AQ_F_0900066_20221129_EI_AERO-EI

This form is for Non-Title V facilities.If this facility is classified as Title V,please obtain and use the appropriate form
COPY of RECORD Date Submitted: 11/29/2022 12:32:16
Inventory Certification Form(Non-Title V)
Facility Name: Smithfield Hog Production- Bladenboro Feed Mill Facility ID : 0900066
255 Bryant Swamp Road Permit : 08155
Bladenboro,NC 28320 County : Bladen
DAQ Region : FRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory- Calendar Year 2021
These forms must be completed and returned even if the facility did not operate or emissions were zero
The legally defined "Responsible Official" of record for your facility is John Sargent
This person or one that meets the definition below must sign this certification form.
The official submitting the information must certify that he/she complies with the requirements as specified in Title I5A NCAC
2Q .03040)which define the responsible official as the following:
1. For corporations,by principal executive officer of at least the level of vice-president,or his duly authorized representative, if
such representative is responsible for overall operationof the facility from which the emissions described in the permit
application form originates
2. for partnership or limited partnership,by a general partner
3. for a sole proprietorship,by the proprietor
4. for municipal, state federal, or other public entity, by a principal executive officer, rankingelected official, or other duly
authorized employee
CERTIFICATION STATEMENT:
(Important:Legally Responsible Official,read and sign after all submissions are final.)
I certify that I am the responsible official for this facility, as described above, and hereby certify that the information contained in
this air emissions report, including attached calculations and documentation, is true, accurate and complete. (Subject to legal
penalties of up to $25,000 per occurrence and possible imprisonment as outlined in G.S. § 143-215.3(a)(2))
Responsible Official's Signature Below (use blue ink): Date Signed:
Printed Name: John Sargent
Signature:
This form applies to Non Title V facilities. If this facility is classified asTitle V,please telephone your regional office Emission
Inventory Contact at once for proper formsand classification.
Email address of Responsible Official: [e-mail]
Information on this Form cannot be held confidential
COPY of RECORD Date Submitted: 11/29/2022 12:32:16
1

COPY of RECORD Date Submitted: 11/29/2022 12:32:16
As entered in AERO
Facility Name: Smithfield Hog Production - Bladenboro Feed Mill Facility ID : 0900066
255 Bryant Swamp Road Permit : 08155
Bladenboro,NC 28320 County : Bladen
DAQ Region : FRO
Listing of Emission Sources and Control Devices on Permit. See instructions
*ES ID on *ES Description *CS ID *CS Description *CD ID's
Air Permit
ES-001 Truck grain receiving pit,and soft CS-5 bagfilter(900 square feet of filter area) CD-107
ingredients pit
bagfilter(300 square feet of filter area) ,
Receiving turnhead negative air bagfilter(300 square feet of filter area), CD-124,CD-422,
ES-002 system CS I bagfilter(300 square feet of filter area), CD-123,CD-218
bagfilter(300 square feet of filter area)
bagfilter(300 square feet of filter area),
Receiving turnhead negative air bagfilter(300 square feet of filter area), CD-124,CD-422,
ES-003 system CS- bagfilter(300 square feet of filter area), CD-123,CD-218
bagfilter(300 square feet of filter area)
ES-004 Pneumatic receiving system CS-3 bagfilter(200 square feet of filter area), CD-129,CD-133
bagfilter(200 square feet of filter area)
ES-005 Pneumatic receiving system CS-3 bagfilter(200 square feet of filter area), CD-129,CD-133
bagfilter(200 square feet of filter area)
ES-007a Hammer mill system(capacity: 53 CS-2 bagfilter(1,620 square feet of filter area), C 212
tons/hour) bagfilter(1,620 square feet of filter area)
ES-007b Hammer mill system(capacity: 53 CS-2 bagfilter(1,620 square feet of filter area), CD-212
tons/hour) bagfilter(1,620 square feet of filter area)
ES-008a Hammer mill system(capacity: 53 CS-2 bagfilter(1,620 square feet of filter area), CD-212
tons/hour) bagfilter(1,620 square feet of filter area)
ES-008b Hammer mill system(capacity: 53 CS-2 bagfilter(1,620 square feet of filter area), CD 212
tons/hour) bagfilter(1,620 square feet of filter area)
bagfilter(300 square feet of filter area),
ES-009 Ground grain negative air system CS-1 bagfilter(300 square feet of filter area), CD-124,CD-422,
bagfilter(300 square feet of filter area), CD-123,CD-218
bagfilter(300 square feet of filter area)
Three(3)cyclones installed in parallel(54
inches in diameter each),Three(3)cyclones
ES-010 Pelleting system(capacity: 60 CS-4 installed in parallel(54 inches in diameter CD-508,CD-608,
tons/hour) CD-708
each),Three(3)cyclones installed in parallel
(54 inches in diameter each)
Three(3)cyclones installed in parallel(54
inches in diameter each),Three(3)cyclones
ES-011 Pelleting system(capacity: 60 CS-4 installed in parallel(54 inches in diameter CD-508,CD-608,
tons/hour) CD-708
each),Three(3)cyclones installed in parallel
(54 inches in diameter each)
Three(3)cyclones installed in parallel(54
Pelleting system(capacity: 60 inches in diameter each),Three(3)cyclones CD-508,CD-608,
ES-012 tons/hour) CS-4 installed in parallel(54 inches in diameter CD-708
each),Three(3)cyclones installed in parallel
(54 inches in diameter each)
Natural gas/No.2 fuel oil-fired boiler
ES-013 (20.925 mmBtu/hr maximum heat
input)
2

Natural gas/No.2 fuel oil-fired boiler
ES-014 (20.925 mmBtu/hr maximum heat
input)
bagfilter(300 square feet of filter area),
Mixed feed turnhead negative air bagfilter(300 square feet of filter area), CD-124,CD-422,
ES-015 system ca aci 36 tons/hour CS 1 bagfilter 300 square feet of filter area , CD-123,CD-218
Y ( p tY� ) g ( q )
bagfilter(300 square feet of filter area)
Emergency Generator,No.2 fuel oil
fired,750 kW,Onan Model
ES-016 D970636382 and Serial 86930A,with
turbocharger and low temperature
aftercooler control devices.
ES-016a One(1)load-out system having
twenty(20)load-out bins
ES-016b One(1)load-out system having
twenty(20)load-out bins
ES-017 Rail Car Receiving
Truck grain receiving pit, 15,000
ES-018 bushels/hr max throughput,with
partially enclosed shelter
ES-019 Natural gas-fired grain dryer,47.8
mmBtu/hr maximum heat input
ES-020a Wet grain storage silo,55,000
bushels capacity
ES-020b Wet grain storage silo,55,000
bushels capacity
ES-021 Grain dryer truck loadout
IES-022 Bagging Operation
IES-023 Flat Storage Bagging System
IES-101 Storage Silos
IES-102 Storage Silos
IES-103 Storage Silos
IES-104 Storage Silos
IES-105a Storage Silos
IES-106 Storage Silos
IES-107 Storage Silos
IES-108 Storage Silos
U-ES-009b Ground grain negative air system CD CS-6 Ground Grain baghouse-218b, U-CD-218b
218b
3

COPY of RECORD Date Submitted: 11/29/2022 12:32:16
As entered in AERO
Facility Name: Smithfield Hog Production - Bladenboro Feed Mill Facility ID : 0900066
255 Bryant Swamp Road Permit : 08155
Bladenboro,NC 28320 County : Bladen
DAQ Region : FRO
Emission Source & Operating Scenario List- See Instructions
*ES Group ID *ES ID *OS ID *OS Description
GR2 ES-013,ES-014 2 Boilers-Natural Gas
GR3 ES-002,ES-003,ES-009, 16 Internal Grain and Ingredient Handling
ES-015
GR4 ES-016a,ES-016b 4 Product loadout
GR5 ES-007a,ES-007b,ES- 5 Hammermill
008a,ES-008b
GR6 ES-004,ES-005 6 Pneumatic receiving
GR7 ES-010,ES-011,ES-012 7 Pelleting System
GR9 ES-020a,ES-020b 20 Storage of wet grain prior to drying
IES-105a,IES-101,IES-
G-29 102,IES-103,IES-104,IES- 23 Grain Storage Silos
106,IES-107,IES-108
ES-001 8 Grain receiving by truck
ES-016 1 Generator
ES-017 11 Rail Receiving
ES-018 19 Receiving Pit for harvest grain dryer
ES-019 18 Grain dryer fans
17 Combustion of NG for grain drying
ES-021 21 Grain dryer truck loadout
13 Truck Hopper Bottom Receiving
IES-022 14 Bag Loading
15 Grain Loadout to Trailers
IES-023 22 NONE
26 Ground grain transfer handling system
U-ES-009b 24 NONE
25 NONE
4

