AQ_F_0700122_20071010_EI_Cmb-EI-File

Wf
2006 Emissions Inventory Review/Data Tracking Form
Facility Name: F � Facility ID:
S b do
Permit Writer: Inspector: Confidential?
10
Initial Review/Data Entry
❑ If confidential information received, it has been properly labeled and stored. Sanitized copies have been
received for public use.
❑ Two copies of inventory were received and responsible official signed forms.
Inventory Review/Database Entry
DK—Forms appear to be complete [A-'Calculations and control efficiencies
supporting emissions appear correct
(y Calculations appear to add up ok C-1--All permitted sources and required
significant activities are quantified
❑ All compliance issues resulting from review are being addressed. (i.e.toxics, emission limitations
exceeded, unpermitted sources)
B—All volatile HAPS/TAPS are included in the VOC total
U.- All appropriate ID numbers are entered where they should be(Source, Stack)
❑ All changes made in the review by AQ staff are in both copies of the inventory before sending to
Central Office.
Comments:
Signature:
Date Billing Contact & General Data updated in FEES database l y )(O 101-
Date Emissions Data loaded into I-BEAM database 101 it) I o I
Remember: Confidential copies must be properly handled!
(S:\AIR\ ADMIN\2002 Emission Inventories\WARD inventory review form.doc)
WORO Copy

Facility Tetal CY 2006 Emission Summary Recorded in ED Facility ID #: 0700122
Facility Name: Fountain Power Boats Permit#(s): 06175T10
Criteria Pollutants Actual Emissions % Difference
(Tons/Year)
Pollutant CAS CY 2006 CY 2005
from ED from Fees
PM(TSP) TSP 1.68 1.68 0.0%
PM 10 PM 10 0.840000 0.840000 0.0%
PM2.5 PM2.5 0.420000 0.420000 0.0%
VOC (Meeting Federal Definition as VOC 62.09 73.51 -15.5%
photochemically reactive)
Hazardous Air Pollutants (HAPs) Actual Emissions % Difference
and/or Toxic Air Pollutants (TAPs) (Pounds/Year)
Pollutant CAS CY 2006 CY 2005
from ED from Fees
Nickel& Compounds, sum total mass, inc elemental 14.00 17.00 -17.6%
Nickel, soluble compounds as nickel (Component of NICKSOLCPDS 14.00 17.00 -17.6`6
3730241NIC)
Glycol ethers (total all individual glycol ethers-See 63.00 61.00 3.3%
h tip.11da q.state.nc.us/toxics/glycoo
Glycol Ethers, Unlisted(Specify& Component of GLYET-Other 63.00 61.00 3.3%
GLYET) (See http://daq.state.nc.us/toxics/glycol/)
Dibutylphthalate 84-74-2 X 446.00 278.00 60.40/0
Dimethyl phthalate 131-11-3 289.00 288.00 0.3%
Ethyl acetate 141-78-6 82.00 13.00 12.3%
Ethyl benzene 100-41-4 208.00 178.00 16.9%
Hexamethylene-1,6-diisocyanate 822-06-0 2.00 2.00 0.0%
Hexane, n- 110-54-3 115.00 106.00 8.5%
Methyl ethyl ketone 78-93-3 1,613.00 1,518.00 6.3%
Methyl isobutyl ketone 108-10-1 538.00 585.00 -8.0%
Methyl methacrylate 80-62-6 19,560.00 16,778.00 16.60/6
Methylene chloride 75-09-2 Not Not N/A
Reported Reported
Styrene 100-42-5 1/76,192.00 110,379.00 -31.0%
10/10/2007 Page 1 of 2

Facility Total CY 2006 Emission Summary Recorded in ED Facility ID M 0700122
Facility Name: Fountain Power Boats Permit#(s): 06175T10
Hazardous Air Pollutants (HAPs) Actual Emissions % Difference
and/or Toxic Air Pollutants (TAPs) (Pounds/Year)
Pollutant CAS CY 2006 CY 2005
from ED from Fees
Toluene 108-88-3 1,244.00 1,272.00 -2.2%
Xylene 1 330-20-7 V 1,247.00 1,165.00 7.0%
Largest Individual HAP Styrene 6,192.00 lbs
Total HAP Emissions 99,855.00
lbs
DAQ's Comments Regarding Inventory
10/10/2007 Page 2 of 2

LO I—f
Inventory Certification Form(Title V)
Facility Name: Fountain Power Boats Facility ID : 0700122
1653 Whichards Beach Road SR 1166 Permit : 06175
Washington,NC 27889 County • Beaufort
DAQ Region : WARO
North Carolina Department of Environment and Natural Resources
Division of Air Quality
Air Pollutant Point Source Emissions Inventory—Calendar Year 2006
These forms must be completed and returned even if the facility did not operate or emissions were ern
The legally defined "Responsible Official" of record for,your facility-is Reggie Fountain
This person or one that meets the definition below must sign this certification form.
The official submitting the information must certify that he/she complies with the requirements as specified in Title 15A
NCAC 2Q.0520(b)which references and follows the federal definition.40 CFR Part 70.2 defines a responsible as meaning one
of the following:
1.For a corporation: a president,secretary, treasurer,or vice—president of the corporation in charge of a principal
business function,or any other person who performs similar policy or decision making functions for the overall
operation of one or more manufacturing,production,or operating facilities applying for a or subject to a permit and
either
I.the facilities employ more than 250 persons or have gross annual sales or expenditures exceeding$25
million(in second quarter 1980 dollars); or
ii.the delegation of authority to such representatives is approved in advance by the permitting authority;
2.For partnership or sole propietorship;a general partner or the proprietor, respectively;
3. for a muncipality,state, federal,or other public agency includes the chief executive officer having responsibility for the
overall operations of a principal geographic unit of the agency(e.g.,a Regional Administrator of EPA).
CERTIFICATION STATEMENT-
after all
certify that I am the responsible official for this facility,as described above,and hereby certify that the information contained
in this air emissions report, including attached calculations and documentation, is true,accurate and complete. (Subject to legal
enalities of up to$10,000 per occurrence and possible imprisonment as outlined in G.S.§143-215.3(a)(2))
Responsible Official's Signature Below use blue ink): Date Signed:
Printed Name: -R�aD'E'F^»main 4 ut p/q-4,ep1S6N
Signature:
This form applres to Title V facilities. If this facility is not classified as Title V,please telephone your regional office Emission
Inventory contact at once for proper forms.
Email address of Responsible Official: D
D �
Information on this Form cannot be held confid i J U N 2 7 2007
DA0 WARO

Fountain Powerboats
2006 Emission Inventory Calculations
VOC,HAP and PM Emission Calculations
This document describes actual Volatile Organic Compound (VOC),Particulate Matter(PM)and
Hazardous Air Pollutant(HAP)emissions from the facility. Emission calculations utilize the
Unified Emission Factors(UEF)for open molding of composites dated July 23, 2001. An
attached table lists the basis for each emission factor(E-factor)utilized in the emissions
calculations. A copy of the July 23, 2001 UEF table is also included with this letter.
The gelcoat spray guns are atomized. The styrene emission factor used for gelcoats is from the
gelcoat application row of the UEF table. The Methyl Methacrylate(MMA)emission factor used
for gelcoats is based on the MMA gelcoat application row of the UEF table. The resin guns are
non-atomized. The emission factor for lamination resins is taken from the mechanical non-
atomized row of the UEF table.
Small quantities of highly reactive liquid organic perioxide solutions(e.g.,Hi Point 90)are used
by the reinforced plastics industry to initiate the polymerization reaction in the resin or gelcoat
material. Emission estimates in this permit application are based on the composite Manufacturer
Associations' study, "Emission Factors for Liquid Organic Peroxide Catalysts used in the Open
Molding of Composites." The emission factor for Dimethyl Phthalate(DMP)or other utilized
organic is 0.04%of the available DMP by weight or 0.0144(0.04 x 36%).
Usage of and thus emissions from other raw materials(e.g., mold cleaners and sealers,etc.)at the
Washington plant are smaller in nature. Emissions from these other material usages and/or
chemicals utilize a similar methodology or conservatively assume all of the chemical is emitted
(e.g.,solvents in paints used).
Particulate emissions from painting are calculated assuming a 1%total weight loss with 50
percent of those emissions PMIO and 25 percent of those emissions PM,.;as a conservative
estimate with no controls.
Particulate emissions from paint usage:
10,000 lbs paint bought plant-wide
assume 1%loss as particulate emissions, 50%of that is PMIo and 25% is PM2.5
10,0001bs x 0.01 = 100 pounds PM/year=0.05 tons PM/year
100 lbs PM x 0.5 =50 pounds PMIo/year=0.025 tons PMIo/year
100 lbs PM x 0.25 =25 pounds PM,.s/year=0.013 tons PM,.;/year
Particulate emissions from hull and deck grinding:
1,300,000 lbs resin and gelcoat bought plant-wide
assume 1%loss with 25%of that emitted as particulate emissions, 50%of that is PMto and 25%
is PM,.;.
1,300,000 lbs x 0.01 x 0.25=3,250 pounds PM/year= 1.63 tons PM/year
3,250 lbs PM x 0.5= 1,625 pounds PMtWyear=0.81 tons PMto/year
3,250 lbs PM x 0.25=813 pounds PM,.;/year=0.41 tons PM,.;/year

