HomeMy WebLinkAboutAQ_F_1900039_20210706_EI_Cmb-EI-File 2020 Emissions Inventory Review / Data Tracking Form
Facility Name: Southern Veneer Specialty Products, LLC - Moncure Facility ID: 1900039
Facility Assigned to: Data Entry: Chatham County
Classification: Matthew Mahler Confidential Copy Submitted?
Title V AY-1, ❑1 S
�o
Initial Review/Data Entry
Enter date received into ED. Date Received:
❑ Assigned to appropriate individual. Date Assigned: 4��0�6�2, Date Due:
Paper copy submitted: One copy received with supporting documentation,certification form signed by responsible
official,and appears generally complete;OR
❑ Electronic copy submitted: All supporting documentation and certification form(with time/date stamp)signed by
responsible official has been received.
Comments:_ r (eo e— Cy Tow
Inventory Review
IR/All forms and supporting documentation appear to be complete if paper submission(check ED OS data if electronic).
Contact,address,phone number changes entered into I-Beam/Facilities if necessary.
irAll known operating scenarios,control devices,and emission release points have been entered for each emission
source(permitted, insignificant,and unpermitted)or note that the emission source was not operated or not required to report.
[9 Check if SCC codes for each OS are accurate and update if needed.
Evaluate"U" sources for significance and address according to policy.
Calculations/forms appear to add up correctly.
All compliance issues are being addressed(e.g.Toxics limits,above TV thresholds, large emissions
1�(increase/decrease, installation without a permit).
AII volatile HAPs/TAPs were included in the VOC total.
Calculations and control efficiencies appear correct. Emission factors are the best available and most current factors
ppropriate for the reporting facility(e.g. stack testing,AP-42,etc.).
Review facility comments and address any issues.
Update ED(Data Entry Main)if additional information is required(corrections due date and date received).
Check all ED QA/QC reports.
�omparison with previous emission inventory must be made and outliers(> 10%)must be investigated and explained.
ut inventory review comments and summarize any changes in ED-Data Entry Main"DAQ internal comments".
Date Info Requested: Date Info Received: Total Days on Hold:
r
Date Review Complete: 0�1, ?.r Signature:
Date Submitted to EI Coordinator:
f
Date Approved: Initials:
Facility Total CY 2020 Emission Summary Recorded in ED Facility ID#: 1900039
Facility Name: Southern Veneer Specialty Products, LLC - Moncure Permit#(s): 03424T29
Green House Gases Pollutants (GHG) Actual Emissions %
Tons/Yr
Pollutant CAS
Demini- Change
mus
Not Not N/A
Reported Reported
CO2 equivalent (sum of individual GHG pollutant emissiot No GHGs
times their 1995 IPCC Global Warming Potential (GWP), Reported
converted to metric tons)
Criteria Pollutants Actual Emissions
(Tons/Year)
Pollutant CAS CY 2020 CY 2019 Demini- %
from ED from Fees mus Change
CO CO 22.88 19.21 0.5 19.1%
NOx NOx 42.61 48.98 0.5 -13.0%
PM(TSP) TSP 50.62 54.88 0.5 -7.8%
PM10 PM10 50.39 54.63 0.5 -7.8%
PM2.5 PM2.5 46.05 49.86 0.5 -7.6%
S02 SO2 0.660000 0.790000 0.5 -16.5%
VOC VOC 81.31 60.86 0.5 33.6%
Hazardous Air Pollutants (HAPs) Actual Emissions
and/or Toxic Air Pollutants (TAPS) (Pounds/Year)
Pollutant CAS CY 2020 CY 2019 Demini- %
from ED from Fees mus Change
Arsenic & Compounds (total mass of elemental AS, arsine and 1.35 1.54 0.01 -12.3%
all inorganic compounds)
Arsenic Unlisted Compounds - Specify Compound ASC-Other 1.35 1.54 0.01 -12.3%
(Component of ASC)
Cadmium & compounds (total mass includes elemental metal) 1.99 2.27 0.1 -12.3%
Cadmium Metal, elemental, unreacted(Component( 7440-43-9 1.99 2.27 0.1 -12.3%
CDC)
Chromium -AIVTotal(includes Chromium (VI) categories, 12.98 14.80 0.1 12.3%
metal and others)
Chromic acid(VI) (Component of SolCR6 & CRC) 7738-94-5 2.92 3.33 0.01 -12.3%
Chromium Unlisted Compounds - Specify Compour CRC-Other 10.06 11.47 0.1 -12.3%
(Component of CRC)
10/25/2021 Page I of 4
Facility Total CY 2020 Emission Summary Recorded in ED Facility ID #: 1900039
Facility Name: Southern Veneer Specialty Products, LLC - Moncure Permit#(s): 03424T29
Hazardous Air Pollutants (HAPs) Actual Emissions
and/or Toxic Air Pollutants (TAPs) (Pounds/Year)
Pollutant CAS CY 2020 CY 2019 Demini- %
from ED from Fees mus Change
Chromium (VI)Soluble Chromate Compounds (Component of Z92 3.33 0.01 -12.3%
CRC)
Chromic acid (VI) (Component of So1CR6 & CRC) 7738-94-5 2.92 3.33 0.01 -12.3%
Cobalt& compounds 0.888340 1.01 1.0 -12.0%
Cobalt Unlisted Compounds - Specify Compound COC-Other 0.888340 1.01 1.0
(Component of COC)
Lead& compounds 6.45 7.36 1.0 1 -12.4%
Lead Unlisted Compounds - Specify Compound PBC-Other 6.45 7.36 10.0 -12.3%
(Component of PBC)
Manganese& compounds 1,043.37 1,189.84 10.0 -12.3%
Manganese Unlisted Compounds - Specify Compoui MNC-Other 1,043.37 1,189.84 10.0 -12.3%
(Component of MNC)
Mercury& Compounds-all total mass includes Mg Vapor 0.481950 0.549580 0.001 1 -12.3%
Mercury, vapor(Component of HGC) 7439-97-6 0.481950 0.549580 0.001 -12.3%
Nickel& Compounds, sum total mass includes elemental 4.90 5.59 1.0 -12.3%
Nickel metal (Component of NIC) 7440-02-0 4.90 5.59 1.0 -12.3%
Polycyclic Organic Matter (7 PAH Compounds for NIF) 0.000000 Not 1.0 N/A
Reported
Benzo(a)pyrene (Component of 83329/POMTV& 50-32-8 0.000000 Not 1.0 N/A
56553/7PAH) Reported
Polycyclic Organic Matter(Specific Compounds from OAQPS 3.41 3.90 1.0 -12.6%
or TV)
Benzo(a)pyrene (Component of 83329/POMTV& 50-32-8 0.000000 Not 1.0 N/A
56553/7PAH) Reported
Naphthalene (Component of 83329/POMTV) 91-20-3 3.41 3.90 1.0 1 -12.6%
Acetaldehyde 75-07-0 2,365.84 1,834.32 10.0 729.0%
Acrolein 107-02-8 487.73 350.16 10.0 39.3%