COPY of RECORD Date Submitted: 11/29/2022 12:32:16
As entered in AERO
Facility Name: Smithfield Hog Production - Bladenboro Feed Mill Facility ID : 0900066
255 Bryant Swamp Road Permit : 08155
Bladenboro,NC 28320 County : Bladen
DAQ Region : FRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory- Calendar Year 2021
1.Emission Source ID (from permit) Group GR2 consisting of ES-013, ES-014
or Emission Source Group ID
2. Emission Source Description : Boilers (Natural gas/No. 2 fuel oil)
3. Operating Scenario ID/ OS - 2/Boilers -Natural Gas
Description:
4. SCC Number/Description: 10200602/Natural Gas ; 10-100 Million Btu/hr
5. Throughput/units in 2021: 88.21 E6FT3S/yr
(e.g.production or fuel use):
6. Fuel Information %Sulfur %Ash Heat Content
(If fuel is used) 0 0 1029 Btu/CF
(Btu/units)
7. Capture Efficiency
(%of Emissions from this Process Vented
to Control Device or Stack):
8. Control Device Information :None
Order CS-ID CD ID Control Device Description
(as listed in permit)
9.Emission Release Point(ERP)Information: (Sources vented to more than one ERP use additional entry lines):
ERP ID ERP Type Height Diameter Temperature Velocity Volume Flow ERP Description
(in feet) Circle(enter ft (F) (Feet/sec) Rate (Acfm)
Rectangle(L x W)
(in 0.1 feet)
VERTICAL
EP-014 STACK WITH 24 1.6 310 59.4 7165.84 Boiler Stack
RAIN CAP
VERTICAL
EP-013 STACK WITH 24 1.6 310 59.4 7165.84 Boiler Stack
RAIN CAP
5

Operating Scenario: OS - 2 Emission Source/Group ID: GR2
10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2021)
Hours per Day ( 7 ) Days per Week ( 7 ) Weeks per Year ( 52 )
11. Typical Start& End Times For Operating Scenario: Start: 0 End: 2359
12. Seasonal Periods Percent Annual Throughput:
Jan-Feb +Dec 25% March-May 25% June-Aug. 25% Sept.-Nov. 25%
2021 1 2021 1 2021 2021
13. Actual Emissions per Pollutant Listed :
Attach calculations and documentation of emission factors or other estimation methods used.
Emissions- Emission Control
GHG GHG Estimation Emission Ef
Pollutants CAS Efficiency
Pollutants Method Code ( Factor Control
(Tons/Year) (See Instructions) all controls)
2021
Criteria Emissions- Emission Control
(NAAQS) Pollutant Criteria Estimation Efficiency Emission Ef
Pollutants Code Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
CO CO 3.7 08
NOx NOx 4.41 08
TSP TSP 0.34 08
PM10 PM10 0.25 08
PM2.5 PM2.5 0.08 08
S02 S02 0.03 08
VOC VOC 0.24 08
Emissions Emission Control
HAP/TAP CAS Estimation Emission EF
(Pounds/Year) (Net after all controls)
Pollutants (In alphabetical order) (see instructions) HAP/TAPS Method Code Efficiency Factor Control
(See Instructions)
2021
Benzene 71-43-2 0.185 08
Formaldehyde 50-00-0 6.62 08
Hexane, n- 110-54-3 159 08
Naphthalene (Component 91-20-3 0.0538 08
of POMTV)
Toluene 108-88-3 0.3 08
6

COPY of RECORD Date Submitted: 11/29/2022 12:32:16
As entered in AERO
Facility Name: Smithfield Hog Production - Bladenboro Feed Mill Facility ID : 0900066
255 Bryant Swamp Road Permit : 08155
Bladenboro,NC 28320 County : Bladen
DAQ Region : FRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory- Calendar Year 2021
1.Emission Source ID (from permit) Group GR3 consisting of ES-002, ES-003, ES-009, ES-015
or Emission Source Group ID
2. Emission Source Description : Internal grain and ingredient handling
3. Operating Scenario ID/ OS - 16/Internal Grain and Ingredient Handling
Description:
4. SCC Number/Description: Not required by facility, will be completed by DAQ
5. Throughput/units in 2021: 553826 TON/yr
(e.g.production or fuel use):
6. Fuel Information %Sulfur %Ash Heat Content
(If fuel is used)
(Btu/units)
7. Capture Efficiency
(%of Emissions from this Process Vented 100
to Control Device or Stack):
8. Control Device Information
Order CS-ID CD ID Control Device Description
(as listed in permit)
1 CS-1 CD-124 Bagfilter(209 square feet of filter area)
2 CS-1 CD-422 Bagfilter(209 square feet of filter area)
3 CS-1 CD-123 Bagfilter(332 square feet of filter area)
4 CS-1 CD-218 Bagfilter(300 square feet of filter area)
7

Operating Scenario: OS - 16 Emission Source/Group ID: GR3
9.Emission Release Point(ERP)Information: (Sources vented to more than one ERP use additional entry lines):
ERP ID ERP Type Height Diameter Temperature Velocity Volume Flow ERP Description
(in feet) Circle(enter ft (F) (Feet/sec) Rate (Acfm)
Rectangle(L x W)
(in 0.1 feet)
EP-002 VERTICAL 174 1.04 72 58.8 2996.98 Receiving turnhead
STACK bagfilter No. 1
EP-003 VERTICAL 174 1.04 72 58.8 2996.98 Receiving turnhead
STACK bagfilter No. 2
VERTICAL Ground grain
EP-009 STACK 174 1.04 72 58.8 2996.98 turnhead baghouse
filter
VERTICAL Mixed feed
EP-015 STACK 174 1.04 72 58.8 2996.98 turnhead baghouse
filter
8

Operating Scenario: OS - 16 Emission Source/Group ID: GR3
10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2021)
Hours per Day ( 24 ) Days per Week ( 7 ) Weeks per Year ( 52 )
11.Typical Start&End Times For Operating Scenario: Start: 0 End: 2359
12. Seasonal Periods Percent Annual Throughput:
Jan-Feb + Dec 25% March-May 25% June-Aug. 25% Sept.-Nov. 25%
2021 2021 2021 2021
13. Actual Emissions per Pollutant Listed
Attach calculations and documentation of emission factors or other estimation methods used.
Emissions- Emission Control
GHG CAS GHG Estimation Efficiency Emission Ef
Pollutants Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
Criteria Emissions- Emission Control
Pollutant Emission Ef
(NAAQS) Criteria Estimation Efficiency
Pollutants Code Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
CO CO 08 0
NOx NOx 08 0
TSP TSP 1 0.17 08 99 0.061 BEFORE
PM10 PM10 0.09 08 99 0.034 BEFORE
PM2.5 PM2.5 0.02 08 99 0.0058 BEFORE
S02 S02 08 0
VOC VOC 08 0
Emission
HAP/TAP CAS Emissions Estimation Control Emission EF
Pollutants (In Alphabetical Order) (See instructions) HAP/TAPS Method Code Efficiency Factor Control
(Pounds/Year) (Net after all controls)
(See Instructions)
2021
9

COPY of RECORD Date Submitted: 11/29/2022 12:32:16
As entered in AERO
Facility Name: Smithfield Hog Production - Bladenboro Feed Mill Facility ID : 0900066
255 Bryant Swamp Road Permit : 08155
Bladenboro,NC 28320 County : Bladen
DAQ Region : FRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory- Calendar Year 2021
1.Emission Source ID (from permit) Group GR4 consisting of ES-016a, ES-016b
or Emission Source Group ID
2. Emission Source Description : Product loadout
3. Operating Scenario ID/ OS - 4/Product loadout
Description:
4. SCC Number/Description: 30200606/Feed and Grain Country Elevators ; Loading (Shipping)
5. Throughput/units in 2021: 640262 TON/yr
(e.g.production or fuel use):
6. Fuel Information %Sulfur %Ash Heat Content
(If fuel is used)
(Btu/units)
7. Capture Efficiency
(%of Emissions from this Process Vented
to Control Device or Stack):
8. Control Device Information :None
Order CS-ID CD ID Control Device Description
(as listed in permit)
9.Emission Release Point(ERP)Information: (Sources vented to more than one ERP use additional entry lines):
ERP ID ERP Type Height Diameter Temperature Velocity Volume Flow ERP Description
(in feet) Circle(enter ft (F) (Feet/sec) Rate (Acfm)
Rectangle(L x W)
(in 0.1 feet)
EP-016a FUGITIVE (NO 1 72 Area 1 Loadout Fugatives
STACK) No. 1
EP-016b FUGITIVE (NO 1 72 Area 1 Loadout Fugatives
STACK) No. 2
10

Operating Scenario: OS -4 Emission Source/Group ID: GR4
10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2021)
Hours per Day ( 23 ) Days per Week ( 6 ) Weeks per Year ( 52 )
11.Typical Start&End Times For Operating Scenario: Start: 0 End: 2359
12. Seasonal Periods Percent Annual Throughput:
Jan-Feb + Dec 25% March-May 25% June-Aug. 25% Sept.-Nov. 25%
2021 2021 2021 2021
13. Actual Emissions per Pollutant Listed
Attach calculations and documentation of emission factors or other estimation methods used.
Emissions- Emission Control
GHG CAS GHG Estimation Efficiency Emission Ef
Pollutants Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
Criteria Emissions- Emission Control
Pollutant Emission Ef
(NAAQS) Criteria Estimation Efficiency
Pollutants Code Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
CO CO 08
NOx NOx 08
TSP TSP 1 1.06 08 0.0033
PM10 PM10 0.26 08 0.0008
PM2.5 PM2.5 08
S02 S02 08
VOC VOC 08
Emission
HAP/TAP CAS Emissions Estimation Control Emission EF
Pollutants (In Alphabetical Order) (See instructions) HAP/TAPS Method Code Efficiency Factor Control
(Pounds/Year) (Net after all controls)
(See Instructions)
2021
11

