AQ_F_1400092_20201209_CMPL_InspRpt (4)

-Alb
NORTH CAROLINA DIVISION OF Asheville Regional Office
AIR QUALITY McCreary Modern,Inc.-Upholstery Plant
NC Facility ID 1400092
Inspection Report County/FIPS: Caldwell/027
Date: 12/11/2020
Facility Data Permit Data
McCreary Modern,Inc. -Upholstery Plant Permit 05207/R13
2978 Rocky Road Issued 8/9/2017
Lenoir,NC 28645 Expires 7/31/2025
Lat: 35d 52.0320m Long: 8 1 d 35.8140m Class/Status Small
SIC: 2512/Upholstered Household Furniture Permit Status Active
NAICS: 337121 /Upholstered Household Furniture Manufacturing Current Permit Application(s)None
Contact Data Program Applicability
Facility Contact Authorized Contact Technical Contact SEP
Chris Warren Rick Coffey Mike Ridenhour
Plant Manager President Director of Engineering
[phone] [phone] [phone]
Compliance Data
Comments:
Inspection Date 12/09/2020
Inspector's Name Bob Graves
Inspector's Signature: Operating Status Operating
Compliance Code Compliance-inspection
Action Code FCE
Date of Signature: Z /1 'Z t On-Site Inspection Result Compliance
Total Actual emissions in TONS/YEAR:
TSP S02 NOX VOC CO PM10 *HAP
2016 0.4900 --- 24.64 --- 0.0500 2521.00
2011 0.4800 --- -- 28.40 0.0500 3494.00
* Highest HAP Emitted(inpounds)
Five Year Violation History:None
Date Letter Type Rule Violated Violation Resolution Date
Performed Stack Tests since last FCE:None
Date Test Results Test Method(s) Source(s)Tested

1)Location: McCreary Modem Inc. - Upholstery Plant is located at 2978 Rocky Road in
Lenoir,NC. Caldwell County.
Directions: From Morganton,take Hwy 18N to the Gamewell Community. The facility
is on the right at the corner of Morganton Blvd (Hwy 18) and Rocky Road.
2)Description: McCreary Modern Inc. -Upholstery Plant is a furniture finishing plant. This
facility is permitted under Air Permit No. 05207R13, effective from August 9, 2017,until July 1,
2025. Last compliance inspection conducted on November 19, 2019 by Richard Morris.
Current throughputs: 2020
Employees: 68
Hours: 40 hrs./wk., 50 wks./yr.
Permitted Sources are:
Emission Emission Source Control Control System
Source ID Description System ID Description
Lone furniture finishing operation including:
S13-1 through SB-8 eight dry filter-type spray booths N/A -- N/A
T-1 and T-2 two wash-off tanks N/A N/A
1 J� �
3)Inspection:
On December 9, 2020, I, Bob Graves with the NCDAQ drove to the facility. The facility was
in operation and I observed the facility's outside spray booth stacks. l did not observe any
visible emissions coming from the outside spray booth stacks. On December 10, 2020, I called
the facility's compliance contact, Chris Warren, Plant Manager. Based on my conversation
with him, we discussed the following:
a) Verified the contacts based on FACFINDER printout. The address has
changed to: 2978 Rocky Road, Lenoir NC 28645.
b) No changes have been made to the plant that would change the current air
permit.
c) I informed Mr. Warren that because of Covid-19 pandemic,NCDAQ is not
physically going inside buildings to conduct inspections,but are conducting
inspections to fulfill our compliance commitments. I requested he answer
some questions about production and record keeping, and he was glad to
answer my questions.
5) Inspection observations:
a) Spray booths, SB-1 thru SB-8: inside spray booths not observed. I did not
observe any visible emission emitting from the spray booth's outside stacks. Filters
are usually changed weekly.

Spray booths are labeled:
Booth# Application Type
1 operating Finish coating
2 operating Sealer coating
3 operating Sealer coating
4 not operating Glaze coating
5 operating Lacquer coating
6 operating Lacquer coating
7 operating Finish coating
8 operating Sealer/lacquer coating
b) Wash-off tanks: Not observed. One wash-off tank is onsite (the second tank has
not been installed). This tank is kept outside and covered, and is no longer being
used.
6) Stipulation Review:
A2 2D.0512—Particulate Control. In compliance. There are no wood working
operations that vent to the atmosphere at this site. All painting operations are
performed in dry-filter paint spray booths.
A.4 2D.0521 —Visible Emissions. In compliance. I did not observe any visible
emissions from the outside stacks.
A.6 2D.0540—Fugitive Dust Control In compliance. I did not observe any fugitive
dust emissions during my inspection.
A.7 2D.1806—Control and Prohibition of Odorous Emissions. In compliance. I did
not detect any odors during my inspection.
A.8 2Q. 0711 —TAP Emission Limit. Appears in compliance. Previous TAP
emission rates have been well-below TPER emission limits and anticipated
emission rates for these TAPs are expected to remain well-below applicable
limits.
A.10 2Q. 0803 —Exclusionary rule. Compliance Indicated. Last annual report
indicated compliance.
7) Reporting requirements: Annual report for summarizing emissions of VOC and HAPs is
required and must be submitted before March 1 annually. Last annual report was submitted
on 02/28/2020 and indicated compliance.
8) 112R Status:
Based on the facility's inventory, it was decided that they are not subject to 112R reporting
requirements.

9)Five Year Compliance History: No violations recorded in previous 5 years.
10) Comments and Compliance Statement:
Based on review of records and visual observations,this facility appeared to be operating in
compliance with the Air Quality standards and regulations at the time of this inspection.