AQ_F_2100073_20131008_EI_Cmb-EI-File

QAPP Audit Form for CY2012 Point Source EI data submittals
Facility Name: Facility ID: 2. / �-7 3
Permit Number:O 2/ELT/o Assigned to: Confidential Copy Submitted?
YES [�NO
Region: A a 6 �� ❑
W
Initial Review/Data Entry
Receipt of EI properly documented
Rf If submitted through AERO, Receipt of Certification form entered in ED
Cd Was El received by June 30 deadline. f nQt,was the failure to meet the deadline documented?
ad Data entry complete date en r d VZD/3
0 Date Approval Due: 7.011,
Comments: �irfw•�*� t�.i A�
Q
Inventory Audit (verify that the checks below at a minimum have been investigated and documented.)
U All forms appear to be complete and certification form was signed by appropriate official.
0 Emissions reported for all sources(permitted, insignificant,and unpermitted)or marked as not operated or NRTR.
0 Supporting calculations, control and/or capture efficiencies and emission factor documentation included and appears
correct.
0 All known OSs,control devices and release points reported for each emission source.
Cat" All emissions above de minimus levels have been reported for all emission sources.
U Emission Factors are best available/most current.
U)"Calculations and facility totals add up correctly.
LY All QA/QC issues addressed.
U Comparison with previous emission inventory has been conducted;obvious outliers have been investigated and
explained.
3' All changes/corrections were made to the inventory and documented either on paper or DataEntryMain page.
[I' Appropriate additional comments entered on DataEntryMain page.
Auditor signature J-z Date: /40 g?v

Facility Total CY 2012 Emission Summary Recorded in ED Facility ID #: 2100073
Facility Name: Regulator Marine Inc Permit#(s): 07132TI O
Green House Gases Pollutants (GHG) Actual Emissions %
Tons/Yr
Pollutant CAS
Demini- Change
mus
Not Not N/A
Reported Reported
CO2 equivalent(sum of individual GHG pollutant emission No GHGs
times their 1995 IPCC Global Warming Potential(GWP), Reported
converted to metric tons) I T
Criteria Pollutants Actual Emissions
(Tons/Year)
Pollutant CAS CY 2012 CY 2011 Demini- %
from ED from Fees mus Change
CO Co 0.130000 0.150000 0.5 -13.3%
NOx NOx
0.600000 0.660000 0.5 -9.1%
PM TSP TSP 0.390000 0.370000 0.5 5.4%
PM 10 PM 10 0.390000 0.370000 0.5 5.4%
PM2.5 PM2.5 0.390000 0.370000 0.5 5.4%
S02 Sot 0.010000 Not 0.5 N/A
Reported
VOC VOC 25.55 28.52 0.5 -111.4°o
Hazardous Air Pollutants (HAPs) Actual Emissions
and/or Toxic Air Pollutants(TAPS) (Pounds/Year)
Pollutant CAS CY 2012 CY 2011 Demini- %
from ED from Fees mus Change
Mercury & Compounds-all total mass includes Hg Vapor Not 0.0011-10 0.001 N/A
Reported
Mercury, vapor(Component of HGQ 7439-97-6 Not 0.001150 0.001 N/A
Reported
Dimethyl phthalate 131-11 5,837.00 5,702.90 10.0 2.4%
MEK(methyl ethyl ketone, 2-butanone) 78-91 101.00 Not 100.0 N/A
Reported
Methyl methacrylate 80-62-6 1,774.00 3,479.00 1,000.0 -49.0%
Styrene 100-42-5 42,971.00 47,200.00 100.0 -9.0%
Toluene 108-88-3 226.11 166.11 1 100.0 36.1
10/07/2013 Pagel of 2

Largest Individual HAP Styrene 42,971.00 lbs
Total HAP Emissions 0,808.11 lbs
DAO's Comments Regarding Inventory
10/07/2013 Page 2 of 2

R6611; TOR
THE FINEST IN OFFSHORE SPORIFISHING BOATS
June 20, 2013
Mr. Robert Fisher, Regional Supervisor
North Carolina Department of Environmental and Natural Resources
Washington Regional Office
943 Washington Square Mall
Washington,NC,27889
Subject: CY2012 Annual Point Source Emission Inventory
Regulator Marine,Inc.
Edenton,Chowan County,NC
Facility ID: 2100073
Dear Mr. Fisher:
Regulator Marine, Inc. is a reinforced fiberglass boat manufacturing facility operating under Title V permit
number 07132T09 and is required to submit an inventory report of actual emissions of regulated compounds to
the North Carolina Division of Air Quality(DAQ)by June 30 each year for the previous year's actual air
pollutant emissions.The report has been submitted electronically to the DAQ via the Air Emissions Reporting
Online(AERO)reporting tool to meet the June 30,2013 reporting deadline for the calendar year(CY)2012
emissions. Enclosed with this letter are the supporting emission rate calculations, signed certification,and AERO
electronic mail confirmation.The emission estimates have been developed using actual 2012 material usage,
operating times,and approved emissions factors.
Emissions have from a diesel-fired emergency/peak generator operated by ElectriCities are also included since
the unit operated 77 hours in 2013.
The following is a summary of the enclosed supporting inventory documents:
1. AERO Documents
a) Signed certification
b) AERO confirmation email
2. Supporting Calculations
a) Calculation summary D
b) Diesel-fired generator calculations
c) Monthly material usage emissions
JUN 2 8 2013
Please contact me at(252)482-3837 with any questions concerni t information contained I erein
Sincerely, DAQ WARO
Erik R. Wiborg
Encl.
www.regulatormarine.con
187 Peanut Drive • P.O. Box 49 • Edenton, North Carolina 27932 • 252.482.383?

AERO DOCUMENTS

AERO Certification Page. Available after AERO
Submission

Original COPY of RECORD Date Submitted: 6/24/2013 16:28:17
Inventory Certification Form(Title V)
Facility Name: Regulator Marine Inc Facility ID : 2100073
187 Peanut Drive Permit : 07132
Edenton,NC 27932 County : Chowan
DAQ Region : WARO
North Carolina Department of Environment and Natural Resources
Division of Air Quality
Air Pollutant Point Source Emissions Inventory—Calendar Year 2012
These forms must be completed and returned even if the facility did not operate or emissions were zero
The legally defined "Responsible Official" of record for your facility is Erik Wiborg
This person or one that meets the definition below must sign this certification form.
The official submitting the information must certify that he/she complies with the requirements as specified in Title 15A
NCAC 2Q.0520(b)which references and follows the federal definition.40 CFR Part 70.2 defines a responsible as meaning one
of the following:
1.For a corporation: a president,secretary,treasurer,or vice—president of the corporation in charge of a principal
business function,or any other person who performs similar policy or decision making functions for the overall
operation of one or more manufacturing,production,or operating facilities applying for a or subject to a permit and
either
i.the facilities employ more than 250 persons or have gross annual sales or expenditures exceeding$25
million(in second quarter 1980 dollars);or
ii.the delegation of authority to such representatives is approved in advance by the permitting authority;
2.For partnership or sole propietorship;a general partner or the proprietor,respectively;
3.for a muncipality,state,federal,or other public agency includes the chief executive officer having responsibility for the
overall operations of a principal geographic unit of the agency(e.g.,a Regional Administrator of EPA).
CERTIFICATION
i ally Zcsponsibler
I certify that I am the responsible official for this facility,as described above,and hereby certify that the information contained
in this air emissions report, including attached calculations and documentation,is true,accurate and complete. (Subject to legal
enalities of up to$25,000 per occurrence and possible imprisonment as outlined in G.S.§143-215.3(a)(2))
Responsible Official's Signature Below use blue ink : Date Signed: /
Printed Name: Erik Wiborg
i nature
This form applies to Title V f iliti . If this facility is not classified as Title V,please telephone your regional office Emission
Inventory contact at once for proper forms.
Email address of Responsible Official: [e-mail]
T E,
J U N 2 8 2013
Information on this Form cannot be held con den
DAQ WARO
Original COPY of RECORD Date Submitted: 6/24/2013 16:28:17

Original COPY of RECORD Date Submitted: 6/24/2013 16:28:17
As entered in AERO
Facility Name: Regulator Marine Inc Facility ID : 2100073
187 Peanut Drive Permit: 07132
Edenton,NC 27932 County : Chowan
DAQ Region : WARO
Listing of Emission Sources and Control Devices on Permit. See instructions
DES ID on DES Description GCS ID GCS Description CD ID's
Air Permit
One fiberglass
ES-1 laminating/gelcoating operation CS-1 fiberglass mesh filters CD-1
[MACT, Subpart VVW]
ES-2 Trimming,routing and sanding of
elcoat,resins and fiberglass
I-1 resin and gelcoat storage
1-2 mold release,bonding,and contact
glue
I-3 mold release,bonding,and contact
glue
diesel-fired generator(0.312
I-4 million Btu per hour maximum
heat input)
JUN 2 8 2013
DAQ WARO
2

Original COPY of RECORD Date Submitted: 6/24/2013 16:28:17
As entered in AERO
Facility Name: Regulator Marine Inc Facility ID : 2100073
187 Peanut Drive Permit : 07132
Edenton,NC 27932 County : Chowan
DAQ Region : WARO
Emission Source & Operating Scenario List — See Instructions
DES Group ID DES ID SOS ID *OS Description
fiberglass lamination/gelcoating
ES-1 1 operation
4 NONE
ES-2 3 NONE
I-1 NONE NONE
I-2 NONE NONE
I-3 NONE NONE
I-4 2 Peak power generator operated from
off—site.
3

Original COPY of RECORD Date Submitted: 6/24/2013 16:28:17
As entered in AERO
Facility Name: Regulator Marine Inc Facility ID : 2100073
187 Peanut Drive Permit : 07132
Edenton,NC 27932 County : Chowan
DAQ Region : WARO
North Carolina Department of Environment and Natural Resources
Division of Air Quality
Air Pollutant Point Source Emissions Inventory—Calendar Year 2012
1. Emission Source ID(from permit)or ES-1
Emission Source Group ID
2. Emission Source Description: One fiberglass laminating/gelcoating operation[MACT, Subpart VVVV]
3. Operating Scenario ID/Description: OS— 1/fiberglass lamination/gelcoating operation
4. SCC Number/Description: 31401510/Boat Manufacturing;Molding and Lamination Operations
5. Throughput/units in 2012: 504338 LB/yr
(e.g.production or fuel use):
6. Fuel Information (If fuel is used) ro
Sulfur /o Ash Heat Content
Btu/units
7. Capture Efficiency
(°/o of Emissions from this Process Vented to Control 100
Device or Stack):
8. Control Device Information
Order CS—ID CD ID Control Device Description
as listed in permit)
I CS-1 CD-1 Fiberglass mesh filters on six roof exhausts
9.Emission Release Point ERP Information: Sources vented to more than one ERP use additional entry lines):
ERP ID ERP Type Height Diameter Temperature Velocity Volume Flow ERP Description
(in feet) Circle(enter ft (F) (Feet/sec) Rate(Acfm)
Rectangle(L x W)
in 0.1 feet)
EF-1 VERTICAL STACK 42 2.9 72 72.67 28800 Lamination Exhaust
4

