AQ_F_0700151_20180927_EI_Cmb-EI-File

2017 Emissions Inventory Review / Data Tracking Form
Facility Name: Iconic Marine Group, LLC Facility ID: 0700151
Facility Assigned to: Data Entry: Beaufort County
Classification: Yongcheng Chen YC Confidential Copy Submitted?
Title V YES
Initial Review/Data Entry
Enter date received into ED. Date Received:
gn appropriate Assigned: _f/� S Date Due:
PJ� Assigned to a ro riate individual. Date Assi ed: 9
2/Paper copy submitted: One copy received with supporting documentation,certification form signed by responsible official,and
rppears generally complete;
0/Electronic copy submitted: All supporting documentation and certification form(with time/date stamp)signed by responsible
official has been received. I L
Comments:
Inventory Review
Er All forms and supporting documentation appear to be complete if paper submission(check ED OS data if electronic).
93"'Contact,address,phone number changes entered into I-Beam/Facilities if necessary.
Er All known operating scenarios,control devices,and emission release points have been entered for each emission source(permitted,
insignificant,and unpermitted)or note that the emission source was not operated or not required to report.
Check if SCC codes for each OS are accurate and update if needed.
Evaluate"U"sources for significance and address according to policy.
Calculations/forms appear to add up correctly.
All compliance issues are being addressed(e.g.Toxics limits,above TV thresholds,large emissions increase/decrease, installation
without a permit).
All volatile HAPs/TAPs were included in the VOC total.
'Er Calculations and control efficiencies appear correct. Emission factors are the best available and most current factors appropriate
for the reporting facility(e.g.stack testing,AP-42,etc.).
Review facility comments and address any issues.
Er Update ED(Data Entry Main)if additional information is required(corrections due date and date received).
U Check all ED QA/QC reports.
❑^ Comparison with previous emission inventory must be made and outliers(> 10%)must be investigated and explained.
� t inventory review comments and summarize any changes in ED-Data Entry Main"DAQ internal comments".
o Print and attach the facility total report.
Date Info Requested: Date Info Received: — Total Days on Hold:
Date Review Complete: Z 7 ?.J Signature: 40 dLtr--
Date Submitted to EI Coordinator: 11 z-7/ 20 0
Date Approved: Initials: '

FacilityTotal CY 2017 Emission Summary Recorded in ED Facility H)#: 0700151
ry �
Facility Name: Iconic Marine Group.LLC Permit 9(s): 10534R00
Green House Gases Pollutants(GHG) Actual Emissions
Tons/Yr
Pollutant CAS
Uemini- Change
Inns
Not Not h;A
Reported Reported
CO2 equivalent(sum of individual GHG pollutant emission No GHGs
times their 1995 IPCC Global Warming Potential(GWP), Reported
converted to metric tons)
Criteria Pollutants Actual Emissions
(Tons/Year)
Pollutant CAS CY 2017 CY 2015 Demini-
from ED from Fees mus Change
PM(TSP) TSP 0.450000 Not 0.5 A
Reported
PM10 PM10 0.220000 Not 0.5
Reported
PM2.5 PM2.5 0.110000 Not 0.5 A
Reported
VOC V()c 13.40 0.000000 0.5 N/A
Hazardous Air Pollutants Actual Emissions
(BAPS) (Poonds/Vear)
pon.t.lpd/or Toxic Air Pollutants (AS CY 2017 CY 2015 Demini- `N)
(TAPS) from ED from Fees mus Change
Diethyl aniline,N,N- 121-69-7 4.20 Not 100.0 N/A
Reported
Dimethyl phthalate 131-11-3 0.300000 Not 10.0 N/A
Reported
Ethyl benzene 100-41-4 4.60 Not 100.0 EN/A
Reported
MEK(methyl ethyl ketone,2-butanone) 78-93-3 315.60 Not 1000
Reported
Methyl methacrylate 80-62-6 2,633.50 Not 1,000.0 N/A
Reported
Styrene 10042-5 21,668.90 0.000000 100.0 N/A
Toluene 108-88-3 25.50 Not 100.0 N/A
Reported
08/07/2018 Pnre 1 of

Facility Total CY 2017 Emission Summary Recorded in ED Facility II)#: 0700151
Facility Name: Iconic Marine Group,LLC Permit#(s): 10534R00
Hazardous Air Pollutants Actual Emissions
(HAPs) (Pounds/Year)
1 ollutap CAS
d/or Toxic Air Pollutants _ CY 2017 CY 2015 Demini- %
(TAPS) from ED from Fees mus Change
Xylene(mixed isomers) 1310-20_7 38.40 Not 100.0 N/A
Reported
Largest Individual HAP Styrene 21,668.90 Ibs
Total HAP Emissions 24.375.40lbs
Largest Individual CAP VOC 13.41)tons
Total CAP Emissions 13.62 tons
Total TAP Emissions 22,048.40 lbs
Total Aggregate 13.62 tons
Emissions
DAO's Comments Reeardine Inventory
08/07/2018 Page 2 of 2

Original COPY of RECORD Date Submitted: 6/16/2018 09:38:49
Inventory Certification Form(Title V)
Facility Name: Iconic Marine Group, LLC Facility ID :0700151
1653 Whichards Beach Road Permit: 10534
Washington,NC 27889 County: Beaufort
DAQ Region : WARO
North Carolina Department of Environment and Natural Resources
Division of Air Quality
Air Pollutant Point Source Emissions Inventory—Calendar Year 2017
These forms must be completed and returned even if the facility did not operate or emissions were zero
The legally defined "Responsible Official" of record for your facility is Mike Fiver
This person or one that meets the definition below must sign this certification form.
The official submitting the information must certify that he/she complies with the requirements as specified in Title 15A
NCAC 2Q.0520(b)which references and follows the federal definition. 40 CFR Part 70.2 defines a responsible as meaning one
of the following:
1. For a corporation: a president, secretary,treasurer,or vice—president of the corporation in charge of a principal
business function,or any other person who performs similar policy or decision making functions for the overall
operation of one or more manufacturing, production, or operating facilities applying for a or subject to a permit and
either
i.the facilities employ more than 250 persons or have gross annual sales or expenditures exceeding$25
miilion(in second quarter 1980 dollars);or
ii. the delegation of authority to such representatives is approved in advance by the permitting authority;
2. For partnership or sole propietorship; a general partner or the proprietor, respectively;
3. for a muncipality, state,federal,or other public agency includes the chief executive officer having responsibility for the
overall operations of a principal geographic unit of the agency(e.g., a Regional Administrator of EPA).
��FRTIFTCATIQN STATEMENT
'ImWrtant7 Legally Reaponsible Official, read and sig13 after all submisai-Q��
certify that I am the responsible official for this facility, as described above, and hereby certify that the information contained
n this air emissions report, including attached calculations and documentation, is true,accurate and complete. (Subject to legal
enalities of up to $25,000 per occurrence and possible imprisonment as outlined in G.S.§143-215.3(a)(2))
Responsible Official's Signature Below use blue ink): Date Signed:
Printed Name: Mike F
6�Z�/ZoiB
Signature.
This form applies to Title I ilities. If this facility is not classified as Title V,please telephone your regional office Emission
Inventory contact at once for proper forms.
'D r
com `
Email address of Responsible Official: [e-mail]
n 2 7 2 �$
Information on this Form cannot be held confiden al =—
Original COPY of RECORD Date Submitted: 6/16/2018 09:38:49 1

Iconic Marine Group
2017 Emission Inventory Calculations
VOC,HAP and PM Emission Calculations
This document describes actual Volatile Organic Compound(VOC),Particulate Matter(PM)and
Hazardous Air Pollutant(HAP)emissions from the facility. In accordance with AP-42 section
Section 4.4(updated 5/08),emission calculations use ANSI/ACMA/ICPA UEF-1-2011a
Estimating Emission Factors from Open Molding Composite Processes which utilize the Unified
Emission Factors(UEF)for open molding of composites dated October 5,2011. An attached
table lists the basis for each emission factor(E-factor)utilized in the emissions calculations. A
copy of the October 5,2011 UEF table is also included with this letter.
The gelcoat spray guns are atomized. The styrene emission factor used for gelcoats is from the
gelcoat application row of the UEF table. The Methyl Methacrylate(MMA)emission factor used
for gelcoats is based on the MMA gelcoat application row of the UEF table. The resin guns are
non-atomized. The emission factor for lamination resins is taken from the mechanical non-
atomized row of the UEF table.
Small quantities of highly reactive liquid organic perioxide solutions(e.g.,Hi Point 90)are used
by the reinforced plastics industry to initiate the polymerization reaction in the resin or gelcoat
material. Emission estimates in this permit application are based on the composite Manufacturer
Associations' study,"Emission Factors for Liquid Organic Peroxide Catalysts used in the Open
Molding of Composites." The emission factor for Dimethyl Phthalate(DMP)or other utilized
organic is 0.04%of the available DMP by weight or 0.0144(0.04 x 36%).
Usage of and thus emissions from other raw materials(e.g.,mold cleaners and sealers,etc.)at the
Washington plant are smaller in nature. Emissions from these other material usages and/or
chemicals utilize a similar methodology or conservatively assume all of the chemical is emitted
(e.g.,solvents in paints used).
Particulate emissions from painting are calculated assuming a 1%total weight loss with 50
percent of those emissions PMio and 25 percent of those emissions PM2.5 as a conservative
estimate with no controls.
Particulate emissions from paint usage:
600 lbs paint bought plant-wide
assume 1%loss as particulate emissions,50%of that is PMio and 25%is PM2.5
1,800 lbs x 0.01 = 18.0 pounds PM/year=0.009 tons PM/year
18.0 lbs PM x 0.5=9.0 pounds PMio/year=0.0045 tons PMio/year
18.0 lbs PM x 0.25=4.5 pounds PM2.5/year—0.0023 tons PM2.5/year
Particulate emissions from hull and deck grinding:
351,000 lbs resin and gelcoat bought plant-wide
assume 1%loss with 25%of that emitted as particulate emissions,50%of that is PMjo and 25%
is PM2.5.

Iconic Marine Group
2017 Emission Inventory Calculations
351,000 lbs x 0.01 x 0.25=878 pounds PM/year=0.44 tons PM/year
878 lbs PM x 0.5=439 pounds Midyear=0.22 tons Midyear
878 lbs PM x 0.25=219 pounds PM2.5/year=0.11 tons PM2.5/year