Benzene 71-43-2 250.59 177.03 1.0 41.6%
Carbon tetrachloride 56-23-5 1.07 1.22 1.0 1 -12.3%
10/25/2021 Page 2 of 4
Facility Total CY 2020 Emission Summary Recorded in ED Facility ID #: 1900039
Facility Name: Southern Veneer Specialty Products, LLC - Moncure Permit#(s): 03424T29
Hazardous Air Pollutants (HAPs) Actual Emissions
and/or Toxic Air Pollutants (TAPs) (Pounds/Year)
Pollutant CAS CY 2020 CY 2019 Demini- %
from ED from Fees mus Change
Chlorine 7782-50-5 331.03 377.50 100.0 1 -12.3%
Cumene 98-82-8 1,260.36 1,026.64 100.0 22.8%
Ethyl chloride (chloroethane) 75-00-3 33.89 27.60 10.0 22.8%
Ethylene dichloride (1,2-dichloroethane) 107-06-2 51.92 42.30 1.0 22.8%
Formaldehyde 50-00-0 2,127.38 1,748.89 10.0 21.6%
Hydrogen chloride (hydrochloric acid) 7647-01-0 144.98 165.34 100.0 1 -12.3%
MEK (methyl ethyl ketone, 2-butanone) 78-93-3 50.02 59.42 100.0 1 -15.8%
Methanol (methyl alcohol) 67-56-1 9,721.04 9,429.92 1,000.0 3.1%
Methyl bromide (bromomethane) 74-83-9 49.74 40.53 1.0 22.7%
Methyl chloride (chloromethane) 74-87-3 11.15 12.71 1.0 -12.3%
Methylene chloride 75-09-2 44.60 36.33 1.0 22.8%
MIBK (methyl isobutyl ketone) 108-10-1 214.15 198.59 10.0 7.8%
Phenol 108-95-2 478.12 606.03 100.0 1 -21.1%
Phosphorus Metal, Yellow or White 7723-14-0 2,283.69 2,604.28 1.0 -12.3%
Polycyclic Organic Matter(Inc PAH, dioxins, etc. N POM 9.35 10.69 1.0 -12.5%
& AP 42 historic)
Propionaldehyde 123-38-6 15.80 28.82 10.0 1 -45.2%
Toluene 108-88-3 0.001780 Not 100.0 N/A
Reported
Trichlorobenzene, 1,2,4- 120-82-1 95.10 77.49 100.0 22.7%
Vinyl chloride 75-01-4 32.75 26.68 0.1 22.8%
Vinylidene chloride 75-35-4 47.96 39.44 0.1 21.6%
Xylene (mixed isomers) 1330-20-7 191.65 145.73 100.0 31.5%
10/25/2021 Page 3 of 4
Largest Individual HAP Methanol (methyl alcohol) 9,721.04 lbs
Total HAP Emissions 21,325.741bs
Largest Individual CAP VOC 81.31 tons
Total CAP Emissions 197.85 tons
Total TAP Emissions 7,923.22 lbs
Total Aggregate 198.11 tons
Emissions
DAO's Comments Reizardine Inventory
I have added SCC code for OS38. I have also updated xylene emissions in OS26 and OS30 to match
with the emission calculations submitted by the facility.
CO,VOC,acetaldehyde,acrolein,Benzene,Cumene,ethyl chloride,ethylene dichloride,
formaldehyde,methyl bromide,methylene chloride,vinyl chloride,vinylidene chloride,and xylene
emission increases are due to a 46%increase in throughput for OS26,veneer dryers and wood
burner(softwood).
S02,NOx,Arsenic compounds,Cadmium compounds,Carbon tetrachloride, Chlorine, Chromic
acid,Chromium compounds,Cobalt compounds,Hydrogen chloride,Manganese compounds,
Mercury compounds,Methyl chloride,Naphthalene,Nickel metal,Phosphorus metal and Polycyclic
Organic Matter emission decreases dur to a 71%decrease in throughput for OS31,Veneer dryers
and heat source(wood burner)HAPS lb/mmBtu,(Hardwood).
Emission decrease of phenol is due to decrease in throughput for OS 10.Emission decrease of
propionaldehyde is due to a decrease in throughput of OS30.
Several pollutants had emission changes greater than 10%but the lbs/yr was less than the de
minimus.
10/25/2021 Page 4 of 4
COPY of RECORD Date Submitted: 6/30/2021 17:19:37
Inventory Certification Form(Title V)
Facility Name: Southern Veneer Specialty Products,LLC- Moncure Facility ID: 1900039
306 Corinth Road Permit : 03424
Moncure,NC 27559 County :Chatham
DAQ Region : RRO
North Carolina Department of Environmental Quality
Division of Air Quality
Air Pollutant Point Source Emissions Inventory-Calendar Year 2020
These forms must be completed and returned even if the facility did not operate or emissions were zero
The legally defined"Responsible Official" of record or your facility is Thomas Reams
This person or one that meets the definition below must sin this certification form.
The official submitting the information must certify that he/she complies with the requirements as specified in Title 15A NCAC
2Q.0520(b)which references and follows the federal definition.40 CFR Part 70.2 defines a responsible as meaning one of the
following:
1. For a corporation:a president,secretary,treasurer,or vice-president of the corporation in charge of a principal business
function,or any other person who performs similar policy or decision making functions for the overall operation of one or
more manufacturing,production,or operating facilities applying for a or subject to a permit and either
i. the facilities employ more than 250 persons or have gross annual sales or expenditures exceeding$25 million(in
second quarter 1980 dollars);or
ii. the delegation of authority to such representatives is approved in advance by the permitting authority;
2. For partnership or sole proprietorship;a general partner or the proprietor,respectively;
3. For a municipality,state,federal,or other public agency includes the chief executive officer having responsibility for the
overall operations of a principal geographic unit of the agency(e.g.,a Regional Administrator of EPA).
CERTIFICATION STATEMENT:
(Important:Legally,Responsible Official.read and sign after all submissions are final.)
I certify that I am the responsible official for this faci ,as described above,and hereby certify that the information contained in
this air emissions report, including attached calc ations and documentation. is true,accurate and complete. (Subject to legal
penalties of up to$25,000 per occurrence and ssib imprisonment as outlined in G.S.§ 143-215.3(ax2))
Responsible Official's Signs a elo,wAsoue ink): Date Signed: -30 -
Printed Name: Tho s
Signature: �7
This form applies to Title V facilities.If this facility is not classified asTitle V,please telephone}our regional office ):mission
Inventory Contact at once for proper forms.