Operating Scenario:OS— 1 Emission Source/Group ID: ES-1
10.Operating Schedule: (Source/Operating Scenario that best characterizes Calendar Year 2012)
Hours per Day ( 12 ) Days per Week ( 5 ) Weeks per Year ( 50 )
11.Typical Start&End Times For Operating Scenario: Start: 700 End: 1900
12. Seasonal Periods Percent Annual Throu hut:
an—Feb +Dec 250�o 25"�u une—Aug. 25"�o ept.—Nov. 25%
012 �arch—May
12 �012 �012
13. Actual Emissions per Pollutant L sted :
Attach calculations and documentation of emission factors or other estimation methods used.
Emissions— Emission Control
GAG CAS GHG Estimation Efficiency Emission Ef Control
Pollutants Pollutants Method Code (Net after Factor
(Tons/Year) See Instructions all controls
2012
Criteria Emissions— Emission Control
(NAAQS) Pollutant Criteria Estimation Efficiency Emission Ef Control
Pollutants Code Pollutants Method Code (Net after Factor
(Tons/Year) (See Instructions) all controls)
2012
CO CO 08 0
NOx NOx 08 0
TSP TSP 0.35 03 86 AFTER
PM10 PM10 0.35 03 86 AFTER
PM2.5 PM2.5 0.35 03 86 AFTER
S02 S02 08 0
VOC VOC 25.5 08 0
HAP/TAP Emissions Emission Control
Pollutants (In Alphabetical CAS HAP/TAPS Estimation Efficiency EmissionEF Control
Order)
(see instructions) (Pounds(Year) Method Code (Net after all Factor
See Instructions controls)
2012
Dimeth I phthalate 131-11-3 1 5837 03 0
Methyl eth lketone 78-93-3 101 03 0
Methyl methac late 80-62-6 1774 10 0
Styrene 100-42-5 42971 10 0
Toluene 108-88-3 226 03 0
5

Original COPY of RECORD Date Submitted: 6/24/2013 16:28:17
As entered in AERO
Facility Name: Regulator Marine Inc Facility ID : 2100073
187 Peanut Drive Permit: 07132
Edenton,NC 27932 County: Chowan
DAQ Region : WARO
North Carolina Department of Environment and Natural Resources
Division of Air Quality
Air Pollutant Point Source Emissions Inventory—Calendar Year 2012
1. Emission Source ID(from permit)or ES-1
Emission Source Group ID
2. Emission Source Description: One fiberglass laminating/gelcoating operation [MACT, Subpart VVVV]
3. Operating Scenario ID/Description: OS—4/fiberglass lamination/gelcoating operation
4. SCC Number/Description: Not required by facility,will be completed by DAQ
5. Throughput/units in 2012:
(e.g.production or fuel use):
6. Fuel Information (if fuel is used) ro
Sulfur %Ash Heat Content
Btu/units
7. Capture Efficiency
(%of Emissions from this Process Vented to Control
Device or Stack):
8. Control Device Information :None
Order CS—ID CD ID Control Device Description
as listed in emiit
9.Emission Release Point ERP Information: Sources vented to more than one ERP use addidonal entry lines):
ERP ID ERP Type Height Diameter Temperature Velocity Volume Flow Rate ERP Description
(in feet) Circle(enter#): (F) (Feet/sec) (Acfm)
Rectangle(L x W)
in 0.1 feet)
6

Operating Scenario: OS—4 Emission Source/Group ID: ES-1
10.Operating Schedule: (Source/Operating Scenario that best characterizes Calendar Year 2012)
Hours per Day ( 24 ) Days per Week ( 7 ) Weeks per Year ( 52 )
11. Typical Start& End Times For Operating Scenario: Start: 0 End: 2359
12. Seasonal Periods Percent Annual Throughput.
an—Feb +Dec 25% arch—May 25% une—Aug. 25% �012
ept.—Nov. 25%
�012 012 012
13. Actual Emissions per Pollutant Listed
Attach calculations and documentation of emission factors or other estimation methods used.
Emissions— Emission Control
GHG CAS GHG Estimation Efficiency Emission
Pollutants Pollutants Method Code (Net after Factor Ef Control
Tons/Year See Instructions all controls
2012
Criteria Emissions— Emission Control
(NAAQS) Pollutant Criteria Estimation Efficiency Emission
Pollutants Code Pollutants Method Code (Net after Factor Ef Control
(Tons/Year) (See Instructions) all controls)
2012
CO CO 08
NOx NOx 08
TSP TSP 08
PM10 PM10 08
PM2.5 PM2.5 08
S02 S02 08
VOC VOC 08
HAP/TAP CAS Emissions Emission Control
Pollutants (In HAP/TAPS Estimation Emission
(see instructions) Efficiency EF Control
Alphabetical Order) (Pounds/Year Method Code Factor
See Instructions) (Net after all controls)
2012
7

Original COPY of RECORD Date Submitted: 6/24/2013 16:28:17
As entered in AERO
Facility Name: Regulator Marine Inc Facility ID : 2100073
187 Peanut Drive Permit: 07132
Edenton,NC 27932 County : Chowan
DAQ Region : WARO
North Carolina Department of Environment and Natural Resources
Division of Air Quality
Air Pollutant Point Source Emissions Inventory—Calendar Year 2012
1. Emission Source ID(from permit)or ES-2
Emission Source Group ID
2. Emission Source Description: Trimming,routing and sanding of gelcoat,resins and fiberglass
3. Operating Scenario ID/Description: OS—3/fiberglass lamination/gelcoating operation
4. SCC Number/Description: Not required by facility,will be completed by DAQ
5. Throughputtunits in 2012: 0
(e.g.production or fuel use):
6. Fuel Information (If fuel is used) (/, Sulfur % Ash Heat Content
Btu/units
7. Capture Efficiency
(%of Emissions from this Process Vented to Control
Device or Stack):
8. Control Device Information :None
Order CS—ID CD ID Control Device Description
as listed inpermit)
9.Emission Release Point ERP Information: Sources vented to more than one ERP use additioeal entry lines):
ERP ID ERP Type Height Diameter Temperature Velocity Volume Flow Rate ERP Description
(in feet) Circle(enter ft (F) (Feet/sec) (Acfm)
Rectangle(L x W)
in 0.1 feet)
8

Operating Scenario: OS—3 Emission Source/Group ID: ES-2
10.Operating Schedule: (Source/Operating Scenario that best characterizes Calendar Year 2012)
Hours per Day ( 24 ) Days per Week ( 7 ) Weeks per Year ( 52 )
11.Typical Start&End Times For Operating Scenario: Start: 0 End: 2359
12. Seasonal Periods Percent Annual Throughput:
an—Feb +Dec 250�o arch—May 25"�u une—Aug. 25"�u �ept.—Nov. 25%
012 012 012 012
13. Actual Emissions ner I rit Listed
Attach calculations and documentation of emission factors or other estimation methods used.
Emissions— Emission Control
GHG CAS GHG Estimation Efficiency Emission
Pollutants Pollutants Method Code (Net after Factor Ef Control
ons/Year See Instructions all controls
2012
Criteria Emissions— Emission Control
Pollutant Criteria Estimation Efficiency Emission
(NAAant Code Pollutants Method Code y Ef Control
Pollutants (Net after Factor
(Tons/Year) (See Instructions) all controls)
2012
CO CO 08
NOx NOx 08
TSP TSP 08
PM10 PM10 08
PM2.5 PM2.5 08
S02 S02 08
VOC VOC 08
HAP/TAP Emissions Emission
Control
CAS
Pollutants (In H,e�P/TAPS Estimation Emission
(see instmctions) Method Code Efficiency Factor EF Control
Alphabetical Order) (Pounds/Year) (Net after all controls)
See Instructions
2012
9

Original COPY of RECORD Date Submitted: 6/24/2013 16:28:17
As entered in AERO
Facility Name: Regulator Marine Inc Facility ID : 2100073
187 Peanut Drive Permit : 07132
Edenton,NC 27932 County : Chowan
DAQ Region : WARO
North Carolina Department of Environment and Natural Resources
Division of Air Quality
Air Pollutant Point Source Emissions Inventory—Calendar Year 2012
1. Emission Source ID(from permit)or I-4
Emission Source Group ID
2. Emission Source Description: diesel—fired generator(0.312 million Btu per hour maximum heat input)
3. Operating Scenario ID/Description: OS—2/Peak power generator operated from off—site.
4. SCC Number/Description: 20100107/Distillate Oil(Diesel) ;Reciprocating: Exhaust
5. Throughput/units in 2012: 77 HR/yr
(e.g.production or fuel use):
6. Fuel Information (if fuel is used) ro
Sulfur 0.05 /o Ash Heat Content 137838 Btu/gallon
(Btu/units)
7. Capture Efficiency
(%of Emissions from this Process Vented to Control
Device or Stack):
8. Control Device Information :None
Order CS—ID CD ID Control Device Description
as listed in rmit
9.Emission Release Point ERP Information: Sources vented to more than one ERP use additional entry lines):
ERP ID ERP Type Height Diameter Temperature Velocity Volume Flow ERP Description
(in feet) Circle(enter#): (F) (Feet/sec) Rate(Acfm)
Rectangle(L x W)
in 0.1 feet)
EF-7 VERTICAL STACK 8 0.5 942 326.11 3842 Generator exhaust
10

Operating Scenario:OS—2 Emission Source/Group ID: I-4
10.Operating Schedule: (Source/Operating Scenario that best characterizes Calendar Year 2012)
Hours per Day ( 2 ) Days per Week ( 1 ) Weeks per Year ( 38 )
11.Typical Start&End Times For Operating Scenario: Start: 700 End: 1700
12. Seasonal Periods Percent Annual Throughput:
an—Feb +Dec 50% 0% une—Aug. 50% �ept.—Nov. 0%
012 �arch—May
12 �012 012
13. Actual Emissions ner Pollutant Usted
Attach calculations and documentation of emission factors or other estimation methods used.
Emissions— Emission Control
GHG CAS GHG Estimation Efficiency Emission
Pollutants Pollutants Method Code (Net after Factor Ef Control
(Tons/Year) See instructions all controls
2012
Criteria Emissions— Emission Control
Pollutant Criteria Estimation Efficiency Emission
(NAAQS) Code Ef Control
Pollutants Pollutants Method Code (Net after Factor
(Tons/Year) (See Instructions) all controls)
2012
CO CO 0.13 09
NOx NOx 0.6 09
TSP TSP 0.04 09
PM10 PM10 0.04 09
PM2.5 PM2.5 0.04 09
S02 S02 0.01 09
VOC VOC 0.05 09
HAP/TAP CAS Emissions Emission Control
Pollutants (in HAP/TAPS Estimation EfficiencyEmission EF Control
(see instructions) Method Code Factor
Alphabetical Order) (Pounds/Year) (Net after all controls)
See Instructions
2012
Toluene 108-88-3 0.11 09
11