A
b EF Table 1: Unified Emission Factors for Open Molding of Composites
N Revised and Approved 101;13!2t109
e
Er3Rsslon Rate in Pounds of Styrene Emitted per Ton of Resin or(ielco 1 Processed
Styrerx wntant M rcsxvpstrcar.h a33 lay 33 3a lb 36 37 16 19 40 i Ji a 47 1 N 45
46 47 a49 50 ,yp
Man" 0.126a%styrmes7000 c2 c0 Od "- "- n2 "-1 t2.'+ li4 1a0 140 152 103 tE-0 '7a 1^l n0.226. 11.0037Y Z.iI
Man"rf Vapor Suppressed Resin VSR" Mrinai aorlssfdn faotot IebC Moor! a ;I 1i.4+apwe!Ie VSR rWmear taemr b exh rnava�pFreasx+ am; - _
111aehunkal Alwn¢ed 0 199.%sIr.a 2600 111 1 1:b I lA0 1'54 108 fail 197 211 Y17 1 246 2154 1 200 I 293 1 267 1 211 1 320 1 NG I 3!4 F NO 714 r%sryrerr) 0 it)s MD0
~Ianeai Alowlsed rim VSft" Medlatiuf Atawaed mission fatter r+sxa about, + I l -4 45+spuds VSR rM.pY tatty-w tach m,,i w*ssan.armula:cn 1 ._.
MCW n"Atarnad Cmbolied Syray'4 0.130 s%styrene a 2000 EC V' I 103 1 '19 1 1301 141 1 152 1 l et 1 174 1 169 1 100 207 210 1 229 1 240 I 2e 1 j 202 I^'0 0.77 s((0.714 x%styrene) 0.10}x 2000
14tft.kal CormoNed Spray rkh VSR Mochrtkat Atomusd CmN011ad Spay arsls{mn faelm::mod adores_ . +1 iC4!+spftc VSFreductmfslmbraar]'nsnsa WpK ,Sams),;
Maeharacof Nm Atmnysad 0 107 r%sty a 2000 1 71 1 74 1 7' 1 SO 1 83 1 9e 1 e? 1 03 1 to V,I 1 C2 1 135 1 i oe I •11 1 115 1 is 124 1 (to 157 x%Vyamlo).001951 x 290t
Meelta M fbmrVmn¢d oith VSR{ Mnchanisaf Nm-AOtmlaed emaswn factor'hate:axee1 s it-1045.sos_Me VSR rtuunon foIIW boa.n rKaudrapndban for.luatull
fd.hanW NW-Aeomdd applma:. of res+ns ma
COntYn*.thy,stymnt...or`^ MechameW Nm Atomized Stytatle morn~oWision Faster 01std mod.)x.55
Morhankal N.AWrmed FM OCPO lesm4(111 01"116 styrene a 20M 0! A 101 'C4 134 111 114 111 123 124 12' 1K. 132 130 140 143 '4t! 14D tr9.t$03 s%etyrtnel 00051+2COC
R. tapphcdm 0184a%stpones 2000 ice^ L7 133 '39 tU 140 155 16C 1N 171 1". is.I 16E '63 1W I 2Ca 21C 21E i(02744 s%airmt) 0029d1+2M
Fdament aWkatwn vI t VSR" 0.120 a%styrene a 20M 70 a3 BD 00 03 07 t00 104 133"835
11 115 116 1 2 1:5 IN 133 '3E 14C 0.95 x(10.2746 a%slynns)-0.029d1 s 3000
C koar AppAce.on 0.4t3 a%styrene s 1000 2Ps 3*" 333 3•JS 7 3W 419 439 01 SC 7 022 343 �50"4 e94 SC'. Ke (n.03649 4%styrene) OtSlfx2000
0.GGekdar Conboad Spy Amoacadkn` 0.325s%styrene a 2000 213 230 245 2e3 215 200 205 32t 1 3M 30, aye 427 M2 457 472 0.1I a(it Ai6t[a%styran<I 01951a2000
Gokoat N.AtidAplr0EatmWI SEEE Note S±aew Toe 203 214 223 212 241 .51 2S0 70 -61 20e Ke ?23 332 ?A' 'ac 0045" %Sir.)-0090%.2000
I..Atomiaod Gofoaad Applicatbn'.2 fer•70.0.>Zlx%seymek 2:0 241 2S' :e4 2?8 26' 200 VI 34 340 33' Y0 361 '+ ( 7r 1 ix2000 '_< -02 aC4 4/9 a28 t 0�47 x%s sm 0 07025 a 2900
Cmorod.CYA a9r Rol Ow Nm+.VSR pgMsa amiNim lataer Iwrd afrrnj > C 90 for Mango on C 6!M MecKu III
Cayered4;mo of Mm RoS-Ow Non-VSR process emfssionfxsm psaw atowl . C SC for VU - vn:eb W Mfc^ar.a;.
Emassion Rate in Pounds of Methyl Methacryiate Emitted per Ton of Gelcoat Processed
MMA tuMent to gakon.% 1 } ] a 5 9 7 0 1 9 10 11 8 0 14 IS 16 t7 1; 16 13 _-.
n
OM tort+tylkaNm 15 _ 4' C: 6n uE 122 13!1 ltO 11511 lea 1 '65 1 2-c 1 --4-1 2 c .`'Al,': �
NoM n' :nyaudnD i•/rse nsyaur cuaarc as s,tOlnd P-..a arty 4xta fryel•+e rnoncnr at•E] y :1 cu:! c:'�.r.:1Idle atMrves sa:f as Ww¢bs.f.rs,21n1_ e¢
2 Fpn Ix nartras rah spen stxasN•33%we Used m to*oISsRA fare at"% o^sam emaso*lxw excrKsd as Wfcem of a at*my"'.arN far Wt :faxent>`.CL:.r-'M er1 S pass?Corr]N x:raps.at4 'a:w•ec.€: s;nfse
are act baud on test ss5 bu�paaartt 10 M CMt•eTNe 1FamitK �e yaRN b'Y F�Ier1a n 1M Ur'n;ras Sf1orM tN glut as a salt4n For entlpN.N4Ir'!nput awe O IC fp a rasa tort.. ,:•-4 xrMrlt 4ry nt n
7ek V3R neutron facto s wtamE dy teslas0 each ryrvtappft{dJN fdfnNVllm.0*p q m B pocsdlnes detaoed n M CFA Vaper Sap/nssam Eiifm nros teat
SEE rk CFA ConpdNd spay ftamlOma+a a axa oa sep:rpmn of"x•nored sorry vwfarK 0
! 'M star:d vapor swwat{area r1 ervas,om hen 51 ft ankdp o aims s baud m dte no.F'I3tmerrr Ira ding Enrico.Sft*
v "Go"If~^*corner mnere as M*PW 0.ab esta WA m xrr+r aaded by the-east.tha befue sastxr O cM aootm wen as asroers,'/lms.pass., es, n
? 8asoc a'peepN data tern W WA Emk{idn snwy C
8 SEE S»tuy 17.2ID'EEC'_fe0an Esesaym Factor for Non-Atmniaed Applisatkov of Ge1 Caads aed n Nee Opine MWdnp of Compositor ter a dalaled ft.VIa1 t1111a rg ~csd 0s'cotl leuup T
w 0 use ba"wtsw 004606 a%styrene{-6.05037 x 20001n 90koits wih sly,":oltenn teloeen"h xw 3 ty W..: -.se?e asdandn 0163 a%styrene a 2000 fof 0talca s"W iess than I^went:: n Oe W.
'C ReNr 10 ieCon 10.tnsirsv-twos st+d E>anp+K for ne Ennssa4 Fad hbe.3 2 Ceroulaapl of" oily,5"^ Wta ;a
t Aso this rpoeyr br a+v npnatmsa4d appu alion of OCPO o•DCV CG oserd rpcm.trh9n fdNd to 90%W IWI by Repo 1J
Tame Apra 30%TO 32% clymr+t roment 30 31 32IL
O
124 20E 2t9 .a
G

Iconic Marine Group Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical N (%)
3MFillet 3MFillet Mechanical Non-Atomized Styrene 28.90% 0.0309
6441-800 Resin(6441 A00) No emissions Cobalt Naphthenate 0.07% 0.0000
6441-800 Resin(64414t00) No emissions Cobalt Neodecanoate 0.07% 0.0000
6441-800 Resin(644"00) Mechanical Non-Atomized Styrene 34A9% 0.0385
707061 EZ Sanding Grey Primer(707-061) NIA—assume all emitted Methyl Ethyl Ketone 4.80% 0.0480
707061 EZ Sanding Grey Primer(707-061) WA—assume all emitted Styrene 16.60% 0.1660
945GA104 Green Tooling Gelcoat(945GA104) No emissions Cobalt 2-Ethylhexanoate 0.06% 0A000
945GA104 Green Tooling Gelcoat(945GA104) No emissions Cobalt Neodecanoate 0.04% 0.0000
945GA104 Green Tooling Gelcoat(945GA104) Gelwat Application-MMA Methyl Memacrylate 4.15% 0.0375
945GAID4 Green Tooling Gelcoat(945GA104) Gelcoat Application Styrene 42.30% 0.2505
945YA058 Polycor Up Orange Tooling Gelcoat(945YA0 N/A—assume all emitted Ethylbenzene 0.17% 0.0017
945YA058 Polywr IJF Orange Tooling Gelcoat(945YA0 Gelwat Application-MMA Methyl Methacrylata 4.00% 0.0300
945YA058 Polywr OF Orange Tooling Gelcoat(945YA0 Gelwat Application Styrene 41.80% 0.2405
AME100IT30 Resin(AME1001T30) No emissions Cobalt 2-Ethylhexanoate 0.11% 0.0000
AME1001T30 Resin(AME1001T30) No emissions Cobalt Hydroxide 0.01% 0.0000
AME1001T30 Resin(AME1001T30) No emissions Cobalt Neodecanoate 0.05% 0.0000
AME1001T30 Resin(AME1001T30) Mechanical Non-Atomized Styrene 34.01% 0.0345
AME1001T35 Resin(AME1D01T35) No emissions Cobalt 2-Ethythexanoate 0.11% 0.0000
AME1001T35 Resin(AME1001T35) No emissions Cobalt Hydroxide 0.01% D.0000
AME1001T35 Resin(AMEID01T35) No emissions Cobalt Neodecanoate 0.05% 0.0000
AME1001T35 Resin(AME1001T35) Mechanical Non-Atomized Styrene 33.90% 0.0345
AME1001T40 Resin(AME1001T40) No emissions Cobalt 2-Ethylhexanoate 0.11% 0.0000
Page 7 of 6

Iconic Marine Group Washington Plant Emission Factor Documentedon
Weight% E-Factor
Product Number Product Name LIEF Row Chemical (%) (%)
AME100IT40 Resin(AME1001T40) No emissions Cobalt Hydroxide 0.01% 0.0000
AME1001T40 Resin(AME1001T40) No emissions Cobalt Neodecanoate 0.05% 0.0000
AME1001T40 Resin(AME1001T40) Mechanical Non-Atomized Styrene 33.88% 0.0370
AME6001160 Infusion Resin(AME6001160) No emissions Cobalt 2-Ethylhexenoate 0.16% 0.0000
AME6001160 Infusion Resin(AME6001160) Mechanical Non-Atomized Styrene 39.08% 0.0465
AME6001T45 Resin(AME6001T45) No emissions Cobalt 2-Ethylhexanoale 0.08% 0.0000
AME6001T45 Resin(AME6001T45) No emissions Cobalt Hydroxide a01% 0.0000
AME6001T45 Resin(AME6001T45) No emissions Cobalt Neodecanoate 0.03% 0.0000
AME6001T45 Resin(AME6001T45) Mechanics]Non-Atomized Styrene 34.03% 0.0370
Ajay1201 Arley Fillet Putty(1201) Manual Styrene 35.00% 0.0470
May4501 Ajay Fillet Putty(4501) Mechanical Non-Atomized Styrene 37.00% 0.0415
Aday7121 Arlay Fillet Putty(7121) Mechanical Non-Atomized Styrene 31.00% 0.0332
AxCX500 XTEND(CX-500) NIA—assume all emitted Methyl Ethyl Ketone 40.00% 0.4000
AXCX500 XTEND(CX500) N/A—assume all emitted Toluene 30.D0% 0.3000
AXCX500 XTEND(CX-500) N/A—assume at emitted Xylene(mixed isomers) 30.00% 0.3000
B70 Corebond Adhesive(070) NIA—assume all emitted Dimethylaniline 0.22% 0.0022
B70 Corebond Adhesive(B70) Manual Styrene 32.21% 0.0406
B71 Corebond Adhesive(B71) Manual Styrene 34.90% 0.0470
BGMRR8015 Black Gelcoat(BGMRR80t5) No emissions Cobalt 2-Elhylhexanoate 0.12% 0.0000
BGMRR8015 Black Gelcoat(BGMRR8015) No emissions Cobalt Neodecanoate 0.01% 0.0000
BGMRR8015 Black Gelccal(BGMRR8015) Gelcoal Application-MMA Methyl Methacrylate 4.60% 0.0375
BGMRR8015 Black Gelcoat(BGMRR8015) Gelcoat Application Styrene 40.37% 0.2300
BPOPaste Green SPO Paste H50 N/A No reportable HAPs 0.00% 0.0000
Page 2 of 6

Iconic Marine Group Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical (%) (%)
CadoxD50 Catalyst(Gadox D50) N/A—assume all emitted Methyl Ethyl Ketone 2.00% 0.0200
CadoxD50 Catalyst(Cadox D50) WA No reportable HAPs 0.00% 0.0000
CHL 15 Chemlease 15 N/A No reportable HAPs 0.00% 0.0000
CHL 2697 Chemlease Sealer 2697 WA No reportable HAPs 0.00% 0.D000
CHL MC Chemlease Mold Cleaner NIA—assume all emitted Methyl Ethyl Ketone 50.D0% 0.5000
CHL MC Chemlease Mold Cleaner N/A No reportable HAPs 0.00% 0.0000
DC2000 Clear(DC2000) N/A No reportable HAPs 0.00% 0.0000
DCU2021 Clear(DCU2021) N/A—assume all emitted Ethylbenzene 5.30% 0.0530
DCU2021 Clear(DCU2021) N/A—assume all emitted Methyl MethacMate 0.20% 0.0020
DCU2021 Clear(DCU2021) N/A—assume all emitted Styrene 0.40% 0.0040
DCU2021 Clear(DCU2021) N/A—assume all emitted Xylene(mixed isomers) 30.10% 0.3010
DCX61 Hardener(DCX61) N/A No reportable HAPs 0.00% 0.0000
DDM-9 Luperox DDM-9 Catalyst WA—assume all emitted Methyl Ethyl Ketone 2.00% 0.02D0
DDM-9 Luperox DDM-9 Catalyst WA No reportable HAPs 0.00% 0.0000
DT870 Reducer(DT870) N/A—assume all emitted Toluene 19.00% 0.1900
DT885 Reducer(DT885) NIA—assume all emitted Ethylbenzene 0.90% 0.DD90
DT885 Reducer(DT885) N/A—assume all emitted Methyl Ethyl Ketone 19.00% 0.1900
DT885 Reducer(DT885) N/A—assume all emitted Toluene 10.50% 0.1050
DT885 Reducer(DT885) N/A—assume all emitted Xylene(mixed isomers) 5.20% 0.0520
Flex-Z Flex-Z 1,2,3,4,5&6 NIA No reportable HAPs 0.00% 0.0000
GGLE4186 Aqua Mist Gelcoat(GGLE4186) No emissions Cobalt 2-Ethylhexanoate 0.D9% 0.0000
GGLE4186 Aqua Mist Gelcoat(GGLE4186) No emissions Cobalt Neodecanoate 0.02% 0.0000
GGLE4186 Aqua Mist Gelcoat(GGLE4186) Gelcoat Application-MMA Methyl Methacrylate 2.99% 0.0225
Page 3 o/d

