AQ_F_2100073_20100630_EI_Fac-EI-Rpt

REGULAT, DRI
THE FINEST IN OFFSHORE SPORTFISHING BOATS
June 28, 2010 /�13/°
Mr. Robert Fisher, Regional Supervisor
North Carolina Department of Environmental and Natural Resources
Washington Regional Office
943 Washington Square Mall
Washington, NC, 27889
Subject: CY2009 Annual Point Source Emission Inventory
Regulator Marine, Inc.
Facility ID: 2100073
Dear Mr. Fisher:
Regulator Marine, Inc. is a reinforced fiberglass boat manufacturing facility operating under Title V
permit number 07132T09 and is required to submit an inventory report of actual emissions of regulated
compounds to the North Carolina Division of Air Quality (DAQ) by June 30 each year for the previous
year's actual air pollutant emissions. The report has been submitted electronically to the DAQ via the
Air Emissions Reporting Online (AERO) reporting tool to meet the June 30, 2010 reporting deadline
for the calendar year (CY) 2009 emissions. Enclosed with this letter are the supporting emission rate
calculations and signed certification. The emission estimates have been developed using actual 2009
material usage, operating times, and approved emissions factors.
Emissions have from a diesel-fired emergency/peak generator operated by ElectriCities are not reported
this as the unit did not operate in 2009.
The following is a summary of the enclosed supporting inventory documents:
1. Signed Emission Inventory Certification
2. Emissions Summary Table
3. CY 2009 Material Usage and Calculation Spreadsheets
Please contact me at [phone] with any questions concerning the information contained herein.
Sincerely,
,> --
Erik
Encl.
D TT
WARO COPY
FLI JUN 3 0 2010
----1-8"eanvt riv-d, Edenton, North Carolina 27932 • 252-482-3837 • www.regulatormarine.com

SIGNED EMISSION INVENTORY CERTIFIFICATION

Inventory Certification Form(Title V)
Facility Name: Regulator Marine Inc Facility ID : 2100073
187 Peanut Drive Permit : 07132
Edenton,NC 27932 County : Chowan
DAQ Region : WARO
North Carolina Department of Environment and Natural Resources
Division of Air Quality
Air Pollutant Point Source Emissions Inventory—Calendar Year 2009
These forms must be completed and returned even if the facility did not operate or emissions were zero
The legally defined "Responsible Official" of record for your facility is Erik Wiborg
This person or one that meets the definition below must sign this certification form.
The official submitting the information must certify that he/she complies with the requirements as specified in Title 15A
NCAC 2Q.0520(b)which references and follows the federal definition.40 CFR Part 70.2 defines a responsible as meaning one
of the following:
1. For a corporation: a president, secretary,treasurer,or vice—president of the corporation in charge of a principal
business function, or any other person who performs similar policy or decision making functions for the overall
operation of one or more manufacturing,production,or operating facilities applying for a or subject to a pen-nit and
either
i. the facilities employ more than 250 persons or have gross annual sales or expenditures exceeding$25
million(in second quarter 1980 dollars); or
ii.the delegation of authority to such representatives is approved in advance by the permitting authority;
2. For partnership or sole propietorship; a general partner or the proprietor,respectively;
3. for a muncipality, state, federal, or other public agency includes the chief executive officer having responsibility for the
overall operations of a principal geographic unit of the agency(e.g.,a Regional Administrator of EPA).
CERTIFICATION STE ENT:
(Important: Legally Responsible Official read and sign after all submissions are final.
I certify that I am the responsible official for this facility,as described above,and hereby certify that the information contained
in this air emissions report,including attached calculations and documentation,is true,accurate and complete. (Subject to legal
enalities of up to$25,000 per occurrence and possible imprisonment as outlined in G.S.§143-215.3(a)(2))
Responsible Official's Signature Below use blue ink): Date Signed: Z A
Printed Name: Erik Wiborg
Si nature: may,
This form applies to Title V faci ' es. If this facility is not classified as Title V,please telephone your regional office Emission
Inventory contact at once for proper forms.
Email address of Responsible Official: [e-mail]
Information on this Form cannot be held confidential
WARO COPY
1

EMISSION SUMMARY TABLES

Facility Total CY 2009 Emission Summary Recorded in ED Facility ID #: 2100073
Facility Name: Regulator Marine Inc Permit#(s): 07132T09
Green House Gases Pollutants (GHG) Actual Emissions
Tons/Yr % Difference
Pollutant CAS
Not Not N/A
Reported Reported
CO2 equivalent (sum of individual GHG pollutant emission times their No GHGs
1995 IPCC Global Warming Potential (GWP), converted to metric tons) Reported
Criteria Pollutants Actual Emissions % Difference
(Tons/Year)
Pollutant CAS CY 2009 CY 2008
from ED from Fees
CO CO Not 0.260000 N/A
Reported
NOx NOx Not 0.620000 N/A
Reported
PM(TSP) TSP 0.040000 0.520000 -92.3%,
PM 10 PM 10 0.040000 0.520000 -92.3%
PM2.5 PM2.5 0.040000 0.520000 -92.3%,
S02 S02 Not 0.020000 N/A
Reported
VOC VOC 12.90 35.03 -63.2%,
Hazardous Air Pollutants (HAPs) Actual Emissions % Difference
and/or Toxic Air Pollutants (TAPs) (Pounds/Year)
Pollutant CAS CY 2009 CY 2008
from ED from Fees
MEK (methyl ethyl ketone, 2-butanone) 78-93-3 86.00 218.00 -60.6%,
Methyl methacrylate 80-62-6 2,270.00 4,634.00 -51.00%
Styrene 100-42-5 22,160.00 59,127.00 -62.5%,
Toluene 108-88-3 128.00 113.00 13.3%
Trimethylpentane, 2,2,4- 540-84-1 1,155.00 5,697.00 -79.7%
07/01/2010 Page 1 of 2

Largest Individual HAP Styrene 22,160.00 Ibs
Total HAP Emissions 4,558.00 Ibs
DAQ's Comments Regarding Inventory
07/01/2010 Page 2 of 2

REGULATOR MARINE,INC.-EDENTON,NC
CY 2009 NORTH CAROLINA AIR EMISSIONS INVENTORY
SUMMARY OF EMISSIONS
de minimis
HAP/TAP(lb/ r) VOCs(lb/ r) (lb/ r) Report?
Styrene 22160 22160 100 Yes
Benzene 3.01E-03 0.00 10 No
Methyl Methacr late(MMA) 2270 2270 1000 Yes
Toluene 128 128 100 Yes
N,N-Dimethylaniline 14 14 100 No
Meth lenedi hen 1 Diisoc ante(MDI) 0.00E+00 0.00 10 No
MEK 86 86 100 Yes
Trimeth 1 pentanediol diisobut Irate(TPD) 1155 1155 100 Yes
Cunene 1 0 100 No
VOC GRAND TOTAL FROM MATERIAL USE(lb/yr) 25,813
VOC GRAND TOTAL FROM MATERIAL USE(tpy) 12.9
PARTICULATE MATER
de minimis
(lb/ r) Report?
Toal Resin and Gel Coat Throughput 19,913 lb/yr - -
PM to Filters(1% overs ray) 199 lb/yr - -
Mesh Filter Control Eff.2 86% - -
PM/PM-10 Emission Rate' 27 lb/yr - -
PM/PM-10 Emission Rate' 0.01 tpy -Average % by wt.of Cobalt in Materials 2.30% -
Cobalt Emission Rate as PM 6.3E-03 lb/yr 1 No
HAP/TAP GRAND TOTAL 25,814 lb/yr
HAP/TAP GRAND TOTAL 12.9 ton/yr
Notes:
1.Mesh filter control efficiency per manufacturer.
2.The diesel-fired peak generator did not operate in 2009.
6/24/2010 CY 2009 AEI Emission Summary.xlsx