Email address of Responsible Official: thomas.reams@syspecialty.com
Information on this Form cannot he held confidential NC Dept of Environmental Quality
JUL - f 2021
COPY of RECORD Date Submitted: 6/30/2021 17:19:37
Raleigh Regional Office
1
� � i ° � ! I i � �0�
i i i iii
i ii i iii
�o �
� �� ���
a' � ��I II � ���
���'s � I i ���
Southern Veneer Specialty Products,LLC
Annual Activity and Usage Information
2020 Air Emissions Inventory
Activity and Usage 2020 Annual Amount
Vat Production 95,283,000 ftZ(3/8")
Hardwood Veneer Production 8,591,380 ftZ(3/8")
Plywood Softwood Veneer Production 70,876,860 ft(3/8")
Production Hardwood Plywood Production 5,733,210 ftZ(3/8")
Softwood Plywood Production 48,437,220 ftZ(3/8")
Plywood Press Hours of Operation 4,160 hours
Sander Production 0 ft (3/8")
Pine Los 87,542 tons
Log Throughput Gum Logs 863 tons
Poplar Logs 16,432 tons
Boiler Hours of Operation 7,560 hours
Plant wide Fuel Combustion 14,326 ton(as fired)
Dry Wood Heat Content 7,776 Btu/Ib
Total Dry Wood Combusted 222,798 MMBtu/yr
Green Chips Purchased for Combustion 0 tons chips
Green Chips Combusted 11,427 tons chips
Green Chips Heat Content 4,541 Btu/Ib
Total Green Chips Combusted 113,502 MMBtu
Total Hog Fuel Combusted' 9,335 ton as fired
Poplar Bark Heat Content2 5,703 Btu/lb
Plant wide Fuel Gum Bark Heat Content2 4,952 Btu/lb
Combustion Pine Bark Heat Content2 4,018 Btu/lb
Total Hog Fuel Combusted 82,726 MMBtu
Total Green Fuel Combusted 196,228 MMBtu
Total of All Fuel Combusted 419,026 MMBtu
Boiler Efficiency 86.0%
Natural Gas Combusted 2,858.00 therms
250 HP Diesel Fired Water Pump#1 260 gallyr
26 hr
250 HP Diesel Fired Water Pump#2 130 al/
yr
13 hr
17 kW Propane Fired Generator N/A
12 hr/yr
G:l4ao =Vt PRomtclx\Momae.N0AkkRgxrea0020\iW=I—toryWwme 2020 AM C J1 21-063091,od Info
Southern Veneer Specialty Products,LLC
Annual Activity and Usage Information
2020 Air Emissions Inventory
Activity and Usage 2020 Annual Amount
Veneer Diverter 70,878 ton/yr
Hammer Hog Truck Dump 1,200 ton/yr
Dry Waste Truck Dump 980 ton/yr
Core Chipping and Handling 1,642 ton/yr
Green Veneer Hogging Operations 18,694 to
Maintenance Parts Washer Sorn Purchased 0
Miscellaneous End Seal Paint 0gal/yr
Paint Usage(Logo painting) 18gal/yr
Ink Usage 150
Green Veneer Stackers 70,878 ton/yr
Plywood Surface Patching(W.B.Face) N/A
Plywood Surface Patching(Part A) N/A gal/yr
Plywood Surface Patching(Part B) N/A gal/yr
Cores Sold in 2020 N/A cores
PF Resin Usage PF Resin Application Rate 0.017 Tons/MMSF
PF Resin Usage 1,968 tons
1. Bark fined is calculated based on log usage and percentage of a log that is bark(assumes 80%of
bark originally on log is combusted). Dry fuel is estimated to be 15%of total fuel usage based on data
from Chester Plywood(sister plant).
2. Heat Content is Chester Plywood fuel analysis data.
G:%mthm Vm Prodwu\Mmm¢ NCV i 4Up rring\20201F,-.1—to ylM—2020 AE1 C.I.21-0630\P d Info
Southern Veneer Specialty Products,LLC
Emission Source(s): Fluidized Bed Wood Boller and Two Direct Heated Dryers
Source H)Number(s):ES-01,ES-09,ES-10,CD-02(multiclone on boiler)
Emission Point(s): EP-09a-d,EP-10&-d
2020 Actual Process Throughput: 7,560 Boiler operating houta/yr
14,326 dry wood(ton/yr)
20,762 green wood(ton/yr)
419,026 MMBtWyr Total Fuel Combusted
1%,228 MMBW/yr Caem Wood Combusted
222,798 MMBtu/yr Dry Wood Combusted
8,591,380 afly, Hardwood Veneer Production
70,876,860 sf/yr Softwood Veneer Production
79,468,240 sf/yr Total Veneer Production
45,301 MMBW/yr Btu of Woad Combusted-ratioed for Hardwood Vancer
373,725 MMBW/yr Btu of Wood Combusted-ratioed for Softwood Veneer
Actual Emissions Summary:
Hardwood Softwood Iota]
Compound Emission Factor Units Ref. Emission Factor Units Rd. Emissions*
n Emissions
tool tonlyr tonl r
.0 3.76E-04 Ib/sf 1 1,61r 6.00E-04 Ib/sf 1 21.26 22.9
NO 2.03E-01 IbM4dBW 6 4.60 2.03F.-01 Ib/MMBW 6 37.93 42.5
PM 8.308 Ib/hr 3 3.40 8.308 Ib/hr 3 29.01 31.4
'M10 8.308 IbIlr 3 3.40 9.308 IbAw 3 28.01 31.4
',M2.5 8.14 Ib/hr 3 3.33 8.14 Ib/hr 3 27.45 30.8
OC loss acetic acid-hardwood and pinme-softwood 2.41E-04 Ib/af 1 1.04 107E-03 IWIf 1 37.92 39.0
WPPI VOC 1.34E-04 IN 4 0.59 1.77E-03 I-.f 4 62.73 63.3
S02 3.18E-03 Ib/h4 Mtu 6 0.07 3.18E-03 Ib/MMBW 6 0.59 0.67
Compound Emission Factor Ualk R.C. EmtsdonP Emission Factor Units Rd. Emtssic i Emissions
Acetaldehyde 5.23E-06 Ib/sf 2 44.93 2.40E-05 lNaf 2 1701.04 1745.98
Aeeto henone 1.84E-06 Ib/MuBtu 6 0.08 1.84E-06 IbMIMBtu 6 0.69 0.77
Acrolem 1.27E-04 INFut-u 6 5.75 6.80E-06 IbAf 2 481.96 487.72
Antimony&compounds 3.46E-06 Ib/MNMtu 6 0.16 3.46E-06 IbIMMBW 6 1.29 1.45
Arsenic&compounds 3.22E-06 IbM mIltu 6 0.15 3.22E-06 IbfMMBW 6 1.20 1.35
Benzene 2.90E-07 IbAl' 2,5 2.49 3.50E-06 lb/sf 2 249.07 250.5