Facility Total CY 2012 Emissions Summary
Original COPY of RECORD Date Submitted: 6/24/2013 16:28:17
As entered in AERO
Facility Name: Regulator Marine Inc Facility ID :2100073
187 Peanut Drive Permit: 07132
Edenton,NC 27932 County : Chowan
DAQ Region : WARO
North Carolina Department of Environment and Natural Resources
Division of Air Quality
Air Pollutant Point Source Emissions Inventory—Calendar Year 2012
Record Facility—Wide Totals From all Permitted and Non—Permitted Air Pollutant Emission Sources
Green House Gases Pollutants(GHG)
Actual Emissions(Tons/Year)
Pollutant CAS 1 2012 2011 %Difference
Criteria Pollutants
Actual Emissions Tons/Year
Pollutant CAS 2012 2011 %Difference
CO CO 0.13 .15 —13.333339%
NOx NOx 0.6 .66 —9.090909%
PM TSP TSP 0.39 .37 5.4054003%
PM10 PM10 0.39 .37 5.4054003%
PM2.5 PM2.5 0.39 .37 5.4054003%
S02 S02 0.01 Notreported N/A
VOC VOC 25.55 28.52 —10.413749°/a
Hazardous Air Pollutants HAPS and/or Toxic Air Pollutants APs
Actual Emissions(Pounds/Year)
Pollutant CAS 1 2012 1 2011 %Difference
Pollutant Grou :Pol c clic Or anic Matter(Specific Compounds from OA PS for TV Group Sum:0.0
Methylene diphenyl
diisocyanate(MDI) 101-68-8 0.0 Not reported N/A
(Component of POMTV
Benzene 71-43-2 0.0 Notreported N/A
Diethyl aniline N N— 121-69-7 0.0 Notreported N/A
Dimeth l phthalate 131-11-3 5837.0 5702.9 2.351437%
Hexane n— 110-54-3 0.0 Not reported N/A
Methyl ethyl ketone 78-93-3 101.0 Notreported N/A
Methyl methac late 80-62-6 1774.0 3479 —49.008335%
Styrene 100-42-5 42971.0 47200 —8.959745%
Toluene 108-88-3 226.11 166.108 1 36.12228°/u
12

Original COPY of RECORD Date Submitted: 6/24/2013 16:28:17
As entered in AERO
Facility Name: Regulator Marine Inc Facility ID : 2100073
187 Peanut Drive Permit : 07132
Edenton,NC 27932 County : Chowan
DAQ Region : WARO
Comments From Facility:
13

1
AERO Confirmation Email Here

Gary Yoder
From: [e-mail]
Sent: Monday,June 24, 2013 4:28 PM
Subject: Inventory submission confirmation --2100073
Dear Gary Yoder
Your submittal of the 2012 emission inventory for Regulator Marine Inc, 2100073, has been received by the North
Carolina Division of Air Quality(DAQ) on June 24, 2013 at 16:28:17.You have until the due date of the emission
inventory or two weeks from this submittal to review and repudiate the data submitted.
Please remember to:
-print the Certification Form (see AERO Closeout page),
- have the Responsible Official sign it in blue ink,
- include copies of spreadsheets or calculations used in creating this inventory, and
- mail (postmark) it to NCDAQ, 943 Washington Square Mall, Washington, NC 27889 by the required due date in order
for this submittal to be considered complete. If you have any questions, please feel free to contact Betsy Huddleston, in
the Washington Regional Office,at252-946-6481.
The Division of Air Quality thanks you for using AERO,the on line emissions inventory program.
Sincerely
DAQ
1

SUPPORTING EMISSION RATE CALCULATIONS

REGULATOR MARINE,INC.•EDENTON,NC
CY 2012 NORTH CAROLINA AIR EMISSIONS INVENTORY
SUMMARY OF EMISSIONS—PAGE 1 of 2
de minimis
HA 7TAP(lb/yr) VOCs(lb/yr) (lb/yr) Report?
Acetaldehyde[ 0.207 0.207 10 No
Acrolein' 0.025 0.025 10 No
Arsenic' 0.001 N/A 0.01 No
Benzene' 0.25 0.25 10 No
Benzo(a)Pyrenel 5.07E-05 5.07E-05 1 No
Be Ilium' 8.09E-04 N/A 1 No
1,3-Butadiene' 1.05E-02 1.05E-02 1 No
Cadmium[ 8.09E-04 N/A 0.1 No
Chromic Acid(VI)t 8.09E-04 N/A 0.01 No
n,n-Dimeth laniline 22 22 100 No
Dimeth 1 Phthalate 5837 5837 10 Yes
Formaldehyde' 0.053 0.053 10 No
Lead' 0.002 N/A I No
Manganese' 0.002 N/A 10 No
MEK 101 101 100 Yes
Mercury vapor 8.09E-04 N/A 0.001 No
Methyl Methac late(MMA) 1774 1774 1000 Yes
Meth lenedi hen 1 Diisoc ante(MDI) 0.0015 0.0015 10 No
Naphthalene' 0.023 0.023 1 No
Nickel' 8.09E-04 N/A 1 No
PAH' 0.14 0.14 1 No
Selenium' 4.04E-03 N/A 10 No
Styrene 42971 42971 100 Yes
Toluene' 226 226 100 Yes
X lens' 0.19 0.19 100 No
Non HAP/TAP VOC N/A 48 - No
Notes:
1.This total includes the emissions from the peak generator,calculated from the NC spreadsheet.
2.Mesh filter control efficiency per manufacturer.
3.Particulate matter emitted assumed to be the same equivalent diameter.
VOC GRAND TOTAL FROM MATERIAL USE(lb/yr) 50,980
VOC GRAND TOTAL FROM MATERIAL USE(tpy) 25.5
I

REGULATOR MARINE,INC.-EDENTON,NC
CY 2012 NORTH CAROLINA AIR EMISSIONS INVENTORY
SUMMARY OF EMISSIONS—PAGE 2 of 2
PARTICULATE MATER
de minimis
(lb/yr) Report"
Toal Resin and Gel Coat Throughput 504,338 Ib/ r
PM to Filters Q% overs ra ) 5,043 IN
Mesh Filter Control Eff.2 86%
PM/PM10/PM2.5 Emission Rate3 691 lb/yr
PM/PM10/PM2.5 Emission Rate3 0.35 t
Average % by wt.of Cobalt in Materials 2.30%
Cobalt Emission Rate as PM 0.2 lb/ I No
HAP/TAP GRAND TOTAL 50,932 Ib/ r
HAP/TAP GRAND TOTAL 25.47 ton/h r
GREENHOUSE GAS EMISSIONS
de minimis
(lb/yr) Report?
Nitrous Oxide(CO2e) 7.18E-02 ton/yr 1 No
Carbon Dioxide 29 toll/)I 100 No
Methane(CO2e) 2.43E-02 ton/yr I No
CRITERIA POLLUTANTS
de minimis
(lb/yr) Report?
PM 0.38 ton/ - Yes
PM10 0.38 ton/ r - Yes
PM2.5 0.38 ton/ - Yes
CO 0.13 ton/ - Yes
NOX 0.6 ton/ r Yes
SOX 0.01 ton/yr Yes
VOC 25.54 ton/yr Yes

