AQ_F_0700122_20120628_EI_Fac-EI-Rpt

Inventory Certification Form(Title V)
Facility Name: Fountain Power Boats Facility ID :0700122
1653 Whichards Beach Road SR 1166 Permit: 06175
Washington,NC 27889 County: Beaufort
DAQ Region : WARO
North Carolina Department of Environment and Natural Resources
Division of Air Quality
Air Pollutant Point Source Emissions Inventory-Calendar Year 2011
These forms must be completed and returned even if the facility did not operate or emissions were zero
The legally defined "Responsible Official" of record for your facility is John Walker
This person or one that meets the definition below must sign this certification form.
The official submitting the information must certify that he/she complies with the requirements as specified in Title 15A
NCAC 2Q.0520(b)which references and follows the federal definition.40 CFR Part 70.2 defines a responsible as meaning one
of the following:
1.For a corporation: a president,secretary,treasurer,or vice-president of the corporation in charge of a principal
business function,or any other person who performs similar policy or decision making functions for the overall
operation of one or more manufacturing,production,or operating facilities applying for a or subject to a permit and
either
i.the facilities employ more than 250 persons or have gross annual sales or expenditures exceeding$25
million(in second quarter 1980 dollars);or
ii. the delegation of authority to such representatives is approved in advance by the permitting authority;
2.For partnership or sole propietorship;a general partner or the proprietor,respectively;
3. for a muncipality, state,federal,or other public agency includes the chief executive officer having responsibility for the
overall operations of a principal geographic unit of the agency(e.g.,a Regional Administrator of EPA).
(Iml2ortant7 Legplly Resl2onsible Official. read andsign after aH submission-are fUMU
certify that I am the responsible official for this facility,as described above,and hereby certify that the information contained
in this air emissions report,including attached calculations and documentation,is true,accurate and complete.(Subject to legal
enalities of up to$25,000 per occurrence and possible imprisonment as outlined in G.S.§143-215.3(a)(2))
Responsible Official's Signature Below use blue ink): Date Signed: - 2—
Printed Name: John Walker
Signature:
This fonfVplies to Title V facilities.If this facility is not classified as Title V,please telephone your regional office Emission
Inventory contact at once for proper forms.
Email address of Responsible Official: [e-mail]
R
Yrc
Information on this Form cannot be held confidential JUN 2 8 2012
DAQ WARO
1

Facility Total CY 2011 Emission Summary Recorded in ED Facility ID #: 0700122
Facility Name: Fountain Power Boats Permit#(s): 06175T I I
Green House Gases Pollutants (GHG) Actual Emissions
Tons/Yr % Change
Pollutant CAS
Not Not N/A
Reported Reported
CO2 equivalent(sum of individual GHG pollutant emission times their No GHGs
IPCC Global Warming Potential (GWP), converted to metric tons) Reported
Criteria Pollutants Actual Emissions % Change
(Tons/Year)
Pollutant CAS CY 2011 CY 2010
fr from Fees
PM(TSP) TSP 0.630000 0.260000 142.3%
PM10 PM10 0.310000 0.130000 138.5%)
PM2.5 PM2.5 0.160000 0.070000 128.6"/%
VOC VOC 18.87 8.72 116.4
Hazardous Air Pollutants (HAPs) Actual Emissions % Change
and/or Toxic Air Pollutants(TAPS) (Pounds/Year)
Pollutant CAS CY 2011 CY 2010
Nickel& Compounds, sum total mass includes elemental 1.40 0.900000 55.1r
Nickel, soluble compounds as nickel(Component of NICKSOLCPDS 1.40 0.900000 55.61
NIC)
Glycol ethers (total all individual glycol ethers-See 1.20 5.20 -76.9
htt .11da .state.nc.us/tozics/ 1 co
Glycol Ethers, Unlisted-Specify Compound GLYET-Other 1.20 5.20 -76.9'%,
(component of GLYET) (See
http://daq.state.nc.usltoxics
Cumene 98-82-8 2.70 1.30 107.7%
Dibutylphthalate 84-74-2 Not Not N/A
Reported Reported
Dimethyl phthalate 131-11-3 94.20 45.90 105.21%
Ethyl acetate 141-78-6 4.10 12.50 -67.2'%
07/13/2012 Page 1 of 2
I

Facility Total CY 2011 Emission Summary Recorded in ED Facility ID#: 0700122
Facility Name: Fountain Power Boats Permit#(s): 06175T1 I
Hazardous Air Pollutants (HAPs) Actual Emissions % Change
and/or Toxic Air Pollutants (TAPS) (Pounds/Year)
Pollutant CAS CY 2011 CY 2010
Ethyl benzene 10041-4 19.40 12.50 55.2'%
Hexamethylene-1,6-diisocyanate 822-06-0 0.600000 0.900000 -33.30/6
Hexane, n- 110-54-3 4.20 5.20 -19.2%,
MEK(methyl ethyl ketone, 2-butanone) 78-93-3 68.00 125.10 -45.60/6
Methanol (methyl alcohol) 67-56-1 0.700000 6.20 -88.70/o
Methyl methacrylate 80-62-6 2,123.00 1,566.40 35.51%
Methylene chloride 75-09-2 Not Not N/A
Reported Reported
MIBK (methyl isobutyl ketone) 108-10-1 57.30 37.70 52.0%
Styrene 100-42-5 26,544.80 13,029.90 103.7%
Toluene 108-88-3 74.60 67.90 9.9%
Xylene (mixed isomers) 1330-20-7 149.90 j 99.40 50.8%,
Largest Individual HAP Styrene 26,544.80 Ibs
Total HAP Emissions 9,074.00 Ibs
DAO's Comments Reca rdinc Inventory
07/13/2012 Page 2 of 2

Fountain Powerboats
2011 Emission Inventory Calculations
VOC,HAP and PM Emission Calculations
This document describes actual Volatile Organic Compound(VOC),Particulate Matter(PM)and
Hazardous Air Pollutant(HAP)emissions from the facility. In accordance with AP-42 section
Section 4.4(updated 5/08),emission calculations use ANSI/ACMA/ICPA UEF-1-2004
Estimating Emission Factors from Open Molding Composite Processes which utilize the Unified
Emission Factors(UEF)for open molding of composites dated July 23,2001. An attached table
lists the basis for each emission factor(E-factor)utilized in the emissions calculations. A copy of
the July 23,2001 UEF table is also included with this letter.
The gelcoat spray guns are atomized. The styrene emission factor used for gelcoats is from the
gelcoat application row of the UEF table. The Methyl Methacrylate(MMA)emission factor used
for gelcoats is based on the MMA gelcoat application row of the UEF table. The resin guns are
non-atomized. The emission factor for lamination resins is taken from the mechanical non-
atomized row of the UEF table.
Small quantities of highly reactive liquid organic perioxide solutions(e.g.,Hi Point 90)are used
by the reinforced plastics industry to initiate the polymerization reaction in the resin or gelcoat
material. Emission estimates in this permit application are based on the composite Manufacturer
Associations' study,"Emission Factors for Liquid Organic Peroxide Catalysts used in the Open
Molding of Composites." The emission factor for Dimethyl Phthalate(DMP)or other utilized
organic is 0.04%of the available DMP by weight or 0.0144(0.04 x 36%).
Usage of and thus emissions from other raw materials(e.g.,mold cleaners and sealers,etc.)at the
Washington plant are smaller in nature. Emissions from these other material usages and/or
chemicals utilize a similar methodology or conservatively assume all of the chemical is emitted
(e.g.,solvents in paints used).
Particulate emissions from painting are calculated assuming a 1%total weight loss with 50
percent of those emissions PM10 and 25 percent of those emissions PM2.5 as a conservative
estimate with no controls.
Particulate emissions from paint usage:
600 lbs paint bought plant-wide
assume 1%loss as particulate emissions,50%of that is PMto and 25%is PM2.5
600 lbs x 0.01 =6 pounds PM/year=0.003 tons PM/year
6 lbs PM x 0.5=3 pounds PMldyear=0.002 tons PMIQ/year
6 lbs PM x 0.25= 1.5 pounds PM2.5/year—0.001 tons PM2.5/year
Particulate emissions from hull and deck grinding:
500,000 lbs resin and gelcoat bought plant-wide
assume 1%loss with 25%of that emitted as particulate emissions,50%of that is PM10 and 25%
is PM2.5-
500,000 lbs x 0.01 x 0.25= 1,250 pounds PM/year=0.63 tons PM/year

Fountain Powerboats
2011 Emission Inventory Calculations
1,2501bs PM x 0.5=625 pounds PMra/year=0.31 tons PMrdyear
1,2501bs PM x 0.25=313 pounds PM2.5/year=0.16 tons PM2.5/year

Unified Emission Factors for Open Molding of Composites
July 23,2001
Emission Rate in Pounds of Styrene Emitted per Ton of Resin or Gelcoat Processed
Styrene content in resin/gelcoat,%111 133(2) 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 >60(2)
Manual 0.126x%styrenex20W 83 89 94 100 106 1112 1117 123 129 1134 140 1146 1152 157 163 169 1174 1 180 ((0.286 x%styrene)-0.0529)x 2000
Manual w/Vapor Suppressed Resin VSR p1 Manual emission factor[listed above] x (1 -(0.50 x specific VSR reduction factor for each resin/suppressant formulation))
Mechanical Atomized 0.169 x%styrene x 2000 111 126 1 140 1 154 1 168 1 183 1 197 211 225 240 1 254 268 1 283 1 297 1 311 1 325 1 340 1 354 ((0.714 x%styrene)-0.18)x 2000
Mechanical Atomized with VSR"' Mechanical Atomized emission factor[listed above] x (1 - (0.45 x specific VSR reduction factor for each resin/suppressant formulaton))
Mechanical Atomized Controlled Spray j°' 0.130 x%styrene x 2000 86 1 97 1108 1 119 1 130 1 141 1 152 1 163 174 185 196 1 207 1 216 1 229 1 240 1 251 1 262 1 273 1 0.77 x((0.714 x%styrene)-0.18)x 2000
Mechanical Controlled Spray with VSR Mechanical Atomized Controlled Spray emission factor(listed above] x If -(0.45 x specific VSR reduction factor for each resin/suppressant formulation))
Mechanical Non-Atomized 0.107 x%styrene x 2000 71 1 74 1 77 1 80 1 83 1 86 1 89 1 93 1 96 99 102 1 105 1 106 1 111 1 115 1 118 1 121 1 124 1 ((0.157 x%styrene)-0.0165)x 2000
Mechanical Non-Atomized with VSR"' Mechanical Non-Atomized emission factor[listed above] x (1 - (0.45 x specific VSR reduction factor for each resin/suppressant fonnulation))
Filament application 0.184 x%styrene x 2000 122 127 133 138 144 149 155 160 166 171 177 182 188 193 199 204 210 215 ((0.2746 x%styrene)-0.0298)x 2000
Filament application with VSR n' 0.120 x%styrene x 2000 79 83 86 90 93 97 100 104 108 111 115 118 122 125 129 133 136 140 0.65 x f0.2746 x%styrene)-0.0298)x 2000
Gelcoat Application 0.445 x%styrene x 2000 294 315 336 356 377 398 418 439 460 481 501 522 543 564 584 605 626 646 ((1.03646 x%styrene)-0.195)x 2000
Gelcoat Controlled Spray Application"') 0.325 x%styrene x 2000 215 230 245 260 275 290 305 321 336 351 366 381 396 411 427 44 4457 472 0.73 x((1.03646 x%styrene)-0.195)x 2000
Gelcoat Non-Atomized Application SEE SEE Note 9 below 196 205 214 223 232 241 250 259 268 278 287 296 305 314 323 332 341 350 ((0.4506 x%styrene)-0,0505)x 2000
Covered-Cure after Roll40ut Non-VSR process emission factor(listed above] x (0.80 for Manual <or> 0.85 for Mechanical)
Covered-Cure without Roll-Out Non-VSR process emission factor Fisted above) x (0.50 for Manual <on 0.55 for Mechanical)
Emission Rate in Pounds of Methyl Methacrylate Emitted per Ton of Gelcoat Processed
MMA content in gelcoat,%cs) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 17 18 19 220
Gel coat application"' 15 30 45 60 75 90 105 120 135 150 165 180 195 210 225 240 1255 270 1285 1 0.75 x%MMA x 2000
Notes
1 Including styrene monomer content as supplied,plus any extra styrene monomer added by the molder,but before addition of other additives such as powders,fillers,glass,...etc.
2 Formulas for materials with styrene content<33%are based on the emission rate at 33%(constant emission factor expressed as percent of available styrene),and for styrene content>50%on the emission rate based on the extrapolated factor equations;these
are not based on test data but are believed to be conservative estimates. The value for"%styrene"in the formulas should be input as a fraction. For example,use the input value 0.30 for a resin with 30%styrene content by wt.
3 The VSR reduction factor is determined by testing each resin/suppressant formulation according to the procedures detailed in the CFA Vapor Suppressant Effectiveness Test
4 SEE the CFA Controlled Spray Handbook for a detailed description of the controlled spray procedures.
5 The effect of vapor suppressants on emissions from filament winding operations is based on the Dow Filament Winding Emissions Study.
6 Including MMA monomer content as supplied,plus any extra MMA monomer added by the molder,but before addition of other additives such as powders,fillers,glass....etc.
7 Based on gelcoat data from NMMA Emission Study.
8 SEE the July 17,2001 EEC report Emission Factors for Non-Atomized Application of Gel Coats used in the Open Molding of Composites for a detailed description of the non-atomized gelcoat testing.
9 Use the equation ((0.4506 x%styrene)-0.0606)x 2000 for gelcoats with styrene contents between 19%and 32%by col.; use the equation 0.185 x%styrene x 2000 for gelcoats with less than 19%styrene content by wt.
UEF unified factors table revised July 23'01.x1s

Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical (%) (%)
040-2989 Stypol Tooling Resin(040-2989) Mechanical Non-Atomized Styrene 47.03% 0.0575
13706 AWLGARD Interior White Paint(WT8202) N/A—assume all emitted Glycol Ethers 2.00% 0.0200
13706-ACT AWLGARD Converter(WT3201) N/A No reportable HAPs 0.00% 0.0000
13751 Web Grip 175 N/A No reportable HAPs 0.00% 0.0000
13864 Adhesive Integra N/A—assume all emitted Dibutyl Phthalate 0.36% 0.0036
13864 Adhesive Integra N/A—assume all emitted Methyl Methacrylate 50.02% 0.5002
14195 500-10.OB N/A No reportable HAPs 0.00% 0.0000
14195 ALT Elastopor P1484OR N/A No reportable HAPs 0.00% 0.0000
14321 Core-Bond 871 Adhesive Mechanical Non-Atomized Styrene 34.30% 0.0385
1446 Armorcoate Yellow Gelcoat(951 YA596) Gelcoat Application-MMA Methyl Methacrylate 8.80% 0.0600
1446 Armorcoate Yellow Gelcoat(951YA596) Gelcoat Application Styrene 31.35% 0.1395
14540 Pitch Black Gelcoat(963BA025) Gelcoat Application-MMA Methyl Methacrylate 6.29% 0.0525
14540 Pitch Black Gelcoat(963BA025) Gelcoat Application Styrene 23.80% 0.1059
1500009 Gray Sand Primer(707-007X) N/A—assume all emitted Ethyl Acetate 2.00% 0.0200
1500009 Gray Sand Primer(707-007X) N/A—assume all emitted Methyl Ethyl Ketone 11.50% 0.1150
1500009 Gray Sand Primer(707-007X) N/A—assume all emitted Styrene 22.10% 0.2210
1500110 Hi Point 90 Red(MEKP) N/A Dimethyl Phthalate 36.00% 0.0144
1500230m Black Tooling Gelcoat(9658J115) N/A—assume all emitted Methyl Alcohol 0.72% 0.0072
1500230m Black Tooling Gelcoat(9658J115) Gelcoat Application Styrene 38.07% 0.1990
1500500 Core-Bond B70 Adhesive Mechanical Non-Atomized Styrene 31.60% 0.0338
1500605 Foam(Elastopor P1001 U) N/A No reportable HAPs 0.00% 0.0000
1570 ANTI-STATIC FINAL WIPE N/A—assume all emitted Toluene 1.00% 0.0100
Page 1 of 7

Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical (%) N
1675 3M Finesse It#05928 N/A No reportable HAPs 0.00% 0.0000
1700a Sealer N/A No reportable HAPs 0.00% 0.0000
2476 Hi Point 90 Clear(MEKP) N/A Dimethyl Phthalate 36.00% 0.0144
2817 Gray Sand Primer(707-007X) N/A—assume all emitted Ethyl Acetate 2.00% 0.0200
2817 Gray Sand Primer(707-007X) N/A—assume all emitted Methyl Ethyl Ketone 11.50% 0.1150
2817 Gray Sand Primer(707-007X) N/A—assume all emitted Styrene 22.10% 0.2210
3525 Clear Hi-Gloss Additive(904-001X) N/A—assume all emitted Methyl Ethyl Ketone 14.20% 0.1420
3525 Clear Hi-Gloss Additive(904-001X) N/A—assume all emitted Styrene 33.60% 0.3360
3895 BPO/5 Paste Catalyst N/A No reportable HAPs 0.00% 0.0000
4324 Polycor White Gelcoat(948WJ201) Gelcoat Application Styrene 40,00% 0.2195
435 Marine Sealant Fast Cure 5200 N/A No reportable HAPs 0.00% 0.0000
4629 Clear Coats N/A—assume all emitted Ethylbenzene 5.00% 0.0500
4629 Clear Coats N/A—assume all emitted Methyl Isobutyl Ketone 20.00% 0.2000
4629 Clear Coats N/A—assume all emitted Styrene 1.00% 0.0100
4629 Clear Coats N/A—assume all emitted Toluene 10.00% 0.1000
4629 Clear Coats N/A—assume all emitted Xylene(mixed isomers) 40.00% 0.4000
4630 Reducers N/A—assume all emitted Ethylbenzene 1.00% 0.0100
4630 Reducers N/A—assume all emitted Methyl Ethyl Ketone 40.00% 0.4000
4630 Reducers N/A—assume all emitted n-Hexane 5.00% 0.0500
4630 Reducers N/A—assume all emitted Toluene 30.00% 0.3000
4630 Reducers N/A—assume all emitted Xylene(mixed isomers) 10.00% 0.1000
4631 Deltron 2000 Basecoats N/A—assume all emitted 1,2,4-Trimethyibenzene 5.00% 0.0500
4631 Deltron 2000 Basecoats N/A—assume all emitted 2-Butoxyethyl Acetate 5.00% 0.0500
Page 2 of 7

Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical (°/,) (%)
4631 Deltron 2000 Basecoats N/A—assume all emitted Ethylbenzene 5.00% 0.0500
4631 Deltron 2000 Basecoats N/A—assume all emitted Methyl Ethyl Ketone 20.00% 0.2000
4631 Deltron 2000 Basecoats N/A—assume all emitted Methyl Isobutyl Ketone 20.00% 0.2000
4631 Deltron 2000 Basecoats N/A—assume all emitted N-Butyl Alcohol 20.00% 0.2000
4631 Deltron 2000 Basecoats N/A—assume all emitted Nickel Compounds 1.00% 0.0100
4631 Deltron 2000 Basecoats N/A—assume all emitted Toluene 30.00% 0.3000
4631 Deltron 2000 Basecoats N/A—assume all emitted Xylene(mixed isomers) 20.00% 0.2000
4635a DCX Hardener N/A—assume all emitted Hexamethylene diisocyanate 1.00% 0.0100
4635a DCX Hardener N/A—assume all emitted Isophorone Diisocyanate 1.00% 0.0100
4635b DFX11 Hardener N/A—assume all emitted Isophorone Diisocyanate 5.00% 0.0500
4635c Primer Surface Catalyst(K201) N/A—assume all emitted Ethyl Acetate 10.00% 0.1000
4635c Primer Surface Catalyst(K201) N/A—assume all emitted Hexamethylene diisocyanate 1.00% 0.0100
4635c Primer Surface Catalyst(K201) N/A—assume all emitted Toluene 10.00% 0.1000
4923 Laminex Fillet Manual Styrene 30.00% 0.0378
519 Poly-Bond B39 Adhesive Mechanical Non-Atomized Styrene 24.40% 0.0307
5212100 3M Super Duty 05955 N/A—assume all emitted 1,2,4-Trimethylbenzene 1.00% 0.0100
5221010 Sikaflex 291,White N/A—assume all emitted Xylene(mixed isomers) 5.00% 0.0500
647A Polyurethane Foam Part A N/A No reportable HAPs 0.00% 0.0000
647E Polyurethane Foam Part B N/A No reportable HAPs 0.00% 0.0000
6586 3M Marine Sealant Fast Cure 4000 N/A No reportable HAPs 0.00% 0.0000
8027 3M Marine Silicone Sealant N/A No reportable HAPs 0.00% 0.0000
865 Sikaflex 221,Black N/A—assume all emitted Xylene(mixed isomers) 5.00% 0.0500
8664 3M Super Silicone Sealant N/A No reportable HAPs 0.00% 0.0000
Page 3 of 7

Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical (%) (%)
8929 ACTECH White Resin(#14 Ultra) N/A—assume all emitted Styrene 15.00% 0.1500
9427 Kantstick Maxi Pull N/A—assume all emitted Cumene 3.00% 0.0300
9427 Kantstick Maxi Pull N/A—assume all emitted Ethylbenzene 5.00% 0.0500
9427 Kantstick Maxi Pull N/A—assume all emitted Xylene(mixed isomers) 50.00% 0.5000
945CJ007 Tool Thinner(945CJ007) Gelcoat Application-MMA Methyl Methacrylate 4.50% 0.0375
945CJ007 Tool Thinner(945CJ007) Gelcoat Application Styrene 45.23% 0.2820
951 RA699 Candy Apple Gelcoat(951 RA699) Gelcoat Application-MMA Methyl Methacrylate 8.06% 0.0600
951 RA699 Candy Apple Gelcoat(951 RA699) Gelcoat Application Styrene 32.09% 0.1428
953WJ301 Base White Gelcoat(953WJ301) Gelcoat Application-MMA Methyl Methacrylate 5.00% 0.0375
953WJ301 Base White Gelcoat(953WJ301) Gelcoat Application Styrene 29.06% 0.1293
954AH187 Light Gray Gelcoat(954AH187) Gelcoat Application-MMA Methyl Methacrylate 4.39% 0.0375
954AH187 Light Gray Gelcoat(954AH187) Gelcoat Application Styrene 35.36% 0.1780
963AK218 Silver Gelcoat(963AK218) Gelcoat Application-MMA Methyl Methacrylate 6.27% 0.0525
963AK218 Silver Gelcoat(963AK218) Gelcoat Application Styrene 23.79% 0.1059
963GK131 HAP33 Sea Foam Gelcoat(963GK131) Gelcoat Application-MMA Methyl Methacrylate 6.16% 0.0490
963GK131 HAP33 Sea Foam Gelcoat(963GK131) Gelcoat Application Styrene 22.23% 0.1630
9631A507 Seattle Grey Gelcoat(9631A507) Gelcoat Application-MMA Methyl Methacrylate 5.56% 0.0450
9631A507 Seattle Grey Gelcoat(9631A507) Gelcoat Application Styrene 21.87% 0.0973
9631-281 Carolina Blue Gelcoat(9631281) Gelcoat Application-MMA Methyl Methacrylate 6.14% 0.0525
9631-281 Carolina Blue Gelcoat(9631-281) Gelcoat Application Styrene 21.99% 0.0978
963LA855 Cobalt Gelcoat(963LA855) Gelcoat Application-MMA Methyl Methacrylate 5.83% 0.0450
963LA855 Cobalt Gelcoat(963LA855) Gelcoat Application Styrene 22.58% 0.1005
963LA860 True Blue Gelcoat(963LA860) Gelcoat Application-MMA Methyl Methacrylate 5.38% 0.0450
Page 4 of 7

Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical (%) (%)
963LA860 True Blue Gelcoat(963LA860) Gelcoat Application Styrene 23.17% 0.1031
963LA862 Midnight Gelcoat(963LA862) Gelcoat Application-MMA Methyl Methacrylate 5.63% 0.0450
963LA862 Midnight Gelcoat(963LA862) Gelcoat Application Styrene 22.34% 0.0994
963LK217 Bel Air Gelcoat(963LK217) No emissions Cobalt 2-Ethylhexanoate 0.15% 0.0000
963LK217 Bel Air Gelcoat(963LK217) No emissions Cobalt Neodecanoate 0.04% 0.0000
963LK217 Bel Air Gelcoat(963LK217) Gelcoat Application-MMA Methyl Methacrylate 5.75% 0.0450
963LK217 Bel Air Gelcoat(963LK217) Gelcoat Application Styrene 22.68% 0.1009
963RH333 Red Gelcoat(963RH333) Gelcoat Application-MMA Methyl Methacrylate 5.81% 0.0450
963RH333 Red Gelcoat(963RH333) Gelcoat Application Styrene 22.95% 0.1021
963YH582 Yellow Gelcoat(963YH582) Gelcoat Application-MMA Methyl Methacrylate 5.75% 0.0450
963YH582 Yellow Gelcoat(963YH582) Gelcoat Application Styrene 22.20% 0.0988
963YJ133 Fighting Yellow Gelcoat(963YJ133) Gelcoat Application-MMA Methyl Methacrylate 6.11% 0.0525
963YJ133 Fighting Yellow Gelcoat(963YJ133) Gelcoat Application Styrene 21.83% 0.0972
963YK140 Canary Yellow Gelcoat(963YK140) Gelcoat Application-MMA Methyl Methacrylate 5.58% 0.0450
963YK140 Canary Yellow Gelcoat(963YK140) Gelcoat Application Styrene 22.69% 0.1009
963YP008 Aztec Yellow Gelcoat(963YP008) No emissions Cobalt 2-Ethylhexanoate 0.15% 0.0000
963YP008 Aztec Yellow Gelcoat(963YP008) No emissions Cobalt Neodecanoate 0.03% 0.0000
963YP008 Aztec Yellow Gelcoat(963YP008) Gelcoat Application-MMA Methyl Methacrylate 5.40% 0.0450
963YP008 Aztec Yellow Gelcoat(963YP008) Gelcoat Application Styrene 24.10% 0.1072
963YP009 Orange Gelcoat(963YP009) No emissions Cobalt 2-Ethylhexanoate 0.15% 0.0000
963YP009 Orange Gelcoat(963YP009) No emissions Cobalt Neodecanoate 0.03% 0.0000
963YP009 Orange Gelcoat(963YP009) Gelcoat Application-MMA Methyl Methacrylate 5.22% 0.0450
963YP009 Orange Gelcoat(963YP009) Gelcoat Application Styrene 24.55% 0.1092
Page 5 of 7

Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical (%) N
967BK150 Black Barrier Coat(967BK150) Gelcoat Application Styrene 32.14% 0.1430
967BK150 Black Barrier Coat(967BK150) Gelcoat Application-MMA Vinyl Toluene 3.69% 0.0300
968WA79 White Gelcoat(968WA79) Gelcoat Application-MMA Methyl Methacrylate 3.00% 0.0225
968WA79 White Gelcoat(968WA79) Gelcoat Application Styrene 28.55% 0.1270
970C949 Polycor 8%Wax Solution(970C949) Manual Styrene 92.00% 0.2102
970X900 Patchaid(970X900) Manual Styrene 50.05% 0.0902
970XJ037 Patchaid(970XJ037) Manual Styrene 57.40% 0.1113
99MWK606 White Gelcoat(99MWK606) No emissions Cobalt 2-Ethylhexanoate 0.04% 0.0000
99MWK606 White Gelcoat(99MWK606) Gelcoat Application-MMA Methyl Methacrylate 2.00% 0.0150
99MWK606 White Gelcoat(99MWK606) Gelcoat Application Styrene 30.78% 0.1370
99MWP060 Ice Blue Gelcoat(99MWP060) No emissions Cobalt 2-Ethylhexanoate 0.02% 0.0000
99MWP060 Ice Blue Gelcoat(99MWP060) No emissions Cobalt Neodecanoate 0.02% 0.0000
99MWPO60 Ice Blue Gelcoat(99MWP060) Gelcoat Application-MMA Methyl Methacrylate 2.09% 0.0225
99MWP060 Ice Blue Gelcoat(99MWP060) Gelcoat Application Styrene 30.75% 0.1368
Dow733c Dow 733 Sealant,Clear N/A No reportable HAPs 0.00% 0.0000
Dow733w Dow 733 Sealant,White N/A No reportable HAPs 0.00% 0.0000
LSPA3201 Polyester Resin(LSPA3201) No emissions Cobalt 2-Ethylhexanoate 0.18% 0.0000
LSPA3201 Polyester Resin(LSPA3201) No emissions Cobalt Neodecanoate 0.05% 0.0000
LSPA3201 Polyester Resin(LSPA3201) Mechanical Non-Atomized Styrene 32.61% 0.0349
MA530 ITW Plexus Adhesive(MA530) MSDS Methyl Methacrylate 60.00% 0.0504
MA560 ITW Plexus Adhesive(MA560) MSDS Methyl Methacrylate 60.00% 0.0504
NONE1 3M Perfect It 05936 N/A No reportable HAPs 0.00% 0.0000
NONE12 Filler Bondo Manual Styrene 20.00% 0.0252
Page 6 of 7

Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical N (%)
NONE13 Adhesive(3M Super 77) N/A—assume all emitted n-Hexane 1.00% 0.0100
NONE15 Cleaner(HPP5) N/A No reportable HAPs 0.00% 0.0000
NONE2 3M Imperial 06044 N/A No reportable HAPs 0.00% 0.0000
NONE22 Aqua Blue 200 N/A No reportable HAPs 0.00% 0.0000
NONE5 Wax Honey(P5401520) N/A No reportable HAPs 0.00% 0.0000
RLPS1401 Stypol Resin(RLPS-1401) Mechanical Non-Atomized Styrene 33.62% 0.0370
Sika291 SIKAFLEX 291 N/A—assume all emitted Toluene 5.00% 0.0500
VSXH2522 VE Resin(VSXH2522) No emissions Cobalt 2-Ethylhexanoate 0.17% 0.0000
VSXH2522 VE Resin(VSXH2522) No emissions Cobalt Neodecanoate 0.05% 0.0000
VSXH2522 VE Resin(VSXH2522) Mechanical Non-Atomized Styrene 34.56% 0.0385
Page 7 of 7

1,91
Fountain Powerboats Washington Plant:Usage and VOC 8 HAPEmissions- - - ._YearEnding: December 2011
040-2989 Usage(gal): 5.0 VOC Content(wt%): 0.470 VOCs(lbs): 2.6
Stypol Tooling Resin(040-2989) Usage(lbs): 45.0 HAP Content(wt%): 0.470 HAPs(lbs): 2.6
Density(lb/gal): 8.95
CAS No Chemical Weight% E-Factor HAP Lbs
100-42-5 Styrene 47.03% 0.058 2.6
13706 Usage(gal): 5.0 VOC Content(wt%): 0.115 VOCs(Ibs): 7.0
AWLGARD Interior White Paint Usage(lbs): 61.3 HAP Content(wt%): 0.020 HAPs(Ibs): 1.2
(WT8202) Density(lb/gal): 12.25
CAS No Chemical Weight% E-Factor HAP Lbs
WA Glycol Ethers 2.00% 0.020 1.2
13706-ACT Usage(gal): 5.0 VOC Content(wt%): 0.094 VOCa(Ibs): 4.4
AWLGARD Converter(WT3201) Usage(Ibs): 46.6 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Density(lb/gal): 9.31
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.000h 0.000 0.0
13751 Usage(gal): 0.2 VOC Content(wt°/a): 0.700 VOCs(lbs): 1.7
Web Grip 175 Usage(Ibs): 2.4 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Density(lb/gal): 10.01
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.000/0 0.000 0.0
13864 Usage(gal): 0.3 VOC Content(wt%): 0.504 VOCs(Ibs): 1.3
Adhesive Integra Usage(Ibs): 2.5 HAP Content(wt°/): 0.504 HAPs(Ibs): 1.3
Density(Ib/gal): 8.88
CAS No Chemical Weight% E-Factor HAP Lbs
84-74-2 Dibutyl Phthalate 0.36% 0.004 0.0
80.62-6 Methyl Methacrylate 50.02% 0.500 1.2
14195 Usage(gal): 229.1 VOC Content(wt°/u): 0.000 VOCs(Ibs): 0.0
500-10.013 Usage(lbs): 1,930.0 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Density(lb/gal): 8.42
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.000/0 0.000 0.0
14195 ALT Usage(gal): 224.2 VOC Content(wt%): 0.000 VOCs(lbs): 0.0
Elastopor P14840R Usage(Ibs): 2,000.0 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Density(lb/gal): 8.92
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.000/0 0.000 0.0
0 Value Environmental 6/18/2012 Page 1 of 13

Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2011
14321 Usage(gal): 4,705.3 VOC Content(wt%): 0.343 VOCs(lbs): 1,435.3
Core-Bond B71 Adhesive Usage(lbs): 37,280.0 HAP Content(wt°/u): 0.343 HAPs(lbs): 1,435.3
Density(lb/gal): 7.92
CAS No Chemical Weight% E-Factor HAP Lbs
100-42-5 Styrene 34.30% 0.039 1,435.3
1446 1 Usage(gal): 5.01 VOC Content(wt%): 0.394 VOCs(lbs): 9.2
Armorcoate Yellow Gelcoat Usage(lbs): 48.0 HAP Content(wt%): 0.402 HAPs(lbs): 9.6
(951 YA596) Density(Ib/gal): 9.59
CAS No Chemical Weight% E-Factor HAP Lbs
80-62-6 Methyl Methacrylate 8.800/0 0.060 2.9
100-42-5 Styrene 31.35% 0.140 6.7
14540 Usage(gal): 46.9 VOC Content(wt%): 0.301 VOCs(lbs): 79.2
Pitch Black Gelcoat(963BA025) Usage(lbs): 500.0 HAP Content(wt%): 0.301 HAPs(lbs): 79.2
Density(lb/gal): 10.65
CAS No Chemical Weight% E-Factor HAP Lbs
80-62-6 Methyl Methacrylate 6.29% 0.053 26.3
100-42-5 Styrene 23.80% 0.106 53.0
1500009 Usage(gal): 10.0 VOC Content(wt%): 0.356 VOCs(lbs): 38.6
Gray Sand Priner(707-007X) Usage(lbs): 108.4 HAP Content(wt%): 0,221 HAPs(lbs): 24.0
Density(Ib/gal): 10.84
CAS No Chemical Weight% E-Factor HAP Lbs
141-78-6 Ethyl Acetate 2.00% 0.020 2.2
78-93-3 Methyl Ethyl Ketone 11.500/a 0.115 12.5
100-42-5 Styrene 22.10% 0.221 24.0
1500110 Usage(gal): 608.5 VOC Content(wt%): 0.360 VOCs(lbs): 78.3
Hi Point 90 Red(MEKP) Usage(lbs): 5,440.0 HAP Content(wt%): 0.360 HAPs(lbs): 76.3
Density(lb/gal): 8.94
CAS No Chemical Weight% E-Factor HAP Lbs
131-11-3 Dimethyl Phthalate 36.00% 0.014 78.3
1500230m Usage(gal): 10.5 VOC Content(wt%): 0.388 VOCs(lbs): 19.6
Black Tooling Gelcoat Usage(lbs): 95.0 HAP Content(wt%): 0.388 HAPs(lbs): 19.6
(965B.1115) Density(lb/gal): 9.09
CAS No Chemical Weight% E-Factor HAP Lbs
67-56-1 Methyl Alcohol 0.72% 0.007 0.7
100.42-5 Styrene 38.07% 0.199 18.9
1500500 Usage(gal): 945.0 VOC Content(wt0k): 0.316 VOCs(Ibs): 191.8
Core-Bond B70 Adhesive Usage(lbs): 5,674.5 HAP Content(wt%): 0.316 HAPs(lbs): 191.8
Density(lb/gal): 6.00
CAS No Chemical Weight% E-Factor HAP Lbs
100.42-5 Styrene 31.60% 0.034 191.8
©Value Environmental 6/18/2012 Page 2 of 13

Fountain Powerboats Washington Plant:Usage and VOC 8:HAP Emissions Year Ending: December 2011
1500605 Usage(gal): 161.7 VOC Content(wt%): 0.000 VOCs(lbs): 0.0
Foam(Elastopor P1001u) Usage(lbs): 1,653.0 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Density(lb/gal): 10.22
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.008/0 0.000 0.0
1570 Usage(gal): 1.0 VOC Content(wt%): 1.000 VOCs(lbs): 6.4
ANTI-STATIC FINAL WIPE Usage(lbs): 6.4 HAP Content(wt%): 0.010 HAPs(lbs): 0.1
Density(Ib/gal): 6.36
CAS No Chemical Weight% E-Factor HAP Lbs
108-88-3 Toluene 1.00% 0 010 0.1
1675 Usage(gal): 1.5 VOC Content(wt%): 0.638 VOC3(lbs): 8.0
3M Rnesse It#05928 Usage(Ibs): 12.5 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Density(lb/gal): 8.34
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.00% 0.000 0.0
1700a Usage(gal): 1.3 VOC Content(wt%): 0.358 VOCs(Ibs): 5.5
Sealer Usage(Ibs): 15.4 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Density(lb/gal): 12.32
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.00% 0.000 0.0
2476 Usage(gal): 123.5 VOC Content(wt%): 0.360 VOCs(lbs): 15.9
Hi Point 90 Clear(MEKP) Usage(Ibs): 1,104.0 HAP Content(wt%): 0.360 HAPs(lbs): 15.9
Density(lb/gal): 8.94
CAS No Chemical Weight% E-Factor HAP Lbs
131-11-3 Dime"Phthalate 36.00% 0014 15.9
2817 Usage(gal): 4.0 VOC Content(wt%): 0.356 VOCs(Ibs): 15.4
Gray Sand Prirner(707-007X) Usage(Ibs): 43.4 HAP Content(wt°/6): 0.221 HAPs(Ibs): 9.6
Density(Ib/gal): 10.84
CAS No Chemical Weight% E-Factor HAP Lbs
141-78-6 Ethyl Acetate 2.00% 0.020 0.9
78.93-3 Methyl Ethyl Ketone 11.50% 0.115 5.0
100-42-5 Styrene 22.10% 0.221 9.6
3525 Usage(gal): 2.0 VOC Content(wt%): 0.478 VOCs(Ibs) 8.1
Clear Hi-Gloss Additive(904- Usage(lbs): 17.0 HAP Content(wt%): 0.336 HAPs(Ibs): 5.7
001X) Density(Ib/gal): 8.51
CAS No Chemical Weight% E-Factor HAP Lbs
78-93-3 Methyl Ethyl Ketone 14.200/6 0.142 2.4
100-42-5 Styrene 33.60% 0.336 5.7
©Value Environmental 6/1 812 0 1 2 Page 3 of 13

Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions Is, Year Ending: December 2011
3895 Usage(gal): 25.0 VOC Content(wt°/u): 0.200 VOCs(lbs): 4114
BPO/5 Paste Catalyst Usage(lbs): 241.9 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 9.67
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.0D% 0.000 0.0
4324 Usage(gal): 842.4 VOC Content(wt%): 0.4001 1 VOCs(lbs): 1,939.9
Polycor White Gelcoat Usage(lbs): 8,838.0 HAP Content(wt%): 0.4001 1 HAPs(lbs): 1,939.9
(948WJ201) Density(lb/gal): 10.49
CAS No Chemical Weight% E-Factor HAP Lbs
100-42-5 Styrene 40.00% 0.220 1,939.9
435 Usage(gal): 13.1 VOC Content(wt 6 0.020 VOCs(Ibs): 2.9
Marine Sealant Fast Cure 5200 Usage(lbs): 145.6 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Density(Iblgal): 11.09
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.00% 0.000 0.0
4629 Usage(gal): 18.8 VOC Content(we/6): 0.508 1 1 VOCs(lbs): 75.8
Clear Coats Usage(lbs): 149.3 HAP Content(wt%): 0.7601 1 HAPs(lbs): 113.4
Density(lb/gal): 7.95
CAS No Chemical Weight% E-Factor HAP Lbs
100-41-4 Ethylbenzene 5.00"/u 0.050 7.5
108-10-1 Methyl Isobutyl Ketone 20.000/9 0.200 29.9
100.42-5 Styrene 1.00% 0.010 1.5
108-88-3 Toluene 10.00% 0.100 14.9
1330-20-7 Xylene(mixed Isomers 40.00°/a 0.400 59.7
4630 Usage(gal): 7.5 VOC Content(wt%): 1.000 VOCs(lbs): 51.9
Reducers Usage(lbs): 51.9 HAP Content(wt%): 0.460 HAPs(lbs): 23.9
Density(lb/gal): 6.91
CAS No Chemical Weight% E-Factor HAP Lbs
100-41-4 Ethylbenzene 1.00% 0.010 0.5
78-93-3 Methyl Ethyl Ketone 40.00% 0.400 20.7
110-54-3 n-Hexane 5.00% 0.050 2.6
108-88-3 Toluene 30.00% 0.300 15.6
1330-20.7 Xylene(mixed isomers 10.00% 0.100 5.2
0 Value Environmental 6/18/2012 Page 4 of 13

Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2011
4631 Usage(gal): 16.1 VOC Content(wt%): 0.860 VOCs(Ibs): 118.0
DeBron 2000 Basecoals Usage(Ibs): 137.2 HAP Content(wt%): 0.760 HAPs(Ibs): 104.3
Density(lb/gal): 8.51
CAS No Chemical Weight% E-Factor HAP Lbs
95-63.6 1,2,4-Tdmethylbenzen 5.00% 0.050 6.9
112-07-2 2-Butoxyethyl Acetate 5.000/0 0.050 6.9
100-41-4 Ethylbenzene 5.00% 0.050 6.9
78-93-3 Methyl Ethyl Ketone 20.00% 0.200 27A
108-10-1 Methyl Isobutyl Ketone 20.00% 0.200 27A
71-36-3 N-Butyl Alcohol 20.00% 0.200 27A
N/A Nickel Compounds 1.000%o 0.010 1A
108-88-3 Toluene 30.00% 0.300 41.2
1330-20-7 Xylene(mixed isomers 20.00% 0.200 27A
4635a Usage(gal): 6.0 VOC Content(we/,): 0.161 VOCs(lbs): 8.6
DCX Hardener Usage(Ibs): 53.7 HAP Content(wt%): 0.010 HAPs(Ibs): 0.5
Density(lb/gal): 8.96
CAS No Chemical Weight% E-Factor HAP Lbs
822-06-0 Hexamethylene diisoc 1.00% 0.010 0.5
409&71-9 Isophorone Diisocyan 1.000/0 0.010 0.5
4635c Usage(gap: 1.3 VOC Content(wt*/u): 0.583 VOCs(Ibs): 5.9
Primer Surface Catalyst(K201) Usage(Ibs): 10.2 HAP Content(wt%): 0.110 HAPs(Ibs): 1.1
Density(lb/gal): 8.15
CAS No Chemical Weight% E-Factor HAP Lbs
141-78-6 Ethyl Acetate 10.00% 0.100 1.0
822-06-0 Hexamethylene diisoc 1.00% 0.010 0.1
108-88-3 Toluene 10.00% 0.100 1.0
4923 Usage(gal): 42.0 VOC Content(wt%): 0.300 VOCs(Ibs): 13.2
Laminex Fillet Usage(Ibs): 350.3 HAP Content(wt%): 0.300 HAPs(Ibs): 13.2
Density(lblgal): 8.34
CAS No Chemical Weight% E-Factor HAP Lbs
100-42-5 Styrene 30.00% 0.038 13.2
519 Usage(gal): 1,430.0 VOC Content(wt%): 0.244 VOCs(Ibs): 402.7
Poly-Bond B39 Adhesive Usage(Ibs): 13,118.8 HAP Content(wt%): 0.244 HAPs(Ibs): A02.7
Density(lb/gal): 9.17
CAS No Chemical Weight% E-Factor HAP Lbs
100-42-5 Styrene 24.40% 0.031 402.7
5221010 Usage(gal): 18.3 VOC Content(wt%): 0.082 VOCs(Ibs) 14.8
Sika8ex291,White Usage(Ibs): 181.4 HAP Content(wt%): 0.050 HAPs(Ibs): 9.1
Density(lb/gal): 9.92
CAS No Chemical Weight% E-Factor HAP Lbs
1330-20-7 Xylene(mixed Isomers 5.000/6 0.050 9.1
0 Value Environmental 6/18/2012 Page 5 of 13

Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2011
647A Usage(gal): 72.4 VOC Content(wt%): 0.000 VOCs(lbs): 0.0
Polyurethane Foam Part A Usage(lbs): 748.8 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 10.34
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.00% 0.000 0.0
647E Usage(gal): 71.1 VOC Content(wt%): 0.000 VOCs(lbs): 0.0
Polyurethane Foam Part B Usage(lbs): 711.4 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(Ib/gal): 10.01
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.000/0 0.000 0.0
6586 Usage(gal): 2.5 VOC Content(wt°/a): 0.011 VOCs(lbs): 0.3
3M Marine Sealant Fast Cure Usage(lbs): 29.6 HAP Content(wt"/u): 0.000 HAPs(lbs): 0.0
4000 Density(lb/gal): 11.68
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.000/0 0.000 0.0
8027 Usage(gal): 12.0 VOC Content(wt%): 0.034 VOCs(lbs): 3.5
3M Marine Silicone Sealant Usage(lbs): 102.1 HAP Content(wt°/u): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 8.51
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.00% 0.000 0.0
865 Usage(gal): 5.6 VOC Content(wt%): 0.050 VOCs(lbs): 3.0
SikaOex 221,Black Usage(lbs): 59.6 HAP Content(wt%): 0.050 HAPs(Ibs): 3.0
Density(Ib/gal): 10.59
CAS No Chemical Weight% E-Factor HAP Lbs
1330.20.7 Xylem(mixed isomers 5.00% 0.050 3.0
8664 Usage(gal): 1.2 VOC Content(wt%): 0.100 VOCs(lbs): 1.0
3M Super Silicone Sealant Usage(lbs): 10.4 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 8.67
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.00% 0.000 0.0
8929 Usage(gal): 6.0 VOC Content(wt%): 0.150 VOCs(lbs): 12.8
AOTECH White Resin(#14 Usage(lbs): 85.6 HAP Content(wt%): 0.150 HAPs(lbs): 12.8
Ultra) Density(Ib/gal): 14.26
CAS No Chemical Weight% E-Factor HAP Lbs
100.42-5 Styrene 15.000/a 0.150 12.8
0 Value Environmental 6/18/2012 Page 6 of 13

Fountain Powerboats Washington Plant:Usage and VOC 8.HAP Emissions Swear Ending: December 2011
9427 Usage(gal): 13.0 VOC content(wt%): 1.000 1 1 VOCs(lbs): 91.0
Kantstick Maxi Pull Usage(lbs): 91.0 HAP Content(wt%): 0.580 HAPs(lbs): 52.8
Density(Ib/gal): 7.00
CAS No Chemical Weight% E-Factor HAP Lbs
98-82-8 Cumene 3.00% 0.030 2.7
100-41-4 Ethylbenzene 5.00% 0.050 4.6
1330-20-7 Xylene(mixed isomers 50.00% 0.500 45.5
945CJ007 Usage(gal): 170.0 VOC Content(wV/u): 0.497 VOCs(lbs): 482.4
Tool Thinner(945CJ007) Usage(lbs): 1,510.0 HAP Content(wt%): 0.497 HAPs(lbs): 482.4
Density(Ib/gal): 8.88
CAS No Chemical Weight% E-Factor HAP Lbs
80.62-6 Methyl Methacrylate 4.50% 0.038 56.6
100-42-5 Styrene 45.23% 0.282 425.8
951RA699 Usage(gal): 183.8 VOC Content(wt°/9): 0.402 VOCs(lbs): 351.9
Candy Apple Gelcoat Usage(lbs): 1,735.0 HAP Content(wt%): 0.402 HAPs(lbs): 351.9
(951RA699) Density(lb/gal): 9.44
CAS No Chemical Weight% E-Factor HAP Lbs
80-62-6 Methyl Methacrylate 8.06% 0.060 104.1
100-42-5 Styrene 32.09% 0.143 247.8
953WJ301 Usage(gal): 27.4 VOC Content(wt^/,): 0.341 VOCs(lbs): 49.2
Base White Gelcoat(953WJ301) Usage(lbs): 295.0 HAP Content(wt%): 0.341 HAPs(lbs): 49.2
Density(Ib/gal): 10.78
CAS No Chemical Weight% E-Factor HAP Lbs
80-62-6 Methyl Methacrylate 5.00% 0.038 11.1
100.42-5 Styrene 29.06% 0.129 38.1
954AH187 Usage(gal): 53.1 VOC Content(wt%): 0.3981 1 VOCs(lbs): 116.0
Light Gray Gelcoat(954AH187) Usage(lbs): 538.0 HAP Content(wt%): 0.398 HAPs(lbs): 115.9
Density(lb/gal): 10.13
CAS No Chemical Weight% E-Factor HAP Lbs
80-62-6 Methyl Methacrylate 4.39% 0.038 20.2
100-42-5 Styrene 35.36% 0.178 95.8
963AK218 Usage(gal): 4.7 VOC Content(wt%): 0.3091 1 VOCs(Ibs): 8A:
Silver Gelcoat(963AK218) Usage(lbs): 50.o HAP Content(wt%): 0.301 HAPs(lbs): 7.8
Density(ib/gai): 10.63
CAS No Chemical Weight% E-Factor HAP Lbs
80-62-6 Methyl Methacrylate 6.27% 0.053 2.6
10042-5 Styrene 23.79% 0.106 5.3
Value Environmental 6/18/2012 Page 7 of 13