EMISSION RATE CALCULATIONS

Regulator Marine,Inc. SUPPORTING EMISSION FACTOR AND MISCELLANEOUS MATERIAL INFORMATION CY2009 Air Emission Inventory
Edenton,NC
Material Pollutant Factor
Putty Styrene 7.5
Gel Coat Styrene 50.4
Tooling GC Styrene 50.4
Resin Styrene 11.9
Patch Aid Styrene 31
Foam MD] I
Gel Coat Methyl Methacrylate 78.6
Resin Catalyst MEK 5
Misc Mat. All other VOCs/HAPs 100
MISC MATERIALS
Trimethyl n-Propyl Methyl Dimethyl General
Material Type Size Unit Lb/Gal 1.b/1 nit Styrene Ethanol Butanol Toluene Xylene MEK Hexane IPA ume benzenes Distallates Butanone MDI Bromide methacrylate aniline VOC
(% WO (% wt) (%wt) (%wt) (%wt) (%wt) (%WO (%r wt) (%wt) (%wt) (%wt) (%wt) (%wt) (%wt) (%wt) 19r wt) (%wt)
Description
POLY-BOND B39R Adhesive DRUM 55 8.52 468.60 24.4
POLY-BOND B46F Adhesive GAL PAIL 1 5.34 5.34 30.4
CORE BOND Adhesive BUCKET 5 5.58 27.9 31.6
CONTACT CEMENT Glue BUCKET 5 6.63 33.16 20 30
CONTACT CEMENT Glue 16 OZ 0.125 6.63 0.83 20 30
DURATEC GREY SFC PRIMER Tooling surfacing primer with GAL 1 10.759 10.76 4.5 10
ZYVAX Sfc cleaner GAL 1 7.047 7.05 50 50
MARBOCOAT Mold Release agent GAL 1 7.01 7.01 80
OSCARS Mold Release agent GAL 1 7.01 7.01
PATCHAID Patch LBS 1 8.56 1.00 57.466
MMA(EA.) Putty CARTRIDGE 0.1294531 8.54 1.11 6
MOLD RELEASE Mold Release GAL 1 7.2 7.2 0_v 20 u.- s
SEA GRIP 5000 Adhesive LBS 1 34.50 6
PARTALL FILM#10 Green Wax GAL 1 7.92 7.92
MEGUTAR'S Med.cut cleaner GAL I 10.01 10.01 10
MEGUTAR'S Machine glaze GAL I 8.67 8.67 15
POUR BOND FOAM DRUM > 10.22 562.1
DIVALETTE Putty BUCKET 5.421 27.11 40 1
ORANGE VINYL ESTER PUTTY Tooling Agent GAL 1 10.84 10.84 20.6 s.s
FV STYRENE Cleaner LBS 1 7.47 1.00 99.8
GL WAX GAL 1 7.47 7.47 92
BASF FOAM(CYL)#'s No regulated ingredients LBS 1 1.00
Axel XTEND S-19C Mold Sealer GAL 1 6.06 6.06 10 i

January 2009 Emissions Regulator Marine,Inc.,Edenton,NC
Miscellaneous Material Usage Emission Rates
Jan-09 Trimethyl. Dmrethyl
Material Description Usage Styrene Ethanol Butanol Toluene Xylene MEK Hexane IPA Cumene benzenes Distallates MDI MM.A Aniline Total VOC
(lbs) pb/mo) pb/mo) (Ib/mo) (Ib/mo) (lb/no) pb/mo) (lb/mo) (lb/mo) (lb/mo) (lb/mo) (Ib/mo) (lb/mo) Ob/mo) pb/mo) (lb/mo)
POLY-BOND B39R Adhesive 468.60 114.3 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 114.3
POLY-BOND B46F Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
CORE BOND Adhesive 111.60 35.3 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 35.3
CONTACT CEMENT Glue 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DURATEC GREY SFC PRIMER Tooling surfacing primer 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
ZYVAX Sfc cleaner 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
MARBOCOAT Mold Release agent 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
OSCARS Mold Release agent 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
PATCHAID Patch 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
MMA(EA.) Putty 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
MOLD RELEASE Mold Release 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DIVALETIE Putty 108.42 43.4 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 1.1 44.5
FV STYRENE Styrene 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
GL Wax Wax 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Panall Film#10 Polyvinyl Alcohol Coating 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Sea Grip 5(1()0 Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
ceo4-90-1.7 and SP Foam Foam 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Axel XTEND S-19C Mold Sealer 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Totals: 688.6 193.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 1.1 194.1 Total VOC Misc.Materials
0.0 Total non HAP VOC Misc.Materials
Act.Hour/Day 0 Emissions(lb/hr) 0.00 0.00 0.00
Act.Days/Mo 0 TPER(lb/hr) 14.4 16.4 22.4
Act.Hour/Nlo 0 Emissions(lb/hday) 0.0 0.0 0.0 0.0
TPER (lb/day) 98.0 57.0 78.0 23.0
Note:MEK includes emissions from resin catalysts
Resin and Gelcoat Usage
Methyl
Jan-09 Styrene TPD Benzene Methacrylate MEK Hexylene Glycol Vinyl Toluene
Usage Emission Emission Emission Emission Emission Emission Emission
Material Name Description (lb/mo) (%by wt) Factor (lb/mo) (%r by wt) Factor (lb/mo) (%r by wl) Factor (lb/mo) (%by wt) Factor (lb/mo) (%by wt) Factor (lb/mo) (%by wt) Factor (lb/mo) (%by wt) Factor (lb/mo)
Lupersol DDM-9-Red Resin Catalyst 160.0 58.0 100.0 92.8 36.0 5.00 6.0 I00 9.6
Lupersol DDM-9-Clcar Resin Catalyst 64.0 58.0 100.0 37.1 4.0E-04 100.0 2.56E-04 36.0 5.(X) i 6.0 100 3.8
RLPH-1621 Resin 416.0 34.7 11.9 17.2 0.0
967-WK-396 White Barrier Coat Gel Coat 510.0 31.9 50.4 81.9 0.0 78.6 0.0 4.0 100.0 20.4
968-WK-504 White Polycor Gel Coat 595.0 23.7 50.4 71.0 6.5 78.6 30.3 0.0
99M-WK-606 Regulator White Gel Coat 1695.0 30.8 50.4 262.9 2.0 78.6 26.6 0.0
Totals: 433.0 129.9 0.0 56.9 4.0 13.4 20.4
657.7 Total VOC Resin and Gel Coats
0.0 Ib/mo VOCJrom Foam
851.8 lb/nto VOC Grand Total(Resins,Gel Coats,Foam,and Misc.Mat.)
0.4 tons/ago VOC Grand Total
3440.0 lb/mo Total Resin and GC Usage

February 2009 Emissions Regulator Marine,Inc.,Edenton,NC
Miscellaneous Material Usage Emission Rates
Feb-09 Trimethyl- Dimethyl
Material Description Usage Styrene Ethanol Butanol Toluene Xylene MEK Hexane IPA Cumene benzenes Distallates MDI MMA Aniline Total VOC
(lbs) (lb/mo) (lb/mo) (lb/mo) (lb/mo) (lb/mo) (lb/mo) (lb/mo) (lb/mo) (lb/mo) (lb/mo) (lb/mo) (lb/mo) 0b/mo) (lb/mo) (lb/me)
POLY-BOND B39R Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
POLY-BOND B46F Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
COREBOND Adhesive 0.W 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
CONTACT CEMENT Glue 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DURATEC GREY SFC PRIMER Tooling surfacing primer 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
ZYVAX Sfc cleaner 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
MARBOCOAT Mold Release agent OU) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
OSCARS Mold Release agent 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
PATCHAID Patch 8110 4.6 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 4.6
MMA(EA.) Putty 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
MOLD RELEASE Mold Release 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DIVALETTE Putty 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
FV STYRENE Styrene 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
GL Wax Wax 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Partall Film#10 Polyvinyl Alcohol Coating 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Sea Grip 50M Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 (M) 0.0 0.0 0.0 0.0 0.0
eco4-90-1.7 and SP Foam Foam 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Axel XTEND S-19C Mold Sealer 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Light Grey EZ Sanding Primer Primer 11.79 1.9 0.0 0.0 0.0 0.03 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 2.0
Totals: 19.8 6.5 0.0 0.0 0.0 0.03 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 6.6 Total VOC Misc.Materials
0.0 Total nonHAP VOC Misc.Materials
Act.Hour/Day 15 Emissions(lb/hr) 0.00 0.00 0.00
AcL Days/Mo 15 TPFR(lb/hr) 14.4 16.4 22.4
Act.Hour/Mo 225 Emissions(lb/hday) 0.0 0.0 0.0 0.0
TPER (lb/day) 9&0 57.0 78.0 23.0
Note:MEK includes emissions from resin catalysts
Resin and Gcicoat Usage
Methyl
Feb-09 Styrene TPD Benzene Methacrylate MEK Hexylene Glycol Vinyl Toluene
Usage Emission Emission Emission Emission Emission Emission Emission
Material Name Description (Ib/mo) (%by wt) Factor (lb/mo) (%n by wt) Factor (lb/mo) (%by wt) Factor (lb/mo) (%by wt) Factor (lb/mo) (%by wt) Factor (lb/mo) (%by w1) Factor (lb/mo) (%by wt) Factor (lb/mul
VBXC-4521 Resin 21420.0 31.7 11.9 809.1 0.0
953-YJ-033 Yellow Gel Coat -150.0 22.0 50.4 -16.7 6.1 78.6 -7.2 0.0 100.0
953-IJ-066 Carolina Biue Gel Coat 146.0 26.7 50.4 19.6 8.8 78.6 10.1 0.0
945-B-201 Black Tooling Tooling GC 45.0 43.3 50.4 9.8 4.5 78.6 1.6 0.0
Totals: 811.9 0.0 0.0 4.4 0.0 0.0 0.0
826.3 Total VOC Resin and Gel Coats
0.0 Ib/mo VOCfrom Foam
832.9 Ib/mo VOC Grand Total(Resins,Gel Coats,Foam,and Misc.Mat.)
0.4 tons/mo VOC Grand Total
21461.0 Ib/mo Total Resin and GC Usage

