HomeMy WebLinkAboutAQ_F_0200048_20200624_CMPL_InspRpt NORTH CAROLINA DIVISION OF Mooresville Regional Office
AIR QUALITY Mid-Atlantic Wood Products
NC FacilitylD 0200048
Inspection Report County/FIPS:Alexander/003
Date: 06/24/2020
Facility Data Permit Data
Mid-Atlantic Wood Products Permit 05990/Rl l
225 Dewey Elder Lane Issued 8/21/2015
Taylorsville,NC 29681 Expires 7/31/2023
Lat:35d 56.2950m Long: 8ld 15.2232m Class/Status Small
SIC: 2449/Wood Containers,Nee Permit Status Active
NAICS: 32192/Wood Container and Pallet Manufacturing Current Permit Application(s)None
Coutact Data Program Applicability
Facility Contact Authorized Contact Technical Contact SIP
Thad Carter Thad Carter Thad Carter
Plant Manager Plant Manager Plant Manager
(828)632-4252 (829)632-4252 (828)632-4252
Compliance Data
Comments:
Inspection Date 06/24/2020
Inspector's Name Sandra Sherer
Operating Status Operating
Inspector's Signature: Compliance.Code Compliance-inspection
San�ixa.Me=612512020 Action Code PCE
I{AK On-Site Inspection Result Compliance
Date of Signature:
Total Actual emissions in TONS/YEAR:
TSP S02 NOX VOC CO PM10 *HAP
2014 0.0200 --- --- --- 0.0100
2009 0.0100 --- --- --- --- 0:0000 ---
* HAP Emitted in ounds)
Five Year Violation History:None Hihest
Date Letter Twe Rule Violated Violation Resolution Date
Performed Stack Tests since last FCE:None
Date Test Results Test Method(s) Source(s)Tested
Mid-Atlantic Wood Products
June 24,2020
Page-2—
Type Action: _Full Compliance X Partial Compliance _Complaint Other:
Evaluation Evaluation/Reinspection Investigation
Data Date submitted for initial review 6/25/2020 _IBEAM WARNING/OE,NOD,NOV,NRE
Tracking: X IBEAM Document
X IBEAM Inspection,list date inspected. IBEAM LAT/LONG,Facility Locked
X IBEAM Inspection,list date draft is submitted X IBEAM LAT/LONG,Coordinates checked
X IBEAM Inspection,pollutants/programs checked _MEAM Complaint
IBEAM Planning,Next Inspection Date
Directions: From Taylorsville,drive West on Hwy. 64/90. At the intersection of Hwy. 64/90 and Hwy.
127,turn right onto All Healing Springs Road. Travel approximately one mile and turn right onto Zeb
Watts Road.Travel approximately one mile and turn right onto Dewey Elder Lane. The facility is located
at the end of Dewey Elder Lane. .
Safety Equipment: Safety glasses are required and steel toe shoes are recommended for an inspection at
this facility when conducting a site inspection. A site inspection was not made during this evaluation.
Safety Issues: A site inspection was not made.
Lat/Lonz Coordinates: A review of the "Facilities Regulated by Air Quality" on the DAQ website
indicates the facility's location is accurate and matches-the facility's latitude and longitude coordinates
listed in IBEAM. No changes to the latitude and longitude coordinates are needed in IBEAM.
Email Contacts:The facility email contacts were checked, and no updates were needed.
1. The purpose of this phone call was to conduct a partial air quality inspection without visiting the
site due to the ongoing corona virus pandemic. This facility manufactures wooden drawer and
cabinet parts. The facility employs 25 people. The facility is currently operating 6:00 am until
10:00pm, five days per week. Mr. Thad Carter, Plant Manager, spoke with me and provided me
records by email during this evaluation.
2. Facility Contact Information:
During the inspection, I,verified the facility contact information in IBEAM. Mr. Thad Carter is
still the contact for this facility and his information is correct.
3. Compliance history file review:
No problems have been noted in the last five years by DAQ,prior to this inspection. The current'
compliance status is discussed in the following sections.
Mid-Atlantic Wood Products
June 24,2020
Page -3 —
Summary of Conversation with Facility Contact
I talked with Mr. Thad Carter, Plant Manager, by phone on June 24, 2020 who said that his facility was
presently operating on the same schedule and do not expect to miss any maintenance that would have an
effect on air quality, due to the corona virus pandemic. The facility has to conduct an annual internal
inspection, for each 12-month period following the initial inspection, on their bagfilters and cyclone. Mr.
Carter provided me documentation by email showing that since the last internal inspection conducted on
June 25, 2018 we documented during an air quality inspection conducted on July 2, 2018, internal
inspections on the bagfilters and cyclone were performed on September 24, 2018, August 19, 2019,
November 11,2019,February 3,2020 and April 20, 2020.
Mr. Carter stated during the phone interview that his facility has not had any excess emissions. The facility
was issued an air permit on August 21,2015 due to expire on July 31, 2023.
I let the facility know that they could send reports or other official submissions correspondence to us
electronically at this time by either emailing me directly or by using the email account Dac.reports-
applicationslncderingov. I also let them know that if they send us an electronic application that they
would still need to follow up with a hard copy on a later date. The facility appears to be in compliance
with their recording and recordkeeping requirements based on this partial compliance evaluation.
Conclusion:
The facility appears to be in compliance with their recording, and recordkeeping requirements based on
this partial compliance evaluation.
SLS:lhe
c: MRO File
https://nccomect.shmpoint.com/sites/DAQ-MRO/Counties/ALEXANDER/00048/INSPECT_PCE_20200624.doex
f