B a 1.52E-08 IbM1MBW 6 0.00 1.52E-08 IbMUdBm 6 0.01 0.01
Beryllium&compounds TH 4.00E-08 lWMMBtu 6 0.00 4.00E-08 IbfmmBW 6 0.01 0.02
Cadmium&compounds 4.76E-06 l M1MBW 6 W 0.22 4.76E.06 lb/MMB 6 1.78 1.9
Carbon tetrachloride 2.55E-06 lbfm mBW 6 0.12 2.55E-06 IbMiMBW 6 0.95 1.07
Chlorine 7.90E-04 IbM1MBW 5 35.79 7.90E-04 Ib/h9dBW 5 29524 331.03
Chlorobeezene 1.66E-05 Ih/MMBtu 6 0.75 1.66E-05 IbMfMBW 6 6.20 6.9
Southern Veneer Specialty Products,LLC
Emission Source(s): Fluidized Bed Wood Boller and Two Direct Heated Dryers
Source H)Number(s):ES-01,ES-09,ES-10,CD-02(multiclone on holler)
Emission Point(s): EP-09a-d,EP-10&-d
2020 Actual Process Throughput: 7,560 Boiler operating hours/yr
14,326 dry wood(ton/yr)
20,762 green woad(ton/yr)
419,026 MMB" Total Fuel Combusted
1%,228 MMBa✓yr Green Wood Combusted
222,798 MMBtu/yr Dry Wood Combusted
8,591,380 sf/yr Hardwood Veneer Production
70,876,860 sf/yr Softwood Veneer Production
79,469,240 ef/yr Total Veneer Production
45,301 MMBtu/yr Btu of Wood Combusted-ratioed for Hardwood Veneer
373,725 MMBtu/yr Btu of Wood Combusted-rarioed for Softwood Veneer
Actual Emissions Summan-
ilard,-d Sure.and I ntal
paun Embalms- Emissions- Ernmu
Cum d EmWioa Factor Unlb Ret. Ib/ Embdon Factor Uoiu Rot Ib/vr,
'hlorofmm 2.55E-06 IbtMNBtu 6 0.12 2.55E-06 Ib/I D4Btu 6 0.95 1.0
'hromium compounds H 2.40E-05 Ib/MMBnt 6 1.09 2.40E-05 IWMMBtu 6 8.97 10.06
'hromium VI 6.97E-06 Ib/MMBtu 6 0.32 6.97E-06 Ib/MMBtu 6 2.60 2.92
'obalt compounds 2.12E-06 Ib/h NMW 6 0.10 2.12E-06 IWMMBtu 6 0.79 0.89
umene 8.93E-06 IWsf 2,5 76.69 1.67E-05 IWsf 2,5 1193.64 1260.32
-nitro heoal 2,4- 1.31E-07 Ib/MNOtu 6 0.01 1.31E-07 IWMMBN 6 0.05 0.055
(2-eth a hthahue EMP 4.65E-08 IWMMBtu 6 0.00 4.65E-08 lh(MMBtu 6 0.02 0.01
Ethyl benzene H 3.13E-05 Ib/M Ben 6 1.42 3.13E-05 IWMMBtu 6 11.70 13.12
Ethyl chloride chloroethane 2.40E-07 Ib/sf 2,5 IN 4.49E-07 Odsf 2,5 31.81 33.87
Ethylene dichloride 1,2-dwWoroethane 3.68E-07 IWsf 2,5 3.16 6.88E-07 Ib/af 2,5 49.76 51.92
Formaldehyde 9.83E-06 IWef 1 94.45 2.50E-05 Ib✓sf 1 1771.92 1856.37
Hcxacblorodib 'osia 12,3,6,7,8 1.76E-11 IWODT 6 4.36E-07 1.76E-1I IWODT 6 4.36E-07 9.72E-07
lydrogen chloride(hydrochloric arid) 3.46E-04 Ib/M Btu 6 15.67 3.46E-04 1WMMBIu 6 129.31 144.9
Lead&compounds 1.54E-05 Ib/MMBtu 6 0.70 1.54E-05 IWMMBtu 6 5.76 6.45
an aoae&com unds 2.49E-03 bt/MMBtu 6 112.80 2.49E-03 IWMMBtu 6 930.57 1043.3
Mercury,vapor(Include in M &C 1.15E-06 Ib/MMBlu 6 0.05 1.15E-06 IWMMBIu 6 0.43 0.4
cthanol(H) 9.49E-06 IWef 2 81.53 4.13E-05 lb/iif 2 2927.21 3008.75
Methyl bromide H) romomethane) 3.53E-07 IWsf 2,5 3.03 6.59E-07 0✓sf 2,5 46.69 49.72
Methyl chloride chloromedune 2.66E-05 IWMMBtu 6 1.21 2.66E-115 IWM Ben 6 9.94 11.15
Methyl chloroform H 1 I 1 trichioroethane 3.93E-05 IWMMBM 6 1.78 3.93E-05 IWMMBtu 6 14.69 16.4
Methyl ethyl ketone 1.01E-06 Ib/sf 2,5 9.66 5.39E-06 Ib/MMBm 6 2.01 10.6
Methyl iwbutyl ketone 9.63E-07 IWsf 2,5 9.27 4.45E-04 IWMMBtu 6 166.31 174.5
Mcthylenc,chloride(77t)(dichloromedunc) 3.16E-07 IWsf 2,5 2.71 5.91E-07 lh✓sf 2,5 41.87 44.5
Naphthalene 8.13E-06 Ib/M Btu 6 0.37 8.13E-06 Ib/MhBtu 6 3.04 3.41
Nickel meal(Cornporent of Nickel&Ca 1.17E-05 Ib/tvihIBm 6 0.53 1.17E-05 1WMMBm 6 4.37 4.9
Nitro heaol,4-H 9.41E-08 I Ib/M Ben 6 1 0.00 9.41E-08 lb!MMBtu 6 0.04 0.03
entachloro henol 4.48E-08 I Ib/MMBtu 1 6 1 0.00 1 4.48E-08 IbWMBtu 6 1 0.02 0.019
Southern Veneer Specialty Products,LLC
Emission Source(s): Fluidized Bed Wood Boiler and Two Direct Heated Dryers
Source H)Number(s):ES-01,ES-09,ES-10,CD-02(multiclone on boiler)
Emission Point(s): EP-09a-d,EP-10a-d
2020 Actual Process Throughput: 7,560 Boiler operating hours/yr
14,326 dry wood(ton/yr)
20,762 green wood(ton/yr)
4I9,026 MMBuvyr Total Fuel Combtteted
196,228 MMBtu/yr Green Wood Combusted
222,799 MMB" Dry Wood Combusted
8,591,380 s0yr Hardwood Veneer Production
70,876,860 sf/yr Softwood Veneer Production
79,468,240 sf/yr Total Veneer Production
45,301 MMBtu/yr Btu of Wood Combusted-noticed for Hardwood Veneer
373,725 MMBtWyr Btu of Wood Combusted-ratioed for Softwood Veneer
Actual Emissions Summary:
Hard.noa snn and Tmai
Compound Emission Fader Units Ref. Emissions• Emission Factor Units Ref. Emissions* Emissions•
Ib/vr Ib/ Ib/vr
enbl ene PERC tetrachloroeth ene T 2.46E-05 Ib/MMetu 6 1.11 2.46E-05 ib/MMBN 6 9.19 10.J1
Phenol TH 1.63E-06 Ib/sf 2,5 14.03 3.41E-06 INsf 2 241.69 255.72
phosphorus;Metal,Yellow or White 5.45E-03 INMMBtu 6 246.89 5.45E-03 Ib/MMBN 6 2036.80 2283.E
Polychlorinated bi hen 7.41E-09 Ib/MMBtu 6 0.000 7.41E-09 IbIMUBN 6 0.0028 0.003
Polytyclic Organic Mane 2.23E-05 Ib/MlstBtu 6 1.01 2.23E-0S Ib/M NMtu 2 8.34 9.35
ro ionaldeh 9.08E-07 Ib/sf 2,5 7.90 2.14E-05 Ib/M N BN 6 9.00 15.7.