Iconic Marine Group Washington Plant Emission Factor Dowmenlatim
Weight% E-Factor
Product Number Product Name UEF Row Chemical (%) (%)
GGLE4186 Aqua Mist Gelcoat(GGLE4186) Gelcoat Application Styrene 25.25% 0.1124
H834RAA30 Polyester Resin(1­1834RAA30) Mechanical Non-Atomized Styrene 3.4.10% 0.0385
H834RAA35 Polyester Resin(H834RAA35) Mechanical Non-Atomized Styrene 34.10% 0.0385
H834RAA40 Polyester Resin(HB34RAA40) Mechanical Non-Atomized Styrene 34.10% 0.0385
HIPt 90 Hi Point 90 N/A—.04%emitted per Ind guide Dimathyl Phthalate 36.00% 0.0001
HiPt 90 Hi Point 90 N/A—assume all emitted Methyl Ethyl Ketone 1.00% 0.0100
Honeywax Honey Wax(P52314R) NIA No reportable HAPs 0.00% 0.0000
10517 Patch Booster(10517) Gelcoat Application-MMA Methyl Methacrylate 17.00% 0.1275
10517 Patch Booster(10517) Manual Styrene 40.00% 0.0615
10517 Patch Booster(10517) WA—assume all emitted Xylene(mixed isomers) 2.00% 0.0200
LGLE4214 Blue Gelcoat(LGLE4109) No emissions Cobalt 2-Elhylhexanoate 0.06% 0.0000
LGLE4214 Blue Gelcoat(LGLE4109) No emissions Cobalt Hydroxide 0.01% 0.0000
LGLE4214 Blue Gelcoat(LGLE4109) No emissions Cobalt Necdecanoate 0.04% 0.0000
LGLE4214 Blue Gelcoat(LGLE4109) Gelcoat Application-MMA Methyl Methacrylate 2.80% 0.0225
LGLE4214 Blue Gelcoat(LGLE4109) Gelcoat Application Styrene 28.96% 0.1289
LGLE4230 Blue Gelcoat(LGLE4230) No emissions Cobalt 2-Ethylhexanoate 0.09% 0.0000
LGLE4230 Blue Gelcoat(LGLE4230) No emissions Cobalt Neodecanoate 0.02% 0.0000
LGLE4230 Blue Gelcoat(LGLE4230) Gelcoat Application-MMA Methyl Methacrylate 2.97% 0.0225
LGLE4230 Blue Gelcoat(LGLE4230) Gelcoat Application Styrene 25.09% 0.1117
LGNCP6054 Blue Gelcoat(LGNCP6054) No emissions Cobalt 2-Ethylhexanoate 0.13% 0.0000
LGNCP6054 Blue Gelcoat(LGNCP6054) No emissions Cobalt Hydroxide 0.01% 0.0000
LGNCP6054 Blue Gelcoat(LGNCP6054) No emissions Cobalt Neodecanoate 0.04% 0.0000
LGNCP6054 Blue Galloped(LGNCP6054) Gelooat Application Styrene 30.70% 0.1366
Page 4 of 6
l

Iconic Marine Group Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical N (%)
LHB2508 Interior White Gelcoat(LHB2508) Gelcoat Application Styrene 19.00% 0.0846
MA2090 ITW Plexus Adhesive(MA2090) MSDS Methyl Methacrylate 54.50% 0.0505
MA560 ITN Plexus Adhesive(MA560) MSDS Methyl Methacrylate 60.00% 0,0504
NGNCP7050 Driftwood Gelcoat(NGNCP7050) No emissions Cobalt 2-EMylhesanoate 0.13% 0.0000
NGNCP7050 Driftwood Gelcoat(NGNCP7050) No emissions Cobalt Hydroxide a01% 0,0000
NGNCP7050 Driftwood Gelcoat(NGNCP7050) No emissions Cobalt Neodecanoate 0.04% 0.0000
NGNCP7050 Driftwood Gelcoat(NGNCP7050) Gelcoat Application Styrene 30.65% 0.1364
R015APF55 Infusion Resin(R015APF55) Closed Molding Styrene 37.00% 0.0111
R049GPF33 VE Resin(R049GPF33) No emissions Cobalt 2-Ethylhexanoate 0.30% 0.0000
R049GPF33 VE Resin(R049GPF33) Gelcoat Application-MMA Methyl Methacrylate 2.00% 0.0150
R049GPF33 VE Resin(R049GPF33) Mechanical Non-Atomized Styrene 39.60% 0.0465
REV2879 Prcline White Gelcoat(REV2879) Gelcoat Application-MMA Methyl Methacrylate 3.00% 0.0225
REV2879 Proline White Gelcoat(REV2879) Gelcoat Application Styrene 26.00% 0.1157
RHD7026 Yellow Gelcoat(RHD7026) Gelcoat Application-MMA Methyl Methacrylate 3.00% 0.0225
RHD7026 Yellow Gelcoat(RHD7026) Gelcoat Application Styrene 24.00% 0.1068
RHD9024 Frost Gray Gelcoat(RHD9024) Gelcoat Application-MMA Methyl Methacrylate 3.00% 0,0225
RHD9024 Frost Gray Gelcoat(RHD9024) Gelcoat Application Styrene 30.00% 0.1335
RVP2879 White Gelcoat(RVP2879) Gelcoat Application-MMA Methyl Methacrylate 6.00% 0.0,450
RVP2879 White Gelcoat(RVP2879) Gelcoat Application Styrene 28.00% 0.1246
SXAS40 Paint Solvent(SXA840) N/A—assume all emitted 1,2,4-Trimethylbenzene 0.10% 0.0010
SXAS40 Paint Solvent(SXA840) N/A—assume all emitted Toluene 0.20% 0.0020
VPR0012 Barrier Coat(VPR0012) No emissions Cobalt 2-Ethylhexanoate 0.09% 0.0000
VPR0012 Barrier Coat(VPRO012) No emissions Cobalt Neodecanoate 0.02% 0.0000
Page S ol6

Iconic Marine Group Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical (%) (%)
VPR0012 Barrier Coat(VPR0012) Gelcoat Application Styrene 31.84% 0.1417
WGLE4474 TW White Gelcoat(WG33LE4474) No emissions Cobalt 2-Ethylhexanoate 0.09% 0.0000
WGLE4474 TW White Gelcoat(WG33LE4474) No emissions Cobalt Neodecanoate 0.02% 0.0000
WGLE4474 TW White Gelcoat(WG33LE4474) Gelcoat Application-MMA Methyl Metbacrylate 2.99% 0.0225
WGLE4474 TW White Gelcoat(WG33LE4474) Gelcoat Application Styrene 25.27% 0.1125
WS0010 Wax Solution(WS0010) Manual Styrene 90.00% 0.2045
Page 6 of

Iconic Marine Group Washington Plant:Usage and VOC 8:HAP Emissions Year Ending: December 2017
3MFillet Usage(gal): 195.0 VOC Content(wt%): 0.289 VOCs(lbs): 64.4
3MFillet Usage(Ibs): 2,081.7 HAP Content(wt%): 0.289 HAPs(Ibs): "A
Density(lb/gal): 10.68
CAS No Chemical Weight% E-Factor HAPITAP Lbs
100-42-5 Styrene 28.90% 0 031 64.371
6441-800 Usage(gal): 50.3 VOC Content(wt%): 0.3461 1 VOCs(Ibs): 17.4
Resin(6441.800) Usage(Ibs): 452.0 HAP Content(wt%): 0.345 HAPs(lbs), 17.4
Density(lb/gal): 8.99
CAS No Chemical Weight% E-Factor HAPITAP Lbs
100-42-5 Styrene 34.49% 0.039 17.402
707061 Usage(gal): 132.0 VOC Content(wt%): 0.301 VOCs(lbs): 469.9
EZ Sanding Grey Primer(707- Usage(Ibs): 1,563.2 HAP Content(wt%): 0.166 HAPs(Ibsh 259.5
061) Density(lb/gal): 11.84
CAS No Chemical Weight% E-Factor HAPITAP Lbs
100-42-5 Styrene 16.60% 0.166 259.499
945GA104 Usage(gal): 14.9 VOC Content(wt%): 0.465 VOCs(lbs): 38.9
Green Tooling Gelcoat Usage(Ibs): 135.0 HAP Content(wt%): 0.464 HAPs(Ibs): 38.9
(945GA104) Density(lb/gal): 9.06
CAS No Chemical Weight% E-Factor HAPITAP Lbs
80-62-6 Methyl Methacrylate 4.15% 0.038 5.063
100-42-5 Styrene 42.30% 0.251 33.818
945YA058 Usage(gal): 14.8 VOC Content(wt°%): 0.462 VOCs(Ibs): 37.1
Polycor OF Orange Tooling Usage(Ibs): 135.0 HAP Content(wt%): 0.460 HAPs(Ibs): 36.7
Gelcoat(945YA058) Density(Ib/gal): 9.12
CAS No Chemical Weight% E-Factor HAPITAP Lbs
100-41-4 Ethylbenzene 0.17% 0.002 0.230
80-62-6 Methyl Methacrylate 4.00% 0.030 4.050
100-42-5 Styrene 41.80% 0.241 32.468
AME1001T30 Usage(gal): 3,128.9 VOC Content(wt%): 0.342 VOCs(Ibs): 969.2
Resin(AME1001T30) Usage(Ibs): 28,130.0 HAP Content(wt%): 0.340 HAPs(Ibs): 969.2
Density(lb/gal): 8.99
CAS No Chemical Weight% E-Factor HAPITAP Lbs
100-42-5 Styrene 34.01% 0.034 969.191
AME1001T35 Usage(gal): 2,795.2 VOC Content(wt%): 0.341 VOCs(Ibs): 865.8
Resin(AME1001T35) Usage(Ibs): 25,130.0 HAP Content(wt%): 0.339 HAPs(lbs): 865.8
Density(lb/gal): 8.99
CAS No Chemical Weight% E-Factor HAPITAP Lbs
100.42-5 Styrene 33.90% 0.034 865.829
©Value Environmental 6/12/2018 Page 1 of 8

Iconic Marine Group Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2017
AME100IT40 Usage(gal): 11,206.6 VOC Content(wt%): 0.341 VOCs(Ibs): 3,727.9
Resin(AME1001 T40) Usage(lbs): 100,752.9 HAP Content(wt%): 0.339 HAPs(lbs): 3,727.9
Density(lb/gal): 8.99
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
100.42-5 Styrene 33.88% 0.037 3,727.857
AME6001160 Usage(gal): 431.E VOC Content(wt%): 0.3921 1 VOCs(lbs): 180.4
Infusion Resin(AME6001160) Usage(lbs): 3,880.0 HAP Content(wt%: 0.391 HAPs(lbs): 180.4
Density(lb/gal): 8.99
CAS No Chemical Weight% E-Factor HAPITAP Lbs
100-42-5 Styrene 39.08% 0.047 180.420
AME600IT45 Usage(gal): 53.9 VOC Content(wt%): 0.342 VOCs(lbs): 17.8
Resin(AME6001T45) Usage(lbs): 485.0 HAP Content(wt%): 0.340 HAPs(lbs): 17.9
Density(lb/gal): 8.99
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
100-42-5 Styrene 34.03% 0.037 17.945
Arjayl201 Usage(gal): 50.0 VOC Content(wt%): 0.350 VOCs(lbs): 12.9
Arjay Fillet Putty(1201) Usage(lbs): 275.2 HAP Content(wt°/a): 0.350 HAPs(lbs): 12A
Density(lb/gal): 5.50
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
100.42-5 Styrene 35.00% 0.047 12.935
Arjay4501 Usage(gal): 130.0 VOC Content(wt%): 0.370 VOCs(lbs): 27.4
Arjay Fillet Putty(4501) Usage(lbs): 661.4 HAP Content(wt%): 0.370 HAPs(lbs): 27.4
Density(lb/gal): 5.09
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
100.42-5 Styrene 37.00% 0.042 27.447
Arjay7121 Usage(gal): 95.0 VOC Content(wt%): 0.310 VOCS( s 311.0
Aday Fillet Putty(7121) Usage(lbs): 934.9 HAP Content(wt%): 0.310 HAPs(lbs): 31.0
Density(Ib/gal): 9.84
CAS No Chemical Weight% E-Factor HAPITAP Lbs
100-42-5 Styrene 31.00% 0.033 31.011
AxCX500 Usage(gal): 4.0 VOC Content(wt%): 1.000 VOCs(lbs): 28.0
XTEND(CX-500) Usage(lbs): 28.0 HAP Content(wt%): 0.600 HAPs(lbs): 16.8
Density(lb/gal): 7.01
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
108-88-3 Toluene 30.00% 0.300 8.407
1330-20-7 Xylene(mixed isomers 30.00% 0.300 8.407
©Value Environmental 6/12/2018 Page 2 of 8

Iconic Marine Group Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2017
B70 Usage(gal): 310.0 VOC Content(wt%): 0.324 VOCs(lbs): 82.9
Corebond Adhesive(B70) Usage(Ibs): 1,939.1 HAP Content(wt%): 0.324 HAPs(lbs): 82.9
Density(lb/gal): 6.26
CAS No Chemical Weight% E-Factor HAPITAP Lbs
121-69-7 Dimethylaniline 0.22% 0.002 4.231
100-42-5 Styrene 32.21% 0.041 78.703
B71 Usage(gal): 3,795.0 VOC Content(wt%): 0.349 VOCs(lbs): 1,457.8
Corebond Adhesive(B71) Usage(Ibs): 31,017.3 HAP Content(wt%): 0.349 HAPs(lbs): 1.457-9
Density(Ib/gal): 8.17
CAS No Chemical Weight% E-Factor HAPITAP Lbs
100-42-5 Styrene 34.90% 0.047 1,457.813
BGMRR8015 Usage(gal): 100.1 VOC Content(wt%): 0.451 VOCs(Ibs): 240.8
Black Gelcoat(BGMRR8015) Usage(Ibs): 900.0 HAP Content(wt%): 0.450 HAPs(Ibs): 240.8
Density(lb/gal): 8.99
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 4.60% 0.038 33.750
100-42-5 Styrene 40.37% 0.230 207.000
BPOPaste Usage(gal): 4.1 VOC Content(wt%): 0.200 VOCs(lbs): 8.1
Green BPO Paste H50 Usage(lbs): 40.6 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 10.01
CAS No Chemical Weight% E-Factor HAPITAP Lbs
No reportable HAPs 0.00% 0.000 0.000
CadoxD50 Usage(gal): 260.8 VOC Content(wt%): 0.020 VOCs(lbs): 43.5
Catalyst(Cadox D50) Usage(Ibs): 2,175.0 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Density(lb/gal): 8.34
CAS No Chemical Weight% E-Factor HAPITAP Lbs
No reportable HAPs 0.00% 0.000 0.000
CHL 15 Usage(gal): 16.0 VOC Content(wt%): 1.000 VOCs(Ibs): 116.1
Chemlease 15 Usage(lbs): 116.1 HAP Content(wt%): 0.0001 1 HAPs(lbs): 0.0
Density(lb/gal): 7.26
CAS No Chemical Weight% E-Factor HAPITAP Lbs
No reportable HAPs 0.00% 0.000 0.000
CHI.2697 1 Usage(gal): 44.0 VOC Content(wt%): 0.996 VOCs(lbs): 270.6
Chemlease Sealer 2697 1 Usage(Ibs): 271.6 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 6.17
CAS No Chemical Weight% E-Factor HAPITAP Lbs
No reportable HAPs 0.00% 0.000 0.000
©Value Environmental 6/12/2018 Page 3 of 8
1