COPY of RECORD Date Submitted: 11/29/2022 12:32:16
As entered in AERO
Facility Name: Smithfield Hog Production - Bladenboro Feed Mill Facility ID : 0900066
255 Bryant Swamp Road Permit : 08155
Bladenboro,NC 28320 County : Bladen
DAQ Region : FRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory- Calendar Year 2021
1.Emission Source ID (from permit) Group GR5 consisting of ES-007a, ES-007b, ES-008a, ES-008b
or Emission Source Group ID
2. Emission Source Description : Hammer mill
3. Operating Scenario ID/ OS - 5/Hammermill
Description:
4. SCC Number/Description: 30200817/Feed Manufacture ; Grain Milling: Hammermill
5. Throughput/units in 2021: 363502 TON/yr
(e.g.production or fuel use):
6. Fuel Information %Sulfur %Ash Heat Content
(If fuel is used)
(Btu/units)
7. Capture Efficiency
(%of Emissions from this Process Vented 100
to Control Device or Stack):
8. Control Device Information
Order CS-ID CD ID Control Device Description
(as listed in permit)
1 CS-2 CD-212 Airlanco Model 100AST10-II Bagfilter(1,640 sq. ft. of filter area)
9. Emission Release Point(ERP)Information: (Sources vented to more than one ERP use additional entry lines):
ERP ID ERP Type Height Diameter Temperature Velocity Volume Flow ERP Description
(in feet) Circle(enter ft (F) (Feet/sec) Rate (Acfm)
Rectangle(L x W)
(in 0.1 feet)
VERTICAL Hammermill
EP-007 STACK 35 1.55 78 68.4 7743.91 baghouse filter No.
1
VERTICAL Hammermill
EP-008 STACK 35 1.55 78 68.4 7743.91 jbaghouse filter No.
2
12

Operating Scenario: OS - 5 Emission Source/Group ID: GR5
10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2021)
Hours per Day ( 5 ) Days per Week ( 6 ) Weeks per Year ( 52 )
11.Typical Start&End Times For Operating Scenario: Start: 0 End: 2359
12. Seasonal Periods Percent Annual Throughput:
Jan-Feb + Dec 25% March-May 25% June-Aug. 25% Sept.-Nov. 25%
2021 2021 2021 2021
13. Actual Emissions per Pollutant Listed
Attach calculations and documentation of emission factors or other estimation methods used.
Emissions- Emission Control
GHG CAS GHG Estimation Efficiency Emission Ef
Pollutants Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
Criteria Emissions- Emission Control
Pollutant Emission Ef
(NAAQS) Criteria Estimation Efficiency
Pollutants Code Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
CO CO 08 0
NOx NOx 08 0
TSP TSP 2.18 08 99.5 0.012 AFTER
PM10 PM10 2.18 08 99.5 0.012 AFTER
PM2.5 PM2.5 08 0
S02 S02 08 0
VOC VOC 08 0
Emission
HAP/TAP CAS Emissions Estimation Control Emission EF
Pollutants (In Alphabetical Order) (See instructions) HAP/TAPS Method Code Efficiency Factor Control
(Pounds/Year) (Net after all controls)
(See Instructions)
2021
13

COPY of RECORD Date Submitted: 11/29/2022 12:32:16
As entered in AERO
Facility Name: Smithfield Hog Production - Bladenboro Feed Mill Facility ID : 0900066
255 Bryant Swamp Road Permit : 08155
Bladenboro,NC 28320 County : Bladen
DAQ Region : FRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory- Calendar Year 2021
1.Emission Source ID (from permit) Group GR6 consisting of ES-004, ES-005
or Emission Source Group ID
2. Emission Source Description : Pnumatic receiving
3. Operating Scenario ID/ OS - 6/Pneumatic receiving
Description:
4. SCC Number/Description: 30200530/Feed and Grain Terminal Elevators ; Headhouse & Internal
Handling (legs,belts, distributors, scale, etc.)
5. Throughput/units in 2021: 2510 TON/yr
(e.g.production or fuel use):
6. Fuel Information %Sulfur %Ash Heat Content
(If fuel is used)
(Btu/units)
7. Capture Efficiency
(%of Emissions from this Process Vented 100
to Control Device or Stack):
8. Control Device Information
Order CS-ID CD ID Control Device Description
(as listed in permit)
1 CS-3 CD-129 Bagfilter(200 square feet of filter area)
2 CS-3 CD-133 Bagfilter(200 square feet of filter area)
9.Emission Release Point(ERP)Information: (Sources vented to more than one EPP use additional entry lines):
ERP ID ERP Type Height Diameter Temperature Velocity Volume Flow ERP Description
(in feet) Circle(enter ft (F) (Feet/sec) Rate (Acfm)
Rectangle(L x W)
(in 0.1 feet)
VERTICAL Pnumatic receiving
EP-004 STACK 177 1.33 77 10.8 900.26 baghouse filter No.
1
VERTICAL Pnumatic receiving
EP-005 STACK 175 0.84 77 27.2 904.41 baghouse filter No.
2
14

15

Operating Scenario: OS - 6 Emission Source/Group ID: GR6
10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2021)
Hours per Day ( 1 ) Days per Week ( 3 ) Weeks per Year ( 52 )
11.Typical Start&End Times For Operating Scenario: Start: 0 End: 2359
12. Seasonal Periods Percent Annual Throughput:
Jan-Feb + Dec 25% March-May 25% June-Aug. 25% Sept.-Nov. 25%
2021 2021 2021 2021
13. Actual Emissions per Pollutant Listed
Attach calculations and documentation of emission factors or other estimation methods used.
Emissions- Emission Control
GHG CAS GHG Estimation Efficiency Emission Ef
Pollutants Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
Criteria Emissions- Emission Control
Pollutant Emission Ef
(NAAQS) Criteria Estimation Efficiency
Pollutants Code Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
CO CO 08 0
NOx NOx 08 0
TSP TSP 1 0 08 98.8 0.061 BEFORE
PM10 PM10 0 08 98.8 0.034 BEFORE
PM2.5 PM2.5 0 08 98.8 0.0058 BEFORE
S02 S02 08 0
VOC VOC 08 0
Emission
HAP/TAP CAS Emissions Estimation Control Emission EF
Pollutants (In Alphabetical Order) (See instructions) HAP/TAPS Method Code Efficiency Factor Control
(Pounds/Year) (Net after all controls)
(See Instructions)
2021
16

COPY of RECORD Date Submitted: 11/29/2022 12:32:16
As entered in AERO
Facility Name: Smithfield Hog Production - Bladenboro Feed Mill Facility ID : 0900066
255 Bryant Swamp Road Permit : 08155
Bladenboro,NC 28320 County : Bladen
DAQ Region : FRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory- Calendar Year 2021
1.Emission Source ID (from permit) Group GR7 consisting of ES-010, ES-011, ES-012
or Emission Source Group ID
2. Emission Source Description : Pelleting system
3. Operating Scenario ID/ OS - 7/Pelleting System
Description:
4. SCC Number/Description: 30200816/Feed Manufacture ; Pellet Coolers
5. Throughput/units in 2021: 640262 TON/yr
(e.g.production or fuel use):
6. Fuel Information %Sulfur %Ash Heat Content
(If fuel is used)
(Btu/units)
7. Capture Efficiency
(%of Emissions from this Process Vented 100
to Control Device or Stack):
8. Control Device Information
Order CS-ID CD ID Control Device Description
(as listed in permit)
1 CS-4 CD-508 Three (3) cyclones installed in parallel (54 inches in diameter each)
2 CS-4 CD-608 Three (3) cyclones installed in parallel (54 inches in diameter each)
3 CS-4 CD-708 Three (3) cyclones installed in parallel (54 inches in diameter each)
17

Operating Scenario: OS - 7 Emission Source/Group ID: GR7
9.Emission Release Point(ERP)Information: (Sources vented to more than one ERP use additional entry lines):
ERP ID ERP Type Height Diameter Temperature Velocity Volume Flow ERP Description
(in feet) Circle(enter ft (F) (Feet/sec) Rate (Acfm)
Rectangle(L x W)
(in 0.1 feet)
VERTICAL Pellet cooling
EP-011 STACK 49 4.23 97 60.6 51096.89 system cyclones
No. 2
VERTICAL Pellet cooling
EP-012 STACK 49 4.23 97 60.6 51096.89 system cyclones
No. 3
VERTICAL Pellet cooling
ES-010 STACK 49 4.23 97 60.6 51096.89 system cyclones
No. 1
18

Operating Scenario: OS - 7 Emission Source/Group ID: GR7
10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2021)
Hours per Day ( 11 ) Days per Week ( 6 ) Weeks per Year ( 52 )
11.Typical Start&End Times For Operating Scenario: Start: 0 End: 2359
12. Seasonal Periods Percent Annual Throughput:
Jan-Feb + Dec 25% March-May 25% June-Aug. 25% Sept.-Nov. 25%
2021 2021 2021 2021
13. Actual Emissions per Pollutant Listed
Attach calculations and documentation of emission factors or other estimation methods used.
Emissions- Emission Control
GHG CAS GHG Estimation Efficiency Emission Ef
Pollutants Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
Criteria Emissions- Emission Control
Pollutant Emission Ef
(NAAQS) Criteria Estimation Efficiency
Pollutants Code Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
CO CO 08 0
NOx NOx 08 0
TSP TSP 48.02 08 85 0.15 AFTER
PM10 PM10 24.01 08 40 0.075 AFTER
PM2.5 PM2.5 08
S02 S02 08 0
VOC VOC 08 0
Emission
HAP/TAP CAS Emissions Estimation Control Emission EF
Pollutants (In Alphabetical Order) (See instructions) HAP/TAPS Method Code Efficiency Factor Control
(Pounds/Year) (Net after all controls)
(See Instructions)
2021
19