Propylem,dichloride (1,2 diehl aria 1.68E-05 Ih/M U BN 6 0.76 1.68E-05 IWMN BN 6 6.28 7.04
Selenium compounds 5.39E-07 Ib/MMBtu 6 0.02 5.39E-07 INMMBN 6 0.20 0.23
Styrene 3.87E-07 NO 2,5 3.32 1.54E-05 INMMBN 6 5.76 9.08
etrachlorodr io 2 3 7 8-Cllp 1.10E-1l 1NODT 6 2.72E-07 1.10E-11 WODT 6 2.72E-07 5.45E-07
Toluene 3.42E-07 lb/of 2,5 2.94 3.67E-06 Ih/MMBN 6 1.37 4.31
richlorobenr<ne,1,2,4- 6.75E-07 INaf 2,5 5.80 1.26E-06 INsf 2,5 89.39 95.1
richloroeth ene 1.99E-05 INMMBN 6 0.90 1.99E-05 Ib/MMBN 6 7.44 8.3
richlomfluoromedume CPC I11 1.59E-05 Ib/MMBN 6 0.72 1.59E-05 INMMBN 6 5.94 h 66
Tnehlorophrnol,24,6- 2.76E-07 IhfMMBN 6 0.01 2.76E-07 INMMBtu 6 0.10 0.11 qj
in I chloride chloroethrne 2.32E-07 INaf 2,S 2.00 4.34E-07 16/sf 2,5 30.78 32.77
Vinvlidene chloride l,ldichlomethme)(TH) 3.60E-07 1 INaf 2,3 3.10 6.33E-07 1Naf 2,5 44.61 47.9
-Xylene 3.95E-07 Ib/af 2,1 3.39 7.38E-07 lb/sf 2,S 52.321 55.71
.-Xyl.e(TH) I 3.95E-07 I INaf 1 2,5 1 3.39 1.87E-06 I Mat I2 132.54 175.97
•Nate_All emissions include emissions from wood combustion and wood drying.
References:
1-Stack Testing Data,1996
2-Hiatorica0y-used foams for dvect-Ned veneer dryers.Xyleoes arse speciated,but combined on summary tab per NCDAQ guidoom
3-Based on Feb.12,2010 stack test.PMIO assumed to be equal to PM.PM2.5 assumed to be 98%
4-OTM26:Interim VOC Measurement Protocol for the Wood Products Industry-July 2007
5-Half the average detection values are used for nondetects.
6-Historical industry-specific emission factors
Southern Veneer Specialty Products, LLC
Emission Source(s): Fluidized Bed Wood Boiler and Two Direct Heated Dryers
Source ID Number(s): ES-01,ES-09, ES-10, CD-02 (multiclone on boiler)
Emission Point(s): EP-09a-d, EP-10a-d
-Natural Gas burner for boiler start up
2020 Actual Process Throughput:
Natural Gas 2,858 therms/yr
0.280 MMcf/yr
Multiclone
Natural Gas Control Emissions
Compound Emission Factor(1) Eff.(2) (lb/ r) (TPY)
CO 84lb/MMcf -- 1.18E-02
Ox 100lb/MMcf -- 1.40E-02
PM 7.61b/MMcf 90% -- 1.06E-04
PM-10 7.6lb/MMcf 90% -- 1.06E-04
PM-2.5 7.6lb/MMcf 90% -- 1.06E-04
SO2 0.6lb/MMcf -- 8.41E-05
VOC 5.5lb/MMcf -- 7.71E-04
Arsenic 2.00E-04lb/MMcf 90% 0.000006 --
Benzene 2.10E-03 lb/MMcf 0.000588 --
Benzo(a)pyrene 1.20E-06 lb/MMcf 0.000000 Beryllium 1.20E-05lb/MMcf 90% 0.000000 --
Cadmium 1.10E-03lb/MMcf 90% 0.000031 --
Chromium 1.40E-03lb/MMcf 90% 0.000039 --
Cobalt 8.40E-05lb/MMcf 90% 0.000002 --
Formaldehyde 7.50E-02 lb/MMcf 0.021015 --
Hexane 1.80E+00 lb/MMcf 0.504353 --
Lead 5.00E-041b/MMcf 90% 0.000014 Manganese 3.80E-04 lb/MMcf 90% 0.000011 --
Mercury,vapor 2.60E-04 lb/MMcf 0.000073 Naphthalene 6.10E-04 lb/MMcf 0.000171 --
Nickel 2.10E-03lb/MMcf 90% 0.000059 --
POM 8.82E-05 lb/MMcf 0.000025 --
Selenium 2.40E-05lb/MMcf 90% 0.000001 --
Toluene 3.40E-03 lb/MMcf 0.000953 --
Notes:
1. AP-42,Section 1.4,July 1998. Natural gas heating value of 1,020 Btu/cf and 100,000 Btu/therm.
2: Control efficiency from permit application applied to uncontrolled particulate emission factors.
Southern Veneer Specialty Products,LLC
Emission Source: Dry Waste System-Dry Waste Storage Silo
Source ID Number: ES-12,CD-21
Emission Point: EP-06,EP-12
2020 Actual Process Throughput:
Plywood Production 54,170,430 sf/yr
Emissions Summary:
Compound Emission Factor Reference Emissions
PM 9.29E-06 lb/sf I 0.25 tpy
P M 10 9.29E-06 lb/sf I 0.25 tpy
PM2.5 9.29E-06 lb/sf 1 0.25 tpy
References:
1. Emission factor from original Title V Permit Application
Southern Veneer Specialty Products,LLC
Emission Source: Sander System
Source ID Number: ES-04, CD-05
Emission Point: EP-05
This unit did not operate in 2020.