March 2009 Emissions Regulator Marine,Inc.,Edenton,NC
Miscellaneous Material Usage Emission Rates
Mar-09 Trimethyl- Dimethyl
Material Description Usage Styrene Ethanol Butanol Toluene Xylene MEK Hexane IPA Cumene benzenes Distallates NMI MMA Aniline Total VOC
Obs) Obtain) (1b/mo) (lb/mo) Ob/mo) (lb/mo) Ob/mo) (lb/too) Ob/mo) Wax)) (lb/ma) (lb/mo) (lb/mo) (Ib/mo) (lb/mo) (Ib/mo)
POLY-BOND B39R Adhesive 2811.60 686.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 686.0
POLY-BOND B46F Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
CORE BOND Adhesive 111.60 35.3 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 35.3
CONTACT CEMENT Glue 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DURATEC GREY SFC PRIMER Tooling surfacing primer 21.52 1.0 0.0 0.0 0.0 0A 2.2 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 3.1
ZYVAX Sic cleaner 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
MARBOCOAT Mold Release agent 14.01 0.0 0.0 0.0 11.2 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 11.2
OSCARS Mold Release agent 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
PATCHAID Patch 48.00 27.6 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 27.6
MMA(EA.) Putty 53.04 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 34.5 0.0 34.5
MOLD RELEASE Mold Release 100.80 0.0 0.0 0.0 0.0 0.9 0.0 0.0 20.2 0.7 5.0 0.0 0.0 0.0 0.0 26.8
DIVALETIE Putty 298.16 119.3 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 3.0 122.2
FV STYRENE Styrene 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
GL Wax Wax 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Panall Film#10 Polyvinyl Alcohol Coating 7.92 0.0 2.7 0.2 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 2.9
Sea Grip 5000 Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
eco4-90-1.7 and SP Foam Foam 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Axel XTEND S-19C Mold Sealer 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Light Gray FZ Sanding Pritner Primer 0.00 0.0 0.0 0.0 0.0 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Totals: 3466.6 869.1 2.7 0.2 11.2 0.91 2.2 0.0 20.2 0.7 5.0 0.0 0.0 34.5 3.0 949.6 Total VOC Misc.Materials
23.0 Total nonHAP VOC Misc.Materials
ALL Hour/Day 11 Emissions(lb/hr) 0.05 0.00 0.01
AM.Days/Me 22 TPF.R(lb/hr) 14A 16.4 22.4
Act Hour/Me 242 Emissions(lb/hday) OS 0.0 0.1 0.0
TPER (lb/day) 99.0 57.0 78.0 23.0
Note:MEK includes emissions from resin catalyst%
Resin and Gcicoat Usage
Methyl
Mar4)9 Styrene TPD Benzene Methacrylale MEK Hexy)ene Glycol Vinyl Toluene
Usage Emission Emission Emission Emission Emission Emission Emission
Material Name Description (lb/trot) (ic by wt) Factor (lb/mul ?by wt) Factor (lb/mu) (%by wit Factor (lb/mu) (%by wt) Factor (lb/moi he'I) Factor Obtain) (%by wt) Factor (lb/mo) (%by wl) Factor (lb/mo)
Lupersol DDM-9-Red Resin Catalyst 192.0 58.0 100.0 111.4 n.0 5,00 3.5 6.0 1W 11.5
Lupersol DDM-9-Clear Resin Catalyst 128.0 >ti 0 100.0 74.2 4.0E-04 100.0 5.12E104 36.0 5.00 2.3 6.0 100 7.7
RGPS-1100 LOW COLOR Resin 400.0 46.7 11.9 22.2
0.0 100.0 0.0
RLPH-1621 Resin 1375.0 34.7 11.9 56.8 0.0 78.6 0.0 0.0 100.0 0.0
POLYLPIE TLP 33234-38 Resin 496.0 33.0 11.9 19.5 0.0 78.6 0.0 0.0 100.0 0.0
953-YJ-033 Yellow Gel Coat 409.0 22.0 50.4 45.4 6.1 78.6 19.7 0.0 100.0 0.0
953-IJ-066 Carolina Blue Gel Coat 282.0 26.7 50.4 37.9 8.8 78.6 19.4 0.0 100.0 0.0
967-WK 396 White Barrier Coat Gel Coat 2550.0 31.9 50.4 409.5 0.0 78.6 0.0 4.0 100.0 102.0
968-WK-504 White Polycor Gel Coat 1765.0 23.7 50.4 210.6 6.5 78.6 89.9 0.0 100.0 0.0
953-IJ-088 Midnight Blue Gel Coat 283.0 29.3 50.4 41.8 8.8 78.6 19.6 0.0 100.0 0.0
953-BJ-112 Black Gel Coat 91.0 28.8 50.4 13.2 9.7 78.6 6.9 0.0 100.0 0.0
99M-WK-606 Regulator While Gel Coat 2825.0 30.8 50.4 438.2 2.0 78.6 44.4 0.0 100.0 0.0
953-LA-626 Flag Blue Gel Coat 250.0 22.9 50.4 28.8 5.9 78.6 11.6 0.0 100.0 0.0
953-LH-244 Stars&Stripes Gel Coat 144.0 28.4 50.4 20.6 9.5 78.6 10.7 0.0 100.0 0.0
5797-W-90329 Hi-Flx Regulator While Gel Coat 550.0 30.0 50.4 83.2 10.0 78.6 43.2 0.0 100.0 0.0
945-B-201 Black Tooling Tooling GC 45.0 43.3 50.4 9.8 4.5 78.6 1.6 0.0 100.0 0.0
Totals: 1437.5 185.6 0.0 267.1 5.8 19.2 102.0
2017.2 Total VOC Resin and Gel Coats
0.0 lb/mo VOC from Foant
2966.7 lbhno VOC Grand Total(Resins,Gel Coats,Foam,and Misc.Mat.)
Ls tons/mo VOC Grand Total
11785.0 lb/ymt Total Resin and GC Usage