Unified Emission Factors for Open Molding of Composites
July 23, 2001
Emission Rate in Pounds of Styrene Emitted per Ton of Resin or Gelcoat Processed
Styrene content in resin/gelcoat,%(1) <33(2) L33l
34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 >50(2)
Manual 0.126 x%styrene x 2000 83 89 94 100 106 112 117 123 129 134 140 146 152 157 163 169 174 180 1 ((0.286 x%styrene)•0.0529)x 2000
Manual w/Vapor Suppressed Resin VSR(3) Manual emission factor[listed above] x (1 (0.50 x specific VSR reduction factor for each resin/suppressant formulation))
Mechanical Atomized 0.189 x%styrene x 2000 111 126 1 140 1 154 1 168 1 183 1 197 211 225 240 1 254 f 268 1 283 1 297 1 311 325 1340 1354 1 ((0.714 x%styrene)-0.18)x 2000
Mechanical Atomized with VSR n' Mechanical Atomized emission factor[listed above] x (1 - (0.45 x speck VSR reduction factor for each resin/suppressant formulation))
Mechanical Atomized Controlled Spray'" 0.130 x%styrene x 2000 86 1 97 1 108 1 119 1 130 141 1 152 1 163 1 174 185 198 1207 1 218 1 229 1 240 1 251 1 262 1 273 0.77 x((0.714 x%styrene)-0.18)x 2000
Mechanical Controlled Spray with VSR Mechanical Atomized Controlled Spray emission factor[listed above] x (1 - (0.45 x specific VSR reduction factor for each resin/suppressant formulation))
Mechanical Non-Atomized 0.107 x%styrene x 2000 1 71 1 74 1 77 1 80 1 83 1 88 1 89 1 93 1 96 1 99 102 1 105 1 108 1 111 1 115 1 118 1 121 1 124 1 ((0.157 x%styrene)-0.0165)x 2000
Mechanical Non-Atomized with VSR'" Mechanical Non-Atomized emission factor[listed above] x (1 - (0.45 x specific VSR reduction factor for each resin/suppressant formulation))
Filament application 0.184 x%styrene x 2000 122 127 133 138 144 149 155 160 166 171 177 182 188 193 199 204 210 215 ((0.2746 x%styrene)-0.0298)x 2000
Filament application with VSR j3' 0.120 x%styrene x 2000 79 83 86 90 93 97 100 104 108 111 115 118 122 125 129 133 136 140 0.65 x((0.2746 x%styrene)-0.0298)x 2000
Gelcoat Application 0.445 x%styrene x 2000 294 315 336 356 377 398 418 439 460 481 501 522 543 564 584 605 626 646 ((1.03646 x%styrene)-0.195)x 2000
Gelcoat Controlled Spray Application 10 0.325 x%styrene x 2000 215 230 245 260 275 290 305 321 336 351 366 381 396 411 427 442 457 472 0.73 x((1.03646 x%styrene)-0.195)x 2000
Gelcoat Non-Atomized Application(8) SEE Note 9 below 196 205 214 223 232 241 250 259 268 278 287 296 305 314 323 332 341 350 ((0.4506 x%styrene)-0.0505)x 2000
Covered-Cure after Roll-Out Non-VSR process emission factor[listed above] x (0.80 for Manual <on 0.85 for Mechanical)
Covered-Cure without Roll-Out Non-VSR process emission factor[listed above] x (0.50 for Manual <or> 0.55 for Mechanical)
Emission Rate in Pounds of Methyl Methacrylate Emitted per Ton of Gelcoat Processed
MMA content in gelcoat,%Is) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 220
Gel coat application°' 15 30 45 60 75 90 105 120 135 150 165 180 195 210 225 240 255 270 285 0.75 x"/MMA x 2000
Notes
1 Including styrene monomer content as supplied,plus any extra styrene monomer added by the molder,but before addition of other additives such as powders,fillers,glass,..etc.
2 Formulas for materials with styrene content<33%are based on the emission rate at 33% constant emission factor expressed as tY ( pr percent of available styrene),and for styrene content>50%on the emission rate based on the extrapolated factor equations;these
are not based on test data but are believed to be conservative estimates. The value for"%styrene"in the formulas should be input as a fraction. For example,use the input value 0.30 for a resin with 30%styrene content by wt.
3 The VSR reduction factor is determined by testing each resin/suppressant formulation according to the procedures detailed in the CFA Vapor Suppressant Effectiveness Test.
4 SEE the CFA Controlled Spray Handbook for a detailed description of the controlled spray procedures.
5 The effect of vapor suppressants on emissions from filament winding operations is based on the Dow Filament Winding Emissions Study.
6 Including MMA monomer content as supplied,plus any extra MMA monomer added by the molder,but before addition of other additives such as powders,fillers,glass,...etc.
7 Based on gelcoat data from NMMA Emission Study.
8 SEE the July 17,2001 EECS report Emission Factors for Non-Atomized Application o/Gel Coats used In the Open Molding o/Composites for a detailed description of the non-atomized gelcoat testing.
9 Use the equation ((0.4506 x%styrene)-0.0505)x 2000 for gelcoats with styrene contents between 19%and 32%by wt.; use the equation 0.185 x%styrene x 2000 for gelcoats with less than 19%styrene content by wt.
UEF unified factors table revised July 23'01.xis

Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical
1037 Resin(Corve 8153) Mechanical Non-Atomized Styrene 44.50% 0.054
1328 Arjay 1201 Putty Mechanical Non-Atomized Styrene 30.00% 0.032
13292 IPS Adhesive Activator N/A--10%emitted per MSDS Benzoyl Peroxide 14.00% 0.014
13292 IPS Adhesive Activator N/A--10%emitted per MSDS Dibutyl Phthalate 80.00% 0.080
13293 IPS Adhesive N/A--assume all emitted Methacrylic Acid 5.00% 0.050
13293 IPS Adhesive Manual Methyl Methacrylate 65.00% 0.133
13512 Cherry Wood Stain N/A--assume all emitted Ethylbenzene 0.60% 0.006
13512 Cherry Wood Stain N/A--assume all emitted Glycol Ethers 8.00% 0.080
13512 Cherry Wood Stain N/A--assume all emitted Xylene(mixed isomers) 4.00% 0.040
13567 Resin(VEX-201-958-F) Mechanical Non-Atomized Styrene 35.00% 0.039
13665 Gelcoat(963WJ825) Gelcoat Application-MMA Methyl Methacrylate 8.46% 0.068
13665 Gelcoat(963WJ825) Gelcoat Application Styrene 19.26% 0.086
13706 AWLGARD Interior White Paint(WT8202) N/A--assume all emitted Glycol Ethers 2.00% 0.020
13706-ACT AWLGARD Converter(WT3201) N/A No reportable HAPs 0.00% 0.000
13794 3M Foam Fast 74 Cylinder Psray Adhesive N/A No reportable HAPs 0.00% 0.000
13864 Adhesive Integra N/A--assume all emitted Dibutyl Phthalate 0.36% 0.004
13864 Adhesive Integra N/A--assume all emitted Methyl Methacrylate 50.02% 0.500
14195 ALT Elastopor P1484OR N/A No reportable HAPs 0.00% 0.000
14321 Core-Bond B71 Adhesive Mechanical Non-Atomized Styrene 34.30% 0.039
14441 Black Barrier Gelcoat(96713J244) Gelcoat Application Styrene 31.77% 0.141
1446 Anmorcoate Yellow Gelcoat(951YA596) Gelcoat Application-MMA Methyl Methacrylate 8.80% 0.060
1446 Armorcoate Yellow Gelcoat(951YA596) Gelcoat Application Styrene 31.35% 0.140
Page 1 of 6

Fountain Powerboats Washington Plant
Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical
14540 Pitch Black Gelcoat(963BA025) Gelcoat Application-MMA Methyl Methacrylate 6.29% 0.053
14540 Pitch Black Gelcoat(963BA025) Gelcoat Application Styrene 23.80% 0.106
14617 Trulube Pearl(PBC36) N/A--assume all emitted Ethylbenzene 10.00% 0.100
14617 Trulube Pearl(PBC36) N/A--assume all emitted Xylene(mixed isomers) 35.00% 0.350
14618 Passion Pearl Pearl(PBC65) N/A--assume all emitted Ethylbenzene 10.00% 0.100
14618 Passion Pearl Pearl(PBC65) N/A--assume all emitted Xylene(mixed isomers) 30.00% 0.300
14618a Tangelo Pearl(PBC32) N/A--assume all emitted Ethylbenzene 10.00% 0.100
14618a Tangelo Pearl(PBC32) N/A--assume all emitted Xylene(mixed isomers) 35.00% 0.350
1500007 Dykem Blue 80600 N/A No reportable HAPs 0.00% 0.000
1500009 Gray Sand Primer(707-007X) N/A--assume all emitted Ethyl Acetate 2.00% 0.020
1500009 Gray Sand Primer(707-007X) N/A-assume all emitted Methyl Ethyl Ketone 11.50% 0.115
1500009 Gray Sand Primer(707-007X) N/A--assume all emitted Styrene 22.10% 0.221
1500110 Hi Point 90 Red(MEKP) N/A Dimethyl Phthalate 36.00% 0.014
1500230 Black Tooling Gelcoat(94513201) Gelcoat Application-MMA Methyl Methacrylate 4.37% 0.038
1500230 Black Tooling Gelcoat(9456201) Gelcoat Application Styrene 42.40% 0.251
1500230m Black Tooling Gelcoat(965BJ115) N/A--assume all emitted Methyl Alcohol 0.72% 0.007
1500230m Black Tooling Gelcoat(9658J115) Gelcoat Application Styrene 38.07% 0.199
1500500 Core-Bond B70 Adhesive Mechanical Non-Atomized Styrene 31.60% 0.034
1500600 Foam(Elastopor Pi5390R) N/A No reportable HAPs 0.00% 0.000
1500605 Foam(Elastopor P1001 U) N/A No reportable HAPs 0.00% 0.000
1575 Polycor 8%Wax Solution(970C949) Manual Styrene 92.00% 0.210
1675 3M Finesse It#05928 N/A No reportable HAPs 0.00% 0.000
1700 Patchaid(970XJ037) Manual Styrene 57.45% 0.111
Page 2 of 6

Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical
1700a Sealer N/A No reportable HAPs 0.00% 0.000
2055 Polyurethanes(Concept Acrylic) N/A--assume all emitted 0.00% 0.000
2055 Polyurethanes(Concept Acrylic) N/A--assume all emitted 1,2,4-Trimethylbenzene 5.00% 0.050
2055 Polyurethanes(Concept Acrylic) N/A--assume all emitted 2-Butoxyethyl Acetate 5.00% 0.050
2055 Polyurethanes(Concept Acrylic) N/A--assume all emitted Ethylbenzene 5.00% 0.050
2055 Polyurethanes(Concept Acrylic) N/A--assume all emitted N-Butyl Alcohol 5.00% 0.050
2055 Polyurethanes(Concept Acrylic) N/A--assume all emitted Styrene 1.00% 0.010
2055 Polyurethanes(Concept Acrylic) N/A-assume all emitted Xylene(mixed isomers) 30.00% 0.300
2378 Corian Joint Adhesive N/A-No emission per MSDS Methyl Methacrylate 40.00% 0.400
2476 Hi Point 90 Clear(MEKP) N/A Dimethyl Phthalate 36.00% 0.014
2817 Gray Sand Primer(707-007X) N/A--assume all emitted Ethyl Acetate 2.00% 0.020
2817 Gray Sand Primer(707-007X) N/A--assume all emitted Methyl Ethyl Ketone 11.50% 0.115
2817 Gray Sand Primer(707-007X) N/A--assume all emitted Styrene 22.10% 0.221
3525 Clear Hi-Gloss Additive(904-001X) N/A-assume all emitted Methyl Ethyl Ketone 14.20% 0.142
3525 Clear Hi-Gloss Additive(904-001X) N/A--assume all emitted Styrene 33.60% 0.336
3699 Speed Patchaid(970X900) Manual Styrene 50.12% 0.090
3895 BPO/5 Paste Catalyst N/A No reportable HAPs 0.00% 0.000
3896 K-Lite 750 Mechanical Non-Atomized Styrene 40.00% 0.047
3M4200 3M Adhesive Sealant 4200 N/A--assume all emitted Methylenebis(phenylisocyanate) 0.30% 0.003
4324 Polycor White Gelcoat(948WJ201) Gelcoat Application Styrene 40.00% 0.220
435 Marine Sealant Fast Cure 5200 N/A No reportable HAPs 0.00% 0.000
4628 Color Blender(DBC500) N/A--assume all emitted Ethylbenzene 1.50% 0.015
4628 Color Blender(DBC500) N/A--assume all emitted N-Butyl Alcohol 10.00% 0.100
Page 3 of 6

Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical
4628 Color Blender(DBC500) N/A--assume all emitted Toluene 1.50% 0.015
4628 Color Blender(DBC500) N/A--assume all emitted Xylene(mixed isomers) 10.00% 0.100
4629 Clear Coats N/A--assume all emitted Ethylbenzene 5.00% 0.050
4629 Clear Coats N/A--assume all emitted Methyl Isobutyl Ketone 20.00% 0.200
4629 Clear Coats N/A--assume all emitted Styrene 1.00% 0.010
4629 Clear Coats N/A--assume all emitted Toluene 10.00% 0.100
4629 Clear Coats N/A--assume all emitted Xylene(mixed isomers) 40.00% 0.400
4630 Reducers N/A--assume all emitted Ethylbenzene 1.00% 0.010
4630 Reducers N/A--assume all emitted Methyl Ethyl Ketone 40.00% 0.400
4630 Reducers N/A--assume all emitted n-Hexane 5.00% 0.050
4630 Reducers N/A--assume all emitted Toluene 30.00% 0.300
4630 Reducers N/A--assume all emitted Xylene(mixed isomers) 10.00% 0.100
4631 Deltron 2000 Basecoats N/A--assume all emitted 1,2,4-Trimethylbenzene 5.00% 0.050
4631 Deltron 2000 Basecoats N/A--assume all emitted 2-Butoxyethyl Acetate 5.00% 0.050
4631 Deltron 2000 Basecoats N/A--assume all emitted Ethylbenzene 5.00% 0.050
4631 Deltron 2000 Basecoats N/A--assume all emitted Methyl Ethyl Ketone 20.00% 0.200
4631 Deltron 2000 Basecoats N/A--assume all emitted Methyl Isobutyl Ketone 20.00% 0.200
4631 Deltron 2000 Basecoats N/A--assume all emitted N-Butyl Alcohol 20.00% 0.200
4631 Deltron 2000 Basecoats N/A--assume all emitted Nickel Compounds 1.00% 0.010
4631 Deltron 2000 Basecoats N/A--assume all emitted Toluene 30.00% 0.300
4631 Deltron 2000 Basecoats N/A--assume all emitted Xylene(mixed isomers) 20.00% 0.200
4635a DCX Hardener N/A--assume all emitted Hexamethylene diisocyanate 1.00% 0.010
4635a DCX Hardener N/A--assume all emitted Isophorone Diisocyanate 1.00% 0.010
Page 4 of 6

Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical
4635b DFX11 Hardener N/A--assume all emitted Isophorone Diisocyanate 5.00% 0.050
4635c Primer Surface Catalyst(K201) N/A--assume all emitted Ethyl Acetate 10.00% 0.100
4635c Primer Surface Catalyst(K201) N/A--assume all emitted Hexamethylene diisocyanate 1.00% 0.010
4635c Primer Surface Catalyst(K201) N/A--assume all emitted Toluene 10.00% 0.100
4923 Laminex Fillet Manual Styrene 30.00% 0.038
519 Poly-Bond B39 Adhesive Mechanical Non-Atomized Styrene 24.40% 0.031
5212100 3M Super Duty 05955 N/A--assume all emitted 1,2,4-Trimethylbenzene 1.00% 0.010
5221010 Sikaflex 291,White N/A--assume all emitted Xylene(mixed isomers) 5.00% 0.050
5223038 Tite Bond II Adhesive(Wood Glue) N/A No reportable HAPs 0.00% 0.000
6040 Polycor Black Gelcoat(944B025) Gelcoat Application-MMA Methyl Methacrylate 4.63% 0.038
6040 Polycor Black Gelcoat(944B025) Gelcoat Application Styrene 34.11% 0.158
647A Polyurethane Foam Part A N/A No reportable HAPs 0.00% 0.000
6478 Polyurethane Foam Part 8 N/A No reportable HAPs 0.00% 0.000
9427 Kantstick Maxi Pull N/A No reportable HAPs 0.00% 0.000
945CJ007 Tool Thinner(945CJ007) Gelcoat Application-MMA Methyl Methacrylate 4.50% 0.038
945CJ007 Tool Thinner(945CJ007) Gelcoat Application Styrene 45.23% 0.282
953WJ301 Base White Gelcoat(953WJ301) Gelcoat Application-MMA Methyl Methacrylate 5.00% 0.038
953WJ301 Base White Gelcoat(953WJ301) Gelcoat Application Styrene 29.06% 0.129
963GK131 HAP33 Sea Foam Gelcoat(963GK131) Gelcoat Application-MMA Methyl Methacrylate 6.16% 0.049
963GK131 HAP33 Sea Foam Gelcoat(963GK131) Gelcoat Application Styrene 22.23% 0.163
9631A507 Seattle Grey Gelcoat(9631A507) Gelcoat Application-MMA Methyl Methacrylate 5.56% 0.045
9631A507 Seattle Grey Gelcoat(9631A507) Gelcoat Application Styrene 21.87% 0.097
9631-281 Carolina Blue Gelcoat(9631-281) Gelcoat Application-MMA Methyl Methacrylate 6.14% 0.045
Page 5 of 6

Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical
9631-281 Carolina Blue Gelcoat(9631-281) Gelcoat Application Styrene 21.99% 0.098
963LA855 Cobalt Gelcoat(963LA855) Gelcoat Application-MMA Methyl Methacrylate 5.83% 0.045
963LA855 Cobalt Gelcoat(963LA855) Gelcoat Application Styrene 22.58% 0.101
963LA862 Midnight Gelcoat(963LA862) Gelcoat Application-MMA Methyl Methacrylate 5.63% 0.045
963LA862 Midnight Gelcoat(963LA862) Gelcoat Application Styrene 22.34% 0.099
963RH333 Red Gelcoat(963RH333) Gelcoat Application-MMA Methyl Methacrylate 5.81% 0.045
963RH333 Red Gelcoat(963RH333) Gelcoat Application Styrene 22.95% 0.102
963YA596 Prowler Yellow Gelcoat(963YA596) Gelcoat Application-MMA Methyl Methacrylate 5.79% 0.045
963YA596 Prowler Yellow Gelcoat(963YA596) Gelcoat Application Styrene 22.43% 0.100
963YJ133 Fighting Yellow Gelcoat(963YJ133) Gelcoat Application-MMA Methyl Methacrylate 6.11% 0.053
963YJ133 Fighting Yellow Gelcoat(963YJ133) Gelcoat Application Styrene 21.83% 0.097
NONE1 3M Perfect It 05936 N/A No reportable HAPs 0.00% 0.000
NONE12 Filler Bondo Manual Styrene 20.00% 0.025
NONE13 Adhesive(3M Super 77) N/A--assume all emitted n-Hexane 1.00% 0.010
NONE15 Cleaner(HPP5) N/A No reportable HAPs 0.00% 0.000
NONE17 Armorflex Base White Gelcoat(953WJ301) Gelcoat Application-MMA Methyl Methacrylate 5.00% 0.038
NONE17 Armorflex Base White Gelcoat(953WJ301) Gelcoat Application Styrene 29.06% 0.129
NONE2 3M Imperial 06044 N/A No reportable HAPs 0.00% 0.000
NONE20 Aday Putty Mechanical Non-Atomized Styrene 30.00% 0.032
NONE21 Styrene Monomer N/A--assume all emitted Styrene 100.00% 1.000
NONE22 Aqua Blue 200 N/A No reportable HAPs 0.00% 0.000
NONE5 Wax Honey(P5401520) N/A No reportable HAPs 0.00% 0.000
Page 6 of 6

Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 200E
1037 Usage(gal): 1,550.5 VOC Content(wt%): 0.445 VOCs(ibs): 729.0
Resin(Corve 8153) Usage(lbs): 13,500.0 HAP Content(wt%): 0.445 HAP-,(its): 729.0
Density(!h!gal): 8.71
CAS No Chemical Weight°/, E-Factor HAP'TAP Lbs
100-42-5 Styrene 44.50% 0.054 729.0
1328 Usage(gal). 215.0 VOC Content(wt%): 0.300 VOCs(lbs): 63.3
Arjay 1201 Putty Usage(lbs): 1,972.4 HAP Content(wt%). 0.300 HAPs(Ibs): 63.3
Density(lb/gal): 9.17
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
100-42-5 Styrene 30.00% 0.032 63.3
13292 Usage(gal): 563.0 VOC Content(wt%): 0.940 VOCs(lbs): 479.8
IPS Adhesive Activator Usage(lbs): 5,103.9 HAP Content twt%): 0.800 HAPs(ibs): 408.3
Density(Ibigal): 9.07
CAS No Chemical Weight% E-Factor HAPlTAP Lbs
84-74-2 Dibutyl Phthalate 80.00% 0.080 408.3
13293 Usage(gal): 3,515.0 VOC Content(wt%.): 0.700 VOCS(11 s): 5,150.1
IPS Adhesive Usage (lbs): 28,142.5 HAP Content(wt%): 0.650 HAPs(Ibs): 3,743.0
Density(ib/gal): 8.01
CAS No Chemical Weight% E-Factor HAPiTAP Lbs
80-62-6 Methyl Methacrylate 65.00% 0.133 3,743.0
13512 Usage(gal): 10.0 VOC Content(wt%): 0.813 VOCS(11 s): 59.7
Cherry Wood Stain Usage(lbs): 73.4 HAP Content(wt%): 0.12E HAPs(lbs): 9.2
Density(lb!gal): 7.34
CAS No Chemical Weight% E-Factor HAPITAP Lbs
100-41-4 Ethylbenzene 0.60% 0.006 0.4
N/A Glycol Ethers 8.00% 0.080 5.9
1330-20-7 Xylene(mixed isomers 4.00% 0.040 2.9
13567 Usage(gal): 112,877.1 VOC Content(wt%): 0.350 VOCs(lbs): 41,680.3
Resin(VEX-201-958-F) Usage(lbs):,082.604.2 HAP Content(wt%): 0.350 HAPs(lbs): 41,680.3
Density(lb/gal): 9.59
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
100-42-5 Styrene 35.00% 0.039 41,680.3
13665 Usage(gal): 12,644.E VOC Content(wt°o): 0.277 VOCs(lbs): 21,728.2
Gelcoat(963WJ825) Usage(lbs): 141,838.6 HAP Content(wt-o): 0.277 HAPs(I s): 21,729.7
Density(lb/gal): 11.22
CAS No Chemical t4'eight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 8.46% 0.068 9,574.1
100-42-5 Styrene 19.26% 0.086 12,155.6
©Value Environmental 6/11/2007 Page 1 of 12

fountain Powerboats Washington
gt Plant:Usage and VOC&HAP Emissions Year Ending: December 200E
13706 Usage (gal) 232.8 VOC Content(wt4-,3): 0.115 b`OCs(lbs): 327.0
AWLGARD Interior White Paint Usage(Ibs) 2,851.3 HAP Content iwt%,}: 0.020 HAPs(lbs) 57.0
(WT8202) Density(Ibigal) 12.25
CAS No Chemical Weight% E-Factor HAPITAP Lbs
N/A Glycol Ethers 2.00% 0.020 57.0
13706-ACT
Usage(gal). 84.5 VOC Content(wt`%). 0.094 VOCs(lbs). 73.7
AWLGARD Converter(WT3201) Usage(lbs): 786.8 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(Ibiaal): 9.31
CAS No Chemical Weight% E-Factor HAPITAP Lbs
No reportable HAPs 0.00% 0.000 0.0
13794 Usage(gal): 1,513.4 VOC Content(wt',o): 0.775 VOCs(lbs): 7,094.1
3M Foam Fast 74 Cylinder Usage(Ibs): 9,150.7 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Psray Adhesive Density(Ib/gal): 6.05
CAS No Chemical Weight% E-Factor HAPITAP Lbs
No reportable HAPs 0.00% 0.000 0.0
13864 Usage(gal): 1,184.4 VOC Content(wt°%,I: 0.504 VOCs(lbs): 5,297.7
Adhesive Integra Usage(lbs): 10,515.2 HAP Content(wt%): 0.504 [HAPs(lbs): 5,297.E
Density(lb!gal): 8.88
CAS No Chemical Weight° E-Factor HAPITAP Lbs
84-74-2 Dibutyl Phthalate 0.36% 0.004 37.9
80-62-6 Methyl Methacrylate 50.02% 0.500 5,259.7
14195 ALT Usage(gat,: 51.6 VOC Content(vA%): 0.000 VOCs(lbs): 0.0
Elastopor P14840R Usage(lbs): 460.0 HAP Content(wt 10): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 8.92
CAS No Chemical Weight% E-Factor HAPJTAP Lbs
No reportable HAPs 0.00% 0.000 0.0
14321 Usage(gal): 28,387.0 VOC Content(w4%): 0.343 VOCs(ibs): 8,659.0
Core-Bond B71 Adhesive Usage(Ibs}: 224,910.0 HAP Content(wt;o): 0.343 HAPs Psi- 8,659.0
Density(lb/gal): 7.92
CAS No Chemical Weight"%° E-Factor HAPITAP Lbs
100-42-5 Styrene 34.30% 0.039 8,659.0
14441 Usage(gal): 1,732.3 VOC Content(wt%): 0.325 VOCs(lbs): 2,462.2
Black Barrier Gelcoat Usage(lbs): 16,542.2 HAP Content(vrt%): 0.318 HAPs(lbs): 2,339 1
967BJ244
Density(lb/gal): 9.55
CAS No Chemical Weiaht"%o E-Factor HAPITAP Lbs
100-42-5 Styrene 31.77% 0.141 2,339.1
©Value Environmental 6/11/2007 Page 2 of 12

Fountain Powerboats Washingfon Plant:Usage and VOC&HAP Emissions Year Ending: December 2006
1446 Jsage(gal): 30.2 VOC Content(��t .i: 0.394 VOCs(IbSI 55.6
Armorcoate Yellow Gelcoat Usage(Ibs): 290.0 HAP Content(wt%): 0.402 [-LHAPs(lbs): 57.9
(951 YA596)
Density(lblgal): 9.59
CAS No Chemical Weight ,o
g E-Factor HAPrTAP Lbs
80-62-6 Methyl Methacrylate 8.80% 0.060 17.4
100-42-5 Styrene 31.35% 0.140 40.5
14540 Usage(gal): 318.7 VOC Content(wt%): 0.301 VOCs(lbs): 537.5
Pitch Black Gelcoat(963BA025) Usage(ibs): 3,394.3 HAP Content(wt%): 0.301 HAPs(lbs): 537.7
Density(lb/gal): 10.65
CAS No Chemical Weight g E-Factor HAY;TAF Lbs
80-62-6 Methyl Methacrylate 6.29% 0.053 178.2
100-42-5 Styrene 23.80% 0.106 359.5
14617 Usage(gal): 26.2 VOC Content(vet%). 0.800 VOCs(lbs): 164.4
Trulube Pearl(PBC36) Usage(lbs): 205.5 HAP Content(wt%): 0.450I HAPs(lbs): 92.5
Density(lb;gal): 7.84
CAS No Chemical Weight% E-Factor HAPITAP Lbs
100-41-4 Ethylbenzene 10.00% 0.100 20.6
1330-20-7 Xylene(mixed isomers 35.00% 0.350 71.9
14618 Usage(gal): 8.7 VOC Content(wt%): 0.900 VOCs(lbs): 61.6
Passion Pearl Pearl(PBC65) Usage(lbs): 68.5 HAP Content(wt%): 0.400 HAPs(lbs): 27.4
Density(Ibigal): 7.84
CAS No Chemical Weight E-Factor HAP/TAP Lbs
100-41-4 Ethylbenzene 10.00% 0.100 6.8
1330-20-7 Xylene(mixed isomers 30.00% 0.300 20.5
14618a Usage(gal): 6.6 VOC Content fwt%): 0.800 VOCs(lbs): 41.5
Tangelo Pearl(PBC32) Usage(lbs): 51.9 HAP Content(wt'o): 0.450 HAPs(lbs): 23.3
Density(lb/gal): 7.84
CAS No Chemical Weight°% E-Factor HAP/TAP Lbs
100-41-4 Ethylbenzene 10.00% 0.100 5.2
1330-20-7 Xylene(mixed isomers 35.00% 0.350 18.2
1500007 Usage(gal): 3.9 VOC Content(wt%): 1.000 VOCs(lbs): 27.9
Dykem Blue 80600 Usage(lbs): 27.9 PHAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 7.09
CAS No Chemical Weight 44: E-Factor HAPiTAP Lbs
No reportable HAPs 0.00% 0.000 0.0
1500009 Usage(gal): 96.0 VOC Content(wt%): 0.356 VOCs(lbs): 37(.5
Gray Sand Primer(707-007X) Usage(Ibs): 1,040.8 HAP Content(wt%): 0.336 HAPs(Ibs): 349.7
Density(lb/gal): 10.84
CAS N;, Chem+ca; Lei ht°- E r a� a: _ Factor Hr.PT:,P Lam.
78-93-3 Methyl Ethyl Ketone 11.50% 0.115 119.7
100-42-5 Styrene 22.10% 0.221 230.0
©Value Environmental 6/11/2007 Page 3 of 12

Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2006
1500110
Usage(gal): 1,776.1 VOC Content(wt%): 0.360 VOCs(lbs): 228.7
Hi Point 90 Red(MEKP) Usage(lbs): 15,879.0 HAP Content(wt%): 0.360 HAPs(lbs): 228.7
Density(lb/gal): 8.94
CAS No Chemical Weight% E-Factor HAP'TAP Lh:
131-11-3 Dimethyl Phthalate 36.00% 0.014 228.7
1500230 Usage(gal): 74.3 VOC Content(wt%): 0.468 VOCs(lbs): 194.4
Black Tooling Gelcoat(945B201) Usage(Ibs): 675.0 HAP Content(wt%): 0.468 HAPs(lbs): 194.4
Density(lb/gal): 9.09
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 4.37% 0.038 25.3
100-42-5 Styrene 42.40% 0.251 169.1
1500230m Usage(gal): 69.3 VOC Content(wt%): 0.388 VOCs(lbs): 129.9
Black Tooling Gelcoat Usage(lbs): 630.0 HAP Content(wt%): 0.388 HAPs(lbs): 129.9
(965BJ115) Density(lb/gal): 9.09
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
67-56-1 Methyl Alcohol 0.72% 0.007 4.5
100-42-5 Styrene 38.07% 0.199 125.4
1500500 Usage(gat): 3,687.0 VOC Content(wt%): 0.316 VOCs(lbs): 748.3
Core-Bond B70 Adhesive Usage(lbs): 22,139.7 HAP Content(wt%): 0.316 HAPs(Ibs): 748.3
Density(Ib/oa!): 6.00
CAS No Chemical Weight% E-Factor HAPITAP Lbs
100-42-5 Styrene 31.60% 0.034 748.3
1500600 Usage(gal): 77.9 VOC Content(wt%o): 0.000 VOCs(lbs): 0.0
Foam(Elastopor P15390R) Usage(lbs): 706.0 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Density(lb/gal): 9.06
CAS No Chemical Weight%o E-Factor H 9 APiTAP Lbs
No reportable HAPs 0.00% 0.000 0.0
1500605 Usage(gal): 3,001.4 VOC Content(wt%): 0.000 VOCs(lbs): 0.0
Foam(Elastopor P1001U) Usage(lbs): 30,674.0 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Density(lb/gal): 10.22
CAS No Chemical Weight°4, E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
1575 Usage(gal): 3.0 VOC Content(wt%): 0.921 VOCs(lbs): 4.7
Polycor 8%Wax Solution Usage(lbs): 22.5 HAP Content(wt%): 0.920 HAPs(lbs): 4.7
(970C949) Density(Ib.'ga!): 7.50
CAS No Chemical Weight°;"� E-Factor HAPiTAP Lbs
100-42-5 Styrene 92.00% 0.210 4.7
©Value Environmental 6/11/2007 Page 4 of 12

Fountain Powerboats Washington Plant:Usage and VOC 8 HAP Emissions Year Ending: December 2006
1675 Usage(gal): 22.5 VOC Content(wt%): 0.638 VOCs(ibs): 119.7
3M Finesse It#05928 Usage(lbs): 187.7 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 8.34
CAS No Chemical Weight 1% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
1700 Usage(gal): 282.1 VOC Content(wt%). 0.574 VOCs(lbs): 269.E
Patchaid(970XJ037) Usage(lbs): 2,421.0 HAP Content(wt%): 0.575 HAPs(lbs): 269.7
Density(lb/gal): 8.68
CAS No Chemical Weight% E-Factor HAP?TAP Lbs
100-42-5 Styrene 57.45% 0.111 269.7
1700a Usage(gal): 48.9 VOC Content(wt%): 0.358 VOCs(lbs): 215.E
Sealer Usage (Ibs): 602.7 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 12.32
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000
0.0
2055 Usage(gal): 29.0 VOC Content(wt%): 0.690 VOCs(lbs): 180.E
Polyurethanes(Concept Acrylic) Usage(Ibs): 261.7 HAP Content(wt%): 0.360 HAPs(lbs): 94.2
Density(Ib/gal): 9.02
CAS No Chemical Weight% E-Factor HAPiTAP Lbs
100-41-4 Ethylbenzene 5.00% 0.050 13.1
100-42-5 Styrene 1.00% 0.010 2.6
1330-20-7 Xylene(mixed isomers 30.00% 0.300 78.5
2378 Usage(gal): 0.7 VOC Content(wt%): 0.400 VOCs(lbsy 2.8
Conan Joint Adhesive Usage(lbs): 7.0 HAP Content(vWlo: 0.400 HAPs(lbs): 2.8
Density(iblgal): 10.17
CAS No Chemical V."eight% E-Factor HAP(TAP Lbs
80-62-6 Methyl Methacrylate 40.00% 0.400 2.8
2476 Usage(gal): 469.3 VOC Content(wt°/,): 0.360 VOCs(lbs): 60.4
Hi Point 90 Clear(MEKP) Usage(lbs): 4,196.0 HAP Content(wt%): 0.360 HAPs(lbs): 60.4
Density(lb/gal): 8.94
CAS No Chemical Weight% E-Facto! HAPiTAP Lbs
131-11-3 Dimethyl Phthalate 36.00% 0.014 60.4
2817 Usage(gal): 231.81 VOC Content(wt/.): 0.356 VOCs(lbs): 894.5
Gray Sand Primer(707-007X) Usage{Ibs): 2.512.6 HAP Content(wt%): 0.336 HAPs(lbs): 844.2
Density(Iblgal): 10.84
CAS No Chemical Weight% E-Factor HAPfTAP Lbs
78-93-3 Methyl Ethyl Ketone 11.50% 0.115 289.0
100.42-5 Styrene 22.10% 0.221 555.3
©Value Environmental 6/11/2007 Page 5 of 12

is -r
Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions'' Year Ending. December 200E
3525 Usage(gal) 16.0 VOC Content('v;tO.): 0.478 VOCs (lbs): 65.1
Clear Hi-Gloss Additive(904- Usage(Ibs): 136.1 HAP Content(avt%): 0.478 HAP-,(lbs): 65.1
001X) Density(Ib/gal) 8.51
CAS No Chemical Weight 0". E-Far_tar HAPITAP Lbs
78-93-3 Methyl Ethyl Ketone 14.20% 0.142 19.3
100-42-5 Styrene 33.60% 0.336 45.7
3699 Usage(gal): 21.7 VOC Content(wt%): 0.501 VOCs(lbs): 17.3
Speed Patchaid(970X900) Usage(Ibs): 192.0 HAP Content(wt%): 0.501 HAPs(lbs): 17.3
Density(loyal): 8.83
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
100-42-5 Styrene 50.12% 0.090 17.3
3895 Usage(gal): 2,663.0 VOC Content(wt%): 0.200 VOCs(lbs): 5,152.E
BPO/5 Paste Catalyst Usage(lbs): 25,762.9 HAP Content(wt%): 0.000 HAPs(lbs): OA
Density(lb/gal): 9.67
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
3896 Usage(gal): 342.0 VOC Content(wt%): 0.400 VOCs(lbs}: 79.6
K-Lite 750 Usage(lbs): 1,711.4 HAP Content(wt%): 0.400 HAPs(lbs): 79.6
Density(lb/gal): 5.00
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
100-42-5 Styrene 40.00% 0.047 79.6
3M4200 Usage(gal): 84.6 VOC Content(wt%): 1.000 VOCs(Ibs): 832.E
3M Adhesive Sealant 4200 Usage(lbs): 832.E HAP Content(wt°,o): 0.003 HAPs(Ibs): 2.5
Density(ib/gal): 9.84
CAS No Chemical Weight% E-Factor HARi
TAP Lbs
101-68-8 Methylenebis(phenylis 0.30% 0.003 2.5
4324 Usage(gal): 2,160.0 VOC Content(wt%): 0.400 VOCs(Ibs): 4,974.3
Polycor White Gelcoat Usage(Ibs): 22,662.0 HAP Content(wt%): 0.400 HAPs fibs): 4,974.3
(948WJ201) Density(lb/gal): 10.49
CAS No Chemical Weight% E-Factor HAPJAP Lbs
100-42-5 Styrene 40.00% 0.220 4,974.3
435 Usage(gal): 133.1 VOC Content(wt%): 0.020 VOCs(lbs): 29.5
Marine Sealant Fast Cure 5200 Usage(lbs}: 1,476.E HAP Content(wt%): 0.000 HAPs Obs): 0.0
Density(lb/gal): 11.09
CAS No Chemical Weiaht% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
©Value Environmental 6/11/2007 Page 6 of 12