2020 Actual Process Throughput:
Sander Operation Production 0 sf/yr
Emissions Summary:
Compound Emission Factor Reference Emissions
PM 1.15E-05 Ib/sf 1 0.00 tpy
PM 10 1.15E-05 lb/sf 1 0.00 tpy
PM2.5 1.15E-051b/sf 1 0.00 tpy
VOC 1.51E-04 lb/sf 2,3 0.00 tpy
Acetaldehyde 1.77E-06 lb/sf 2 0.00 lb/yr
Formaldehyde 1.22E-06 lb/sf 2 0.00 lb/yr
Methanol 7.73E-06lb/sf 2 0.00 lb/yr
References:
1. Stack Testing Data, 1995
2. Historical industry-specific emission factors
3. VOC calculated as sum of VOC as C,formaldehyde,and 50%of methanol factors.
Southern Veneer Specialty Products, LLC
Emission Source: Dry Waste Transfer System
Source ID Number:ES-03, CD-06
Emission Point: EP-06
2020 Actual Process Throughput:
Hardwood Plywood Production 5,733,210 sf/yr
Softwood Plywood Production 48,437,220 sf/yr
Emissions Summary:
Softwood Hardwood
Compound Emission Factor Ref. Emission Factor Ref. Emissions
PM 6.60E-04 lb/sf 1 1.15E-05 lb/sf 1 16.02 tp
PM10 6.60E-04lb/sf 1 1.15E-05lb/sf 1 16.02 tpy
PM2.5 I 6.60E-04 lb/sf 1 I 1.15E-05 lb/sf 1 1 1 16.02 tpy
References:
1. Emission factor from original Title V Permit Application
Southern Veneer Specialty Products,LLC
Emission Source: Green Chip Sizing, Rechip, Transfer
Source ID Number: ES-17,ES-18, ES-14
Emission Point: EP-14
2020 Actual Process Throughput:
Tons Green Chips 20,336 ton/yr
Emissions Summary:
Emissions are fugitive in nature.
Specific emission factors are not available for rechipping operations. Rechipping emissions are
assumed to be similar to emissions from debarking. PM emissions for debarking are based on
the former AP-42 emission factor for drum debarkers and total amount of green material
processed by the rechipper;PM2.5= 19%of PM.
PM 0.024 lb/ton
PM 10 0.011 lb/ton
PM2.5 0.0046 lb/ton
Green Emission Annual Annual
Compound Material Factor Emissions Emissions
(t ) (lb/ton) Ob/ r) (TPY)
PM 20,336 0.024 488.06 0.24
PM10 20,336 0.011 223.70 0.11
PM2.5 1 20,336 1 0.0046 1 92.73 0.05
Southern Veneer Specialty Products,LLC
Emission Source: Plywood Waste Hog
Source ID Number: ES-16
Emission Point: EP-16
2020 Actual Process Throughput:
Tons Dry Wood 14,326 ton/yr
Emissions Summary:
Emissions are fugitive in nature.
Specific emission factors are not available for rechipping operations. Rechipping emissions are
assumed to be similar to emissions from debarking. PM emissions for debarking are based on
the former AP-42 emission factor for drum debarkers and total amount of green material
processed by the rechipper;PM2.5= 19%of PM.
PM 0.024 lb/ton
PM 10 0.011 lb/ton
PM2.5 0.0046 lb/ton
Green Emission Annual Annual
Compound Material Factor Emissions Emissions
(t ) (lb/ton) (lb/yr) (TPY)
PM 14,326 0.024 343.82 0.17
PM10 14,326 0.011 157.59 0.08
PM2.5 14,326 0.0046 65.33 0.03
Southern Veneer Specialty Products,LLC
Emission Source(s): Glue Operations and Pressing
Source ID Number(s): ES-13
Emission Point: EP-13
2020 Actual Process Throughput:
Hardwood Plywood Production 5,733,210 sVyr
Softwood Plywood Production 48,437,220 sf/yr
Hardwood Softwood Total
Compound Emission Units Ref. Unite Ref.
Emissions Emission Emissions Emissions
Factor ton/ r Factor . too/ r ton/yr
PM 2.00E-04 Ib/af 1 0.57 2.00E-04 Ib/sf 1 4.84 5.42
I'M10 2.00E-04 Ib/sf 1 0.57 2.00E-04 lb/sf 1 4.84 5.42
PM2.5 8.32E-05 Ib/sf 1 0.24 8.32E-05 Ib/sf 1 2.01 2.25
VOC(WPP1) 1.71E-04 Ib/sf 2 0.49 5.87E-04 Ib/sf 2 14.22 14.71
Hardwood Softwood Total
Compound Emission f. Emissions Emission Units Re Emissions Emissions
Factor Emits ReDLyr Factor f. lb lb/
yr
Acetaldehyde 1 3.61E-06 Ib/sf 1 174.86 174.86
Formaldehyde 5.00E-06 Ib/sf 2 28.67 5.00E-06 lb/sf 2 242.19 270.85
Methanol 1.11E-04 lb/sf 2 636.39 1.11E-04 lb/af 2 5,376.53 6,012.92
Methyl Ethyl Ketone 1 8.12E-07 Ib/sf 1 3933 39.33
Meth I[sobu 1 Ketone 1 8.17E-07 Ib/af I 39.57 39.57
Phenol 1.59E-05 Ib/sf 1 91.16 2.71E-06 Ib/sf I 1 1 131.26 222.42
References:
1.Historical industry-specific emission factors
PM10 is assumed to equal PM,and PM2.5 is assumed to equal condensable PM. Softwood factors for PM are used,as
hardwood factors are not available.
2.Press Compliance Test on December 10,2014. The WPP I VOC factor was developed per EPA OTM-26 method.
