AQ_F_1900039_20230921_EI_Cmb-EI-File_2022EI

2022 Emissions Inventory Review / Data Tracking Form
Facility Name: Southern Veneer Specialty Products, LLC - Moncure
Facility
Classification:
Title V

Assigned to:
Jeff Harris

Data Entry:

Chatham County
Confidential Copy Submitted?
 YES
 NO
 Enter date received into ED. Date Received: _________________
 Assigned to appropriate individual. Date Assigned: _________________ Date Due: __________________
 Paper copy submitted: One copy received with supporting documentation, certification form signed by responsible
official, and appears generally complete; OR
 Electronic copy submitted: All supporting documentation and certification form (with time/date stamp) signed by
responsible official has been received.
Comments:
Facility ID: 1900039
Initial Review / Data Entry
Inventory Review
 All forms and supporting documentation appear to be complete if paper submission (check ED OS data if electronic).
 Contact, address, phone number changes entered into I-Beam/Facilities if necessary.
 All known operating scenarios, control devices, and emission release points have been entered for each emission
source (permitted, insignificant, and unpermitted) or note that the emission source was not operated or not required to report.
 Check if SCC codes for each OS are accurate and update if needed.
 Evaluate "U" sources for significance and address according to policy.
 Calculations / forms appear to add up correctly.
 All compliance issues are being addressed (e.g. Toxics limits, above TV thresholds, large emissions
increase/decrease, installation without a permit).
 All volatile HAPs/TAPs were included in the VOC total.
 Calculations and control efficiencies appear correct. Emission factors are the best available and most current factors
appropriate for the reporting facility (e.g. stack testing, AP-42, etc.).
 Review facility comments and address any issues.
 Update ED (Data Entry Main) if additional information is required (corrections due date and date received).
 Check all ED QA/QC reports.
 Comparison with previous emission inventory must be made and outliers (> 10%) must be investigated and explained.
 Put inventory review comments and summarize any changes in ED - Data Entry Main "DAQ internal comments".
Date Review Complete: ___________________ Signature: _____________________________
Date Submitted to EI Coordinator: ___________________
Date Approved: ___________________ Initials: ___________________
Date Info Requested: ______________ Date Info Received: ______________ Total Days on Hold: ______
See details in notes. Emissions reductions correspond to reduced production.
09/21/2023
09/21/2023
09/21/2023
Southern Veneer Specialty Products, LLC - Moncure 03424T29
1900039
Facility Name:
Facility ID #:
Permit #(s):
Facility Total CY 2022 Emission Summary Recorded in ED
Pollutant CAS
Green House Gases Pollutants (GHG)Actual Emissions
Tons/Yr %
ChangeDemini-
mus
Not
Reported
Not
Reported
N/A
CO2 equivalent (sum of individual GHG pollutant emission
times their 1995 IPCC Global Warming Potential (GWP),
converted to metric tons)
No GHGs
Reported

Criteria Pollutants
CY 2022
from ED
CY 2021
from Fees
(Tons/Year)
Actual Emissions
%
ChangePollutantCASDemini-
mus
-7.5%29.0326.85CO 0.5CO
-9.5%41.2837.35NOx 0.5NOx
-17.6%57.4547.33TSP 0.5PM(TSP)
-17.6%57.1747.08PM10 0.5PM10
-17.4%52.5543.43PM2.5 0.5PM2.5
-7.7%0.6500000.600000SO2 0.5SO2
-10.4%106.3895.27VOC 0.5VOC
Hazardous Air Pollutants (HAPs)
and/or Toxic Air Pollutants (TAPs)
CY 2022
from ED
CY 2021
from Fees
(Pounds/Year)
Actual Emissions
%
ChangePollutantCASDemini-
mus
Arsenic & Compounds (total mass of elemental AS, arsine and
all inorganic compounds)
1.18 1.31 -9.9%0.01
-10.1%1.311.18ASC-Other 0.01Arsenic Unlisted Compounds - Specify Compound
(Component of ASC)
Cadmium & compounds (total mass includes elemental metal)1.74 1.93 -9.8%0.1
-10.1%1.931.747440-43-9 0.1Cadmium Metal, elemental, unreacted (Component of
CDC)
Chromium - All/Total (includes Chromium (VI) categories,
metal and others)
11.31 12.58 -10.1%0.1
-10.1%2.832.557738-94-5 0.01Chromic acid (VI) (Component of SolCR6 & CRC)
-10.1%9.758.76CRC-Other 0.1Chromium Unlisted Compounds - Specify Compound
(Component of CRC)
Page 1 of 409/21/2023
Southern Veneer Specialty Products, LLC - Moncure 03424T29
1900039
Facility Name:
Facility ID #:
Permit #(s):
Facility Total CY 2022 Emission Summary Recorded in ED
Hazardous Air Pollutants (HAPs)
and/or Toxic Air Pollutants (TAPs)
CY 2022
from ED
CY 2021
from Fees
(Pounds/Year)
Actual Emissions
%
ChangePollutantCASDemini-
mus
Chromium (VI) Soluble Chromate Compounds (Component of
CRC)
2.55 2.83 -9.9%0.01
-10.1%2.832.557738-94-5 0.01Chromic acid (VI) (Component of SolCR6 & CRC)
Cobalt & compounds 0.774140 0.861430 -10.1%1.0
-10.1%0.8614300.774140COC-Other 1.0Cobalt Unlisted Compounds - Specify Compound
(Component of COC)
Lead & compounds 5.62 6.26 -10.2%1.0
-10.1%6.265.62PBC-Other 10.0Lead Unlisted Compounds - Specify Compound
(Component of PBC)
Manganese & compounds 909.25 1,011.78 -10.1%10.0
-10.1%1,011.78909.25MNC-Other 10.0Manganese Unlisted Compounds - Specify Compound
(Component of MNC)
Mercury & Compounds - all total mass includes Hg Vapor 0.419940 0.467310 -10.1%0.001
-10.1%0.4673100.4199407439-97-6 0.001Mercury, vapor (Component of HGC)
Nickel & Compounds, sum total mass includes elemental 4.27 4.75 -10.1%1.0
-10.1%4.754.277440-02-0 1.0Nickel metal (Component of NIC)
Polycyclic Organic Matter (Specific Compounds from OAQPS
for TV)
2.98 3.31 -10.0%1.0
-9.8%3.312.9891-20-3 1.0Naphthalene (Component of 83329/POMTV)
-8.2%3,021.982,775.2375-07-0 10.0Acetaldehyde
-7.7%657.83607.20107-02-8 10.0Acrolein
-7.7%338.60312.6471-43-2 1.0Benzene
N/A1.04Not
Reported
56-23-5 1.0Carbon tetrachloride
-10.1%321.01288.487782-50-5 100.0Chlorine
-7.7%1,615.511,491.1898-82-8 100.0Cumene
-7.7%43.4340.0975-00-3 10.0Ethyl chloride (chloroethane)
-7.7%66.5661.43107-06-2 1.0Ethylene dichloride (1,2-dichloroethane)
Page 2 of 409/21/2023
Southern Veneer Specialty Products, LLC - Moncure 03424T29
1900039
Facility Name:
Facility ID #:
Permit #(s):
Facility Total CY 2022 Emission Summary Recorded in ED
Hazardous Air Pollutants (HAPs)
and/or Toxic Air Pollutants (TAPs)
CY 2022
from ED
CY 2021
from Fees
(Pounds/Year)
Actual Emissions
%
ChangePollutantCASDemini-
mus
-9.7%2,700.482,439.1850-00-0 10.0Formaldehyde
-10.1%140.59126.357647-01-0 100.0Hydrogen chloride (hydrochloric acid)
-25.9%47.9835.5478-93-3 100.0MEK (methyl ethyl ketone, 2-butanone)
-18.1%11,034.889,035.6867-56-1 1,000.0Methanol (methyl alcohol)
-7.7%63.7558.8474-83-9 1.0Methyl bromide (bromomethane)
-10.1%10.819.7174-87-3 1.0Methyl chloride (chloromethane)
N/A57.17Not
Reported
75-09-2 1.0Methylene chloride
-13.5%226.89196.27108-10-1 10.0MIBK (methyl isobutyl ketone)
-13.7%482.68416.52108-95-2 100.0Phenol
-10.1%2,214.531,990.127723-14-0 1.0Phosphorus Metal, Yellow or White
-9.9%9.068.16POM 1.0Polycyclic Organic Matter (Inc PAH, dioxins, etc. NC
& AP 42 historic)
N/A8.70Not
Reported
123-38-6 10.0Propionaldehyde
N/A0.001630Not
Reported
108-88-3 100.0Toluene
-7.7%121.89112.51120-82-1 100.0Trichlorobenzene, 1,2,4-
-7.7%41.9838.7575-01-4 0.1Vinyl chloride
-7.7%61.2356.5275-35-4 0.1Vinylidene chloride
28.7%180.91232.911330-20-7 100.0Xylene (mixed isomers)
Page 3 of 409/21/2023
Largest Individual HAP 9,035.68 lbs
21,235.33 lbsTotal HAP Emissions
Methanol (methyl alcohol)
Largest Individual CAP 95.27 tons
Total CAP Emissions 207.15 tons
Total TAP Emissions 8,564.09 lbs
Total Aggregate
Emissions
207.36 tons
VOC
DAQ's Comments Regarding Inventory
Page 4 of 409/21/2023
~18% reduction in PM results from similar decrease in throughput for OS21 Dry Waste Transfer and OS27
softwood Veneer dryers.
~10% reduction in VOC, Methanol, Phenol, Xylene results from similar decrease in throughput for OS26
softwood Veneer dryers and OS28 softwood glue mixing.
~10% reduction in Combustion products, (metals, chlorine, HCL, Methyl Chloride, MIBK results from similar
decrease in throughput forOS27 softwood Veneer dryers.

Facility Emissions - Operating Scenarios Per Pollutant
Southern Veneer Specialty Products, LLC - Moncure
2022 Inventory
Southern Veneer Specialty Products, LLC - Moncure
1900039 03424T29
Facility Name:
Facility ID:Permit Number(s):
Emission Rate - 2022OS ID Emission
Source ID
Pollutant
Emission Rate (Prev) - 2021
Acetaldehyde
OS-11 0.061740 Pounds 0.002680 Pounds
IES-19 IES-19
OS-18 482.88 Pounds 496.71 Pounds
ES20 ES20
OS-26 2,143.01 Pounds 2,321.69 Pounds
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
OS-28 149.24 Pounds 203.56 Pounds
ES13-GMO ES13-GMO
OS-37 0.037000 Pounds 0.011000 Pounds
IES-23 IES-23
OS-38 0.013110 Pounds
IES-GEN1
TOTAL in Current Inventory: 2,775.23 Pounds TOTAL in Previous Inventory: 3,021.98 Pounds
Acrolein
OS-11 0.007450 Pounds 0.000320 Pounds
IES-19 IES-19
OS-26 607.19 Pounds 657.81 Pounds
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
OS-37 0.004000 Pounds 0.001000 Pounds
IES-23 IES-23
9/21/2023 Page 1 of 15
Southern Veneer Specialty Products, LLC - Moncure
1900039 03424T29
Facility Name:
Facility ID:Permit Number(s):
Emission Rate - 2022OS ID Emission
Source ID
Pollutant
Emission Rate (Prev) - 2021
OS-38 0.013150 Pounds
IES-GEN1
TOTAL in Current Inventory: 607.20 Pounds TOTAL in Previous Inventory: 657.83 Pounds
Arsenic Unlisted Compounds - Specify Compound (Component of ASC)
OS-27 1.18 Pounds 1.31 Pounds
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
TOTAL in Current Inventory: 1.18 Pounds TOTAL in Previous Inventory: 1.31 Pounds
Benzene
OS-11 0.075110 Pounds 0.003270 Pounds
IES-19 IES-19
OS-26 312.52 Pounds 338.58 Pounds
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
OS-36 0.000430 Pounds 0.000140 Pounds
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
OS-37 0.045000 Pounds 0.013000 Pounds
IES-23 IES-23
OS-38 0.003280 Pounds
IES-GEN1
TOTAL in Current Inventory: 312.64 Pounds TOTAL in Previous Inventory: 338.60 Pounds
Cadmium Metal, elemental, unreacted (Component of CDC)
OS-27 1.74 Pounds 1.93 Pounds
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
9/21/2023 Page 2 of 15
Southern Veneer Specialty Products, LLC - Moncure
1900039 03424T29
Facility Name:
Facility ID:Permit Number(s):
Emission Rate - 2022OS ID Emission
Source ID
Pollutant
Emission Rate (Prev) - 2021
OS-36 0.000020 Pounds 0.000010 Pounds
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
TOTAL in Current Inventory: 1.74 Pounds TOTAL in Previous Inventory: 1.93 Pounds
Carbon tetrachloride
OS-27 1.04 Pounds
ES09
ES10
ES01-A
ES01-B
TOTAL in Previous Inventory: 1.04 Pounds
Chlorine
OS-27 288.48 Pounds 321.01 Pounds
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
TOTAL in Current Inventory: 288.48 Pounds TOTAL in Previous Inventory: 321.01 Pounds
Chromic acid (VI) (Component of SolCR6 & CRC)
OS-27 2.55 Pounds 2.83 Pounds
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
OS-36 0.000010 Pounds 0.000010 Pounds
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
TOTAL in Current Inventory: 2.55 Pounds TOTAL in Previous Inventory: 2.83 Pounds
Chromium Unlisted Compounds - Specify Compound (Component of CRC)
OS-27 8.76 Pounds 9.75 Pounds
9/21/2023 Page 3 of 15
Southern Veneer Specialty Products, LLC - Moncure
1900039 03424T29
Facility Name:
Facility ID:Permit Number(s):
Emission Rate - 2022OS ID Emission
Source ID
Pollutant
Emission Rate (Prev) - 2021
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
TOTAL in Current Inventory: 8.76 Pounds TOTAL in Previous Inventory: 9.75 Pounds
CO
OS-11 0.040000 Tons
IES-19 IES-19
OS-26 26.79 Tons 29.02 Tons
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
OS-37 0.020000 Tons 0.010000 Tons
IES-23 IES-23
TOTAL in Current Inventory: 26.85 Tons TOTAL in Previous Inventory: 29.03 Tons
Cobalt Unlisted Compounds - Specify Compound (Component of COC)
OS-27 0.774140 Pounds 0.861430 Pounds
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
TOTAL in Current Inventory: 0.77 Pounds TOTAL in Previous Inventory: 0.86 Pounds
Cumene
OS-26 1,491.18 Pounds 1,615.51 Pounds
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
TOTAL in Current Inventory: 1,491.18 Pounds TOTAL in Previous Inventory: 1,615.51 Pounds
Ethyl chloride (chloroethane)
OS-26 40.09 Pounds 43.43 Pounds
ES01-A ES01-A
ES01-B ES01-B
9/21/2023 Page 4 of 15
Southern Veneer Specialty Products, LLC - Moncure
1900039 03424T29
Facility Name:
Facility ID:Permit Number(s):
Emission Rate - 2022OS ID Emission
Source ID
Pollutant
Emission Rate (Prev) - 2021
ES09 ES09
ES10 ES10
TOTAL in Current Inventory: 40.09 Pounds TOTAL in Previous Inventory: 43.43 Pounds
Ethylene dichloride (1,2-dichloroethane)
OS-26 61.43 Pounds 66.56 Pounds
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
TOTAL in Current Inventory: 61.43 Pounds TOTAL in Previous Inventory: 66.56 Pounds
Formaldehyde
OS-11 0.094990 Pounds 0.004130 Pounds
IES-19 IES-19
OS-26 2,232.30 Pounds 2,418.43 Pounds
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
OS-28 206.71 Pounds 281.94 Pounds
ES13-GMO ES13-GMO
OS-36 0.015400 Pounds 0.005030 Pounds
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
OS-37 0.056000 Pounds 0.017000 Pounds
IES-23 IES-23
OS-38 0.093290 Pounds
IES-GEN1
TOTAL in Current Inventory: 2,439.18 Pounds TOTAL in Previous Inventory: 2,700.48 Pounds
Hydrogen chloride (hydrochloric acid)
OS-27 126.35 Pounds 140.59 Pounds
ES01-A ES01-A
ES01-B ES01-B
9/21/2023 Page 5 of 15
Southern Veneer Specialty Products, LLC - Moncure
1900039 03424T29
Facility Name:
Facility ID:Permit Number(s):
Emission Rate - 2022OS ID Emission
Source ID
Pollutant
Emission Rate (Prev) - 2021
ES09 ES09
ES10 ES10
TOTAL in Current Inventory: 126.35 Pounds TOTAL in Previous Inventory: 140.59 Pounds
Lead Unlisted Compounds - Specify Compound (Component of PBC)
OS-27 5.62 Pounds 6.26 Pounds
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
TOTAL in Current Inventory: 5.62 Pounds TOTAL in Previous Inventory: 6.26 Pounds
Manganese Unlisted Compounds - Specify Compound (Component of MNC)
OS-27 909.25 Pounds 1,011.78 Pounds
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
OS-36 0.000010 Pounds
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
TOTAL in Current Inventory: 909.25 Pounds TOTAL in Previous Inventory: 1,011.78 Pounds
MEK (methyl ethyl ketone, 2-butanone)
OS-27 1.97 Pounds 2.19 Pounds
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
OS-28 33.57 Pounds 45.79 Pounds
ES13-GMO ES13-GMO
TOTAL in Current Inventory: 35.54 Pounds TOTAL in Previous Inventory: 47.98 Pounds
Mercury, vapor (Component of HGC)
OS-27 0.419930 Pounds 0.467290 Pounds
ES01-A ES01-A
9/21/2023 Page 6 of 15
Southern Veneer Specialty Products, LLC - Moncure
1900039 03424T29
Facility Name:
Facility ID:Permit Number(s):
Emission Rate - 2022OS ID Emission
Source ID
Pollutant
Emission Rate (Prev) - 2021
ES01-B ES01-B
ES09 ES09
ES10 ES10
OS-36 0.000010 Pounds 0.000020 Pounds
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
TOTAL in Current Inventory: 0.42 Pounds TOTAL in Previous Inventory: 0.47 Pounds
Methanol (methyl alcohol)
OS-18 758.96 Pounds 780.69 Pounds
ES20 ES20
OS-26 3,687.76 Pounds 3,995.24 Pounds
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
OS-28 4,588.96 Pounds 6,258.96 Pounds
ES13-GMO ES13-GMO
TOTAL in Current Inventory: 9,035.68 Pounds TOTAL in Previous Inventory: 11,034.88 Pounds
Methyl bromide (bromomethane)
OS-26 58.84 Pounds 63.75 Pounds
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
TOTAL in Current Inventory: 58.84 Pounds TOTAL in Previous Inventory: 63.75 Pounds
Methyl chloride (chloromethane)
OS-27 9.71 Pounds 10.81 Pounds
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
TOTAL in Current Inventory: 9.71 Pounds TOTAL in Previous Inventory: 10.81 Pounds
9/21/2023 Page 7 of 15
Southern Veneer Specialty Products, LLC - Moncure
1900039 03424T29
Facility Name:
Facility ID:Permit Number(s):
Emission Rate - 2022OS ID Emission
Source ID
Pollutant
Emission Rate (Prev) - 2021
Methylene chloride
OS-26 57.17 Pounds
ES01-A
ES01-B
ES09
ES10
TOTAL in Previous Inventory: 57.17 Pounds
MIBK (methyl isobutyl ketone)
OS-27 162.50 Pounds 180.82 Pounds
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
OS-28 33.78 Pounds 46.07 Pounds
ES13-GMO ES13-GMO
TOTAL in Current Inventory: 196.27 Pounds TOTAL in Previous Inventory: 226.89 Pounds
Naphthalene (Component of 83329/POMTV)
OS-11 0.006830 Pounds 0.000300 Pounds
IES-19 IES-19
OS-27 2.97 Pounds 3.30 Pounds
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
OS-36 0.000130 Pounds 0.000040 Pounds
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
OS-37 0.004000 Pounds 0.001000 Pounds
IES-23 IES-23
OS-38 0.000160 Pounds
IES-GEN1
TOTAL in Current Inventory: 2.98 Pounds TOTAL in Previous Inventory: 3.31 Pounds
9/21/2023 Page 8 of 15
Southern Veneer Specialty Products, LLC - Moncure
1900039 03424T29
Facility Name:
Facility ID:Permit Number(s):
Emission Rate - 2022OS ID Emission
Source ID
Pollutant
Emission Rate (Prev) - 2021
Nickel metal (Component of NIC)
OS-27 4.27 Pounds 4.75 Pounds
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
OS-36 0.000040 Pounds 0.000010 Pounds
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
TOTAL in Current Inventory: 4.27 Pounds TOTAL in Previous Inventory: 4.75 Pounds
NOx
OS-11 0.180000 Tons 0.010000 Tons
IES-19 IES-19
OS-27 37.06 Tons 41.24 Tons
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
OS-37 0.110000 Tons 0.030000 Tons
IES-23 IES-23
TOTAL in Current Inventory: 37.35 Tons TOTAL in Previous Inventory: 41.28 Tons
Phenol
OS-26 304.49 Pounds 329.87 Pounds
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
OS-28 112.04 Pounds 152.81 Pounds
ES13-GMO ES13-GMO
TOTAL in Current Inventory: 416.52 Pounds TOTAL in Previous Inventory: 482.68 Pounds
Phosphorus Metal, Yellow or White
OS-27 1,990.12 Pounds 2,214.53 Pounds
9/21/2023 Page 9 of 15
Southern Veneer Specialty Products, LLC - Moncure
1900039 03424T29
Facility Name:
Facility ID:Permit Number(s):
Emission Rate - 2022OS ID Emission
Source ID
Pollutant
Emission Rate (Prev) - 2021
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
TOTAL in Current Inventory: 1,990.12 Pounds TOTAL in Previous Inventory: 2,214.53 Pounds
PM(TSP)
OS-2 0.010000 Tons 0.010000 Tons
I-1 I-1
OS-4 0.010000 Tons 0.010000 Tons
I-3 I-3
OS-8 0.240000 Tons 0.250000 Tons
I-8 I-8
OS-9 0.190000 Tons 0.220000 Tons
ES16 ES16
OS-11 0.010000 Tons
IES-19 IES-19
OS-17 0.190000 Tons 0.250000 Tons
ES12 ES12
OS-20 0.250000 Tons 0.280000 Tons
ES14 ES14
ES17 ES17
OS-21 13.64 Tons 18.61 Tons
ES03-SMS-1 ES03-SMS-1
OS-27 28.34 Tons 31.89 Tons
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
OS-28 4.13 Tons 5.64 Tons
ES13-GMO ES13-GMO
OS-32 0.310000 Tons 0.290000 Tons
I-10 I-10
I-9 I-9
9/21/2023 Page 10 of 15
Southern Veneer Specialty Products, LLC - Moncure
1900039 03424T29
Facility Name:
Facility ID:Permit Number(s):
Emission Rate - 2022OS ID Emission
Source ID
Pollutant
Emission Rate (Prev) - 2021
OS-37 0.010000 Tons
IES-23 IES-23
TOTAL in Current Inventory: 47.33 Tons TOTAL in Previous Inventory: 57.45 Tons
PM10
OS-4 0.010000 Tons 0.010000 Tons
I-3 I-3
OS-8 0.240000 Tons 0.250000 Tons
I-8 I-8
OS-9 0.090000 Tons 0.100000 Tons
ES16 ES16
OS-11 0.010000 Tons
IES-19 IES-19
OS-17 0.190000 Tons 0.250000 Tons
ES12 ES12
OS-20 0.110000 Tons 0.130000 Tons
ES14 ES14
ES17 ES17
OS-21 13.64 Tons 18.61 Tons
ES03-SMS-1 ES03-SMS-1
OS-27 28.34 Tons 31.89 Tons
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
OS-28 4.13 Tons 5.64 Tons
ES13-GMO ES13-GMO
OS-32 0.310000 Tons 0.290000 Tons
I-10 I-10
I-9 I-9
OS-37 0.010000 Tons
IES-23 IES-23
TOTAL in Current Inventory: 47.08 Tons TOTAL in Previous Inventory: 57.17 Tons
9/21/2023 Page 11 of 15
Southern Veneer Specialty Products, LLC - Moncure
1900039 03424T29
Facility Name:
Facility ID:Permit Number(s):
Emission Rate - 2022OS ID Emission
Source ID
Pollutant
Emission Rate (Prev) - 2021
PM2.5
OS-9 0.040000 Tons 0.040000 Tons
ES16 ES16
OS-11 0.010000 Tons
IES-19 IES-19
OS-17 0.190000 Tons 0.250000 Tons
ES12 ES12
OS-20 0.050000 Tons 0.050000 Tons
ES14 ES14
ES17 ES17
OS-21 13.64 Tons 18.61 Tons
ES03-SMS-1 ES03-SMS-1
OS-27 27.77 Tons 31.25 Tons
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
OS-28 1.72 Tons 2.35 Tons
ES13-GMO ES13-GMO
OS-37 0.010000 Tons
IES-23 IES-23
TOTAL in Current Inventory: 43.43 Tons TOTAL in Previous Inventory: 52.55 Tons
Polycyclic Organic Matter (Inc PAH, dioxins, etc. NC & AP 42 historic)
OS-11 0.013520 Pounds 0.000590 Pounds
IES-19 IES-19
OS-27 8.14 Pounds 9.06 Pounds
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
OS-36 0.000010 Pounds
ES01-A
ES01-B
ES09
9/21/2023 Page 12 of 15
Southern Veneer Specialty Products, LLC - Moncure
1900039 03424T29
Facility Name:
Facility ID:Permit Number(s):
Emission Rate - 2022OS ID Emission
Source ID
Pollutant
Emission Rate (Prev) - 2021
ES10
OS-37 0.008000 Pounds 0.002000 Pounds
IES-23 IES-23
TOTAL in Current Inventory: 8.16 Pounds TOTAL in Previous Inventory: 9.06 Pounds
Propionaldehyde
OS-27 8.70 Pounds
ES09
ES10
ES01-A
ES01-B
TOTAL in Previous Inventory: 8.70 Pounds
SO2
OS-11 0.010000 Tons
IES-19 IES-19
OS-27 0.580000 Tons 0.650000 Tons
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
OS-37 0.010000 Tons
IES-23 IES-23
TOTAL in Current Inventory: 0.60 Tons TOTAL in Previous Inventory: 0.65 Tons
Toluene
OS-38 0.001630 Pounds
IES-GEN1
TOTAL in Previous Inventory: 0.00 Pounds
Trichlorobenzene, 1,2,4-
OS-26 112.51 Pounds 121.89 Pounds
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
9/21/2023 Page 13 of 15
Southern Veneer Specialty Products, LLC - Moncure
1900039 03424T29
Facility Name:
Facility ID:Permit Number(s):
Emission Rate - 2022OS ID Emission
Source ID
Pollutant
Emission Rate (Prev) - 2021
TOTAL in Current Inventory: 112.51 Pounds TOTAL in Previous Inventory: 121.89 Pounds
Vinyl chloride
OS-26 38.75 Pounds 41.98 Pounds
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
TOTAL in Current Inventory: 38.75 Pounds TOTAL in Previous Inventory: 41.98 Pounds
Vinylidene chloride
OS-26 56.52 Pounds 61.23 Pounds
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
TOTAL in Current Inventory: 56.52 Pounds TOTAL in Previous Inventory: 61.23 Pounds
VOC
OS-5 0.120000 Tons 0.140000 Tons
I-4 I-4
I-5 I-5
OS-11 0.010000 Tons
IES-19 IES-19
OS-18 3.98 Tons 4.08 Tons
ES20 ES20
OS-26 79.02 Tons 85.61 Tons
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
OS-28 12.13 Tons 16.55 Tons
ES13-GMO ES13-GMO
OS-37 0.010000 Tons
IES-23 IES-23
TOTAL in Current Inventory: 95.27 Tons TOTAL in Previous Inventory: 106.38 Tons
9/21/2023 Page 14 of 15
Southern Veneer Specialty Products, LLC - Moncure
1900039 03424T29
Facility Name:
Facility ID:Permit Number(s):
Emission Rate - 2022OS ID Emission
Source ID
Pollutant
Emission Rate (Prev) - 2021
Xylene (mixed isomers)
OS-11 0.022940 Pounds 0.001000 Pounds
IES-19 IES-19
OS-26 232.87 Pounds 180.90 Pounds
ES01-A ES01-A
ES01-B ES01-B
ES09 ES09
ES10 ES10
OS-37 0.014000 Pounds 0.004000 Pounds
IES-23 IES-23
OS-38 0.000450 Pounds
IES-GEN1
TOTAL in Current Inventory: 232.91 Pounds TOTAL in Previous Inventory: 180.91 Pounds
9/21/2023 Page 15 of 15
1900039 Chatham,Southern Veneer, Moncure
ID Group OS Name 2021 2022 Units Ratio Notes
ES-09, ES-10, ES01-A, ES-01B 24 26 Veneer Dryers Softwood lb/sf 96,737,000 89,292,000 sqf 0.92
24 27 Veneer Dryers Softwood lb/MMBTU 406,336 365,160 mmbtu 0.90
24 30 Veneer Dryers Hardwood lb/sf sqf DNO
24 31 Veneer Dryers Hardwood lb/MMBTU mmbtu DNO
24 36 NG Startup burner 0.67 0.21 MMCF 0.31
I-4, I-5 25 35 Ink & Painting 170 160 gal 0.94
ES14,17,18 27 20 Woodwaste Transfer (Rechipper)23,195 20,715 tons 0.89
I-9, 10 2 32 Green Veneer Stackers 82,422 89,292 tons 1.08
ES03-SMS-1 21 String machine including saws Dry Waste Transfer 56,387,000 41,342,000 sqf 0.73
ES12 17 Dry wood residual storage silo 54,170,430 41,342,000 sqf 0.76
ES13-GMO 10 Glue mixing application and Hot Press Hardwood sqf DNO
ES13-GMO 28 Glue mixing application and Hot Press Softwood 56,387,000 41,342,000 sqf 0.73
ES16 9 Dry hog 18,648 16,131 tons 0.87
ES20 18 Vat operations 106,361,000 103,401,000 sqf 0.97
I - 1 2 Bark hogging operations with two saws 16,327 13,140 tons 0.80
I-11 25 Hammer hog truck dump 1,452 1,240 tons 0.85
I-12 24 Dry waste truck dump 1,105 1,006 tons 0.91
I - 2 3 Tree Core chipping and handling 1,423 1,233 tons 0.87
I - 3 4 Green veneer hogging 21,772 19,482 tons 0.89
I - 8 8 Veneer diverter exhaust cyclone 71,432 69,348 tons 0.97
IES-19 11 Diesel-fired water pump (250 Horsepower 3.5 80.5 mmbtu 23.00
I E S - 1 9 35 Diesel-fired water pump (250 Horsepower DNO
I E S - 2 3 37 Diesel-fired water pump (190 Horsepower 14 47.9 mmbtu 3.40
IES-GEN1 38 Propane-fired emergency generator 1.7 mmbtu 0.00 DNO
IES-GWS 16 Green wood fuel storage silo 16,327 13,140 tons 0.80
ES-13-40HP 40 panel hot press DNO
ES-13-CC Curtain coater DNO
ES03-CC Core composer with saw DNO
ES03-CS Core saw (green or dry veneer)DNO
ES03-PSS Panel sawing system DNO
ES03-SS Wedge saw DNO
ES04 12 Wood sander DNO
I - 6 6 Plywood surface patching DNO
I - 7 7 Maintenance parts washers DNO
IES-13-PS1 and IES-13-PS2 Two plywood spreaders DNO