Iconic Marine Group Washington Plant:Usage and VOC 8.HAP Emissions Year Ending: December 2017
CHL MC Usage(gal): 36.0 VOC Content(wt°/.): 1.000 VOCs(lbs): 225.2
Chemlease Mold Cleaner Usage(lbs): 226.2 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 6.26
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.000
DC2000 Usage(gal): 5.5 VOC Content(wt%): 0.352 VOCs(lbs): 15.2
Clear(DC2000) Usage(lbs): 43.2 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 7.85
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.000
DCU2021 Usage(gal): 8.0 VOC Content(wt%): 0.508 VOCs(lbs): 32.2
Clear(DCU2021) Usage(lbs): 63.5 HAP Content(wt%): 0.360 HAPs(lbs): 22.9
Density(Ib/gal): 7.94
CAS No Chemical Weight% E-Factor HAPITAP Lbs
100414 Ethylbenzene 5.30% 0.053 3.367
80-62-6 Methyl Methacrylate 0.20% 0.002 0.127
100.42-5 Styrene 0.40% 0.004 0.254
1330-20-7 Xylene(mixed isomers 30.10% 0.301 19.120
DCX61 Usage(gal): 2.3 VOC Content(wt%): 0.161 VOCs(Ibs): 3.2
Hardener(DCX61) Usage(lbs): 20.2 HAP Content(wt%): 0.000 HAPs(lbs): O.0
Density(lb/gal): 8.97
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.000
DDM-9 Usage(gal): 179.6 VOC Content(wt%): 0.025 VOCs(lbs): 37.0
Luperox DDM-9 Catalyst Usage(Ins): 1,504.0 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 8.37
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0 000 0.000
DT870 Usage(gal): 4.0 VOC Content(wt%): 1.000 VOCs(lbs): 27.6
Reducer(DT870) Usage(lbs): 27.6 HAP Content(wt%): 0.190 HAPs(lbs): 5.3
Density(lb/gal): 6.91
CAS No Chemical Weight% E-Factor HAPITAP Lbs
108-88-3 Toluene 19.00% 0.190 5.252
DT885 Usage(gal): 16.0 VOC Content(wt%): 1.0001 1 VOCs(lbs): 112.6
Reducer(DT885) Usage(lbs): 112.6 AP Content(wt%): 0.166 HAPs(ibs): 18.7
Density(Ib/gal): 7.04
CAS No Chemical Weight% E-Factor HAPITAP Lbs
100-41-4 Ethylbenzene 0.90% 0.009 1.014
108-88-3 Toluene 10.50% 0.105 11.827
1330-20-7 Xylene(mixed isomers 5.20% 0.052 5.857
0 Value Environmental 6/12/2018 Page 4 of 8

Iconic Marine Group Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2017
Flex-Z Usage(gal): 152.0 VOC Content(wt%): 0.900 VOCs(lbs): 798.6
Flex-Z 1,2,3,4,5&6 Usage(Ibs): 887.4 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Density(lb/gal): 5.84
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.000
GGLE4186 Usage(gal): 66.5 VOC Content(wt%): 0.284 VOCs(lbs): 80.6
Aqua Mist Gelcoat(GGLE4186) Usage(Ibs): 598.0 HAP Content(wt%): 0.282 HAPs(lbs): 80.6
Density(lb/gal): 8.99
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 2.99% 0.023 13.455
100-42-5 Styrene 25.25% 0.112 67.193
H834RAA30 Usage(gal): 109.0 VOC Content(wt%): 0.3411 1 VOCs(lbs): 38.5
Polyester Resin(H834RAA30) Usage(Ibs): 1,000.0 HAP Content(wt%): 0.3411 1 HAPs(lbs): 38.5
Density(lb/gal): 9.17
CAS No Chemical Weight% E-Factor HAPITAP Lbs
100-425 Styrene 34.10% 0.039 38,500
H834RAA35 Usage(gal): 317.2 VOC Content(wt°/.): 0.341 VOCs(Ibs): 112.0
Polyester Resin(H834RAA35) Usage(lbs): 2,910.0 HAP Content(wt°/.): 0.341 HAPs(Ibs): 112.0
Density(lb/gal): 9.17
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
100-42-5 Styrene 34.10% 0 039 112.035
H834RAA40 Usage(gal): 9,602.1 VOC Content(wt%): 0.341 VOCs(Ibs): 3,391.5
Polyester Resin(H834RAA40) Usage(Ibs): 88,090.0 HAP Content(wt%): 0.341 HAPs(lbs): 3.391.5
Density(Ib/gal): 9.17
CAS No Chemical Weight% E-Factor HAPITAP Lbs
100-42-5 Styrene 34.10% 0.039 3,391.465
HiPt 90 Usage(gal): 243.4 VOC Content(wt%): 0.3701 1 VOCs(Ibs): 22.1
Hi Point 90 Usage(lbs): 2.176.2 HAP Content(wt%): 0.360 HAPs(Ibs): 0.3
Density(lb/gal): 8.94
CAS No Chemical Weight% E-Factor HAPITAP Lbs
131-11-3 Dimethyl Phthalate 36.00% 0.000 0.313
Honeywax Usage(gal): 56.3 VOC Content(wt%): 0.698 VOCs(lbs): 261.4
Honey Wax(P52314R) Usage(Ibs): 374.5 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 6.65
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.000
©Value Environmental 6/12/2018 Page 5 of 8

Iconic Marine Group Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2017
10517 Usage(gal): 30.0 VOC Content(wt%): 0.610 VOCs(lbs): 57.9
Patch Booster(10517) Usage(lbs): 252.7 HAP Content(wt%): 0.590 HAPs(lbs): 52.8
Density(Ib/gal): 8.42
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 17.00% 0.128 32.220
100-42-5 Styrene 40.00% 0.062 15.541
1330-20-7 Xylene(mixed isomers 2.00% 0.020 5.054
LGLE4214 Usage(gal): 158.1 VOC Content(wt%): 0.319 VOCs(lbs): 215.1
Blue Gelcoat(LGLE4109) Usage(lbs): 1,421.0 HAP Content(wt%): 0.318 HAPs(lbs): 215.1
Density(lb/gal): 8.99
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80.62-6 Methyl Methacrylate 2.80% 0.023 31.973
100-42-5 Styrene 28.96% 0.129 183.127
LGLE4230 Usage(gal): 281.6 VOC Content(wt%►: 0.282 VOCs(lbs): 407.7
Blue Gelcoat(LGLE4230) Usage(lbs): 3,039.0 HAP Content(wt°/,): 0.281 HA Pa(lbs): 407.7
Density(lb/gal): 10.79
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80.62-6 Methyl Methacrylate 2.97% 0.023 68.378
100-42-5 Styrene 25.09% 0.112 339.306
LGNCP6054 Usage(gal): 240.51 VOC Content(wt%): 0.309 VOCs(lbs): 318.3
Blue Gelcoat(LGNCP6054) IUsage(lbs): 2,330.21 HAP Content(wt%): 0.307 HAPs(lbs): 318.3
Density(lb/gal): 9.69
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
100-42-5 Styrene 30.70% 0.137 318.346
LHB2508 Usage(gal): 430.5 VOC Content(wt%): 0.190 VOCa(lbs): 452.3
Interior White Gelcoat(LHB2508) Usage(lbs): 5,350.0 HAP Content(wt%): 0.190 HAPs(lbs): 452.3
Density(11 /gal): 12.43
CAS No Chemical Weight% E-Factor HAPITAP Lbs
100-42-5 Styrene 19.00% 0.085 452.343
MA2090 Usage(gal): 1,910.0 VOC Content(wt°ib): 0.545 VOCs(lbs): 797.0
ITW Plexus Adhesive(MA2090) Usage(lbs): 15,770.1 HAP Content(wt%): 0.545 HAPs(lbs): 797-0
Density(lb/gal): 8.26
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 54.50% 0.051 796.986
MA560 Usage(gal): 1,262.1 VOC Content(wt%): 0.624 VOCs(lbs): 772.8
ITW Plexus Adhesive(MA560) Usage(lbs): 10,420.7 HAP Content(wt%): 0.600 HAPs(lbs): 525.4
Density(Ib/gal): 8.26
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 60.00% 0.050 525.416
©Value Environmental 6/12/2018 Page 6 of 8

Iconic Marine Group Washington Plant:Usage and VOC$HAP Emissions Year Ending: December 2017
NGNCP7050 Usage(gal): 1,146.0 VOC Content(wt%): 0.308 VOCs(lbs): 1,530.5
Driftwood Gelcoat(NGNCP7050) Usage(Ibs): 11,221.1 HAP Content(wt%): 0.307 HAPs(lbs): 1,530.5
Density(Ib/gal): 9.79
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
100-42-5 Styrene 30.65% 0.136 1,530.468
R015APF55 Usage(gal): 1,215.9 VOC Content(wt%): 0.370 VOCs(lbs): 123.8
Infusion Resin(R015APF55) Usage(lbs): 11,155.0 HAP Content(wt%): 0.370 HAPs(lbs): 123.8
Density(lb/gal): 9.17
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
100-42-5 Styrene 37.D0% 0.011 123.821
R049GPF33 Usage(gal): 528.7 VOC Content(wt%): 0.421 VOCs(Ibs): 312.8
VE Resin(R049GPF33) Usage(Ibs): 4,850.0 HAP Content(wt%): 0.4151 1 HAPs(Ibs): 298.3
Density(lb/gal►: 9.17
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 2.00% 0.015 72.750
100-42-5 Styrene 39.50% 0.047 225.525
REV2879 Usage(gal): 2,151.8 VOC Content(wt%): 0.290 VOCs(lbs): 3,422.5
Praline White Gelcoat Usage(Ibs): 24,765.0 HAP Content(wt%): 0.290 HAPs(lbs): 3.422.5
(REV2879) Density(lb/gal): 11.51
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80.62-6 Methyl Methacrylate 3.00% 0.023 557.213
100-425 Styrene 26.00% 0.116 2,865.311
RHD7026 Usage(gal): 1,002.7 VOC Content(wt%): 0.270 VOCa(Ibs): 1,459.7
Yellow Gelcoat(RHD7026) Usage(Ibs): 11,289.1 HAP Content(wt%): 0.270 HAPs(Ibs): 1,459.7
Density(lb/gal): 11.26
CAS No Chemical Weight% E-Factor HAPITAP Lbs
80-62-6 Methyl Methacrylate 3.00% 0.023 254.005
100-42-5 Styrene 24.00% 0.107 1,205.679
RHD9024 Usage(gal): 51.5 VOC Content(wt%): 0.330 VOCs(Ibs): 76.3
Frost Gray Gelcoat(RHD9024) Usage(Ibs): 489.2 HAP Content(wt%): 0.330 HAPs(Ibs): 76.3
Density(lb/gal): 9.51
CAS No Chemical Weight% E-Factor HAPITAP Lbs
80-62-6 Methyl Methacrylate 3.00% 0.023 11.007
100-32-5 Styrene 30.00% 0.134 65.310
RVP2879 Usage(gal): 107.4 VOC Content(wt%): 0.340 VOCs(Ibs): 193.0
White Gelcoat(RVP2879) Usage(Ibs): 1,138.0 HAP Content(wt%): 0.340 HAPs(Ibs): 193.0
Density(Ib/gal): 10.59
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 6.00% 0.045 51.210
100-42-5 Styrene 28.00% 0.125 141.795
©Value Environmental 6/12/2018 Page 7 of 8

Iconic Marine Group Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2017
SXA840 Usage(gal): 0.1 VOC Content(wt%): 0.456 VOCs(lbs): 0.4
Paint Solvent(SXA840) Usage(lbs): 0.9 HAP Content(wt%): 0.002 HAPs(lbs): 0.0
Density(lb/gal): 7.00
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
108-88-3 Toluene 0.20% 0.002 0.002
VPR0012 Usage(gal): 1,275.9 VOC Content(wt%): 0.320 VOCs(lbs): 1,715.8
Barrier Coat(VPRO012) Usage(lbs): 12,109.1 HAP Content(wt%): 0.318 HAPs(lbs): 1,715.8
Density(lb/gal): 9.49
CAS No Chemical Weight% E-Factor HAPITAP Lbs
100.42-5 Styrene 31.84% 0.142 1,715.765
WGLE4474 Usage(gal): 724.4 VOC Content(wt%): 0.284 VOCs(lbs): 1,055.0
TW White Gelcoat Usage(lbs): 7,817.6 HAP Content(wt%): 0.283 HAPs(lbs): 1,055.0
(WG33LE4474) Density(Ib/gal): 10.79
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80.62-6 Methyl Methacrylale 2.99% 0.023 175.896
100-42-5 Styrene 25.27% 0.112 879.099
WS0010 Usage(gal): 7.8 VOC Content(wt%): 0.900 VOCs(lbs): 14.3
Wax Solution(WS0010) Usage(Ibs): 70.0 HAP Content(wt%): 0.900 HAPs(Ibs): 14.3
Density(lb/gal): 8.99
CAS No Chemical Weight% E-Factor HAPITAP Lbs
100-42-5 Styrene 90.00% 0.205 14.315
Month(Ibs) Month(tons)
VOCs: 26,791 13.40
HAPs: 24,375 12.19
©Value Environmental 611212018 Page 8 of 8