1
GAS&DIESEL INTERNAL COMBUSTION ENGINES EMISSIONS CALCULATOR REVISION R 1=12012.OUTPUT SCREEN
Instructions: Enter emission source/facility data on the"INPUT"leb/screen.The air emission results and summary of Input data are
®� viewed/printed on the"OUTPUT"ubiscreen.The different tabs ere on the bottom of this screen.
This spreadsheet Is for your use only and should be used with caution.DENR does not guarantee the accuracy of the Information contained.
NCDENR This spreadsheet Is subject to continual revision and updating. It Is your responsibility to be aware of the most current Information available.
DENR is not responsible for errors or omissions that may be contained herein.
SOURCEIFACiLff V1 USERINPUT SUMMARY FROM INPUT SCREE *t` ""
FACILITY ID NO.: 2100073
COMPANY. Regulator Marine PERMIT NUMBER: 07132TO9
EMISSION SOURCE DESCRIPTION: 500 HP POWER OUTPUT DIESEL INTERNAL COMBUSTION ENGINE FACILITY CITY: Edenton
EMISSION SOURCE ID NO.: 14 FACILITY COUNTY: Chowan
SPREADSHEET PREPARED BY: GTV POLLUTANT CONTROL EFF.
ACTUAL THROUGHPUT 77 HRS OF OPERATION UE:FUEL HEATING VAL 140000 BTU/GAL PM 0
REQUESTED ANNUAL LIMITATION 28,000 GALS COMBUSTED I CALCULATION&I 0.1381 mm BTU/GAL PM10 0
SULFUR CONTENT OF DIESEL FUEL 1 01 PM2.5 0
METHOD USED TO COMPUTE ACTUAL GHG EMISSIONS: TIER 1: DEFAULT HIGH HEAT VALUE AND DEFAULT EF S02 0
CARBON CONTENT USED FOR GHGS C/al: CARBON CONTENT NOT USED FOR CALCULATION TIER CHOSEN NOX 0
CO 0
VOC 0
CRrrERIA AIR POLLUTANT EMISSIONS INFORMATION
ACTUAL EMISSIONS L POTEN ALEM6SIDN9 EMOSM FACTOrr
u.T1,, of Cbrt9Cl5lMeT51 Ian..O ncul AY,n bl,phr
AIR POLLUTANT EMITTED INTro� as ton r b/hr Ions/r r tonsfy, Iu„ImYaYe
PARTICULATE MATTER PM 1.10 0.04 1.10 1 4.82 1.10 0.62 2.20E-03
PARTICULATE MATTERd 0 MICRONS(PM,a) 1.10 0.04 1.10 4.82 1.10 0.62 2.20E-03
PARTICULATE MATTER4.5 MICRONS(PMzA) 1.10 0.04 1.10 4.82 1.10 0.82 2.20E-03
SULFUR DIOXIDE(S021 0.20 0.01 LO.20 0.89 0.20 0.11 4.05E-04
NITROGEN OXIDES NOs 15.50 0.60 67.89CARBON MONOXIDE CO 3.34 0.13 14.63VOLATILE ORGANIC COMPOUNDS VOC 126 0.05 1 5.51 1.26 1 0.70 1 2.51 E 03
TOXICIHAZARDUI SAM�Ul Age TRW
ACTUAL EMISSIONS POTENTIAL EMISSIONS Elil IO FACTOR
CAS xrTel,ccwTsus ours, ,Mrge CpQMs uNTs rrEw LWTB>S ohp-,v
TOXIC/HAZARDOUS AIR POLLUTANT NUMBER WILT r 14.13E.033.62E+01
in I r bR,r IW unwaaaeen
Acelaldeh a H, 75070 2.68E 03 2.07E-01 E-03 2.35E+01 2.68E-03 3.01 E.00 5.37 -06
Acroleln H, 107028 3.24E-04 2.49E-02 E-Od 2.84E.W 3.24E-04 3.fi3E-01 6.48E-07
Arsenic unYatedc H, ASC-0Other 1.10E-05 1.08E-03 E-OS 123E-01 1.40E-05 1.57E-02 2.80E-0B
Benzene H, 71432 3.27E-03 2.51E-01 E-03 2.88E+01 3.27E-03 3.66E+00 6.53E-06
8enzo a race H, 50328 6.58E07 5.07E-05 E-07 5.76E-03 6.50E-07 7.37E-00 1.32E-09
Beryllium metal unreacted H, 7440417 1.05E05 8.09E-04 E-OS 920E-02 1.05E-05 1.18E-02 2.10E-08
1,3-Butatliene H, 106990 7.37E-04 1.05E-02 E-04 1.20E.00 1.37E-04 1.53E01 2.74E-07
Cadmium metal elemental unreacled H 7440439 1.05E-05 8.09E-04 E-05 9.20E-02 1.05E-05 1.18E-02 2.10E-08
Chromic Acid VI H, 7738945 1.05E-05 8.09E-04 E-05 9.20E-02 1.05E-05 1.18E-02 2.10E-08
Formaldehyde H, 50000 4.13E-03 3.18E-01 3E.03 3.62E+01 4.13E.03 4.63E+00 8.26E-06
Lead unlisted c unds H PBC-Other 3.15E-05 2.43E-03 5E.05 2.76E-01 3.15E.05 3.53E-02 6.30E-0B
Ma anese unlisted co nds H, MNC-Other 2.10E-05 1.62E-03 0E-05 1.84E-01 2.10E-05 2.35E-02 4.20E-08
Mercu v r H, 7439976 1.05E 05 8.09E-04 5E.05 920E-02 1.05E-05 1.18E-02 2.10E-08
N lhalene H 91203 2.97ED4 2.29E-02 7E-04 2.60E+00 2.97E-04 3.32E-01 5.94E-07
Nickel metal H, 7440020 1.05E 05 8.09E-04 5E-05 920E-02 1.05E-05 1.18E-02 2.10E-08
Selenium nds H SEC 5.25E 05 4.04E-03 5E.05 4.60E-01 5.25E-05 5.88E-02 1.05E-07
Toluene H 108883 1.43E-03 1.10E-01 3E-03 1.25E+01 1.43E+03 1.60E.00 2.88E-06
X lens H,T 1330207 9.96E-04 7.68E-02 8E-04 8.74E+00 9.98E-04 1.12E.00 2.00E-06
Highest HAP(Formaldehyde) 50000 4.13E-03 3.18E-01 4.13E-03 3.62E.01 4.13E 03 4.63E.00 8.26E-06
Total HAPs 1.34E-02 1 03E+00 1.34E-02 1.18E+02 1.34E02 1.51E+01
TOXICA/R POLLUTANT EMISSIONS INFORMATION FOR PERAIFTINO PURPOSES
EXPECTED ACTUAL EMISSIONS AFTER CONTROLS I LIMITATIONS EussoN FACTOR
Whp N
TOXIC AIR POLLUTANT CAS Num. Ib/hr IWday btyr uncontrolled
Acetaldehyde(H, 75070 2.6BE-03 6.44E-02 3.01E+00 5.37E-06
Acr0lsin H, 107028 3.24E-04 7.77E-03 3.63E-01 6.48E-07
Arsenic unlleled co ride H ASC-Other 1.40E-05 3.36E.04 1.57E-02 2.80E-08
Benzene H, 71432 3.27E-03 7.84E.02 3.66E+00 6.53E.06
8enzo a ens H, 50328 6.58E-07 1.58E-05 7.37E-04 1.32E-09
Beryllium metal unreacted Ei 7440417 1.05E-05 2.52E-04 1.18E-02 2.10E-08
1,3-Buladlene H, 106990 1.37E-04 3.28E-03 1.53E-01 2.74E.07
Cadmium metal elemental unreacted H 7440439 1.05E-05 2.52E-04 1.18E-02 2.10E-08
soluble chromate compounds.as chromium VIequivalent SOLCR6 1.05E-05 2.52E-04 1.18E-02 2.10E-08
Formaldehyde H,T 50000 4.13E-03 9.91E-02 4.83E+00 8.26E-06
Manganese unlisted Compounds H, MNG-0Nin 2.10E.05 5.04E-04 2.35E-02 4.20E-08
Mercuryvapor H, 7639976 1.05E05 2.52E-04 1.18E-02 2.10E-0B
Nickel metal H, 7440020 1.05E 05 2.52E 04 1.18E-02 2.10E-08
Toluene HT) 108883 1.43E 03 344E-02 1.60E.00 2.86E-06
X iene(HT 11330207 9.98E-04 1 2.39E-02 , t2E.00 200E-06
GREENHOUSE GAS EMISSIONS INFORMATION(FOR EARSSIONS INVENTORY PURPOSES)-CONSISTENT WITH EPA ONO-POTENTIAL TO
MANDATORYREPORTBIG RULE(MRR)METHOD NOT BASED ONEPA MRRPOTENTIAL EM16blUnlb AM
DISTILLATE p2 ACTUAL EMISSIONS POTENTIAL EMISSIONS-utilize max has input Rearrested Emission Limitalion-Wlize
capacity or horsepower and EPA MRR Emission requested fuel limit and EPA MRR
GREENHOUSE GAS EMITTED WILL NOT USE EPA MRR METHOD IF ONLY HOURS OF OPERATION ARE GIVEN Factors Emission Factors
metric tonshir metre lonstyr,CO2e short Ions/r short Ions/r short tons)r,CO29 shod loni short ton CO2o
CARBON DIOXIDE(COO no EPA method no EPA method no EPA method 2.499.61 2,499.61 319.59 319.59
METHANE(CH.) no EPA method no EPA method no EPA method 1.01E-01 2.13E.00 1.28E-02 2.68E.01
NITROUS OXIDE(Nz0) no EPA method no EPA melhod rho EPA method 2.03E-02 6.29E+00 2.56E-03 7.92E-01
TOTAL no EPA method TOTAL 2,508.013 TOTAL 320.55
NOTE:CO2s means CO2 equivalent.
NOTE:The DAD Air Emissions Reporting Online(AERO)system requires short Ions be reported. The EPA MRR requires metric tons be reported.
NOTE: Do not use greenhouse gas emission estimates from this spreadsheet for PSD(Prevention of Significant Delerioraliun)purposes.

January 2012 Emissions Regulator Marine,Inc.,Edenton,NC
Miwc0aneouS Material Usagc Emission Rates
Ja 12 Dimeehyl Non-Hat
Material Descriptions Usage Styrene Toluene Xylene MEK Mot MMA Aniline VOC Total VOC
(Ibs) (Ili/no) (lb/.) (Idmo) (Ib/mo) (Ilit.) Uwnw) (lh/mo) (Rslmo) (Ibhw)
POLY-BOND B39R Adhesive 3748.80 914.7 0.0 0.0 0.0 0.0 0.0 0.0 0.0 914.7
POLY-BOND B46F Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
CORE BOND Adhesive 167.40 52.9 0.0 0.0 0.0 0.0 0.0 0.0 0.0 57-9
CONTACTCEMENT Glue 0.00 0.0 0.0 0.0 0.0 0.0 no 0.0 OA 0.0
DURATE-C GREY SIC PRIMER Tooling surfacing prime, 0.00 OA 0.0 OA 0.0 0.0 0.0 0.0 OA 0.0
ZYVAX Sfc classier 28.19 0.0 14.1 0.0 14.1 0.0 0.0 0.0 0.0 28.2
MARBOCOAT Mold Release agent 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
OSCARS Mold Release agent 0.00 0.0 0.0 OA 0.0 0.0 0.0 0.0 0.0 0.0
PROPATCH ADDITIVE Parch 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
MMA(EA,) Puny 1326 0.0 0.0 0.0 0.0 0.0 8.6 0.0 0.0 9.6
MOLDREJEASE Mold Release 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DIVALErTE Putty 162.63 65.1 0.0 0.0 0.0 0.0 0.0 1.6 0.0 66.7
FV STYRENE Styrene 0.00 0.0 0.0 OA 0.0 0.0 0.0 0.0 0.0 0.0
GL Wax Wax 0.00 0.0 0.0 0.0 0.0 0.0 no 0.0 0.0 0.0
Partall Film 610 Polyvinyl Alcohol Cortu 0.00 0.0 0.0 0.0 0.0 0.0 0A 0.0 0.0 0.0
Sea Grip 500D Adhesive 0.00 0.0 no 0.0 0.0 0.0 0.0 0.0 0.0 0.0
eco4..90.1 7 and SP Foam Foam 3694.00 0.0 0.0 0.0 0.0 0.00077 0.0 0.0 0.0 0.0
Axel XTEND S-19C Mold Sealer 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Light Gray EZ Sanding Prnrcr Printer 0.00 0.0 ao 0.0 0.0 0.0 no 0.0 0.0 0.0
Tomb: 7804J 1032.7 1L/ ago 1&1 0.0 6.6 1.6 0.0 1071.1 Told VOC Misc.Materials
AM Hour/Day 12
AM Days/Mo 20
Act Hour/Mo 240
Rcsin and Cscicoar Us iec
Jan.12 Styrene Memacrylate MEK Dimethyl Phthalate
Usage Embalm E.mbolan FAUbmion Emission
Material Name Description (RJmo) (%by at) Factor (INmo) (%by vet) Factor (Remo) (%by wt) Factor (Ib/mo) (%by wt) Factor (Rymo)
Nomx MEK-9 Red Resin Catalyst 544.0 2-00 5.00 0.5 60 100.0 326.4
Nomx MEK.9 Resin Catalyst 96.0 2.00 5.00 0.1 60 100A 57.6
POLYLTTE TLP 33234-38 Resin 40060.0 31.5 11.9 1501.6
NIN 71500INF-12 Resin 500.0 50.0 11.9 29.8
LG-331E-2494 Flag Blue Gel Coat 400.0 29.3 50.4 59.1 2.8 78.6 8.9
970-XJ-037 Paehald Gel Coat 16.0 57A 50.4 4.6 0.0 78.6 0.0
WG-LE`2452 Regulator While Gel Coat 44W.0 25.3 50.4 560.4 3.0 79.6 103.4
WG-I1-2452 WH INT Gel Coat 350.0 27-8 50.4 63.1 0.0 78.6 0.0
VPRO-W0013 White garner Coat Gel Coat I10D.0 30.3 50.4 168.1 0.0 79.6 0.0
LG-33LE-4152 Carolina Blue Gel Coat 150.0 28.6 50.4 21.6 28 78.6 3.2
GG-LE-1878 Italian Sea Fusion Gel Coat 15D.0 25.2 50.4 19.0 3.0 78.6 3.5
LG-33LE-4155 Stars&Stripes Gel Coat 100.0 292 50.4 14.7 2.8 78.6 2.2
YG-LE-2001 Fighting lady Gel Coat 100.0 25.0 50.4 12.6 3.0 78.6 23
Tomb: 245L7 123.6 0.6 394.0
2962.9 Total VOC Resin and Gel Caatr,
4034.0 West,VOC Grand Total(Resins,Gel Cann.Foaar,and Mur.Mat)
2.0 tans0 re VOC Grand Taal
47526.0 /Mao Total Resin and GC Usage