Listing of Emission Sources and Control Devices on Permit. See instructions

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
*ES ID on
Air Permit
*ES Description *CS ID *CS Description * CD ID's
ES-13-40HP 40 panel hot press
ES-13-CC Curtain coater
ES01-A
Fluidized bed wood burner with
blending chamber and dedicated
overfire air fan (80.0 million Btu/hr
heat input capacity)
CS-1 multicyclone CD02
ES01-B
Boiler (29.79 million Btu/hr heat
input capacity, based on slipstream
gas from ID No. ES-01-A) [NSPS
Subpart Dc]
CS-1 multicyclone CD02
ES03-CC Core composer with saw
ES03-CS Core saw (green or dry veneer)
ES03-PSS Panel sawing system
ES03-SMS-1 String machine including saws CS-3 bagfilter (7,095 square feet of filter area), dry
waste transfer cyclone
CD03-WWTC,
CD06
ES03-SS Wedge saw
ES04 Wood sander CS-10
Bagfilter (6,200 square feet of filter
area),Woodwaste transfer cyclone (154 inches
in diameter),Bagfilter (7,095 square feet of
filter area),
CD05, CD03-
WWTC, CD06
ES09 Direct wood-fired veneer dryer M72 CS-1 multicyclone CD02
ES10 Direct wood-fired veneer dryer M72 CS-1 multicyclone CD02
ES12 Dry wood residual storage silo CS-5 cartridge filter (1,800 square feet of filter area) CD21
ES13-GMO
Glue mixing operations consisting of
two resin storage tanks and four
mixed glue tanks

ES14 Rechip blow hog (green wood only) CS-12
Cyclone (60 inches in diameter),Woodwaste
transfer cyclone (154 inches in
diameter),Bagfilter (7,095 square feet of filter
area),
CD18, CD03-
WWTC, CD06
ES16 Dry hog CS-3 bagfilter (7,095 square feet of filter area), dry
waste transfer cyclone
CD03-WWTC,
CD06
ES17 Green wood sizing operations
including sizing screens and bins CS-12
Cyclone (60 inches in diameter),Woodwaste
transfer cyclone (154 inches in
diameter),Bagfilter (7,095 square feet of filter
area),
CD18, CD03-
WWTC, CD06
ES20 Vat operations
I-1 Bark hogging operations with two
saws
I-10 One green wood veneer stacker No. 2
I-11 Hammer hog truck dump
I-12 Dry waste truck dump
2

I-2 Tree Core chipping and handling
I-3 Green veneer hogging
I-4 Logo painting and ink marking
I-5 Logo painting and ink marking
I-6 Plywood surface patching
I-7 Maintenance parts washers
I-8 Veneer diverter exhaust cyclone
I-9 One green wood veneer stacker No. 1
IES-13-PS1 Plywood spreader
IES-13-PS2 Plywood spreader
IES-19
Diesel-fired water pump (250
Horsepower maximum power output)
for emergency purposes only[GACT
ZZZZ]

IES-23
Diesel-fired fire pump emergency
engine (190 horsepower maximum
power output) [GACT ZZZZ, NSPS
IIII]

IES-GEN1
Propane-fired emergency generator
(17 kilowatts) [NSPS IIII, GACT
ZZZZ]

IES-GWS Green wood fuel storage silo

3

Emission Source & Operating Scenario List - See Instructions

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
*ES Group ID *ES ID *OS ID *OS Description
GR2 I-10, I-9 32 Green Veneer Stackers
G-24 ES01-A, ES01-B, ES09,
ES10
26 Veneer dryers and heat source (wood
burner) lbs/SF, (Softwood)
27 Veneer dryers and heat source (wood
burner) HAPS lb/mmBtu, (Softwood)
30 Veneer dryers and heat source (wood
burner) lbs/SF, (Hardwood)
31 Veneer dryers and heat source (wood
burner) HAPS lb/mmBtu, (Hardwood)
36 Natural Gas start up burner (1 MMBtu/hr)
G-25 I-4, I-5 5 Ink and painting operations
G-27 ES14, ES17 20 Woodwaste Transfer (Rechipper) system
ES-13-40HP NONE NONE
ES-13-CC NONE NONE
ES03-CC NONE NONE
ES03-CS NONE NONE
ES03-PSS NONE NONE
ES03-SMS-1 21 Dry Waste transfer system
ES03-SS NONE NONE
ES04 12 wood sander
ES12 17 dry wood residual storage silo
ES13-GMO
10 glue mixing, application and hot presses
operations (Hardwood)
28 glue mixing, application and hot presses
operations, (softwood)
ES16 9 plywood hog
ES20 18 Vat Operations: Heating of Blocks
I-1 2 Bark hogging operations
I-11 25 Hammer hog truck dump - no controls
I-12 24 Dry Waste truck dump
I-2 3 Core chipping and handling operations
I-3 4 Green veneer hogging operations
I-6 6 Plywood surface patching
I-7 7 Maintenance parts washer
I-8 8 Veneer diverter exhaust cyclone
IES-13-PS1 NONE NONE
IES-13-PS2 NONE NONE
IES-19 11 250 horsepower diesel-fired water pump
IES-23 37 190 HP Diesel-Fired Water Pump #2
4
IES-GEN1 38 Propane-fired emergency generator (17
kilowatts)
IES-GWS 16 Green wood fuel storage silo

5

8. Control Device Information :None

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
Group GR2 consisting of I-10, I-9
2. Emission Source Description :Green Veneer Stackers
3. Operating Scenario ID/
    Description:
OS - 32/Green Veneer Stackers
4. SCC Number/Description:30700799/Plywood Operations ; Other Not Classified

5. Throughput/units in 2022:
(e.g. production or fuel use):
89292 TON/yr
6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):

Order CS-ID CD ID
(as listed in permit)
Control Device Description

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
EP-
Fug4
FUGITIVE (NO
STACK) 1 72 Area = 1 Stackers

6

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 32 Emission Source/Group ID: GR2
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08
NOx NOx 08
TSP TSP 0.31 02
PM10 PM10 0.31 02
PM2.5 PM2.5 08
SO2 SO2 08
VOC VOC 08
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

7

8. Control Device Information :

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
Group G-24 consisting of ES01-A, ES01-B, ES09, ES10
2. Emission Source Description :Veneer dryers and heat source (wood burner)
3. Operating Scenario ID/
    Description:
OS - 26/Veneer dryers and heat source (wood burner) lbs/SF, (Softwood)
4. SCC Number/Description:30700740/Plywood Operations ; Direct Wood-Fired Dryer: Non-specified
Pine Species Veneer

5. Throughput/units in 2022:
(e.g. production or fuel use):
89292000 FT2/yr
6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):
100
Order CS-ID CD ID
(as listed in permit)
Control Device Description
1 CS-1 CD02 Multicyclone (720 six-inch diameter tubes)

8

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

Operating Scenario: OS - 26 Emission Source/Group ID: G-24
ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
09A VERTICAL
STACK 66 1 350 155 7304.2 Veneer dryer erp
10cool VERTICAL
STACK 46 4 105 35 26389.37 Veneer dryer erp
09C VERTICAL
STACK 66 1 340 150 7068.58 Veneer dryer erp
10B VERTICAL
STACK 66 1 370 100 4712.38 Veneer dryer erp
10A VERTICAL
STACK 66 1 350 155 7304.2 Veneer dryer erp
10C VERTICAL
STACK 66 1 340 150 7068.58 Veneer dryer erp
10coolA VERTICAL
STACK 46 4 105 35 26389.37 Veneer dryer erp
09cool VERTICAL
STACK 46 4 107 35 26389.37 Veneer dryer erp
09coolA VERTICAL
STACK 46 4 107 35 26389.37 Veneer dryer erp
09B VERTICAL
STACK 66 1 370 100 4712.38 Veneer dryer erp

9

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 26 Emission Source/Group ID: G-24
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 26.79 04 0 0.0006 AFTER
NOx NOx 08 0
TSP TSP 08 65
PM10 PM10 08 65
PM2.5 PM2.5 08 65
SO2 SO2 08 0
VOC VOC 79.02 08 0 0.00177 AFTER
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022
Acetaldehyde 75-07-0 2143.008 10 0 0.000024 AFTER
Acrolein 107-02-8 607.1856 10 0 0.0000068 AFTER
Benzene 71-43-2 312.522 10 0 0.0000035 AFTER
Cumene 98-82-8 1491.1764 10 0 0.0000167 AFTER
Ethyl chloride
(chloroethane)75-00-3 40.09211 10 0 4.49E-7 AFTER
Ethylene dichloride (1,2-
dichloroethane)107-06-2 61.4329 10 0 6.88E-7 AFTER
Formaldehyde 50-00-0 2232.3 04 0 0.000025 AFTER
Methanol 67-56-1 3687.7596 10 0 0.0000413 AFTER
Methyl bromide 74-83-9 58.84343 10 0 6.59E-7 AFTER
Phenol 108-95-2 304.48572 10 0 0.00000341 AFTER
Trichlorobenzene, 1,2,4-120-82-1 112.50792 10 0 0.00000126 AFTER
Vinyl chloride 75-01-4 38.75273 10 0 4.34E-7 AFTER
Vinylidene chloride 75-35-4 56.52184 10 0 6.33E-7 AFTER
Xylene 1330-20-7 232.87354 10 0 0.00000260
8 AFTER

10

11

8. Control Device Information :

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
Group G-24 consisting of ES01-A, ES01-B, ES09, ES10
2. Emission Source Description :Veneer dryers and heat source (wood burner)
3. Operating Scenario ID/
    Description:
OS - 27/Veneer dryers and heat source (wood burner) HAPS lb/mmBtu,
(Softwood)
4. SCC Number/Description:30700740/Plywood Operations ; Direct Wood-Fired Dryer: Non-specified
Pine Species Veneer

5. Throughput/units in 2022:
(e.g. production or fuel use):
365160 E6BTU/yr
6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):
100
Order CS-ID CD ID
(as listed in permit)
Control Device Description
1 CS-1 CD02 Multicyclone (720 six-inch diameter tubes)

12

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

Operating Scenario: OS - 27 Emission Source/Group ID: G-24
ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
09A VERTICAL
STACK 66 1 350 155 7304.2 Veneer dryer erp
10cool VERTICAL
STACK 46 4 105 35 26389.37 Veneer dryer erp
09C VERTICAL
STACK 66 1 340 150 7068.58 Veneer dryer erp
10B VERTICAL
STACK 66 1 370 100 4712.38 Veneer dryer erp
10A VERTICAL
STACK 66 1 350 155 7304.2 Veneer dryer erp
10C VERTICAL
STACK 66 1 340 150 7068.58 Veneer dryer erp
10coolA VERTICAL
STACK 46 4 105 35 26389.37 Veneer dryer erp
09cool VERTICAL
STACK 46 4 107 35 26389.37 Veneer dryer erp
09coolA VERTICAL
STACK 46 4 107 35 26389.37 Veneer dryer erp
09B VERTICAL
STACK 66 1 370 100 4712.38 Veneer dryer erp

13

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 27 Emission Source/Group ID: G-24
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08 0
NOx NOx 37.06 10 0 0.203
TSP TSP 28.34 04 65 AFTER
PM10 PM10 28.34 04 65 AFTER
PM2.5 PM2.5 27.77 04 65 AFTER
SO2 SO2 0.58 10 0 0.00318 AFTER
VOC VOC 08 0
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022
Arsenic Unlisted
Compounds ( Specify &
Component of ASC)
ASC-Other 1.17582 10 0 0.00000322 AFTER
Cadmium Metal
(elemental unreacted,
Component of CDC)
7440-43-9 1.73816 10 0 0.00000476 AFTER
Chlorine 7782-50-5 288.4764 10 0 0.00079 AFTER
Chromic acid (VI)
(Component of SolCR6 &
CRC)
7738-94-5 2.54517 10 0 0.00000697 AFTER
Chromium Unlisted
Compounds (Specify &
Component of CRC)
CRC-
Other 8.76384 10 0 0.000024 AFTER
Cobalt Unlisted
Compound (Specify &
Component of COC)
COC-
Other 0.77414 10 0 0.00000212 AFTER
Hydrogen chloride
(hydrochloric acid)7647-01-0 126.34536 10 0 0.000346 AFTER
14

Lead Unlisted Compounds
(Specify and Component
of PBC)
PBC-Other 5.62346 10 0 0.0000154 AFTER
Manganese Unlisted
Compounds (Specify &
Component of MNC)
MNC-
Other 909.2484 10 0 0.00249 AFTER
Mercury, vapor
(Component of HGC)7439-97-6 0.41993 10 0 0.00000115 AFTER
Methyl chloride 74-87-3 9.71326 10 0 0.0000266 AFTER
Methyl ethyl ketone 78-93-3 1.96821 10 0 0.00000539 AFTER
Methyl isobutyl ketone 108-10-1 162.4962 10 0 0.000445 AFTER
Naphthalene (Component
of POMTV)91-20-3 2.96875 10 0 0.00000813 AFTER
Nickel metal (Component
of NIC)7440-02-0 4.27237 10 0 0.0000117 AFTER
Phosphorus Metal, Yellow
or White 7723-14-0 1990.122 10 0 0.00545 AFTER
Polycyclic Organic Matter
(Inc PAH, dioxins, etc. NC
& AP 42 historic
amorphous glob)
POM 8.14307 10 0 0.0000223 AFTER

15

8. Control Device Information :

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
Group G-24 consisting of ES01-A, ES01-B, ES09, ES10
2. Emission Source Description :Veneer dryers and heat source (wood burner)
3. Operating Scenario ID/
    Description:
OS - 30/Veneer dryers and heat source (wood burner) lbs/SF,
(Hardwood)
4. SCC Number/Description:30700734/Plywood Operations ; Hardwood Plywood, Veneer Dryer Direct
Wood-fired, Heated Zones

5. Throughput/units in 2022:
(e.g. production or fuel use):

6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):
100
Order CS-ID CD ID
(as listed in permit)
Control Device Description
1 CS-1 CD02 Multicyclone (720 six-inch diameter tubes)