April 2009 Emissions Regulator Marine,Inc.,Edenton,NC
Miscellaneous Material Usage Emission Rates
Apr-09 Trimethyl- Dimethyl
Material Description Usage Styrene Ethanol Butanol Toluene Xylene MEK Hexane IPA Cumene benzenes Distallates MDI MMA Aniline Total VOC
Ohs) (lb/mo) pb/mo) (Ib/mo) (lb/mo) Winn) pb/mo) pb/mo) 0b/mo) Wain) (lb/mo) Wow) Ob/mo) (Ib/mo) (Ib/mo) (Ib/rno)
POLY-BOND B39R Adhesive 2343.00 571.7 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 571.7
POLY-BOND B46F Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
CURE BOND Adhesive 223.20 70.5 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 70.5
CONTACTCEMENT Glue 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DURATEC GREY SFC PRIMER Tooling surfacing primer 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
ZYVAX Sfc cleaner 21.14 0.0 0.0 0.0 10.6 0.0 10.6 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 21.1
MARBOCOAT Mold Release agent 14.01 0.0 0.0 0.0 11.2 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 Il 2
OSCARS Mold Release agent 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
PATCHAID Patch 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
MMA(EA.) Putty 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
MOLD RELEASE Mold Release 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DIVALETTE Putty 81.32 32.5 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.8 33.3
FV STYRENE Styrene 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
GL Wax Wax 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
PartalI Film#10 Polyvinyl Alcohol Coating 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Sea Grip 5000 Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
eco4-90-1.7 and SP Foam Foam 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Axel XTEND S-19C Mold Sealer 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Light Gay EZ Sanding Primer Primer 0.00 0.0 0.0 0.0 0.0 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Totals: 2682.7 674.7 0.0 0.0 21.8 0.00 10.6 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.8 707.9 Total VOC Misc.Materials
0.0 Total nonHAP VOC Misc.Materials
Act.Hour/Day 11 Emissions(lb/hr) 0.09 0.00 0.04
Act.Days/Mo 22 TPF.R(lb/hr) 14.4 16.4 22.4
Act.Hour/Mo 242 Emissions(lb/hday) 1.0 0.0 0.5 0.0
TPER ph/day) 98.0 57.0 78.0 23.0
Note:MEK includes emissions from resin catalysts
Resin and Gcicoat Usage
Methyl
Apr-09 Styrene TPD Benzene Methacrylate MEK Hexylene Glycol Vinyl Toluene
Usage Emission Emission Emission Emission Emission Emission Emission
Material Name Description Platmo) (%by wt) Factor (7b/mo) (%by wt) Factor (lb/mo) (%br wu Factor 0h/mo) 7 be w0 Factor pb/mo) (%by wt) Factor (lb/mo) (%by wt) Factor Pb/no) (%by wt) Factor Pb/ma)
Lupersol DDM-9-Red Resin Catalyst 256.0 58.0 100.0 148.5 36.0 5.(X) 4.6 6.0 100 15.4
LupersolDDM-9-Clear Resin Catalyst 96.0 58.0 Ifl(l.0 55.7 4.0E-04 I00.0 3.84E49 36.0 5.fK) 1.7 6.0 1W 5.8
RLPH-1621 Resin 460.0 34.7 11.9 19.0 0.0 78.6 0.0 0.0 100.0 0.0
POLYLTIE TLP 332--34-38 Resin 25640.0 33.0 11.9 1006.9 0.0 78.6 0.0 0.0 100.0 0.0
953-LJ4)66 Carolina Blue Gel Coat 231.0 26.7 50.4 31.1 8.8 78.6 15.9 0.0 100.0 0.0
967-WK-396 White Barrier Coal Gel Coat 2550.0 31.9 50.4 409.5 0.0 78.6 0.0 4.0 100.0 102.0
968-WK-504 White Polycor Gel Coat 1710.0 23.7 50.4 204.0 6.5 78.6 87.1 0.0 100.0 0.0
953-WH-172 Blue Tone Gel Coat 149.0 29.0 50.4 21.8 5.0 78.6 5.9 0.0 100.0 0.0
99M-WK-i06 Regulator White Gel Coat 2250.0 30.8 50.4 349.0 2.0 78.6 35.4 0.0 100.0 0.0
945-B-201 Black Tooling Tooling GC 45.0 43.3 50.4 9.8 4.5 78.6 1.6 0.0 100.0 0.0
Totals: 2051.1 204.1 0.0 145.7 6.3 21.1 102.0
2530.4 Total VOC Resin and Get Coats
0.0 lb/mo VOC from Foam
3238.4 lb/mo VOC Grand Total(Resits,Gel Coats,Foam,and Misc.Mat.)
1.6 tons/mo VOC Grand Total
33387.0 1b/mo Total Resin and GC Usage

May 2009 Emissions Regulator Marine,Inc.,Edenton,NC
Miscellaneous Material Usage Emission Rates
May-09 Trimethyl- Drmethyl
Material Description Usage Styrene Ethanol Butanol Toluene Xylene MEK Hexane IPA Cumene benzenes Distallates MDI MMA Aniline Total VOC
Obs) Oblino) (lb/mo) Ob/nw) (1b/mo) Ob/mo) (lb/mo) db/mo) (lb/mo) (lb/mo) (lb/mo) (lb/mo) 01thm) Ob/ruo) Ob/mo) (lb/mo)
POLY-BOND B39R Adhesive 2811.60 686.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 686.0
POLY-BOND B46F Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
CORE BOND Adhesive 55.80 17.6 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 17.6
CONTACT CEMENT Glue 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DURATF-C GREY SFC PRIMER Tooling surfacing printer 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
ZYVAX Ste cleaner 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
MARBOCOAT Mold Release agent 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
OSCARS Mold Release agent 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
PATCHAID Patch 64.00 36.8 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 36.8
MMA(EA.) Putty 26.52 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 17.2 0.0 17.2
MOLD RELEASE Mold Release 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DIVALETTE Putty 243.95 97.6 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 2.4 100.0
FV STYRENE Styrene 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
GL Wax Wax 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Partall Film#10 Polyvinyl Alcohol Coating 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Sea Grip 5000 Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
eco4-90-1.7 and SP Foam Foam 3200.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Axel XTEND S-19C Mold Sealer 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Light Gray EZ Sanding Primer Primer 0.00 0.0 0.0 0.0 0.0 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Totals: 6401.9 838.0 0.0 0.0 0.0 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 17.2 2.4 857.7 Total VOC Misc.Materials
0.0 Total nonHAP VOC Misc.Materials
Act.Hour/Day I Emissions(lb/hr) 11.00 0.00 0.00
Act.Days/Mo 21 TPF,R(lb/hr) 14.4 16.4 22.4
Act.Hour/Mo 2.11 Emissions(lb/hday) 0.0 0.0 0.0 0.0
TPER Ob/day) 9N.0 57.0 78.0 23.11
Note:MEK includes emissions from resin catalysts
Resin and Gcicoat Usage
Methyl
May4)9 Styrene TPD Benzene Methacrylate MEK Hexylene Glycol Vinyl Toluene
Usage Emission Emission Emission Emission Emission Emission Emission
Material Name Description (lb/mo) (1,In vW Factor Winn) (`7,by wt) Factor (lb/mo) (%by wt) Factor (lb/mol (17 by ull Factor (Iblino) (%by wt) Factor (lb/mu) (%by wt) Factor (lb/mo) (%by wt) Factor (lb/mo)
Lupersol DDM-9-Red Resin Catalyst 192.0 58.0 100.0 111.4 36.0 5.(X) 3.5 6.0 1 W 11.5
Lupersol DDM-9-Clear Resin Catalyst 96.0 58.0 100.0 55.7 4.0E-04 100.0 3.84E49 36.0 5.00 1.7 6.0 100 5.8
RLPH-1621 Resin 2300.0 34.7 11.9 95.0 0.0 78.6 0.0 0.0 100.0 0.0
944-BO-25 Black Gel Coat 84.0 35.0 50.4 14.8 4.8 78.6 3.2 0.0 100.0 0.0
99M-WK-606 Regulator White Gel Coat 2210.0 30.8 50.4 342.8 2.0 78.6 34.7 0.0 1W.0 0.0
953-LA-626 Flag Blue Gel Coat 300.0 '_2.9 50.4 34.6 5.9 78.6 13.9 0.0 100.0 0.0
945-B-201 Black Tooling Tooling GC 45.0 43.3 50.4 9.8 4.5 78.6 1.6 0.0 1M.0 0.0
Totals: 497.1 167.0 0.0 53.4 5.2 17.3 0.0
740.0 Total VOC Resin and Gel Coats
0.0 lb/no VOC from Foam
1597.7 lb/mo VOC Grand Total(Resins,Gel Coats,Foam,and Misc.Mat.)
0.8 tonslmo VOC Grand Total
5227.o lb/tmr Total Resin and GC Usage