February 2012 Emissions Regulator Marine,Inc.,Edenton,NC
Miscellaneous Material Usage Emission Rates
Feb-12 Dimelhvt Non.IW
Material Description Usage Styrene Tolmne Xylem MEK MDI MMA Aniline VOC lotnl VOC
(Ind) (INmo) (Nn a) 0b/mul (lb/mo) (Nmo) ob/m.l (INmo) (Ilat.)
POLY-BOND B39R Adhesive 2811.60 686.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 686.0
POLY-BOND B46F Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
COREBOND Adhesive 167.40 52.9 0.0 0.0 0.0 0.0 0.0 0.0 0.0 52.9
CONTACT CEMENT Glue 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DURATEC GREY SIC PRIMER Tooling surfacin 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
ZYVAX Sfc cleaner 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
MARBOCOAT Mold Release at 14ot 0.0 11.2 0.0 0.0 0.0 0.0 0.0 2.8 14.0
OSCARS Mold Release at 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
PROPATCH ADDITIVE Patch 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
MMA(EA.) Putty 26.52 0.0 0.0 0.0 OA 0.0 172 0.0 0.0 172
MOLD RELEASE Mold Release 0.00 0.0 OA 0.0 0.0 0.0 0.0 0.0 0.0 OA
DIVALETIE Putty 243.95 97.6 0.0 0.0 0.0 0.0 0.0 2.4 0.0 100.0
FV STYRENE Styrene 0.00 0.0 0.0 0.0 0.0 0.0 01) 0.0 0.0 0.0
GL Was Was 0.00 0.0 0.0 no 0.0 0.0 0.0 0.0 0.0 0.0
Penal!Film 810 Polyvinyl Akob 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Sea Grip 5000 Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
mo4-90-1.7 and SP Foam Foam 0.00 0.0 0.0 0.0 0.0 0.00000 0.0 0.0 0.0 0.0
Axel XTEND S-19C Mold Sealer 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
L&Gray EZ Sanding Primer Primer 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Tom&: 3263.5 M5 772 ads 0.0 as 172 2.4 28 8782 rural VOC Misc.Materials
Act.Hour/Day 12
AM Days(Mo 20
AM Hour/Mo 240
Resin and Gelcoat Usage
Feb-12 Styrene MethaMlate MEK Dimelhyl Phthalate
Usage Emission Emission Erniodon Emission
Material Name Descrpton (201110) 11:by wtl Factnr tlh/mol t by w11 Factor (lb/mo) (%by WO Factor (Rmo) (%by ,$) Factor (11W.)
Noma MEK-9 Red Resin Catalyst 480.0 2,00 5.00 0.5 60 100.0 288.0
Norm MEK-9 Resin Catalyst 128.0 2.00 5.00 0.1 60 100.0 76.8
POLYI3TE TIP 33234-38 Resin 40160.0 31.5 11.9 1505.4
NLN 71500 INF-12 Resin 500.0 50.0 11.9 29.8
LG-33LE-2494 Flag Blue Get Coat 400.0 29.3 50.4 59.1 2.8 78.6 8.9
NG-3313E-4632 Moon Dust Get Cow 150.0 28A 50.4 21.5 3.0 78.6 3.5
WG-LE-2452 Regulator White Get Coat 4400.0 25.3 50.4 560.4 3.0 78.6 103.4
WG-11-2452 WH INT Get Coat 550.0 22.8 50.4 63.1 0.0 78.6 0.0
VPRO-WO013 White Barrier Cow Get Coat 1100.0 30.3 50.4 168.1 0.0 78.6 0.0
LG-33LE-4152 Carolina Blue Get Caaz 150.0 28.6 50.4 21.6 28 78.6 32
GG-LE-1878 Italian Sea I. Gel Cow 150.0 25.2 50.4 19.0 3.0 78.6 3.5
LG-33LE-4155 Stars&Stripm Get Coat 100.0 29.2 50.4 14.7 2.8 78.6 22
Tofou: 24617 124.8 0.6 364.8
2952.9 Told VOC Resin and Gel Coact
3823.1 16/mo VOC Grand Total(Resins,Gel Coals,Foam,and Misc.Mal.)
1.9 tons/..VOC Grand Total
47660.0 I6/mo Told Resin and GC Usage

March 2012 Emissions Regulator Marine,Inc.,Edenton,NC
Miscellaneous Material Usage Emission Rates
Mar-12 Dimethyl Non-Haa
Material Description Usage Sivrene Toluene Xylem MEK MDI MMA AdBne VOC Total VOC
(lbs) (Ib/mo) (INmo) (lb/no) (Ibhno) (lb/=) (INmo) (Iwmo) (Iblmo) ONmo)
POLY-BOND B39R Adhesive 4217.40 1029.0 0.0 n n ao 0.0 0.0 0.0 0.0 1029.0
POLY-BOND B46F Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
CORE BOND Adhesive 111.60 35.3 0.0 0.0 0.0 0.0 0.0 0.0 0.0 353
CONTACTCEMENT Glue 0.00 0.0 0.0 OA 0.0 0.0 0.0 0.0 0.0 OA
DURATEC GREY SFC PRIMER Tooling surfaci 0.00 0.0 0.0 0.0 0.0 0.0 0.0 OA 0.0 0.0
ZYVAX Sic cleaner 0.00 0.0 0.0 0.0 0.0 OA 0.0 0.0 0.0 0.0
MARBOCOAT Mold Releasea 14.01 0.0 112 0.0 0.0 0.0 0.0 0.0 2.8 14.0
OSCARS Mold Release a 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
PROPATCH ADDMVE Patch 48.00 26.4 0.0 0.0 0.0 0.0 0.0 0.0 0.0 26.4
MMA(EA.) Putty 79.56 0.0 0.0 0.0 OA 0.0 51.7 0.0 0.0 51.7
MOLD RELEASE Mold Release 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DIVALETTE Puny 162.63 65.1 0.0 0.0 0.0 0.0 0.0 1.6 0.0 66.7
FV STYRENE Styrene 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
GL Was Wax 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Partall Film#10 Polyvinyl Alcot 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Sea Grip 5000 Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
eco4-90-1.7 and SP Foam Foam 0.00 0.0 0.0 0.0 0.0 0.00000 0.0 0.0 0.0 0.0
Axel XTEND S-19C Mold Sealer 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Light Gray EZ Sanding Primer Primer 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Totals: 4633.1 115S.7 112 a00 a0 0.0 S1.7 1.6 2.8 1223.1 Toad VOC Misc.Materials
Act.Horw/Day 12
Act Days/Mo 22
Act Hour/Mo 264
Resin and Gelcoat Usage
Mar-12 Styrene Methacrylate MEK Dimethyl Phthalate
Usage Emission Emission Fadsahm Emission
Material Name Description (lb/ma) (%by wt) Factor (lbmw) (%by M) Factor (Iblmo) (%by wt) Factor (Ibdrm) (%by wO Factor (lb/mo)
Nomx MEK-9 Red Resin Catalyst 672.0 2.00 5.00 0.7 60 100.0 403.2
Notts MEK-9 Resin Catalyst 724.0 2.00 5.00 0.2 60 100.0 134A
NLN 71500 INF-12 Resin 1650.0 50.0 11.9 98.2
LG-33LE-2494 Flag Blue Gel Coat 250.0 29.3 50.4 37.0 2.8 78.6 5.6
NG-33LE-4632 Moon Dust Gel Coat 100.0 28.4 50.4 143 3.0 78.6 23
WG-LE-2452 Regulator White Gel Coat 2750.0 253 50.4 350.2 3.0 78.6 64.6
WG-I1-2452 WH INT Gel Coat 11010 22.8 50A 1262 0.0 78.6 0.0
VPRO-WO013 White Barrier Coat Gel Coat 2750.0 303 50.4 420.2 0.0 78.6 0.0
LG-33LE-4152 Carolina Blue Gel Coat 150.0 28.6 50.4 21.6 2.8 78.6 3.2
WG-lE4500 Blue Tone White Gel Coat 250.0 253 50.4 31.8 3.0 78.6 5.9
Tomb: 1099.6 81.7 0.9 .537.6
1719.8 Total VOC Resin and Gel Coat
2942.9 lblmo VOC Grand Told(Resins,Gel Coat;Foam,and Misc.Mat)
1.5 tosrs/mo VOC Grand Total
9000.0 lb/no Total Resin and GC Usage

April 2012 Emissions Regulator Marine,Inc.,Edenton,NC
Miscellaneous Material Usaw Emission Rates
Apr•12 Dimethyl Nom-Hat,
Material Description Usage Syrme Toluene Xylene MEK MDI MMA Aniline VOC Total VOC
(lbs) (IAhae) (INmo) (lb/me) (Ibhne) (Iblmo) (lb/mo) (lb(m) (INmo) (Ibtme)
POLY-BOND B39R Adhesive 5154.60 1257.7 0.0 0.0 0.0 0.0 0.0 0.0 0.0 1257.7
POLY-BOND B46F Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
CORE BOND Adhesive 223.20 70.5 0.0 0.0 0.0 0.0 0.0 0.0 0.0 703
CONTACTCEMENT Glue 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DURATEC GREY SFC PRIMER Tooling surface 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
ZYVAX Sic cleaner 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
MARBOCOAT Mold Release a; 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
OSCARS Mold Release a; 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
PROPATCH ADDnWE Patch 40.00 22.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 22.0
MMA(FA) Puny 26.52 0.0 0.0 0.0 0.0 0.0 17.2 0.0 0.0 17.2
MOLD RELEASE Mold Release 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DIVALET E Puffy 216.94 86.7 0.0 0.0 0.0 0.0 0.0 22 0.0 88.9
FV STYRENE Styrene 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
GIL Wax Wax 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
PartaO Film 010 Polyvinyl Akoh 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Sea Clip 5000 Adhesve 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
eco4-90-1.7 and SP Foam Foam 3677.00 0.0 0.0 0.0 0.0 0.00D77 0.0 0.0 0.0 0.0
Axel XTEND S-19C Mold Seiler 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Light Cray EZ Sanding Primer Pruner 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Totals: 933&2 1437.0 &0 a00 0.0 0.0 17.2 22 0.0 145G4 Toad VOC Musa Materiah
AcL HourfDay 12
Act.Days/Mo 22
Act.Hour/Mo 264
Resin and Gcicoat Usaec
Apr-12 Styrene Methacrylate MEK Dimethvi Phthalate
Usage Emission Emission Emission Emission
Material Name Description (Ihtmo) (%by tell Factor (lb/mo) (%by M) Factor (INmo) (%by tet) Factor (INmo) (%by tee) Factor (INmo)
Norox MEK-9 Red Resin Camlyst 960.0 2.00 5.00 I.0 60 100.0 576.0
Nomx MEK-9 Resin Ca ilyst 320.0 2.00 5.00 0.3 60 100.0 192.0
NIIN 71500 DIF-12 Resin 2250.0 50.0 11.9 133.9
POLYIITE T1P 33234-39 Resin 40920.0 31.5 11.9 1533.9
LG33IE-2494 Flag Blue Gel Coat 360.0 29.3 50.4 53.2 2.8 78.6 8.0
NG-33LE-4632 Moron Dust Gel Coat 180.0 28.4 50.4 25.8 3.0 78.6 4.2
WG-E-2452 Regulator Whim Gel Coo 4000.0 25.3 50.4 509.4 3.0 78.6 94.0
WCr11-2452 WH INT Gel Cost 2000.0 22.8 50.4 229.5 0.0 78.6 0.0
VPRO-WOO13 White Barrier Coat Gel Coat 2000.0 30.3 50.4 305.6 0.0 78.6 0.0
LG331E-4152 Carolina Blue Gel Coat 190.0 28.6 50.4 27.4 2.8 78.6 4.1
WGIE-4500 BNB Tom White Gel CM 135.0 25.3 50.4 17.2 3.0 78.6 3.2
RG33LE-20D3 Stadia Red Gel Com 135.0 27.7 50.4 18.8 2.7 78.6 2.8
TaYh: 2854.7 116.4 1.3 768.0
3740.4 Toad VOC Resin and Gel Coats
5196.8 0ywo VOC Grad Toad(Rest=,Csrt Coro,Foam,and Mite.Max)
2.6 masAno VOC Grand Total
52170.0 0/mo Total Resin and GC Usage