16

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

Operating Scenario: OS - 30 Emission Source/Group ID: G-24
ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
09A VERTICAL
STACK 66 1 350 155 7304.2 Veneer dryer erp
10cool VERTICAL
STACK 46 4 105 35 26389.37 Veneer dryer erp
09C VERTICAL
STACK 66 1 340 150 7068.58 Veneer dryer erp
10B VERTICAL
STACK 66 1 370 100 4712.38 Veneer dryer erp
10A VERTICAL
STACK 66 1 350 155 7304.2 Veneer dryer erp
10C VERTICAL
STACK 66 1 340 150 7068.58 Veneer dryer erp
10coolA VERTICAL
STACK 46 4 105 35 26389.37 Veneer dryer erp
09cool VERTICAL
STACK 46 4 107 35 26389.37 Veneer dryer erp
09coolA VERTICAL
STACK 46 4 107 35 26389.37 Veneer dryer erp
09B VERTICAL
STACK 66 1 370 100 4712.38 Veneer dryer erp

17

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 30 Emission Source/Group ID: G-24
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08
NOx NOx 08
TSP TSP 08
PM10 PM10 08
PM2.5 PM2.5 08
SO2 SO2 08
VOC VOC 08
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

18

8. Control Device Information :

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
Group G-24 consisting of ES01-A, ES01-B, ES09, ES10
2. Emission Source Description :Veneer dryers and heat source (wood burner)
3. Operating Scenario ID/
    Description:
OS - 31/Veneer dryers and heat source (wood burner) HAPS lb/mmBtu,
(Hardwood)
4. SCC Number/Description:30700740/Plywood Operations ; Direct Wood-Fired Dryer: Non-specified
Pine Species Veneer

5. Throughput/units in 2022:
(e.g. production or fuel use):

6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):
100
Order CS-ID CD ID
(as listed in permit)
Control Device Description
1 CS-1 CD02 Multicyclone (720 six-inch diameter tubes)

19

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

Operating Scenario: OS - 31 Emission Source/Group ID: G-24
ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
09A VERTICAL
STACK 66 1 350 155 7304.2 Veneer dryer erp
10cool VERTICAL
STACK 46 4 105 35 26389.37 Veneer dryer erp
09C VERTICAL
STACK 66 1 340 150 7068.58 Veneer dryer erp
10B VERTICAL
STACK 66 1 370 100 4712.38 Veneer dryer erp
10A VERTICAL
STACK 66 1 350 155 7304.2 Veneer dryer erp
10C VERTICAL
STACK 66 1 340 150 7068.58 Veneer dryer erp
10coolA VERTICAL
STACK 46 4 105 35 26389.37 Veneer dryer erp
09cool VERTICAL
STACK 46 4 107 35 26389.37 Veneer dryer erp
09coolA VERTICAL
STACK 46 4 107 35 26389.37 Veneer dryer erp
09B VERTICAL
STACK 66 1 370 100 4712.38 Veneer dryer erp

20

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 31 Emission Source/Group ID: G-24
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08
NOx NOx 08
TSP TSP 08
PM10 PM10 08
PM2.5 PM2.5 08
SO2 SO2 08
VOC VOC 08
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

21

8. Control Device Information :

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
Group G-24 consisting of ES01-A, ES01-B, ES09, ES10
2. Emission Source Description :Veneer dryers and heat source (wood burner)
3. Operating Scenario ID/
    Description:
OS - 36/Natural Gas start up burner (1 MMBtu/hr)
4. SCC Number/Description:30701399/Paper - Miscellaneous Processes ; Other Not Classified

5. Throughput/units in 2022:
(e.g. production or fuel use):
0.207 E6FT3/yr
6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):
100
Order CS-ID CD ID
(as listed in permit)
Control Device Description
1 CS-1 CD02 Multicyclone (720 six-inch diameter tubes)

22

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

Operating Scenario: OS - 36 Emission Source/Group ID: G-24
ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
09A VERTICAL
STACK 66 1 350 155 7304.2 Veneer dryer erp
10cool VERTICAL
STACK 46 4 105 35 26389.37 Veneer dryer erp
09C VERTICAL
STACK 66 1 340 150 7068.58 Veneer dryer erp
10B VERTICAL
STACK 66 1 370 100 4712.38 Veneer dryer erp
10A VERTICAL
STACK 66 1 350 155 7304.2 Veneer dryer erp
10C VERTICAL
STACK 66 1 340 150 7068.58 Veneer dryer erp
10coolA VERTICAL
STACK 46 4 105 35 26389.37 Veneer dryer erp
09cool VERTICAL
STACK 46 4 107 35 26389.37 Veneer dryer erp
09coolA VERTICAL
STACK 46 4 107 35 26389.37 Veneer dryer erp
09B VERTICAL
STACK 66 1 370 100 4712.38 Veneer dryer erp

23

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 36 Emission Source/Group ID: G-24
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08 0
NOx NOx 08 0
TSP TSP 08 65
PM10 PM10 08 65
PM2.5 PM2.5 08 65
SO2 SO2 08 0
VOC VOC 08 0
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022
Benzene 71-43-2 0.00043 08 0
Cadmium Metal
(elemental unreacted,
Component of CDC)
7440-43-9 0.00002 08 0
Chromic acid (VI)
(Component of SolCR6 &
CRC)
7738-94-5 0.00001 08 0
Formaldehyde 50-00-0 0.0154 08 0
Manganese Unlisted
Compounds (Specify &
Component of MNC)
MNC-
Other 0.00001 08 0
Mercury, vapor
(Component of HGC)7439-97-6 0.00001 08 0
Naphthalene (Component
of POMTV)91-20-3 0.00013 08 0
Nickel metal (Component
of NIC)7440-02-0 0.00004 08 0
24

Polycyclic Organic Matter
(Inc PAH, dioxins, etc. NC
& AP 42 historic
amorphous glob)
POM 0 08 0

25

8. Control Device Information :None

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
Group G-25 consisting of I-4, I-5
2. Emission Source Description :Ink and painting operations
3. Operating Scenario ID/
    Description:
OS - 5/Ink and painting operations
4. SCC Number/Description:40500597/Printing - General ; Other Not Classified

5. Throughput/units in 2022:
(e.g. production or fuel use):
160 GAL/yr
6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):

Order CS-ID CD ID
(as listed in permit)
Control Device Description

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
EP-FUG FUGITIVE (NO
STACK) 1 72 Area = 1 ERP for Fugitive
sources

26

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 5 Emission Source/Group ID: G-25
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08
NOx NOx 08
TSP TSP 08
PM10 PM10 08
PM2.5 PM2.5 08
SO2 SO2 08
VOC VOC 0.12 03
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

27

8. Control Device Information :

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
Group G-27 consisting of ES14, ES17
2. Emission Source Description :Woodwaste Transfer system
3. Operating Scenario ID/
    Description:
OS - 20/Woodwaste Transfer (Rechipper) system
4. SCC Number/Description:30700799/Plywood Operations ; Other Not Classified

5. Throughput/units in 2022:
(e.g. production or fuel use):
20715 TON/yr
6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):
100
Order CS-ID CD ID
(as listed in permit)
Control Device Description
1 CS-12 CD18 Cyclone (60 inches in diameter)
2 CS-12 CD03-WWTC Woodwaste transfer cyclone (154 inches in diameter)
3 CS-12 CD06 Bagfilter (7,095 square feet of filter area)

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
erp-08 VERTICAL
STACK 51 3.5 80 55 31749.72
erp for dry waste
transfer cyclone
and bagfilter

28

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 20 Emission Source/Group ID: G-27
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08 0
NOx NOx 08 0
TSP TSP 0.25 08 99.7 0.024 AFTER
PM10 PM10 0.11 08 99.7 0.011 AFTER
PM2.5 PM2.5 0.05 08 99.7 0.0046 AFTER
SO2 SO2 08 0
VOC VOC 08 0
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

29

8. Control Device Information :

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
ES03-SMS-1
2. Emission Source Description :Woodworking operations consisting of three string machine saws, a core
saw, a strip saw, a panel sawing system and a core composer, saw,
sander baghouse (ID No. CD-05)
3. Operating Scenario ID/
    Description:
OS - 21/Dry Waste transfer system
4. SCC Number/Description:30700710/Plywood Operations ; Sawing

5. Throughput/units in 2022:
(e.g. production or fuel use):
41342000 FT2/yr
6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):
100
Order CS-ID CD ID
(as listed in permit)
Control Device Description
1 CS-3 CD03-WWTC Woodwaste transfer cyclone (154 inches in diameter)
2 CS-3 CD06 Bagfilter (7,095 square feet of filter area)

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
erp-08 VERTICAL
STACK 51 3.5 80 55 31749.72
erp for dry waste
transfer cyclone
and bagfilter

30

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 21 Emission Source/Group ID: ES03-
SMS-1
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08 0
NOx NOx 08 0
TSP TSP 13.64 10 85 AFTER
PM10 PM10 13.64 10 85 AFTER
PM2.5 PM2.5 13.64 10 0 AFTER
SO2 SO2 08 0
VOC VOC 08 0
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

31

8. Control Device Information :

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
ES04
2. Emission Source Description :wood sander
3. Operating Scenario ID/
    Description:
OS - 12/wood sander
4. SCC Number/Description:30700702/Plywood Operations ; Sanding Operations

5. Throughput/units in 2022:
(e.g. production or fuel use):

6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):
100
Order CS-ID CD ID
(as listed in permit)
Control Device Description
1 CS-10 CD05 Bagfilter (6,200 square feet of filter area)
2 CS-10 CD03-WWTC Woodwaste transfer cyclone (154 inches in diameter)
3 CS-10 CD06 Bagfilter (7,095 square feet of filter area)

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
EP-WS DOWNWARD-
FACING VENT 10 1 72 1 47.12 ERP for wood
sander

32

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 12 Emission Source/Group ID: ES04
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08
NOx NOx 08
TSP TSP 08
PM10 PM10 08
PM2.5 PM2.5 08
SO2 SO2 08
VOC VOC 08
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

33

8. Control Device Information :

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
ES12
2. Emission Source Description :dry wood residual storage silo that receives material from the dry wood
residual system cyclone ES03
3. Operating Scenario ID/
    Description:
OS - 17/dry wood residual storage silo
4. SCC Number/Description:30700799/Plywood Operations ; Other Not Classified

5. Throughput/units in 2022:
(e.g. production or fuel use):
41342000 FT2/yr
6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):
100
Order CS-ID CD ID
(as listed in permit)
Control Device Description
1 CS-5 CD21 Cartridge filter (1,800 square feet of filter area)

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
ep-12 VERTICAL
STACK 60 0.7 72 0.45 10.39 silo erp

34

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 17 Emission Source/Group ID: ES12
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08 0
NOx NOx 08 0
TSP TSP 0.19 10 99.9 0.00000929 AFTER
PM10 PM10 0.19 10 99.9 0.00000929 AFTER
PM2.5 PM2.5 0.19 10 99.9 0.00000929 AFTER
SO2 SO2 08 0
VOC VOC 08 0
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

35

8. Control Device Information :None

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
ES13-GMO
2. Emission Source Description :glue mixing, application and hot press operations, including curtain
coater, plywood spreader, 25 press and 40 press and paper overlay
operation
3. Operating Scenario ID/
    Description:
OS - 10/glue mixing, application and hot presses operations (Hardwood)
4. SCC Number/Description:30700780/Plywood Operations ; Plywood Press: Phenol-formaldehyde Resin

5. Throughput/units in 2022:
(e.g. production or fuel use):

6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):

Order CS-ID CD ID
(as listed in permit)
Control Device Description

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
erp-13 FUGITIVE (NO
STACK) 3.05 125 Area =erp for gluing and
press operations

36

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 10 Emission Source/Group ID: ES13-
GMO
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08
NOx NOx 08
TSP TSP 08
PM10 PM10 08
PM2.5 PM2.5 08
SO2 SO2 08
VOC VOC 08
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

37

8. Control Device Information :None

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
ES13-GMO
2. Emission Source Description :glue mixing, application and hot press operations, including curtain
coater, plywood spreader, 25 press and 40 press and paper overlay
operation
3. Operating Scenario ID/
    Description:
OS - 28/glue mixing, application and hot presses operations, (softwood)
4. SCC Number/Description:30700799/Plywood Operations ; Other Not Classified

5. Throughput/units in 2022:
(e.g. production or fuel use):
41342000 FT2/yr
6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):

Order CS-ID CD ID
(as listed in permit)
Control Device Description

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
erp-13 FUGITIVE (NO
STACK) 3.05 125 Area =erp for gluing and
press operations

38

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 28 Emission Source/Group ID: ES13-
GMO
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08
NOx NOx 08
TSP TSP 4.13 10 0.0002
PM10 PM10 4.13 10 0.0002
PM2.5 PM2.5 1.72 10 0.0000832
SO2 SO2 08
VOC VOC 12.13 04 0.000587
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022
Acetaldehyde 75-07-0 149.24462 10 0.00000361
Formaldehyde 50-00-0 206.71 04 0.000005
Methanol 67-56-1 4588.962 04 0.000111
Methyl ethyl ketone 78-93-3 33.5697 10 8.12E-7
Methyl isobutyl ketone 108-10-1 33.77641 10 8.17E-7
Phenol 108-95-2 112.03682 10 0.00000271

39

8. Control Device Information :

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
ES16
2. Emission Source Description :Plywood waste hog
3. Operating Scenario ID/
    Description:
OS - 9/plywood hog
4. SCC Number/Description:30700710/Plywood Operations ; Sawing

5. Throughput/units in 2022:
(e.g. production or fuel use):
16131 TON/yr
6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):
100
Order CS-ID CD ID
(as listed in permit)
Control Device Description
1 CS-3 CD03-WWTC Woodwaste transfer cyclone (154 inches in diameter)
2 CS-3 CD06 Bagfilter (7,095 square feet of filter area)

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
erp-08 VERTICAL
STACK 51 3.5 80 55 31749.72
erp for dry waste
transfer cyclone
and bagfilter

40

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 9 Emission Source/Group ID: ES16
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08 0
NOx NOx 08 0
TSP TSP 0.19 08 99.9 0.024 AFTER
PM10 PM10 0.09 08 99.9 0.011 AFTER
PM2.5 PM2.5 0.04 08 99.9 0.0046 AFTER
SO2 SO2 08 0
VOC VOC 08 0
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

41

8. Control Device Information :None

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
ES20
2. Emission Source Description :vat Operations
3. Operating Scenario ID/
    Description:
OS - 18/Vat Operations: Heating of Blocks
4. SCC Number/Description:39999997/Miscellaneous Industrial Processes ; Other Not Classified

5. Throughput/units in 2022:
(e.g. production or fuel use):
103401000 FT2/yr
6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):

Order CS-ID CD ID
(as listed in permit)
Control Device Description

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
ERP-20 FUGITIVE (NO
STACK) 1 100 Area = 1 Vats

42

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 18 Emission Source/Group ID: ES20
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08
NOx NOx 08
TSP TSP 08
PM10 PM10 08
PM2.5 PM2.5 08
SO2 SO2 08
VOC VOC 3.98 08
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022
Acetaldehyde 75-07-0 482.88267 08 0.00000467
Methanol 67-56-1 758.96334 08 0.00000734

43

8. Control Device Information :None

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
I-1
2. Emission Source Description :Bark hogging operations with two saws
3. Operating Scenario ID/
    Description:
OS - 2/Bark hogging operations
4. SCC Number/Description:30700799/Plywood Operations ; Other Not Classified

5. Throughput/units in 2022:
(e.g. production or fuel use):
13140 TON/yr
6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):

Order CS-ID CD ID
(as listed in permit)
Control Device Description

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
EP-FUG FUGITIVE (NO
STACK) 1 72 Area = 1 ERP for Fugitive
sources

44

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 2 Emission Source/Group ID: I-1
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08
NOx NOx 08
TSP TSP 0.01 08
PM10 PM10 0 08
PM2.5 PM2.5 0 08
SO2 SO2 08
VOC VOC 08
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

45

8. Control Device Information :None

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
I-11
2. Emission Source Description :hammer hog truck dump
3. Operating Scenario ID/
    Description:
OS - 25/Hammer hog truck dump - no controls
4. SCC Number/Description:30704004/Wood Bulk Handling and Storage - Wood/Bark ; Loading

5. Throughput/units in 2022:
(e.g. production or fuel use):
1240 TON/yr
6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):

Order CS-ID CD ID
(as listed in permit)
Control Device Description

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
EP-
Fug3
FUGITIVE (NO
STACK) 1 72 Area = 1 Hammer Hog
Truck Dump

46

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 25 Emission Source/Group ID: I-11
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08
NOx NOx 08
TSP TSP 0 08
PM10 PM10 0 08
PM2.5 PM2.5 0 08
SO2 SO2 08
VOC VOC 08
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

47

8. Control Device Information :None

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
I-12
2. Emission Source Description :dry waste truck dump
3. Operating Scenario ID/
    Description:
OS - 24/Dry Waste truck dump
4. SCC Number/Description:30704004/Wood Bulk Handling and Storage - Wood/Bark ; Loading

5. Throughput/units in 2022:
(e.g. production or fuel use):
1006 TON/yr
6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):

Order CS-ID CD ID
(as listed in permit)
Control Device Description

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
EP-
Fug2
FUGITIVE (NO
STACK) 1 72 Area = 1 Dry Waste Truck
Dump

48

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 24 Emission Source/Group ID: I-12
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08
NOx NOx 08
TSP TSP 0 08
PM10 PM10 0 08
PM2.5 PM2.5 0 08
SO2 SO2 08
VOC VOC 08
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

49

8. Control Device Information :None

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
I-2
2. Emission Source Description :Core chipping and handling
3. Operating Scenario ID/
    Description:
OS - 3/Core chipping and handling operations
4. SCC Number/Description:30700799/Plywood Operations ; Other Not Classified

5. Throughput/units in 2022:
(e.g. production or fuel use):
1233 TON/yr
6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):

Order CS-ID CD ID
(as listed in permit)
Control Device Description

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
EP-FUG FUGITIVE (NO
STACK) 1 72 Area = 1 ERP for Fugitive
sources

50

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 3 Emission Source/Group ID: I-2
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08
NOx NOx 08
TSP TSP 0 08
PM10 PM10 0 08
PM2.5 PM2.5 0 08
SO2 SO2 08
VOC VOC 08
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

51

8. Control Device Information :None

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
I-3
2. Emission Source Description :Green veneer hogging
3. Operating Scenario ID/
    Description:
OS - 4/Green veneer hogging operations
4. SCC Number/Description:30700799/Plywood Operations ; Other Not Classified

5. Throughput/units in 2022:
(e.g. production or fuel use):
19482 TON/yr
6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):

Order CS-ID CD ID
(as listed in permit)
Control Device Description

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
EP-FUG FUGITIVE (NO
STACK) 1 72 Area = 1 ERP for Fugitive
sources

52

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 4 Emission Source/Group ID: I-3
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08
NOx NOx 08
TSP TSP 0.01 08
PM10 PM10 0.01 08
PM2.5 PM2.5 0 08
SO2 SO2 08
VOC VOC 08
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

53

8. Control Device Information :None

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
I-6
2. Emission Source Description :Plywood surface patching
3. Operating Scenario ID/
    Description:
OS - 6/Plywood surface patching
4. SCC Number/Description:30700799/Plywood Operations ; Other Not Classified

5. Throughput/units in 2022:
(e.g. production or fuel use):

6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):

Order CS-ID CD ID
(as listed in permit)
Control Device Description

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
EP-FUG FUGITIVE (NO
STACK) 1 72 Area = 1 ERP for Fugitive
sources

54

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 6 Emission Source/Group ID: I-6
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08
NOx NOx 08
TSP TSP 08
PM10 PM10 08
PM2.5 PM2.5 08
SO2 SO2 08
VOC VOC 08
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

55

8. Control Device Information :None

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
I-7
2. Emission Source Description :Maintenance parts washers
3. Operating Scenario ID/
    Description:
OS - 7/Maintenance parts washer
4. SCC Number/Description:40202105/Flatwood Products Coating ; Equipment Cleanup

5. Throughput/units in 2022:
(e.g. production or fuel use):

6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):

Order CS-ID CD ID
(as listed in permit)
Control Device Description

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
EP-FUG FUGITIVE (NO
STACK) 1 72 Area = 1 ERP for Fugitive
sources

56

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 7 Emission Source/Group ID: I-7
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08
NOx NOx 08
TSP TSP 08
PM10 PM10 08
PM2.5 PM2.5 08
SO2 SO2 08
VOC VOC 08
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

57

8. Control Device Information :None

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
I-8
2. Emission Source Description :Veneer diverter exhaust cyclone
3. Operating Scenario ID/
    Description:
OS - 8/Veneer diverter exhaust cyclone
4. SCC Number/Description:30700799/Plywood Operations ; Other Not Classified

5. Throughput/units in 2022:
(e.g. production or fuel use):
69348 TON/yr
6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):

Order CS-ID CD ID
(as listed in permit)
Control Device Description

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
EP-FUG FUGITIVE (NO
STACK) 1 72 Area = 1 ERP for Fugitive
sources

58

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 8 Emission Source/Group ID: I-8
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08
NOx NOx 08
TSP TSP 0.24 02
PM10 PM10 0.24 02
PM2.5 PM2.5 08
SO2 SO2 08
VOC VOC 08
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

59

8. Control Device Information :None

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
IES-19
2. Emission Source Description :Diesel-fired water pump (250 Horsepower maximum power output) for
emergency purposes only
3. Operating Scenario ID/
    Description:
OS - 11/250 horsepower diesel-fired water pump
4. SCC Number/Description:20200407/Diesel ; Exhaust

5. Throughput/units in 2022:
(e.g. production or fuel use):
80.5 E6BTU/yr
6. Fuel Information
(If fuel is used)
%Sulfur
0.002
%Ash

Heat Content
(Btu/units)
19300 Btu/lb
7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):

Order CS-ID CD ID
(as listed in permit)
Control Device Description

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
erp-wp VERTICAL
STACK 8 0.42 72 1 8.31 erp for diesel-fired
water pump

60

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  1  )     Days per Week   (  1  )     Weeks per Year   (  26  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 11 Emission Source/Group ID: IES-19
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 0.04 08 0.95
NOx NOx 0.18 08 4.41
TSP TSP 0.01 08 0.31
PM10 PM10 0.01 08 0.31
PM2.5 PM2.5 0.01 08 0.31
SO2 SO2 0.01 08 0.29
VOC VOC 0.01 08 0.35
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022
Acetaldehyde 75-07-0 0.06174 08 0.000767
Acrolein 107-02-8 0.00745 08 0.0000925
Benzene 71-43-2 0.07511 08 0.000933
Formaldehyde 50-00-0 0.09499 08 0.00118
Naphthalene (Component
of POMTV)91-20-3 0.00683 08 0.0000848
Polycyclic Organic Matter
(Inc PAH, dioxins, etc. NC
& AP 42 historic
amorphous glob)
POM 0.01352 08 0.000168
Xylene 1330-20-7 0.02294 08 0.000285