June 2009 Emissions Regulator Marine,Inc.,Edenton,NC
Miscellaneous Material Usage Emission Rates
Jun-09 Trimethyl- Dimethyl
Material Description Usage Styrene Ethanol Butanol Toluene Xylene MEK Hexane IPA Cumene benzenes Distallates MIDI MMA Aniline Total VOC
Ohs) (1b/mo) (1b/mo) (lb/mo) db/ma) (lb/mo) Ob/mo) Ob/mo) (lb/mo) (lb/mo) (1b/mo) Ob/mno) (lb/mo) Obtain) Ob/mo) Ob/mo)
POLY-BOND B39R Adhesive 2811.60 686.0 0.0 0.0 O)) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 696.0
POLY-BOND B46F Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
CORE BOND Adhesive 83.70 26.4 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 26.4
CONTACTCEMENT Glue 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DURATEC GREY SFC PRIMER Tooling surfacing primer 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
ZYVAX Sic cleaner 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
MARBOCOAT Mold Release agent 14.01 0.0 0.0 0.0 11.2 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 11.2
OSCARS Mold Release agent 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
PATCHAID Patch 16.00 9.2 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 9.2
MMA(EA.) Putty 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
MOLD RELEASE Mold Release 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DIVALETTE Putty 81.32 32.5 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.8 33.3
FV STYRENE Styrene 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
GL Wax Wax 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Panall Film#10 Polyvinyl Alcohol Coating 15.85 0.0 5.4 0.3 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 5.7
Sea Grip 5000 Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
eco4-90-1.7 and SP Foam Foam 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Axel XTEND S-19C Mold Sealer 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Light Gray EZ Sanding Primer Primer 0.00 0.0 0.0 0.0 0.0 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Totals: 3022.5 754.2 5.4 0.3 11.2 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.8 771.9 Total VOC Misc.Materials
5.7 Total nonHAP VOC Misc.Materials
ALL Hour/Day 11 Emissions(lb/hr) 0.05 0.00 0.00
Act.Days/Mo 19 TPER(Ih/hr) 14.4 16.4 22.4
Act.Hour/Mo 209 Emissions Ob/hday) 0.6 0.0 0.0 0.0
TPER Ob/day) 98.0 57.0 78.0 23.11
Note:MEK include%emissions from resin catalysts
Resin and Gcicoat Usage
Methyl
Jun-09 Styrene TPD Benzene Methacrylate MEK Hexylene Glycol Vinyl Toluene
Usage Emission Emission Emission Emission Emission Emission Emission
Material Name Description (lb/mu) (%by wt) Factor Ob/mu) (%by wt) Factor (1b/mu) (%by wt) Factor dh/mo) (�7 by et) Factor db/nau (I/by vvt) Factor (ib/mo) (%by wt) Factor (lb/mo) (%by wt) Factor Ob/mo)
Lupersoi DDM-9-Red Resin Catalyst 256.0 58.0 100.0 148.5 36.0 5.(X) 4.6 6.0 RX) 15.4
Lupersol DDM-9-Clear Resin Catalyst 96.0 58.0 100.0 55.7 4.0E-04 100.0 3.84E-04 160 5.(X) 1.7 6.0 100 5.9
040-2989 Resin 2480.0 47.0 11.9 138.8 0.0 78.6 0.0 0.0 100.0 0.0
RLPH-1621 Resin 460.0 34.7 11.9 19.0 0.0 78.6 0.0 0.0 100.0 0.0
POLYLITE TLP 33234-38 Resin 24690.0 33.0 11.9 969.6 0.0 78.6 0.0 0.0 100.0 0.0
5797-W-9008 High Flex Plus White Gel Coal 3300.0 30.0 50.4 499.0 10.0 78.6 259.4 0.0 100.0 0.0
967-WK-396 White Barrier Coat Gel Coat 920.0 31.9 50.4 147.7 0.0 78.6 0.0 4.0 100.0 36.8
968-WK-504 White Polycor Gel Coat 1140.0 23.7 50.4 136.0 6.5 78.6 58.0 0.0 100.0 0.0
970-XJ-037 Patchaid Gel Coat 16.0 57.4 50.4 4.6 0.0 78.6 0.0 0.0 100.0 0.0
945-B-201 Black Tooling Tooling GC 45.0 43.3 50.4 9.8 4.5 78.6 1.6 0.0 100.0 0.0
Totals: 1924.5 204.2 0.0 319.0 6.3 21.1 36.8
2511.9 Total VOC Resin and Gel Coats
0.0 lbinw VOCJrom Foam
3283.9 Ib/nto VOC Grand Total(Resins,Gel Coats,Foam,and Misc.Mat.)
1.6 tonsinto VOC Grand Total
33403.0 lb/mo Total Resin and GC Usage

July 2009 Emissions Regulator Marine,Inc.,Edenton,NC
Miscellaneous Material Usage Emission Rates
Ju14)9 Trimethyl- Dimethyl
Material Description Usage Styrene Ethanol Butanol Toluene Xylene MEEK Hexane IPA Cumene benzenes Distallates MDI MMA Aniline Total VOC
Ohs) (lb/mo) pb/mo) Wow) pb/rno) (Ib/rno) pb/mo) 0b/mo) (Ib/mo) (lb/mo) Winn) Ob/mo) 0b/mo) 0b/nw) Wow) pb/mo)
POLY-BOND B39R Adhesive 2811.60 686.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 686.0
POLY-BOND B46F Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
CORE BOND Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
CONTACTCEMENT Glue 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DURATEC GREY SFC PRIMER Tooling surfacing primer 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
ZYVAX Ste cleaner 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
MARBOCOAT Mold Release agent 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
OSCARS Mold Release agent 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
PATCHAB) Patch 32.00 18.4 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 18.4
MMA(EA.) Putty 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
MOLD RELEASE Mold Release 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DIVALETTE Putty 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
FV STYRENE Styrene 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
GL Wax Wax 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Partall Film#10 Polyvinyl Alcohol Coating 0.W 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Sea Grip 5000 Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
eco4-90-1.7 and SP Foam Foam 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Axel XTEND S-19C Mold Sealer 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Light Gray EZ Sanding Primer Primer 0.00 0.0 0.0 0.0 0.0 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Totals: 2843.6 704.4 0.0 0.0 0.0 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 704.4 Total VOC Misc.Materiais
0.0 Total mmHAP VOC Misc.Materials
Act.Hour/Day 11 Emissions(lb/hr) 0.00 0.00 0.00
Act.Days/Mo 20 TPF.R(lb/hr) 14.4 16.4 22.4
Act.Hour/Mo 220 Emissions 0b/hday) 0.0 0.0 0.0 0.0
TPER (lb/day) 98.0 57.0 78.0 23.0
Now:MEK includes emissions from resin catalysts
Resin and Gcicoat Usage
Methyl
Jul4)9 Styrene TPD Benzene Methacrylale MEK Hexylene Glycol Vinyl Toluene
Usage Emission Emission Emission Emission Emission Emission Emission
Material Name Description (lb/rrar) (%by wt) Factor (lb/rnu) (%by w0 Factor (Ib/rno) (%by wt) Factor db/nw) )%by w4) Factor (Ib/mo) (%by wt) Factor (lb/nw) (%by wt) Factor (lb/mo) (%by wt) Factor (lb/mn l
Lupersol DDM-9-Red Resin Catalyst 320.0 58.0 1W.0 185.6 36.0 5.(8) 5.8 6.0 100 19.2
Lupersol DDM-9-Clear Resin Catalyst 64.0 58.0 100.0 37.1 4.0E-04 100.0 2.56L-04 36.0 5.00 1.2 6.0 100 3.8
RLPH-1621 Resin 910.0 34.7 11.9 37.6 0.0 78.6 0.0 0.0 100.0 0.0
99M-WJ-728 White Amorflex MC Gel Coat 3330.0 27.5 50.4 461.7 4.5 78.6 117.8 0.0 100.0 0.0
953-L)-066 Carolina Blue Gel Coat 256.0 26.7 50.4 34.4 8.8 78.6 17.6 0.0 1 W.0 0.0
967-WK-396 While Barrier Coat Gel Coat 550.0 31.9 50.4 88.3 0.0 78.6 0.0 4.0 100.0 22.0
970-XJ-037 Patchaid Gel Coat 16.0 57.4 50.4 4.6 0.0 78.6 0.0 0.0 100.0 0.0
953-WH-172 Blue Tone Gel Coat 203.0 29.0 50.4 29.7 5.0 78.6 8.0 0.0 100.0 0.0
945-B-201 Black Tooling Tooling GC 40.0 43.3 50.4 8.7 4.5 78.6 1.4 0.0 100.0 0.0
Totals: 665.1 222.7 0.0 144.8 6.9 23.0 22.0
1084.6 Total VOC Resin and Gel Coats
0.0 lb/mo VOC from Foam
1789.0 lb/mo VOC Grand Total(Resins,Gel Coats,Foam,and Misc.Mat.)
0.9 tons/rno VOC Grand Total
5689.0 lb/mo Total Resin and GC Usage