May 2012 Emissions Regulator Marine,Inc.,Edenton,NC
Miscellaneous Material Usaw Emission Rates
May.12 Dimethyl Non-Has
Material Description Usage Styrene Toluene Xylene MEK MD1 MMA Aniline VOC Total VOW
(lbs) (IWmo) (Ih(mo) (IWmo) (IWmo) (Ihhno) (Maio) (IWmo) (IWmo) (Ih/mo)
POLY-BOND B39R Adhesive 5623.20 1372.1 0.0 0.0 0.0 0.0 0.0 0.0 0.0 1372.1
POLY-BOND B46F Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
CORE BOND Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
CONTACT CEMENT Glue 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DURATEC GREY SFC PRIMER Tooling surface 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
ZYVAX Sir cleaner 14.09 0.0 7.0 0.0 7.0 0.0 0.0 0.0 0.0 14.1
MARBOCOAT Mold Release a; 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.o 0.0
OSCARS Mold Release a; BAD 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
PROPATCH ADDII7VE Patch g.OD 4.4 0.0 0.0 0.0 0.0 0.0 0.0 0.0 4.4
MMA(EA.) Putty 26.52 0.0 0.0 0.0 0.0 0.0 17.2 0.0 0.0 17.2
MOLD RELEASE Mold Release O.OD 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DIVALETTE Putty 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
FV STYRENE Stymnc 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
G L Wax Wax 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
ParmU Fdm 810 Polyvinyl Aleah aOO 0.0 0.0 0.0 0.0 0.0 0.0 0.0 &0 0.0
Sea Grip 5" Adhesive O.OD 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
eco4-90-1.7 and SP Foam Foam 0.00 0.0 0.0 0.0 0.0 0.00000 QO 0.0 0.0 0.0
Axel XTEND S-19C Mold Sealer 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Light Gay EZ Sanding Printer Printer 47.14 7.8 0.0 0.1 0.0 0.0 0.0 0.0 14.2 22.2
Torah: 5719.0 1384.2 7.0 R12 7.0 0.0 17.2 0.0 14.2 1429.9 Total VOC Mitc.Materials
Act Hour/Day 12
AcL DaystMo 22
Act.Hour/Mo 264
Resin and Gelcoat Usaec
May-12 Slysene Melhacrylate MEK Dimethyl Phthalate
Usage Emission Emission Emission Emission
Material Name Description (IWmo) (%by wt) Factor (IWmo) (%by wl) Factor (IWmo) (%by sit) Factor (IWmo) (%by w0 Factor (IWmo)
Notes MEK-9 Red Resin Catalyst 768.0 2.00 5.00 0.8 60 100.0 460.8
Nomx MEK-9 Resin Catalyst 256.0 2.00 5.00 0.3 60 100.0 153.6
NLN 71500 INS 12 Resin 1800.0 50.0 11.9 107.1
POLYIIIE TIP 33234-38 Resit 40940.0 313 11.9 1534.6
L&33LE-2494 Hag Blue Gel Coat 585.0 29.3 50A 86.5 2.8 78.6 13.1
NG33LE4632 Moon Dust Gel Coal 90.0 28.4 50.4 12.9 3.0 78.6 2.1
WGLE-2452 Regulator Whim Gel coat 3600.0 25.3 50.4 458.5 3.0 78.6 94.6
VPRO-WO013 Whie Barrier Coat Gel Coal I50D.0 30.3 50.4 229.2 0.0 78.6 0.0
LG331E-4152 Carolina Blue Gel Coal 360.0 28.6 50.4 51.9 2.8 78.6 7.8
Toss6: 2490.7 107.6 1.0 614.4
3203.7 Tad VOC Resin and Gel Coats
4633.6 l6Ano VOC Grind Total(Resins,Gel Coats,Foam,and Mix.Mat)
2.3 mns/mn VOC Grand Told
48875.0 Ib/mo Total Resin and GC Usage

June 2012 Emissions Regulator Marine,Inc.,Edenton,NC
Miscellaneous Material Usage Embalm Rates
Jm-l2 Dimethyl Moo-Hez
Material Descriptim Usage slyrene Toluene Xytene VIER Mill MMA Aniline VOC Total VOC
(lbs) (Ih/mo) (IWmo) (IWmo) (Ibmo) Wine) (ihnmo) (INmo) (IWmo) (IWmo)
POLY-BOND B39R Adhesive 5154.60 1257.7 0.0 0.0 0.0 0.0 0.0 0.0 0.0 1257.7
POLY-BOND B46F Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
CORE BOND Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
CONTACT CEMENT Glue 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DURATEC GREY SFC PRIMER Tooling surfacm 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
ZYVAX Sfc cleaner 14.09 0.0 7.0 0.0 7.0 0.0 0.0 0.0 0.0 14.1
MARBOCOAT Moll Release al 14.01 0.0 11.2 0.0 0.0 0.0 0.0 0.0 2.8 14.0
OSCARS Mold Release a; 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
PROPATCH ADDITIVE Patch 24.00 13.2 0.0 0.0 0.0 0.0 0.0 0.0 0.0 13.2
MMA(EA) Putty 26.52 0.0 0.0 0.0 0.0 0.0 17.2 0.0 0.0 17.2
MOLD RELEASE Mold Release 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DIVAIETTE Putty 135.53 54.2 0.0 0.0 0.0 0.0 0.0 1.4 0.0 55.6
FV STYRENE Styrene 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
GL Wax Wax 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Psrtall Film 810 Polyvinyl A1coh 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Sea Gnp 5000 Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
eca4-90-1.7 and SP Foam Foam 0.00 0.0 0.0 0.0 0.0 0.00000 0.0 0.0 0.0 0.0
Axel XTEND S-19C Mold Sealer 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Light Gray EZ Sanding Primer Printer 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Tomb. 5368.8 1325J 18.3 0.00 7.0 0.0 17-2 1.4 Z8 1371.8 Tool VOC Mac Materials
Act.Hour/Day 12
Act.Days/Mo 22
Act.Hour/Mo 264
Resin and Gelcoat Usage
Jun-12 9"- Methacrylate MEK Dimethyl Phthalate
Osage Bradenton Emission Emission Emission
Material Name Description (IWmo) (%byM) Factor (lbmo) (%by wt) Factor (Ibuo) I%by wt) Factor (Ibhne) (%by wt) Factor (Ibmo)
Norox MEK-9 Red Resin Catalyst 768.0 2.t10 5.00 0.8 60 100.0 460.8
Nomx MEK-9 Resin Catalyst 256.0 2.00 5.00 0.3 60 100.0 153.6
NLN 715006JF-12 Resin 904.0 50.0 11.9 53.8
POLYLJTE T1P 33234-38 Resin 40260.0 31.5 11.9 1509.1
L.G33LE-2494 Flag Blue Gel Coat 270.0 29.3 50.4 39.9 2.8 78.6 6.0
NG33LE-4632 Moon Dust Gel Coat 180.0 28.4 50.4 25.8 3.0 78.6 4.2
WGLE-2452 Regulator White Gel Coat 4700.0 25.3 50.4 598.6 3.0 78.6 110.5
VPRO-WO013 White Barrier Coat Gel Cost 2039.0 30.3 50.4 311.6 0.0 78.6 0.0
YO-LE-2001 Fighting lady Gel Coat 90.0 25.0 50.4 11.3 3A 78.6 2.1
WGII-2452 WH 1NT Get Com 2694.0 22.8 50.4 309.2 0.0 78.6 0.0
Tomb. 2550.1 122.8 1.0 614.4
3288.3 Total VOC Resin and Gel Coma
4660.2 16/mo VOC Grand Total(Resins,Gel Coats,Foam,and Miss.Mot.)
2.3 mm/mo VOC Grand Total
51137.0 Ib/mo Told Resin and GC Usage

July 2012 Emissions Regulator Marine,Inc.,Edenton,NC
Miscellaneous Material Usaec Emission Rates
3W-12 Dimethyl Non-Haz
Material Descriptions Uage Styrene Toluene Xylene MEK MDI MMA An(lios VOC Total VO4C
ohs) ([Wmo) (INmo) (INmo) (INmo) (lbhoo) (INmo) (IWmo) (IWmo) (lb(mo)
POLY-BOND B39R Adhesive 5154.60 1257.7 0.0 0.0 0.0 0.0 0.0 0.0 0.0 1257.7
POLY-BOND B46F Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
CORE BOND Adhesive 55.90 17.6 0.0 0.0 0.0 0.0 0.0 0.0 0.0 17.6
CONTACTCEMENT Glue 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DURATEC GREY SFC PRIMER Tooling surfacin 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
ZYVAX Ste cleaner 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
MARBOCOAT Mold Release a; 14.01 0.0 11.2 0.0 0.0 0.0 0.0 0.0 2.8 14.0
OSCARS Mold Release a; 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
PROPATCH ADDITIVE Patch 32.00 17.6 0.0 0.0 0.0 0.0 0.0 0.0 0.0 17.6
MMA(EA,) Puny 13.26 0.0 0.0 0.0 0.0 0.0 8.6 0.0 0.0 8.6
MOLD RELEASE Mold Release 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DIVAIETTE Putty 162.63 65.1 0.0 0.0 0.0 0.0 0.0 1.6 0.0 66.7
FV STYRENE Styrene 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
GL Wax Wax 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Partan Film'010 Polymyl Aleoh 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Sea Grip 5000 Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
mo4-90-1.7 and SP Foam Foam 3678.00 0.0 0.0 0.0 0.0 0.00000 0.0 0.0 0.0 0.0
Axel XTEND S-19C Mold Sealer 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Light Cray EZ Sanding Primer Pruner 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Tomb: 911&3 135&0 11.2 &00 0.0 0.0 8.6 1.6 28 IMZ2 Total VOC Ma%Ma4rriale
AcL Hour/Day 12
Act Days/Mo 17
Act.Hour/Mo 204
Resin and r Irnat I I w
Jul-12 Styrene Methacrylate MEK Dimethyl Phthalate
Usage Rmiexion Emisclan Emission Emission
Material Name Description (lh(mo) (%by wt) Factor (Ilrlmo) by M) Factor (ib/mo) (%byw1) Factor (lNmo) (%by w0 Factor (lNmo)
Norox MEK-9 Red Resin Catalyst 576.0 'W 5.00 0.6 60 100.0 345.E
Nomx MEK-9 Resin Catalyst 96.0 1-.00 5.00 0.1 60 100.0 57.6
NLN 71500 INF-12 Resin 1808.0 30.0 11.9 107.6
POLYI3TE TIP 33234-39 Resin 40500.0 31.5 11.9 1518.1
LGC 33LE-2494 Flag Blue Gel Coat 450.0 29.3 30.4 66.5 2.8 78.6 10.0
(.G33LE-4155 Stars&Stripes Gel Coat 90.0 29.2 50.4 13.2 2.8 78.6 2.0
WG IE41452 Regulator White Gel Coat 8159.0 25.3 50.4 1039.1 3.0 78.6 191.7
VPRO-WOO13 White Barrier Coal Gel Coal 2092.0 30.3 50.4 319.7 0.0 78.6 0.0
IL.33(E-4152 Carolina Bhre Cs1 Coal 270.0 28.6 50.4 38.9 2.8 78.6 5.8
AG(EI-R7047A Teiegrey Gel Coat 180.0 29.5 50.4 26.7 2.8 78.6 4.0
Tomb: 3103.2 209.6 0.7 403.1
3716.7 ToW VOC Resin and Get Coos
5098.9 Ibhno VOC Grand Total(Resins,Get Comes,Foam,and Misr.Mot)
2.5 mnshno VOC Grand Total
53549.0 0i/mo Total Resin and GC Usage
it