2017 Emissions Inventory Review / Data Tracking Form
Facility Name: Iconic Marine Group, LLC Facility ID: 0700151
Facility Assigned to: Data Entry: Beaufort County
Classification: Yongcheng Chen YC Confidential Copy Submitted?
Title V YES
Initial Review/Data Entry
Enter date received into ED. Date Received:
gn appropriate Assigned: _f/� S Date Due:
PJ� Assigned to a ro riate individual. Date Assi ed: 9
2/Paper copy submitted: One copy received with supporting documentation,certification form signed by responsible official,and
rppears generally complete;
0/Electronic copy submitted: All supporting documentation and certification form(with time/date stamp)signed by responsible
official has been received. I L
Comments:
Inventory Review
Er All forms and supporting documentation appear to be complete if paper submission(check ED OS data if electronic).
93"'Contact,address,phone number changes entered into I-Beam/Facilities if necessary.
Er All known operating scenarios,control devices,and emission release points have been entered for each emission source(permitted,
insignificant,and unpermitted)or note that the emission source was not operated or not required to report.
Check if SCC codes for each OS are accurate and update if needed.
Evaluate"U"sources for significance and address according to policy.
Calculations/forms appear to add up correctly.
All compliance issues are being addressed(e.g.Toxics limits,above TV thresholds,large emissions increase/decrease, installation
without a permit).
All volatile HAPs/TAPs were included in the VOC total.
'Er Calculations and control efficiencies appear correct. Emission factors are the best available and most current factors appropriate
for the reporting facility(e.g.stack testing,AP-42,etc.).
Review facility comments and address any issues.
Er Update ED(Data Entry Main)if additional information is required(corrections due date and date received).
U Check all ED QA/QC reports.
❑^ Comparison with previous emission inventory must be made and outliers(> 10%)must be investigated and explained.
� t inventory review comments and summarize any changes in ED-Data Entry Main"DAQ internal comments".
o Print and attach the facility total report.
Date Info Requested: Date Info Received: — Total Days on Hold:
Date Review Complete: Z 7 ?.J Signature: 40 dLtr--
Date Submitted to EI Coordinator: 11 z-7/ 20 0
Date Approved: Initials: '

FacilityTotal CY 2017 Emission Summary Recorded in ED Facility H)#: 0700151
ry �
Facility Name: Iconic Marine Group.LLC Permit 9(s): 10534R00
Green House Gases Pollutants(GHG) Actual Emissions
Tons/Yr
Pollutant CAS
Uemini- Change
Inns
Not Not h;A
Reported Reported
CO2 equivalent(sum of individual GHG pollutant emission No GHGs
times their 1995 IPCC Global Warming Potential(GWP), Reported
converted to metric tons)
Criteria Pollutants Actual Emissions
(Tons/Year)
Pollutant CAS CY 2017 CY 2015 Demini-
from ED from Fees mus Change
PM(TSP) TSP 0.450000 Not 0.5 A
Reported
PM10 PM10 0.220000 Not 0.5
Reported
PM2.5 PM2.5 0.110000 Not 0.5 A
Reported
VOC V()c 13.40 0.000000 0.5 N/A
Hazardous Air Pollutants Actual Emissions
(BAPS) (Poonds/Vear)
pon.t.lpd/or Toxic Air Pollutants (AS CY 2017 CY 2015 Demini- `N)
(TAPS) from ED from Fees mus Change
Diethyl aniline,N,N- 121-69-7 4.20 Not 100.0 N/A
Reported
Dimethyl phthalate 131-11-3 0.300000 Not 10.0 N/A
Reported
Ethyl benzene 100-41-4 4.60 Not 100.0 EN/A
Reported
MEK(methyl ethyl ketone,2-butanone) 78-93-3 315.60 Not 1000
Reported
Methyl methacrylate 80-62-6 2,633.50 Not 1,000.0 N/A
Reported
Styrene 10042-5 21,668.90 0.000000 100.0 N/A
Toluene 108-88-3 25.50 Not 100.0 N/A
Reported
08/07/2018 Pnre 1 of

Facility Total CY 2017 Emission Summary Recorded in ED Facility II)#: 0700151
Facility Name: Iconic Marine Group,LLC Permit#(s): 10534R00
Hazardous Air Pollutants Actual Emissions
(HAPs) (Pounds/Year)
1 ollutap CAS
d/or Toxic Air Pollutants _ CY 2017 CY 2015 Demini- %
(TAPS) from ED from Fees mus Change
Xylene(mixed isomers) 1310-20_7 38.40 Not 100.0 N/A
Reported
Largest Individual HAP Styrene 21,668.90 Ibs
Total HAP Emissions 24.375.40lbs
Largest Individual CAP VOC 13.41)tons
Total CAP Emissions 13.62 tons
Total TAP Emissions 22,048.40 lbs
Total Aggregate 13.62 tons
Emissions
DAO's Comments Reeardine Inventory
08/07/2018 Page 2 of 2

Original COPY of RECORD Date Submitted: 6/16/2018 09:38:49
Inventory Certification Form(Title V)
Facility Name: Iconic Marine Group, LLC Facility ID :0700151
1653 Whichards Beach Road Permit: 10534
Washington,NC 27889 County: Beaufort
DAQ Region : WARO
North Carolina Department of Environment and Natural Resources
Division of Air Quality
Air Pollutant Point Source Emissions Inventory—Calendar Year 2017
These forms must be completed and returned even if the facility did not operate or emissions were zero
The legally defined "Responsible Official" of record for your facility is Mike Fiver
This person or one that meets the definition below must sign this certification form.
The official submitting the information must certify that he/she complies with the requirements as specified in Title 15A
NCAC 2Q.0520(b)which references and follows the federal definition. 40 CFR Part 70.2 defines a responsible as meaning one
of the following:
1. For a corporation: a president, secretary,treasurer,or vice—president of the corporation in charge of a principal
business function,or any other person who performs similar policy or decision making functions for the overall
operation of one or more manufacturing, production, or operating facilities applying for a or subject to a permit and
either
i.the facilities employ more than 250 persons or have gross annual sales or expenditures exceeding$25
miilion(in second quarter 1980 dollars);or
ii. the delegation of authority to such representatives is approved in advance by the permitting authority;
2. For partnership or sole propietorship; a general partner or the proprietor, respectively;
3. for a muncipality, state,federal,or other public agency includes the chief executive officer having responsibility for the
overall operations of a principal geographic unit of the agency(e.g., a Regional Administrator of EPA).
��FRTIFTCATIQN STATEMENT
'ImWrtant7 Legally Reaponsible Official, read and sig13 after all submisai-Q��
certify that I am the responsible official for this facility, as described above, and hereby certify that the information contained
n this air emissions report, including attached calculations and documentation, is true,accurate and complete. (Subject to legal
enalities of up to $25,000 per occurrence and possible imprisonment as outlined in G.S.§143-215.3(a)(2))
Responsible Official's Signature Below use blue ink): Date Signed:
Printed Name: Mike F
6�Z�/ZoiB
Signature.
This form applies to Title I ilities. If this facility is not classified as Title V,please telephone your regional office Emission
Inventory contact at once for proper forms.
'D r
com `
Email address of Responsible Official: [e-mail]
n 2 7 2 �$
Information on this Form cannot be held confiden al =—
Original COPY of RECORD Date Submitted: 6/16/2018 09:38:49 1

Iconic Marine Group
2017 Emission Inventory Calculations
VOC,HAP and PM Emission Calculations
This document describes actual Volatile Organic Compound(VOC),Particulate Matter(PM)and
Hazardous Air Pollutant(HAP)emissions from the facility. In accordance with AP-42 section
Section 4.4(updated 5/08),emission calculations use ANSI/ACMA/ICPA UEF-1-2011a
Estimating Emission Factors from Open Molding Composite Processes which utilize the Unified
Emission Factors(UEF)for open molding of composites dated October 5,2011. An attached
table lists the basis for each emission factor(E-factor)utilized in the emissions calculations. A
copy of the October 5,2011 UEF table is also included with this letter.
The gelcoat spray guns are atomized. The styrene emission factor used for gelcoats is from the
gelcoat application row of the UEF table. The Methyl Methacrylate(MMA)emission factor used
for gelcoats is based on the MMA gelcoat application row of the UEF table. The resin guns are
non-atomized. The emission factor for lamination resins is taken from the mechanical non-
atomized row of the UEF table.
Small quantities of highly reactive liquid organic perioxide solutions(e.g.,Hi Point 90)are used
by the reinforced plastics industry to initiate the polymerization reaction in the resin or gelcoat
material. Emission estimates in this permit application are based on the composite Manufacturer
Associations' study,"Emission Factors for Liquid Organic Peroxide Catalysts used in the Open
Molding of Composites." The emission factor for Dimethyl Phthalate(DMP)or other utilized
organic is 0.04%of the available DMP by weight or 0.0144(0.04 x 36%).
Usage of and thus emissions from other raw materials(e.g.,mold cleaners and sealers,etc.)at the
Washington plant are smaller in nature. Emissions from these other material usages and/or
chemicals utilize a similar methodology or conservatively assume all of the chemical is emitted
(e.g.,solvents in paints used).
Particulate emissions from painting are calculated assuming a 1%total weight loss with 50
percent of those emissions PMio and 25 percent of those emissions PM2.5 as a conservative
estimate with no controls.
Particulate emissions from paint usage:
600 lbs paint bought plant-wide
assume 1%loss as particulate emissions,50%of that is PMio and 25%is PM2.5
1,800 lbs x 0.01 = 18.0 pounds PM/year=0.009 tons PM/year
18.0 lbs PM x 0.5=9.0 pounds PMio/year=0.0045 tons PMio/year
18.0 lbs PM x 0.25=4.5 pounds PM2.5/year—0.0023 tons PM2.5/year
Particulate emissions from hull and deck grinding:
351,000 lbs resin and gelcoat bought plant-wide
assume 1%loss with 25%of that emitted as particulate emissions,50%of that is PMjo and 25%
is PM2.5.

Iconic Marine Group
2017 Emission Inventory Calculations
351,000 lbs x 0.01 x 0.25=878 pounds PM/year=0.44 tons PM/year
878 lbs PM x 0.5=439 pounds Midyear=0.22 tons Midyear
878 lbs PM x 0.25=219 pounds PM2.5/year=0.11 tons PM2.5/year