August 2009 Emissions Regulator Marine,Inc.,Edenton,NC
Miscellaneous Material Usage Emission Kate.
Aug-09 'I rimcthN I- Dimethyl
Material Description Usage Styrene Ethanol Butanol Toluene Xylene MEK Hexane IPA Cunene benzenes Distallates MDl MMA Aniline Total VOC
(lbs) (lb/mo) Ob/mo) Ob/mo) Ob/mo) (lb/mo) Ob/mo) Ob/rno) (lb/nto) Ob/mo) (lb/no) (lb/mo) Wow) Winn) Ob/mo) Ob/mo)
POLY-BOND B39R Adhesive 937.20 228.7 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 228.7
POLY-BOND B46F Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
CORE BOND Adhesive 167.40 52.9 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 52.9
CONTACT CEMENT Glue 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DURATEC GREY SFC PRIMER Tooling surfacing primer 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
ZYVAX Sfe cleaner 56.38 0.0 0.0 0.0 28.2 0.0 28.2 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 56.4
MARBOCOAT Mold Release agent 42.03 0.0 0.0 0.0 33.6 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 33.6
OSCARS Mold Release agent 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
PATCHAID Patch 2.00 1.1 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 1.1
MMA(EA.) Putty 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
MOLD RELEASE Mold Release 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DIVALETIE Putty 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
FV STYRENE Styrene 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
GL Wax Wax 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Panall Film#10 Polyvinyl Alcohol Coating 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Sea Grip 5000 Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
eco4-90-1.7 and SP Foam Foam 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Axel XTEND S-19C Mold Sealer 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Light Gray EZ Sanding Printer Primer 0.00 0.0 0.0 0.0 0.0 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Totals: 1205.0 282.7 0.0 0.0 61.8 0.00 28.2 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 372.7 Total VOC Misc.Materials
0.0 Total nonHAP VOC Misc.Materials
AcL Hour/Day 11 Emissions(lb/hrl 0.27 0.00 0.12
Act Days/Mo 21 TPER(lb/hr) 14.4 16.4 22.4
AM.Hour/Mo 231 Emissions(lb/hday) 2.9 0.0 1.3 0.0
TPER (Ib/day) 98.0 57.0 78.11 23.0
Note:MEK includcc cmissiuns from resin catalysts
Resin and Gcicoat Usage
Methyl
Aug-09 Styrene TPD Benzene Metbacrylate MEK Hexylene Glycol Vinyl Toluene
Usage Emission Emission Emission Endssion Emission Emission Emission
Material Name Description Ob/mul i 7 by wt) Factor (lb/mo) (%by wt) Factor (lb/mo) (%by wt) Factor (lb/no) (%by wt) Factor Ob/mo) (%by wry Factor (lb/mo) (%by wl) Factor (lb/mu) (%by wt) Factor ilb/two
Lupersol DDM-9-Rcd Resin Catalyst 224.0 58.0 100.0 129.9 36.0 5.00 4.0 6.0 100 13.4
Lupersol DDM-9-Clear Resin Catalyst 32.0 58.0 100.0 18.6 4.0E-04 100.0 1.28E-04 36.0 5.00 06 6.0 100 1.9
POLYLTIE TLP 33234-38 Resin 37900.0 33.0 11.9 1488.3 0.0 78.6 0.0 0.0 100.0 0.0
RLPH-1621 Resin 925.0 34.7 11.9 38.2 0.0 78.6 0.0 0.0 100.0 0.0
99M-WJ-728 White An-Aw lex MC Gel Coat 3300.0 27.5 50.4 457.5 4.5 78.6 116.7 0.0 100.0 0.0
967-WK-396 White Barrier Coat Gel Coal 930.0 31.9 50.4 149.3 0.0 78.6 0.0 4.0 100.0 37.2
953-LT-019 Medium Blue Gel Coat 96.0 28.6 50.4 13.8 8.2 78.6 6.2 0.0 100.0 0.0
Totals: 2147.3 148.5 0.0 122.9 4.6 15.4 37.2
2473.8 Total VOC Resin and Gel Coats
0.0 lb/mo VOC front Foam
2848.6 lb/mo VOC Grand Total(Resins,Gel Coats,Foam,and Misc.Mat.)
1.4 tonslato VOC Grand Total
43407.0 lb/mu Total Resin and GC Usage

September 2009 Emissions Regulator Marine,Inc.,Edenton,NC
Miscellaneous Material Usage Emission Rates
Sep-09 Trimethyl- Dimethyl
Material Description Usage Styrene Ethanol Butanol Toluene Xylene MEK Hexane IPA Cumene benzenes Distallates MDI MMA Aniline Total VOC
(lbs) Ob/mo) Ob/mo) Ob/mo) (lb/mo) Ob/mo) (lb/mo) Ob/rrto) (lb/mo) Ob/mo) (lb/mo) (lb/mo) Ob/mo) (lb/no) (lb/mo) Ob/mo)
POLY-BOND B39R Adhesive 2343.00 571.7 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 571.7
POLY-BOND B46F Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
CORE BOND Adhesive 83.70 26.4 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 26.4
CONTACT CEMENT Glue 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DURATEC GREY SFC PRIMER Tooling surfacing printer 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
ZYVAX Sfc cleaner 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
MARBOCOAT Mold Release agent 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
OSCARS Mold Release agent 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
PATCHAID Patch 9.00 5.2 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 5.2
MMA(EA.) Putty 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
MOLD RELEASE Mold Release 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DiVALETTE Putty 162.63 65.1 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 1.6 66.7
FV STYRENE Styrene 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
GL Wax Wax 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Partall Film#10 Polyvinyl Alcohol Coating 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Sea Grip 5000 Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
eco4-90-1.7 and SP Foam Foam 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Axel XTEND S-19C Mold Sealer 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Light Gray FZ Sanding Primer Primer 0.00 0.0 0.0 0.0 0.0 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Totals: 2598.3 668.4 0.0 0.0 0.0 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 1.6 670.0 Total VOC Misc.Materials
0.0 Total nonHAP VOC Misc.Materials
Act Hour/Day 11 Emissions(lb/hr) 0.00 0.00 0.00
Act Days/Mo 22 TPER(Ib/hr) 14.4 16.4 22.4
Act.Hour/Mo 242 Emissions(lb/hday) 0.0 0.0 0.0 0.0
TPER Ob/day) ".0 57.0 78.0 23.0
Note:MEK includes emissions from resin catalysts
Rcsin and Gcicoat Usage
Methyl
Sep-09 Styrene TPD Bco,ene Melhacrylate MEK Hexylene Glycol Vinyl Toluene
Usage Emission Emission Emi-ion Emission Emission Emission Emission
Material Name Description (lb/mu) (%bywt) Factor (lb/mo) (%bywt) Factor (lb/mo) (7eb)wt) Factor (Ih/nx,i I b}ut) Factor (lb/m.) rr bywt) Factor (lb/mu) (%bywt) Factor (lb/mo) (%bywt) Factor Lib/nrrl
Lupersol DDM-9-Red Resin Catalyst 112.0 58.0 100.0 65.0 36.0 5.00 2.0 6.0 1W 6.7
L.upersol DDM-9-Clear Resin Catalyst 56.0 58.0 100.0 32.5 4.0E-04 I M.0 2.24E-04 36.0 5.00 1.0 6.0 100 3.4
040-2989 Resin 40.0 47.0 11.9 2.2 0.0 78.6 0.0 0.0 100.0 0.0
POLYLJTE TL.P 33234-38 Resin 20200.0 33.0 11.9 793.3 0.0 78.6 0.0 0.0 100.0 0.0
RLPH-1621 Resin 489.0 34.7 11.9 20.2 0.0 78.6 0.0 0.0 100.0 0.0
99M-WJ-728 White Antorflex MC Gel Coat 2970.0 27.5 50.4 411.8 4.5 78.6 105.0 0.0 100.0 0.0
953-1J-W Carolina Blue Gel Coat 246.0 26.7 50.4 33.1 8.8 78.6 16.9 0.0 100.0 0.0
967-WK-396 White Barrier Coat Gel Coat 930.0 31.9 50.4 149.3 0.0 78.6 0.0 4.0 100.0 37.2
953-LA-626 Flag Blue Gel Coat 200.0 22.9 50.4 23.0 5.9 78.6 9.3 0.0 100.0 0.0
970-XJ-037 Patchaid Gel Coat 9.0 57.4 50.4 2.6 0.0 78.6 0.0 0.0 100.0 0.0
953-LH-244 Stars&Stripes Gel Coat 150.0 28.4 50.4 21.5 9.5 78.6 11.2 0.0 100.0 0.0
Totals: 1457.0 97.4 0.0 142.5 3.0 10.1 37.2
1747.2 Total VOC Resin and Gel Coats
0.0 lb/mo VOC from Foam
2417.2 lb/no VOC Grand Total(Resins,Get Coats,Foam,and Misc.Mat.)
1.2 tons/mo VOC Grand Total
25402.0 lb/nto Total Resin and GC Usage