61

8. Control Device Information :None

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
IES-23
2. Emission Source Description :Diesel-fired non-emergency generator (190 bhp maximum power output)
[GACT ZZZZ, NSPS Subpart IIII]
3. Operating Scenario ID/
    Description:
OS - 37/190 HP Diesel-Fired Water Pump #2
4. SCC Number/Description:20200401/Diesel ; Diesel

5. Throughput/units in 2022:
(e.g. production or fuel use):
47.88 E6BTU/yr
6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)
19300 Btu/lb
7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):

Order CS-ID CD ID
(as listed in permit)
Control Device Description

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
erp-wp VERTICAL
STACK 8 0.42 72 1 8.31 erp for diesel-fired
water pump

62

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  1  )     Days per Week   (  1  )     Weeks per Year   (  13  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 37 Emission Source/Group ID: IES-23
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 0.02 08
NOx NOx 0.11 08
TSP TSP 0.01 08
PM10 PM10 0.01 08
PM2.5 PM2.5 0.01 08
SO2 SO2 0.01 08
VOC VOC 0.01 08
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022
Acetaldehyde 75-07-0 0.037 08
Acrolein 107-02-8 0.004 08
Benzene 71-43-2 0.045 08
Formaldehyde 50-00-0 0.056 08
Naphthalene (Component
of POMTV)91-20-3 0.004 08
Polycyclic Organic Matter
(Inc PAH, dioxins, etc. NC
& AP 42 historic
amorphous glob)
POM 0.008 08
Xylene 1330-20-7 0.014 08

63

8. Control Device Information :None

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
IES-GEN1
2. Emission Source Description :Propane-fired emergency generator (17 kilowatts) [NSPS IIII, GACT
ZZZZ]
3. Operating Scenario ID/
    Description:
OS - 38/Propane-fired emergency generator (17 kilowatts)
4. SCC Number/Description:10201002/Liquified Petroleum Gas (LPG) ; Propane

5. Throughput/units in 2022:
(e.g. production or fuel use):

6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):

Order CS-ID CD ID
(as listed in permit)
Control Device Description

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
erp-egen VERTICAL
STACK 8 0.42 72 1 8.31
erp for propane-
fired emergency
generator

64

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 38 Emission Source/Group ID: IES-GEN1
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08
NOx NOx 08
TSP TSP 08
PM10 PM10 08
PM2.5 PM2.5 08
SO2 SO2 08
VOC VOC 08
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

65

8. Control Device Information :None

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
IES-GWS
2. Emission Source Description :Green wood fuel storage silo
3. Operating Scenario ID/
    Description:
OS - 16/Green wood fuel storage silo
4. SCC Number/Description:30700799/Plywood Operations ; Other Not Classified

5. Throughput/units in 2022:
(e.g. production or fuel use):
13140 TON/yr
6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):

Order CS-ID CD ID
(as listed in permit)
Control Device Description

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
ep11.1 DOWNWARD-
FACING VENT 70 1.25 72 0.45 33.13 silo vent
ep11.2 DOWNWARD-
FACING VENT 70 1.25 72 0.45 33.13 silo vent
ep11.3 DOWNWARD-
FACING VENT 70 1.25 72 0.45 33.13 silo vent
ep11.4 DOWNWARD-
FACING VENT 70 1.25 72 0.45 33.13 silo vent

66

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 16 Emission Source/Group ID: IES-GWS
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08
NOx NOx 08
TSP TSP 0 08
PM10 PM10 0 08
PM2.5 PM2.5 0 08
SO2 SO2 08
VOC VOC 08
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

67

Record Facility-Wide Totals From all Permitted and Non-Permitted AirPollutant Emission Sources

Facility Total CY 2022 Emissions Summary

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
Green House Gases Pollutants(GHG)
Actual Emissions (Tons/Year)
Pollutant CAS 2022 2021 % Change
Criteria Pollutants
Actual Emissions (Tons/Year)
Pollutant CAS 2022 2021 % Change
CO CO 26.85 29.03 -7.509474%
NOx NOx 37.35 41.28 -9.5203495%
PM(TSP)TSP 47.33 57.45 -17.615314%
PM10 PM10 47.08 57.17 -17.64911%
PM2.5 PM2.5 43.43 52.55 -17.354898%
SO2 SO2 0.6 .65 -7.692301%
VOC VOC 95.27 106.38 -10.443693%
Hazardous Air Pollutants(HAPS) and/or Toxic Air Pollutants(TAPs)
Actual Emissions (Pounds/Year)
Pollutant CAS 2022 2021 % Change
Pollutant Group:Arsenic & Compounds (total mass of elemental AS, arsine and all inorganic compounds) Group Sum:1.17582
Arsenic Unlisted Compounds (
Specify & Component of ASC)ASC-Other 1.17582 1.3084 -10.13299%
Pollutant Group:Cadmium & compounds (total mass inc elemental metal) Group Sum:1.73818
Cadmium Metal (elemental
unreacted, Component of CDC)7440-43-9 1.73818 1.93417 -10.133027%
Pollutant Group:Chromium (VI) Soluble Chromate Compounds (Component of CRC) Group Sum:2.54518
Chromic acid (VI) (Component of
SolCR6 & CRC)7738-94-5 2.54518 2.83217 -10.133217%
Pollutant Group:Chromium - All/Total (Inc Chromium (VI) categories, metal and Others) Group Sum:11.30902
Chromic acid (VI) (Component of
SolCR6 & CRC)7738-94-5 2.54518 2.83217 -10.133217%
Chromium Unlisted Compounds
(Specify & Component of CRC)CRC-Other 8.76384 9.75206 -10.133451%
Pollutant Group:Cobalt compounds Group Sum:.77414
68
Cobalt Unlisted Compound
(Specify & Component of COC)COC-Other 0.77414 .86143 -10.13315%
Pollutant Group:Lead and Lead compounds Group Sum:5.62346
Lead Unlisted Compounds
(Specify and Component of PBC)PBC-Other 5.62346 6.25757 -10.133486%
Pollutant Group:Manganese & compounds Group Sum:909.24841
Manganese Unlisted Compounds
(Specify & Component of MNC)MNC-Other 909.2484 1011.77664 -10.133482%
Pollutant Group:Mercury & Compounds - all total mass, inc Hg Vapor Group Sum:.41994
Mercury, vapor (Component of
HGC)7439-97-6 0.41994 .46731 -10.136743%
Pollutant Group:Nickel & Compounds, sum total mass, inc elemental Group Sum:4.27241
Nickel metal (Component of NIC)7440-02-0 4.27241 4.75414 -10.132853%
Pollutant Group:Polycyclic Organic Matter (Specific Compounds from OAQPS for TV) Group Sum:2.97971
Naphthalene (Component of
POMTV)91-20-3 2.97971 3.30501 -9.842632%
Acetaldehyde 75-07-0 2775.2341 3021.97773 -8.164972%
Acrolein 107-02-8 607.197 657.82607 -7.696416%
Benzene 71-43-2 312.64255 338.59919 -7.6658883%
Carbon tetrachloride 56-23-5 0.0 1.03616 -100.0%
Chlorine 7782-50-5 288.4764 321.00544 -10.133481%
Cumene 98-82-8 1491.1764 1615.5079 -7.696127%
Ethyl chloride (chloroethane)75-00-3 40.09211 43.43491 -7.696114%
Ethylene dichloride (1,2-
dichloroethane)107-06-2 61.4329 66.55506 -7.696127%
Formaldehyde 50-00-0 2439.1763 2700.47945 -9.676179%
Hydrogen chloride (hydrochloric
acid)7647-01-0 126.34536 140.59226 -10.133485%
Methanol 67-56-1 9035.685 11034.88484 -18.117092%
Methyl bromide 74-83-9 58.84343 63.74968 -7.696117%
Methyl chloride 74-87-3 9.71326 10.80854 -10.133473%
Methyl ethyl ketone 78-93-3 35.53791 47.97639 -25.926252%
Methyl isobutyl ketone 108-10-1 196.27261 226.8877 -13.493496%
Methylene chloride 75-09-2 0.0 57.17157 -100.00001%
Phenol 108-95-2 416.52255 482.68194 -13.706623%
Phosphorus Metal, Yellow or
White 7723-14-0 1990.122 2214.5312 -10.13349%
Polycyclic Organic Matter (Inc
PAH, dioxins, etc. NC & AP 42
historic amorphous glob)
POM 8.16459 9.06389 -9.921794%
Propionaldehyde 123-38-6 0.0 8.69559 -100.0%
Toluene 108-88-3 0.0 .00163 -100.00001%
Trichlorobenzene, 1,2,4-120-82-1 112.50792 121.88862 -7.696124%
Vinyl chloride 75-01-4 38.75273 41.98386 -7.6961207%
Vinylidene chloride 75-35-4 56.52184 61.23452 -7.6961174%
Xylene 1330-20-7 232.91048 180.90545 28.74707%

69

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
Comments From Facility:

70
1.
i.
ii.
2.
3.

The official submitting the information must certify that he/she complies with the requirements as specified in Title 15A NCAC
2Q.0520(b) which references and follows the federal definition. 40 CFR Part 70.2 defines a responsible as meaning one of the
following:

For a corporation: a president, secretary, treasurer, or vice-president of the corporation in charge of a principal business
function, or any other person who performs similar policy or decision making functions for the overall operation of one or
more manufacturing, production, or operating facilities applying for a or subject to a permit and either
the facilities employ more than 250 persons or have gross annual sales or expenditures exceeding $25 million(in
second quarter 1980 dollars); or
the delegation of authority to such representatives is approved in advance by the permitting authority;
For partnership or sole proprietorship; a general partner or the proprietor, respectively;
For a municipality, state, federal, or other public agency includes the chief executive officer having responsibility for the
overall operations of a principal geographic unit of the agency (e.g., a Regional Administrator of EPA).

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
Inventory Certification Form(Title V)
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO

North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
These forms must be completed and returned even if the facility did not operate or emissions were zero
The legally defined "Responsible Official" of record for your facility is Thomas Reams
This person or one that meets the definition below must sign this certification form.
CERTIFICATION STATEMENT:
(Important: Legally Responsible Official, read and sign after all submissions are final.)
I certify that I am the responsible official for this facility, as described above, and hereby certify that the information contained in
this air emissions report, including attached calculations and documentation, is true, accurate and complete. (Subject to legal
penalties of up to $25,000 per occurrence and possible imprisonment as outlined in G.S. § 143-215.3(a)(2))
Responsible Official's Signature Below (use blue ink): Date Signed:
Printed Name: Thomas Reams
Signature:
This form applies to Title V facilities. If this facility is not classified asTitle V, please telephone your regional office Emission
Inventory Contact at once for proper forms.
Email address of Responsible Official:[e-mail]
Information on this Form cannot be held confidential
COPY of RECORD Date Submitted: 6/23/2023 10:53:02

1

Listing of Emission Sources and Control Devices on Permit. See instructions

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
*ES ID on
Air Permit
*ES Description *CS ID *CS Description * CD ID's
ES-13-40HP 40 panel hot press
ES-13-CC Curtain coater
ES01-A
Fluidized bed wood burner with
blending chamber and dedicated
overfire air fan (80.0 million Btu/hr
heat input capacity)
CS-1 multicyclone CD02
ES01-B
Boiler (29.79 million Btu/hr heat
input capacity, based on slipstream
gas from ID No. ES-01-A) [NSPS
Subpart Dc]
CS-1 multicyclone CD02
ES03-CC Core composer with saw
ES03-CS Core saw (green or dry veneer)
ES03-PSS Panel sawing system
ES03-SMS-1 String machine including saws CS-3 bagfilter (7,095 square feet of filter area), dry
waste transfer cyclone
CD03-WWTC,
CD06
ES03-SS Wedge saw
ES04 Wood sander CS-10
Bagfilter (6,200 square feet of filter
area),Woodwaste transfer cyclone (154 inches
in diameter),Bagfilter (7,095 square feet of
filter area),
CD05, CD03-
WWTC, CD06
ES09 Direct wood-fired veneer dryer M72 CS-1 multicyclone CD02
ES10 Direct wood-fired veneer dryer M72 CS-1 multicyclone CD02
ES12 Dry wood residual storage silo CS-5 cartridge filter (1,800 square feet of filter area) CD21
ES13-GMO
Glue mixing operations consisting of
two resin storage tanks and four
mixed glue tanks

ES14 Rechip blow hog (green wood only) CS-12
Cyclone (60 inches in diameter),Woodwaste
transfer cyclone (154 inches in
diameter),Bagfilter (7,095 square feet of filter
area),
CD18, CD03-
WWTC, CD06
ES16 Dry hog CS-3 bagfilter (7,095 square feet of filter area), dry
waste transfer cyclone
CD03-WWTC,
CD06
ES17 Green wood sizing operations
including sizing screens and bins CS-12
Cyclone (60 inches in diameter),Woodwaste
transfer cyclone (154 inches in
diameter),Bagfilter (7,095 square feet of filter
area),
CD18, CD03-
WWTC, CD06
ES20 Vat operations
I-1 Bark hogging operations with two
saws
I-10 One green wood veneer stacker No. 2
I-11 Hammer hog truck dump
I-12 Dry waste truck dump
2

I-2 Tree Core chipping and handling
I-3 Green veneer hogging
I-4 Logo painting and ink marking
I-5 Logo painting and ink marking
I-6 Plywood surface patching
I-7 Maintenance parts washers
I-8 Veneer diverter exhaust cyclone
I-9 One green wood veneer stacker No. 1
IES-13-PS1 Plywood spreader
IES-13-PS2 Plywood spreader
IES-19
Diesel-fired water pump (250
Horsepower maximum power output)
for emergency purposes only[GACT
ZZZZ]

IES-23
Diesel-fired fire pump emergency
engine (190 horsepower maximum
power output) [GACT ZZZZ, NSPS
IIII]

IES-GEN1
Propane-fired emergency generator
(17 kilowatts) [NSPS IIII, GACT
ZZZZ]

IES-GWS Green wood fuel storage silo

3

Emission Source & Operating Scenario List - See Instructions

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
*ES Group ID *ES ID *OS ID *OS Description
GR2 I-10, I-9 32 Green Veneer Stackers
G-24 ES01-A, ES01-B, ES09,
ES10
26 Veneer dryers and heat source (wood
burner) lbs/SF, (Softwood)
27 Veneer dryers and heat source (wood
burner) HAPS lb/mmBtu, (Softwood)
30 Veneer dryers and heat source (wood
burner) lbs/SF, (Hardwood)
31 Veneer dryers and heat source (wood
burner) HAPS lb/mmBtu, (Hardwood)
36 Natural Gas start up burner (1 MMBtu/hr)
G-25 I-4, I-5 5 Ink and painting operations
G-27 ES14, ES17 20 Woodwaste Transfer (Rechipper) system
ES-13-40HP NONE NONE
ES-13-CC NONE NONE
ES03-CC NONE NONE
ES03-CS NONE NONE
ES03-PSS NONE NONE
ES03-SMS-1 21 Dry Waste transfer system
ES03-SS NONE NONE
ES04 12 wood sander
ES12 17 dry wood residual storage silo
ES13-GMO
10 glue mixing, application and hot presses
operations (Hardwood)
28 glue mixing, application and hot presses
operations, (softwood)
ES16 9 plywood hog
ES20 18 Vat Operations: Heating of Blocks
I-1 2 Bark hogging operations
I-11 25 Hammer hog truck dump - no controls
I-12 24 Dry Waste truck dump
I-2 3 Core chipping and handling operations
I-3 4 Green veneer hogging operations
I-6 6 Plywood surface patching
I-7 7 Maintenance parts washer
I-8 8 Veneer diverter exhaust cyclone
IES-13-PS1 NONE NONE
IES-13-PS2 NONE NONE
IES-19 11 250 horsepower diesel-fired water pump
IES-23 37 190 HP Diesel-Fired Water Pump #2
4
IES-GEN1 38 Propane-fired emergency generator (17
kilowatts)
IES-GWS 16 Green wood fuel storage silo

5

8. Control Device Information :None

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
Group GR2 consisting of I-10, I-9
2. Emission Source Description :Green Veneer Stackers
3. Operating Scenario ID/
    Description:
OS - 32/Green Veneer Stackers
4. SCC Number/Description:30700799/Plywood Operations ; Other Not Classified

5. Throughput/units in 2022:
(e.g. production or fuel use):
89292 TON/yr
6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):

Order CS-ID CD ID
(as listed in permit)
Control Device Description

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
EP-
Fug4
FUGITIVE (NO
STACK) 1 72 Area = 1 Stackers

6

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 32 Emission Source/Group ID: GR2
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08
NOx NOx 08
TSP TSP 0.31 02
PM10 PM10 0.31 02
PM2.5 PM2.5 08
SO2 SO2 08
VOC VOC 08
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

7

8. Control Device Information :

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
Group G-24 consisting of ES01-A, ES01-B, ES09, ES10
2. Emission Source Description :Veneer dryers and heat source (wood burner)
3. Operating Scenario ID/
    Description:
OS - 26/Veneer dryers and heat source (wood burner) lbs/SF, (Softwood)
4. SCC Number/Description:30700740/Plywood Operations ; Direct Wood-Fired Dryer: Non-specified
Pine Species Veneer

5. Throughput/units in 2022:
(e.g. production or fuel use):
89292000 FT2/yr
6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):
100
Order CS-ID CD ID
(as listed in permit)
Control Device Description
1 CS-1 CD02 Multicyclone (720 six-inch diameter tubes)

8

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

Operating Scenario: OS - 26 Emission Source/Group ID: G-24
ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
09A VERTICAL
STACK 66 1 350 155 7304.2 Veneer dryer erp
10cool VERTICAL
STACK 46 4 105 35 26389.37 Veneer dryer erp
09C VERTICAL
STACK 66 1 340 150 7068.58 Veneer dryer erp
10B VERTICAL
STACK 66 1 370 100 4712.38 Veneer dryer erp
10A VERTICAL
STACK 66 1 350 155 7304.2 Veneer dryer erp
10C VERTICAL
STACK 66 1 340 150 7068.58 Veneer dryer erp
10coolA VERTICAL
STACK 46 4 105 35 26389.37 Veneer dryer erp
09cool VERTICAL
STACK 46 4 107 35 26389.37 Veneer dryer erp
09coolA VERTICAL
STACK 46 4 107 35 26389.37 Veneer dryer erp
09B VERTICAL
STACK 66 1 370 100 4712.38 Veneer dryer erp

9

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 26 Emission Source/Group ID: G-24
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 26.79 04 0 0.0006 AFTER
NOx NOx 08 0
TSP TSP 08 65
PM10 PM10 08 65
PM2.5 PM2.5 08 65
SO2 SO2 08 0
VOC VOC 79.02 08 0 0.00177 AFTER
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022
Acetaldehyde 75-07-0 2143.008 10 0 0.000024 AFTER
Acrolein 107-02-8 607.1856 10 0 0.0000068 AFTER
Benzene 71-43-2 312.522 10 0 0.0000035 AFTER
Cumene 98-82-8 1491.1764 10 0 0.0000167 AFTER
Ethyl chloride
(chloroethane)75-00-3 40.09211 10 0 4.49E-7 AFTER
Ethylene dichloride (1,2-
dichloroethane)107-06-2 61.4329 10 0 6.88E-7 AFTER
Formaldehyde 50-00-0 2232.3 04 0 0.000025 AFTER
Methanol 67-56-1 3687.7596 10 0 0.0000413 AFTER
Methyl bromide 74-83-9 58.84343 10 0 6.59E-7 AFTER
Phenol 108-95-2 304.48572 10 0 0.00000341 AFTER
Trichlorobenzene, 1,2,4-120-82-1 112.50792 10 0 0.00000126 AFTER
Vinyl chloride 75-01-4 38.75273 10 0 4.34E-7 AFTER
Vinylidene chloride 75-35-4 56.52184 10 0 6.33E-7 AFTER
Xylene 1330-20-7 232.87354 10 0 0.00000260
8 AFTER

10

11

8. Control Device Information :

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
Group G-24 consisting of ES01-A, ES01-B, ES09, ES10
2. Emission Source Description :Veneer dryers and heat source (wood burner)
3. Operating Scenario ID/
    Description:
OS - 27/Veneer dryers and heat source (wood burner) HAPS lb/mmBtu,
(Softwood)
4. SCC Number/Description:30700740/Plywood Operations ; Direct Wood-Fired Dryer: Non-specified
Pine Species Veneer

5. Throughput/units in 2022:
(e.g. production or fuel use):
365160 E6BTU/yr
6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):
100
Order CS-ID CD ID
(as listed in permit)
Control Device Description
1 CS-1 CD02 Multicyclone (720 six-inch diameter tubes)

12

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

Operating Scenario: OS - 27 Emission Source/Group ID: G-24
ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
09A VERTICAL
STACK 66 1 350 155 7304.2 Veneer dryer erp
10cool VERTICAL
STACK 46 4 105 35 26389.37 Veneer dryer erp
09C VERTICAL
STACK 66 1 340 150 7068.58 Veneer dryer erp
10B VERTICAL
STACK 66 1 370 100 4712.38 Veneer dryer erp
10A VERTICAL
STACK 66 1 350 155 7304.2 Veneer dryer erp
10C VERTICAL
STACK 66 1 340 150 7068.58 Veneer dryer erp
10coolA VERTICAL
STACK 46 4 105 35 26389.37 Veneer dryer erp
09cool VERTICAL
STACK 46 4 107 35 26389.37 Veneer dryer erp
09coolA VERTICAL
STACK 46 4 107 35 26389.37 Veneer dryer erp
09B VERTICAL
STACK 66 1 370 100 4712.38 Veneer dryer erp

13

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 27 Emission Source/Group ID: G-24
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08 0
NOx NOx 37.06 10 0 0.203
TSP TSP 28.34 04 65 AFTER
PM10 PM10 28.34 04 65 AFTER
PM2.5 PM2.5 27.77 04 65 AFTER
SO2 SO2 0.58 10 0 0.00318 AFTER
VOC VOC 08 0
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022
Arsenic Unlisted
Compounds ( Specify &
Component of ASC)
ASC-Other 1.17582 10 0 0.00000322 AFTER
Cadmium Metal
(elemental unreacted,
Component of CDC)
7440-43-9 1.73816 10 0 0.00000476 AFTER
Chlorine 7782-50-5 288.4764 10 0 0.00079 AFTER
Chromic acid (VI)
(Component of SolCR6 &
CRC)
7738-94-5 2.54517 10 0 0.00000697 AFTER
Chromium Unlisted
Compounds (Specify &
Component of CRC)
CRC-
Other 8.76384 10 0 0.000024 AFTER
Cobalt Unlisted
Compound (Specify &
Component of COC)
COC-
Other 0.77414 10 0 0.00000212 AFTER
Hydrogen chloride
(hydrochloric acid)7647-01-0 126.34536 10 0 0.000346 AFTER
14