A
b EF Table 1: Unified Emission Factors for Open Molding of Composites
N Revised and Approved 101;13!2t109
e
Er3Rsslon Rate in Pounds of Styrene Emitted per Ton of Resin or(ielco 1 Processed
Styrerx wntant M rcsxvpstrcar.h a33 lay 33 3a lb 36 37 16 19 40 i Ji a 47 1 N 45
46 47 a49 50 ,yp
Man" 0.126a%styrmes7000 c2 c0 Od "- "- n2 "-1 t2.'+ li4 1a0 140 152 103 tE-0 '7a 1^l n0.226. 11.0037Y Z.iI
Man"rf Vapor Suppressed Resin VSR" Mrinai aorlssfdn faotot IebC Moor! a ;I 1i.4+apwe!Ie VSR rWmear taemr b exh rnava�pFreasx+ am; - _
111aehunkal Alwn¢ed 0 199.%sIr.a 2600 111 1 1:b I lA0 1'54 108 fail 197 211 Y17 1 246 2154 1 200 I 293 1 267 1 211 1 320 1 NG I 3!4 F NO 714 r%sryrerr) 0 it)s MD0
~Ianeai Alowlsed rim VSft" Medlatiuf Atawaed mission fatter r+sxa about, + I l -4 45+spuds VSR rM.pY tatty-w tach m,,i w*ssan.armula:cn 1 ._.
MCW n"Atarnad Cmbolied Syray'4 0.130 s%styrene a 2000 EC V' I 103 1 '19 1 1301 141 1 152 1 l et 1 174 1 169 1 100 207 210 1 229 1 240 I 2e 1 j 202 I^'0 0.77 s((0.714 x%styrene) 0.10}x 2000
14tft.kal CormoNed Spray rkh VSR Mochrtkat Atomusd CmN011ad Spay arsls{mn faelm::mod adores_ . +1 iC4!+spftc VSFreductmfslmbraar]'nsnsa WpK ,Sams),;
Maeharacof Nm Atmnysad 0 107 r%sty a 2000 1 71 1 74 1 7' 1 SO 1 83 1 9e 1 e? 1 03 1 to V,I 1 C2 1 135 1 i oe I •11 1 115 1 is 124 1 (to 157 x%Vyamlo).001951 x 290t
Meelta M fbmrVmn¢d oith VSR{ Mnchanisaf Nm-AOtmlaed emaswn factor'hate:axee1 s it-1045.sos_Me VSR rtuunon foIIW boa.n rKaudrapndban for.luatull
fd.hanW NW-Aeomdd applma:. of res+ns ma
COntYn*.thy,stymnt...or`^ MechameW Nm Atomized Stytatle morn~oWision Faster 01std mod.)x.55
Morhankal N.AWrmed FM OCPO lesm4(111 01"116 styrene a 20M 0! A 101 'C4 134 111 114 111 123 124 12' 1K. 132 130 140 143 '4t! 14D tr9.t$03 s%etyrtnel 00051+2COC
R. tapphcdm 0184a%stpones 2000 ice^ L7 133 '39 tU 140 155 16C 1N 171 1". is.I 16E '63 1W I 2Ca 21C 21E i(02744 s%airmt) 0029d1+2M
Fdament aWkatwn vI t VSR" 0.120 a%styrene a 20M 70 a3 BD 00 03 07 t00 104 133"835
11 115 116 1 2 1:5 IN 133 '3E 14C 0.95 x(10.2746 a%slynns)-0.029d1 s 3000
C koar AppAce.on 0.4t3 a%styrene s 1000 2Ps 3*" 333 3•JS 7 3W 419 439 01 SC 7 022 343 �50"4 e94 SC'. Ke (n.03649 4%styrene) OtSlfx2000
0.GGekdar Conboad Spy Amoacadkn` 0.325s%styrene a 2000 213 230 245 2e3 215 200 205 32t 1 3M 30, aye 427 M2 457 472 0.1I a(it Ai6t[a%styran<I 01951a2000
Gokoat N.AtidAplr0EatmWI SEEE Note S±aew Toe 203 214 223 212 241 .51 2S0 70 -61 20e Ke ?23 332 ?A' 'ac 0045" %Sir.)-0090%.2000
I..Atomiaod Gofoaad Applicatbn'.2 fer•70.0.>Zlx%seymek 2:0 241 2S' :e4 2?8 26' 200 VI 34 340 33' Y0 361 '+ ( 7r 1 ix2000 '_< -02 aC4 4/9 a28 t 0�47 x%s sm 0 07025 a 2900
Cmorod.CYA a9r Rol Ow Nm+.VSR pgMsa amiNim lataer Iwrd afrrnj > C 90 for Mango on C 6!M MecKu III
Cayered4;mo of Mm RoS-Ow Non-VSR process emfssionfxsm psaw atowl . C SC for VU - vn:eb W Mfc^ar.a;.
Emassion Rate in Pounds of Methyl Methacryiate Emitted per Ton of Gelcoat Processed
MMA tuMent to gakon.% 1 } ] a 5 9 7 0 1 9 10 11 8 0 14 IS 16 t7 1; 16 13 _-.
n
OM tort+tylkaNm 15 _ 4' C: 6n uE 122 13!1 ltO 11511 lea 1 '65 1 2-c 1 --4-1 2 c .`'Al,': �
NoM n' :nyaudnD i•/rse nsyaur cuaarc as s,tOlnd P-..a arty 4xta fryel•+e rnoncnr at•E] y :1 cu:! c:'�.r.:1Idle atMrves sa:f as Ww¢bs.f.rs,21n1_ e¢
2 Fpn Ix nartras rah spen stxasN•33%we Used m to*oISsRA fare at"% o^sam emaso*lxw excrKsd as Wfcem of a at*my"'.arN far Wt :faxent>`.CL:.r-'M er1 S pass?Corr]N x:raps.at4 'a:w•ec.€: s;nfse
are act baud on test ss5 bu�paaartt 10 M CMt•eTNe 1FamitK �e yaRN b'Y F�Ier1a n 1M Ur'n;ras Sf1orM tN glut as a salt4n For entlpN.N4Ir'!nput awe O IC fp a rasa tort.. ,:•-4 xrMrlt 4ry nt n
7ek V3R neutron facto s wtamE dy teslas0 each ryrvtappft{dJN fdfnNVllm.0*p q m B pocsdlnes detaoed n M CFA Vaper Sap/nssam Eiifm nros teat
SEE rk CFA ConpdNd spay ftamlOma+a a axa oa sep:rpmn of"x•nored sorry vwfarK 0
! 'M star:d vapor swwat{area r1 ervas,om hen 51 ft ankdp o aims s baud m dte no.F'I3tmerrr Ira ding Enrico.Sft*
v "Go"If~^*corner mnere as M*PW 0.ab esta WA m xrr+r aaded by the-east.tha befue sastxr O cM aootm wen as asroers,'/lms.pass., es, n
? 8asoc a'peepN data tern W WA Emk{idn snwy C
8 SEE S»tuy 17.2ID'EEC'_fe0an Esesaym Factor for Non-Atmniaed Applisatkov of Ge1 Caads aed n Nee Opine MWdnp of Compositor ter a dalaled ft.VIa1 t1111a rg ~csd 0s'cotl leuup T
w 0 use ba"wtsw 004606 a%styrene{-6.05037 x 20001n 90koits wih sly,":oltenn teloeen"h xw 3 ty W..: -.se?e asdandn 0163 a%styrene a 2000 fof 0talca s"W iess than I^went:: n Oe W.
'C ReNr 10 ieCon 10.tnsirsv-twos st+d E>anp+K for ne Ennssa4 Fad hbe.3 2 Ceroulaapl of" oily,5"^ Wta ;a
t Aso this rpoeyr br a+v npnatmsa4d appu alion of OCPO o•DCV CG oserd rpcm.trh9n fdNd to 90%W IWI by Repo 1J
Tame Apra 30%TO 32% clymr+t roment 30 31 32IL
O
124 20E 2t9 .a
G

Iconic Marine Group Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical N (%)
3MFillet 3MFillet Mechanical Non-Atomized Styrene 28.90% 0.0309
6441-800 Resin(6441 A00) No emissions Cobalt Naphthenate 0.07% 0.0000
6441-800 Resin(64414t00) No emissions Cobalt Neodecanoate 0.07% 0.0000
6441-800 Resin(644"00) Mechanical Non-Atomized Styrene 34A9% 0.0385
707061 EZ Sanding Grey Primer(707-061) NIA—assume all emitted Methyl Ethyl Ketone 4.80% 0.0480
707061 EZ Sanding Grey Primer(707-061) WA—assume all emitted Styrene 16.60% 0.1660
945GA104 Green Tooling Gelcoat(945GA104) No emissions Cobalt 2-Ethylhexanoate 0.06% 0A000
945GA104 Green Tooling Gelcoat(945GA104) No emissions Cobalt Neodecanoate 0.04% 0.0000
945GA104 Green Tooling Gelcoat(945GA104) Gelwat Application-MMA Methyl Memacrylate 4.15% 0.0375
945GAID4 Green Tooling Gelcoat(945GA104) Gelcoat Application Styrene 42.30% 0.2505
945YA058 Polycor Up Orange Tooling Gelcoat(945YA0 N/A—assume all emitted Ethylbenzene 0.17% 0.0017
945YA058 Polywr IJF Orange Tooling Gelcoat(945YA0 Gelwat Application-MMA Methyl Methacrylata 4.00% 0.0300
945YA058 Polywr OF Orange Tooling Gelcoat(945YA0 Gelwat Application Styrene 41.80% 0.2405
AME100IT30 Resin(AME1001T30) No emissions Cobalt 2-Ethylhexanoate 0.11% 0.0000
AME1001T30 Resin(AME1001T30) No emissions Cobalt Hydroxide 0.01% 0.0000
AME1001T30 Resin(AME1001T30) No emissions Cobalt Neodecanoate 0.05% 0.0000
AME1001T30 Resin(AME1001T30) Mechanical Non-Atomized Styrene 34.01% 0.0345
AME1001T35 Resin(AME1D01T35) No emissions Cobalt 2-Ethythexanoate 0.11% 0.0000
AME1001T35 Resin(AME1001T35) No emissions Cobalt Hydroxide 0.01% D.0000
AME1001T35 Resin(AMEID01T35) No emissions Cobalt Neodecanoate 0.05% 0.0000
AME1001T35 Resin(AME1001T35) Mechanical Non-Atomized Styrene 33.90% 0.0345
AME1001T40 Resin(AME1001T40) No emissions Cobalt 2-Ethylhexanoate 0.11% 0.0000
Page 7 of 6

Iconic Marine Group Washington Plant Emission Factor Documentedon
Weight% E-Factor
Product Number Product Name LIEF Row Chemical (%) (%)
AME100IT40 Resin(AME1001T40) No emissions Cobalt Hydroxide 0.01% 0.0000
AME1001T40 Resin(AME1001T40) No emissions Cobalt Neodecanoate 0.05% 0.0000
AME1001T40 Resin(AME1001T40) Mechanical Non-Atomized Styrene 33.88% 0.0370
AME6001160 Infusion Resin(AME6001160) No emissions Cobalt 2-Ethylhexenoate 0.16% 0.0000
AME6001160 Infusion Resin(AME6001160) Mechanical Non-Atomized Styrene 39.08% 0.0465
AME6001T45 Resin(AME6001T45) No emissions Cobalt 2-Ethylhexanoale 0.08% 0.0000
AME6001T45 Resin(AME6001T45) No emissions Cobalt Hydroxide a01% 0.0000
AME6001T45 Resin(AME6001T45) No emissions Cobalt Neodecanoate 0.03% 0.0000
AME6001T45 Resin(AME6001T45) Mechanics]Non-Atomized Styrene 34.03% 0.0370
Ajay1201 Arley Fillet Putty(1201) Manual Styrene 35.00% 0.0470
May4501 Ajay Fillet Putty(4501) Mechanical Non-Atomized Styrene 37.00% 0.0415
Aday7121 Arlay Fillet Putty(7121) Mechanical Non-Atomized Styrene 31.00% 0.0332
AxCX500 XTEND(CX-500) NIA—assume all emitted Methyl Ethyl Ketone 40.00% 0.4000
AXCX500 XTEND(CX500) N/A—assume all emitted Toluene 30.D0% 0.3000
AXCX500 XTEND(CX-500) N/A—assume at emitted Xylene(mixed isomers) 30.00% 0.3000
B70 Corebond Adhesive(070) NIA—assume all emitted Dimethylaniline 0.22% 0.0022
B70 Corebond Adhesive(B70) Manual Styrene 32.21% 0.0406
B71 Corebond Adhesive(B71) Manual Styrene 34.90% 0.0470
BGMRR8015 Black Gelcoat(BGMRR80t5) No emissions Cobalt 2-Elhylhexanoate 0.12% 0.0000
BGMRR8015 Black Gelcoat(BGMRR8015) No emissions Cobalt Neodecanoate 0.01% 0.0000
BGMRR8015 Black Gelccal(BGMRR8015) Gelcoal Application-MMA Methyl Methacrylate 4.60% 0.0375
BGMRR8015 Black Gelcoat(BGMRR8015) Gelcoat Application Styrene 40.37% 0.2300
BPOPaste Green SPO Paste H50 N/A No reportable HAPs 0.00% 0.0000
Page 2 of 6

Iconic Marine Group Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical (%) (%)
CadoxD50 Catalyst(Gadox D50) N/A—assume all emitted Methyl Ethyl Ketone 2.00% 0.0200
CadoxD50 Catalyst(Cadox D50) WA No reportable HAPs 0.00% 0.0000
CHL 15 Chemlease 15 N/A No reportable HAPs 0.00% 0.0000
CHL 2697 Chemlease Sealer 2697 WA No reportable HAPs 0.00% 0.D000
CHL MC Chemlease Mold Cleaner NIA—assume all emitted Methyl Ethyl Ketone 50.D0% 0.5000
CHL MC Chemlease Mold Cleaner N/A No reportable HAPs 0.00% 0.0000
DC2000 Clear(DC2000) N/A No reportable HAPs 0.00% 0.0000
DCU2021 Clear(DCU2021) N/A—assume all emitted Ethylbenzene 5.30% 0.0530
DCU2021 Clear(DCU2021) N/A—assume all emitted Methyl MethacMate 0.20% 0.0020
DCU2021 Clear(DCU2021) N/A—assume all emitted Styrene 0.40% 0.0040
DCU2021 Clear(DCU2021) N/A—assume all emitted Xylene(mixed isomers) 30.10% 0.3010
DCX61 Hardener(DCX61) N/A No reportable HAPs 0.00% 0.0000
DDM-9 Luperox DDM-9 Catalyst WA—assume all emitted Methyl Ethyl Ketone 2.00% 0.02D0
DDM-9 Luperox DDM-9 Catalyst WA No reportable HAPs 0.00% 0.0000
DT870 Reducer(DT870) N/A—assume all emitted Toluene 19.00% 0.1900
DT885 Reducer(DT885) NIA—assume all emitted Ethylbenzene 0.90% 0.DD90
DT885 Reducer(DT885) N/A—assume all emitted Methyl Ethyl Ketone 19.00% 0.1900
DT885 Reducer(DT885) N/A—assume all emitted Toluene 10.50% 0.1050
DT885 Reducer(DT885) N/A—assume all emitted Xylene(mixed isomers) 5.20% 0.0520
Flex-Z Flex-Z 1,2,3,4,5&6 NIA No reportable HAPs 0.00% 0.0000
GGLE4186 Aqua Mist Gelcoat(GGLE4186) No emissions Cobalt 2-Ethylhexanoate 0.D9% 0.0000
GGLE4186 Aqua Mist Gelcoat(GGLE4186) No emissions Cobalt Neodecanoate 0.02% 0.0000
GGLE4186 Aqua Mist Gelcoat(GGLE4186) Gelcoat Application-MMA Methyl Methacrylate 2.99% 0.0225
Page 3 o/d