,,, ..,y -'u A` ,'4 r , �'.I. , k a
in .owet1 Washington ant: sage nd VOA missionshearndmepemer 071
963GK131 Usage(gat): 153.3 VOC Content(wt%): 0.284 VOCs(lbs): 358.9
HAP33 Sea Foam Gelcoat Usage(lbs): 1,693.0 HAP Content(wt%): 0.284 HAPs(lbs): 358.9
(963GK131) Density(Ib/gal): 11.04
CAS No Chemical Weight% E-Factor HAP Lbs
80-62-6 Methyl Melhacrylale 6.16% 0.049 83.0
100-42-5 Styrene 22.23% 0.163 276.0
9631A507 Usage(gal): 75.1 VOC Content(wt%): 0.274 VOCs(lbs): 119.7
Seattle Grey Gelcoat(9631A507) Usage(lbs): 841.0 HAP Content(wt%): 0.274 HAPs(lbs): 119.7
Density(lb/gal): 11.19
CAS No Chemical Weight% E-Factor HAP Lbs
80-62-6 Methyl Methacrylate 5.56% 0.045 37.8
100-42-5 Styrene 21.87% 0.097 81.8
963L281 Usage(gal): 123.5 VOC Content(wt%): 0.288 VOCs(lbs): 214.0
Carolina Blue Gelcoat(963L281) Usage(lbs): 1,365.2 HAP Content(wt%): 0.281 HAPs(lbs): 2052.
Density(Iblgal): 11.05
CAS No Chemical Weight% E-Factor HAP Lbs
80-62-6 Methyl Methacrylate 6.14% 0.053 71.7
100-42-5 Styrene 21.99% 0.098 133.6
963LA855 Usage(gal): 99.2 VOC Content(wt%): 0.284 VOCs(lbs): 154.3
Cobalt Gelcoat(963LA855) Usage(lbs): 1,060.0 HAP Content(wt%): 0.284 HAPs(lbs): 154.2
Density(lb/gal): 10.68
CAS No Chemical Weight% E-Factor HAP Lbs
80-62-6 Methyl Methacrylate 5.83% 0.045 47.7
100-42-5 Styrene 22.58% 0.101 106.5
963LA860 Usage(gal): 9.4 VOC Content(wt%): 0.285 VOCs(lbs): 14.8
True Blue Gelcoat(963LA860) Usage(lbs): 100.0 HAP Content(wt%): 0.286 HAPs(lbs): 14.8
Density(Iblgal): 10.66
CAS No Chemical Weight% E-Factor HAP Lbs
80-62-6 Methyl Methacrylate 5.38% 0.045 4.5
100-42-5 Styrene 23.17% 0.103 10.3
963LA862 Usage(gal): 80.5 VOC Content(wt%): 0.280 VOCs(lbs): 123.1
Midnight Gelcoat(963LA862) Usage(lbs): 853.0 HAP Content(wt%): 0.280 HAPs(lbs): 123.2
Density(lb/gal): 10.59
CAS No Chemical Weight% E-Factor HAP Lbs
80-62-6 Methyl Methacrylate 5.63% 0.045 38.4
100-42-5 Styrene 22.34% 0.099 84.8
0 Value Environmental 6/18/2012 Page 8 of 13

Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 201
963LK217 Usage(gal): 32.5 VOC Content(wt%): 0.299 VOCs(lbs): 55.5
Bel Air Gelcoat(963LK217) Usage(lbs): 350.0 HAP Content(wt°/a): 0.284 HAPs(lbs): 91.1
Density(Iblgal): 10.76
CAS No Chemical Weight% E-Factor HAP Lbs
136-52-7 Cobalt2-Ethyhexanoa 0.15% 0.000 0.0
27253-31-2 Cobalt Neodecanoate 0.04% 0.000 0.0
80-62.6 Methyl Methacrylate 5.75% 0.045 15.8
100.42-5 Styrene 22.68% 0.101 35.3
963RH333 Usage(gal): 928.5 VOC Content(wt%): 0.288 VOCs(lbs): 1,452.4
Red Gelcoat(963RH333) Usage(lbs): 9,873.0 HAP Content(wt%): 0.288 HAPs(lbs): 1,452.4
Density(Ib/gal): 10.63
CAS No Chemical Weight% E-Factor HAP Lbs
80-62-6 Methyl Methacrylate 5.81% 0.045 444.3
100-42-5 Styrene 22.95% 0.102 1,008.1
963YH582 Usage(gal): 27.5 VOC Content(wV/a): 0.279 VOCs(lbs): 42.7
Yellow Gelcoat(963YH582) Usage(lbs): 297.0 HAP Content(wt%): 0.280 HAP9(lbs): 42.7
Density(Ib/gal): 10.80
CAS No Chemical Weight% E-Factor HAP Lbs
80-62-6 Methyl Methacrylate 5.75% 0.045 13A
100-42-5 Styrene 22.20% 0.099 29.3
963YJ133 Usage(gal): 26.8 VOC Content(cat°/,): 0.279 VOCs(Ibs): 44.4
Fighting Yellow Gelcoat Usage(lbs): 297.0 HAP Content(wt"/o): 0.279 HAPs(lbs): 44.4
(963YJ133) Density(Ib/gal): 11.08
CAS No Chemical Weight% E-Factor HAP Lbs
80-62-6 Methyl Methacrylate 6.11% 0.053 15.6
100-42-5 Styrene 21,83% 0.097 28.9
963YK140 Usage(gal): 53.9 VOC Content(wt%): 0.283 VOCs(lbs): $3.9
Canary Yellow Gelcoat Usage(lbs): 575.0 HAP Content(wt%): 0.283 HAPs(lbs): 93.9
(963YK140) Density(Ib/gal): 10.66
CAS No Chemical Weight% E-Factor HAP Lbs
80-62.6 Methyl Methacrylate 5.58% 0.045 25.9
100-42-5 Styrene 22.69% 0.101 58.0
963YP008 Usage(gal): 27.0 VOC Content(wt%): 0.310 VOCs(lbs): 47.2
Aztec Yellow Gelcoat Usage(lbs): 286.0 HAP Content(wt%): 0.295 HAPs(lbs): 43.5
(963YP008) Density(lb/gal): 10.58
CAS No Chemical Weight% E-Factor HAP Lbs
136-52-7 Cobalt2-Ethyhexanoa 0.15% 0.000 0.0
27253-31-2 Cobalt Neodecanoate 0.03% 0.000 0.0
80.62-6 Methyl Methacrylate 5.40% 0.045 12.9
100-42-5 Styrene 24.10% 0.107 30.7
©Value Environmental 6/1 812 01 2 Page 9 of 13

Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2011
963YP009 Usage(gat): 27.7 VOC Content(wt%): 0.314 VOCs(lbs): 49.0
Orange Gekoat(963YP009) Usage(lbs): 290.6 HAP Content(wt%): 0.298 HAPs(lbs): 44.8
Density(Iblgal): 10.48
CAS No Chemical Weight% E-Factor HAP Lbs
136-52-7 Cobalt 2-Ethyhexanoa 0.15% 0.000 0.0
27253-31-2 Cobalt Neodecanoate 0.03% 0.000 0.0
80-62.6 Methyl Methacrylate 5.22% 0.045 13.1
100.42-5 Styrene 24.55% 0.109 31.7
967BK150 Usage(gal): 105.4 VOC Content(cat°h): 0.364 VOCs(ibs): 182.9
Black Barrier Coat(967BK150) Usage(lbs): 1,023.0 HAP Content(wtV°): 0.321 HAPs(lbs): 146.3
Density(Ib/gal): 9.71
CAS No Chemical Weight% E-Factor HAP Lbs
100-42-5 Styrene 32.14% 0.143 146.3
25013-15.4 Vinyl Toluene 3.69% 0.030 30.7
968WA79 Usage(gal): 547.8 VOC Content(wt%): 0.317 1 VOCs(lbs): 976.6
White Gelcoat(968WA79) Usage(lbs): 6,480.0 HAP Content(wt%): 0.315 HAPs(lbs): 969.0
Density(Ib/gal): 11.83
CAS No Chemical Weight% E-Factor HAP Lbs
8"2-6 Methyl Methacrylate 3.00% 0.023 145.8
100-42-5 Styrene 28.55% 0.127 823.2
970CS49 Usage(gal): 9.o VOC Content(wt%): 0.920 VOCs(lbs): 14.1
Polycor 8%Wax Solution Usage(lbs): 67.2 HAP Content(wt%): 0.920 HAPs(Ibs): 14.1
(970C949) Density(Ib/gal): 7.46
CAS No Chemical Weight% E-Factor HAP Lbs
100-42-5 Styrene 92.000/6 0.210 14.1
970X900 Usage(gal): 22A VOC Content(wt%): 0.515 VOCs(Ibs): 20.7
Patchaid(970X900) Usage(lbs): 197.5 HAP Content(wt%): 0.500 HAPs(lbs): 47.8
Density(lb/gal): 8.81
CAS No Chemical Weight% E-Factor HAP Lbs
100.42-5 Styrene 50.05% 0.090 17.8
970XJ037 Usage(gal): 39.2 VOC Content(wt%): 0.583 VOCs(Ibs): 40.4
Patchaid(970XJ037) Usage(lbs): 335.1 HAP Content(wt%): 0.574 HAPs(lbs): 37.3
Density(Ib/gal): 8.56
CAS No Chemical Weight% E-Factor HAP Lbs
100-42-5 Styrene 57.40% 0.111 37.3
©Value Environmental 6/18/2012 Page 10 of 13
1

Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2011
99MWK606 Usage(gal): 2085.7 VOC Content(wt%): 0.336 VOCs(Ibs): 3,766.1
White Gelcoat(99MWK606) Usage(lbs): 231567.0 HAP Content(wt%): 0.328 HAPs(lbs): 3,581.4
Density(Ib/gal): 11.30
CAS No Chemical Weight% E-Factor HAP Lbs
136.52-7 Cobalt2-Ethyhexanoa 0.04"/a 0.000 0.0
8"2-6 Methyl Melhacrylale 2.00% 0.015 353.5
100-42-5 Styrene 30.78% 0.137 3,227.9
99MWP060 Usage(gal): 56.8 VOC Content(wt°/u): 0.337 VOCs(Ibs): 107.2
Ice Blue Gelcoat(99MWP060) Usage(lbs): 640.8 HAP Content(wt°/u): 0.328 HAPs(lbs): 102.1
Density(lb/gal): 11.28
CAS No Chemical Weight% E-Factor HAP Lbs
136-52-7 Cobalt2-Ethyhexanoa 0.02% 0.000 0.0
27253-31-2 Cobalt Neodecanoate 0.02% 0.000 0.0
80.62-6 Methyl Methacrylate 2.09% 0.023 14.4
100-42-5 Styrene 30.75% 0.137 87.7
Dow733c Usage(gal): 22.0 VOC Content(wt%): 0.1001 VOCs(lbs): 19.1
Dow 733 Sealant,Clear Usage(lbs): 190.9 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 8.67
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.00% 0.000 0.0
Dow733w Usage(gal): 26.5 VOC Content(wt%): 0.100 VOCs(Ibs): 23.0
Dow 733 Sealant,While Usage(Ibs): 230.0 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Density(Ib/gal): 8.67
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.00% 0.000 0.0
LSPA3201 Usage(gal): 26,879.0 VOC Content(wV/u): 0.350 VOCs(lbs): 13,420.7
Polyester Resin(LSPA3201) Usage(lbs): 239,000.0 HAP Content(wt%): 0.326 HAPs(lbs): 8.339-1
Density(lb/gal): 8.89
CAS No Chemical Weight% E-Factor HAP Lbs
136-52-7 Cobalt2-Ethyhexanoa 0.18% 0.000 0.0
27253-31-2 Cobalt Neodecanoate 0.05% 0.000 0.0
100-42-5 Styrene 32.61% 0.035 8,339.1
MA530 Usage(gal): 88.1 VOC Content(wt°/a): 0.624 VOCs(lbs): 54.0
ITW Plexus Adhesive(MA530) Usage(Ibs): 727.7 HAP Content(wt%): 0.600 HAPs(lbs): 36.7
Density(lb/gal): 8.26
CAS No Chemical Weight% E-Factor HAP Lbs
80-62-6 Methyl Methacrylale 60.00% 0.050 36.7
©Value Environmental 6/18/2012 Page 11 of 13

o tita owe ash n an sage nd OC 'LIE
s o s ' ar i g. ecember 0
t
MA560 Usage(gal): 1,258.0 VOC Content(wt%): 0.624 VOCs(Ibs): 770.3
ITW Plexus Adhesive(MA560) Usage(Ibs): 10,386.8 HAP Content(wt%): 0.600 HAPs(Ibs): 523.7
Density(Ib/gal): 8.26
CAS No Chemical Weight% E-Factor HAP Lbs
80-62-6 Methyl Methacryiate 60.00% 0.050 523.7
NONE1 Usage(gal): 1.0 VOC Content(wt%): 0.433 VOCs(Ibs): 3.7
3M Perfect It 05936 Usage(Ibs): 8.5 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Density(Ib/gal): 8.51
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.00% 0.000 0.0
NONE12 Usage(gal): 43.0 VOC Content(wt%): 0.200 VOCs(Ibs): 10.4
Filler Bondo Usage(Ibs): 412.4 HAP Content(wt%): 0.200 HAPs(Ibs): 10.4
Density(lb/gal): 9.59
CAS No Chemical Weight% E-Factor HAP Lbs
100-42-5 Styrene 20.00% 0.025 10.4
NONE13 Usage(gal): 27.2 VOC Content(wt%): 0.750 VOCs(Ibs): 118.5
Adhesive(3M Super 77) Usage(Ibs): 158.0 HAP Content(wt%): 0.010 HAPs(Ibs): 1.6
Density(Ib/gal): 5.81
CAS No Chemical Weight% E-Factor HAP Lbs
110-54-3 n-Hexane 1.00% 0.010 1.6
NONE15 Usage(gal): 110.0 VOC Content(wt%): 0.175 VOCs(Ibs): 163.8
Cleaner(HPP5) Usage(Ibs): 935.7 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 8.51
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.00% 0.000 0.0
NONE2 Usage(gal): 38.8 VOC Content(wt%): 0.660 VOCs(Ibs): 268.9
3M Imperial 06044 Usage(Ibs): 407.2 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Density(lb/gal): 10.51
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.00% 0.000 0.0
NONE22 Usage(gal): 26.0 VOC Content(wt%): 0.350 VOCs(Ibs): 75.9
Aqua Blue 200 Usage(Ibs): 216.8 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Density(lb/gal): 8.34
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.00% 0.000 0.0
NONES Usage(gal): 70.0 VOC Content(wt%): 0.700 VOCs(Ibs): 343.4
Wax Honey(P5401520) Usage(Ibs): 490.4 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Density(Ib/gal): 7.01
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.00% 0.000 0.0
©Value Environmental 6/18/2012 Page 12 of 13

Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2011
RLPS1401 Usage(gal): 54.7 VOC Content(wt%): 0.336 VOCs(lbs): 18.5
Stypol Resin(RLPS-1401) Usage(lbs): 500.0 HAP Content(wt%): 0.336 HAPs(lbs): 18.5
Density(lb/gal): 9.15
CAS No Chemical Weight% E-Factor HAP Lbs
100.42-5 Styrene 33.62% 0.037 18.5
Sika291 Usage(gal): 3.9 VOC Content(wt%): 0.082 VOCs(lbs): 3.1
SIKAFLEX 291 Usage(lbs): 38.3 HAP Content(wt%): 0.050 HAPs(lbs): 1.9
Density(Ib/gal): 9.92
CAS No Chemical Weight% E-Factor HAP Lbs
108-88-3 Toluene 5.00% 0.050 1.9
VSXH2522 Usage(gal): 19,879.E VOC Content(wt°/o): 0.358 VOCs(lbs): 8,857.2
VE Resin(VSXH2522) Usage(lbs): 181,220.0 HAP Content(wt%): 0.346 HAPs(lbs): 6,977.0
Density(Ib/gal): 9.12
CAS No Chemical Weight% E-Factor HAP Lbs
136-52-7 Cobalt 2-Ethyhexanoa 0.17% 0.000 0.0
27253-31-2 Cobalt Neodecanoate 0.05% 0.000 0.0
100.42-5 Styrene 34.56% 0.039 6,977.0
Month(Ibs) Month(tons)
VOCs: 37,748 18.87
HAPs: 29,074 14.54
©Value Environmental 6/18/2012 Page 13 of 13
1

CAS No Chemical Emissions (lbs) Emissions (tons)
HAP?
98-82-8 Cumene 2.7 0.00
84-74-2 Dibutyl Phthalate 0.0 0.00
131-11-3 Dimethyl Phthalate 94.2 0.05
100-41-4 Ethylbenzene 19.4 0.01
N/A Glycol Ethers 1.2 0.00
822-06-0 Hexamethylene diisocyanate 0.6 0.00
67-56-1 Methyl Alcohol 0.7 0.00
108-10-1 Methyl Isobutyl Ketone 57.3 0.03
80-62-6 Methyl Methacrylate 2,123.0 1.06
110-54-3 n-Hexane 4.2 0.00
N/A Nickel Compounds 1.4 0.00
No reportable HAPs 0.0 0.00
100-42-5 Styrene 26,544.8 13.27
108-88-3 Toluene 74.6 0.04
1330-20-7 Xylene(mixed isomers) 149.9 0.07
Subtotal 29,074 14.54
HAP? 1
141-78-6 Ethyl Acetate 4.1 0.00
78-93-3 Methyl Ethyl Ketone 68.0 0.03
Subtotal 72 0.04
Total 29,146 14.57
©Value Environmental 6/18/2012 Page 1 of 1