COPY of RECORD Date Submitted: 11/29/2022 12:32:16
As entered in AERO
Facility Name: Smithfield Hog Production - Bladenboro Feed Mill Facility ID : 0900066
255 Bryant Swamp Road Permit : 08155
Bladenboro,NC 28320 County : Bladen
DAQ Region : FRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory- Calendar Year 2021
1.Emission Source ID (from permit) Group GR9 consisting of ES-020a, ES-020b
or Emission Source Group ID
2. Emission Source Description : Wet Grain Storage Silos
3. Operating Scenario ID/ OS - 20/Storage of wet grain prior to drying
Description:
4. SCC Number/Description: Not required by facility, will be completed by DAQ
5. Throughput/units in 2021: 55586 TON/yr
(e.g.production or fuel use):
6. Fuel Information %Sulfur %Ash Heat Content
(If fuel is used)
(Btu/units)
7. Capture Efficiency
(%of Emissions from this Process Vented
to Control Device or Stack):
8. Control Device Information :None
Order CS-ID CD ID Control Device Description
(as listed in permit)
9.Emission Release Point(ERP)Information: (Sources vented to more than one ERP use additional entry lines):
ERP ID ERP Type Height Diameter Temperature Velocity Volume Flow ERP Description
(in feet) Circle(enter ft (F) (Feet/sec) Rate (Acfm)
Rectangle(L x W)
(in 0.1 feet)
GOOSE NECK Wet rain silo
EP-20 73 4 72 0.5 376.99 g
11 STACK storage
20

Operating Scenario: OS - 20 Emission Source/Group ID: GR9
10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2021)
Hours per Day ( 12 ) Days per Week ( 7 ) Weeks per Year ( 10 )
11.Typical Start&End Times For Operating Scenario: Start: 0 End: 2359
12. Seasonal Periods Percent Annual Throughput:
Jan-Feb + Dec March-May jJune-Aug. Set Nov.
2021 0% ar 0% 2021 50% 12021' 50%
13. Actual Emissions per Pollutant Listed
Attach calculations and documentation of emission factors or other estimation methods used.
Emissions- Emission Control
GHG CAS GHG Estimation Efficiency Emission Ef
Pollutants Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
Criteria Emissions- Emission Control
Pollutant Emission Ef
(NAAQS) Criteria Estimation Efficiency
Pollutants Code Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
CO CO 08
NOx NOx 08
TSP TSP 1 0.69 08 0.025
PM10 PM10 0.18 08 0.0063
PM2.5 PM2.5 0.03 08 0.0011
S02 S02 08
VOC VOC 08
Emission
HAP/TAP CAS Emissions Estimation Control Emission EF
Pollutants (In Alphabetical Order) (See instructions) HAP/TAPS Method Code Efficiency Factor Control
(Pounds/Year) (Net after all controls)
(See Instructions)
2021
21

COPY of RECORD Date Submitted: 11/29/2022 12:32:16
As entered in AERO
Facility Name: Smithfield Hog Production - Bladenboro Feed Mill Facility ID : 0900066
255 Bryant Swamp Road Permit : 08155
Bladenboro,NC 28320 County : Bladen
DAQ Region : FRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory- Calendar Year 2021
1.Emission Source ID (from permit) Group G-29 consisting of IES-105a, IES-101, IES-102, IES-103, IES-
or Emission Source Group ID 104, IES-106, IES-107, IES-108
2. Emission Source Description : Grain Storage Silos
3. Operating Scenario ID/ OS - 23/Grain Storage Silos
Description:
4. SCC Number/Description: Not required by facility, will be completed by DAQ
5. Throughput/units in 2021: 363502 TON/yr
(e.g.production or fuel use):
6. Fuel Information %Sulfur %Ash Heat Content
(If fuel is used)
(Btu/units)
7. Capture Efficiency
(%of Emissions from this Process Vented
to Control Device or Stack):
8. Control Device Information :None
Order CS-ID CD ID Control Device Description
(as listed in permit)
9. Emission Release Point(ERP)Information: (Sources vented to more than one ERP use additional entry lines):
ERP ID ERP Type Height Diameter Temperature Velocity Volume Flow ERP Description
(in feet) Circle(enter ft (F) (Feet/sec) Rate (Acfm)
Rectangle(L x W)
(in 0.1 feet)
EP-18 FUGITIVE (NO 1 72 Area 1 Grain Silos-
STACK) I I I I 1 1 fugitive (Rep)
22

Operating Scenario: OS - 23 Emission Source/Group ID: G-29
10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2021)
Hours per Day ( 24 ) Days per Week ( 7 ) Weeks per Year ( 52 )
11.Typical Start&End Times For Operating Scenario: Start: 0 End: 2359
12. Seasonal Periods Percent Annual Throughput:
Jan-Feb + Dec 25% March-May 25% June-Aug. 25% Sept.-Nov. 25%
2021 2021 2021 2021
13. Actual Emissions per Pollutant Listed
Attach calculations and documentation of emission factors or other estimation methods used.
Emissions- Emission Control
GHG CAS GHG Estimation Efficiency Emission Ef
Pollutants Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
Criteria Emissions- Emission Control
Pollutant Emission Ef
(NAAQS) Criteria Estimation Efficiency
Pollutants Code Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
CO CO 08
NOx NOx 08
TSP TSP 1 4.54 08 0.025
PM10 PM10 1.15 08 0.0063
PM2.5 PM2.5 0.2 08 0.0011
S02 S02 08
VOC VOC 08
Emission
HAP/TAP CAS Emissions Estimation Control Emission EF
Pollutants (In Alphabetical Order) (See instructions) HAP/TAPS Method Code Efficiency Factor Control
(Pounds/Year) (Net after all controls)
(See Instructions)
2021
23

COPY of RECORD Date Submitted: 11/29/2022 12:32:16
As entered in AERO
Facility Name: Smithfield Hog Production - Bladenboro Feed Mill Facility ID : 0900066
255 Bryant Swamp Road Permit : 08155
Bladenboro,NC 28320 County : Bladen
DAQ Region : FRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory- Calendar Year 2021
1.Emission Source ID (from permit) ES-001
or Emission Source Group ID
2. Emission Source Description : Truck grain receiving pit, and soft ingredients pit
3. Operating Scenario ID/ OS - 8/Grain receiving by truck
Description:
4. SCC Number/Description: 30200552/Feed and Grain Terminal Elevators ; Unloading (Receiving) from
Hopper Trucks
5. Throughput/units in 2021: 473819 TON/yr
(e.g.production or fuel use):
6. Fuel Information %Sulfur %Ash Heat Content
(If fuel is used)
(Btu/units)
7. Capture Efficiency
(%of Emissions from this Process Vented 100
to Control Device or Stack):
8. Control Device Information
Order CS-ID CD ID Control Device Description
(as listed in permit)
1 CS-5 CD-107 Bagfilter (850 square feet of filter area)
9. Emission Release Point(ERP)Information: (Sources vented to more than one EPP use additional entry lines):
ERP ID ERP Type Height Diameter Temperature Velocity Volume Flow ERP Description
(in feet) Circle(enter ft (F) (Feet/sec) Rate (Acfm)
Rectangle(L x W)
(in 0.1 feet)
VERTICAL Truck grain
EP-001 STACK 35 1.55 72 79.4 8989.28 receiving bagfilter
24

Operating Scenario: OS - 8 Emission Source/Group ID: ES-001
10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2021)
Hours per Day ( 13 ) Days per Week ( 6 ) Weeks per Year ( 52 )
11.Typical Start&End Times For Operating Scenario: Start: 0 End: 2359
12. Seasonal Periods Percent Annual Throughput:
Jan-Feb + Dec 25% March-May 25% June-Aug. 25% Sept.-Nov. 25%
2021 2021 2021 2021
13. Actual Emissions per Pollutant Listed
Attach calculations and documentation of emission factors or other estimation methods used.
Emissions- Emission Control
GHG CAS GHG Estimation Efficiency Emission Ef
Pollutants Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
Criteria Emissions- Emission Control
Pollutant Emission Ef
(NAAQS) Criteria Estimation Efficiency
Pollutants Code Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
CO CO 08 0
NOx NOx 08 0
TSP TSP 1 0.01 08 99.85 0.035 BEFORE
PM10 PM10 0 08 99.85 0.0078 BEFORE
PM2.5 PM2.5 0 08 99.85 0.0013 BEFORE
S02 S02 08 0
VOC VOC 08 0
Emission
HAP/TAP CAS Emissions Estimation Control Emission EF
Pollutants (In Alphabetical Order) (See instructions) HAP/TAPS Method Code Efficiency Factor Control
(Pounds/Year) (Net after all controls)
(See Instructions)
2021
25

COPY of RECORD Date Submitted: 11/29/2022 12:32:16
As entered in AERO
Facility Name: Smithfield Hog Production - Bladenboro Feed Mill Facility ID : 0900066
255 Bryant Swamp Road Permit : 08155
Bladenboro,NC 28320 County : Bladen
DAQ Region : FRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory- Calendar Year 2021
1.Emission Source ID (from permit) ES-016
or Emission Source Group ID
2. Emission Source Description : Emergency Generator,No. 2 fuel oil fired, 750 kW, Onan Model
D970636382 and Serial 86930A, with turbocharger and low temperature
aftercooler control devices.
3. Operating Scenario ID/ OS - 1/Generator
Description:
4. SCC Number/Description: 20200102/Distillate Oil (Diesel) ; Reciprocating
5. Throughput/units in 2021:
(e.g.production or fuel use):
6. Fuel Information %Sulfur %Ash Heat Content
(If fuel is used)
(Btu/units)
7. Capture Efficiency
(%of Emissions from this Process Vented
to Control Device or Stack):
8. Control Device Information :None
Order CS-ID CD ID Control Device Description
(as listed in permit)
9. Emission Release Point(ERP)Information: (Sources vented to more than one ERP use additional entry lines):
ERP ID ERP Type Height Diameter Temperature Velocity Volume Flow ERP Description
(in feet) Circle(enter ft (F) (Feet/sec) Rate (Acfm)
Rectangle(L x W)
(in 0.1 feet)
EP-016 VERTICAL 10 0.75 928 560 14844.02 Generator Stack
STACK
26