Iconic Marine Group Washington Plant Emission Factor Dowmenlatim
Weight% E-Factor
Product Number Product Name UEF Row Chemical (%) (%)
GGLE4186 Aqua Mist Gelcoat(GGLE4186) Gelcoat Application Styrene 25.25% 0.1124
H834RAA30 Polyester Resin(1­1834RAA30) Mechanical Non-Atomized Styrene 3.4.10% 0.0385
H834RAA35 Polyester Resin(H834RAA35) Mechanical Non-Atomized Styrene 34.10% 0.0385
H834RAA40 Polyester Resin(HB34RAA40) Mechanical Non-Atomized Styrene 34.10% 0.0385
HIPt 90 Hi Point 90 N/A—.04%emitted per Ind guide Dimathyl Phthalate 36.00% 0.0001
HiPt 90 Hi Point 90 N/A—assume all emitted Methyl Ethyl Ketone 1.00% 0.0100
Honeywax Honey Wax(P52314R) NIA No reportable HAPs 0.00% 0.0000
10517 Patch Booster(10517) Gelcoat Application-MMA Methyl Methacrylate 17.00% 0.1275
10517 Patch Booster(10517) Manual Styrene 40.00% 0.0615
10517 Patch Booster(10517) WA—assume all emitted Xylene(mixed isomers) 2.00% 0.0200
LGLE4214 Blue Gelcoat(LGLE4109) No emissions Cobalt 2-Elhylhexanoate 0.06% 0.0000
LGLE4214 Blue Gelcoat(LGLE4109) No emissions Cobalt Hydroxide 0.01% 0.0000
LGLE4214 Blue Gelcoat(LGLE4109) No emissions Cobalt Necdecanoate 0.04% 0.0000
LGLE4214 Blue Gelcoat(LGLE4109) Gelcoat Application-MMA Methyl Methacrylate 2.80% 0.0225
LGLE4214 Blue Gelcoat(LGLE4109) Gelcoat Application Styrene 28.96% 0.1289
LGLE4230 Blue Gelcoat(LGLE4230) No emissions Cobalt 2-Ethylhexanoate 0.09% 0.0000
LGLE4230 Blue Gelcoat(LGLE4230) No emissions Cobalt Neodecanoate 0.02% 0.0000
LGLE4230 Blue Gelcoat(LGLE4230) Gelcoat Application-MMA Methyl Methacrylate 2.97% 0.0225
LGLE4230 Blue Gelcoat(LGLE4230) Gelcoat Application Styrene 25.09% 0.1117
LGNCP6054 Blue Gelcoat(LGNCP6054) No emissions Cobalt 2-Ethylhexanoate 0.13% 0.0000
LGNCP6054 Blue Gelcoat(LGNCP6054) No emissions Cobalt Hydroxide 0.01% 0.0000
LGNCP6054 Blue Gelcoat(LGNCP6054) No emissions Cobalt Neodecanoate 0.04% 0.0000
LGNCP6054 Blue Galloped(LGNCP6054) Gelooat Application Styrene 30.70% 0.1366
Page 4 of 6
l

Iconic Marine Group Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical N (%)
LHB2508 Interior White Gelcoat(LHB2508) Gelcoat Application Styrene 19.00% 0.0846
MA2090 ITW Plexus Adhesive(MA2090) MSDS Methyl Methacrylate 54.50% 0.0505
MA560 ITN Plexus Adhesive(MA560) MSDS Methyl Methacrylate 60.00% 0,0504
NGNCP7050 Driftwood Gelcoat(NGNCP7050) No emissions Cobalt 2-EMylhesanoate 0.13% 0.0000
NGNCP7050 Driftwood Gelcoat(NGNCP7050) No emissions Cobalt Hydroxide a01% 0,0000
NGNCP7050 Driftwood Gelcoat(NGNCP7050) No emissions Cobalt Neodecanoate 0.04% 0.0000
NGNCP7050 Driftwood Gelcoat(NGNCP7050) Gelcoat Application Styrene 30.65% 0.1364
R015APF55 Infusion Resin(R015APF55) Closed Molding Styrene 37.00% 0.0111
R049GPF33 VE Resin(R049GPF33) No emissions Cobalt 2-Ethylhexanoate 0.30% 0.0000
R049GPF33 VE Resin(R049GPF33) Gelcoat Application-MMA Methyl Methacrylate 2.00% 0.0150
R049GPF33 VE Resin(R049GPF33) Mechanical Non-Atomized Styrene 39.60% 0.0465
REV2879 Prcline White Gelcoat(REV2879) Gelcoat Application-MMA Methyl Methacrylate 3.00% 0.0225
REV2879 Proline White Gelcoat(REV2879) Gelcoat Application Styrene 26.00% 0.1157
RHD7026 Yellow Gelcoat(RHD7026) Gelcoat Application-MMA Methyl Methacrylate 3.00% 0.0225
RHD7026 Yellow Gelcoat(RHD7026) Gelcoat Application Styrene 24.00% 0.1068
RHD9024 Frost Gray Gelcoat(RHD9024) Gelcoat Application-MMA Methyl Methacrylate 3.00% 0,0225
RHD9024 Frost Gray Gelcoat(RHD9024) Gelcoat Application Styrene 30.00% 0.1335
RVP2879 White Gelcoat(RVP2879) Gelcoat Application-MMA Methyl Methacrylate 6.00% 0.0,450
RVP2879 White Gelcoat(RVP2879) Gelcoat Application Styrene 28.00% 0.1246
SXAS40 Paint Solvent(SXA840) N/A—assume all emitted 1,2,4-Trimethylbenzene 0.10% 0.0010
SXAS40 Paint Solvent(SXA840) N/A—assume all emitted Toluene 0.20% 0.0020
VPR0012 Barrier Coat(VPR0012) No emissions Cobalt 2-Ethylhexanoate 0.09% 0.0000
VPR0012 Barrier Coat(VPRO012) No emissions Cobalt Neodecanoate 0.02% 0.0000
Page S ol6

Iconic Marine Group Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical (%) (%)
VPR0012 Barrier Coat(VPR0012) Gelcoat Application Styrene 31.84% 0.1417
WGLE4474 TW White Gelcoat(WG33LE4474) No emissions Cobalt 2-Ethylhexanoate 0.09% 0.0000
WGLE4474 TW White Gelcoat(WG33LE4474) No emissions Cobalt Neodecanoate 0.02% 0.0000
WGLE4474 TW White Gelcoat(WG33LE4474) Gelcoat Application-MMA Methyl Metbacrylate 2.99% 0.0225
WGLE4474 TW White Gelcoat(WG33LE4474) Gelcoat Application Styrene 25.27% 0.1125
WS0010 Wax Solution(WS0010) Manual Styrene 90.00% 0.2045
Page 6 of

Iconic Marine Group Washington Plant:Usage and VOC 8:HAP Emissions Year Ending: December 2017
3MFillet Usage(gal): 195.0 VOC Content(wt%): 0.289 VOCs(lbs): 64.4
3MFillet Usage(Ibs): 2,081.7 HAP Content(wt%): 0.289 HAPs(Ibs): "A
Density(lb/gal): 10.68
CAS No Chemical Weight% E-Factor HAPITAP Lbs
100-42-5 Styrene 28.90% 0 031 64.371
6441-800 Usage(gal): 50.3 VOC Content(wt%): 0.3461 1 VOCs(Ibs): 17.4
Resin(6441.800) Usage(Ibs): 452.0 HAP Content(wt%): 0.345 HAPs(lbs), 17.4
Density(lb/gal): 8.99
CAS No Chemical Weight% E-Factor HAPITAP Lbs
100-42-5 Styrene 34.49% 0.039 17.402
707061 Usage(gal): 132.0 VOC Content(wt%): 0.301 VOCs(lbs): 469.9
EZ Sanding Grey Primer(707- Usage(Ibs): 1,563.2 HAP Content(wt%): 0.166 HAPs(Ibsh 259.5
061) Density(lb/gal): 11.84
CAS No Chemical Weight% E-Factor HAPITAP Lbs
100-42-5 Styrene 16.60% 0.166 259.499
945GA104 Usage(gal): 14.9 VOC Content(wt%): 0.465 VOCs(lbs): 38.9
Green Tooling Gelcoat Usage(Ibs): 135.0 HAP Content(wt%): 0.464 HAPs(Ibs): 38.9
(945GA104) Density(lb/gal): 9.06
CAS No Chemical Weight% E-Factor HAPITAP Lbs
80-62-6 Methyl Methacrylate 4.15% 0.038 5.063
100-42-5 Styrene 42.30% 0.251 33.818
945YA058 Usage(gal): 14.8 VOC Content(wt°%): 0.462 VOCs(Ibs): 37.1
Polycor OF Orange Tooling Usage(Ibs): 135.0 HAP Content(wt%): 0.460 HAPs(Ibs): 36.7
Gelcoat(945YA058) Density(Ib/gal): 9.12
CAS No Chemical Weight% E-Factor HAPITAP Lbs
100-41-4 Ethylbenzene 0.17% 0.002 0.230
80-62-6 Methyl Methacrylate 4.00% 0.030 4.050
100-42-5 Styrene 41.80% 0.241 32.468
AME1001T30 Usage(gal): 3,128.9 VOC Content(wt%): 0.342 VOCs(Ibs): 969.2
Resin(AME1001T30) Usage(Ibs): 28,130.0 HAP Content(wt%): 0.340 HAPs(Ibs): 969.2
Density(lb/gal): 8.99
CAS No Chemical Weight% E-Factor HAPITAP Lbs
100-42-5 Styrene 34.01% 0.034 969.191
AME1001T35 Usage(gal): 2,795.2 VOC Content(wt%): 0.341 VOCs(Ibs): 865.8
Resin(AME1001T35) Usage(Ibs): 25,130.0 HAP Content(wt%): 0.339 HAPs(lbs): 865.8
Density(lb/gal): 8.99
CAS No Chemical Weight% E-Factor HAPITAP Lbs
100.42-5 Styrene 33.90% 0.034 865.829
©Value Environmental 6/12/2018 Page 1 of 8

Iconic Marine Group Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2017
AME100IT40 Usage(gal): 11,206.6 VOC Content(wt%): 0.341 VOCs(Ibs): 3,727.9
Resin(AME1001 T40) Usage(lbs): 100,752.9 HAP Content(wt%): 0.339 HAPs(lbs): 3,727.9
Density(lb/gal): 8.99
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
100.42-5 Styrene 33.88% 0.037 3,727.857
AME6001160 Usage(gal): 431.E VOC Content(wt%): 0.3921 1 VOCs(lbs): 180.4
Infusion Resin(AME6001160) Usage(lbs): 3,880.0 HAP Content(wt%: 0.391 HAPs(lbs): 180.4
Density(lb/gal): 8.99
CAS No Chemical Weight% E-Factor HAPITAP Lbs
100-42-5 Styrene 39.08% 0.047 180.420
AME600IT45 Usage(gal): 53.9 VOC Content(wt%): 0.342 VOCs(lbs): 17.8
Resin(AME6001T45) Usage(lbs): 485.0 HAP Content(wt%): 0.340 HAPs(lbs): 17.9
Density(lb/gal): 8.99
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
100-42-5 Styrene 34.03% 0.037 17.945
Arjayl201 Usage(gal): 50.0 VOC Content(wt%): 0.350 VOCs(lbs): 12.9
Arjay Fillet Putty(1201) Usage(lbs): 275.2 HAP Content(wt°/a): 0.350 HAPs(lbs): 12A
Density(lb/gal): 5.50
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
100.42-5 Styrene 35.00% 0.047 12.935
Arjay4501 Usage(gal): 130.0 VOC Content(wt%): 0.370 VOCs(lbs): 27.4
Arjay Fillet Putty(4501) Usage(lbs): 661.4 HAP Content(wt%): 0.370 HAPs(lbs): 27.4
Density(lb/gal): 5.09
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
100.42-5 Styrene 37.00% 0.042 27.447
Arjay7121 Usage(gal): 95.0 VOC Content(wt%): 0.310 VOCS( s 311.0
Aday Fillet Putty(7121) Usage(lbs): 934.9 HAP Content(wt%): 0.310 HAPs(lbs): 31.0
Density(Ib/gal): 9.84
CAS No Chemical Weight% E-Factor HAPITAP Lbs
100-42-5 Styrene 31.00% 0.033 31.011
AxCX500 Usage(gal): 4.0 VOC Content(wt%): 1.000 VOCs(lbs): 28.0
XTEND(CX-500) Usage(lbs): 28.0 HAP Content(wt%): 0.600 HAPs(lbs): 16.8
Density(lb/gal): 7.01
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
108-88-3 Toluene 30.00% 0.300 8.407
1330-20-7 Xylene(mixed isomers 30.00% 0.300 8.407
©Value Environmental 6/12/2018 Page 2 of 8

Iconic Marine Group Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2017
B70 Usage(gal): 310.0 VOC Content(wt%): 0.324 VOCs(lbs): 82.9
Corebond Adhesive(B70) Usage(Ibs): 1,939.1 HAP Content(wt%): 0.324 HAPs(lbs): 82.9
Density(lb/gal): 6.26
CAS No Chemical Weight% E-Factor HAPITAP Lbs
121-69-7 Dimethylaniline 0.22% 0.002 4.231
100-42-5 Styrene 32.21% 0.041 78.703
B71 Usage(gal): 3,795.0 VOC Content(wt%): 0.349 VOCs(lbs): 1,457.8
Corebond Adhesive(B71) Usage(Ibs): 31,017.3 HAP Content(wt%): 0.349 HAPs(lbs): 1.457-9
Density(Ib/gal): 8.17
CAS No Chemical Weight% E-Factor HAPITAP Lbs
100-42-5 Styrene 34.90% 0.047 1,457.813
BGMRR8015 Usage(gal): 100.1 VOC Content(wt%): 0.451 VOCs(Ibs): 240.8
Black Gelcoat(BGMRR8015) Usage(Ibs): 900.0 HAP Content(wt%): 0.450 HAPs(Ibs): 240.8
Density(lb/gal): 8.99
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 4.60% 0.038 33.750
100-42-5 Styrene 40.37% 0.230 207.000
BPOPaste Usage(gal): 4.1 VOC Content(wt%): 0.200 VOCs(lbs): 8.1
Green BPO Paste H50 Usage(lbs): 40.6 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 10.01
CAS No Chemical Weight% E-Factor HAPITAP Lbs
No reportable HAPs 0.00% 0.000 0.000
CadoxD50 Usage(gal): 260.8 VOC Content(wt%): 0.020 VOCs(lbs): 43.5
Catalyst(Cadox D50) Usage(Ibs): 2,175.0 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Density(lb/gal): 8.34
CAS No Chemical Weight% E-Factor HAPITAP Lbs
No reportable HAPs 0.00% 0.000 0.000
CHL 15 Usage(gal): 16.0 VOC Content(wt%): 1.000 VOCs(Ibs): 116.1
Chemlease 15 Usage(lbs): 116.1 HAP Content(wt%): 0.0001 1 HAPs(lbs): 0.0
Density(lb/gal): 7.26
CAS No Chemical Weight% E-Factor HAPITAP Lbs
No reportable HAPs 0.00% 0.000 0.000
CHI.2697 1 Usage(gal): 44.0 VOC Content(wt%): 0.996 VOCs(lbs): 270.6
Chemlease Sealer 2697 1 Usage(Ibs): 271.6 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 6.17
CAS No Chemical Weight% E-Factor HAPITAP Lbs
No reportable HAPs 0.00% 0.000 0.000
©Value Environmental 6/12/2018 Page 3 of 8
1