Fountain Powerboats Washington Plant:Usage and VOC 8 HAP Emissions Year Ending. December 2006
4628 Usage(gal,: 38.2 VOC Cotiierit(wt'ii?: 1.000 VOCs(Itb) 296.4
Color Blender(DBC500) Usage(Ibs) 296.4 HAP Content(wfj,,,,): 0.130 HAPs(ibs) 38.5
Density(ib!g; 7.76
CAS N% Chemical 'Welg;It S' E-Factor HA:,-,AP L!.s
100-41-4 Ethylbenzene 1.50% 0.015 4.4
108-88-3 Toluene
1.50/0 0.015 4.4
1330-20-7 Xylene(mixed isomers 10.00% 0.100 29.6
4629 Usage(gal): 161.9 VOC Content(wt%): 0.508 VOCs(Ibs): 653.6
Clear Coats Usage(lbs): 1,287.1 HAP Content(wtl, ): 0.760 HAPs(lbs): 978.2
Density(Ib/gal): 7.95
CAS No Chemical Weigh' o E-Factor HAP/TAP Lbs
100-41-4 Ethylbenzene 5.00% 0.050 64A
108-10-1 Methyl Isobutyl Ketone 20.00% 0.200 257.4
100-42-5 Styrene 1.00% 0.010 12.9
108-88-3 Toluene 10.00% 0.100 128.7
1330-20-7 Xylene(mixed isomers 40.00% 0.400 514.8
4630 Usage(gal): 327.2 VOC Content(wt°b): 1.000 VOCs(lbs): 2,262.4
Reducers Usage(lbs): 2,262.4 HAP Content(wt%): 0.860 HAPs(lbs): 1,945.7
Density(Ib/gal): 6.91
CAS No Chemical Weight% E-Factor HAP TAP Lbs
100-41-4 Ethylbenzene 1.00% 0.010 22.6
78-93-3 Methyl Ethyl Ketone 40.00% 0.400 905.0
110-54-3 n-Hexane 5.00% 0.050 113.1
108-88-3 Toluene 30.00% 0.300 678.7
1330-20-7 Xylene(mixed isomers 10.00% 0.100 226.2
4631 Usage(gal): 164.9 VOC Content(vA%): 0.860 VOCs(lbs): 1,206.3
Deltron 2000 Basecoats Usage tlbs): 1,402.7 HAP Content(wt%). 0.960 HAPs(Ibs}; 1,346.6
Density(lb/gal): 8.51
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
100-41-4 Ethylbenzene 5.00% 0.050 70.1
78-93-3 Methyl Ethyl Ketone 20.00% 0.200 280.5
108-10-1 Methyl Isobutyl Ketone 20,00% 0.200 280.5
N/A Nickel Compounds 1.00% 0.010 14.0
108-88-3 Toluene 30.00% 0.300 420.8
1330-20-7 Xylene(mixed isomers 20.00% 0.200 280.5
4635a Usage(gal): 14.7 VOC Content!wt%): 0.161 VOCs(Ibs): 21.2
DCX Hardener Usage(lbs): 131.8 HAP Content,'v"M : 0.010 HAPs(lbs.: 1.3
Density(Iblgal): 8.96
CAS P<o Chemical Weigh.?j� E-Factor HAPITAP Lbs
822-06-0 Hexamethylene diisoc 1.00% 0.010 1.3
©Value Environmental 6/11/2007 Page 7 of 12

Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2006
4635c Usage(gal): 13.4 VOC Content(wt°::i 0.583 VOCs(bs): 63.4
Primer Surface Catalyst(K201) Usage(lbs): 108.9 HAP Content(wt%): 0.110 HAPs(lbs): 12.0
Density(Iblgal): 8.15
-,s N Chemical Weight% E-Factor HAP/TAP Lbs
822-06-0 Hexamethylene diisoe 1.00% 0.010 1.1
108-88-3 Toluene 10.00% 0.100 10.9
4923 Usage(gal): 161.0 VOC Content(wt%): 0.300 VOCs(lbs): 50.8
Laminex Fillet Usage(Ibs;: 1,342.7 HAP Content(wt%): 0.300 HAPs(Ibs): 50.8
Density(lb/gal): 8.34
CAS No Chemical Weight% E-Factor HAPlTAP Lbs
100-42-5 Styrene 30.00% 0.038 50.8
519 Usage(gal): 2,421.0 VOC Content(wt%): 0244 VOCs(lbs): 681.9
Poly-Bond B39 Adhesive FUsage(lbs): 22,210.3 HAP Content(wt%): 0244 HAPs(Ibs): 681.9
Density(Ib/gal): 9.17
CAS Nu Chemical Weight% E-Factor HAP/TAP Lbs
100-42-5 Styrene 24.40% 0.031 681.9
5221010 Usage(gal): 6.4 VOC Content(wt%): 0.082 VOCs(lbs): 5.2
Sikaflex 291,White Usage(lbs): 63.6 HAP Content(wt%): 0.050 HAPs(lbs): 3.2
Density(lb/gal): 9.92
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
1330-20-7 Xylene(mixed isomers 5.00% 0.050 3.2
5223038 Usage(ga!): 17.0 VOC Content(wt%): 0.012 VOCs(lbs): 1.9
Tde Bond II Adhesive(Wood Usage(Ibs): 154.7 HAP Content(wt%): 0.0001 HAPs(lbs): 0.0
Glue) Density(Ibigal): 9.10
CAS No
Chemical Weight°!° E-Factor HAPTAP Lbs
No reportable HAPs 0.00% 0.000 0.0
6040 Usage(gal): 565.9 VOC Content(wt%): 0.387 VOCs(lbs): 1,117.2
Polycor Black Gelcoat(944B025) Usage(lbs): 5,730.0 HAP Content(wt%): 0.387 r HAPs(lbs): 1.117.3
Density(lb/gal): 10.12
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 4.63% 0.038 214.9
100-42-5 Styrene 34.11% 0.158 902.5
647A Usage(gal): 94.1 VOC Content(wt%): 0.000 VOCs(lbs): 0.0
Polyurethane Foam Part A Usage(lbs): 972.7 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 10.34
CAS No Chemical Weight% E-Factor HAP TAD Lbs
No reportable HAPs 0.00% 0.000 0.0
©Value Environmental 6/11/2007 Page 8 of 12

Fountain Pa hindton Plant•U a and VOC&HAP Emissions :" Year Erid ' 43
g mg Decinnber 200E
647E Usage(gal). 100.1 VOC Content(wtN: 0.000 VOCs(Ihs): 0.0
Polyurethane Foam Part B Usage(4bs}: 1,001.E HAP Content(wf%): 0.000 HAPs(Ibs): 0.0
Density(Iblgai): 10.01
CAS No Chemical WYeight% E-Facicr HAPITAP Lbs
No reportable HAPs 0.00% 0.000 0.0
9427 Usage(gal): 21.0 VOC Content(wt°%): 1.000 VOCs(ibs): 128.7
Kantstick Maxi Pull Usage(ibs): 128.7 HAP Content(wt°/o): 0.000 HAPs(,bs : 0.0
Density(lb/gal): 6.13
CAS No Chemical Weight%.
g� E-, actor HAPITAP Lbs
No reportable HAPs 0.00% 0.000 0.0
945CJ007 Usage(gal): 0.0 VOC Content(vdi''.c): 0.497 VOCs(lbs): 0.0
Tool Thinner(945CJ007) Usage fibs): 0.0 HAP Content(wt%): 0.497 HAPs(lbs): 0.0
Density(lb?gal): 8.88
CAS No Chemical Weight% E-Factor HAPITAP Lbs
80-62-6 Methyl Methacrylate 4.50% 0.038 0.0
100-42-5 Styrene 45.23% 0.282 0.0
953WJ301 Usage(gal): 4.6 VOC Content(wt%): 0.341 VOCs(lbs): 8.3
Base White Gelcoat(953WJ301) Usage(lbs): 50.0 FIHAP Content(wt%): 0.341 HAPs(lbs): 8.3
Density(Iblual): 10.78
CAS No Chemical Weight% E-Factor HAPITAP Lbs
80-62-6 Methyl Methacrylate 5.00% 0.038 1.9
100-42-5 Styrene 29.06% 0.129 6.5
963GKI31 Usage fgai): 13.6 VOC Content(tvt%): 0284 VOCs(lbs): 31.8
HAP33 Sea Foam Gelcoat Usage(lbs): 150.0 HAP Content(wt%): 0.284 HAPs(lbs): 31.8
(963GK131)
Density(Ib,gai): 11.04
CAS No Chemical Weight% E-Factor HAPITAP Lbs
80-62-6 Methyl Methacrylate 6.16% 0.049 7.3
100-42-5 Styrene 22.23% 0.163 24.4
963IA507 Usage(gal): 4.1 VOC Content(wt%): 0.274 VOCs(lbs): 6.5
Seattle Grey Gelcoat(9631A507) Usage(lbs): 46.0 HAP Content(wt%): 0.274 HAPs Qbs} 6.5
Density(Iblgal): 11.19
GAS No Chemical Weight`,/. E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 5.56% 0.045 2.1
100-42-5 Styrene 21.87% 0.097 4.5
9631_281 Usage(gal): 56.0 VOC Content(wt%): 0.281 VOCs(lbs): 88.6
Carolina Blue Gelcoat(963L281) Usage(Ibs): 620.0 HAP Content(wt%): 0.281 HAPs(Ibs): 88.E
Density(lb/gal): 11.08
CAS No Chemical Weigh;`%o E-Factor HAPITAP Lbs
80-62-6 Methyl Methacrylate 6.14% 0.045 27.9
100-42-5 Styrene 21.99% 0.098 60.7
©Value Environmental 6/1 1 12 0 0 7 Page 9 of 12