Operating Scenario: OS - 1 Emission Source/Group ID: ES-016
10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2021)
Hours per Day ( 24 ) Days per Week ( 7 ) Weeks per Year ( 52 )
11.Typical Start&End Times For Operating Scenario: Start: 0 End: 2359
12. Seasonal Periods Percent Annual Throughput:
Jan-Feb + Dec 25% March-May 25% June-Aug. 25% Sept.-Nov. 25%
2021 2021 2021 2021
13. Actual Emissions per Pollutant Listed
Attach calculations and documentation of emission factors or other estimation methods used.
Emissions- Emission Control
GHG CAS GHG Estimation Efficiency Emission Ef
Pollutants Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
Criteria Emissions- Emission Control
Pollutant Emission Ef
(NAAQS) Criteria Estimation Efficiency
Pollutants Code Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
CO CO 08
NOx NOx 08
TSP TSP 08
PM10 PM10 08
PM2.5 PM2.5 08
S02 S02 08
VOC VOC 08
Emission
HAP/TAP CAS Emissions Estimation Control Emission EF
Pollutants (In Alphabetical Order) (See instructions) HAP/TAPS Method Code Efficiency Factor Control
(Pounds/Year) (Net after all controls)
(See Instructions)
2021
27

COPY of RECORD Date Submitted: 11/29/2022 12:32:16
As entered in AERO
Facility Name: Smithfield Hog Production - Bladenboro Feed Mill Facility ID : 0900066
255 Bryant Swamp Road Permit : 08155
Bladenboro,NC 28320 County : Bladen
DAQ Region : FRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory- Calendar Year 2021
1.Emission Source ID (from permit) ES-017
or Emission Source Group ID
2. Emission Source Description : Rail Car Receiving
3. Operating Scenario ID/ OS - I I/Rail Receiving
Description:
4. SCC Number/Description: 30200553/Feed and Grain Terminal Elevators ; Unloading (Receiving) from
Railcars
5. Throughput/units in 2021: 87696 TON/yr
(e.g.production or fuel use):
6. Fuel Information %Sulfur %Ash Heat Content
(If fuel is used)
(Btu/units)
7. Capture Efficiency
(%of Emissions from this Process Vented
to Control Device or Stack):
8. Control Device Information :None
Order CS-ID CD ID Control Device Description
(as listed in permit)
9. Emission Release Point(ERP)Information: (Sources vented to more than one ERP use additional entry lines):
ERP ID ERP Type Height Diameter Temperature Velocity Volume Flow ERP Description
(in feet) Circle(enter ft (F) (Feet/sec) Rate (Acfm)
Rectangle(L x W)
(in 0.1 feet)
FUGITIVE (NO Rail receiving
EP-017 STACK) 1 72 Area 1 f igatives
28

Operating Scenario: OS - 11 Emission Source/Group ID: ES-017
10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2021)
Hours per Day ( 3 ) Days per Week ( 6 ) Weeks per Year ( 52 )
11.Typical Start&End Times For Operating Scenario: Start: 0 End: 2359
12. Seasonal Periods Percent Annual Throughput:
Jan-Feb + Dec 25% March-May 25% June-Aug. 25% Sept.-Nov. 25%
2021 2021 2021 2021
13. Actual Emissions per Pollutant Listed
Attach calculations and documentation of emission factors or other estimation methods used.
Emissions- Emission Control
GHG CAS GHG Estimation Efficiency Emission Ef
Pollutants Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
Criteria Emissions- Emission Control
Pollutant Emission Ef
(NAAQS) Criteria Estimation Efficiency
Pollutants Code Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
CO CO 08
NOx NOx 08
TSP TSP 1 1.4 08 0.032
PM10 PM10 0.34 08 0.0078
PM2.5 PM2.5 0.06 08 0.0013
S02 S02 08
VOC VOC 08
Emission
HAP/TAP CAS Emissions Estimation Control Emission EF
Pollutants (In Alphabetical Order) (See instructions) HAP/TAPS Method Code Efficiency Factor Control
(Pounds/Year) (Net after all controls)
(See Instructions)
2021
29

COPY of RECORD Date Submitted: 11/29/2022 12:32:16
As entered in AERO
Facility Name: Smithfield Hog Production - Bladenboro Feed Mill Facility ID : 0900066
255 Bryant Swamp Road Permit : 08155
Bladenboro,NC 28320 County : Bladen
DAQ Region : FRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory- Calendar Year 2021
1.Emission Source ID (from permit) ES-018
or Emission Source Group ID
2. Emission Source Description : Truck grain receiving pit, 15,000 bushels/hr max throughput, with
partially enclosed shelter
3. Operating Scenario ID/ OS - 19/Receiving Pit for harvest grain dryer
Description:
4. SCC Number/Description: Not required by facility, will be completed by DAQ
5. Throughput/units in 2021: 55586 TON/yr
(e.g.production or fuel use):
6. Fuel Information %Sulfur %Ash Heat Content
(If fuel is used)
(Btu/units)
7. Capture Efficiency
(%of Emissions from this Process Vented
to Control Device or Stack):
8. Control Device Information :None
Order CS-ID CD ID Control Device Description
(as listed in permit)
9. Emission Release Point(ERP)Information: (Sources vented to more than one ERP use additional entry lines):
ERP ID ERP Type Height Diameter Temperature Velocity Volume Flow ERP Description
(in feet) Circle(enter ft (F) (Feet/sec) Rate (Acfm)
Rectangle(L x W)
(in 0.1 feet)
EP-18 FUGITIVE (NO Grain dryer truck
11 gd STACK) 9 72 Area= 64 receiving pit
30

Operating Scenario: OS - 19 Emission Source/Group ID: ES-018
10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2021)
Hours per Day ( 12 ) Days per Week ( 7 ) Weeks per Year ( 10 )
11.Typical Start&End Times For Operating Scenario: Start: 0 End: 2359
12. Seasonal Periods Percent Annual Throughput:
Jan-Feb + Dec March-May jJune-Aug. Set Nov.
2021 0% ar 0% 2021 50% 12021' 50%
13. Actual Emissions per Pollutant Listed
Attach calculations and documentation of emission factors or other estimation methods used.
Emissions- Emission Control
GHG CAS GHG Estimation Efficiency Emission Ef
Pollutants Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
Criteria Emissions- Emission Control
Pollutant Emission Ef
(NAAQS) Criteria Estimation Efficiency
Pollutants Code Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
CO CO 08
NOx NOx 08
TSP TSP 9.73 08 0.35
PM10 PM10 0.22 08 0.0078
PM2.5 PM2.5 0.04 08 0.0013
S02 S02 08
VOC VOC 08
Emission
HAP/TAP CAS Emissions Estimation Control Emission EF
Pollutants (In Alphabetical Order) (See instructions) HAP/TAPS Method Code Efficiency Factor Control
(Pounds/Year) (Net after all controls)
(See Instructions)
2021
31

COPY of RECORD Date Submitted: 11/29/2022 12:32:16
As entered in AERO
Facility Name: Smithfield Hog Production - Bladenboro Feed Mill Facility ID : 0900066
255 Bryant Swamp Road Permit : 08155
Bladenboro,NC 28320 County : Bladen
DAQ Region : FRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory- Calendar Year 2021
1.Emission Source ID (from permit) ES-019
or Emission Source Group ID
2. Emission Source Description : Natural gas-fired grain dryer, 47.8 mmBtu/hr maximum heat input
3. Operating Scenario ID/ OS - 18/Grain dryer fans
Description:
4. SCC Number/Description: Not required by facility, will be completed by DAQ
5. Throughput/units in 2021: 49986 TON/yr
(e.g.production or fuel use):
6. Fuel Information %Sulfur %Ash Heat Content
(If fuel is used)
(Btu/units)
7. Capture Efficiency
(%of Emissions from this Process Vented
to Control Device or Stack):
8. Control Device Information :None
Order CS-ID CD ID Control Device Description
(as listed in permit)
9.Emission Release Point(ERP)Information: (Sources vented to more than one ERP use additional entry lines):
ERP ID ERP Type Height Diameter Temperature Velocity Volume Flow ERP Description
(in feet) Circle(enter ft (F) (Feet/sec) Rate (Acfm)
Rectangle(L x W)
(in 0.1 feet)
EP-019 VERTICAL grain dryer
PM STACK �0 15 100 20 212057.5 particulate matter
32