Inventory Certification Form(Title V)
Facility Name: Fountain Power Boats Facility ID :0700122
1653 Whichards Beach Road SR 1166 Permit: 06175
Washington,NC 27889 County: Beaufort
DAQ Region : WARO
North Carolina Department of Environment and Natural Resources
Division of Air Quality
Air Pollutant Point Source Emissions Inventory-Calendar Year 2011
These forms must be completed and returned even if the facility did not operate or emissions were zero
The legally defined "Responsible Official" of record for your facility is John Walker
This person or one that meets the definition below must sign this certification form.
The official submitting the information must certify that he/she complies with the requirements as specified in Title 15A
NCAC 2Q.0520(b)which references and follows the federal definition.40 CFR Part 70.2 defines a responsible as meaning one
of the following:
1.For a corporation: a president,secretary,treasurer,or vice-president of the corporation in charge of a principal
business function,or any other person who performs similar policy or decision making functions for the overall
operation of one or more manufacturing,production,or operating facilities applying for a or subject to a permit and
either
i.the facilities employ more than 250 persons or have gross annual sales or expenditures exceeding$25
million(in second quarter 1980 dollars);or
ii. the delegation of authority to such representatives is approved in advance by the permitting authority;
2.For partnership or sole propietorship;a general partner or the proprietor,respectively;
3. for a muncipality, state,federal,or other public agency includes the chief executive officer having responsibility for the
overall operations of a principal geographic unit of the agency(e.g.,a Regional Administrator of EPA).
(Iml2ortant7 Legplly Resl2onsible Official. read andsign after aH submission-are fUMU
certify that I am the responsible official for this facility,as described above,and hereby certify that the information contained
in this air emissions report,including attached calculations and documentation,is true,accurate and complete.(Subject to legal
enalities of up to$25,000 per occurrence and possible imprisonment as outlined in G.S.§143-215.3(a)(2))
Responsible Official's Signature Below use blue ink): Date Signed: - 2—
Printed Name: John Walker
Signature:
This fonfVplies to Title V facilities.If this facility is not classified as Title V,please telephone your regional office Emission
Inventory contact at once for proper forms.
Email address of Responsible Official: [e-mail]
R
Yrc
Information on this Form cannot be held confidential JUN 2 8 2012
DAQ WARO
1

Facility Total CY 2011 Emission Summary Recorded in ED Facility ID #: 0700122
Facility Name: Fountain Power Boats Permit#(s): 06175T I I
Green House Gases Pollutants (GHG) Actual Emissions
Tons/Yr % Change
Pollutant CAS
Not Not N/A
Reported Reported
CO2 equivalent(sum of individual GHG pollutant emission times their No GHGs
IPCC Global Warming Potential (GWP), converted to metric tons) Reported
Criteria Pollutants Actual Emissions % Change
(Tons/Year)
Pollutant CAS CY 2011 CY 2010
fr from Fees
PM(TSP) TSP 0.630000 0.260000 142.3%
PM10 PM10 0.310000 0.130000 138.5%)
PM2.5 PM2.5 0.160000 0.070000 128.6"/%
VOC VOC 18.87 8.72 116.4
Hazardous Air Pollutants (HAPs) Actual Emissions % Change
and/or Toxic Air Pollutants(TAPS) (Pounds/Year)
Pollutant CAS CY 2011 CY 2010
Nickel& Compounds, sum total mass includes elemental 1.40 0.900000 55.1r
Nickel, soluble compounds as nickel(Component of NICKSOLCPDS 1.40 0.900000 55.61
NIC)
Glycol ethers (total all individual glycol ethers-See 1.20 5.20 -76.9
htt .11da .state.nc.us/tozics/ 1 co
Glycol Ethers, Unlisted-Specify Compound GLYET-Other 1.20 5.20 -76.9'%,
(component of GLYET) (See
http://daq.state.nc.usltoxics
Cumene 98-82-8 2.70 1.30 107.7%
Dibutylphthalate 84-74-2 Not Not N/A
Reported Reported
Dimethyl phthalate 131-11-3 94.20 45.90 105.21%
Ethyl acetate 141-78-6 4.10 12.50 -67.2'%
07/13/2012 Page 1 of 2
I

Facility Total CY 2011 Emission Summary Recorded in ED Facility ID#: 0700122
Facility Name: Fountain Power Boats Permit#(s): 06175T1 I
Hazardous Air Pollutants (HAPs) Actual Emissions % Change
and/or Toxic Air Pollutants (TAPS) (Pounds/Year)
Pollutant CAS CY 2011 CY 2010
Ethyl benzene 10041-4 19.40 12.50 55.2'%
Hexamethylene-1,6-diisocyanate 822-06-0 0.600000 0.900000 -33.30/6
Hexane, n- 110-54-3 4.20 5.20 -19.2%,
MEK(methyl ethyl ketone, 2-butanone) 78-93-3 68.00 125.10 -45.60/6
Methanol (methyl alcohol) 67-56-1 0.700000 6.20 -88.70/o
Methyl methacrylate 80-62-6 2,123.00 1,566.40 35.51%
Methylene chloride 75-09-2 Not Not N/A
Reported Reported
MIBK (methyl isobutyl ketone) 108-10-1 57.30 37.70 52.0%
Styrene 100-42-5 26,544.80 13,029.90 103.7%
Toluene 108-88-3 74.60 67.90 9.9%
Xylene (mixed isomers) 1330-20-7 149.90 j 99.40 50.8%,
Largest Individual HAP Styrene 26,544.80 Ibs
Total HAP Emissions 9,074.00 Ibs
DAO's Comments Reca rdinc Inventory
07/13/2012 Page 2 of 2

Fountain Powerboats
2011 Emission Inventory Calculations
VOC,HAP and PM Emission Calculations
This document describes actual Volatile Organic Compound(VOC),Particulate Matter(PM)and
Hazardous Air Pollutant(HAP)emissions from the facility. In accordance with AP-42 section
Section 4.4(updated 5/08),emission calculations use ANSI/ACMA/ICPA UEF-1-2004
Estimating Emission Factors from Open Molding Composite Processes which utilize the Unified
Emission Factors(UEF)for open molding of composites dated July 23,2001. An attached table
lists the basis for each emission factor(E-factor)utilized in the emissions calculations. A copy of
the July 23,2001 UEF table is also included with this letter.
The gelcoat spray guns are atomized. The styrene emission factor used for gelcoats is from the
gelcoat application row of the UEF table. The Methyl Methacrylate(MMA)emission factor used
for gelcoats is based on the MMA gelcoat application row of the UEF table. The resin guns are
non-atomized. The emission factor for lamination resins is taken from the mechanical non-
atomized row of the UEF table.
Small quantities of highly reactive liquid organic perioxide solutions(e.g.,Hi Point 90)are used
by the reinforced plastics industry to initiate the polymerization reaction in the resin or gelcoat
material. Emission estimates in this permit application are based on the composite Manufacturer
Associations' study,"Emission Factors for Liquid Organic Peroxide Catalysts used in the Open
Molding of Composites." The emission factor for Dimethyl Phthalate(DMP)or other utilized
organic is 0.04%of the available DMP by weight or 0.0144(0.04 x 36%).
Usage of and thus emissions from other raw materials(e.g.,mold cleaners and sealers,etc.)at the
Washington plant are smaller in nature. Emissions from these other material usages and/or
chemicals utilize a similar methodology or conservatively assume all of the chemical is emitted
(e.g.,solvents in paints used).
Particulate emissions from painting are calculated assuming a 1%total weight loss with 50
percent of those emissions PM10 and 25 percent of those emissions PM2.5 as a conservative
estimate with no controls.
Particulate emissions from paint usage:
600 lbs paint bought plant-wide
assume 1%loss as particulate emissions,50%of that is PMto and 25%is PM2.5
600 lbs x 0.01 =6 pounds PM/year=0.003 tons PM/year
6 lbs PM x 0.5=3 pounds PMldyear=0.002 tons PMIQ/year
6 lbs PM x 0.25= 1.5 pounds PM2.5/year—0.001 tons PM2.5/year
Particulate emissions from hull and deck grinding:
500,000 lbs resin and gelcoat bought plant-wide
assume 1%loss with 25%of that emitted as particulate emissions,50%of that is PM10 and 25%
is PM2.5-
500,000 lbs x 0.01 x 0.25= 1,250 pounds PM/year=0.63 tons PM/year

Fountain Powerboats
2011 Emission Inventory Calculations
1,2501bs PM x 0.5=625 pounds PMra/year=0.31 tons PMrdyear
1,2501bs PM x 0.25=313 pounds PM2.5/year=0.16 tons PM2.5/year

Unified Emission Factors for Open Molding of Composites
July 23,2001
Emission Rate in Pounds of Styrene Emitted per Ton of Resin or Gelcoat Processed
Styrene content in resin/gelcoat,%111 133(2) 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 >60(2)
Manual 0.126x%styrenex20W 83 89 94 100 106 1112 1117 123 129 1134 140 1146 1152 157 163 169 1174 1 180 ((0.286 x%styrene)-0.0529)x 2000
Manual w/Vapor Suppressed Resin VSR p1 Manual emission factor[listed above] x (1 -(0.50 x specific VSR reduction factor for each resin/suppressant formulation))
Mechanical Atomized 0.169 x%styrene x 2000 111 126 1 140 1 154 1 168 1 183 1 197 211 225 240 1 254 268 1 283 1 297 1 311 1 325 1 340 1 354 ((0.714 x%styrene)-0.18)x 2000
Mechanical Atomized with VSR"' Mechanical Atomized emission factor[listed above] x (1 - (0.45 x specific VSR reduction factor for each resin/suppressant formulaton))
Mechanical Atomized Controlled Spray j°' 0.130 x%styrene x 2000 86 1 97 1108 1 119 1 130 1 141 1 152 1 163 174 185 196 1 207 1 216 1 229 1 240 1 251 1 262 1 273 1 0.77 x((0.714 x%styrene)-0.18)x 2000
Mechanical Controlled Spray with VSR Mechanical Atomized Controlled Spray emission factor(listed above] x If -(0.45 x specific VSR reduction factor for each resin/suppressant formulation))
Mechanical Non-Atomized 0.107 x%styrene x 2000 71 1 74 1 77 1 80 1 83 1 86 1 89 1 93 1 96 99 102 1 105 1 106 1 111 1 115 1 118 1 121 1 124 1 ((0.157 x%styrene)-0.0165)x 2000
Mechanical Non-Atomized with VSR"' Mechanical Non-Atomized emission factor[listed above] x (1 - (0.45 x specific VSR reduction factor for each resin/suppressant fonnulation))
Filament application 0.184 x%styrene x 2000 122 127 133 138 144 149 155 160 166 171 177 182 188 193 199 204 210 215 ((0.2746 x%styrene)-0.0298)x 2000
Filament application with VSR n' 0.120 x%styrene x 2000 79 83 86 90 93 97 100 104 108 111 115 118 122 125 129 133 136 140 0.65 x f0.2746 x%styrene)-0.0298)x 2000
Gelcoat Application 0.445 x%styrene x 2000 294 315 336 356 377 398 418 439 460 481 501 522 543 564 584 605 626 646 ((1.03646 x%styrene)-0.195)x 2000
Gelcoat Controlled Spray Application"') 0.325 x%styrene x 2000 215 230 245 260 275 290 305 321 336 351 366 381 396 411 427 44 4457 472 0.73 x((1.03646 x%styrene)-0.195)x 2000
Gelcoat Non-Atomized Application SEE SEE Note 9 below 196 205 214 223 232 241 250 259 268 278 287 296 305 314 323 332 341 350 ((0.4506 x%styrene)-0,0505)x 2000
Covered-Cure after Roll40ut Non-VSR process emission factor(listed above] x (0.80 for Manual <or> 0.85 for Mechanical)
Covered-Cure without Roll-Out Non-VSR process emission factor Fisted above) x (0.50 for Manual <on 0.55 for Mechanical)
Emission Rate in Pounds of Methyl Methacrylate Emitted per Ton of Gelcoat Processed
MMA content in gelcoat,%cs) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 17 18 19 220
Gel coat application"' 15 30 45 60 75 90 105 120 135 150 165 180 195 210 225 240 1255 270 1285 1 0.75 x%MMA x 2000
Notes
1 Including styrene monomer content as supplied,plus any extra styrene monomer added by the molder,but before addition of other additives such as powders,fillers,glass,...etc.
2 Formulas for materials with styrene content<33%are based on the emission rate at 33%(constant emission factor expressed as percent of available styrene),and for styrene content>50%on the emission rate based on the extrapolated factor equations;these
are not based on test data but are believed to be conservative estimates. The value for"%styrene"in the formulas should be input as a fraction. For example,use the input value 0.30 for a resin with 30%styrene content by wt.
3 The VSR reduction factor is determined by testing each resin/suppressant formulation according to the procedures detailed in the CFA Vapor Suppressant Effectiveness Test
4 SEE the CFA Controlled Spray Handbook for a detailed description of the controlled spray procedures.
5 The effect of vapor suppressants on emissions from filament winding operations is based on the Dow Filament Winding Emissions Study.
6 Including MMA monomer content as supplied,plus any extra MMA monomer added by the molder,but before addition of other additives such as powders,fillers,glass....etc.
7 Based on gelcoat data from NMMA Emission Study.
8 SEE the July 17,2001 EEC report Emission Factors for Non-Atomized Application of Gel Coats used in the Open Molding of Composites for a detailed description of the non-atomized gelcoat testing.
9 Use the equation ((0.4506 x%styrene)-0.0606)x 2000 for gelcoats with styrene contents between 19%and 32%by col.; use the equation 0.185 x%styrene x 2000 for gelcoats with less than 19%styrene content by wt.
UEF unified factors table revised July 23'01.x1s

Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical (%) (%)
040-2989 Stypol Tooling Resin(040-2989) Mechanical Non-Atomized Styrene 47.03% 0.0575
13706 AWLGARD Interior White Paint(WT8202) N/A—assume all emitted Glycol Ethers 2.00% 0.0200
13706-ACT AWLGARD Converter(WT3201) N/A No reportable HAPs 0.00% 0.0000
13751 Web Grip 175 N/A No reportable HAPs 0.00% 0.0000
13864 Adhesive Integra N/A—assume all emitted Dibutyl Phthalate 0.36% 0.0036
13864 Adhesive Integra N/A—assume all emitted Methyl Methacrylate 50.02% 0.5002
14195 500-10.OB N/A No reportable HAPs 0.00% 0.0000
14195 ALT Elastopor P1484OR N/A No reportable HAPs 0.00% 0.0000
14321 Core-Bond 871 Adhesive Mechanical Non-Atomized Styrene 34.30% 0.0385
1446 Armorcoate Yellow Gelcoat(951 YA596) Gelcoat Application-MMA Methyl Methacrylate 8.80% 0.0600
1446 Armorcoate Yellow Gelcoat(951YA596) Gelcoat Application Styrene 31.35% 0.1395
14540 Pitch Black Gelcoat(963BA025) Gelcoat Application-MMA Methyl Methacrylate 6.29% 0.0525
14540 Pitch Black Gelcoat(963BA025) Gelcoat Application Styrene 23.80% 0.1059
1500009 Gray Sand Primer(707-007X) N/A—assume all emitted Ethyl Acetate 2.00% 0.0200
1500009 Gray Sand Primer(707-007X) N/A—assume all emitted Methyl Ethyl Ketone 11.50% 0.1150
1500009 Gray Sand Primer(707-007X) N/A—assume all emitted Styrene 22.10% 0.2210
1500110 Hi Point 90 Red(MEKP) N/A Dimethyl Phthalate 36.00% 0.0144
1500230m Black Tooling Gelcoat(9658J115) N/A—assume all emitted Methyl Alcohol 0.72% 0.0072
1500230m Black Tooling Gelcoat(9658J115) Gelcoat Application Styrene 38.07% 0.1990
1500500 Core-Bond B70 Adhesive Mechanical Non-Atomized Styrene 31.60% 0.0338
1500605 Foam(Elastopor P1001 U) N/A No reportable HAPs 0.00% 0.0000
1570 ANTI-STATIC FINAL WIPE N/A—assume all emitted Toluene 1.00% 0.0100
Page 1 of 7

Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical (%) N
1675 3M Finesse It#05928 N/A No reportable HAPs 0.00% 0.0000
1700a Sealer N/A No reportable HAPs 0.00% 0.0000
2476 Hi Point 90 Clear(MEKP) N/A Dimethyl Phthalate 36.00% 0.0144
2817 Gray Sand Primer(707-007X) N/A—assume all emitted Ethyl Acetate 2.00% 0.0200
2817 Gray Sand Primer(707-007X) N/A—assume all emitted Methyl Ethyl Ketone 11.50% 0.1150
2817 Gray Sand Primer(707-007X) N/A—assume all emitted Styrene 22.10% 0.2210
3525 Clear Hi-Gloss Additive(904-001X) N/A—assume all emitted Methyl Ethyl Ketone 14.20% 0.1420
3525 Clear Hi-Gloss Additive(904-001X) N/A—assume all emitted Styrene 33.60% 0.3360
3895 BPO/5 Paste Catalyst N/A No reportable HAPs 0.00% 0.0000
4324 Polycor White Gelcoat(948WJ201) Gelcoat Application Styrene 40,00% 0.2195
435 Marine Sealant Fast Cure 5200 N/A No reportable HAPs 0.00% 0.0000
4629 Clear Coats N/A—assume all emitted Ethylbenzene 5.00% 0.0500
4629 Clear Coats N/A—assume all emitted Methyl Isobutyl Ketone 20.00% 0.2000
4629 Clear Coats N/A—assume all emitted Styrene 1.00% 0.0100
4629 Clear Coats N/A—assume all emitted Toluene 10.00% 0.1000
4629 Clear Coats N/A—assume all emitted Xylene(mixed isomers) 40.00% 0.4000
4630 Reducers N/A—assume all emitted Ethylbenzene 1.00% 0.0100
4630 Reducers N/A—assume all emitted Methyl Ethyl Ketone 40.00% 0.4000
4630 Reducers N/A—assume all emitted n-Hexane 5.00% 0.0500
4630 Reducers N/A—assume all emitted Toluene 30.00% 0.3000
4630 Reducers N/A—assume all emitted Xylene(mixed isomers) 10.00% 0.1000
4631 Deltron 2000 Basecoats N/A—assume all emitted 1,2,4-Trimethyibenzene 5.00% 0.0500
4631 Deltron 2000 Basecoats N/A—assume all emitted 2-Butoxyethyl Acetate 5.00% 0.0500
Page 2 of 7

Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical (°/,) (%)
4631 Deltron 2000 Basecoats N/A—assume all emitted Ethylbenzene 5.00% 0.0500
4631 Deltron 2000 Basecoats N/A—assume all emitted Methyl Ethyl Ketone 20.00% 0.2000
4631 Deltron 2000 Basecoats N/A—assume all emitted Methyl Isobutyl Ketone 20.00% 0.2000
4631 Deltron 2000 Basecoats N/A—assume all emitted N-Butyl Alcohol 20.00% 0.2000
4631 Deltron 2000 Basecoats N/A—assume all emitted Nickel Compounds 1.00% 0.0100
4631 Deltron 2000 Basecoats N/A—assume all emitted Toluene 30.00% 0.3000
4631 Deltron 2000 Basecoats N/A—assume all emitted Xylene(mixed isomers) 20.00% 0.2000
4635a DCX Hardener N/A—assume all emitted Hexamethylene diisocyanate 1.00% 0.0100
4635a DCX Hardener N/A—assume all emitted Isophorone Diisocyanate 1.00% 0.0100
4635b DFX11 Hardener N/A—assume all emitted Isophorone Diisocyanate 5.00% 0.0500
4635c Primer Surface Catalyst(K201) N/A—assume all emitted Ethyl Acetate 10.00% 0.1000
4635c Primer Surface Catalyst(K201) N/A—assume all emitted Hexamethylene diisocyanate 1.00% 0.0100
4635c Primer Surface Catalyst(K201) N/A—assume all emitted Toluene 10.00% 0.1000
4923 Laminex Fillet Manual Styrene 30.00% 0.0378
519 Poly-Bond B39 Adhesive Mechanical Non-Atomized Styrene 24.40% 0.0307
5212100 3M Super Duty 05955 N/A—assume all emitted 1,2,4-Trimethylbenzene 1.00% 0.0100
5221010 Sikaflex 291,White N/A—assume all emitted Xylene(mixed isomers) 5.00% 0.0500
647A Polyurethane Foam Part A N/A No reportable HAPs 0.00% 0.0000
647E Polyurethane Foam Part B N/A No reportable HAPs 0.00% 0.0000
6586 3M Marine Sealant Fast Cure 4000 N/A No reportable HAPs 0.00% 0.0000
8027 3M Marine Silicone Sealant N/A No reportable HAPs 0.00% 0.0000
865 Sikaflex 221,Black N/A—assume all emitted Xylene(mixed isomers) 5.00% 0.0500
8664 3M Super Silicone Sealant N/A No reportable HAPs 0.00% 0.0000
Page 3 of 7

Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical (%) (%)
8929 ACTECH White Resin(#14 Ultra) N/A—assume all emitted Styrene 15.00% 0.1500
9427 Kantstick Maxi Pull N/A—assume all emitted Cumene 3.00% 0.0300
9427 Kantstick Maxi Pull N/A—assume all emitted Ethylbenzene 5.00% 0.0500
9427 Kantstick Maxi Pull N/A—assume all emitted Xylene(mixed isomers) 50.00% 0.5000
945CJ007 Tool Thinner(945CJ007) Gelcoat Application-MMA Methyl Methacrylate 4.50% 0.0375
945CJ007 Tool Thinner(945CJ007) Gelcoat Application Styrene 45.23% 0.2820
951 RA699 Candy Apple Gelcoat(951 RA699) Gelcoat Application-MMA Methyl Methacrylate 8.06% 0.0600
951 RA699 Candy Apple Gelcoat(951 RA699) Gelcoat Application Styrene 32.09% 0.1428
953WJ301 Base White Gelcoat(953WJ301) Gelcoat Application-MMA Methyl Methacrylate 5.00% 0.0375
953WJ301 Base White Gelcoat(953WJ301) Gelcoat Application Styrene 29.06% 0.1293
954AH187 Light Gray Gelcoat(954AH187) Gelcoat Application-MMA Methyl Methacrylate 4.39% 0.0375
954AH187 Light Gray Gelcoat(954AH187) Gelcoat Application Styrene 35.36% 0.1780
963AK218 Silver Gelcoat(963AK218) Gelcoat Application-MMA Methyl Methacrylate 6.27% 0.0525
963AK218 Silver Gelcoat(963AK218) Gelcoat Application Styrene 23.79% 0.1059
963GK131 HAP33 Sea Foam Gelcoat(963GK131) Gelcoat Application-MMA Methyl Methacrylate 6.16% 0.0490
963GK131 HAP33 Sea Foam Gelcoat(963GK131) Gelcoat Application Styrene 22.23% 0.1630
9631A507 Seattle Grey Gelcoat(9631A507) Gelcoat Application-MMA Methyl Methacrylate 5.56% 0.0450
9631A507 Seattle Grey Gelcoat(9631A507) Gelcoat Application Styrene 21.87% 0.0973
9631-281 Carolina Blue Gelcoat(9631281) Gelcoat Application-MMA Methyl Methacrylate 6.14% 0.0525
9631-281 Carolina Blue Gelcoat(9631-281) Gelcoat Application Styrene 21.99% 0.0978
963LA855 Cobalt Gelcoat(963LA855) Gelcoat Application-MMA Methyl Methacrylate 5.83% 0.0450
963LA855 Cobalt Gelcoat(963LA855) Gelcoat Application Styrene 22.58% 0.1005
963LA860 True Blue Gelcoat(963LA860) Gelcoat Application-MMA Methyl Methacrylate 5.38% 0.0450
Page 4 of 7

Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical (%) (%)
963LA860 True Blue Gelcoat(963LA860) Gelcoat Application Styrene 23.17% 0.1031
963LA862 Midnight Gelcoat(963LA862) Gelcoat Application-MMA Methyl Methacrylate 5.63% 0.0450
963LA862 Midnight Gelcoat(963LA862) Gelcoat Application Styrene 22.34% 0.0994
963LK217 Bel Air Gelcoat(963LK217) No emissions Cobalt 2-Ethylhexanoate 0.15% 0.0000
963LK217 Bel Air Gelcoat(963LK217) No emissions Cobalt Neodecanoate 0.04% 0.0000
963LK217 Bel Air Gelcoat(963LK217) Gelcoat Application-MMA Methyl Methacrylate 5.75% 0.0450
963LK217 Bel Air Gelcoat(963LK217) Gelcoat Application Styrene 22.68% 0.1009
963RH333 Red Gelcoat(963RH333) Gelcoat Application-MMA Methyl Methacrylate 5.81% 0.0450
963RH333 Red Gelcoat(963RH333) Gelcoat Application Styrene 22.95% 0.1021
963YH582 Yellow Gelcoat(963YH582) Gelcoat Application-MMA Methyl Methacrylate 5.75% 0.0450
963YH582 Yellow Gelcoat(963YH582) Gelcoat Application Styrene 22.20% 0.0988
963YJ133 Fighting Yellow Gelcoat(963YJ133) Gelcoat Application-MMA Methyl Methacrylate 6.11% 0.0525
963YJ133 Fighting Yellow Gelcoat(963YJ133) Gelcoat Application Styrene 21.83% 0.0972
963YK140 Canary Yellow Gelcoat(963YK140) Gelcoat Application-MMA Methyl Methacrylate 5.58% 0.0450
963YK140 Canary Yellow Gelcoat(963YK140) Gelcoat Application Styrene 22.69% 0.1009
963YP008 Aztec Yellow Gelcoat(963YP008) No emissions Cobalt 2-Ethylhexanoate 0.15% 0.0000
963YP008 Aztec Yellow Gelcoat(963YP008) No emissions Cobalt Neodecanoate 0.03% 0.0000
963YP008 Aztec Yellow Gelcoat(963YP008) Gelcoat Application-MMA Methyl Methacrylate 5.40% 0.0450
963YP008 Aztec Yellow Gelcoat(963YP008) Gelcoat Application Styrene 24.10% 0.1072
963YP009 Orange Gelcoat(963YP009) No emissions Cobalt 2-Ethylhexanoate 0.15% 0.0000
963YP009 Orange Gelcoat(963YP009) No emissions Cobalt Neodecanoate 0.03% 0.0000
963YP009 Orange Gelcoat(963YP009) Gelcoat Application-MMA Methyl Methacrylate 5.22% 0.0450
963YP009 Orange Gelcoat(963YP009) Gelcoat Application Styrene 24.55% 0.1092
Page 5 of 7

Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical (%) N
967BK150 Black Barrier Coat(967BK150) Gelcoat Application Styrene 32.14% 0.1430
967BK150 Black Barrier Coat(967BK150) Gelcoat Application-MMA Vinyl Toluene 3.69% 0.0300
968WA79 White Gelcoat(968WA79) Gelcoat Application-MMA Methyl Methacrylate 3.00% 0.0225
968WA79 White Gelcoat(968WA79) Gelcoat Application Styrene 28.55% 0.1270
970C949 Polycor 8%Wax Solution(970C949) Manual Styrene 92.00% 0.2102
970X900 Patchaid(970X900) Manual Styrene 50.05% 0.0902
970XJ037 Patchaid(970XJ037) Manual Styrene 57.40% 0.1113
99MWK606 White Gelcoat(99MWK606) No emissions Cobalt 2-Ethylhexanoate 0.04% 0.0000
99MWK606 White Gelcoat(99MWK606) Gelcoat Application-MMA Methyl Methacrylate 2.00% 0.0150
99MWK606 White Gelcoat(99MWK606) Gelcoat Application Styrene 30.78% 0.1370
99MWP060 Ice Blue Gelcoat(99MWP060) No emissions Cobalt 2-Ethylhexanoate 0.02% 0.0000
99MWP060 Ice Blue Gelcoat(99MWP060) No emissions Cobalt Neodecanoate 0.02% 0.0000
99MWPO60 Ice Blue Gelcoat(99MWP060) Gelcoat Application-MMA Methyl Methacrylate 2.09% 0.0225
99MWP060 Ice Blue Gelcoat(99MWP060) Gelcoat Application Styrene 30.75% 0.1368
Dow733c Dow 733 Sealant,Clear N/A No reportable HAPs 0.00% 0.0000
Dow733w Dow 733 Sealant,White N/A No reportable HAPs 0.00% 0.0000
LSPA3201 Polyester Resin(LSPA3201) No emissions Cobalt 2-Ethylhexanoate 0.18% 0.0000
LSPA3201 Polyester Resin(LSPA3201) No emissions Cobalt Neodecanoate 0.05% 0.0000
LSPA3201 Polyester Resin(LSPA3201) Mechanical Non-Atomized Styrene 32.61% 0.0349
MA530 ITW Plexus Adhesive(MA530) MSDS Methyl Methacrylate 60.00% 0.0504
MA560 ITW Plexus Adhesive(MA560) MSDS Methyl Methacrylate 60.00% 0.0504
NONE1 3M Perfect It 05936 N/A No reportable HAPs 0.00% 0.0000
NONE12 Filler Bondo Manual Styrene 20.00% 0.0252
Page 6 of 7

Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical N (%)
NONE13 Adhesive(3M Super 77) N/A—assume all emitted n-Hexane 1.00% 0.0100
NONE15 Cleaner(HPP5) N/A No reportable HAPs 0.00% 0.0000
NONE2 3M Imperial 06044 N/A No reportable HAPs 0.00% 0.0000
NONE22 Aqua Blue 200 N/A No reportable HAPs 0.00% 0.0000
NONE5 Wax Honey(P5401520) N/A No reportable HAPs 0.00% 0.0000
RLPS1401 Stypol Resin(RLPS-1401) Mechanical Non-Atomized Styrene 33.62% 0.0370
Sika291 SIKAFLEX 291 N/A—assume all emitted Toluene 5.00% 0.0500
VSXH2522 VE Resin(VSXH2522) No emissions Cobalt 2-Ethylhexanoate 0.17% 0.0000
VSXH2522 VE Resin(VSXH2522) No emissions Cobalt Neodecanoate 0.05% 0.0000
VSXH2522 VE Resin(VSXH2522) Mechanical Non-Atomized Styrene 34.56% 0.0385
Page 7 of 7

1,91
Fountain Powerboats Washington Plant:Usage and VOC 8 HAPEmissions- - - ._YearEnding: December 2011
040-2989 Usage(gal): 5.0 VOC Content(wt%): 0.470 VOCs(lbs): 2.6
Stypol Tooling Resin(040-2989) Usage(lbs): 45.0 HAP Content(wt%): 0.470 HAPs(lbs): 2.6
Density(lb/gal): 8.95
CAS No Chemical Weight% E-Factor HAP Lbs
100-42-5 Styrene 47.03% 0.058 2.6
13706 Usage(gal): 5.0 VOC Content(wt%): 0.115 VOCs(Ibs): 7.0
AWLGARD Interior White Paint Usage(lbs): 61.3 HAP Content(wt%): 0.020 HAPs(Ibs): 1.2
(WT8202) Density(lb/gal): 12.25
CAS No Chemical Weight% E-Factor HAP Lbs
WA Glycol Ethers 2.00% 0.020 1.2
13706-ACT Usage(gal): 5.0 VOC Content(wt%): 0.094 VOCa(Ibs): 4.4
AWLGARD Converter(WT3201) Usage(Ibs): 46.6 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Density(lb/gal): 9.31
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.000h 0.000 0.0
13751 Usage(gal): 0.2 VOC Content(wt°/a): 0.700 VOCs(lbs): 1.7
Web Grip 175 Usage(Ibs): 2.4 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Density(lb/gal): 10.01
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.000/0 0.000 0.0
13864 Usage(gal): 0.3 VOC Content(wt%): 0.504 VOCs(Ibs): 1.3
Adhesive Integra Usage(Ibs): 2.5 HAP Content(wt°/): 0.504 HAPs(Ibs): 1.3
Density(Ib/gal): 8.88
CAS No Chemical Weight% E-Factor HAP Lbs
84-74-2 Dibutyl Phthalate 0.36% 0.004 0.0
80.62-6 Methyl Methacrylate 50.02% 0.500 1.2
14195 Usage(gal): 229.1 VOC Content(wt°/u): 0.000 VOCs(Ibs): 0.0
500-10.013 Usage(lbs): 1,930.0 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Density(lb/gal): 8.42
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.000/0 0.000 0.0
14195 ALT Usage(gal): 224.2 VOC Content(wt%): 0.000 VOCs(lbs): 0.0
Elastopor P14840R Usage(Ibs): 2,000.0 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Density(lb/gal): 8.92
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.000/0 0.000 0.0
0 Value Environmental 6/18/2012 Page 1 of 13

Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2011
14321 Usage(gal): 4,705.3 VOC Content(wt%): 0.343 VOCs(lbs): 1,435.3
Core-Bond B71 Adhesive Usage(lbs): 37,280.0 HAP Content(wt°/u): 0.343 HAPs(lbs): 1,435.3
Density(lb/gal): 7.92
CAS No Chemical Weight% E-Factor HAP Lbs
100-42-5 Styrene 34.30% 0.039 1,435.3
1446 1 Usage(gal): 5.01 VOC Content(wt%): 0.394 VOCs(lbs): 9.2
Armorcoate Yellow Gelcoat Usage(lbs): 48.0 HAP Content(wt%): 0.402 HAPs(lbs): 9.6
(951 YA596) Density(Ib/gal): 9.59
CAS No Chemical Weight% E-Factor HAP Lbs
80-62-6 Methyl Methacrylate 8.800/0 0.060 2.9
100-42-5 Styrene 31.35% 0.140 6.7
14540 Usage(gal): 46.9 VOC Content(wt%): 0.301 VOCs(lbs): 79.2
Pitch Black Gelcoat(963BA025) Usage(lbs): 500.0 HAP Content(wt%): 0.301 HAPs(lbs): 79.2
Density(lb/gal): 10.65
CAS No Chemical Weight% E-Factor HAP Lbs
80-62-6 Methyl Methacrylate 6.29% 0.053 26.3
100-42-5 Styrene 23.80% 0.106 53.0
1500009 Usage(gal): 10.0 VOC Content(wt%): 0.356 VOCs(lbs): 38.6
Gray Sand Priner(707-007X) Usage(lbs): 108.4 HAP Content(wt%): 0,221 HAPs(lbs): 24.0
Density(Ib/gal): 10.84
CAS No Chemical Weight% E-Factor HAP Lbs
141-78-6 Ethyl Acetate 2.00% 0.020 2.2
78-93-3 Methyl Ethyl Ketone 11.500/a 0.115 12.5
100-42-5 Styrene 22.10% 0.221 24.0
1500110 Usage(gal): 608.5 VOC Content(wt%): 0.360 VOCs(lbs): 78.3
Hi Point 90 Red(MEKP) Usage(lbs): 5,440.0 HAP Content(wt%): 0.360 HAPs(lbs): 76.3
Density(lb/gal): 8.94
CAS No Chemical Weight% E-Factor HAP Lbs
131-11-3 Dimethyl Phthalate 36.00% 0.014 78.3
1500230m Usage(gal): 10.5 VOC Content(wt%): 0.388 VOCs(lbs): 19.6
Black Tooling Gelcoat Usage(lbs): 95.0 HAP Content(wt%): 0.388 HAPs(lbs): 19.6
(965B.1115) Density(lb/gal): 9.09
CAS No Chemical Weight% E-Factor HAP Lbs
67-56-1 Methyl Alcohol 0.72% 0.007 0.7
100.42-5 Styrene 38.07% 0.199 18.9
1500500 Usage(gal): 945.0 VOC Content(wt0k): 0.316 VOCs(Ibs): 191.8
Core-Bond B70 Adhesive Usage(lbs): 5,674.5 HAP Content(wt%): 0.316 HAPs(lbs): 191.8
Density(lb/gal): 6.00
CAS No Chemical Weight% E-Factor HAP Lbs
100.42-5 Styrene 31.60% 0.034 191.8
©Value Environmental 6/18/2012 Page 2 of 13

Fountain Powerboats Washington Plant:Usage and VOC 8:HAP Emissions Year Ending: December 2011
1500605 Usage(gal): 161.7 VOC Content(wt%): 0.000 VOCs(lbs): 0.0
Foam(Elastopor P1001u) Usage(lbs): 1,653.0 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Density(lb/gal): 10.22
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.008/0 0.000 0.0
1570 Usage(gal): 1.0 VOC Content(wt%): 1.000 VOCs(lbs): 6.4
ANTI-STATIC FINAL WIPE Usage(lbs): 6.4 HAP Content(wt%): 0.010 HAPs(lbs): 0.1
Density(Ib/gal): 6.36
CAS No Chemical Weight% E-Factor HAP Lbs
108-88-3 Toluene 1.00% 0 010 0.1
1675 Usage(gal): 1.5 VOC Content(wt%): 0.638 VOC3(lbs): 8.0
3M Rnesse It#05928 Usage(Ibs): 12.5 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Density(lb/gal): 8.34
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.00% 0.000 0.0
1700a Usage(gal): 1.3 VOC Content(wt%): 0.358 VOCs(Ibs): 5.5
Sealer Usage(Ibs): 15.4 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Density(lb/gal): 12.32
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.00% 0.000 0.0
2476 Usage(gal): 123.5 VOC Content(wt%): 0.360 VOCs(lbs): 15.9
Hi Point 90 Clear(MEKP) Usage(Ibs): 1,104.0 HAP Content(wt%): 0.360 HAPs(lbs): 15.9
Density(lb/gal): 8.94
CAS No Chemical Weight% E-Factor HAP Lbs
131-11-3 Dime"Phthalate 36.00% 0014 15.9
2817 Usage(gal): 4.0 VOC Content(wt%): 0.356 VOCs(Ibs): 15.4
Gray Sand Prirner(707-007X) Usage(Ibs): 43.4 HAP Content(wt°/6): 0.221 HAPs(Ibs): 9.6
Density(Ib/gal): 10.84
CAS No Chemical Weight% E-Factor HAP Lbs
141-78-6 Ethyl Acetate 2.00% 0.020 0.9
78.93-3 Methyl Ethyl Ketone 11.50% 0.115 5.0
100-42-5 Styrene 22.10% 0.221 9.6
3525 Usage(gal): 2.0 VOC Content(wt%): 0.478 VOCs(Ibs) 8.1
Clear Hi-Gloss Additive(904- Usage(lbs): 17.0 HAP Content(wt%): 0.336 HAPs(Ibs): 5.7
001X) Density(Ib/gal): 8.51
CAS No Chemical Weight% E-Factor HAP Lbs
78-93-3 Methyl Ethyl Ketone 14.200/6 0.142 2.4
100-42-5 Styrene 33.60% 0.336 5.7
©Value Environmental 6/1 812 0 1 2 Page 3 of 13

Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions Is, Year Ending: December 2011
3895 Usage(gal): 25.0 VOC Content(wt°/u): 0.200 VOCs(lbs): 4114
BPO/5 Paste Catalyst Usage(lbs): 241.9 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 9.67
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.0D% 0.000 0.0
4324 Usage(gal): 842.4 VOC Content(wt%): 0.4001 1 VOCs(lbs): 1,939.9
Polycor White Gelcoat Usage(lbs): 8,838.0 HAP Content(wt%): 0.4001 1 HAPs(lbs): 1,939.9
(948WJ201) Density(lb/gal): 10.49
CAS No Chemical Weight% E-Factor HAP Lbs
100-42-5 Styrene 40.00% 0.220 1,939.9
435 Usage(gal): 13.1 VOC Content(wt 6 0.020 VOCs(Ibs): 2.9
Marine Sealant Fast Cure 5200 Usage(lbs): 145.6 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Density(Iblgal): 11.09
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.00% 0.000 0.0
4629 Usage(gal): 18.8 VOC Content(we/6): 0.508 1 1 VOCs(lbs): 75.8
Clear Coats Usage(lbs): 149.3 HAP Content(wt%): 0.7601 1 HAPs(lbs): 113.4
Density(lb/gal): 7.95
CAS No Chemical Weight% E-Factor HAP Lbs
100-41-4 Ethylbenzene 5.00"/u 0.050 7.5
108-10-1 Methyl Isobutyl Ketone 20.000/9 0.200 29.9
100.42-5 Styrene 1.00% 0.010 1.5
108-88-3 Toluene 10.00% 0.100 14.9
1330-20-7 Xylene(mixed Isomers 40.00°/a 0.400 59.7
4630 Usage(gal): 7.5 VOC Content(wt%): 1.000 VOCs(lbs): 51.9
Reducers Usage(lbs): 51.9 HAP Content(wt%): 0.460 HAPs(lbs): 23.9
Density(lb/gal): 6.91
CAS No Chemical Weight% E-Factor HAP Lbs
100-41-4 Ethylbenzene 1.00% 0.010 0.5
78-93-3 Methyl Ethyl Ketone 40.00% 0.400 20.7
110-54-3 n-Hexane 5.00% 0.050 2.6
108-88-3 Toluene 30.00% 0.300 15.6
1330-20.7 Xylene(mixed isomers 10.00% 0.100 5.2
0 Value Environmental 6/18/2012 Page 4 of 13

Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2011
4631 Usage(gal): 16.1 VOC Content(wt%): 0.860 VOCs(Ibs): 118.0
DeBron 2000 Basecoals Usage(Ibs): 137.2 HAP Content(wt%): 0.760 HAPs(Ibs): 104.3
Density(lb/gal): 8.51
CAS No Chemical Weight% E-Factor HAP Lbs
95-63.6 1,2,4-Tdmethylbenzen 5.00% 0.050 6.9
112-07-2 2-Butoxyethyl Acetate 5.000/0 0.050 6.9
100-41-4 Ethylbenzene 5.00% 0.050 6.9
78-93-3 Methyl Ethyl Ketone 20.00% 0.200 27A
108-10-1 Methyl Isobutyl Ketone 20.00% 0.200 27A
71-36-3 N-Butyl Alcohol 20.00% 0.200 27A
N/A Nickel Compounds 1.000%o 0.010 1A
108-88-3 Toluene 30.00% 0.300 41.2
1330-20-7 Xylene(mixed isomers 20.00% 0.200 27A
4635a Usage(gal): 6.0 VOC Content(we/,): 0.161 VOCs(lbs): 8.6
DCX Hardener Usage(Ibs): 53.7 HAP Content(wt%): 0.010 HAPs(Ibs): 0.5
Density(lb/gal): 8.96
CAS No Chemical Weight% E-Factor HAP Lbs
822-06-0 Hexamethylene diisoc 1.00% 0.010 0.5
409&71-9 Isophorone Diisocyan 1.000/0 0.010 0.5
4635c Usage(gap: 1.3 VOC Content(wt*/u): 0.583 VOCs(Ibs): 5.9
Primer Surface Catalyst(K201) Usage(Ibs): 10.2 HAP Content(wt%): 0.110 HAPs(Ibs): 1.1
Density(lb/gal): 8.15
CAS No Chemical Weight% E-Factor HAP Lbs
141-78-6 Ethyl Acetate 10.00% 0.100 1.0
822-06-0 Hexamethylene diisoc 1.00% 0.010 0.1
108-88-3 Toluene 10.00% 0.100 1.0
4923 Usage(gal): 42.0 VOC Content(wt%): 0.300 VOCs(Ibs): 13.2
Laminex Fillet Usage(Ibs): 350.3 HAP Content(wt%): 0.300 HAPs(Ibs): 13.2
Density(lblgal): 8.34
CAS No Chemical Weight% E-Factor HAP Lbs
100-42-5 Styrene 30.00% 0.038 13.2
519 Usage(gal): 1,430.0 VOC Content(wt%): 0.244 VOCs(Ibs): 402.7
Poly-Bond B39 Adhesive Usage(Ibs): 13,118.8 HAP Content(wt%): 0.244 HAPs(Ibs): A02.7
Density(lb/gal): 9.17
CAS No Chemical Weight% E-Factor HAP Lbs
100-42-5 Styrene 24.40% 0.031 402.7
5221010 Usage(gal): 18.3 VOC Content(wt%): 0.082 VOCs(Ibs) 14.8
Sika8ex291,White Usage(Ibs): 181.4 HAP Content(wt%): 0.050 HAPs(Ibs): 9.1
Density(lb/gal): 9.92
CAS No Chemical Weight% E-Factor HAP Lbs
1330-20-7 Xylene(mixed Isomers 5.000/6 0.050 9.1
0 Value Environmental 6/18/2012 Page 5 of 13

Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2011
647A Usage(gal): 72.4 VOC Content(wt%): 0.000 VOCs(lbs): 0.0
Polyurethane Foam Part A Usage(lbs): 748.8 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 10.34
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.00% 0.000 0.0
647E Usage(gal): 71.1 VOC Content(wt%): 0.000 VOCs(lbs): 0.0
Polyurethane Foam Part B Usage(lbs): 711.4 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(Ib/gal): 10.01
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.000/0 0.000 0.0
6586 Usage(gal): 2.5 VOC Content(wt°/a): 0.011 VOCs(lbs): 0.3
3M Marine Sealant Fast Cure Usage(lbs): 29.6 HAP Content(wt"/u): 0.000 HAPs(lbs): 0.0
4000 Density(lb/gal): 11.68
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.000/0 0.000 0.0
8027 Usage(gal): 12.0 VOC Content(wt%): 0.034 VOCs(lbs): 3.5
3M Marine Silicone Sealant Usage(lbs): 102.1 HAP Content(wt°/u): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 8.51
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.00% 0.000 0.0
865 Usage(gal): 5.6 VOC Content(wt%): 0.050 VOCs(lbs): 3.0
SikaOex 221,Black Usage(lbs): 59.6 HAP Content(wt%): 0.050 HAPs(Ibs): 3.0
Density(Ib/gal): 10.59
CAS No Chemical Weight% E-Factor HAP Lbs
1330.20.7 Xylem(mixed isomers 5.00% 0.050 3.0
8664 Usage(gal): 1.2 VOC Content(wt%): 0.100 VOCs(lbs): 1.0
3M Super Silicone Sealant Usage(lbs): 10.4 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 8.67
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.00% 0.000 0.0
8929 Usage(gal): 6.0 VOC Content(wt%): 0.150 VOCs(lbs): 12.8
AOTECH White Resin(#14 Usage(lbs): 85.6 HAP Content(wt%): 0.150 HAPs(lbs): 12.8
Ultra) Density(Ib/gal): 14.26
CAS No Chemical Weight% E-Factor HAP Lbs
100.42-5 Styrene 15.000/a 0.150 12.8
0 Value Environmental 6/18/2012 Page 6 of 13

Fountain Powerboats Washington Plant:Usage and VOC 8.HAP Emissions Swear Ending: December 2011
9427 Usage(gal): 13.0 VOC content(wt%): 1.000 1 1 VOCs(lbs): 91.0
Kantstick Maxi Pull Usage(lbs): 91.0 HAP Content(wt%): 0.580 HAPs(lbs): 52.8
Density(Ib/gal): 7.00
CAS No Chemical Weight% E-Factor HAP Lbs
98-82-8 Cumene 3.00% 0.030 2.7
100-41-4 Ethylbenzene 5.00% 0.050 4.6
1330-20-7 Xylene(mixed isomers 50.00% 0.500 45.5
945CJ007 Usage(gal): 170.0 VOC Content(wV/u): 0.497 VOCs(lbs): 482.4
Tool Thinner(945CJ007) Usage(lbs): 1,510.0 HAP Content(wt%): 0.497 HAPs(lbs): 482.4
Density(Ib/gal): 8.88
CAS No Chemical Weight% E-Factor HAP Lbs
80.62-6 Methyl Methacrylate 4.50% 0.038 56.6
100-42-5 Styrene 45.23% 0.282 425.8
951RA699 Usage(gal): 183.8 VOC Content(wt°/9): 0.402 VOCs(lbs): 351.9
Candy Apple Gelcoat Usage(lbs): 1,735.0 HAP Content(wt%): 0.402 HAPs(lbs): 351.9
(951RA699) Density(lb/gal): 9.44
CAS No Chemical Weight% E-Factor HAP Lbs
80-62-6 Methyl Methacrylate 8.06% 0.060 104.1
100-42-5 Styrene 32.09% 0.143 247.8
953WJ301 Usage(gal): 27.4 VOC Content(wt^/,): 0.341 VOCs(lbs): 49.2
Base White Gelcoat(953WJ301) Usage(lbs): 295.0 HAP Content(wt%): 0.341 HAPs(lbs): 49.2
Density(Ib/gal): 10.78
CAS No Chemical Weight% E-Factor HAP Lbs
80-62-6 Methyl Methacrylate 5.00% 0.038 11.1
100.42-5 Styrene 29.06% 0.129 38.1
954AH187 Usage(gal): 53.1 VOC Content(wt%): 0.3981 1 VOCs(lbs): 116.0
Light Gray Gelcoat(954AH187) Usage(lbs): 538.0 HAP Content(wt%): 0.398 HAPs(lbs): 115.9
Density(lb/gal): 10.13
CAS No Chemical Weight% E-Factor HAP Lbs
80-62-6 Methyl Methacrylate 4.39% 0.038 20.2
100-42-5 Styrene 35.36% 0.178 95.8
963AK218 Usage(gal): 4.7 VOC Content(wt%): 0.3091 1 VOCs(Ibs): 8A:
Silver Gelcoat(963AK218) Usage(lbs): 50.o HAP Content(wt%): 0.301 HAPs(lbs): 7.8
Density(ib/gai): 10.63
CAS No Chemical Weight% E-Factor HAP Lbs
80-62-6 Methyl Methacrylate 6.27% 0.053 2.6
10042-5 Styrene 23.79% 0.106 5.3
Value Environmental 6/18/2012 Page 7 of 13