Lead Unlisted Compounds
(Specify and Component
of PBC)
PBC-Other 5.62346 10 0 0.0000154 AFTER
Manganese Unlisted
Compounds (Specify &
Component of MNC)
MNC-
Other 909.2484 10 0 0.00249 AFTER
Mercury, vapor
(Component of HGC)7439-97-6 0.41993 10 0 0.00000115 AFTER
Methyl chloride 74-87-3 9.71326 10 0 0.0000266 AFTER
Methyl ethyl ketone 78-93-3 1.96821 10 0 0.00000539 AFTER
Methyl isobutyl ketone 108-10-1 162.4962 10 0 0.000445 AFTER
Naphthalene (Component
of POMTV)91-20-3 2.96875 10 0 0.00000813 AFTER
Nickel metal (Component
of NIC)7440-02-0 4.27237 10 0 0.0000117 AFTER
Phosphorus Metal, Yellow
or White 7723-14-0 1990.122 10 0 0.00545 AFTER
Polycyclic Organic Matter
(Inc PAH, dioxins, etc. NC
& AP 42 historic
amorphous glob)
POM 8.14307 10 0 0.0000223 AFTER

15

8. Control Device Information :

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
Group G-24 consisting of ES01-A, ES01-B, ES09, ES10
2. Emission Source Description :Veneer dryers and heat source (wood burner)
3. Operating Scenario ID/
    Description:
OS - 30/Veneer dryers and heat source (wood burner) lbs/SF,
(Hardwood)
4. SCC Number/Description:30700734/Plywood Operations ; Hardwood Plywood, Veneer Dryer Direct
Wood-fired, Heated Zones

5. Throughput/units in 2022:
(e.g. production or fuel use):

6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):
100
Order CS-ID CD ID
(as listed in permit)
Control Device Description
1 CS-1 CD02 Multicyclone (720 six-inch diameter tubes)

16

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

Operating Scenario: OS - 30 Emission Source/Group ID: G-24
ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
09A VERTICAL
STACK 66 1 350 155 7304.2 Veneer dryer erp
10cool VERTICAL
STACK 46 4 105 35 26389.37 Veneer dryer erp
09C VERTICAL
STACK 66 1 340 150 7068.58 Veneer dryer erp
10B VERTICAL
STACK 66 1 370 100 4712.38 Veneer dryer erp
10A VERTICAL
STACK 66 1 350 155 7304.2 Veneer dryer erp
10C VERTICAL
STACK 66 1 340 150 7068.58 Veneer dryer erp
10coolA VERTICAL
STACK 46 4 105 35 26389.37 Veneer dryer erp
09cool VERTICAL
STACK 46 4 107 35 26389.37 Veneer dryer erp
09coolA VERTICAL
STACK 46 4 107 35 26389.37 Veneer dryer erp
09B VERTICAL
STACK 66 1 370 100 4712.38 Veneer dryer erp

17

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 30 Emission Source/Group ID: G-24
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08
NOx NOx 08
TSP TSP 08
PM10 PM10 08
PM2.5 PM2.5 08
SO2 SO2 08
VOC VOC 08
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

18

8. Control Device Information :

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
Group G-24 consisting of ES01-A, ES01-B, ES09, ES10
2. Emission Source Description :Veneer dryers and heat source (wood burner)
3. Operating Scenario ID/
    Description:
OS - 31/Veneer dryers and heat source (wood burner) HAPS lb/mmBtu,
(Hardwood)
4. SCC Number/Description:30700740/Plywood Operations ; Direct Wood-Fired Dryer: Non-specified
Pine Species Veneer

5. Throughput/units in 2022:
(e.g. production or fuel use):

6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):
100
Order CS-ID CD ID
(as listed in permit)
Control Device Description
1 CS-1 CD02 Multicyclone (720 six-inch diameter tubes)

19

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

Operating Scenario: OS - 31 Emission Source/Group ID: G-24
ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
09A VERTICAL
STACK 66 1 350 155 7304.2 Veneer dryer erp
10cool VERTICAL
STACK 46 4 105 35 26389.37 Veneer dryer erp
09C VERTICAL
STACK 66 1 340 150 7068.58 Veneer dryer erp
10B VERTICAL
STACK 66 1 370 100 4712.38 Veneer dryer erp
10A VERTICAL
STACK 66 1 350 155 7304.2 Veneer dryer erp
10C VERTICAL
STACK 66 1 340 150 7068.58 Veneer dryer erp
10coolA VERTICAL
STACK 46 4 105 35 26389.37 Veneer dryer erp
09cool VERTICAL
STACK 46 4 107 35 26389.37 Veneer dryer erp
09coolA VERTICAL
STACK 46 4 107 35 26389.37 Veneer dryer erp
09B VERTICAL
STACK 66 1 370 100 4712.38 Veneer dryer erp

20

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 31 Emission Source/Group ID: G-24
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08
NOx NOx 08
TSP TSP 08
PM10 PM10 08
PM2.5 PM2.5 08
SO2 SO2 08
VOC VOC 08
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

21

8. Control Device Information :

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
Group G-24 consisting of ES01-A, ES01-B, ES09, ES10
2. Emission Source Description :Veneer dryers and heat source (wood burner)
3. Operating Scenario ID/
    Description:
OS - 36/Natural Gas start up burner (1 MMBtu/hr)
4. SCC Number/Description:30701399/Paper - Miscellaneous Processes ; Other Not Classified

5. Throughput/units in 2022:
(e.g. production or fuel use):
0.207 E6FT3/yr
6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):
100
Order CS-ID CD ID
(as listed in permit)
Control Device Description
1 CS-1 CD02 Multicyclone (720 six-inch diameter tubes)

22

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

Operating Scenario: OS - 36 Emission Source/Group ID: G-24
ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
09A VERTICAL
STACK 66 1 350 155 7304.2 Veneer dryer erp
10cool VERTICAL
STACK 46 4 105 35 26389.37 Veneer dryer erp
09C VERTICAL
STACK 66 1 340 150 7068.58 Veneer dryer erp
10B VERTICAL
STACK 66 1 370 100 4712.38 Veneer dryer erp
10A VERTICAL
STACK 66 1 350 155 7304.2 Veneer dryer erp
10C VERTICAL
STACK 66 1 340 150 7068.58 Veneer dryer erp
10coolA VERTICAL
STACK 46 4 105 35 26389.37 Veneer dryer erp
09cool VERTICAL
STACK 46 4 107 35 26389.37 Veneer dryer erp
09coolA VERTICAL
STACK 46 4 107 35 26389.37 Veneer dryer erp
09B VERTICAL
STACK 66 1 370 100 4712.38 Veneer dryer erp

23

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 36 Emission Source/Group ID: G-24
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08 0
NOx NOx 08 0
TSP TSP 08 65
PM10 PM10 08 65
PM2.5 PM2.5 08 65
SO2 SO2 08 0
VOC VOC 08 0
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022
Benzene 71-43-2 0.00043 08 0
Cadmium Metal
(elemental unreacted,
Component of CDC)
7440-43-9 0.00002 08 0
Chromic acid (VI)
(Component of SolCR6 &
CRC)
7738-94-5 0.00001 08 0
Formaldehyde 50-00-0 0.0154 08 0
Manganese Unlisted
Compounds (Specify &
Component of MNC)
MNC-
Other 0.00001 08 0
Mercury, vapor
(Component of HGC)7439-97-6 0.00001 08 0
Naphthalene (Component
of POMTV)91-20-3 0.00013 08 0
Nickel metal (Component
of NIC)7440-02-0 0.00004 08 0
24

Polycyclic Organic Matter
(Inc PAH, dioxins, etc. NC
& AP 42 historic
amorphous glob)
POM 0 08 0

25

8. Control Device Information :None

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
Group G-25 consisting of I-4, I-5
2. Emission Source Description :Ink and painting operations
3. Operating Scenario ID/
    Description:
OS - 5/Ink and painting operations
4. SCC Number/Description:40500597/Printing - General ; Other Not Classified

5. Throughput/units in 2022:
(e.g. production or fuel use):
160 GAL/yr
6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):

Order CS-ID CD ID
(as listed in permit)
Control Device Description

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
EP-FUG FUGITIVE (NO
STACK) 1 72 Area = 1 ERP for Fugitive
sources

26

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 5 Emission Source/Group ID: G-25
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08
NOx NOx 08
TSP TSP 08
PM10 PM10 08
PM2.5 PM2.5 08
SO2 SO2 08
VOC VOC 0.12 03
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

27

8. Control Device Information :

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
Group G-27 consisting of ES14, ES17
2. Emission Source Description :Woodwaste Transfer system
3. Operating Scenario ID/
    Description:
OS - 20/Woodwaste Transfer (Rechipper) system
4. SCC Number/Description:30700799/Plywood Operations ; Other Not Classified

5. Throughput/units in 2022:
(e.g. production or fuel use):
20715 TON/yr
6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):
100
Order CS-ID CD ID
(as listed in permit)
Control Device Description
1 CS-12 CD18 Cyclone (60 inches in diameter)
2 CS-12 CD03-WWTC Woodwaste transfer cyclone (154 inches in diameter)
3 CS-12 CD06 Bagfilter (7,095 square feet of filter area)

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
erp-08 VERTICAL
STACK 51 3.5 80 55 31749.72
erp for dry waste
transfer cyclone
and bagfilter

28

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 20 Emission Source/Group ID: G-27
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08 0
NOx NOx 08 0
TSP TSP 0.25 08 99.7 0.024 AFTER
PM10 PM10 0.11 08 99.7 0.011 AFTER
PM2.5 PM2.5 0.05 08 99.7 0.0046 AFTER
SO2 SO2 08 0
VOC VOC 08 0
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

29

8. Control Device Information :

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
ES03-SMS-1
2. Emission Source Description :Woodworking operations consisting of three string machine saws, a core
saw, a strip saw, a panel sawing system and a core composer, saw,
sander baghouse (ID No. CD-05)
3. Operating Scenario ID/
    Description:
OS - 21/Dry Waste transfer system
4. SCC Number/Description:30700710/Plywood Operations ; Sawing

5. Throughput/units in 2022:
(e.g. production or fuel use):
41342000 FT2/yr
6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):
100
Order CS-ID CD ID
(as listed in permit)
Control Device Description
1 CS-3 CD03-WWTC Woodwaste transfer cyclone (154 inches in diameter)
2 CS-3 CD06 Bagfilter (7,095 square feet of filter area)

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
erp-08 VERTICAL
STACK 51 3.5 80 55 31749.72
erp for dry waste
transfer cyclone
and bagfilter

30

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 21 Emission Source/Group ID: ES03-
SMS-1
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08 0
NOx NOx 08 0
TSP TSP 13.64 10 85 AFTER
PM10 PM10 13.64 10 85 AFTER
PM2.5 PM2.5 13.64 10 0 AFTER
SO2 SO2 08 0
VOC VOC 08 0
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

31

8. Control Device Information :

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
ES04
2. Emission Source Description :wood sander
3. Operating Scenario ID/
    Description:
OS - 12/wood sander
4. SCC Number/Description:30700702/Plywood Operations ; Sanding Operations

5. Throughput/units in 2022:
(e.g. production or fuel use):

6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):
100
Order CS-ID CD ID
(as listed in permit)
Control Device Description
1 CS-10 CD05 Bagfilter (6,200 square feet of filter area)
2 CS-10 CD03-WWTC Woodwaste transfer cyclone (154 inches in diameter)
3 CS-10 CD06 Bagfilter (7,095 square feet of filter area)

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
EP-WS DOWNWARD-
FACING VENT 10 1 72 1 47.12 ERP for wood
sander

32

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 12 Emission Source/Group ID: ES04
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08
NOx NOx 08
TSP TSP 08
PM10 PM10 08
PM2.5 PM2.5 08
SO2 SO2 08
VOC VOC 08
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

33

8. Control Device Information :

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
ES12
2. Emission Source Description :dry wood residual storage silo that receives material from the dry wood
residual system cyclone ES03
3. Operating Scenario ID/
    Description:
OS - 17/dry wood residual storage silo
4. SCC Number/Description:30700799/Plywood Operations ; Other Not Classified

5. Throughput/units in 2022:
(e.g. production or fuel use):
41342000 FT2/yr
6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):
100
Order CS-ID CD ID
(as listed in permit)
Control Device Description
1 CS-5 CD21 Cartridge filter (1,800 square feet of filter area)

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
ep-12 VERTICAL
STACK 60 0.7 72 0.45 10.39 silo erp

34

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 17 Emission Source/Group ID: ES12
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08 0
NOx NOx 08 0
TSP TSP 0.19 10 99.9 0.00000929 AFTER
PM10 PM10 0.19 10 99.9 0.00000929 AFTER
PM2.5 PM2.5 0.19 10 99.9 0.00000929 AFTER
SO2 SO2 08 0
VOC VOC 08 0
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

35

8. Control Device Information :None

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
ES13-GMO
2. Emission Source Description :glue mixing, application and hot press operations, including curtain
coater, plywood spreader, 25 press and 40 press and paper overlay
operation
3. Operating Scenario ID/
    Description:
OS - 10/glue mixing, application and hot presses operations (Hardwood)
4. SCC Number/Description:30700780/Plywood Operations ; Plywood Press: Phenol-formaldehyde Resin

5. Throughput/units in 2022:
(e.g. production or fuel use):

6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):

Order CS-ID CD ID
(as listed in permit)
Control Device Description

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
erp-13 FUGITIVE (NO
STACK) 3.05 125 Area =erp for gluing and
press operations

36

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 10 Emission Source/Group ID: ES13-
GMO
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08
NOx NOx 08
TSP TSP 08
PM10 PM10 08
PM2.5 PM2.5 08
SO2 SO2 08
VOC VOC 08
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

37

8. Control Device Information :None

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
ES13-GMO
2. Emission Source Description :glue mixing, application and hot press operations, including curtain
coater, plywood spreader, 25 press and 40 press and paper overlay
operation
3. Operating Scenario ID/
    Description:
OS - 28/glue mixing, application and hot presses operations, (softwood)
4. SCC Number/Description:30700799/Plywood Operations ; Other Not Classified

5. Throughput/units in 2022:
(e.g. production or fuel use):
41342000 FT2/yr
6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):

Order CS-ID CD ID
(as listed in permit)
Control Device Description

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
erp-13 FUGITIVE (NO
STACK) 3.05 125 Area =erp for gluing and
press operations

38

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 28 Emission Source/Group ID: ES13-
GMO
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08
NOx NOx 08
TSP TSP 4.13 10 0.0002
PM10 PM10 4.13 10 0.0002
PM2.5 PM2.5 1.72 10 0.0000832
SO2 SO2 08
VOC VOC 12.13 04 0.000587
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022
Acetaldehyde 75-07-0 149.24462 10 0.00000361
Formaldehyde 50-00-0 206.71 04 0.000005
Methanol 67-56-1 4588.962 04 0.000111
Methyl ethyl ketone 78-93-3 33.5697 10 8.12E-7
Methyl isobutyl ketone 108-10-1 33.77641 10 8.17E-7
Phenol 108-95-2 112.03682 10 0.00000271

39

8. Control Device Information :

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
ES16
2. Emission Source Description :Plywood waste hog
3. Operating Scenario ID/
    Description:
OS - 9/plywood hog
4. SCC Number/Description:30700710/Plywood Operations ; Sawing

5. Throughput/units in 2022:
(e.g. production or fuel use):
16131 TON/yr
6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):
100
Order CS-ID CD ID
(as listed in permit)
Control Device Description
1 CS-3 CD03-WWTC Woodwaste transfer cyclone (154 inches in diameter)
2 CS-3 CD06 Bagfilter (7,095 square feet of filter area)

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
erp-08 VERTICAL
STACK 51 3.5 80 55 31749.72
erp for dry waste
transfer cyclone
and bagfilter

40

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 9 Emission Source/Group ID: ES16
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08 0
NOx NOx 08 0
TSP TSP 0.19 08 99.9 0.024 AFTER
PM10 PM10 0.09 08 99.9 0.011 AFTER
PM2.5 PM2.5 0.04 08 99.9 0.0046 AFTER
SO2 SO2 08 0
VOC VOC 08 0
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

41

8. Control Device Information :None

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
ES20
2. Emission Source Description :vat Operations
3. Operating Scenario ID/
    Description:
OS - 18/Vat Operations: Heating of Blocks
4. SCC Number/Description:39999997/Miscellaneous Industrial Processes ; Other Not Classified

5. Throughput/units in 2022:
(e.g. production or fuel use):
103401000 FT2/yr
6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):

Order CS-ID CD ID
(as listed in permit)
Control Device Description

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
ERP-20 FUGITIVE (NO
STACK) 1 100 Area = 1 Vats

42

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 18 Emission Source/Group ID: ES20
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08
NOx NOx 08
TSP TSP 08
PM10 PM10 08
PM2.5 PM2.5 08
SO2 SO2 08
VOC VOC 3.98 08
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022
Acetaldehyde 75-07-0 482.88267 08 0.00000467
Methanol 67-56-1 758.96334 08 0.00000734

43

8. Control Device Information :None

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
I-1
2. Emission Source Description :Bark hogging operations with two saws
3. Operating Scenario ID/
    Description:
OS - 2/Bark hogging operations
4. SCC Number/Description:30700799/Plywood Operations ; Other Not Classified

5. Throughput/units in 2022:
(e.g. production or fuel use):
13140 TON/yr
6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):

Order CS-ID CD ID
(as listed in permit)
Control Device Description

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
EP-FUG FUGITIVE (NO
STACK) 1 72 Area = 1 ERP for Fugitive
sources

44

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 2 Emission Source/Group ID: I-1
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08
NOx NOx 08
TSP TSP 0.01 08
PM10 PM10 0 08
PM2.5 PM2.5 0 08
SO2 SO2 08
VOC VOC 08
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

45

8. Control Device Information :None

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
I-11
2. Emission Source Description :hammer hog truck dump
3. Operating Scenario ID/
    Description:
OS - 25/Hammer hog truck dump - no controls
4. SCC Number/Description:30704004/Wood Bulk Handling and Storage - Wood/Bark ; Loading

5. Throughput/units in 2022:
(e.g. production or fuel use):
1240 TON/yr
6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):

Order CS-ID CD ID
(as listed in permit)
Control Device Description

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
EP-
Fug3
FUGITIVE (NO
STACK) 1 72 Area = 1 Hammer Hog
Truck Dump

46

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 25 Emission Source/Group ID: I-11
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08
NOx NOx 08
TSP TSP 0 08
PM10 PM10 0 08
PM2.5 PM2.5 0 08
SO2 SO2 08
VOC VOC 08
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

47

8. Control Device Information :None

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
I-12
2. Emission Source Description :dry waste truck dump
3. Operating Scenario ID/
    Description:
OS - 24/Dry Waste truck dump
4. SCC Number/Description:30704004/Wood Bulk Handling and Storage - Wood/Bark ; Loading

5. Throughput/units in 2022:
(e.g. production or fuel use):
1006 TON/yr
6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):

Order CS-ID CD ID
(as listed in permit)
Control Device Description

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
EP-
Fug2
FUGITIVE (NO
STACK) 1 72 Area = 1 Dry Waste Truck
Dump

48

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 24 Emission Source/Group ID: I-12
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08
NOx NOx 08
TSP TSP 0 08
PM10 PM10 0 08
PM2.5 PM2.5 0 08
SO2 SO2 08
VOC VOC 08
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

49

8. Control Device Information :None

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
I-2
2. Emission Source Description :Core chipping and handling
3. Operating Scenario ID/
    Description:
OS - 3/Core chipping and handling operations
4. SCC Number/Description:30700799/Plywood Operations ; Other Not Classified

5. Throughput/units in 2022:
(e.g. production or fuel use):
1233 TON/yr
6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):

Order CS-ID CD ID
(as listed in permit)
Control Device Description

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
EP-FUG FUGITIVE (NO
STACK) 1 72 Area = 1 ERP for Fugitive
sources

50

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 3 Emission Source/Group ID: I-2
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08
NOx NOx 08
TSP TSP 0 08
PM10 PM10 0 08
PM2.5 PM2.5 0 08
SO2 SO2 08
VOC VOC 08
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

51

8. Control Device Information :None

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
I-3
2. Emission Source Description :Green veneer hogging
3. Operating Scenario ID/
    Description:
OS - 4/Green veneer hogging operations
4. SCC Number/Description:30700799/Plywood Operations ; Other Not Classified

5. Throughput/units in 2022:
(e.g. production or fuel use):
19482 TON/yr
6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):

Order CS-ID CD ID
(as listed in permit)
Control Device Description

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
EP-FUG FUGITIVE (NO
STACK) 1 72 Area = 1 ERP for Fugitive
sources

52

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 4 Emission Source/Group ID: I-3
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08
NOx NOx 08
TSP TSP 0.01 08
PM10 PM10 0.01 08
PM2.5 PM2.5 0 08
SO2 SO2 08
VOC VOC 08
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

53

8. Control Device Information :None

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
I-6
2. Emission Source Description :Plywood surface patching
3. Operating Scenario ID/
    Description:
OS - 6/Plywood surface patching
4. SCC Number/Description:30700799/Plywood Operations ; Other Not Classified

5. Throughput/units in 2022:
(e.g. production or fuel use):

6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):

Order CS-ID CD ID
(as listed in permit)
Control Device Description

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
EP-FUG FUGITIVE (NO
STACK) 1 72 Area = 1 ERP for Fugitive
sources

54

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 6 Emission Source/Group ID: I-6
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08
NOx NOx 08
TSP TSP 08
PM10 PM10 08
PM2.5 PM2.5 08
SO2 SO2 08
VOC VOC 08
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

55

8. Control Device Information :None

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
I-7
2. Emission Source Description :Maintenance parts washers
3. Operating Scenario ID/
    Description:
OS - 7/Maintenance parts washer
4. SCC Number/Description:40202105/Flatwood Products Coating ; Equipment Cleanup

5. Throughput/units in 2022:
(e.g. production or fuel use):

6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):

Order CS-ID CD ID
(as listed in permit)
Control Device Description

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
EP-FUG FUGITIVE (NO
STACK) 1 72 Area = 1 ERP for Fugitive
sources

56

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 7 Emission Source/Group ID: I-7
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08
NOx NOx 08
TSP TSP 08
PM10 PM10 08
PM2.5 PM2.5 08
SO2 SO2 08
VOC VOC 08
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

57

8. Control Device Information :None

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
I-8
2. Emission Source Description :Veneer diverter exhaust cyclone
3. Operating Scenario ID/
    Description:
OS - 8/Veneer diverter exhaust cyclone
4. SCC Number/Description:30700799/Plywood Operations ; Other Not Classified

5. Throughput/units in 2022:
(e.g. production or fuel use):
69348 TON/yr
6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):

Order CS-ID CD ID
(as listed in permit)
Control Device Description

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
EP-FUG FUGITIVE (NO
STACK) 1 72 Area = 1 ERP for Fugitive
sources