Operating Scenario: OS - 18 Emission Source/Group ID: ES-019
10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2021)
Hours per Day ( 12 ) Days per Week ( 7 ) Weeks per Year ( 10 )
11.Typical Start&End Times For Operating Scenario: Start: 0 End: 2359
12. Seasonal Periods Percent Annual Throughput:
Jan-Feb + Dec March-May jJune-Aug. Set Nov.
2021 0% ar 0% 2021 50% 12021' 50%
13. Actual Emissions per Pollutant Listed
Attach calculations and documentation of emission factors or other estimation methods used.
Emissions- Emission Control
GHG CAS GHG Estimation Efficiency Emission Ef
Pollutants Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
Criteria Emissions- Emission Control
Pollutant Emission Ef
(NAAQS) Criteria Estimation Efficiency
Pollutants Code Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
CO CO 08
NOx NOx 08
TSP TSP 1 5.5 08 0.22
PM10 PM10 1.37 08 0.055
PM2.5 PM2.5 0.23 08 0.0094
S02 S02 08
VOC VOC 08
Emission
HAP/TAP CAS Emissions Estimation Control Emission EF
Pollutants (In Alphabetical Order) (See instructions) HAP/TAPS Method Code Efficiency Factor Control
(Pounds/Year) (Net after all controls)
(See Instructions)
2021
33

COPY of RECORD Date Submitted: 11/29/2022 12:32:16
As entered in AERO
Facility Name: Smithfield Hog Production - Bladenboro Feed Mill Facility ID : 0900066
255 Bryant Swamp Road Permit : 08155
Bladenboro,NC 28320 County : Bladen
DAQ Region : FRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory- Calendar Year 2021
1.Emission Source ID (from permit) ES-019
or Emission Source Group ID
2. Emission Source Description : Natural gas-fired grain dryer, 47.8 mmBtu/hr maximum heat input
3. Operating Scenario ID/ OS - 17/Combustion of NG for grain drying
Description:
4. SCC Number/Description: Not required by facility, will be completed by DAQ
5. Throughput/units in 2021: 8946 E6BTU/yr
(e.g.production or fuel use):
6. Fuel Information %Sulfur %Ash Heat Content
(If fuel is used)
(Btu/units)
7. Capture Efficiency
(%of Emissions from this Process Vented
to Control Device or Stack):
8. Control Device Information :None
Order CS-ID CD ID Control Device Description
(as listed in permit)
9.Emission Release Point(ERP)Information: (Sources vented to more than one ERP use additional entry lines):
ERP ID ERP Type Height Diameter Temperature Velocity Volume Flow ERP Description
(in feet) Circle(enter ft (F) (Feet/sec) Rate (Acfm)
Rectangle(L x W)
(in 0.1 feet)
EP-006 FUGITIVE (NO 1 130 Area 1 Grain drier stack-
STACK) I natural gas
34

Operating Scenario: OS - 17 Emission Source/Group ID: ES-019
10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2021)
Hours per Day ( 12 ) Days per Week ( 7 ) Weeks per Year ( 10 )
11. Typical Start& End Times For Operating Scenario: Start: 0 End: 2359
12. Seasonal Periods Percent Annual Throughput:
Jan-Feb +Dec 0% March-May 1 0% June-Aug. 50% Sept.-Nov. 50%
2021 1 2021 2021 2021
13. Actual Emissions per Pollutant Listed
Attach calculations and documentation of emission factors or other estimation methods used.
Emissions- Emission Control
GHG GHG Estimation Emission Ef
Pollutants CAS Efficiency
Pollutants Method Code ( Factor Control
(Tons/Year) (See Instructions) all controls)
2021
Criteria Emissions- Emission Control
(NAAQS) Pollutant Criteria Estimation Efficiency Emission Ef
Pollutants Code Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
CO CO 0.11 08 0.024
NOx NOx 0.75 08 0.167
TSP TSP 0.03 08 0.007
PM10 PM10 0.03 08 0.006
PM2.5 PM2.5 0.01 08 0.002
S02 S02 0 08 0.001
VOC VOC 0.02 08 0.005
Emissions Emission Control
HAP/TAP CAS Estimation Emission EF
(Pounds/Year) (Net after all controls)
Pollutants (In alphabetical order) (see instructions) HAP/TAPS Method Code Efficiency Factor Control
(See Instructions)
2021
Benzene 71-43-2 0.01843 08 0.00000206
Formaldehyde 50-00-0 0.65753 08 0.0000735
Hexane, n- 110-54-3 15.74496 08 0.00176
Toluene 108-88-3 0.02979 08 0.00000333
35

COPY of RECORD Date Submitted: 11/29/2022 12:32:16
As entered in AERO
Facility Name: Smithfield Hog Production - Bladenboro Feed Mill Facility ID : 0900066
255 Bryant Swamp Road Permit : 08155
Bladenboro,NC 28320 County : Bladen
DAQ Region : FRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory- Calendar Year 2021
1.Emission Source ID (from permit) ES-021
or Emission Source Group ID
2. Emission Source Description : Grain dryer truck loadout
3. Operating Scenario ID/ OS - 21/Grain dryer truck loadout
Description:
4. SCC Number/Description: Not required by facility, will be completed by DAQ
5. Throughput/units in 2021: 21035 TON/yr
(e.g.production or fuel use):
6. Fuel Information %Sulfur %Ash Heat Content
(If fuel is used)
(Btu/units)
7. Capture Efficiency
(%of Emissions from this Process Vented
to Control Device or Stack):
8. Control Device Information :None
Order CS-ID CD ID Control Device Description
(as listed in permit)
9.Emission Release Point(ERP)Information: (Sources vented to more than one ERP use additional entry lines):
ERP ID ERP Type Height Diameter Temperature Velocity Volume Flow ERP Description
(in feet) Circle(enter ft (F) (Feet/sec) Rate (Acfm)
Rectangle(L x W)
(in 0.1 feet)
EP-21 FUGITIVE (NO 9 72 Area= 64 Grain dryer load
STACK) out
36

Operating Scenario: OS - 21 Emission Source/Group ID: ES-021
10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2021)
Hours per Day ( 12 ) Days per Week ( 7 ) Weeks per Year ( 10 )
11.Typical Start&End Times For Operating Scenario: Start: 0 End: 2359
12. Seasonal Periods Percent Annual Throughput:
Jan-Feb + Dec March-May jJune-Aug. Set Nov.
2021 0% ar 0% 2021 50% 12021' 50%
13. Actual Emissions per Pollutant Listed
Attach calculations and documentation of emission factors or other estimation methods used.
Emissions- Emission Control
GHG CAS GHG Estimation Efficiency Emission Ef
Pollutants Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
Criteria Emissions- Emission Control
Pollutant Emission Ef
(NAAQS) Criteria Estimation Efficiency
Pollutants Code Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
CO CO 08
NOx NOx 08
TSP TSP 0.26 08 0.025
PM10 PM10 0.07 08 0.0063
PM2.5 PM2.5 0.01 08 0.0011
S02 S02 08
VOC VOC 08
Emission
HAP/TAP CAS Emissions Estimation Control Emission EF
Pollutants (In Alphabetical Order) (See instructions) HAP/TAPS Method Code Efficiency Factor Control
(Pounds/Year) (Net after all controls)
(See Instructions)
2021
37

COPY of RECORD Date Submitted: 11/29/2022 12:32:16
As entered in AERO
Facility Name: Smithfield Hog Production - Bladenboro Feed Mill Facility ID : 0900066
255 Bryant Swamp Road Permit : 08155
Bladenboro,NC 28320 County : Bladen
DAQ Region : FRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory- Calendar Year 2021
1.Emission Source ID (from permit) IES-022
or Emission Source Group ID
2. Emission Source Description : Bagging Operation
3. Operating Scenario ID/ OS - 13/Truck Hopper Bottom Receiving
Description:
4. SCC Number/Description: 30200552/Feed and Grain Terminal Elevators ; Unloading (Receiving) from
Hopper Trucks
5. Throughput/units in 2021: 30800 TON/yr
(e.g.production or fuel use):
6. Fuel Information %Sulfur %Ash Heat Content
(If fuel is used)
(Btu/units)
7. Capture Efficiency
(%of Emissions from this Process Vented
to Control Device or Stack):
8. Control Device Information :None
Order CS-ID CD ID Control Device Description
(as listed in permit)
9. Emission Release Point(ERP)Information: (Sources vented to more than one ERP use additional entry lines):
ERP ID ERP Type Height Diameter Temperature Velocity Volume Flow ERP Description
(in feet) Circle(enter ft (F) (Feet/sec) Rate (Acfm)
Rectangle(L x W)
(in 0.1 feet)
FUGITIVE (NO unloading of
022a STACK) 1 72 Area 1 hopper truck
38

Operating Scenario: OS - 13 Emission Source/Group ID: IES-022
10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2021)
Hours per Day ( 6 ) Days per Week ( 5 ) Weeks per Year ( 10 )
11.Typical Start&End Times For Operating Scenario: Start: 0 End: 2359
12. Seasonal Periods Percent Annual Throughput:
Jan-Feb + Dec 0% Parch-May 0% June-Aug. 25o/a Sept.-Nov. �So�o
2021 21 2021 2021
13. Actual Emissions per Pollutant Listed
Attach calculations and documentation of emission factors or other estimation methods used.
Emissions- Emission Control
GHG CAS GHG Estimation Efficiency Emission Ef
Pollutants Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
Criteria Emissions- Emission Control
Pollutant Emission Ef
(NAAQS) Criteria Estimation Efficiency
Pollutants Code Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
CO CO 08
NOx NOx 08
TSP TSP 1 0.54 08 0.035
PM10 PM10 0.12 08 0.0078
PM2.5 PM2.5 0.02 08 0.0013
S02 S02 08
VOC VOC 08
Emission
HAP/TAP CAS Emissions Estimation Control Emission EF
Pollutants (In Alphabetical Order) (See instructions) HAP/TAPS Method Code Efficiency Factor Control
(Pounds/Year) (Net after all controls)
(See Instructions)
2021
39