October 2009 Emissions Regulator Marine,Inc.,Edenton,NC
Miscellaneous Material Usage Emission Rates
Oct-09 Trimethyl- Dim-thy]
Material DeKription Usage Styrene Ethanol Bulanol Toluene Xylene MEK Hexane IPA Consent be-nes Distallates Mlyl MMA Aniline Total VOC
(lbs) Ob/mu) Ill✓mul llb/m0 116/m0 11b/mr) (lhllm) (lbtm) flit/mq (INmr) Oh/mu) Oh/mu) (Hu/ma) Olean) Oh/mo) (lb/=)
POLY-BOND B39R Adhesive 1405.80 343.0 0.0 0.0 0.0 O.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 343.0
POLY-BOND B46F Adhesive 0.01) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
CORE BOND Adhesive 55.80 17.6 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 17.6
CONTACT CEMENT Glue 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DURATEC GREY SFC PRIMER Tooling surfacing primer 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
ZYVAX Sk ckamr 21.14 0.0 0.0 0.0 10.6 0.0 10.6 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 21.1
MARBOCOAT Mold Release agent O.W 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 OR 0.0
OSCARS Mold Release agent 14.01 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
PATCHAID Patch 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
MMA(EA.) Pull, 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
MOLD RELEASE Mold Rckaw 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DIVALE'PIF. Putty 54.21 21.7 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.5 22.2
FV STYRENE sty.- 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
GL Wax Wax 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Pana11 Film#10 Polyvinyl Akohol Coating 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Sea Grip 5000 Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
ca4-90.1,7 and SP Foam Foam 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Axel XTEND S-19C Mold Scaler 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Light Gray EZ Sanding Primer Primer 0.00 0.0 0.0 0.0 0.0 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Totals: 1551.0 382.3 0.0 0.0 10.6 0.00 10.6 0.0 0.0 0.0 0.0 0.0 0.0 0.0 OS 404.0 Total VOC Misc.Materials
0.0 Total nonHAP VOC Mina Afaleriats
Act Hour/Day 11 Emicsiuns(lb/hr) 0.04 0.00 0.04
Act Days(M.22 TPER 116/hr) 14.4 16.4 22A
Act.Hour/Mo 242 Emixstons IlbOtday) 05 0.0 05 0.0
TPER(lb/day) 98.0 57.0 78.0 Z1.0
Note:MFK irchNes sos,wom from resin carat us
Resin and Gelcoat Usagr
Mcthyl
00-09 Styrene TPD Bennene Melhacrylale MEK Hexylene Glycol Vinyl Toluene Dimethyl Phthalate
Usage Emission Emission Emission EmiWon Emission Emission Emission Erruasion
Material Name Description 0htmul (%by wt) Factor (Ibfmo) (%by wit Factor ONtm) (%by-0 Factor OMrml (%by wtl Factor OWmol (%by wit Factor Ob/mt) (%by wt) Factor (INmo) (%by wt) Factor (lb/mo) (%by wit Factor Oh/mr)
Norox MEK-9 Red Resin Catalyst 64.0 0.0 100.0 0.0 20 5 w 0A 0.0 100 0.0 60.0 too 38 a
Norox MEK-9 Resin Catalyst 16.0 0.0 100.0 0.0 O.OF.+00 100.0 0.00E+00 2.0 5.(M) (W 0.0 1R) 0.0 60.0 1W 9.6
POLYLITE TLP 33234-38 Resin 14400.0 33.0 11.9 565.5 0.0 78.6 0.0 0.0 100.0 0.0
RI-PH-1621 Resin 463.0 34.7 11.9 19.1 0.0 78.6 0.0 0.0 100.0 0.0
953-LJ4)66 Carolina Blue Gel Coat 45.0 26.7 50.4 6.1 8.8 78.6 3.1 0.0 100.0 0.0
953-LA-626 nag Blue Gel Coat 99.0 22.9 50.4 11.4 5.9 78.6 4.6 0.0 100.0 0.0
953-W H-172 Blue Tom Gel Coat 154.0 29.0 50.4 22.5 5.0 78.6 6.0 0.0 100.0 0.0
99M-WJ-728 White Amrr(lex MC Gel Coal 2750.0 27.5 50.4 381.3 4.5 79.6 97.3 0.0 100.0 0.0
967-W K-396 White Barrier Coat Gel Coat 1100.0 31.9 50.4 176.6 0.0 78.6 0.0 4.0 100.0 44.0
953-LT-019 Medium Blue Gel Coat 1100.0 28.6 50A 158.5 8.2 78.6 71.1 0.0 100.0 0.0
5797-W-90329 H"r-Flx Regulator White Gel Coat 3280.0 30.0 50.4 495.9 10.0 78.6 257.8 0.0 I00.0 0.0
Totals: 1837.0 0.0 0.0 439.9 0.1 0.0 44.0 48.0
2369.0 Total VOC Resin and Crel Coals
0.0 /blmo VOC from Foam
2773.0 lb/mo VOC Grand Total(Resins,Get Coals,Foam.and A1isc.Mot.)
1.4 tons/ma VOC Grand Total
23471.0 lb/ma Total Resin and GC Usage

