AQ_F_1000127_20220111_ST_RvwMemo

DIVISION OF AIR QUALITY
January 11,2022
MEMORANDUM
To: Brad Newland,P.E.,Wilmington Regional Office
From: Taylor Fort, Stationary Source Compliance Branch(SSCB)
Subject: Chuck's Construction Mine
Calabash,Brunswick County,NC
Facility ID 1000127,Air Permit No. 10643G0I
Visible Emissions Testing of Trench Burner ACI
Conducted September 20, 2021 by Michael Hardee and Scott Sanders
DAQ Tracking No. 2021-276ST
EPA Method 9 testing for visible emissions(VE)was conducted on September 20, 2021 for the following
source.ACI is a portable air curtain incinerator listed in the permit as a McPherson M30G Trench Burner
(8 tons per hour firing capacity)that commenced construction after December 9,2004. The emissions test
results demonstrate compliance with the applicable regulations.
15A NCAC 2D .1904 Air Curtain Incinerators and 40 CFR Part 60 Subpart EEEE Standards of
Performance for Other Solid Waste Incineration Units for Which Construction is Commenced After
December 9, 2004, or for Which Modification or Reconstruction is Commenced on or After June 16, 2006
apply and limit VE to no more than 10%opacity per six-minute average.All six-minute averages during
testing were below 10 percent opacity.
ACI was operating at 95%capacity during testing. Representative testing is considered to be greater than
approximately 90%of maximum normal. The test conditions are acceptable.
The test results indicate compliance with applicable regulations. Subsequent annual opacity testing is
required no more than 12 calendar months following the date of the previous test. For questions or further
assistance with this test report review,please contact me at taylor.fortnncdenr.gov.
cc: IBEAM Documents - 1000127