58

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 8 Emission Source/Group ID: I-8
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08
NOx NOx 08
TSP TSP 0.24 02
PM10 PM10 0.24 02
PM2.5 PM2.5 08
SO2 SO2 08
VOC VOC 08
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

59

8. Control Device Information :None

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
IES-19
2. Emission Source Description :Diesel-fired water pump (250 Horsepower maximum power output) for
emergency purposes only
3. Operating Scenario ID/
    Description:
OS - 11/250 horsepower diesel-fired water pump
4. SCC Number/Description:20200407/Diesel ; Exhaust

5. Throughput/units in 2022:
(e.g. production or fuel use):
80.5 E6BTU/yr
6. Fuel Information
(If fuel is used)
%Sulfur
0.002
%Ash

Heat Content
(Btu/units)
19300 Btu/lb
7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):

Order CS-ID CD ID
(as listed in permit)
Control Device Description

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
erp-wp VERTICAL
STACK 8 0.42 72 1 8.31 erp for diesel-fired
water pump

60

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  1  )     Days per Week   (  1  )     Weeks per Year   (  26  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 11 Emission Source/Group ID: IES-19
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 0.04 08 0.95
NOx NOx 0.18 08 4.41
TSP TSP 0.01 08 0.31
PM10 PM10 0.01 08 0.31
PM2.5 PM2.5 0.01 08 0.31
SO2 SO2 0.01 08 0.29
VOC VOC 0.01 08 0.35
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022
Acetaldehyde 75-07-0 0.06174 08 0.000767
Acrolein 107-02-8 0.00745 08 0.0000925
Benzene 71-43-2 0.07511 08 0.000933
Formaldehyde 50-00-0 0.09499 08 0.00118
Naphthalene (Component
of POMTV)91-20-3 0.00683 08 0.0000848
Polycyclic Organic Matter
(Inc PAH, dioxins, etc. NC
& AP 42 historic
amorphous glob)
POM 0.01352 08 0.000168
Xylene 1330-20-7 0.02294 08 0.000285

61

8. Control Device Information :None

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
IES-23
2. Emission Source Description :Diesel-fired non-emergency generator (190 bhp maximum power output)
[GACT ZZZZ, NSPS Subpart IIII]
3. Operating Scenario ID/
    Description:
OS - 37/190 HP Diesel-Fired Water Pump #2
4. SCC Number/Description:20200401/Diesel ; Diesel

5. Throughput/units in 2022:
(e.g. production or fuel use):
47.88 E6BTU/yr
6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)
19300 Btu/lb
7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):

Order CS-ID CD ID
(as listed in permit)
Control Device Description

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
erp-wp VERTICAL
STACK 8 0.42 72 1 8.31 erp for diesel-fired
water pump

62

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  1  )     Days per Week   (  1  )     Weeks per Year   (  13  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 37 Emission Source/Group ID: IES-23
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 0.02 08
NOx NOx 0.11 08
TSP TSP 0.01 08
PM10 PM10 0.01 08
PM2.5 PM2.5 0.01 08
SO2 SO2 0.01 08
VOC VOC 0.01 08
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022
Acetaldehyde 75-07-0 0.037 08
Acrolein 107-02-8 0.004 08
Benzene 71-43-2 0.045 08
Formaldehyde 50-00-0 0.056 08
Naphthalene (Component
of POMTV)91-20-3 0.004 08
Polycyclic Organic Matter
(Inc PAH, dioxins, etc. NC
& AP 42 historic
amorphous glob)
POM 0.008 08
Xylene 1330-20-7 0.014 08

63

8. Control Device Information :None

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
IES-GEN1
2. Emission Source Description :Propane-fired emergency generator (17 kilowatts) [NSPS IIII, GACT
ZZZZ]
3. Operating Scenario ID/
    Description:
OS - 38/Propane-fired emergency generator (17 kilowatts)
4. SCC Number/Description:10201002/Liquified Petroleum Gas (LPG) ; Propane

5. Throughput/units in 2022:
(e.g. production or fuel use):

6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):

Order CS-ID CD ID
(as listed in permit)
Control Device Description

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
erp-egen VERTICAL
STACK 8 0.42 72 1 8.31
erp for propane-
fired emergency
generator

64

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 38 Emission Source/Group ID: IES-GEN1
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08
NOx NOx 08
TSP TSP 08
PM10 PM10 08
PM2.5 PM2.5 08
SO2 SO2 08
VOC VOC 08
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

65

8. Control Device Information :None

9. Emission Release Point (ERP) Information: (Sources vented to more than one ERP use additional entry lines):

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
1. Emission Source ID (from permit)
    or Emission Source Group ID
IES-GWS
2. Emission Source Description :Green wood fuel storage silo
3. Operating Scenario ID/
    Description:
OS - 16/Green wood fuel storage silo
4. SCC Number/Description:30700799/Plywood Operations ; Other Not Classified

5. Throughput/units in 2022:
(e.g. production or fuel use):
13140 TON/yr
6. Fuel Information
(If fuel is used)
%Sulfur

%Ash

Heat Content
(Btu/units)

7. Capture Efficiency
(% of Emissions from this Process Vented
to Control Device or Stack):

Order CS-ID CD ID
(as listed in permit)
Control Device Description

ERP ID ERP Type Height
(in feet)
Diameter
Circle (enter #):
Rectangle (L x W)
(in 0.1 feet)
Temperature
(F)
Velocity
(Feet/sec)
Volume Flow
Rate (Acfm)
ERP Description
ep11.1 DOWNWARD-
FACING VENT 70 1.25 72 0.45 33.13 silo vent
ep11.2 DOWNWARD-
FACING VENT 70 1.25 72 0.45 33.13 silo vent
ep11.3 DOWNWARD-
FACING VENT 70 1.25 72 0.45 33.13 silo vent
ep11.4 DOWNWARD-
FACING VENT 70 1.25 72 0.45 33.13 silo vent

66

10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2022)
    Hours per Day   (  24  )     Days per Week   (  7  )     Weeks per Year   (  52  )

11. Typical Start & End Times For Operating Scenario:       Start:    0             End:    2359   

12. Seasonal Periods Percent Annual Throughput:

13.  Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.

Operating Scenario: OS - 16 Emission Source/Group ID: IES-GWS
Jan-Feb + Dec
2022 25%March-May
2022 25%June-Aug.
2022 25%Sept.-Nov.
2022 25%
GHG
Pollutants CAS
Emissions-
GHG
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022

Criteria
(NAAQS)
Pollutants
Pollutant
Code
Emissions-
Criteria
Pollutants
(Tons/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after
all controls)
Emission
Factor
Ef
Control
2022
CO CO 08
NOx NOx 08
TSP TSP 0 08
PM10 PM10 0 08
PM2.5 PM2.5 0 08
SO2 SO2 08
VOC VOC 08
HAP/TAP
Pollutants (In Alphabetical Order)
CAS
(see instructions)
Emissions
HAP/TAPS
(Pounds/Year)
Emission
Estimation
Method Code
(See Instructions)
Control
Efficiency
(Net after all controls)
Emission
Factor
EF
Control
2022

67

Record Facility-Wide Totals From all Permitted and Non-Permitted AirPollutant Emission Sources

Facility Total CY 2022 Emissions Summary

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory - Calendar Year 2022
Green House Gases Pollutants(GHG)
Actual Emissions (Tons/Year)
Pollutant CAS 2022 2021 % Change
Criteria Pollutants
Actual Emissions (Tons/Year)
Pollutant CAS 2022 2021 % Change
CO CO 26.85 29.03 -7.509474%
NOx NOx 37.35 41.28 -9.5203495%
PM(TSP)TSP 47.33 57.45 -17.615314%
PM10 PM10 47.08 57.17 -17.64911%
PM2.5 PM2.5 43.43 52.55 -17.354898%
SO2 SO2 0.6 .65 -7.692301%
VOC VOC 95.27 106.38 -10.443693%
Hazardous Air Pollutants(HAPS) and/or Toxic Air Pollutants(TAPs)
Actual Emissions (Pounds/Year)
Pollutant CAS 2022 2021 % Change
Pollutant Group:Arsenic & Compounds (total mass of elemental AS, arsine and all inorganic compounds) Group Sum:1.17582
Arsenic Unlisted Compounds (
Specify & Component of ASC)ASC-Other 1.17582 1.3084 -10.13299%
Pollutant Group:Cadmium & compounds (total mass inc elemental metal) Group Sum:1.73818
Cadmium Metal (elemental
unreacted, Component of CDC)7440-43-9 1.73818 1.93417 -10.133027%
Pollutant Group:Chromium (VI) Soluble Chromate Compounds (Component of CRC) Group Sum:2.54518
Chromic acid (VI) (Component of
SolCR6 & CRC)7738-94-5 2.54518 2.83217 -10.133217%
Pollutant Group:Chromium - All/Total (Inc Chromium (VI) categories, metal and Others) Group Sum:11.30902
Chromic acid (VI) (Component of
SolCR6 & CRC)7738-94-5 2.54518 2.83217 -10.133217%
Chromium Unlisted Compounds
(Specify & Component of CRC)CRC-Other 8.76384 9.75206 -10.133451%
Pollutant Group:Cobalt compounds Group Sum:.77414
68
Cobalt Unlisted Compound
(Specify & Component of COC)COC-Other 0.77414 .86143 -10.13315%
Pollutant Group:Lead and Lead compounds Group Sum:5.62346
Lead Unlisted Compounds
(Specify and Component of PBC)PBC-Other 5.62346 6.25757 -10.133486%
Pollutant Group:Manganese & compounds Group Sum:909.24841
Manganese Unlisted Compounds
(Specify & Component of MNC)MNC-Other 909.2484 1011.77664 -10.133482%
Pollutant Group:Mercury & Compounds - all total mass, inc Hg Vapor Group Sum:.41994
Mercury, vapor (Component of
HGC)7439-97-6 0.41994 .46731 -10.136743%
Pollutant Group:Nickel & Compounds, sum total mass, inc elemental Group Sum:4.27241
Nickel metal (Component of NIC)7440-02-0 4.27241 4.75414 -10.132853%
Pollutant Group:Polycyclic Organic Matter (Specific Compounds from OAQPS for TV) Group Sum:2.97971
Naphthalene (Component of
POMTV)91-20-3 2.97971 3.30501 -9.842632%
Acetaldehyde 75-07-0 2775.2341 3021.97773 -8.164972%
Acrolein 107-02-8 607.197 657.82607 -7.696416%
Benzene 71-43-2 312.64255 338.59919 -7.6658883%
Carbon tetrachloride 56-23-5 0.0 1.03616 -100.0%
Chlorine 7782-50-5 288.4764 321.00544 -10.133481%
Cumene 98-82-8 1491.1764 1615.5079 -7.696127%
Ethyl chloride (chloroethane)75-00-3 40.09211 43.43491 -7.696114%
Ethylene dichloride (1,2-
dichloroethane)107-06-2 61.4329 66.55506 -7.696127%
Formaldehyde 50-00-0 2439.1763 2700.47945 -9.676179%
Hydrogen chloride (hydrochloric
acid)7647-01-0 126.34536 140.59226 -10.133485%
Methanol 67-56-1 9035.685 11034.88484 -18.117092%
Methyl bromide 74-83-9 58.84343 63.74968 -7.696117%
Methyl chloride 74-87-3 9.71326 10.80854 -10.133473%
Methyl ethyl ketone 78-93-3 35.53791 47.97639 -25.926252%
Methyl isobutyl ketone 108-10-1 196.27261 226.8877 -13.493496%
Methylene chloride 75-09-2 0.0 57.17157 -100.00001%
Phenol 108-95-2 416.52255 482.68194 -13.706623%
Phosphorus Metal, Yellow or
White 7723-14-0 1990.122 2214.5312 -10.13349%
Polycyclic Organic Matter (Inc
PAH, dioxins, etc. NC & AP 42
historic amorphous glob)
POM 8.16459 9.06389 -9.921794%
Propionaldehyde 123-38-6 0.0 8.69559 -100.0%
Toluene 108-88-3 0.0 .00163 -100.00001%
Trichlorobenzene, 1,2,4-120-82-1 112.50792 121.88862 -7.696124%
Vinyl chloride 75-01-4 38.75273 41.98386 -7.6961207%
Vinylidene chloride 75-35-4 56.52184 61.23452 -7.6961174%
Xylene 1330-20-7 232.91048 180.90545 28.74707%

69

      COPY of RECORD Date Submitted:  6/23/2023 10:53:02
As entered in AERO
Facility Name:  Southern Veneer Specialty Products, LLC - Moncure
306 Corinth Road
Moncure, NC 27559

Facility ID : 1900039
Permit :  03424
County : Chatham
DAQ Region : RRO
Comments From Facility:

70
Southern Veneer Specialty Products, LLC
Facility-Wide Summary of Actual Emissions
2022 Air Emissions Inventory
Criteria emissions are in tons per year; HAP/TAP emissions are in pounds per year. Highlighted compounds are above the HAP/TAP de minimus threshold.
FBB &Dry Waste Sander Dry Waste Hog Fuel Rechipper Plywood Glue Ops Fire End Seal T&G Bark Core Green Ink & Plywood Parts Veneer Gr. Veneer Hammer Hog Dry Waste
Dryers Storage System Transfer Silos System Waste Hog & Presses Pumps 1&2 Vat Ops Spraybooth Saw Hog Chipper Veneer Hog Painting Patching Washer Diverter Stackers Truck Dump Truck Dump
ES-1,9,10 ES-12 ES-04 ES-03 ES-11 ES-14, 17 ES-16 ES-13 ES-19, 23 ES-20 ES-21 ES-22 IS-IN-1 IS-IN-2 IS-IN-3 IS-IN-4&5 IS-IN-6 IS-IN-7 IS-IN-8 IS-IN-9&10 IS-IN-11 IS-IN-12 lb/yr
CO 26.80 0.06 53,715
NOx 37.07 0.28 74,714
PM 28.34 0.19 0.00 13.64 0.00 0.25 0.19 4.13 0.02 0.00 0.00 0.01 0.00 0.01 0.24 0.31 0.00 0.00 94,692
PM10 28.34 0.19 0.00 13.64 0.00 0.11 0.09 4.13 0.02 0.00 0.00 0.004 0.00 0.01 0.24 0.31 0.00 0.00 94,190
PM2.5 27.77 0.19 0.00 13.64 0.00 0.05 0.04 1.72 0.02 0.00 0.001 0.00 0.002 0.00 0.00 86,869
VOC 79.02 0.00 12.13 0.02 3.98 0.00 0.00 0.12 0.00 0.00 190,561
SO2 0.58 0.02 1,199
Compound
(lb/yr)
Emissions
lb/yr
DeMinimus
(lb/yr)
Report in
AEI?
Acetaldehyde (TH)2143.0080 0.00 149.24 0.10 482.88 0.00 2,775.23 10 Yes
Acetophenone (H)0.6719 0.67 100 No
Acrolein (TH)607.1856 0.01 607.20 10 Yes
Antimony & Compounds (H)1.2635 1.26 10 No
Arsenic & Compounds (TH)1.1758 1.18 0.01 Yes
Benzene (TH)312.5224 0.12 312.64 1 Yes
Benzo(a)pyrene (T)0.0056 0.00 0.01 1 No
Beryllium Compounds (TH)0.0146 0.01 1 No
Cadmium Compounds (TH)1.7382 1.74 0.1 Yes
Carbon tetrachloride (TH)0.9312 0.93 1 No
Chlorine (TH)288.4766 288.48 100 Yes
Chlorobenzene (TH)6.0617 6.06 10 No
Chloroform (TH)0.9312 0.93 100 No
Chromium–Other compds (H)8.7639 8.76 0.1 Yes
Chromium VI Compounds (TH)2.5452 2.55 0.01 Yes
Cobalt compounds (H)0.7741 0.77 1 No
Cumene (H)1491.1764 1,491.18 100 Yes
Dinitrophenol, 2,4- (H)0.0478 0.05 0.1 No
Di(2-ethylhexyl)phthalate (DEHP) (TH)0.0170 0.02 10 No
Ethyl benzene (H)11.4295 11.43 100 No
Ethyl chloride (chloroethane) (H)40.0698 40.07 10 Yes
Ethylene dichloride (TH)61.4329 61.43 1 Yes
Formaldehyde (TH)2232.3155 0.00 206.71 0.15 0.00 2,439.18 10 Yes
Hexachlorodibenzo-p-dioxin 1,2,3,6,7,8 (T)0.0000 0.000001 0.00001 No
Hexane (TH)0.3718 0.37 100 No
Hydrogen chloride (TH)126.3455 126.35 100 Yes
Lead and Lead compounds (H)5.6235 5.62 1 Yes
Manganese & compounds (TH)909.2492 909.25 10 Yes
Mercury Compound (TH)0.4200 0.42 0.001 Yes
Methanol (H)3687.7596 0.00 4588.96 758.96 0.00 9,035.68 1000 Yes
Methyl bromide (H) 58.8211 58.82 1 Yes
Methyl chloride (H)9.7133 9.71 1 Yes
Methyl chloroform (TH)14.3508 14.35 100 No
Methyl ethyl ketone (T)1.9682 33.57 35.54 100 No
Methyl Isobutyl Ketone (TH)162.4963 33.78 196.27 10 Yes
Methylene chloride (TH)52.7492 52.75 1 Yes
Naphthalene (H)2.9689 0.01 2.98 1 Yes
Nickel Compounds (TH)4.2724 4.27 1 Yes
Nitrophenol, 4- (H)0.0344 0.03 10 No
Pentachlorophenol (TH)0.0164 0.02 1 No
Perchloroethylene (TH)8.9829 8.98 100 No
Phenol (TH)304.4857 112.04 416.52 100 Yes
Phosphorus Metal, Yellow or White (H)1990.1237 1,990.12 1 Yes
Polychlorinated biphenyls (TH)0.0027 0.003 10 No
Polycyclic Organic Matter (H)8.1444 0.02 8.17 1 Yes
Propionaldehyde (H)7.8144 7.81 10 No
Propylene dichloride (H)6.1347 6.13 10 No
Selenium compounds (H)0.1968 0.20 10 No
Styrene (TH)5.6235 5.62 100 No
Tetrachlorodibenzo-p-dioxin, 2,3,7,8- (TH)0.0000 0.000001 0.00001 No
Toluene (TH)1.3408 0.05 1.39 100 No
Trichlorobenzene, 1,2,4- (H)112.6195 112.62 100 Yes
Trichloroethylene (TH)7.2667 7.27 1000 No
Trichlorofluoromethane (CFC 111) (T)5.8060 5.81 100 No
Trichlorophenol, 2,4,6- (H)0.1008 0.10 1 No
Vinyl chloride (TH)38.7751 38.78 0.1 Yes
Vinylidene chloride (1,1-dichloroethene) (TH)56.5442 56.54 0.1 Yes
Xylene Mixed Isomers (TH)232.8959 0.04 232.93 100 Yes
Compound
(tpy)tons/yr
Emissions Emissions
26.86
43.43
95.28
0.60
37.36
47.35
47.10
Activity and Usage 2022 Annual Amount
Vat Production 103,401,000 ft2 (3/8")
Hardwood Veneer Production 0 ft2 (3/8")
Softwood Veneer Production 89,292,000 ft2 (3/8")
Hardwood Plywood Production 0 ft2 (3/8")
Softwood Plywood Production 41,342,000 ft2 (3/8")
Plywood Press Hours of Operation 5,823 hours
Sander Production 0 ft2 (3/8")
T&G Saw Production 0 ft2 (3/8")
T&G Saw Hours of Operation 0 hours
Pine Logs 211,127 tons
Gum Logs 0 tons
Poplar Logs 0 tons
Boiler Hours of Operation 6,822 hours
Plant wide Fuel Combustion 16,131 ton (as fired)
Dry Wood Heat Content 7,776 Btu/lb
Total Dry Wood Combusted 250,869 MMBtu/yr
Green Chips Purchased for Combustion 0 tons chips
Green Chips Combusted 13,446 tons chips
Green Chips Heat Content 2 4,541 Btu/lb
Total Green Chips Combusted 114,291 MMBtu
Total Hog Fuel Combusted1 13,140 ton (as fired)
Poplar Bark Heat Content2 5,703 Btu/lb
Gum Bark Heat Content2 4,952 Btu/lb
Pine Bark Heat Content2 4,018 Btu/lb
Total Hog Fuel Combusted 13,140 MMBtu
Total Green Fuel Combusted 114,291 MMBtu
Total of All Fuel Combusted 365,160 MMBtu
Boiler Efficiency 86.0 %
Natural Gas Combusted 2,107.00 therms
350 gal/yr
46 hr/yr
300 gal/yr
36 hr/yr
N/A gal/yr
0 hr/yr
Plant wide Fuel
Combustion
Southern Veneer Specialty Products, LLC
Annual Activity and Usage Information
2022 Air Emissions Inventory
Plywood
Production
Log Throughput
250 HP Diesel Fired Water Pump #1
17 kW Propane Fired Generator
190 HP Diesel Fired Water Pump #2
G:\Southern Veneer Products\Moncure, NC\Air\Reporting\2022\Emissions Inventory\Working\Moncure 2022 AEI Calcs - FINAL\Prod Info
Activity and Usage 2022 Annual Amount
Southern Veneer Specialty Products, LLC
Annual Activity and Usage Information
2022 Air Emissions Inventory
Veneer Diverter 69,348 ton/yr
Hammer Hog Truck Dump 1,240 ton/yr
Dry Waste Truck Dump 1,006 ton/yr
Core Chipping and Handling 1,233 ton/yr
Green Veneer Hogging Operations 19,482 ton/yr
Maintenance Parts Washer Sol'n Purchased 0 gal/yr
End Seal Paint 0 gal/yr
Paint Usage (Logo painting)20 gal/yr
Ink Usage 140 gal/yr
Green Veneer Stackers 89,292 ton/yr
Plywood Surface Patching (W.B. Face)0 gal/yr
Plywood Surface Patching (Part A)0 gal/yr
Plywood Surface Patching (Part B)0 gal/yr
Cores Sold in 2022 0 cores
PF Resin Application Rate 0.017 Tons/MMSF
PF Resin Usage 1,263 tons
2. Heat Content is Chester Plywood fuel analysis data.
PF Resin Usage
Miscellaneous
1. Bark fired is calculated based on log usage and percentage of a log that is bark (assumes 80% of
bark originally on log is combusted). Dry fuel is estimated to be 15% of total fuel usage based on
data from Chester Plywood (sister plant).
G:\Southern Veneer Products\Moncure, NC\Air\Reporting\2022\Emissions Inventory\Working\Moncure 2022 AEI Calcs - FINAL\Prod Info
Southern Veneer Specialty Products, LLC
Emission Source(s): Fluidized Bed Wood Boiler and Two Direct Heated Dryers
Source ID Number(s): ES-01, ES-09, ES-10, CD-02 (multiclone on boiler)
Emission Point(s): EP-09a-d, EP-10a-d
2022 Actual Process Throughput:6,822 Boiler operating hours/yr
16,131 dry wood (ton/yr)
26,586 green wood (ton/yr)
365,160 MMBtu/yr Total Fuel Combusted
114,291 MMBtu/yr Green Wood Combusted
250,869 MMBtu/yr Dry Wood Combusted
0 sf/yr Hardwood Veneer Production
89,292,000 sf/yr Softwood Veneer Production
89,292,000 sf/yr Total Veneer Production
0 MMBtu/yr Btu of Wood Combusted - ratioed for Hardwood Veneer
365,160 MMBtu/yr Btu of Wood Combusted - ratioed for Softwood Veneer
Actual Emissions Summary:
Total
Emissions*Emissions*Emissions
ton/yr ton/yr ton/yr
CO 3.76E-04 lb/sf 1 0.00 6.00E-04 lb/sf 1 26.79 26.8
NOx 2.03E-01 lb/MMBtu 6 0.00 2.03E-01 lb/MMBtu 6 37.06 37.1
PM 8.308 lb/hr 3 0.00 8.308 lb/hr 3 28.34 28.3
PM10 8.308 lb/hr 3 0.00 8.308 lb/hr 3 28.34 28.3
PM2.5 8.14 lb/hr 3 0.00 8.14 lb/hr 3 27.77 27.8
VOC (as acetic acid - hardwood and pinene - softwood)2.41E-04 lb/sf 1 0.00 1.07E-03 lb/sf 1 47.77 47.8
WPP1 VOC 1.34E-04 lb/sf 4 0.00 1.77E-03 lb/sf 4 79.02 79.0
SO2 3.18E-03 lb/MMBtu 6 0.00 3.18E-03 lb/MMBtu 6 0.58 0.58
Emissions*Emissions*Emissions
lb/yr lb/yr lb/yr
Acetaldehyde (TH)5.23E-06 lb/sf 2 0.00 2.40E-05 lb/sf 2 2143.01 2143.01
Acetophenone (H)1.84E-06 lb/MMBtu 6 0.00 1.84E-06 lb/MMBtu 6 0.67 0.67
Acrolein (TH)1.27E-04 lb/MMBtu 6 0.00 6.80E-06 lb/sf 2 607.19 607.19
Antimony & compounds (H)3.46E-06 lb/MMBtu 6 0.00 3.46E-06 lb/MMBtu 6 1.26 1.26
Arsenic & compounds (TH)3.22E-06 lb/MMBtu 6 0.00 3.22E-06 lb/MMBtu 6 1.18 1.18
Benzene (TH) 2.90E-07 lb/sf 2, 5 0.00 3.50E-06 lb/sf 2 312.52 312.52
Benzo(a)pyrene (T)1.52E-08 lb/MMBtu 6 0.00 1.52E-08 lb/MMBtu 6 0.01 0.01
Beryllium & compounds (TH)4.00E-08 lb/MMBtu 6 0.00 4.00E-08 lb/MMBtu 6 0.01 0.01
Cadmium & compounds (TH)4.76E-06 lb/MMBtu 6 0.00 4.76E-06 lb/MMBtu 6 1.74 1.74
Carbon tetrachloride (TH)2.55E-06 lb/MMBtu 6 0.00 2.55E-06 lb/MMBtu 6 0.93 0.93
Chlorine (TH)7.90E-04 lb/MMBtu 5 0.00 7.90E-04 lb/MMBtu 5 288.48 288.48
Chlorobenzene (TH)1.66E-05 lb/MMBtu 6 0.00 1.66E-05 lb/MMBtu 6 6.06 6.06
Hardwood Softwood
Emission Factor Units Ref.
Emission Factor Units Ref.
Compound
Compound
Emission Factor Units Ref.
Emission Factor Units Ref.
Southern Veneer Specialty Products, LLC
Emission Source(s): Fluidized Bed Wood Boiler and Two Direct Heated Dryers
Source ID Number(s): ES-01, ES-09, ES-10, CD-02 (multiclone on boiler)
Emission Point(s): EP-09a-d, EP-10a-d
2022 Actual Process Throughput:6,822 Boiler operating hours/yr
16,131 dry wood (ton/yr)
26,586 green wood (ton/yr)
365,160 MMBtu/yr Total Fuel Combusted
114,291 MMBtu/yr Green Wood Combusted
250,869 MMBtu/yr Dry Wood Combusted
0 sf/yr Hardwood Veneer Production
89,292,000 sf/yr Softwood Veneer Production
89,292,000 sf/yr Total Veneer Production
0 MMBtu/yr Btu of Wood Combusted - ratioed for Hardwood Veneer
365,160 MMBtu/yr Btu of Wood Combusted - ratioed for Softwood Veneer
Actual Emissions Summary:
TotalHardwoodSoftwood
Emissions*Emissions*Emissions*
lb/yr lb/yr lb/yr
Chloroform (TH)2.55E-06 lb/MMBtu 6 0.00 2.55E-06 lb/MMBtu 6 0.93 0.93
Chromium compounds (H)2.40E-05 lb/MMBtu 6 0.00 2.40E-05 lb/MMBtu 6 8.76 8.76
Chromium VI (T/H)6.97E-06 lb/MMBtu 6 0.00 6.97E-06 lb/MMBtu 6 2.55 2.55
Cobalt compounds (H)2.12E-06 lb/MMBtu 6 0.00 2.12E-06 lb/MMBtu 6 0.77 0.77
Cumene (H) 8.93E-06 lb/sf 2, 5 0.00 1.67E-05 lb/sf 2, 5 1491.18 1491.18
Dinitrophenol, 2,4- (H)1.31E-07 lb/MMBtu 6 0.00 1.31E-07 lb/MMBtu 6 0.05 0.048
Di(2-ethylhexyl)phthalate (DEHP) (TH)4.65E-08 lb/MMBtu 6 0.00 4.65E-08 lb/MMBtu 6 0.02 0.017
Ethyl benzene (H)3.13E-05 lb/MMBtu 6 0.00 3.13E-05 lb/MMBtu 6 11.43 11.43
Ethyl chloride (chloroethane) (H) 2.40E-07 lb/sf 2, 5 0.00 4.49E-07 lb/sf 2, 5 40.07 40.07
Ethylene dichloride (1,2-dichloroethane) (TH) 3.68E-07 lb/sf 2, 5 0.00 6.88E-07 lb/sf 2, 5 61.43 61.43
Formaldehyde (TH)9.83E-06 lb/sf 1 0.00 2.50E-05 lb/sf 1 2232.30 2232.30
Hexachlorodibenzo-p-dioxin 1,2,3,6,7,8 (T)1.76E-11 lb/ODT 6 5.19E-07 1.76E-11 lb/ODT 6 0.00 1.04E-06
Hydrogen chloride (hydrochloric acid) (TH)3.46E-04 lb/MMBtu 6 0.00 3.46E-04 lb/MMBtu 6 126.35 126.35
Lead & compounds (H)1.54E-05 lb/MMBtu 6 0.00 1.54E-05 lb/MMBtu 6 5.62 5.62
Manganese & compounds (TH)2.49E-03 lb/MMBtu 6 0.00 2.49E-03 lb/MMBtu 6 909.25 909.25
Mercury, vapor (Include in Mercury&Compds)(TH)1.15E-06 lb/MMBtu 6 0.00 1.15E-06 lb/MMBtu 6 0.42 0.42
Methanol (H)9.49E-06 lb/sf 2 0.00 4.13E-05 lb/sf 2 3687.76 3687.76
Methyl bromide (H) (bromomethane) 3.53E-07 lb/sf 2, 5 0.00 6.59E-07 lb/sf 2, 5 58.82 58.82
Methyl chloride (H) (chloromethane)2.66E-05 lb/MMBtu 6 0.00 2.66E-05 lb/MMBtu 6 9.71 9.71
Methyl chloroform (TH) (1,1,1 trichloroethane)3.93E-05 lb/MMBtu 6 0.00 3.93E-05 lb/MMBtu 6 14.35 14.35
Methyl ethyl ketone (TH) 1.01E-06 lb/sf 2, 5 0.00 5.39E-06 lb/MMBtu 6 1.97 1.97
Methyl isobutyl ketone (TH) 9.63E-07 lb/sf 2, 5 0.00 4.45E-04 lb/MMBtu 6 162.50 162.50
Methylene chloride (TH) (dichloromethane) 3.16E-07 lb/sf 2, 5 0.00 5.91E-07 lb/sf 2, 5 52.75 52.75
Naphthalene (H)8.13E-06 lb/MMBtu 6 0.00 8.13E-06 lb/MMBtu 6 2.97 2.97
Nickel metal (Component of Nickel & Compounds) (TH)1.17E-05 lb/MMBtu 6 0.00 1.17E-05 lb/MMBtu 6 4.27 4.27
Nitrophenol, 4- (H)9.41E-08 lb/MMBtu 6 0.00 9.41E-08 lb/MMBtu 6 0.03 0.034
Pentachlorophenol (TH)4.48E-08 lb/MMBtu 6 0.00 4.48E-08 lb/MMBtu 6 0.02 0.016
Ref.UnitsEmission FactorCompoundEmission Factor Units Ref.
Southern Veneer Specialty Products, LLC
Emission Source(s): Fluidized Bed Wood Boiler and Two Direct Heated Dryers
Source ID Number(s): ES-01, ES-09, ES-10, CD-02 (multiclone on boiler)
Emission Point(s): EP-09a-d, EP-10a-d
2022 Actual Process Throughput:6,822 Boiler operating hours/yr
16,131 dry wood (ton/yr)
26,586 green wood (ton/yr)
365,160 MMBtu/yr Total Fuel Combusted
114,291 MMBtu/yr Green Wood Combusted
250,869 MMBtu/yr Dry Wood Combusted
0 sf/yr Hardwood Veneer Production
89,292,000 sf/yr Softwood Veneer Production
89,292,000 sf/yr Total Veneer Production
0 MMBtu/yr Btu of Wood Combusted - ratioed for Hardwood Veneer
365,160 MMBtu/yr Btu of Wood Combusted - ratioed for Softwood Veneer
Actual Emissions Summary:
TotalHardwood Softwood
Emissions* Emissions* Emissions*
lb/yr lb/yr lb/yr
Perchloroethylene (PERC) (tetrachloroethylene) (TH) 2.46E-05 lb/MMBtu 6 0.00 2.46E-05 lb/MMBtu 6 8.98 8.98
Phenol (TH) 1.63E-06 lb/sf 2, 5 0.00 3.41E-06 lb/sf 2 304.49 304.49
Phosphorus Metal, Yellow or White (H) 5.45E-03 lb/MMBtu 6 0.00 5.45E-03 lb/MMBtu 6 1990.12 1990.12
Polychlorinated biphenyls (TH) 7.41E-09 lb/MMBtu 6 0.000 7.41E-09 lb/MMBtu 6 0.0027 0.003
Polycyclic Organic Matter (H) 2.23E-05 lb/MMBtu 6 0.00 2.23E-05 lb/MMBtu 2 8.14 8.14
Propionaldehyde (H) 9.08E-07 lb/sf 2, 5 0.00 2.14E-05 lb/MMBtu 6 7.81 7.81
Propylene dichloride (H) (1,2 dichloropropane) 1.68E-05 lb/MMBtu 6 0.00 1.68E-05 lb/MMBtu 6 6.13 6.13
Selenium compounds (H) 5.39E-07 lb/MMBtu 6 0.00 5.39E-07 lb/MMBtu 6 0.20 0.20
Styrene (TH) 3.87E-07 lb/sf 2, 5 0.00 1.54E-05 lb/MMBtu 6 5.62 5.62
Tetrachlorodibenzo-p-dioxin, 2,3,7,8- (TH) 1.10E-11 lb/ODT 6 3.24E-07 1.10E-11 lb/ODT 6 3.24E-07 6.49E-07
Toluene (TH) 3.42E-07 lb/sf 2, 5 0.00 3.67E-06 lb/MMBtu 6 1.34 1.34
Trichlorobenzene, 1,2,4- (H) 6.75E-07 lb/sf 2, 5 0.00 1.26E-06 lb/sf 2, 5 112.62 112.62
Trichloroethylene (TH) 1.99E-05 lb/MMBtu 6 0.00 1.99E-05 lb/MMBtu 6 7.27 7.27
Trichlorofluoromethane (CFC 111) (T) 1.59E-05 lb/MMBtu 6 0.00 1.59E-05 lb/MMBtu 6 5.81 5.81
Trichlorophenol, 2,4,6- (H) 2.76E-07 lb/MMBtu 6 0.00 2.76E-07 lb/MMBtu 6 0.10 0.101
Vinyl chloride (chloroethene) (TH) 2.32E-07 lb/sf 2, 5 0.00 4.34E-07 lb/sf 2, 5 38.78 38.78
Vinylidene chloride (1,1-dichloroethene) (TH) 3.60E-07 lb/sf 2, 5 0.00 6.33E-07 lb/sf 2, 5 56.54 56.54
o-Xylene (TH) 3.95E-07 lb/sf 2, 5 0.00 7.38E-07 lb/sf 2, 5 65.92 65.92
m,p-Xylene (TH) 3.95E-07 lb/sf 2, 5 0.00 1.87E-06 lb/sf 2 166.98 166.98
Units Ref.Compound Emission Factor Units Ref. Emission Factor
*Note: 1 -All emissions include emissions from wood combustion and wood drying.
2 -Based on the 'Tables of Hazardous and Toxic Air Pollutants for North Carolina Emission Inventory and Permitting Purposes' on the DAQ Emission Inventory web page,
compounds emissions below the de minimus (minimum reporting threshold) was not reported in 2022 AERO. https://deq.nc.gov/media/7233/download
References:
1 - Stack Testing Data, 1996
2 - Historically-used factors for direct-fired veneer dryers. Xylenes are speciated, but combined on summary tab per NCDAQ guidance.
3 - Based on Feb. 12, 2010 stack test. PM10 assumed to be equal to PM. PM2.5 assumed to be 98%
4 - OTM26: Interim VOC Measurement Protocol for the Wood Products Industry – July 2007
5 - Half the average detection values are used for non-detects.
6 - Historical industry-specific emission factors
Southern Veneer Specialty Products, LLC
Emission Source(s): Fluidized Bed Wood Boiler and Two Direct Heated Dryers
Source ID Number(s): ES-01, ES-09, ES-10, CD-02 (multiclone on boiler)
Emission Point(s): EP-09a-d, EP-10a-d
- Natural Gas burner for boiler start up
2022 Actual Process Throughput:
Natural Gas 2,107 therms/yr
0.207 MMcf/yr 1
Multiclone
Natural Gas Control Emissions
Compound Emission Factor (1)Eff. (2)(lb/yr)(TPY)
CO 84 lb/MMcf --8.68E-03
NOx 100 lb/MMcf --1.03E-02
PM 7.6 lb/MMcf 90%--7.85E-05
PM-10 7.6 lb/MMcf 90%--7.85E-05
PM-2.5 7.6 lb/MMcf 90%--7.85E-05
SO2 0.6 lb/MMcf --6.20E-05
VOC 5.5 lb/MMcf --5.68E-04
Arsenic 2.00E-04 lb/MMcf 90%0.000004 --
Benzene 2.10E-03 lb/MMcf 0.000434 --
Benzo(a)pyrene 1.20E-06 lb/MMcf 0.000000 --
Beryllium 1.20E-05 lb/MMcf 90%0.000000 --
Cadmium 1.10E-03 lb/MMcf 90%0.000023 --
Chromium 1.40E-03 lb/MMcf 90%0.000029 --
Cobalt 8.40E-05 lb/MMcf 90%0.000002 --
Formaldehyde 7.50E-02 lb/MMcf 0.015493 --
Hexane 1.80E+00 lb/MMcf 0.371824 --
Lead 5.00E-04 lb/MMcf 90%0.000010 --
Manganese 3.80E-04 lb/MMcf 90%0.000008 --
Mercury, vapor 2.60E-04 lb/MMcf 0.000054 --
Naphthalene 6.10E-04 lb/MMcf 0.000126 --
Nickel 2.10E-03 lb/MMcf 90%0.000043 --
POM 8.82E-05 lb/MMcf 0.000018 --
Selenium 2.40E-05 lb/MMcf 90%0.000000 --
Toluene 3.40E-03 lb/MMcf 0.000702 --
Notes:
1. AP-42, Section 1.4, July 1998. Natural gas heating value of 1,020 Btu/cf and 100,000 Btu/therm.
2: Control efficiency from permit application applied to uncontrolled particulate emission factors.
Southern Veneer Specialty Products, LLC
Emission Source:Dry Waste System - Dry Waste Storage Silo
Source ID Number:ES-12, CD-21
Emission Point:EP-06, EP-12
2022 Actual Process Throughput:
Plywood Production 41,342,000 sf/yr

Emissions Summary:
Compound Emission Factor Reference Emissions
PM 9.29E-06 lb/sf 1 0.19 tpy
PM10 9.29E-06 lb/sf 1 0.19 tpy
PM2.5 9.29E-06 lb/sf 1 0.19 tpy
References:
1.Emission factor from original Title V Permit Application
Southern Veneer Specialty Products, LLC
Emission Source:Sander System
Source ID Number:ES-04, CD-05
Emission Point:EP-05
2022 Actual Process Throughput:
Sander Operation Production

Emissions Summary:
Compound Emission Factor Reference Emissions
PM 1.15E-05 lb/sf 1 0.00 tpy
PM10 1.15E-05 lb/sf 1 0.00 tpy
PM2.5 1.15E-05 lb/sf 1 0.00 tpy
VOC 1.51E-04 lb/sf 2, 3 0.00 tpy
Acetaldehyde 1.77E-06 lb/sf 2 0.00 lb/yr
Formaldehyde 1.22E-06 lb/sf 2 0.00 lb/yr
Methanol 7.73E-06 lb/sf 2 0.00 lb/yr
References:
1. Stack Testing Data, 1995
2. Historical industry-specific emission factors
3. VOC calculated as sum of VOC as C, formaldehyde, and 50% of methanol factors.
0 sf/yr
This unit did not operate in 2021 or 2022
Southern Veneer Specialty Products, LLC
Emission Source:Dry Waste Transfer System
Source ID Number:ES-03, CD-06
Emission Point:EP-06
2022 Actual Process Throughput:
Hardwood Plywood Production - sf/yr
Softwood Plywood Production 41,342,000 sf/yr
Emissions Summary:
Softwood Hardwood
Compound Emission Factor Ref.Emission Factor Ref.Emissions
PM 6.60E-04 lb/sf 1 1.15E-05 lb/sf 1 13.64 tpy
PM10 6.60E-04 lb/sf 1 1.15E-05 lb/sf 1 13.64 tpy
PM2.5 6.60E-04 lb/sf 1 1.15E-05 lb/sf 1 13.64 tpy
References:
1.Emission factor from original Title V Permit Application
Southern Veneer Specialty Products, LLC
Emission Source:Green Chip Sizing, Rechip, Transfer
Source ID Number:ES-17, ES-18, ES-14
Emission Point:EP-14
2022 Actual Process Throughput:
Tons Green Chips 20,715 ton/yr

Emissions Summary:
Emissions are fugitive in nature.
Specific emission factors are not available for rechipping operations. Rechipping emissions are
assumed to be similar to emissions from debarking. PM emissions for debarking are based on
the former AP-42 emission factor for drum debarkers and total amount of green material
processed by the rechipper; PM2.5 = 19% of PM.
PM 0.024 lb/ton
PM10 0.011 lb/ton
PM2.5 0.0046 lb/ton
Green Emission Annual Annual
Compound Material Factor Emissions Emissions
(tpy)(lb/ton)(lb/yr)(TPY)
PM 20,715 0.024 497.16 0.25
PM10 20,715 0.011 227.87 0.11
PM2.5 20,715 0.0046 94.46 0.05
Southern Veneer Specialty Products, LLC
Emission Source:Plywood Waste Hog
Source ID Number:ES-16
Emission Point:EP-16
2022 Actual Process Throughput:
Tons Dry Wood 16,131 ton/yr

Emissions Summary:
Emissions are fugitive in nature.
Specific emission factors are not available for rechipping operations. Rechipping emissions are
assumed to be similar to emissions from debarking. PM emissions for debarking are based on
the former AP-42 emission factor for drum debarkers and total amount of green material
processed by the rechipper; PM2.5 = 19% of PM.
PM 0.024 lb/ton
PM10 0.011 lb/ton
PM2.5 0.0046 lb/ton
Green Emission Annual Annual
Compound Material Factor Emissions Emissions
(tpy)(lb/ton)(lb/yr)(TPY)
PM 16,131 0.024 387.14 0.19
PM10 16,131 0.011 177.44 0.09
PM2.5 16,131 0.0046 73.56 0.04
Southern Veneer Specialty Products, LLC
Emission Source(s):Glue Operations and Pressing
Source ID Number(s):ES-13
Emission Point:EP-13
2022 Actual Process Throughput:
0 sf/yr
41,342,000 sf/yr
Emissions Emissions
ton/yr ton/yr ton/yr
PM 2.00E-04 lb/sf 1 0.00 2.00E-04 lb/sf 1 4.13 4.13
PM10 2.00E-04 lb/sf 1 0.00 2.00E-04 lb/sf 1 4.13 4.13
PM2.5 8.32E-05 lb/sf 1 0.00 8.32E-05 lb/sf 1 1.72 1.72
VOC (WPP1)1.71E-04 lb/sf 2 0.00 5.87E-04 lb/sf 2 12.13 12.13
Emissions Emissions
lb/yr lb/yr lb/yr
Acetaldehyde --1 3.61E-06 lb/sf 1 149.24 149.24
Formaldehyde 5.00E-06 lb/sf 2 0.00 5.00E-06 lb/sf 2 206.71 206.71
Methanol 1.11E-04 lb/sf 2 0.00 1.11E-04 lb/sf 2 4,588.96 4,588.96
Methyl Ethyl Ketone --1 8.12E-07 lb/sf 1 33.57 33.57
Methyl Isobutyl Ketone --1 8.17E-07 lb/sf 1 33.78 33.78
Phenol 1.59E-05 lb/sf 1 0.00 2.71E-06 lb/sf 1 112.04 112.04
References:
1.Historical industry-specific emission factors
PM10 is assumed to equal PM, and PM2.5 is assumed to equal condensable PM. Softwood factors for PM are used, as
hardwood factors are not available.
2.Press Compliance Test on December 10, 2014. The WPP1 VOC factor was developed per EPA OTM-26 method.
Total
EmissionsRef.
Ref.Emission
Factor Units
Emission
Factor Units
Softwood
Softwood Total
Emissions
Units Ref.
Units Ref.
Hardwood
Hardwood Plywood Production
Softwood Plywood Production
Compound Emission
Factor
Emission
Factor
Hardwood
Compound
Southern Veneer Specialty Products, LLC
Emission Source(s):Vat Operations
Source ID Number(s):ES-20
Emission Point:EP-20
2022 Actual Process Throughput:
103,401,000 sf/yr
Emissions
ton/yr
VOC - Hardwood 1.20E-05 lb/sf 1, 2 0.00
VOC - Softwood 7.70E-05 lb/sf 1, 2 3.98
Total VOC 3.98
Emissions
lb/yr
Acetaldehyde 4.67E-06 lb/sf 1 482.88
Methanol 7.34E-06 lb/sf 1 758.96
References:
1.AP-42 Section 10.5 VOC softwood is sum of VOC compounds plus pinenes.
2.Hardwood and softwood vat production is ratioed based on log throughput (gum and poplar
vs pine, respectively).
Total Vat Production
Compound
Compound
Emission Factor
Emission Factor
Units Reference
Units Reference
Southern Veneer Specialty Products, LLC
Emission Source:Bark Hog
Source ID Number:IS-IN-1
Emission Point:IS-IN-1
2022 Actual Process Throughput:
Fuel Hogged 13,140 ton/yr