August 2012 Emssions Regulator Marine,Inc.,Edenton,NC
Mis llancous Material Usage Entamun Rates
Aug-12 DimelhYl Non-Haz
Material Description Usage Styrene Toluene Xylene MEK Mot MMA Aniline VOC Total VOC
(lbs) (lame) obtain) (Ibhno) (lame) (lamo) (Iamo) (hate) (name) (lb/mo)
POLY-BOND B39R Adhesiw 6091.80 1496.4 0.0 0.0 0.0 0.0 0.0 0A 0.0 1486.4
POLY-BOND B46F Adhesiw 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
CORE BOND Adhesiw 251.10 79.3 0.0 0.0 0.0 0.0 0.0 0.0 0.0 79.3
CONTACT CEMENT Glue 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DURATEC GREY SRC PRDdER Tooling surficin 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
ZYVAX Sic cieaoer 29.19 0.0 14.1 0.0 14.1 0.0 0.0 0.o 0.0 28.2
MARBOCOAT Mold Release a, 28.02 0.0 22.4 0.0 0.0 0.0 0.0 0.0 5.6 28.0
OSCARS Mold Release a; 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
PROPATCH ADD1nVE Patch 80.00 44.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 44.0
MMA(EA.) Putty 13.26 0.0 0.0 0.0 0.0 0.0 8.6 0.0 0.0 3.6
MOLD RELEASE Mold Release 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DIVAIET7E Putty 325.26 130.1 0.0 0.0 0.0 0.0 0.0 3.3 0.0 133.4
FV STYRENE Styrene 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
GL Wax Wax 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
partall Film 810 Polyvinyl Aleoh 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Sea Gnp 5000 Adhesiw 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
ec04-90-1.7 and SP Foam Foam Goo 0.0 0.0 0.0 0.0 0.00000 0.0 0.0 00 0.0
Axel XTEND S-19C Mold Sealer 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Light Gay EZ Sanding Primer Pruner 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Totals: 6817.6 1739.8 36.5 0.00 14.1 0.0 8.6 39 5.6 1807.9 Total VOC Misc.Materials
Act Hour/Day 12
Act Days/Mo 23
Act.Hwr/Mo 276
Resin and +lc0at Usmx
Aug-12 Styrene Melhacq'lule MF.K Dimetbyl Phthalate
Usage Emission Emission Frmbet o Emission
Material Name Descritiw (lamo) (%by nt) Factor (lamo) (%by svt) Factor II W.I.) 1r'r by nil Factor (lame) (%by an Factor (lame)
Nomx MEK.9 Red Resit Catalyst 7000 .100 5.00 0.7 60 100.0 422.4
Noma MEK-9 Resit Catalyst 192.0 ''()0 5.00 0.2 60 100.0 115.2
NLN 71500 INF-12 Resin 904.0 50.0 11.9 53.8
POLYIITE TLP 33234-38 Resin 39580.0 31.5 11.9 1483.7
L.G33LE-2494 Flag Blue Gel Coat 405.0 29.3 50.4 59.9 2.8 78.6 9.0
L G.331E-4155 Stus&Su*s w Com 135.0 29.2 50.4 19.9 2-9 79.6 3.0
WG-LE-2452 Regulator While Cal Coat 4400.0 25.3 50.4 560.4 3.0 78.6 103.4
VPRO-WO013 White Barrier Coal Gel Coat 1984.0 30.3 50.4 303.2 0.0 78.6 0.0
LG-33LE 4152 Carolina Blue Gel Coat 90.0 28.6 50.4 13.0 2.8 78.6 1.9
AGLEI-R7047A Telegrey Gel Coat 270.0 29.5 50.4 40.1 2.8 78.6 6.0
NG33LE-4632 Moon Dust Gel Coat 135.0 28.4 50.4 19.3 3.0 78.6 3.2
945-B-201 Bieck Tooling Gel Coal 100 47.0 50.4 64.0 0.0 78.6 0.0
Tomb: 24917 117.4 0.9 537.6
3149.6 Total VOC Resin and Get Coal,
4957.5 lbleto VOC Grand Told(Resists,Get Coax,Foam,and Misc.Mar.)
1.5 ams/mo VOC Grind Total
48003.0 lb/mo Toml Resin and GC Usage

September 2012 Emissions Regulator Marine,Inc.,Edenton,NC
Miscellaneous Material Usage Emission Rates
�,12 Dimethyl Non-NU
Material Description usw Styrene Toluene Xylene MEK MW MMA Aniline VOC Total VOC
(l1n) Wars) (Wale) (Idmo) (Iblmo) (Ihlmo) (Ibtmo) (Iblmo) Olson) (Ibh")
POLY-BOND 839R Adhesive 5623.20 1372.1 0.0 0.0 0.0 0.0 0.0 0.0 0.0 1372.1
POLY-BOND B46F Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
COREBOND Adhesive 306.90 97.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 97.0
CONTACT CEMENT Glue 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DURATEC GREY SFC PRIMER Tooling surfacin 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
ZYVAX Sic cleaner 28.19 0.0 14.1 0.0 14.1 0.0 0.0 0.0 0.0 28.2
MARBOCOAT Mold Release a, 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
OSCARS Mold Release a, 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
PROPATCN ADDITIVE Patch 32.00 17.6 0.0 0.0 0.0 0.0 0.0 0.0 0.0 17.6
MMA(EA) Putty 66.30 0.0 0.0 0.0 0.0 0.0 43.1 0.0 0.0 43.1
MOLD RELEASE Mold Release 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DIVA[ETIE Putty 298.16 1193 0.0 0.0 0.0 0.0 0.0 3.0 0.0 122.2
FV STYRENE Styrene 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Gl.Wax Wax 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Parrall Film 610 Polyvinyl Aleoh 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Sea Grq)5000 Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
eco4-90.1.7 and SP Foam Foam 0.00 0.0 0.0 0.0 0.0 0.00000 0.0 0.0 0.0 0.0
Axel XTEND S-19C Mold Sealer 0.01) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Light Cray EZ Sanding Primer Primer 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Torah: 63547 I6as.9 14.1 0.00 Ill go 43.1 3.0 0.0 1680.2 Taml VOC Misr.Materials
Act Nour/Day,12
Act.DayalMo 20
Act NoudMo 240
Resin and Gelcoat Usage
Sep.12 Styrene Melhacrylate MEK Dimelhyl Phthaiate
Usage Emission Emission Emission Emission
Material Name Description (lb/mo) (%Irt wt) Factor (lb/mo) I%by xt) Factor Winn) (%by vt) Factor (IWmo) (%by wt) Factor (lb/mo)
Nomx MEK-9 Red Resin Catalyst 736.0 2.00 5.00 0.7 60 100.0 441.6
Nomx MEK-9 Resin Catalyst 256.0 2.00 5.00 0.3 60 100.0 153.6
NW 7150D IMF-12 Resin 2260.0 50.0 11.9 134.5
POLYLIIE TLP 33234-38 Resin 41440.0 31-5 11.9 1533.4
040-2989 Resin 80.0 49.7 11.9 4.7
LG33LF-2494 Flag Blue Gel Coat 405.0 29.3 50.4 59.9 2.8 78.6 9.0
LG33LE-4155 Stars&Stripes act Coal 135.0 29.2 50.4 19.9 2.8 79.6 3.0
WGLE-7452 Regulator White Gel Coat 8640.0 25.3 50A 1100.4 3.0 78.6 203.1
VPRO-WO013 White Barrier Coat Gel Coal 2976.0 30.3 50.4 454.9 0.0 79.6 0.0
LG33LE-4152 Carolina Blue Gel Cost 225.0 28.6 50.4 32.4 2.8 78.6 4.9
WGIE-450D Blue Tone While Gel Coat 135.0 25.3 50.4 17.2 3.0 78.6 31
YGLE2001 F ting Lad Cr1 Cost 135.0 25.0 50.4 17.0 3.0 78.6 3.1
945-B-201 Black Tooting Gel Cost 100 47.0 50.4 32.0 0.0 78.6 0.0
70ta6r. 3359.9 219.9 1.0 595.2
4176.0 Total VOC Red.ad Gel Coats
585&1 OAaa VOC Grand Total(Resins,Gel Coats,Foam,and Mac.Mat)
2.9 mae/mo VOC Grand Total
56531.0 m/mo Total Resin and GC Usage

October 2012 Emissions Regulator Marine,Inc.,Edenton,NC
Miscellaneous Material Usaee Emission Rates
Oct-12 Dimelhyi Nom-Han
Material Deseiptioa Utatde Styrene Toluene X71ene MEK MDI MMA Aniline VOC Total VOC
(Use) (Idmo) (lb/no.) OWmo) (Idmo) (Ibnmo) ([Wm) (Idmo) (Idmo) (lb/me)
POLY-BOND 639R Adhesive 4217.40 1029.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 1029.0
POLY-BOND B46F Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
CORE BOND Adhesive 195.30 61.7 0.0 0.0 0.0 0.0 0.0 0.0 0.0 61.7
CONTACTCEMFNT Glue 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DURATEC GREY SFC PRIMER Tooling surfacin 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
ZYVAX Sic ckaner 29.19 0.0 14.1 0.0 14.1 0.0 0.0 0.0 0.0 29.2
MARBOCOAT Mold Release at 42.03 0.0 33.6 0.0 0.0 0.0 0.0 0.0 8.4 42.0
OSCARS Mold Release at 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
PROPATCH ADDITIVE Patch 32.00 17.6 0.0 0.0 0.0 0.0 0.0 0.0 0.0 17.6
MMA(EA-) Putty 53.04 0.0 0.0 0.0 0.0 0.0 34.5 0.0 0.0 34.5
MOLD RELEASE Mold Release 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DIVALET E Puny 216.94 86.7 0.0 0.0 0.0 0.0 0.0 2.2 0.0 98.9
FV STYRENE Styrene 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
GL Wax Wax 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Parmll Fdm#10 Polyvinyl Aleoh 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Sea Grip 5000 Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
eco4-9D 1.7 and SP Foam Foam 0.00 0.0 0.0 0.0 0.0 0.00000 0.0 0.0 0.0 0.0
Axel XTEND S-19C Mold Scaler 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Light Gray EZ Sanding Primer Printer 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Tomb. 47US 11911 47.7 &so W 0.0 34.5 2.2 8.4 1301.9 Total VOC Misr.Materials
Act.Hour/Dav 12
Act.DassMlo 23
Act.Hour/Mu 276
Resin and Gcicoat Usaec
Oct-12 sty- Methacrylate MEK Dimethyl Phthalate
Ueage Envision Emission Emission Emission
Material Name Descd on (Idmo) (%by wt) Factor (Ib/mu1 h,by wp Factor UNmo) (% wl) Facer (lbhmo) (%b wt) Factor (Idmo)
Norox MEK-9 Red Resin Catalyst 736.0 2.00 5.00 0.7 60 100.0 4416
Nomx MEK-9 Resin Catalyst 256.0 2.00 5.00 03 60 100.0 153.6
NLN 715M INF-12 Resin 904.0 50.0 11.9 53.8
POLYIITE TIP 33234-38 Resin 409W.0 31.5 11.9 1533.1
L.G33LE-2494 Fbg Blue Gel Coal 450.0 29.3 50.4 66.5 2.8 78.6 10.0
WGLE-2452 Regulator Whit. Get Coat 4211.0 25.3 50.4 536.3 3.0 79.6 99.0
VPRO-WO013 White Barrier Coat Gel Cat 1984.0 30.3 30.4 303.2 0.0 78.6 0.0
LG33LE-4152 Carolina Blue Gel Coat 90.0 29.6 50.4 13.0 2.9 79.6 1.9
WGLE-4500 Blue Tone While Gel Coat 90.0 25.3 50.4 11.5 3.0 79.6 2.1
OGLE-4274 Aqua Mist Gel Coat 90.0 25.3 50.4 11.5 3.0 78.6 2.1
Torah: 2528.8 115.2 1.0 595.2
3240.2 Told VOC Resin and Get Coat,
4542.1 lbhno VOC Grand Told(Resins,Gel Coats.Foam,and Misc.Mat)
2.3 madmo VOC Grand Total
48719.0 mlmo Told Resin and GC Usage