fountain Powerboats Washin on Plant:Usa a and VOC 8 HAP Emissions
Year End� g � ing. 'December 2006
963LA855 Usage(gal:: 499.1 VOC Content(Wt` r 0.284 VOCs(lbsl 775.9
Cobalt Gelcoat(963LA855) Usage(lbs,): 5.331.8 HAP Content(wt"/',): 0284 HAPs(lbs): 775.8
Density(!b!gal): 10.68
CAS No Chemical Weight`i:- E-Factor HAPITAP Lbs
80-62-6 Methyl Methacrylate 5.83% 0.045 239.9
100-42-5 Styrene 22.58% 0.101 535.8
963LA862 Usage(gan) 160.9 VOC Content(wt%'Il 0.280 VOCs(lbs): 246.0
Midnight Gelcoat(963LA862) Usage(Ibs). 1,704.0 HAP Content(vAOX.): 0.280 HAPs(lbs): 246.1
Density(lb/gal): 10.59
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 5.63% 0.045 76.7
100-42-5 Styrene 22.34% 0.099 169.4
963RH333 Usage(gal): 56.5 VOC Content(wt°o): 0.288 VOCs(Ibs): 88.4
Red Gelcoat(963RH333) Usage(lbs): 601.0 HAP Content(wt%): 0288 HAPs(lbs): 88.4
Density(lb/gal): 10.63
CAS No Chemical Weight%. E-Factor HAPITAP Lbs
80-62-6 Methyl Methacrylate 5.81% 0.045 27.0
100-42-5 Styrene 22.95% 0.102 61.4
963YA596 Usage(gall: 180.4 VOC Content(wt%): 0.282 VOCs(lbs): 281.7
Prowler Yellow Gelcoat Usage(lbs): 1,945.0 HAP Content(v.t%): 0.282 HAPs(lbs): 281.6
(963YA596) Density(ib?gal): 10.78
CAS No Chemical Weight%. E-Factor HAPITAP Lbs
80-62-6 Methyl Methacrylate 5.79% 0.045 87.5
100-42-5 Styrene 22.43% 0.100 194.1
963YJ133 Usage(gal): 90.9 VOC Content(wt%"): 0.279 VOCs(lbs): 150.7
Fighting Yellow Gelcoat Usage(lbs): 1,007.0 HAP Content(wt%): 0279 HAPs(Ibs): 150.7
(963YJ133) Density(lb/gal): 11.08
CAS No Chemical Weight% E-Factor HAPITAP Lbs
80-62-6 Methyl Methacrylate 6.11% 0.053 52.9
100-42-5 Styrene 21.83% 0.097 97.8
NONE1 Usage(gal): 53.8 VOC Content(wt%): 0.433 VOCs(lbs): 197.8
°-"l
3M Perfect It 05936 Usage Obs): 4572 HAP Content(wt : 0.000 HAP.(Ibs): 0.0
Density(lb/gal): 8.51
CAS No Chemical Weight 4' E-Factor HAPITAP Lbs
No reportable HAPs 0.00% 0.000 0.0
NONE12 Usage(gal): 49.0 VOC Content(wt`«): 0.200 1 VOCs(lbs): 11.8
Filler Bondo Usage(lbs): 470.0 HAP Content(wt%): 0.200 HAPs ilbs): 11.8
Density(Ib%gal): 9.59
CAS N^ Chemical, Weight",; E-Factor HAPITAP Lbs
100-42-5 Styrene 20.00% 0.025 11.8
©Value Environmental 6/11/2007 Page 10 of 12

Fountain Powerboats Washington.Plant:Usage and V668 HAP Emissions Year Ending December 2006
NONE13 Usage(gal): 26.1 VOC Content(wt%): 0.750 VOCs(lbs): 113.8
Adhesive(3M Super 77) Usage(Ibs): 151.8 HAP Content(wt%): 0.010 HAPs(lbs): 1.5
Density(lb/gal): 5.81
CAS No Chemical Weight% E-Factor HAPiTAP Lbs
110-54-3 n-Hexane 1.00% 0.010 1.5
NONE15 Usage(gal): 1,980.0 VOC Content(wt%): 0.1751 VOCs(lbs): 2,947.6
Cleaner(HPP5) Usage(lbs): 16,843.5 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 8.51
CAS No Chemical Weight°%. E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
NONE17 Usage(gal): 53.0 VOC Content(wt%): 0.341 VOCs(lbs): 95.0
Armorflex Base White Gelcoat Usage(lbs): 569.8 HAP Content(wt%): 0.341 HAPs(lbs): 95.0
(953WJ301) Density(lb/gal): 10.75
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 5.00% 0.038 21.4
100-42-5 Styrene 29.06% 0.129 73.7
NONE2 Usage(gal): 347.5 VOC Content(wt%): 0.660 VOCs(lbs): 2,411.7
3M Imperial 06044 Usage(lbs): 3,651.7 HAP Content(wt°/a): 0.0001 HAPs(lbs): 0.0
Density(lb/gal): 10.51
CAS No Chemical Weight% E-Factor HAP+T.AP Lbs
No reportable HAPs 0.00% 0.000 0.0
NONE20 Usage(gal): 60.0 VOC Content(wt%): 0.300 VOCs(Ibs): 17.7
Arjay Putty Usage(Ibs): 550.4 HAP Content(wt%): 0.300 HAPs(lbs): 17.7
Density(Ib/gal): 9.17
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
100-42-5 Styrene 30.00% 0.032 17.7
NONE21 Usage(gal): 5.1 VOC Content(wt%): 1.000 VOCs(lbs): 38.0
Styrene Monomer Usage(lbs): 38.0 HAP Content(wt%): 1.000 HAPs(Ibs): 38.0
Density(Ib/gal): 7.51
CAS No Chemical Weight /
E-Factor HAP(TAP Lbs
100-42-5 Styrene 100.00% 1.000 38.0
NONE22 Usage(gal): 36.0 VOC Content(wt%): 0.350 VOCs(lbs): 105.1
Aqua Blue 200 Usage(lbs): 300 22 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 8.34
CAS No Chemical Weight% E-Factor HAPJAP Lbs
No reportable HAPs 0.00% 0.000 0.0
©Value Environmental 6/11/2007 Page 11 of 12

Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2006
NONES Usaga (gal): 164.0 VOC Content'v�t`;;:i: 0.700 VOCs i (I„s). 804.5
Wax Honey(P5401520) Usage pigs) 1.148.9 HAP Content(wt°/,): 0.000 HRPs(ibs): 0.0
Density(lb%gal): 7.01
CAS No Chemical Weight 06 E-Far_tor HAPI-AP :-In
No reportable HAPs 0.00% 0.000 0.0
Month(lbs) Month(tons)
VOCs: 124,173 62.09
HAPs: 101,537 50.77
©Value Environmental 6/11/2007 Page 12 of 12

\ r
Foun>�a n Powerboats ashingtonJPlarVt"usage.&Emissions.
CAS No chemical Emissions (Ibs) Emissions (*.!3nsl
HAP? 0
84-74-2 Dibutyl Phthalate 446 0.22
131-11-3 Dimethyl Phthalate 289 0.14
100-41-4 Ethylbenzene 208 0.10
N/A Glycol Ethers 63 0.03
822-06-0 Hexamethylene diisocyanate 2 0.00
67-56-1 Methyl Alcohol 5 0.00
108-10-1 Methyl Isobutyl Ketone 538 0.27
80-62-6 Methyl Methacrylate 19,560 9.78
101-68-8 Methylenebis(phenylisocyanate 2 0.00
110-54-3 n-Hexane 115 0.06
N/A Nickel Compounds 14 0.01
No reportable HAPs 0 0.00
100-42-5 Styrene 76,192 38.10
108-88-3 Toluene 1,244 0.62
1330-20-7 Xylene(mixed isomers) 1,247 0.62
Subtotal 99,924 49.96
HAP?
141-78-6 Ethyl Acetate 82 0.04
78-93-3 Methyl Ethyl Ketone 1,613 0.81
Subtotal 1,695 0.85
Total 101,619 50.81
©Value Environmental 6/12/2007 Page 1 of 1

Wf
2006 Emissions Inventory Review/Data Tracking Form
Facility Name: F � Facility ID:
S b do
Permit Writer: Inspector: Confidential?
10
Initial Review/Data Entry
❑ If confidential information received, it has been properly labeled and stored. Sanitized copies have been
received for public use.
❑ Two copies of inventory were received and responsible official signed forms.
Inventory Review/Database Entry
DK—Forms appear to be complete [A-'Calculations and control efficiencies
supporting emissions appear correct
(y Calculations appear to add up ok C-1--All permitted sources and required
significant activities are quantified
❑ All compliance issues resulting from review are being addressed. (i.e.toxics, emission limitations
exceeded, unpermitted sources)
B—All volatile HAPS/TAPS are included in the VOC total
U.- All appropriate ID numbers are entered where they should be(Source, Stack)
❑ All changes made in the review by AQ staff are in both copies of the inventory before sending to
Central Office.
Comments:
Signature:
Date Billing Contact & General Data updated in FEES database l y )(O 101-
Date Emissions Data loaded into I-BEAM database 101 it) I o I
Remember: Confidential copies must be properly handled!
(S:\AIR\ ADMIN\2002 Emission Inventories\WARD inventory review form.doc)
WORO Copy

Facility Tetal CY 2006 Emission Summary Recorded in ED Facility ID #: 0700122
Facility Name: Fountain Power Boats Permit#(s): 06175T10
Criteria Pollutants Actual Emissions % Difference
(Tons/Year)
Pollutant CAS CY 2006 CY 2005
from ED from Fees
PM(TSP) TSP 1.68 1.68 0.0%
PM 10 PM 10 0.840000 0.840000 0.0%
PM2.5 PM2.5 0.420000 0.420000 0.0%
VOC (Meeting Federal Definition as VOC 62.09 73.51 -15.5%
photochemically reactive)
Hazardous Air Pollutants (HAPs) Actual Emissions % Difference
and/or Toxic Air Pollutants (TAPs) (Pounds/Year)
Pollutant CAS CY 2006 CY 2005
from ED from Fees
Nickel& Compounds, sum total mass, inc elemental 14.00 17.00 -17.6%
Nickel, soluble compounds as nickel (Component of NICKSOLCPDS 14.00 17.00 -17.6`6
3730241NIC)
Glycol ethers (total all individual glycol ethers-See 63.00 61.00 3.3%
h tip.11da q.state.nc.us/toxics/glycoo
Glycol Ethers, Unlisted(Specify& Component of GLYET-Other 63.00 61.00 3.3%
GLYET) (See http://daq.state.nc.us/toxics/glycol/)
Dibutylphthalate 84-74-2 X 446.00 278.00 60.40/0
Dimethyl phthalate 131-11-3 289.00 288.00 0.3%
Ethyl acetate 141-78-6 82.00 13.00 12.3%
Ethyl benzene 100-41-4 208.00 178.00 16.9%
Hexamethylene-1,6-diisocyanate 822-06-0 2.00 2.00 0.0%
Hexane, n- 110-54-3 115.00 106.00 8.5%
Methyl ethyl ketone 78-93-3 1,613.00 1,518.00 6.3%
Methyl isobutyl ketone 108-10-1 538.00 585.00 -8.0%
Methyl methacrylate 80-62-6 19,560.00 16,778.00 16.60/6
Methylene chloride 75-09-2 Not Not N/A
Reported Reported
Styrene 100-42-5 1/76,192.00 110,379.00 -31.0%
10/10/2007 Page 1 of 2