,,, ..,y -'u A` ,'4 r , �'.I. , k a
in .owet1 Washington ant: sage nd VOA missionshearndmepemer 071
963GK131 Usage(gat): 153.3 VOC Content(wt%): 0.284 VOCs(lbs): 358.9
HAP33 Sea Foam Gelcoat Usage(lbs): 1,693.0 HAP Content(wt%): 0.284 HAPs(lbs): 358.9
(963GK131) Density(Ib/gal): 11.04
CAS No Chemical Weight% E-Factor HAP Lbs
80-62-6 Methyl Melhacrylale 6.16% 0.049 83.0
100-42-5 Styrene 22.23% 0.163 276.0
9631A507 Usage(gal): 75.1 VOC Content(wt%): 0.274 VOCs(lbs): 119.7
Seattle Grey Gelcoat(9631A507) Usage(lbs): 841.0 HAP Content(wt%): 0.274 HAPs(lbs): 119.7
Density(lb/gal): 11.19
CAS No Chemical Weight% E-Factor HAP Lbs
80-62-6 Methyl Methacrylate 5.56% 0.045 37.8
100-42-5 Styrene 21.87% 0.097 81.8
963L281 Usage(gal): 123.5 VOC Content(wt%): 0.288 VOCs(lbs): 214.0
Carolina Blue Gelcoat(963L281) Usage(lbs): 1,365.2 HAP Content(wt%): 0.281 HAPs(lbs): 2052.
Density(Iblgal): 11.05
CAS No Chemical Weight% E-Factor HAP Lbs
80-62-6 Methyl Methacrylate 6.14% 0.053 71.7
100-42-5 Styrene 21.99% 0.098 133.6
963LA855 Usage(gal): 99.2 VOC Content(wt%): 0.284 VOCs(lbs): 154.3
Cobalt Gelcoat(963LA855) Usage(lbs): 1,060.0 HAP Content(wt%): 0.284 HAPs(lbs): 154.2
Density(lb/gal): 10.68
CAS No Chemical Weight% E-Factor HAP Lbs
80-62-6 Methyl Methacrylate 5.83% 0.045 47.7
100-42-5 Styrene 22.58% 0.101 106.5
963LA860 Usage(gal): 9.4 VOC Content(wt%): 0.285 VOCs(lbs): 14.8
True Blue Gelcoat(963LA860) Usage(lbs): 100.0 HAP Content(wt%): 0.286 HAPs(lbs): 14.8
Density(Iblgal): 10.66
CAS No Chemical Weight% E-Factor HAP Lbs
80-62-6 Methyl Methacrylate 5.38% 0.045 4.5
100-42-5 Styrene 23.17% 0.103 10.3
963LA862 Usage(gal): 80.5 VOC Content(wt%): 0.280 VOCs(lbs): 123.1
Midnight Gelcoat(963LA862) Usage(lbs): 853.0 HAP Content(wt%): 0.280 HAPs(lbs): 123.2
Density(lb/gal): 10.59
CAS No Chemical Weight% E-Factor HAP Lbs
80-62-6 Methyl Methacrylate 5.63% 0.045 38.4
100-42-5 Styrene 22.34% 0.099 84.8
0 Value Environmental 6/18/2012 Page 8 of 13

Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 201
963LK217 Usage(gal): 32.5 VOC Content(wt%): 0.299 VOCs(lbs): 55.5
Bel Air Gelcoat(963LK217) Usage(lbs): 350.0 HAP Content(wt°/a): 0.284 HAPs(lbs): 91.1
Density(Iblgal): 10.76
CAS No Chemical Weight% E-Factor HAP Lbs
136-52-7 Cobalt2-Ethyhexanoa 0.15% 0.000 0.0
27253-31-2 Cobalt Neodecanoate 0.04% 0.000 0.0
80-62.6 Methyl Methacrylate 5.75% 0.045 15.8
100.42-5 Styrene 22.68% 0.101 35.3
963RH333 Usage(gal): 928.5 VOC Content(wt%): 0.288 VOCs(lbs): 1,452.4
Red Gelcoat(963RH333) Usage(lbs): 9,873.0 HAP Content(wt%): 0.288 HAPs(lbs): 1,452.4
Density(Ib/gal): 10.63
CAS No Chemical Weight% E-Factor HAP Lbs
80-62-6 Methyl Methacrylate 5.81% 0.045 444.3
100-42-5 Styrene 22.95% 0.102 1,008.1
963YH582 Usage(gal): 27.5 VOC Content(wV/a): 0.279 VOCs(lbs): 42.7
Yellow Gelcoat(963YH582) Usage(lbs): 297.0 HAP Content(wt%): 0.280 HAP9(lbs): 42.7
Density(Ib/gal): 10.80
CAS No Chemical Weight% E-Factor HAP Lbs
80-62-6 Methyl Methacrylate 5.75% 0.045 13A
100-42-5 Styrene 22.20% 0.099 29.3
963YJ133 Usage(gal): 26.8 VOC Content(cat°/,): 0.279 VOCs(Ibs): 44.4
Fighting Yellow Gelcoat Usage(lbs): 297.0 HAP Content(wt"/o): 0.279 HAPs(lbs): 44.4
(963YJ133) Density(Ib/gal): 11.08
CAS No Chemical Weight% E-Factor HAP Lbs
80-62-6 Methyl Methacrylate 6.11% 0.053 15.6
100-42-5 Styrene 21,83% 0.097 28.9
963YK140 Usage(gal): 53.9 VOC Content(wt%): 0.283 VOCs(lbs): $3.9
Canary Yellow Gelcoat Usage(lbs): 575.0 HAP Content(wt%): 0.283 HAPs(lbs): 93.9
(963YK140) Density(Ib/gal): 10.66
CAS No Chemical Weight% E-Factor HAP Lbs
80-62.6 Methyl Methacrylate 5.58% 0.045 25.9
100-42-5 Styrene 22.69% 0.101 58.0
963YP008 Usage(gal): 27.0 VOC Content(wt%): 0.310 VOCs(lbs): 47.2
Aztec Yellow Gelcoat Usage(lbs): 286.0 HAP Content(wt%): 0.295 HAPs(lbs): 43.5
(963YP008) Density(lb/gal): 10.58
CAS No Chemical Weight% E-Factor HAP Lbs
136-52-7 Cobalt2-Ethyhexanoa 0.15% 0.000 0.0
27253-31-2 Cobalt Neodecanoate 0.03% 0.000 0.0
80.62-6 Methyl Methacrylate 5.40% 0.045 12.9
100-42-5 Styrene 24.10% 0.107 30.7
©Value Environmental 6/1 812 01 2 Page 9 of 13

Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2011
963YP009 Usage(gat): 27.7 VOC Content(wt%): 0.314 VOCs(lbs): 49.0
Orange Gekoat(963YP009) Usage(lbs): 290.6 HAP Content(wt%): 0.298 HAPs(lbs): 44.8
Density(Iblgal): 10.48
CAS No Chemical Weight% E-Factor HAP Lbs
136-52-7 Cobalt 2-Ethyhexanoa 0.15% 0.000 0.0
27253-31-2 Cobalt Neodecanoate 0.03% 0.000 0.0
80-62.6 Methyl Methacrylate 5.22% 0.045 13.1
100.42-5 Styrene 24.55% 0.109 31.7
967BK150 Usage(gal): 105.4 VOC Content(cat°h): 0.364 VOCs(ibs): 182.9
Black Barrier Coat(967BK150) Usage(lbs): 1,023.0 HAP Content(wtV°): 0.321 HAPs(lbs): 146.3
Density(Ib/gal): 9.71
CAS No Chemical Weight% E-Factor HAP Lbs
100-42-5 Styrene 32.14% 0.143 146.3
25013-15.4 Vinyl Toluene 3.69% 0.030 30.7
968WA79 Usage(gal): 547.8 VOC Content(wt%): 0.317 1 VOCs(lbs): 976.6
White Gelcoat(968WA79) Usage(lbs): 6,480.0 HAP Content(wt%): 0.315 HAPs(lbs): 969.0
Density(Ib/gal): 11.83
CAS No Chemical Weight% E-Factor HAP Lbs
8"2-6 Methyl Methacrylate 3.00% 0.023 145.8
100-42-5 Styrene 28.55% 0.127 823.2
970CS49 Usage(gal): 9.o VOC Content(wt%): 0.920 VOCs(lbs): 14.1
Polycor 8%Wax Solution Usage(lbs): 67.2 HAP Content(wt%): 0.920 HAPs(Ibs): 14.1
(970C949) Density(Ib/gal): 7.46
CAS No Chemical Weight% E-Factor HAP Lbs
100-42-5 Styrene 92.000/6 0.210 14.1
970X900 Usage(gal): 22A VOC Content(wt%): 0.515 VOCs(Ibs): 20.7
Patchaid(970X900) Usage(lbs): 197.5 HAP Content(wt%): 0.500 HAPs(lbs): 47.8
Density(lb/gal): 8.81
CAS No Chemical Weight% E-Factor HAP Lbs
100.42-5 Styrene 50.05% 0.090 17.8
970XJ037 Usage(gal): 39.2 VOC Content(wt%): 0.583 VOCs(Ibs): 40.4
Patchaid(970XJ037) Usage(lbs): 335.1 HAP Content(wt%): 0.574 HAPs(lbs): 37.3
Density(Ib/gal): 8.56
CAS No Chemical Weight% E-Factor HAP Lbs
100-42-5 Styrene 57.40% 0.111 37.3
©Value Environmental 6/18/2012 Page 10 of 13
1

Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2011
99MWK606 Usage(gal): 2085.7 VOC Content(wt%): 0.336 VOCs(Ibs): 3,766.1
White Gelcoat(99MWK606) Usage(lbs): 231567.0 HAP Content(wt%): 0.328 HAPs(lbs): 3,581.4
Density(Ib/gal): 11.30
CAS No Chemical Weight% E-Factor HAP Lbs
136.52-7 Cobalt2-Ethyhexanoa 0.04"/a 0.000 0.0
8"2-6 Methyl Melhacrylale 2.00% 0.015 353.5
100-42-5 Styrene 30.78% 0.137 3,227.9
99MWP060 Usage(gal): 56.8 VOC Content(wt°/u): 0.337 VOCs(Ibs): 107.2
Ice Blue Gelcoat(99MWP060) Usage(lbs): 640.8 HAP Content(wt°/u): 0.328 HAPs(lbs): 102.1
Density(lb/gal): 11.28
CAS No Chemical Weight% E-Factor HAP Lbs
136-52-7 Cobalt2-Ethyhexanoa 0.02% 0.000 0.0
27253-31-2 Cobalt Neodecanoate 0.02% 0.000 0.0
80.62-6 Methyl Methacrylate 2.09% 0.023 14.4
100-42-5 Styrene 30.75% 0.137 87.7
Dow733c Usage(gal): 22.0 VOC Content(wt%): 0.1001 VOCs(lbs): 19.1
Dow 733 Sealant,Clear Usage(lbs): 190.9 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 8.67
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.00% 0.000 0.0
Dow733w Usage(gal): 26.5 VOC Content(wt%): 0.100 VOCs(Ibs): 23.0
Dow 733 Sealant,While Usage(Ibs): 230.0 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Density(Ib/gal): 8.67
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.00% 0.000 0.0
LSPA3201 Usage(gal): 26,879.0 VOC Content(wV/u): 0.350 VOCs(lbs): 13,420.7
Polyester Resin(LSPA3201) Usage(lbs): 239,000.0 HAP Content(wt%): 0.326 HAPs(lbs): 8.339-1
Density(lb/gal): 8.89
CAS No Chemical Weight% E-Factor HAP Lbs
136-52-7 Cobalt2-Ethyhexanoa 0.18% 0.000 0.0
27253-31-2 Cobalt Neodecanoate 0.05% 0.000 0.0
100-42-5 Styrene 32.61% 0.035 8,339.1
MA530 Usage(gal): 88.1 VOC Content(wt°/a): 0.624 VOCs(lbs): 54.0
ITW Plexus Adhesive(MA530) Usage(Ibs): 727.7 HAP Content(wt%): 0.600 HAPs(lbs): 36.7
Density(lb/gal): 8.26
CAS No Chemical Weight% E-Factor HAP Lbs
80-62-6 Methyl Methacrylale 60.00% 0.050 36.7
©Value Environmental 6/18/2012 Page 11 of 13

o tita owe ash n an sage nd OC 'LIE
s o s ' ar i g. ecember 0
t
MA560 Usage(gal): 1,258.0 VOC Content(wt%): 0.624 VOCs(Ibs): 770.3
ITW Plexus Adhesive(MA560) Usage(Ibs): 10,386.8 HAP Content(wt%): 0.600 HAPs(Ibs): 523.7
Density(Ib/gal): 8.26
CAS No Chemical Weight% E-Factor HAP Lbs
80-62-6 Methyl Methacryiate 60.00% 0.050 523.7
NONE1 Usage(gal): 1.0 VOC Content(wt%): 0.433 VOCs(Ibs): 3.7
3M Perfect It 05936 Usage(Ibs): 8.5 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Density(Ib/gal): 8.51
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.00% 0.000 0.0
NONE12 Usage(gal): 43.0 VOC Content(wt%): 0.200 VOCs(Ibs): 10.4
Filler Bondo Usage(Ibs): 412.4 HAP Content(wt%): 0.200 HAPs(Ibs): 10.4
Density(lb/gal): 9.59
CAS No Chemical Weight% E-Factor HAP Lbs
100-42-5 Styrene 20.00% 0.025 10.4
NONE13 Usage(gal): 27.2 VOC Content(wt%): 0.750 VOCs(Ibs): 118.5
Adhesive(3M Super 77) Usage(Ibs): 158.0 HAP Content(wt%): 0.010 HAPs(Ibs): 1.6
Density(Ib/gal): 5.81
CAS No Chemical Weight% E-Factor HAP Lbs
110-54-3 n-Hexane 1.00% 0.010 1.6
NONE15 Usage(gal): 110.0 VOC Content(wt%): 0.175 VOCs(Ibs): 163.8
Cleaner(HPP5) Usage(Ibs): 935.7 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 8.51
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.00% 0.000 0.0
NONE2 Usage(gal): 38.8 VOC Content(wt%): 0.660 VOCs(Ibs): 268.9
3M Imperial 06044 Usage(Ibs): 407.2 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Density(lb/gal): 10.51
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.00% 0.000 0.0
NONE22 Usage(gal): 26.0 VOC Content(wt%): 0.350 VOCs(Ibs): 75.9
Aqua Blue 200 Usage(Ibs): 216.8 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Density(lb/gal): 8.34
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.00% 0.000 0.0
NONES Usage(gal): 70.0 VOC Content(wt%): 0.700 VOCs(Ibs): 343.4
Wax Honey(P5401520) Usage(Ibs): 490.4 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Density(Ib/gal): 7.01
CAS No Chemical Weight% E-Factor HAP Lbs
No reportable HAPs 0.00% 0.000 0.0
©Value Environmental 6/18/2012 Page 12 of 13

Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2011
RLPS1401 Usage(gal): 54.7 VOC Content(wt%): 0.336 VOCs(lbs): 18.5
Stypol Resin(RLPS-1401) Usage(lbs): 500.0 HAP Content(wt%): 0.336 HAPs(lbs): 18.5
Density(lb/gal): 9.15
CAS No Chemical Weight% E-Factor HAP Lbs
100.42-5 Styrene 33.62% 0.037 18.5
Sika291 Usage(gal): 3.9 VOC Content(wt%): 0.082 VOCs(lbs): 3.1
SIKAFLEX 291 Usage(lbs): 38.3 HAP Content(wt%): 0.050 HAPs(lbs): 1.9
Density(Ib/gal): 9.92
CAS No Chemical Weight% E-Factor HAP Lbs
108-88-3 Toluene 5.00% 0.050 1.9
VSXH2522 Usage(gal): 19,879.E VOC Content(wt°/o): 0.358 VOCs(lbs): 8,857.2
VE Resin(VSXH2522) Usage(lbs): 181,220.0 HAP Content(wt%): 0.346 HAPs(lbs): 6,977.0
Density(Ib/gal): 9.12
CAS No Chemical Weight% E-Factor HAP Lbs
136-52-7 Cobalt 2-Ethyhexanoa 0.17% 0.000 0.0
27253-31-2 Cobalt Neodecanoate 0.05% 0.000 0.0
100.42-5 Styrene 34.56% 0.039 6,977.0
Month(Ibs) Month(tons)
VOCs: 37,748 18.87
HAPs: 29,074 14.54
©Value Environmental 6/18/2012 Page 13 of 13
1

CAS No Chemical Emissions (lbs) Emissions (tons)
HAP?
98-82-8 Cumene 2.7 0.00
84-74-2 Dibutyl Phthalate 0.0 0.00
131-11-3 Dimethyl Phthalate 94.2 0.05
100-41-4 Ethylbenzene 19.4 0.01
N/A Glycol Ethers 1.2 0.00
822-06-0 Hexamethylene diisocyanate 0.6 0.00
67-56-1 Methyl Alcohol 0.7 0.00
108-10-1 Methyl Isobutyl Ketone 57.3 0.03
80-62-6 Methyl Methacrylate 2,123.0 1.06
110-54-3 n-Hexane 4.2 0.00
N/A Nickel Compounds 1.4 0.00
No reportable HAPs 0.0 0.00
100-42-5 Styrene 26,544.8 13.27
108-88-3 Toluene 74.6 0.04
1330-20-7 Xylene(mixed isomers) 149.9 0.07
Subtotal 29,074 14.54
HAP? 1
141-78-6 Ethyl Acetate 4.1 0.00
78-93-3 Methyl Ethyl Ketone 68.0 0.03
Subtotal 72 0.04
Total 29,146 14.57
©Value Environmental 6/18/2012 Page 1 of 1