COPY of RECORD Date Submitted: 11/29/2022 12:32:16
As entered in AERO
Facility Name: Smithfield Hog Production - Bladenboro Feed Mill Facility ID : 0900066
255 Bryant Swamp Road Permit : 08155
Bladenboro,NC 28320 County : Bladen
DAQ Region : FRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory- Calendar Year 2021
1.Emission Source ID (from permit) IES-022
or Emission Source Group ID
2. Emission Source Description : Bagging Operation
3. Operating Scenario ID/ OS - 14/Bag Loading
Description:
4. SCC Number/Description: 30200540/Feed and Grain Terminal Elevators ; Storage Bin Vents
5. Throughput/units in 2021: 30800 TON/yr
(e.g.production or fuel use):
6. Fuel Information %Sulfur %Ash Heat Content
(If fuel is used)
(Btu/units)
7. Capture Efficiency
(%of Emissions from this Process Vented
to Control Device or Stack):
8. Control Device Information :None
Order CS-ID CD ID Control Device Description
(as listed in permit)
9.Emission Release Point(ERP)Information: (Sources vented to more than one ERP use additional entry lines):
ERP ID ERP Type Height Diameter Temperature Velocity Volume Flow ERP Description
(in feet) Circle(enter ft (F) (Feet/sec) Rate (Acfm)
Rectangle(L x W)
(in 0.1 feet)
022c FUGITIVE (NO 2 72 Area 3 Bag system loading
STACK)
40

Operating Scenario: OS - 14 Emission Source/Group ID: IES-022
10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2021)
Hours per Day ( 6 ) Days per Week ( 5 ) Weeks per Year ( 10 )
11.Typical Start&End Times For Operating Scenario: Start: 0 End: 2359
12. Seasonal Periods Percent Annual Throughput:
Jan-Feb + Dec 0% Parch-May 0% June-Aug. 25o/a Sept.-Nov. �So�o
2021 21 2021 2021
13. Actual Emissions per Pollutant Listed
Attach calculations and documentation of emission factors or other estimation methods used.
Emissions- Emission Control
GHG CAS GHG Estimation Efficiency Emission Ef
Pollutants Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
Criteria Emissions- Emission Control
Pollutant Emission Ef
(NAAQS) Criteria Estimation Efficiency
Pollutants Code Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
CO CO 08
NOx NOx 08
TSP TSP 1 0.39 08 0.025
PM10 PM10 0.1 08 0.0063
PM2.5 PM2.5 08
S02 S02 08
VOC VOC 08
Emission
HAP/TAP CAS Emissions Estimation Control Emission EF
Pollutants (In Alphabetical Order) (See instructions) HAP/TAPS Method Code Efficiency Factor Control
(Pounds/Year) (Net after all controls)
(See Instructions)
2021
41

COPY of RECORD Date Submitted: 11/29/2022 12:32:16
As entered in AERO
Facility Name: Smithfield Hog Production - Bladenboro Feed Mill Facility ID : 0900066
255 Bryant Swamp Road Permit : 08155
Bladenboro,NC 28320 County : Bladen
DAQ Region : FRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory- Calendar Year 2021
1.Emission Source ID (from permit) IES-022
or Emission Source Group ID
2. Emission Source Description : Bagging Operation
3. Operating Scenario ID/ OS - 15/Grain Loadout to Trailers
Description:
4. SCC Number/Description: 30200532/Feed and Grain Terminal Elevators ; Fugitive Emissions:
Shipping/Receiving
5. Throughput/units in 2021: 26600 TON/yr
(e.g.production or fuel use):
6. Fuel Information %Sulfur %Ash Heat Content
(If fuel is used)
(Btu/units)
7. Capture Efficiency
(%of Emissions from this Process Vented
to Control Device or Stack):
8. Control Device Information :None
Order CS-ID CD ID Control Device Description
(as listed in permit)
9. Emission Release Point(ERP)Information: (Sources vented to more than one ERP use additional entry lines):
ERP ID ERP Type Height Diameter Temperature Velocity Volume Flow ERP Description
(in feet) Circle(enter ft (F) (Feet/sec) Rate (Acfm)
Rectangle(L x W)
(in 0.1 feet)
FUGITIVE (NO Discharge spout on
022d STACK) 1 72 Area= 1 bagging harvest
system
42

Operating Scenario: OS - 15 Emission Source/Group ID: IES-022
10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2021)
Hours per Day ( 8 ) Days per Week ( 6 ) Weeks per Year ( 2 )
11.Typical Start&End Times For Operating Scenario: Start: 0 End: 2359
12. Seasonal Periods Percent Annual Throughput:
Jan-Feb + Dec 0% Parch-May 0% June-Aug. 0% Sept.-Nov. 100%
2021 21 2021 2021
13. Actual Emissions per Pollutant Listed
Attach calculations and documentation of emission factors or other estimation methods used.
Emissions- Emission Control
GHG CAS GHG Estimation Efficiency Emission Ef
Pollutants Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
Criteria Emissions- Emission Control
Pollutant Emission Ef
(NAAQS) Criteria Estimation Efficiency
Pollutants Code Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
CO CO 08
NOx NOx 08
TSP TSP 1 0.04 08 0.0033
PM10 PM10 0.01 08 0.0008
PM2.5 PM2.5 08
S02 S02 08
VOC VOC 08
Emission
HAP/TAP CAS Emissions Estimation Control Emission EF
Pollutants (In Alphabetical Order) (See instructions) HAP/TAPS Method Code Efficiency Factor Control
(Pounds/Year) (Net after all controls)
(See Instructions)
2021
43

COPY of RECORD Date Submitted: 11/29/2022 12:32:16
As entered in AERO
Facility Name: Smithfield Hog Production - Bladenboro Feed Mill Facility ID : 0900066
255 Bryant Swamp Road Permit : 08155
Bladenboro,NC 28320 County : Bladen
DAQ Region : FRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory- Calendar Year 2021
1.Emission Source ID (from permit) IES-023
or Emission Source Group ID
2. Emission Source Description : Flat Storage Bagging System
3. Operating Scenario ID/ OS - 22/Grain Loadout to Trailers
Description:
4. SCC Number/Description: Not required by facility, will be completed by DAQ
5. Throughput/units in 2021:
(e.g.production or fuel use):
6. Fuel Information %Sulfur %Ash Heat Content
(If fuel is used)
(Btu/units)
7. Capture Efficiency
(%of Emissions from this Process Vented
to Control Device or Stack):
8. Control Device Information :None
Order CS-ID CD ID Control Device Description
(as listed in permit)
9.Emission Release Point(ERP)Information: (Sources vented to more than one ERP use additional entry lines):
ERP ID ERP Type Height Diameter Temperature Velocity Volume Flow ERP Description
(in feet) Circle(enter ft (F) (Feet/sec) Rate (Acfm)
Rectangle(L x W)
(in 0.1 feet)
44

Operating Scenario: OS - 22 Emission Source/Group ID: IES-023
10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2021)
Hours per Day ( 24 ) Days per Week ( 7 ) Weeks per Year ( 52 )
11.Typical Start&End Times For Operating Scenario: Start: 0 End: 2359
12. Seasonal Periods Percent Annual Throughput:
Jan-Feb + Dec 25% March-May 25% June-Aug. 25% Sept.-Nov. 25%
2021 2021 2021 2021
13. Actual Emissions per Pollutant Listed
Attach calculations and documentation of emission factors or other estimation methods used.
Emissions- Emission Control
GHG CAS GHG Estimation Efficiency Emission Ef
Pollutants Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
Criteria Emissions- Emission Control
Pollutant Emission Ef
(NAAQS) Criteria Estimation Efficiency
Pollutants Code Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
CO CO 08
NOx NOx 08
TSP TSP 08
PM10 PM10 08
PM2.5 PM2.5 08
S02 S02 08
VOC VOC 08
Emission
HAP/TAP CAS Emissions Estimation Control Emission EF
Pollutants (In Alphabetical Order) (See instructions) HAP/TAPS Method Code Efficiency Factor Control
(Pounds/Year) (Net after all controls)
(See Instructions)
2021
45

COPY of RECORD Date Submitted: 11/29/2022 12:32:16
As entered in AERO
Facility Name: Smithfield Hog Production - Bladenboro Feed Mill Facility ID : 0900066
255 Bryant Swamp Road Permit : 08155
Bladenboro,NC 28320 County : Bladen
DAQ Region : FRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory- Calendar Year 2021
1.Emission Source ID (from permit) U-ES-009b
or Emission Source Group ID
2. Emission Source Description : Ground grain negative air system CD 218b
3. Operating Scenario ID/ OS - 26/Ground grain transfer handling system
Description:
4. SCC Number/Description: Not required by facility, will be completed by DAQ
5. Throughput/units in 2021: 172870 TON/yr
(e.g.production or fuel use):
6. Fuel Information %Sulfur %Ash Heat Content
(If fuel is used)
(Btu/units)
7. Capture Efficiency
(%of Emissions from this Process Vented 100
to Control Device or Stack):
8. Control Device Information
Order CS-ID CD ID Control Device Description
(as listed in permit)
1 CS-6 U-CD-218b Ground Grain baghouse -218b
9. Emission Release Point(ERP)Information: (Sources vented to more than one ERP use additional entry lines):
ERP ID ERP Type Height Diameter Temperature Velocity Volume Flow ERP Description
(in feet) Circle(enter ft (F) (Feet/sec) Rate (Acfm)
Rectangle(L x W)
(in 0.1 feet)
VERTICAL Groundgrain
EP-009b STACK 174 1.04 72 58.8 2996.98 turnhead baghouse
filter- 218b
46