November 2012 Emissions Regulator Marine,Inc.,Edenton,NC
Misccllancats Material Us Emission Rates
Novd2 Dimethyl Non-Haz
Material Description Uage Styrene Toluene Xylene MF.K MDT MMA Aniline VOC TOW VOC
Obs) (INmo) (INmo) (INmo) (Ibhno) (INmo) (Ibmo) (INmo) (INmo) (1N.m)
POLY-BOND B39R Adhesise 4217.40 1029.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 1029.0
POLY-BOND B46F Adhesise 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
CORE BOND Adhesise 195.30 61.7 0.0 0.0 0.0 0.0 0.0 0.0 0.0 61.7
CONTACT CEMENT Glue 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DURATEC GREY SFC PRIMER Tooling surfacm 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
ZYVAX Sic cleaner 28.19 0.0 14.1 0.0 14.1 0.0 0.0 0.0 0.0 28.2
MARROCOAT Mold Release a; 42.03 0.0 33.6 0.0 0.0 0.0 0.0 0.0 8.4 42.0
OSCARS Mold Release a, 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
PROPATCH ADDITIVE Patch 32.00 17.6 0.0 0.0 0.0 0.0 0.0 0.0 0.0 17.6
MMA(FA) Puny 53.04 0.0 0.0 0.0 0.0 0.0 34.5 0.0 0.0 34.5
MOLD RELEASE Mold Release 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
pryALFITE Putty 216.84 86.7 0.0 0.0 0.0 0.0 0.0 2.2 0.0 88.9
FV STYRENE Styrene 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
CL Wax Wax 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Partall Fdm 610 Polynnyl Alcob 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 no
Sea Grip 5000 Adhesar 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
eeo4-90-1.7 and SP Foam Foam 0.00 0.0 0.0 0.0 0.0 0.00000 0.0 0.0 0.0 0.0
Axel XTEND S-19C Mold Sealer 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Light Cray EZ Sanding Printer Printer 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Totals: 4794.8 119S.1 47.7 0.00 14.1 0.0 34.5 22 8.4 1301.9 Tomf VOC Marc.Maeseinb
Act.Hour/Day 12
Am Days/Mo 22
Act.Hour/Mo 2"
Resin and Gcicoat Usage
Nov-12 Sly"" MNbacrylate MEK Dimethyl PbtbWate
Usage Ford on Emission Emission Emlalon
Material Name Description (INmo) (%by wt) Fndor (INmo) (%by wt) Fador Wave) (%by wt) Factor (INmo) (%bY wl) Factor (Ibmo)
Norox MEK-9 Red Resin Catalyst 512.0 2.00 5.00 0.5 60 100.0 307.2
Nomx MEK-9 Resin Catalyst 192.0 2.00 5.00 0.2 60 100.0 115.2
NLN 7150064F12 Resin 1356.0 50.0 11.9 80.7
POLYIIPE TIP 33234-38 Resin 29740-0 3" 11.9 1114.8
LG.33LE-2494 Flag Blue Gel Coat 90.0 29.3 50.4 13.3 2.8 78.6 2.0
LG33LE-4155 Stam&Su*s Gel Coat 90.0 292 50.4 13.2 2.8 78.6 2.0
WGIE-7452 Regulator White Gel Coat 6284.0 25.3 50.4 800.3 3.0 78.6 147.7
VPRO-WO013 White Barrier Coat Gel Coat 1994.0 30.3 50.4 303.2 0.0 78.6 0.0
LG33LE-4152 Carolina Bluc Gel Coat 90.0 28.6 50.4 13.0 2.8 79.6 1.9
WGIE-4500 Blue Tone White Gel Coat 135.0 25.3 50.4 17.2 3.0 78.6 32
GG.E-4274 Nua Mist Gel Coat 90.0 1 25.3 50.4 11.5 1 3.0 78.6 2.1
Takla: 2767.2 IS" 0.7 422.4
2949.2 Total VOC Resin and Gel COOtr
4251.1 UV.,VO4C Grad Toad(Resins,Gel Coors,Foam,and Misc.Mat)
2.1 an=/mo VOC Gna dTotal
39859.0 0/mo Tonal Resin and GC Usage

December 2012 Emissions Regulator Marine,Inc,Edenton,NC
Miscellaneous Material Usage Emission Rates
Dec-12 Dimethyl Non-Haz
Material Description Usage Styrene Toluene Xylene MEK MDI MMA Aniline VOC TOW VOC
(Ibs) (Ibmo) (Ibmo) (Ibno) (Ibmo) (Ibmo) (Iblmo) (INmo) (INmo) (lbhno)
POLY-BOND B39R Adhesive 3280.20 800.4 0.0 0.0 0.0 0.0 0.0 0.0 0.0 800.4
POLY-BOND B46F Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
CORE BOND Adhesive 55.80 17.6 0.0 0.0 0.0 0.0 0.0 0.0 0.0 17.6
CONTACTCEMENT Gluc 0.0D 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DURATEC GREY SFC PRIMER Tooling surfacm 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
ZYVAX Sfc cleaner 14.09 0.0 7.0 0.0 7.0 0.0 0.0 0.0 0.0 14.1
MARBOCOAT Mold Release a; 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
OSCARS Mold Release a; 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
PROPATCH ADDIIWE Patch 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
MMA(EA.) Pony 13.26 0.0 0.0 0.0 0.0 0.0 8.6 0.0 0.0 8.6
MOLD RFI EASE Mold Release 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DIVAL= Puny 54.21 21.7 0.0 0.0 0.0 0.0 0.0 0.5 0.0 22.2
FV STYRENE Styrene 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
GL Was Wax 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Paring Film 010 Polyvinyl Alcoh 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Sea Grip 5000 Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
eco4-90-1.7 and SP Foam Foam 0.00 0.0 0.0 0.0 0.0 0.00000 0.0 0.0 0.0 0.0
Axel XTEND S-19C Mold Scaler 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Light Cray EZ Sanding Printer Printer 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Totals: 3417.6 $39.7 7.0 0.00 7.0 0.0 8.6 OS 0.0 86ZV Tam/VOC Miss.AfWria4
Act.Hour/Dav 12
Act.DaysAfo 15
Act.".r/Mo 180
Resin and Gelcoat Usage
Dec-12 Styrene Methacrylate MEK Dimethyl Phthalate
Usage En idon Emission Emission Emission
Material Name Description (Ibmo) I%by wl) Factor Ubmo) (%by wt) Factor (INmo) (%by wO Factor (INmo) (%by wt) Factor (INmo)
NLN 715001NF-12 Resin 904.0 50.0 11.9 53.8
LC.331E-2494 Flag Blue Gel Coat 90.0 29.3 50.4 13.3 2.8 78.6 2.0
LGG33LE-4152 Carolina Blue Gel Coat 135.0 29.6 50.4 19.4 2.8 78.6 2.9
WG-LE-4500 Blue Tone White Gel Coat 90.0 25.3 50.4 11.5 3.0 79.6 2.1
RG-33LE-2003 Sunfast Red Gel Cam 90.0 27.7 50.4 12.6 2.7 78.6 1.9
Tamp: 110.6 8.9 0.0 0.0
119.5 Total VOC Resin and Gel Coals
982.4 Wmo VOC Grmd Trial(Resins,Gel Coors,Foam,and Mise.Mai)
0.5 mmshno VOC Grand Told
1309.0 1bIwo Total Resin and GC Usage

Emissions by Operating Scenario for Pollutant
2012 Inventory
Facility Name: Regulator Marine Inc
Facility ID : 2100073 Permit : 07132
Process ID Operating Scenario Emission Rate(Tons/Yr)Emission Source ID
CO
Peak power generator operated from off—site. .13 1-4
3 ES-2
ES-1
1 fiberglass lamination/ elcoatin operation S-1
NOx
3 ES-2
Peak power generator operated from off—site. .6 1-4
ES-1
1 fiberglass lamination/ elcoatin operation ES-1
PM TSP
2 eak power generator operated from off—site. .04 —4
3 S-2
I fiberglass lamination/ elcoatin operation .35 S-1
S-1
PM 10
Peak power generator operated from off—site. .04 I-4
3 ES-2
1 fiberglass lamination/ elcoatin operation .35 ES-1
S-1
PM2.5
Peak power generator operated from off—site. .04 —4
3 S-2
1 fiberglass lamination/ elcoatin operation .35 S-1
S-1
S02
3 ES-2
ES-1
Peak power generator operated from off—site. .01 I-4
1 fiberglass lamination/ elcoatin operation ES-1
VOC
3 1 1 S-2
eak power generator operated from off—site. 1.05 —4
1

S-1
1 fiberglass lamination/ elcoatin operation 5.5 S-1
Process ID Operating Scenario Emission Rate(Pounds/Yr)Emission Source ID
Benzene
S-2
Dieth l aniline N N—
ES
Dimeth I vhthaIate
1 iber lass lamination/ elcoatin operation 837 S-1
Hexane n—
S-2
Meth 1 eth 1 ketone
1 iber lass lamination/ elcoatin o eration 1101 S-1
Meth 1 methacrvlate
S-2
1 fiber lass lamination/ elcoatin operation 177-1 S-1
S-1
Meth lene di hen 1 diisoc ante DI (Component of POMTV
ES-2
Stvrene
1 fiberglass lamination/ elcoatin operation 42971 S-1
S-2
S-1
Toluene
Peak Power generator operated from off—site. .11 —4
S-2
1 fiberglass lamination/ elcoatin operation 226 S-1
2