AQ_F_2000126_20200513_CMPL_CAV-Rpt (4)

� c� UO12U — CAV
NORTH CAROLINA DIVISION OF Asheville Regional Office
AIR QUALITY Southern Concrete Materials Inc.-Ranger
NC Facility ID 2000126
Compliance Assurance Visit(CAV)Report: Partial Compliance Evaluation County/FIPS: Cherokee/039
Date: 05/19/2020
Facility Data Permit Data
Southern Concrete Materials Inc.-Ranger Permit n/a
395 Wingate Road Issued n/a
Murphy,NC 28906 Expires n/a
Lat: 35d 1.7340m Long: 84d 7.9510m Class/Status Permit Exempt
SIC: 3273 /Ready-Mixed Concrete Permit Status Inactive
NAICS: 32732/Ready-Mix Concrete Manufacturing Current Permit Application(s)None
Contact Data Program Applicability
Facility Contact Authorized Contact Technical Contact SIP
Thomas Ledford Jeff Lamm Jeff Lamm
Division Manager Vice Vice
[phone] President/Environmental Presidem/Environmental
Affairs Affairs
[phone] [phone]
Compliance Data
Comments:
Inspection Date 05/13/2020
Inspector's Name Richard Morris
Inspector's Signature: X/ � J� Operating Status Operating
o l Compliance Code Compliance-inspection
Action Code PCE
Date of Signature: 7� �� ' 2,v On-Site Inspection Result Compliance
Total Actual emissions in TONS/YEAR:
TSP S02 NOX VOC CO PM10 *HAP
2012 --- --- --- --- --- --- ---
2007
--- 0.0000 --- 0.0000 0.0000
*Highest HAP Emitted(inpounds)
Five Year Violation History:None
Date Letter Type Rule Violated Violation Resolution Date
Performed Stack Tests since last FCE:None
Date Test Results Test Method(s) Source(s)Tested
Compliance Assurance Visit (CAV) Report: Partial Compliance Evaluation

1) Location: Southern Concrete Materials Inc. - Ranger is located at 395 Wingate Road
in Ranger,NC. Cherokee Co.
Directions: Take Hwy 19/74/129 from Murphy to Hwy 64/74 West to Ranger.
Follow 64 west for approximately 11 miles. The facility is located off of the Hwy
on the right.
2) Facility Overview: Southern Concrete Materials Inc. - Ranger is a concrete batch
plant,producing concrete for commercial use. This facility is permit exempt
effective August 5, 2016. Last compliance inspection conducted on August 10, 2018
by Richard Morris
Safety: Steel toed shoes, eye protection
Current throughputs: Facility is not operating.
Pre-inspection Conference: On May 13,2020, I, Richard Morris with NC Air Quality,
called and spoke with Thomas Ledford who is the Facility Contact for Southern Concrete
Materials Inc. —Ranger. No site visit was made due to the Covid-19 stay-in-place order.
I asked to conduct a Partial Compliance Evaluation which is not an onsite visit.
Mr. Thompson is the Western Area Division Manager and told me that this plant has not
operated since my last visit on July 30, 2019. He informed me that this plant was used as
a back-up for the Andrews Plant on the Cherokee Casino. Very little production occurs
at this plant. There are no plans to run this facility full time in the near future.
Process Description: (AP-42)
Concrete is composed essentially of water, cement,sand(fine aggregate), and coarse
aggregate. Coarse aggregate may consist of gravel, crushed stone, or iron blast furnace
slag. Some specialty aggregate products could be either heavyweight aggregate (of
barite,magnetite, limonite, ilmenite, iron, or steel) or lightweight aggregate (with sintered
clay, shale, slate, diatomaceous shale, perlite,vermiculite, slag, pumice, cinders, or
sintered fly ash). Concrete hatching plants store, convey,measure, and discharge these
constituents into trucks for transport to a job site. In some cases, concrete is prepared at a
building construction site or for the manufacture of concrete products such as pipes and
prefabricated construction parts. The raw materials can be delivered to a plant by rail,
truck, or barge. The cement is transferred to elevated storage silos pneumatically or by
bucket elevator. The sand and coarse aggregate are transferred to elevated bins by front
end loader, clam shell crane, belt conveyor, or bucket elevator. From these elevated bins,
the constituents are fed by gravity or screw conveyor to weigh hoppers, which combine
the proper amounts of each material. Truck mixed(transit mixed) concrete involves
approximately 75 percent of U. S. concrete hatching plants. At these plants, sand,
aggregate, cement, and water are all gravity fed from the weigh hopper into the mixer
trucks. The concrete is mixed on the way to the site where the concrete is to be poured.
Central mix facilities (including shrink mixed) constitute the other one-fourth of the
industry. With these, concrete is mixed and then transferred to either an open bed dump

truck or an agitator truck for transport to the job site. Shrink mixed concrete is concrete
that is partially mixed at the central mix plant and then completely mixed in a truck mixer
on the way to the job site. Dry batching, with concrete mixed and hauled to the
construction site in dry form, is seldom, if ever,used.
Inspection:
Plant not operating.
3) Emission Source and Regulatory Review:
Sources are: (from last permit)
_..... --- -- -- ------_. _._. .. ....
Emission Emission Source Control Control System
Source ID Description System ID Description
;CSC__-___-----p ���� _ _ l
One truck mix concrete batch plant(maximum rated capacity of 100 cubic yards of concrete per hour)
consisting of the following:
ES 1 one flyash storage silo(75 tons of flyash CD-5 one bagfilter(170 square feet of
storage capacity) 1� I filter area) _
one cement storage silo(100 tons of cement one bagfilter(156 square feet of
storage capacity) _� CD-1
ES 2 LE� filter area)
one cement weigh hopper(100 cubic yards of one bagfilter(27 square feet of
I ES-4 lconcrete per hour maximum batching CD-3 (filter area)
capacity)
!I[ one water spray system(1.5
ES-5 Foneoncrete truck load out operation CD-4 gallons per minute min mum
water flow) j
Insignificant Sources:
Source Exemption Source of Source of Title V
Regulation_: TAPs?J Pollutants? f
I I -one natural as-fired boiler 2.2 million 2 0102 yes Yes
hour maximum heat input rate) (— p (c)O(B)(li)
I-2-Sand and aggregate delivery to ground storage, 2Q.0102 No Yes
transfer to conveyor, and transfer to elevated storage I (c()(E)(i)
I-3 -Sand and aggregate weigh hopper g�. O� No Yes
I. Applicable Regulations
The Company must comply with the following EMC Regulations for this application:
15A NCAC 2D .0515, "Particulates from Miscellaneous Industrial Processes"
15A NCAC 2D .0521, "Control of Visible Emissions"
15A NCAC 2D .0535, "Excess Emissions Reporting and Malfunctions"
15A NCAC 2D .0540, "Particulates from Fugitive Dust Emission Sources"
15A NCAC 2Q .0102, "Activities Exempted from Permit Requirements"
15A NCAC 2Q .0711, "Emission Rates Requiring a Permit"

Reporting requirements:
None
4) Compliance History Review:
None
5) Stack Test Review:
Not required
6) 112R Status: Based on the facility's inventory, it was decided that they are not
subject to 112R reporting requirements
7) Comments and Compliance Statement:
MIAMI-
/rem