November 2009 Emissions Regulator Marine,Inc.,Edenton,NC
Miscellaneous Material Usage Emission Rates
Nov-09 Trirnethyl- Dimethyl
Material Description Usage Styrene Ethanol Rational Toluene Xylene MEK Hexane IPA Cumene benxnes Distallates Mot MMA Aniline Total VOC
Obs) (lb/=) (lh/=) (lb/mu) (INmo) Oh/ffu) (lb/M) (1Nmr) (lb/ton) (INanl Ilb/mul UNmrl ONea) IINmu) IINraO (INm)
POLY-BOND B39R Adhesive 2343A) 571.7 0.0 0.0 0.0 41.0 0.0 (10 0.0 0.0 0.0 0.0 0.0 0.0 0.0 571.7
POLY-BOND B46F Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.4) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
CORE BOND Adhesive 223.20 70.3 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 70.5
CONTACT CEMENT Glue 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DURATEC GREY SFC PRIMER Tooling surfacing primer 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
ZYVAX Sfe ckaner 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
61ARBOCOAT Mold Release agent 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
OSCARS Mold Release agent 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 &0 0.0 0.0
PATCHAID Patch 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
MMA(EA.) Putty 26.52 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 17.2 0.0 17.2
MOLD RELEASE Mold Release 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DIVALETIE Putty 216.94 86.7 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 2.2 88.9
FV STYRENE Styrene 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
GL Wax Wax 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Panall Film#10 Polyvinyl Alcohol Coaling 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Sea Grip 5000 Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 OA 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
ecrvl-90-1.7 and SP Foam Foam 3200.00 0.0 0.0 0.0 0.0 0.0 0.0 0A 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Axe)XTEND S-19C Mold Sealer 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Light Gray EZ Sanding Printer Primer 0.00 0.0 0.0 0.0 0.0 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Tutals: 6009.6 729.0 0.0 0.0 0.0 0.00 0.0 0.0 0.0 0.0 It 0.0 0.0 17.2 Z2 748.4 Total VOC Mix.Materials
0.0 Total aonHAP VOC Misr.Materials
Act.Hour/Day 11 Emissions(INhr) 0.00 0.00 0.00
Act.Days/Mo 22 TPF.R(ib/hr) 14.4 16.4 22A
Act.Huar/Mo 242 Emisdorxs Ob/hdrv) 0.0 0.0 0.0 0.0
TPER(lb/day) 98.0 57.0 78.0 Z1.0
Nsae:MFK includes .m iom hum resin catalysts
Resin and Gelcoat Usage
Methyl
N-09 Styrene TPD Rennene Methacrylate MEK Hexylene Glycol Vinyl Toluene Dimethyl Phthalate
Usage Emisdun Emission Emission Emi.won Emission Eroission Emis iun Emission
Material Name Description ONmn) (k by w0 Factor Oblate) (%by wt) Fader (INmo) (%b w1) Factor (INmr) (`i by w1) Factor (lNmo) (%by wl) Factor (lNmr) (%by wt) Factor (INua) (%by will Factor (Hdmu) (%by wtl Facinr (INmt)
Nurux MEK-9 Red Resin Cataiysl 88.0 0.0 0 100 0.0 2.00 5.00 U.1 6 1W 5.3 0 0 0.0 60.0 1M 52..4
Nomx MEK-9 Resin Catalyst 24.0 0.0 0 100 0.0 00)(14 100.0 9.600E-05 2.(0 5.00 (W 6 1W 1.4 0 0 0.0 60.0 1W 144
RLPH-1621 Resin 1650.0 34.7 11.9 68.2 0.0 78.6 0.0 0.0 110.0 0.0
99M-WJ-728 White Atnorllex MC Gel Coal 2400.0 27.5 50.4 332.8 4.5 78.6 84.9 0.0 100.0 0.0
953-LJ4)66 Carolina Blue Gel Coat 180.0 26.7 50.4 24.2 8.8 78.6 12.4 0.0 100.0 0.0
953-LA-626 Flag Blue Gel Coat 225.0 22.9 50.4 25.9 5.9 78.6 10.4 0.0 100.0 0.0
953-WH-172 Blue Tone Gel Coat 180.0 29.0 50.4 26.3 5.0 78.6 7.1 0.0 100.0 0.0
953-LH-244 Stars R Stripes Gel Coal 90.0 28.4 50.4 12.9 9.5 78.6 6.7 0.0 100.0 0.0
968-WA-79 White Interior Enamel Gel Coal 580.0 28.5 50.4 83.2 3.0 78.6 13.7 0.0 100.0 0.0
967-WK-396 White Barrier Coat Gel Coat IIM.0 31.9 50.4 192.7 0.0 78.6 0.0 4.0 100.0 48.0
5797-W-90329 Hi-Flx Regulator White Gel Coal 2400.0 30.0 50.4 3,62.9 10.0 78.6 188.6 0.0 100.0 0.0
Totals: 1129.0 0.0 0.0 323.8 0.1 6.7 48.0 67.2
I574.9 Total{YIC Resin and Gel Coats
0.0 lb/mo VOC from Foam
2323.3 Ibleto{OC Grand Total(Resins,Gel Coots,Foam,and Misr.Mat.)
1.2 tons/mo VOC Grand Total
9017.0 lb/mo Total Resin and GC Usage

December 2009 Emissions Regulator Marine,Inc.,Edenton,NC
Miscellaneous Material Usage Emission Rates
D-419 Trimethyl- Dimethyl
Material Description Usage Styrene Ethanol Butanol Toluene Xylem MEK Hexane IPA Comm benaenes 1>istallates MDI MMA Aniline Total VOC
Obs) Oh/mo) (113111so) 0/1110) (1Nmu) (iNmu) 01dmo) f1Nmo) (1Nan) (1Nmu) (INmo) IINtm) 11Nmu1 Obtain) (INmu) (INmd
POLY-BOND B39R Adlwsiye 2811.60 686.0 0.0 0.0 0.0 0.0 0.0 0.0 0.11 0.0 0.0 0.0 0.0 0.0 0.0 686.0
POLY-BOND B46F Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
CORE BOND Adhesive 55.80 17.6 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 17.6
CONTACTCEMENT Glue 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DURATEC GREY SFr PRIMER Tooling surfacing primer 21.52 1.0 0.0 0.0 0.0 0.0 2.2 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 3.1
ZYVAX Sic cleaner 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
MARBOCOAT Mold Release agent 14.01 0.0 0.0 0.0 11.2 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 II 2
OSCARS Mold Release agent 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
PATCHAID Patch 1.00 0.6 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.6
MMA(EA.) Puny 26.52 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 17.2 0.0 17'2
MOLD RELEASE Mold Release 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
DIVALETTE Putty 162.63 65.1 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 1.6 66.7
FV STYRENE Styrene 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
GL Wax Wax 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Pan.H FUrn#10 Polyvinyl Alcohol Coating 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Sea Grip 5000 Adhesive 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
eco4-90-1.7 and SP Fwm Foam 0.00 0.0 0.0 Ito 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Axel XTEND S-19C Mold Sealer 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Light Gray EZ Sanding Pruner Printer 0.00 0.0 0.0 0.0 0.0 0.00 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Totals: 3093.1 770.3 0.0 0.0 11.2 0.00 2.2 0.0 0.0 0.0 0.0 0.0 0.0 17.2 L6 802.5 Total VOC Misr.Materials
0.0 Total nonHAP V(X'Mixr.Materials
Act.Hour/Day I Emissiuns(INbr) 0.05 0.00 OAl
Act.Days/Mo 22 TPER(INhri 14.4 16.4 22.4
Act Hnur/Mo 242 Emissions IlNlda_v) 0.5 0.0 0.1 111.0
TPF.R(lb/day) 98.0 57.0 78.0 23.0
Nate:MF.K includes cmissko from resin catalysts
Resin and Gelcoat Usage
Methyl
Dec-09 Styrene TPD Bemene hlethacrylate MEK Hexylene GWcol Vinyl Toluene Dimethyl Phthalate
Usage Emission Emission Emission Emission Emission Emission Emission En"an
Material Name Description 0h/snt) (%by wt) Factor (lh/mu) (%by wl) Factor Ohl"') (1,h.wo Factor Ob/mo) (%by wt) Factor ONroo) I%by wit Factor dh/-) (%by-1) Factor (INtm) (%by w1) Factor (INmu) l%by wt) Factor flNrnr)
Nam MEK-9 Red Resin Catalyst 192J0 0.0 0 1W 0.0 2.W 5.(8) 0.2 6 1W 11.5 0 0 0.0 6U.0 100 115.2
Noma MEK-9 Resin Catalyst 96.0 0.0 0 1011 0.0 0.0004 100.0 3.840E-04 2.(8) 5.(8) 0.1 6 100 5.8 0 0 0.0 60.0 1 w 57.6
040-4221 Resin 520.0 40.11 11.9 25.3 0.0 78.6 UA 0.0 100.0 0.0
99M-WJ-728 White Amnrllex MC Gel Coat 2400.0 27.5 50.4 332.8 4.5 78.6 84.9 0.0 100.0 0.0
968-WA-79 While Interior Enanxl Gel Coat 1160.0 28.5 50.4 166.4 3.0 78.6 27.4 0.0 100.0 0.0
5797-W-90329 Hi-Flx Regulator While Gel Coat 2400.0 30.0 50.4 162.9 10.0 78.6 188.6 0.0 100.0 0.0
Totals: 887.3 0.0 0.0 300.9 0.3 17.3 0.0 172.8
1378.5 Total VOC Resin and Gel Coats
0.0 tb/mo VOC from Faam
2181.0 lb/not VOC Grand Total(Resins,Gel Coats,Fannin,and Misc.Mal.)
1.1 tons/mo VOC Grand Total
6768.0 lb/na Total Resin and GC Usage