Emissions Summary:
Emissions are fugitive in nature.
Specific emission factors are not available for hogging operations. Hogging emissions are assumed to be
similar to emissions from debarking. PM emissions for debarking are based on the former AP-42 emission
factor for drum debarkers and total amount of green material processed by the hogs; PM2.5 = 19% of PM.
The hog is located inside a building. A 95% control has been applied to account for building control.
PM 0.024 lb/ton
PM10 0.011 lb/ton
PM2.5 0.0046 lb/ton
Green Emission Inside Annual Annual
Compound Material Factor Building Emissions Emissions
(tpy)(lb/ton)Control (%)(lb/yr)(TPY)
PM 13,140 0.024 95%15.77 0.01
PM10 13,140 0.011 95%7.23 0.004
PM2.5 13,140 0.0046 95%3.00 0.001
Southern Veneer Specialty Products, LLC
Emission Source:Core Chipping
Source ID Number:IS-IN-2
Emission Point:IS-IN-2
2022 Actual Process Throughput:
Cores Chipped 1,233 ton/year

Emissions Summary:
Emissions are fugitive in nature.
Specific emission factors are not available for chipping operations. Chipping emissions are assumed to be
similar to emissions from debarking. PM emissions for debarking are based on the former AP-42 emission
factor for drum debarkers and total amount of green material processed by the chipper; PM2.5 = 19% of PM.
The chipper is located inside a building. A 95% control has been applied to account for building control.
PM 0.024 lb/ton
PM10 0.011 lb/ton
PM2.5 0.0046 lb/ton
Green Emission Inside Annual Annual
Compound Material Factor Building Emissions Emissions
(tpy)(lb/ton)Control (%)(lb/yr)(TPY)
PM 1,233 0.024 95%1.48 7.40E-04
PM10 1,233 0.011 95%0.68 3.39E-04
PM2.5 1,233 0.0046 95%0.28 1.41E-04
Southern Veneer Specialty Products, LLC
Emission Source:Green Veneer Hogging Operations
Source ID Number:IS_IN-3
Emission Point:IS_IN-3
2022 Actual Process Throughput:
Green Veneer Hogged 19,482 ton/year

Emissions Summary:
Emissions are fugitive in nature.
Specific emission factors are not available for hogging operations. Hogging emissions are assumed to be
similar to emissions from debarking. PM emissions for debarking are based on the former AP-42 emission
factor for drum debarkers and total amount of green material processed by the hogs; PM2.5 = 19% of PM.
The hog is located inside a building. A 95% control has been applied to account for building control.
PM 0.024 lb/ton
PM10 0.011 lb/ton
PM2.5 0.0046 lb/ton
Green Emission Inside Annual Annual
Compound Material Factor Building Emissions Emissions
(tpy)(lb/ton)Control (%)(lb/yr)(TPY)
PM 19,482 0.024 95%23.38 0.01
PM10 19,482 0.011 95%10.72 0.01
PM2.5 19,482 0.0046 95%4.44 0.002
Southern Veneer Specialty Products, LLC
Emission Source:Ink and Painting Operations
Source ID Number:IS-IN-4, IS-IN-5
Emission Point:IS-IN-4, IS-IN-5
2022 Actual Process Throughput:
Logo paint usage 20 gal/yr
Ink usage 140 gal/yr
Ink density 8.21 lb/gal
Emissions Summary:
Compound Emission Factor Reference Emissions
VOC - logo paint 4.00E-01 lb VOC/gal 1 0.00 tpy
VOC - ink 2.00E-01 lb VOC/lb 1 0.11 tpy
Total VOC 0.12 tpy
References:
1.Safety Data Sheets
Southern Veneer Specialty Products, LLC
Emission Source:Veneer Diverter Exhaust Cyclone
Source ID Number:IS-IN-8
Emission Point:IS-IN-8
2022 Actual Process Throughput:
Green Veneer 69,348 ton/yr

Emissions Summary:
Compound Emission Factor Reference Emissions
PM 1.40E-02 lb/DT 1 0.24 tpy
PM10 1.40E-02 lb/DT 1 0.24 tpy
References:
1.Weyerhaeuser Test Data, Title V Bulletin #19, average green chips factor
Southern Veneer Specialty Products, LLC
Emission Source:Green Veneer Stackers
Source ID Number:IS-IN-9, IS-IN-10
Emission Point:IS-IN-9, IS-IN-10
2022 Actual Process Throughput:
Green Veneer 89,292 ton/yr

Emissions Summary:
Compound Emission Factor Reference Stacker
Emissions
PM 1.40E-02 lb/DT 1 0.31 tpy
PM10 1.40E-02 lb/DT 1 0.31 tpy
References:
1.Weyerhaeuser Test Data, Title V Bulletin #19, average green chips factor
Southern Veneer Specialty Products, LLC
Emission Source:Hammer Hog Truck Dump
Source ID Number:IS-IN-11
Emission Point:IS-IN-11
2022 Actual Process Throughput:
Dry waste 1,240 ton/yr

Emissions Summary:
Emissions are calculated use the "drop loading equation" from AP-42 Section
13.2.4 (Aggregate Handling and Storage Piles), November 2006.
AP-42 Section 13.2.4:
where:
E =emission factor
k =particle size multiplier (dimensionless)
U =mean wind speed (mph)
M =material moisture content (%)
k =0.74 For PM
k =0.35 For PM10
k =0.053 For PM2.5
U =6.88 mph for Charlotte, NC (nearest major city) from 2008-2012 Charlotte met data
M =50 %, Wood assumed to have average moisture content of 50% based on AP-42,
Section 1.6, Wood Residue Combustion in Boilers, Sept. 2003
Therefore, emission factors (lb PM per ton) =
PM factor =3.96E-05 lb/ton
PM10 factor =1.87E-05 lb/ton
PM2.5 factor =2.83E-06 lb/ton
Compound Emission Factor Emissions
PM 3.96E-05 lb/ton 2.45E-05 tpy
PM10 1.87E-05 lb/ton 1.16E-05 tpy
PM2.5 2.83E-06 lb/ton 1.76E-06 tpy
4.1
3.1
2
M
5
U
0.0032 k (lb/ton) E











Southern Veneer Specialty Products, LLC
Emission Source:Dry Waste Truck Dump
Source ID Number:IS-IN-12
Emission Point:IS-IN-12
2022 Actual Process Throughput:
Dry waste 1,006 ton/yr

Emissions Summary:
Emissions are calculated use the "drop loading equation" from AP-42 Section
13.2.4 (Aggregate Handling and Storage Piles), November 2006.
AP-42 Section 13.2.4:
where:
E =emission factor
k =particle size multiplier (dimensionless)
U =mean wind speed (mph)
M =material moisture content (%)
k =0.74 For PM
k =0.35 For PM10
k =0.053 For PM2.5
U =6.88 mph for Charlotte, NC (nearest major city) from 2008-2012 Charlotte met data
M =50 %, Wood assumed to have average moisture content of 50% based on AP-42,
Section 1.6, Wood Residue Combustion in Boilers, Sept. 2003
Therefore, emission factors (lb PM per ton) =
PM factor =3.96E-05 lb/ton
PM10 factor =1.87E-05 lb/ton
PM2.5 factor =2.83E-06 lb/ton
Compound Emission Factor Emissions
PM 3.96E-05 lb/ton 1.99E-05 tpy
PM10 1.87E-05 lb/ton 9.42E-06 tpy
PM2.5 2.83E-06 lb/ton 1.43E-06 tpy
4.1
3.1
2
M
5
U
0.0032 k (lb/ton) E











Southern Veneer Specialty Products, LLC
Emission Source:Hog Fuel Storage Silo
Source ID Number:IES-GWS (ES-11)
Emission Point:EP-11
2022 Actual Process Throughput:
Hog Fuel 13,140 ton/yr
Emissions Summary:
Emissions are calculated use the "drop loading equation" from AP-42 Section
13.2.4 (Aggregate Handling and Storage Piles), November 2006.
AP-42 Section 13.2.4:
where:
E =emission factor
k =particle size multiplier (dimensionless)
U =mean wind speed (mph)
M =material moisture content (%)
k =0.74 For PM
k =0.35 For PM10
k =0.053 For PM2.5
U =6.88 mph for Charlotte, NC (nearest major city) from 2008-2012 Charlotte met data
M =50 %, Wood assumed to have average moisture content of 50% based on AP-42,
Section 1.6, Wood Residue Combustion in Boilers, Sept. 2003
Therefore, emission factors (lb PM per ton) =
PM factor =3.96E-05 lb/ton
PM10 factor =1.87E-05 lb/ton
PM2.5 factor =2.83E-06 lb/ton
Compound Emission Factor Emissions
PM 3.96E-05 lb/ton 0.00026 tpy
PM10 1.87E-05 lb/ton 0.00012 tpy
PM2.5 2.83E-06 lb/ton 0.00002 tpy
4.1
3.1
2
M
5
U
0.0032 k (lb/ton) E











Southern Veneer Specialty Products, LLC
Emission Source:250 HP Diesel-Fired Water Pump #1
Source ID Number:ES-19
2022 Actual Process Throughput:
Diesel Heating Value 137 MMBtu/Mgals AP-42 Table 3.4-1
Conversion Factor 7,000 Btu/hp-hr AP-42 Table 3.3-1
Hours of Operation 46 Hr/yr
Heat Input (250 hp) 80.50 MMBtu/yr
No. 2 Fuel Oil Usage 587 gal/yr
Emissions
ton/yr
CO 9.50E-01 lb/MMBtu 1 0.038
NOx 4.41E+00 lb/MMBtu 1 0.178
PM 3.10E-01 lb/MMBtu 1 0.012
PM10 3.10E-01 lb/MMBtu 1 0.012
PM2.5 3.10E-01 lb/MMBtu 1 0.012
SO2 2.90E-01 lb/MMBtu 1 0.012
VOC 3.50E-01 lb/MMBtu 1 0.014
Emissions
lb/yr
Acetaldehyde (TH) 7.67E-04 lb/MMBtu 1 0.06174
Acrolein (TH) 9.25E-05 lb/MMBtu 1 0.00745
Benzene (TH) 9.33E-04 lb/MMBtu 1 0.07511
Benzo(a)pyrene (T) 1.88E-07 lb/MMBtu 1 0.00002
Formaldehyde (TH) 1.18E-03 lb/MMBtu 1 0.09499
Naphthalene (H) 8.48E-05 lb/MMBtu 1 0.00683
Toluene (TH) 4.09E-04 lb/MMBtu 1 0.03292
Xylene Mixed Isomers (TH) 2.85E-04 lb/MMBtu 1 0.02294
POM 1.68E-04 lb/MMBtu 1
0.01352
Reference
Reference
Emission Factor
Emission Factor
Compound Units
Compound Units
References:
1. AP-42, Section 3.3, Tables 3.3-1 and 3.3-2, October 1996
Note:
1.Based on the 'Tables of Hazardous and Toxic Air Pollutants for North Carolina Emission Inventory and
Permitting Purposes' on the DAQ Emission Inventory web page, Toluene emission was below the de minimus
(minimum reporting threshold) values. Thus it was not reported in 2022 AERO.
https://deq.nc.gov/media/7233/download
Southern Veneer Specialty Products, LLC
Emission Source:190 HP Diesel-Fired Water Pump #2
Source ID Number:ES-23
2022 Actual Process Throughput:
Diesel Heating Value 137 MMBtu/Mgals AP-42 Table 3.4-1
Conversion Factor 7,000 Btu/hp-hr AP-42 Table 3.3-1
Hours of Operation 36 Hr/yr
Heat Input (190 hp) 47.88 MMBtu/yr
No. 2 Fuel Oil Usage 349 gal/yr
Emissions
ton/yr
CO 9.50E-01 lb/MMBtu 1 0.023
NOx 4.41E+00 lb/MMBtu 1 0.106
PM 3.10E-01 lb/MMBtu 1 0.007
PM10 3.10E-01 lb/MMBtu 1 0.007
PM2.5 3.10E-01 lb/MMBtu 1 0.007
SO2 2.90E-01 lb/MMBtu 1 0.007
VOC 3.50E-01 lb/MMBtu 1 0.008
Emissions
lb/yr
Acetaldehyde (TH) 7.670E-04 lb/MMBtu 1 0.037
Acrolein (TH) 9.250E-05 lb/MMBtu 1 0.004
Benzene (TH) 9.330E-04 lb/MMBtu 1 0.045
Benzo(a)pyrene (T) 1.880E-07 lb/MMBtu 1 0.000009
Formaldehyde (TH) 1.180E-03 lb/MMBtu 1 0.056
Naphthalene (H) 8.480E-05 lb/MMBtu 1 0.004
Toluene (TH) 4.090E-04 lb/MMBtu 1 0.020
Xylene Mixed Isomers (TH) 2.850E-04 lb/MMBtu 1 0.014
POM 1.680E-04 lb/MMBtu 1
0.008
Compound Emission Factor Units Reference
Compound Emission Factor Units Reference
References:
1. AP-42, Section 3.3, Tables 3.3-1 and 3.3-2, October 1996
Note:
1.Based on the 'Tables of Hazardous and Toxic Air Pollutants for North Carolina Emission Inventory and
Permitting Purposes' on the DAQ Emission Inventory web page, Toluene emission was below the de minimus
(minimum reporting threshold) values. Thus it was not reported in 2022 AERO.
https://deq.nc.gov/media/7233/download
Southern Veneer Specialty Products, LLC
Emission Source:17 kW Propane-Fired Generator
Source ID Number:IES-GEN1 This unit did not operate in 2022.
2022 Actual Process Throughput:
Hours of Operation 0 Hr/yr
Fuel Units Source
Engine Power Rating 22.8 hp
Default Engine Average Fuel Consumption 7,000 Btu/hp-hr AP-42 Section 3.3
Generator Equivalent Heat Input (Actual)0.00 MMBtu/yr Calculation
Emissions
ton/yr
CO 3.86E-01 lb/MMBtu 1 0.00
NOx 3.17E+00 lb/MMBtu 1 0.00
PM 4.83E-02 lb/MMBtu 1 0.00
PM10 3.84E-02 lb/MMBtu 1 0.00
PM2.5 3.84E-02 lb/MMBtu 1 0.00
SO2 5.88E-04 lb/MMBtu 1 0.00
VOC 1.20E-01 lb/MMBtu 1 0.00
Emissions
lb/yr
Acetaldehyde (TH)7.76E-03 lb/MMBtu 1 0.00000
Acrolein (TH)7.78E-03 lb/MMBtu 1 0.00000
Benzene (TH)1.94E-03 lb/MMBtu 1 0.00000
Benzo(a)pyrene (T)5.68E-09 lb/MMBtu 1 0.00000
Formaldehyde (TH)5.52E-02 lb/MMBtu 1 0.00000
Naphthalene (H)9.63E-05 lb/MMBtu 1 0.00000
Toluene (TH)9.63E-04 lb/MMBtu 1 0.00000
Xylene Mixed Isomers (TH)2.68E-04 lb/MMBtu 1 0.00000
References:
1.No emission factors are available for propane IC engines, emission factors were obtained from AP-42,
Section 3.2, Table 3.2-1 (July 2000).
Factor
Compound Emission Factor Units Reference
Compound Emission Factor Units Reference
2022 Air Emissions Inventory
Source In Compliance?
FBB PM 15.38 lb/hr 8.31 lb/hr YES
FBB SO2 2.3 lb/MMBtu 0.003 lb/MMBtu YES
Facility-wide Methanol (Max HAP) 10 ton/yr 4.52 ton/yr YES
Facility-wide Total HAP 25 ton/yr 10.68 ton/yr YES
Acrolein 2.4 lb/hr 0.16 lb/hr YES
Arsenic 1.48 lb/yr 0.59 lb/yr YES
Benzene 772.92 lb/yr 156.26 lb/yr YES
Beryllium 26.41 lb/yr 0.01 lb/yr YES
Cadmium 35.2 lb/yr 0.87 lb/yr YES
Chlorine 101.13 lb/day 0.51 lb/day YES
Chlorine 27.02 lb/hr 0.02 lb/hr YES
Formaldehyde 3.77 lb/hr 0.16 lb/hr YES
Hydrogen Chloride 21.02 lb/hr 0.01 lb/hr YES
Manganese 83.6 lb/day 1.60 lb/day YES
Nickel (metal) 16.19 lb/day 0.01 lb/day YES
Phenol 6.74 lb/hr 0.02 lb/hr YES
Vinyl Chloride 38,656 lb/yr 19.39 lb/yr YES
Acrolein 2.4 lb/hr 0.16 lb/hr YES
Arsenic 1.48 lb/yr 0.59 lb/yr YES
Benzene 772.92 lb/yr 156.26 lb/yr YES
Beryllium 26.41 lb/yr 0.01 lb/yr YES
Cadmium 35.2 lb/yr 0.87 lb/yr YES
Chlorine 101.13 lb/day 0.51 lb/day YES
Chlorine 27.02 lb/hr 0.02 lb/hr YES
Formaldehyde 3.77 lb/hr 0.16 lb/hr YES
Hydrogen Chloride 21.02 lb/hr 0.01 lb/hr YES
Manganese 83.6 lb/day 1.60 lb/day YES
Nickel (metal) 16.19 lb/day 0.01 lb/day YES
Phenol 6.74 lb/hr 0.02 lb/hr YES
Vinyl Chloride 38,656 lb/yr 19.39 lb/yr YES
Formaldehyde 2.33 lb/hr 0.04 lb/hr YES
Phenol 28.62 lb/hr 0.02 lb/hr YES
ES09
ES10
ES13
Southern Veneer Specialty Products, LLC
Permit Limit Check
T29 Permit Limit 2022 Actual Emissions
Southern Veneer Specialty Products, LLC
Emission Source: Tongue and Groove Saw
Source ID Number: ES-22, CD-06
Emission Point: EP-06
Unit Removed
2022 Actual Process Throughput:
Saw Operating Hours 0 hours
Saw Production 0 sf/yr
Calculations for this source are based on the following assumptions:
The T&G saw removes 0.5" per panel.
The T&G saw trims the finished plywood panels of 96" x 48". The nominal thickness is 3/8" (0.375).
The density of dry pine is 35.6 lb/ft3.
Conservatively assume baghouse efficiency of 99.5%.
Volume of Annual T&G-T&G
Compound Total Panels T&G / Panel Dust Generated Rate
(per year)(ft3/panel)(ton/yr)(ton/hr)
PM 0 0.0104 0.000 0.000
Emissions Summary
Baghouse Annual
Compound Efficiency Emissions
(%)(lb/yr)(ton/yr)
PM 99.5 0.00 0.0000
PM10 2 99.5 0.00 0.0000
PM2.5 2 99.5 0.00 0.0000
Compound Emission Factor Reference Emissions
VOC 7.55E-05 lb/sf 3 0.0000 tpy
Acetaldehyde 5.59E-07 lb/sf 3 0.000 lb/yr
Formaldehyde 3.89E-07 lb/sf 3 0.000 lb/yr
Methanol 6.82E-06 lb/sf 3 0.000 lb/yr
References:
1. Emission rates for PM based on estimated amount of trim and dust generated and conservative
baghouse efficiency of 99.5%.
2. AP-42 Appendix B.1, Section 10.5, October 1986. PM10 is assumed to be 32.1% of PM from
sander cyclone and baghouse. PM2.5 is assumed to be 14.3% of PM from sander cyclone and baghouse.
3. Historical industry-specific emission factors
Southern Veneer Specialty Products, LLC
Emission Source:Plywood Surface Patching
Source ID Number:IS-IN-6
Emission Point:IS-IN-6
2022 Actual Process Throughput:
Plywood Surface Patching (Part A) - gal/yr
Density 12.58 lb/gal
Plywood Surface Patching (Part B)1 - gal/yr
Density 10.33 lb/gal
Plywood Surface Patching (W.B. Face) - gal/yr
Emissions Summary:
Compound Component Units Reference lb/yr tons/yr
VOC - U-100-A Patch 0.02% % wt 2 0.0 0.00
VOC - W.B. Face 0.25 lb/gal 3 0.0 0.00
MDI - U-100-B Patch 38% % wt 1 negligible negligible
References:
1. Safety Data Sheet for U-100-B Patch Catalyst, April 2014. Due to the extremely low vapor
pressure of the material (<0.000001 mmHg) per the manufacturer's SDS, VOC and HAP emissions
from the use of this product are assumed to be negligible. (The SDS shows 0% VOC.)
2. Safety Data Sheet for U-100-A Patch, April 2014.
3. Safety Data Sheet for Putty W.B. Face - Pine, January 1994. SDS states there are no
reportable quantities of ingredients present and no chemicals subject to reporting requirements.
Emissions
This process did not operate in 2022.
Southern Veneer Specialty Products, LLC
Emission Source(s):End Sealer Spray Booth
Source ID Number(s):ES-21
Emission Point:EP-21
Unit Removed
2022 Actual Process Throughput:
0 gal/yr
Estimated Overspray 30.0%
Spray Booth Filter Efficiency 97.5%
Emissions
ton/yr
PM 90%% wt 1 0.00
PM10 90%% wt 1 0.00
VOC 0.4%% wt 2 0.00
Emissions
lb/yr
Vinyl acetate 0.031%% wt 2, 3 0.00
References:
1.Conservatively assume 90% solids in material. Assume 30% overspray into filter.
2.Compound speciation from SDS, April 2010. Specific gravity is 0.96.
3.Compound speciation from WVCO letter, April 26, 2012.
Compound Emission Factor Units Ref
End Seal Material Usage
Compound Emission Factor Units Ref
Southern Veneer Specialty Products, LLC
Emission Source:Maintenance Parts Washer
Source ID Number:IS-IN-7
Emission Point:IS-IN-7
2022 Actual Process Throughput:
Gallons Purchased: 0 gal/yr

Emissions Summary:
Compound Emission Factor Reference Emissions
VOC 6.58 lb/gal 1 0.00 tpy
References:
1. Safety Data Sheet
This unit did not operate in 2022.