Operating Scenario: OS - 26 Emission Source/Group ID: U-ES-009b
10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2021)
Hours per Day ( 14 ) Days per Week ( 6 ) Weeks per Year ( 52 )
11.Typical Start&End Times For Operating Scenario: Start: 0 End: 2359
12. Seasonal Periods Percent Annual Throughput:
Jan-Feb + Dec 25% March-May 25% June-Aug. 25% Sept.-Nov. 25%
2021 2021 2021 2021
13. Actual Emissions per Pollutant Listed
Attach calculations and documentation of emission factors or other estimation methods used.
Emissions- Emission Control
GHG CAS GHG Estimation Efficiency Emission Ef
Pollutants Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
Criteria Emissions- Emission Control
Pollutant Emission Ef
(NAAQS) Criteria Estimation Efficiency
Pollutants Code Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
CO CO 08 0
NOx NOx 08 0
TSP TSP 1 0.05 08 99 0.061 BEFORE
PM10 PM10 0.03 08 99 0.034 BEFORE
PM2.5 PM2.5 0.01 08 99 0.0058 BEFORE
S02 S02 08 0
VOC VOC 08 0
Emission
HAP/TAP CAS Emissions Estimation Control Emission EF
Pollutants (In Alphabetical Order) (See instructions) HAP/TAPS Method Code Efficiency Factor Control
(Pounds/Year) (Net after all controls)
(See Instructions)
2021
47

COPY of RECORD Date Submitted: 11/29/2022 12:32:16
As entered in AERO
Facility Name: Smithfield Hog Production - Bladenboro Feed Mill Facility ID : 0900066
255 Bryant Swamp Road Permit : 08155
Bladenboro,NC 28320 County : Bladen
DAQ Region : FRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory- Calendar Year 2021
1.Emission Source ID (from permit) U-ES-009b
or Emission Source Group ID
2. Emission Source Description : Ground grain negative air system CD 218b
3. Operating Scenario ID/ OS - 24/Ground grain transfer handling system
Description:
4. SCC Number/Description: Not required by facility, will be completed by DAQ
5. Throughput/units in 2021:
(e.g.production or fuel use):
6. Fuel Information %Sulfur %Ash Heat Content
(If fuel is used)
(Btu/units)
7. Capture Efficiency
(%of Emissions from this Process Vented
to Control Device or Stack):
8. Control Device Information :None
Order CS-ID CD ID Control Device Description
(as listed in permit)
9.Emission Release Point(ERP)Information: (Sources vented to more than one ERP use additional entry lines):
ERP ID ERP Type Height Diameter Temperature Velocity Volume Flow ERP Description
(in feet) Circle(enter ft (F) (Feet/sec) Rate (Acfm)
Rectangle(L x W)
(in 0.1 feet)
48

Operating Scenario: OS - 24 Emission Source/Group ID: U-ES-009b
10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2021)
Hours per Day ( 24 ) Days per Week ( 7 ) Weeks per Year ( 52 )
11.Typical Start&End Times For Operating Scenario: Start: 0 End: 2359
12. Seasonal Periods Percent Annual Throughput:
Jan-Feb + Dec 25% March-May 25% June-Aug. 25% Sept.-Nov. 25%
2021 2021 2021 2021
13. Actual Emissions per Pollutant Listed
Attach calculations and documentation of emission factors or other estimation methods used.
Emissions- Emission Control
GHG CAS GHG Estimation Efficiency Emission Ef
Pollutants Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
Criteria Emissions- Emission Control
Pollutant Emission Ef
(NAAQS) Criteria Estimation Efficiency
Pollutants Code Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
CO CO 08
NOx NOx 08
TSP TSP 08
PM10 PM10 08
PM2.5 PM2.5 08
S02 S02 08
VOC VOC 08
Emission
HAP/TAP CAS Emissions Estimation Control Emission EF
Pollutants (In Alphabetical Order) (See instructions) HAP/TAPS Method Code Efficiency Factor Control
(Pounds/Year) (Net after all controls)
(See Instructions)
2021
49

COPY of RECORD Date Submitted: 11/29/2022 12:32:16
As entered in AERO
Facility Name: Smithfield Hog Production - Bladenboro Feed Mill Facility ID : 0900066
255 Bryant Swamp Road Permit : 08155
Bladenboro,NC 28320 County : Bladen
DAQ Region : FRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory- Calendar Year 2021
1.Emission Source ID (from permit) U-ES-009b
or Emission Source Group ID
2. Emission Source Description : Ground grain negative air system CD 218b
3. Operating Scenario ID/ OS - 25/Ground grain transfer handling system
Description:
4. SCC Number/Description: Not required by facility, will be completed by DAQ
5. Throughput/units in 2021:
(e.g.production or fuel use):
6. Fuel Information %Sulfur %Ash Heat Content
(If fuel is used)
(Btu/units)
7. Capture Efficiency
(%of Emissions from this Process Vented
to Control Device or Stack):
8. Control Device Information :None
Order CS-ID CD ID Control Device Description
(as listed in permit)
9.Emission Release Point(ERP)Information: (Sources vented to more than one ERP use additional entry lines):
ERP ID ERP Type Height Diameter Temperature Velocity Volume Flow ERP Description
(in feet) Circle(enter ft (F) (Feet/sec) Rate (Acfm)
Rectangle(L x W)
(in 0.1 feet)
50

Operating Scenario: OS - 25 Emission Source/Group ID: U-ES-009b
10. Operating Schedule:(Source/OperatingScenario that best characterizes Calendar Year 2021)
Hours per Day ( 24 ) Days per Week ( 7 ) Weeks per Year ( 52 )
11.Typical Start&End Times For Operating Scenario: Start: 0 End: 2359
12. Seasonal Periods Percent Annual Throughput:
Jan-Feb + Dec 25% March-May 25% June-Aug. 25% Sept.-Nov. 25%
2021 2021 2021 2021
13. Actual Emissions per Pollutant Listed
Attach calculations and documentation of emission factors or other estimation methods used.
Emissions- Emission Control
GHG CAS GHG Estimation Efficiency Emission Ef
Pollutants Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
Criteria Emissions- Emission Control
Pollutant Emission Ef
(NAAQS) Criteria Estimation Efficiency
Pollutants Code Pollutants Method Code (Net after Factor Control
(Tons/Year) (See Instructions) all controls)
2021
CO CO 08
NOx NOx 08
TSP TSP 08
PM10 PM10 08
PM2.5 PM2.5 08
S02 S02 08
VOC VOC 08
Emission
HAP/TAP CAS Emissions Estimation Control Emission EF
Pollutants (In Alphabetical Order) (See instructions) HAP/TAPS Method Code Efficiency Factor Control
(Pounds/Year) (Net after all controls)
(See Instructions)
2021
51

Facility Total CY 2021 Emissions Summary
COPY of RECORD Date Submitted: 11/29/2022 12:32:16
As entered in AERO
Facility Name: Smithfield Hog Production - Bladenboro Feed Mill Facility ID : 0900066
255 Bryant Swamp Road Permit : 08155
Bladenboro,NC 28320 County : Bladen
DAQ Region : FRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory- Calendar Year 2021
Record Facility-Wide Totals From all Permitted and Non-Permitted AirPollutant Emission Sources
Green House Gases Pollutants(GHG
Actual Emissions(Tons/Year)
Pollutant 11 CAS 12021 2013 % Change
Criteria Pollutants
Actual Emissions(Tons/Year)
Pollutant CAS 2021 2013 %Change
CO CO 3.81 4.1 -7.07317%
NOx NOx 5.16 4.88 5.7376995%
PM(TSP) TSP 74.95 62.17 20.556538%
PM 10 PM 10 30.41 29.73 2.287253%
PM2.5 PM2.5 0.71 .72 -1.3888958%
S02 j S02 j 0.03 .03 j 0.0%
VOC I VOC 10.26 1.27 -3.703711%
Hazardous Air Pollutants(HAPS)and/or Toxic Air Pollutants(TAPs)
Actual Emissions(Pounds/Year)
Pollutant I CAS 12021 12013 1%Change
Pollutant Group:Polycyclic Organic Matter(Specific Compounds from OAQPS for TV)Group Sum:.0538
Naphthalene(Component of 91-20-3 0.0538 .0593 -9.274874%
POMTV)
Benzene 71-43-2 0.20343 .204 -0.27941138%
Formaldehyde 50-00-0 7.27753 7.29 -0.17105307%
Hexane,n- 110-54-3 1174.74496 175 -0.14573452%
Toluene 108-88-3 10.32979 1.33 -0.0636415%
52

COPY of RECORD Date Submitted: 11/29/2022 12:32:16
As entered in AERO
Facility Name: Smithfield Hog Production - Bladenboro Feed Mill Facility ID : 0900066
255 Bryant Swamp Road Permit : 08155
Bladenboro,NC 28320 County : Bladen
DAQ Region : FRO
Comments From Facility:
11 A 6/2022 - (Control Device Comments
CD CD-129 : Description of baghouse cloth area should be increased from 200 to 210 ft2CD CD-123 : Description of
baghouse cloth area should be increased from 332 to 544 ft2
11/29/2022 - General (Comments.
General Comments : Emissions from ES-009 are incorporated into group GR3 (Internal Handling or CS-1). CD-218b
was added to ES-009, but Aero would not let me add CD-218b to GR3 or CS-1, so it has been placed independently
within the inventory whereas it should be grouped with GR3 and associated with ES-009.
53