Iconic Marine Group Washington Plant:Usage and VOC 8.HAP Emissions Year Ending: December 2017
CHL MC Usage(gal): 36.0 VOC Content(wt°/.): 1.000 VOCs(lbs): 225.2
Chemlease Mold Cleaner Usage(lbs): 226.2 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 6.26
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.000
DC2000 Usage(gal): 5.5 VOC Content(wt%): 0.352 VOCs(lbs): 15.2
Clear(DC2000) Usage(lbs): 43.2 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 7.85
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.000
DCU2021 Usage(gal): 8.0 VOC Content(wt%): 0.508 VOCs(lbs): 32.2
Clear(DCU2021) Usage(lbs): 63.5 HAP Content(wt%): 0.360 HAPs(lbs): 22.9
Density(Ib/gal): 7.94
CAS No Chemical Weight% E-Factor HAPITAP Lbs
100414 Ethylbenzene 5.30% 0.053 3.367
80-62-6 Methyl Methacrylate 0.20% 0.002 0.127
100.42-5 Styrene 0.40% 0.004 0.254
1330-20-7 Xylene(mixed isomers 30.10% 0.301 19.120
DCX61 Usage(gal): 2.3 VOC Content(wt%): 0.161 VOCs(Ibs): 3.2
Hardener(DCX61) Usage(lbs): 20.2 HAP Content(wt%): 0.000 HAPs(lbs): O.0
Density(lb/gal): 8.97
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.000
DDM-9 Usage(gal): 179.6 VOC Content(wt%): 0.025 VOCs(lbs): 37.0
Luperox DDM-9 Catalyst Usage(Ins): 1,504.0 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 8.37
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0 000 0.000
DT870 Usage(gal): 4.0 VOC Content(wt%): 1.000 VOCs(lbs): 27.6
Reducer(DT870) Usage(lbs): 27.6 HAP Content(wt%): 0.190 HAPs(lbs): 5.3
Density(lb/gal): 6.91
CAS No Chemical Weight% E-Factor HAPITAP Lbs
108-88-3 Toluene 19.00% 0.190 5.252
DT885 Usage(gal): 16.0 VOC Content(wt%): 1.0001 1 VOCs(lbs): 112.6
Reducer(DT885) Usage(lbs): 112.6 AP Content(wt%): 0.166 HAPs(ibs): 18.7
Density(Ib/gal): 7.04
CAS No Chemical Weight% E-Factor HAPITAP Lbs
100-41-4 Ethylbenzene 0.90% 0.009 1.014
108-88-3 Toluene 10.50% 0.105 11.827
1330-20-7 Xylene(mixed isomers 5.20% 0.052 5.857
0 Value Environmental 6/12/2018 Page 4 of 8

Iconic Marine Group Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2017
Flex-Z Usage(gal): 152.0 VOC Content(wt%): 0.900 VOCs(lbs): 798.6
Flex-Z 1,2,3,4,5&6 Usage(Ibs): 887.4 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Density(lb/gal): 5.84
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.000
GGLE4186 Usage(gal): 66.5 VOC Content(wt%): 0.284 VOCs(lbs): 80.6
Aqua Mist Gelcoat(GGLE4186) Usage(Ibs): 598.0 HAP Content(wt%): 0.282 HAPs(lbs): 80.6
Density(lb/gal): 8.99
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 2.99% 0.023 13.455
100-42-5 Styrene 25.25% 0.112 67.193
H834RAA30 Usage(gal): 109.0 VOC Content(wt%): 0.3411 1 VOCs(lbs): 38.5
Polyester Resin(H834RAA30) Usage(Ibs): 1,000.0 HAP Content(wt%): 0.3411 1 HAPs(lbs): 38.5
Density(lb/gal): 9.17
CAS No Chemical Weight% E-Factor HAPITAP Lbs
100-425 Styrene 34.10% 0.039 38,500
H834RAA35 Usage(gal): 317.2 VOC Content(wt°/.): 0.341 VOCs(Ibs): 112.0
Polyester Resin(H834RAA35) Usage(lbs): 2,910.0 HAP Content(wt°/.): 0.341 HAPs(Ibs): 112.0
Density(lb/gal): 9.17
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
100-42-5 Styrene 34.10% 0 039 112.035
H834RAA40 Usage(gal): 9,602.1 VOC Content(wt%): 0.341 VOCs(Ibs): 3,391.5
Polyester Resin(H834RAA40) Usage(Ibs): 88,090.0 HAP Content(wt%): 0.341 HAPs(lbs): 3.391.5
Density(Ib/gal): 9.17
CAS No Chemical Weight% E-Factor HAPITAP Lbs
100-42-5 Styrene 34.10% 0.039 3,391.465
HiPt 90 Usage(gal): 243.4 VOC Content(wt%): 0.3701 1 VOCs(Ibs): 22.1
Hi Point 90 Usage(lbs): 2.176.2 HAP Content(wt%): 0.360 HAPs(Ibs): 0.3
Density(lb/gal): 8.94
CAS No Chemical Weight% E-Factor HAPITAP Lbs
131-11-3 Dimethyl Phthalate 36.00% 0.000 0.313
Honeywax Usage(gal): 56.3 VOC Content(wt%): 0.698 VOCs(lbs): 261.4
Honey Wax(P52314R) Usage(Ibs): 374.5 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 6.65
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.000
©Value Environmental 6/12/2018 Page 5 of 8

Iconic Marine Group Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2017
10517 Usage(gal): 30.0 VOC Content(wt%): 0.610 VOCs(lbs): 57.9
Patch Booster(10517) Usage(lbs): 252.7 HAP Content(wt%): 0.590 HAPs(lbs): 52.8
Density(Ib/gal): 8.42
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 17.00% 0.128 32.220
100-42-5 Styrene 40.00% 0.062 15.541
1330-20-7 Xylene(mixed isomers 2.00% 0.020 5.054
LGLE4214 Usage(gal): 158.1 VOC Content(wt%): 0.319 VOCs(lbs): 215.1
Blue Gelcoat(LGLE4109) Usage(lbs): 1,421.0 HAP Content(wt%): 0.318 HAPs(lbs): 215.1
Density(lb/gal): 8.99
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80.62-6 Methyl Methacrylate 2.80% 0.023 31.973
100-42-5 Styrene 28.96% 0.129 183.127
LGLE4230 Usage(gal): 281.6 VOC Content(wt%►: 0.282 VOCs(lbs): 407.7
Blue Gelcoat(LGLE4230) Usage(lbs): 3,039.0 HAP Content(wt°/,): 0.281 HA Pa(lbs): 407.7
Density(lb/gal): 10.79
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80.62-6 Methyl Methacrylate 2.97% 0.023 68.378
100-42-5 Styrene 25.09% 0.112 339.306
LGNCP6054 Usage(gal): 240.51 VOC Content(wt%): 0.309 VOCs(lbs): 318.3
Blue Gelcoat(LGNCP6054) IUsage(lbs): 2,330.21 HAP Content(wt%): 0.307 HAPs(lbs): 318.3
Density(lb/gal): 9.69
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
100-42-5 Styrene 30.70% 0.137 318.346
LHB2508 Usage(gal): 430.5 VOC Content(wt%): 0.190 VOCa(lbs): 452.3
Interior White Gelcoat(LHB2508) Usage(lbs): 5,350.0 HAP Content(wt%): 0.190 HAPs(lbs): 452.3
Density(11 /gal): 12.43
CAS No Chemical Weight% E-Factor HAPITAP Lbs
100-42-5 Styrene 19.00% 0.085 452.343
MA2090 Usage(gal): 1,910.0 VOC Content(wt°ib): 0.545 VOCs(lbs): 797.0
ITW Plexus Adhesive(MA2090) Usage(lbs): 15,770.1 HAP Content(wt%): 0.545 HAPs(lbs): 797-0
Density(lb/gal): 8.26
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 54.50% 0.051 796.986
MA560 Usage(gal): 1,262.1 VOC Content(wt%): 0.624 VOCs(lbs): 772.8
ITW Plexus Adhesive(MA560) Usage(lbs): 10,420.7 HAP Content(wt%): 0.600 HAPs(lbs): 525.4
Density(Ib/gal): 8.26
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 60.00% 0.050 525.416
©Value Environmental 6/12/2018 Page 6 of 8

Iconic Marine Group Washington Plant:Usage and VOC$HAP Emissions Year Ending: December 2017
NGNCP7050 Usage(gal): 1,146.0 VOC Content(wt%): 0.308 VOCs(lbs): 1,530.5
Driftwood Gelcoat(NGNCP7050) Usage(Ibs): 11,221.1 HAP Content(wt%): 0.307 HAPs(lbs): 1,530.5
Density(Ib/gal): 9.79
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
100-42-5 Styrene 30.65% 0.136 1,530.468
R015APF55 Usage(gal): 1,215.9 VOC Content(wt%): 0.370 VOCs(lbs): 123.8
Infusion Resin(R015APF55) Usage(lbs): 11,155.0 HAP Content(wt%): 0.370 HAPs(lbs): 123.8
Density(lb/gal): 9.17
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
100-42-5 Styrene 37.D0% 0.011 123.821
R049GPF33 Usage(gal): 528.7 VOC Content(wt%): 0.421 VOCs(Ibs): 312.8
VE Resin(R049GPF33) Usage(Ibs): 4,850.0 HAP Content(wt%): 0.4151 1 HAPs(Ibs): 298.3
Density(lb/gal►: 9.17
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 2.00% 0.015 72.750
100-42-5 Styrene 39.50% 0.047 225.525
REV2879 Usage(gal): 2,151.8 VOC Content(wt%): 0.290 VOCs(lbs): 3,422.5
Praline White Gelcoat Usage(Ibs): 24,765.0 HAP Content(wt%): 0.290 HAPs(lbs): 3.422.5
(REV2879) Density(lb/gal): 11.51
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80.62-6 Methyl Methacrylate 3.00% 0.023 557.213
100-425 Styrene 26.00% 0.116 2,865.311
RHD7026 Usage(gal): 1,002.7 VOC Content(wt%): 0.270 VOCa(Ibs): 1,459.7
Yellow Gelcoat(RHD7026) Usage(Ibs): 11,289.1 HAP Content(wt%): 0.270 HAPs(Ibs): 1,459.7
Density(lb/gal): 11.26
CAS No Chemical Weight% E-Factor HAPITAP Lbs
80-62-6 Methyl Methacrylate 3.00% 0.023 254.005
100-42-5 Styrene 24.00% 0.107 1,205.679
RHD9024 Usage(gal): 51.5 VOC Content(wt%): 0.330 VOCs(Ibs): 76.3
Frost Gray Gelcoat(RHD9024) Usage(Ibs): 489.2 HAP Content(wt%): 0.330 HAPs(Ibs): 76.3
Density(lb/gal): 9.51
CAS No Chemical Weight% E-Factor HAPITAP Lbs
80-62-6 Methyl Methacrylate 3.00% 0.023 11.007
100-32-5 Styrene 30.00% 0.134 65.310
RVP2879 Usage(gal): 107.4 VOC Content(wt%): 0.340 VOCs(Ibs): 193.0
White Gelcoat(RVP2879) Usage(Ibs): 1,138.0 HAP Content(wt%): 0.340 HAPs(Ibs): 193.0
Density(Ib/gal): 10.59
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 6.00% 0.045 51.210
100-42-5 Styrene 28.00% 0.125 141.795
©Value Environmental 6/12/2018 Page 7 of 8

Iconic Marine Group Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2017
SXA840 Usage(gal): 0.1 VOC Content(wt%): 0.456 VOCs(lbs): 0.4
Paint Solvent(SXA840) Usage(lbs): 0.9 HAP Content(wt%): 0.002 HAPs(lbs): 0.0
Density(lb/gal): 7.00
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
108-88-3 Toluene 0.20% 0.002 0.002
VPR0012 Usage(gal): 1,275.9 VOC Content(wt%): 0.320 VOCs(lbs): 1,715.8
Barrier Coat(VPRO012) Usage(lbs): 12,109.1 HAP Content(wt%): 0.318 HAPs(lbs): 1,715.8
Density(lb/gal): 9.49
CAS No Chemical Weight% E-Factor HAPITAP Lbs
100.42-5 Styrene 31.84% 0.142 1,715.765
WGLE4474 Usage(gal): 724.4 VOC Content(wt%): 0.284 VOCs(lbs): 1,055.0
TW White Gelcoat Usage(lbs): 7,817.6 HAP Content(wt%): 0.283 HAPs(lbs): 1,055.0
(WG33LE4474) Density(Ib/gal): 10.79
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80.62-6 Methyl Methacrylale 2.99% 0.023 175.896
100-42-5 Styrene 25.27% 0.112 879.099
WS0010 Usage(gal): 7.8 VOC Content(wt%): 0.900 VOCs(lbs): 14.3
Wax Solution(WS0010) Usage(Ibs): 70.0 HAP Content(wt%): 0.900 HAPs(Ibs): 14.3
Density(lb/gal): 8.99
CAS No Chemical Weight% E-Factor HAPITAP Lbs
100-42-5 Styrene 90.00% 0.205 14.315
Month(Ibs) Month(tons)
VOCs: 26,791 13.40
HAPs: 24,375 12.19
©Value Environmental 611212018 Page 8 of 8