjoining Landowner Name) (see attached) (Address) (Attach additional list if necessary) I do also attest that the following individual is the chief administrative officer of the county or municipality in which any part of the permitted area is located and that notice of the pending application has been caused to be mailed, by certified or registered mail, return receipt requested, to said office at the following address: (Chief Administrative Officer Name) [i.e.: City Manager, County Manager, Mayor, etc.] shley R Wooten, McDowell County Manager (Address) 60 East Court Street, Marion, NC 28752 "wthe above attestation was made by me while under oath to provide proof satisfactory to the Department that a reasonable effort has been made to notify all known owners of record, both public and private, of all tracts of land that are adjoining the mining permit boundary (including, where an adjoining tract is owned or leased by the applicant or is owned by the lessor of the mine tract, all owners of record of tracts adjoining these tracts, that are within 1,000 feet of the mining permit boundary) and the chief administrative officer of the county or municipality in which any part of the permitted area is located in compliance with N.C.G.S. 74-50(bl) and 15A NCAC 5B .0004(d). I understand that it is the responsibility of the applicant to retain the receipts of mailing showing that the above notices were caused to be mailed and to provide them to the Department upon request. ��� - 8-ie-ai 6` Signatide o Applicant or Agent Date If person executing Affidavit is an agent or employee of an applicant, provide the following information: Name of applicant: Title of person executing Affidavit I, a Notary Public of the County of , State of North Carolina, do hereby certify that appeared before me this day and under oath acknowledged that the above Affidavit was made by him/her. Witness my hand and notarial seal, this day of 20_. 4otary: S./ my Commission expires: MUM APPLICATION FOR A MINING PERMIT LAND ENTRY AGREEMENT We hereby grant to the Department or its appointed representatives the right of entry and travel upon our lands or operation during regular business hours for the purpose of making necessary field inspections or investigations as may be reasonably required in the administration of the Mining Act of 1971 pursuant to G.S. 74-56. We further grant to the Department or its appointed representatives the right to make whatever entries on the land as may be reasonably necessary and to take whatever actions as may be reasonably necessary in order to carry out reclamation which the operator has failed to complete in the event a bond forfeiture is ordered pursuant to G. S. 74-59. LANDO ER: APPLICANT: Signature Signature:* Print Name: EVa-✓21e. i A-c 5 P2CK Print Name: Kenneth Wavcaster (Title, if applicable) Company _Carolina Greystone Quarries, LLC_ Title: President (If applicable) Address: P.O. Box Old Fort, NC 28762 *./ Telephone: _828-659-7777 Date Signed: g-12 - ZI Company: Waycaster Stone Co. Inc Mine Name: Mountain Mist Mine Telephone: (828 )-756-401 Date Signed: *Signature must be the same as the individual who signed Page 1 of this application. or money c sent to the form. essin¢ Fee (see next page for fee schedule) in the form a check zpartment of Environment and Natural Resources must be at the address listed on the front cover of this application Inquiries regarding the status of the review of this application should be directed to the Mining Program staff at (919)733-4574. is- APPLICATION FOR A MINING PERMIT MINING FEE SCHEDULE A ^nrefundable permit application processing fee when filing for a new mining permit, a major permit modification or a renewal permit is juired as follows: New Permit Applications Permit Modifications Permit Renewals Transfers/Minor Modifications* 0-25 acres $3,750.00 $750.00 $750.00 $100.00 2f +a nres $5,000.00 $1,000.00 $1,000.00 $100.00 * A nonrefundable $100.00 permit application processing fee is required for minor permit modifications. Minor permit modifications include ownership transfers, name changes, bond substitutions and permit renewals where the mine is inactive and fully stabilized. A minor permit modification also includes lands added to a permitted area, outside of the minimum permit buffer zone requirements, where no plans for mining related disturbance of the added lands have been approved. All other changes are considered major permit modifications. Acres for new permits and renewal permits means the total acreage at the site. Acres for major modification of permits means that area of land affected by the modification within the permitted mine area, or any additional land that is to be disturbed and added to an existing permitted area, or both. M There are seven Land Quality Section (LQS) Regional Offices. Use the map below to locate the Regional Office serving your county. -19- e%N VEGET.�TION PLAN 1. All of the disturbed area will be covered with dirt and or gravel as needed to prepare for seeding or future use wit hin 21 days of completion of any phase of grading. 2. The surfaces to be seeded will be roughed and tilled to prepare a seed bed. p 3. The following Lime and fertilizer mix will be used to prepare the soil for the seeds: p Agricultural lime 2 000#/acre Fertilizer 1,000#/acre 4. The following seed specifications will be used payingspecial p attention to the date of seedingand seed s required for rthat � season: Dates Feb 15 -- March 31 Species Korean Lespedeza Rate #/acre 10 Fescue 40 Redtop / Cloves 1 April 1-- July 31 Winter Rye (grain) Common Bermuda 15 Aug. 1— Oct. 25 Lespedeza (unscarif ed) 50 30 Oct. 26 --Feb 14 German Millet Rye (grain .- temporary) 40 120 Spring / Summer Mixture (May, — September 15) Browntop Millet 20 Korean Lespedeza 20 VA 70 Lespedeza 1 Fall / winter (September 16 -- April 30) Rye (grain) 120 Korean Lespedeza 20 VA 70 Lespedeza 1 One of the following may also be added to the above mixture Crown Vetch 5 Ladino Clover 5 Alfalfa. 5 5. Surface mulch shall be applied after seeding to provide a means of controlling runoff and erosion in disturbed areas. Straw mulch shall be applied at the rate of 1 ton per acre. Straw should be dry, unchopped, unweathered and free of weeds. Wheat or oat straw is preferred and can be spread by machine or hand. Straw must be tacked down to avoid loss by wind. /1" 6. After a vegetation growth is established, fertilization will llft� continue as needed until a sod layer is established. 7. Decorative landscaping may be added later as a beautification project in stable areas, but only in areas not subject to erosion -and heavy runoff. 8. In areas where shade is dominating the mixture should substitute Orchard Grass and or Blue Grass for Fescue. 9. Temporary seeding should be performed using 40 pounds of German Millet or Rye .(grain) per acre and the fertilizer .and lime mix above. 10. Top dressing should be performed within 6 months if a vigorous growth has net been established.