Southern Veneer Specialty Products,LLC
Emission Source: 250 HP Diesel-Fired Water Pump #1
Source ID Number: ES-19
2020 Actual Process Throughput:
Hours of Operation 26 Hr/yr
No.2 Fuel Oil Usage 260 gal/yr
Heat Input(250 hp) 16.5 MMBtu/yr
Compound Emission Factor Units Reference Emissions
ton/ r
CO 9.50E-01 lb/MMBtu 1 0.01
Ox 4.41E+00 lb/MMBtu 1 0.04
PM 3.10E-01 lb/MMBtu 1 0.00
PM 10 3.10E-01 lb/MMBtu 1 0.00
PM2.5 3.10E-01 lb/MMBtu 1 0.00
SO2 2.90E-01 lb/MMBtu 1 0.00
VOC 3.50E-01 lb/MMBtu 1 0.00
Compound Emission Factor Units Reference Emissions
lb/ r
Acetaldehyde(TH) 7.67E-04 lb/MMBtu 1 0.01268
Acrolein TH 9.25E-05 lb/MMBtu 1 0.00153
Benzene(TH) 9.33E-04 lb/MMBtu 1 0.01543
Benzo(a) ene (T) 1.88E-07 lb/MMBtu 1 0.00000
Formaldehyde(TH) 1.18E-03 lb/MMBtu 1 0.01951
Naphthalene (H) 8.48E-05 lb/MMBtu 1 0.00140
Toluene(TH) 4.09E-04 lb/MMBtu 1 0.00676
ylene Mixed Isomers(TH) 2.85E-04 lb/MMBtu 1 0.00471
POM 1.68E-04 lb/MMBtu 1 0.00278
References:
1. AP-42,Section 3.3,Tables 3.3-1 and 3.3-2,October 1996
Southern Veneer Specialty Products, LLC
Emission Source: 250 HP Diesel-Fired Water Pump#2
Source ID Number: ES-23
2020 Actual Process Throughput:
Hours of Operation 13 Hr/yr
No.2 Fuel Oil Usage 130 gal/yr
Heat Input(250 hp) 8.27 MMBtu/yr
Compound Emission Factor Units Reference Emissions
ton/ r
CO 9.50E-01 lb/MMBtu 1 0.00
Ox 4.41 E+00 lb/MMBtu 1 0.02
PM 3.10E-01 lb/MMBtu 1 0.00
PM10 3.10E-01 lb/MMBtu 1 0.00
PM2.5 3.10E-01 lb/MMBtu 1 0.00
SO2 2.90E-01 lb/MMBtu 1 0.00
OC 3.50E-01 lb/MMBtu 1 0.00
Compound Emission Factor Units Reference Emissions
lb/ r
Acetaldehyde(TH) 7.670E-04 lb/MMBtu 1 0.00634
Acrolein TH 9.250E-05 lb/MMBtu 1 0.00076
Benzene(TH) 9.330E-04 lb/MMBtu 1 0.00771
Benzo(a) ene (T) 1.880E-07 lb/MMBtu 1 0.00000
Formaldehyde(TH) 1.180E-03 lb/MMBtu 1 0.00976
ap,hthalene (H) 8.480E-05 lb/MMBtu 1 0.00070
Toluene(TH) 4.090E-04 lb/MMBtu 1 0.00338
lene Mixed Isomers(TH) 2.850E-04 lb/MMBtu 1 0.00236
POM 1.680E-04 lb/MMBtu 1 0.00139
References:
1. AP-42,Section 3.3,Tables 3.3-1 and 3.3-2,October 1996
Southern Veneer Specialty Products,LLC
Emission Source(s): Vat Operations
Source ID Number(s): ES-20
Emission Point: EP-20
2020 Actual Process Throughput:
Total Vat Production 95,283,000 sf/yr
Compound Emission Factor Units Reference Emissions
ton/ r
VOC-Hardwood 1.20E-05 Ib/sf 1,2 0.09
VOC-Softwood 7.70E-05 Ib/sf 1,2 3.06
Total VOC 3.16
Compound Emission Factor Units Reference Emissions
lb/yr
Acetaldehyde 4.67E-06 Ib,sf 1 444.97
Methanol 7.34E-06 lbisf 1 699.38
References:
1. AP42 Section 10.5 VOC softwood is sum of VOC compounds plus pinenes.
2. Hardwood and softwood vat production is ratioed based on log throughput(gum and poplar
vs pine,respectively).
Southern Veneer Specialty Products,LLC
Emission Source: Bark Hog
Source ID Number: IS-IN-1
Emission Point: IS-IN-1
2020 Actual Process Throughput:
Fuel Hogged 9,335 ton/yr
Emissions Summary:
Emissions are fugitive in nature.
Specific emission factors are not available for hogging operations. Hogging emissions are assumed to be
similar to emissions from debarking. PM emissions for debarking are based on the former AP42 emission
factor for drum debarkers and total amount of green material processed by the hogs;PM2.5=19%of PM.
The hog is located inside a building. A 95%control has been applied to account for building control.
PM 0.024 lb/ton
PM 10 0.011 lb/ton
PM2.5 0.0046 lb/ton
Green Emission Inside Annual Annual
Compound Material Factor Building Emissions Emissions
( ) (lb/ton) Control %) (lb/ r) (TPY)
PM 9,335 0.024 95% 11.20 0.01
PM 10 9,335 1 0.011 1 95% 5.13 1 0.00
1IM2.5 9,335 0.0046 95% 2.13 0.00
Southern Veneer Specialty Products,LLC
Emission Source: Core Chipping
Source ID Number: IS-IN-2
Emission Point: IS4N-2
2020 Actual Process Throughput:
Cores Chipped 1,642 ton/year
Emissions Summary:
Emissions are fugitive in nature.
Specific emission factors are not available for chipping operations. Chipping emissions are assumed to be
similar to emissions from debarking. PM emissions for debarking are based on the former AP-42 emission
factor for drum debarkers and total amount of green material processed by the chipper;PM2.5=19%of PM.
The chipper is located inside a building. A 95%control has been applied to account for building control.
PM 0.024 lb/ton
PM 10 0.011 lb/ton
PM2.5 0.0046 lb/ton
Green Emission Inside Annual Annual
Compound Material Factor Building Emissions Emissions
( ) (lb/ton) Control(%) (lb/ r) MY)
PM 1,642 0.024 95% 1.97 0.00
PM 10 1,642 0.011 95% 0.90 0.00
PM2.5 1,642 0.0046 95% 0.37 0.00
Southern Veneer Specialty Products,LLC
Emission Source: Green Veneer Hogging Operations
Source ID Number: IS_IN-3
Emission Point: IS—IN-3
2020 Actual Process Throughput:
Green Veneer Hogged 18,694 ton/year
Emissions Summary:
Emissions are fugitive in nature.
Specific emission factors are not available for hogging operations. Hogging emissions are assumed to be
similar to emissions from debarking. PM emissions for debarking are based on the former AP-42 emission
factor for drum debarkers and total amount of green material processed by the hogs;PM2.5=19%of PM.
The hog is located inside a building. A 95%control has been applied to account for building control.
PM 0.0240 lb/ton
P M 10 0.0110 lb/ton
PM2.5 0.0046 lb/ton
Green Emission Inside Annual Annual
Compound Material Factor Building Emissions Emissions
(t y') (lb/ton) Control(%) b/ r (TPY)
PM 18,694 0.024 95% 22.43 0.01
PM 10 18,694 1 0.011 95% 10.28 0.01
PM2.5 18,694 0.0046 95% 4.26 0.002
Southern Veneer Specialty Products,LLC
Emission Source: Ink and Painting Operations
Source ID Number: IS-IN4,IS-IN-5
Emission Point: IS-IN4,IS-IN-5
2020 Actual Process Throughput:
Logo paint usage 18 gal/yr
Ink usage 150 gal/yr
Ink density 8.21 lb/gal
Emissions Summary:
Compound Emission Factor Reference Emissions
VOC-too paint 4.00E-01 lb VOC/gal 1 0.00 tpy
VOC-ink 2.00E-01 lb VOC/gal 1 0.12 tpy
Total VOC 0.13 y
References:
1. Safety Data Sheets
Southern Veneer Specialty Products,LLC
Emission Source: Maintenance Parts Washer
Source ID Number: IS-IN-7
Emission Point: IS-IN-7
This unit did not operate in 2020.
2020 Actual Process Throughput:
Gallons Purchased: 0 gaVyr
Emissions Summary:
Compound Emission Factor Reference Emissions
VOC 6.58 lb/gal 1 0.00 tpy
References:
1. Safety Data Sheet
Southern Veneer Specialty Products,LLC
Emission Source: Veneer Diverter Exhaust Cyclone
Source ID Number: IS-IN-8
Emission Point: IS-IN-8
2020 Actual Process Throughput:
Green Veneer 70,878 ton/yr
Emissions Summary:
Compound Emission Factor Reference Emissions
PM 1.40E-02 lb/DT 1 0.25 tpy
I'M 10 1.40E-02 lb/DT 1 0.25
References:
1. Weyerhaeuser Test Data,Title V Bulletin#19,average green chips factor
Southern Veneer Specialty Products,LLC
Emission Source: Green Veneer Stackers
Source ID Number: IS-IN-9,IS-IN-10
Emission Point: IS-IN-9,IS-IN-10
2020 Actual Process Throughput:
Green Veneer 70,878 ton/yr
Emissions Summary:
Compound Emission Factor Reference Stacker
Emissions
PM 1.40E-02 lb/DT 1 0.25 tpy
I'm 10 1.40E-02 I lb/DT 1 0.25 tpy
References:
1. Weyerhaeuser Test Data,Title V Bulletin#19,average green chips factor
Southern Veneer Specialty Products,LLC
Emission Source: Hammer Hog Truck Dump
Source ID Number: IS-IN-11
Emission Point: IS-IN-11
2020 Actual Process Throughput:
Dry waste 1,200 ton/yr
Emissions Summary:
Emissions are calculated use the"drop loading equation"from AP42 Section
13.2.4(Aggregate Handling and Storage Piles),November 2006.
AP-42 Section 13.2.4: l 5) 3
E Ob/ton) =k x 0.0032 x(\ ),4
where: `2"
E=emission factor
k=particle size multiplier(dimensionless)
U=mean wind speed(mph)
M=material moisture content(%)
k= 0.74 For PM
k= 0.35 For PMIo
k= 0.053 For PM2.5
U= 6.88 mph for Charlotte,NC(nearest major city)from 2008-2012 Charlotte met data
M= 50 %,Wood assumed to have average moisture content of 50%based on AP-42,
Section 1.6,Wood Residue Combustion in Boilers,Sept.2003
Therefore,emission factors(lb PM per ton)_
PM factor= 3.96E-05 lb/ton
PMIo factor= 1.87E-05 lb/ton
PM2.5 factor= 2.83E-06 lb/ton
Compound Emission Factor Emissions
PM 3.96E-05 lb/ton 0.00 tpy
PM 10 1.87E-05 lb/ton 0.00
PM2.5 2.83E-06 lb/ton 0.00tpY
Southern Veneer Specialty Products,LLC
Emission Source: Dry Waste Truck Dump
Source ID Number: IS-IN-12
Emission Point: IS-IN-12
2020 Actual Process Throughput:
Dry waste 980 ton/yr
Emissions Summary:
Emissions are calculated use the"drop loading equation"from AP-42 Section
13.2.4(Aggregate Handling and Storage Piles),November 2006.
AP-42 Section 13.2.4: E(Ib/ton) =k X 0.0032 X`5
Illl
where: JJII
E=emission factor
k=particle size multiplier(dimensionless)
U=mean wind speed(mph)
M=material moisture content(%)
k= 0.74 For PM
k= 0.35 For PMIo
k= 0.053 For PM2.5
U= 6.88 mph for Charlotte,NC(nearest major city)from 2008-2012 Charlotte met data
M= 50 %,Wood assumed to have average moisture content of 50%based on AP-42,
Section 1.6,Wood Residue Combustion in Boilers,Sept.2003
Therefore,emission factors(lb PM per ton)=
PM factor= 3.96E-05 Ib/ton
PMIo factor= 1.87E-05 lb/ton
PM2.5 factor= 2.83E-06 lb/ton
Compound Emission Factor Emissions
M 3.96E-051b/ton 0.00 tpy
M10 1.87E-05 lb/ton 0.00 tpy
M2.5 2.83E-06 lb/ton 0.00 tpy
Southern Veneer Specialty Products,LLC
Emission Source: 17 kW Propane-Fired Generator
Source ID Number: IES-GEN1
2020 Actual Process Throughput:
Hours of Operation 12 Hr/yr
Factor Fuel Units Source
Engine Power Rating 22.8 hp
Default Engine Average Fuel Consumption 7,000 Btu/hp-hr AP-42 Section 3.3
Generator Equivalent Heat Input(Actual) 1.85 MMBtu/yr Calculation
Compound Emission Factor Units Reference Emissions
ton/ r
CO 3.86E-01 lb/MMBtu 1 0.00
Ox 3.17E+00 lb/MMBtu 1 0.00
PM 4.83E-02 lb/MMBtu 1 0.00
PM10 3.84E-02 lb/MMBtu 1 0.00
PM2.5 3.84E-02 lb/MMBtu 1 0.00
SO2 5.88E-04 lb/MMBtu 1 0.00
VOC 1.20E-01 lb/MMBtu 1 0.00
Compound Emission Factor Units Reference Emissions
Ib/ r
Acetaldehyde(TH) 7.76E-03 lb/MMBtu 1 0.01437
Acrolein(TH) 7.78E-03 lb/MMBtu 1 0.01440
Benzene(TH) 1.94E-03 lb/MMBtu 1 0.00359
Benzo(a) ene(T) 5.68E-09 lb/MMBtu 1 0.00000
Formaldehyde(TH) 5.52E-02 lb/MMBtu 1 0.10220
Naphthalene (H) 9.63E-05 lb/MMBtu 1 0.00018
Toluene(TH) 9.63E-04 lb/MMBtu 1 0.00178
Xylene Mixed Isomers(TH) 2.68E-04 lb/MMBtu 1 0.00050
References:
1. No emission factors are available for propane IC engines,emission factors were obtained from AP42,
Section 3.2,Table 3.2-1 (July 2000).
Southern Veneer Specialty Products,LLC
Emission Source: Hog Fuel Storage Silo
Source ID Number: IES-GWS(ES-11)
Emission Point: EP-11
2020 Actual Process Throughput:
Hog Fuel 9,335 ton/yr
Emissions Summary:
Emissions are calculated use the"drop loading equation"from AP-42 Section
13.2.4(Aggregate Handling and Storage Piles),November 2006.
AP-42 Section 13.2.4: (U)1.3
E(lb/ton) =k x 0.0032 x 5(m)1.4
5l
where: \ 2
E=emission factor
k=particle size multiplier(dimensionless)
U= mean wind speed(mph)
M=material moisture content(%)
k= 0.74 For PM
k= 0.35 For PMIO
k= 0.053 For PM2.5
U= 6.88 mph for Charlotte,NC(nearest major city)from 2008-2012 Charlotte met data
M= 50 %,Wood assumed to have average moisture content of 50%based on AP-42,
Section 1.6,Wood Residue Combustion in Boilers,Sept.2003
Therefore,emission factors(lb PM per ton)=
PM factor= 3.96E-05 lb/ton
PMio factor= 1.87E-05 lb/ton
PM2.5 factor= 2.83E-06 lb/ton
Compound Emission Factor Emissions
PM 3.96E-05 lb/ton 0.00 tpy
PM 10 1.87E-05 lb/ton 0.00 tpy
PM2.5 2.83E-06 lb/ton 0.00ITZ