Facility Total CY 2006 Emission Summary Recorded in ED Facility ID M 0700122
Facility Name: Fountain Power Boats Permit#(s): 06175T10
Hazardous Air Pollutants (HAPs) Actual Emissions % Difference
and/or Toxic Air Pollutants (TAPs) (Pounds/Year)
Pollutant CAS CY 2006 CY 2005
from ED from Fees
Toluene 108-88-3 1,244.00 1,272.00 -2.2%
Xylene 1 330-20-7 V 1,247.00 1,165.00 7.0%
Largest Individual HAP Styrene 6,192.00 lbs
Total HAP Emissions 99,855.00
lbs
DAQ's Comments Regarding Inventory
10/10/2007 Page 2 of 2

LO I—f
Inventory Certification Form(Title V)
Facility Name: Fountain Power Boats Facility ID : 0700122
1653 Whichards Beach Road SR 1166 Permit : 06175
Washington,NC 27889 County • Beaufort
DAQ Region : WARO
North Carolina Department of Environment and Natural Resources
Division of Air Quality
Air Pollutant Point Source Emissions Inventory—Calendar Year 2006
These forms must be completed and returned even if the facility did not operate or emissions were ern
The legally defined "Responsible Official" of record for,your facility-is Reggie Fountain
This person or one that meets the definition below must sign this certification form.
The official submitting the information must certify that he/she complies with the requirements as specified in Title 15A
NCAC 2Q.0520(b)which references and follows the federal definition.40 CFR Part 70.2 defines a responsible as meaning one
of the following:
1.For a corporation: a president,secretary, treasurer,or vice—president of the corporation in charge of a principal
business function,or any other person who performs similar policy or decision making functions for the overall
operation of one or more manufacturing,production,or operating facilities applying for a or subject to a permit and
either
I.the facilities employ more than 250 persons or have gross annual sales or expenditures exceeding$25
million(in second quarter 1980 dollars); or
ii.the delegation of authority to such representatives is approved in advance by the permitting authority;
2.For partnership or sole propietorship;a general partner or the proprietor, respectively;
3. for a muncipality,state, federal,or other public agency includes the chief executive officer having responsibility for the
overall operations of a principal geographic unit of the agency(e.g.,a Regional Administrator of EPA).
CERTIFICATION STATEMENT-
after all
certify that I am the responsible official for this facility,as described above,and hereby certify that the information contained
in this air emissions report, including attached calculations and documentation, is true,accurate and complete. (Subject to legal
enalities of up to$10,000 per occurrence and possible imprisonment as outlined in G.S.§143-215.3(a)(2))
Responsible Official's Signature Below use blue ink): Date Signed:
Printed Name: -R�aD'E'F^»main 4 ut p/q-4,ep1S6N
Signature:
This form applres to Title V facilities. If this facility is not classified as Title V,please telephone your regional office Emission
Inventory contact at once for proper forms.
Email address of Responsible Official: D
D �
Information on this Form cannot be held confid i J U N 2 7 2007
DA0 WARO

Fountain Powerboats
2006 Emission Inventory Calculations
VOC,HAP and PM Emission Calculations
This document describes actual Volatile Organic Compound (VOC),Particulate Matter(PM)and
Hazardous Air Pollutant(HAP)emissions from the facility. Emission calculations utilize the
Unified Emission Factors(UEF)for open molding of composites dated July 23, 2001. An
attached table lists the basis for each emission factor(E-factor)utilized in the emissions
calculations. A copy of the July 23, 2001 UEF table is also included with this letter.
The gelcoat spray guns are atomized. The styrene emission factor used for gelcoats is from the
gelcoat application row of the UEF table. The Methyl Methacrylate(MMA)emission factor used
for gelcoats is based on the MMA gelcoat application row of the UEF table. The resin guns are
non-atomized. The emission factor for lamination resins is taken from the mechanical non-
atomized row of the UEF table.
Small quantities of highly reactive liquid organic perioxide solutions(e.g.,Hi Point 90)are used
by the reinforced plastics industry to initiate the polymerization reaction in the resin or gelcoat
material. Emission estimates in this permit application are based on the composite Manufacturer
Associations' study, "Emission Factors for Liquid Organic Peroxide Catalysts used in the Open
Molding of Composites." The emission factor for Dimethyl Phthalate(DMP)or other utilized
organic is 0.04%of the available DMP by weight or 0.0144(0.04 x 36%).
Usage of and thus emissions from other raw materials(e.g., mold cleaners and sealers,etc.)at the
Washington plant are smaller in nature. Emissions from these other material usages and/or
chemicals utilize a similar methodology or conservatively assume all of the chemical is emitted
(e.g.,solvents in paints used).
Particulate emissions from painting are calculated assuming a 1%total weight loss with 50
percent of those emissions PMIO and 25 percent of those emissions PM,.;as a conservative
estimate with no controls.
Particulate emissions from paint usage:
10,000 lbs paint bought plant-wide
assume 1%loss as particulate emissions, 50%of that is PMIo and 25% is PM2.5
10,0001bs x 0.01 = 100 pounds PM/year=0.05 tons PM/year
100 lbs PM x 0.5 =50 pounds PMIo/year=0.025 tons PMIo/year
100 lbs PM x 0.25 =25 pounds PM,.s/year=0.013 tons PM,.;/year
Particulate emissions from hull and deck grinding:
1,300,000 lbs resin and gelcoat bought plant-wide
assume 1%loss with 25%of that emitted as particulate emissions, 50%of that is PMto and 25%
is PM,.;.
1,300,000 lbs x 0.01 x 0.25=3,250 pounds PM/year= 1.63 tons PM/year
3,250 lbs PM x 0.5= 1,625 pounds PMtWyear=0.81 tons PMto/year
3,250 lbs PM x 0.25=813 pounds PM,.;/year=0.41 tons PM,.;/year

Unified Emission Factors for Open Molding of Composites
July 23, 2001
Emission Rate in Pounds of Styrene Emitted per Ton of Resin or Gelcoat Processed
Styrene content in resin/gelcoat,%(1) <33(2) L33l
34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 >50(2)
Manual 0.126 x%styrene x 2000 83 89 94 100 106 112 117 123 129 134 140 146 152 157 163 169 174 180 1 ((0.286 x%styrene)•0.0529)x 2000
Manual w/Vapor Suppressed Resin VSR(3) Manual emission factor[listed above] x (1 (0.50 x specific VSR reduction factor for each resin/suppressant formulation))
Mechanical Atomized 0.189 x%styrene x 2000 111 126 1 140 1 154 1 168 1 183 1 197 211 225 240 1 254 f 268 1 283 1 297 1 311 325 1340 1354 1 ((0.714 x%styrene)-0.18)x 2000
Mechanical Atomized with VSR n' Mechanical Atomized emission factor[listed above] x (1 - (0.45 x speck VSR reduction factor for each resin/suppressant formulation))
Mechanical Atomized Controlled Spray'" 0.130 x%styrene x 2000 86 1 97 1 108 1 119 1 130 141 1 152 1 163 1 174 185 198 1207 1 218 1 229 1 240 1 251 1 262 1 273 0.77 x((0.714 x%styrene)-0.18)x 2000
Mechanical Controlled Spray with VSR Mechanical Atomized Controlled Spray emission factor[listed above] x (1 - (0.45 x specific VSR reduction factor for each resin/suppressant formulation))
Mechanical Non-Atomized 0.107 x%styrene x 2000 1 71 1 74 1 77 1 80 1 83 1 88 1 89 1 93 1 96 1 99 102 1 105 1 108 1 111 1 115 1 118 1 121 1 124 1 ((0.157 x%styrene)-0.0165)x 2000
Mechanical Non-Atomized with VSR'" Mechanical Non-Atomized emission factor[listed above] x (1 - (0.45 x specific VSR reduction factor for each resin/suppressant formulation))
Filament application 0.184 x%styrene x 2000 122 127 133 138 144 149 155 160 166 171 177 182 188 193 199 204 210 215 ((0.2746 x%styrene)-0.0298)x 2000
Filament application with VSR j3' 0.120 x%styrene x 2000 79 83 86 90 93 97 100 104 108 111 115 118 122 125 129 133 136 140 0.65 x((0.2746 x%styrene)-0.0298)x 2000
Gelcoat Application 0.445 x%styrene x 2000 294 315 336 356 377 398 418 439 460 481 501 522 543 564 584 605 626 646 ((1.03646 x%styrene)-0.195)x 2000
Gelcoat Controlled Spray Application 10 0.325 x%styrene x 2000 215 230 245 260 275 290 305 321 336 351 366 381 396 411 427 442 457 472 0.73 x((1.03646 x%styrene)-0.195)x 2000
Gelcoat Non-Atomized Application(8) SEE Note 9 below 196 205 214 223 232 241 250 259 268 278 287 296 305 314 323 332 341 350 ((0.4506 x%styrene)-0.0505)x 2000
Covered-Cure after Roll-Out Non-VSR process emission factor[listed above] x (0.80 for Manual <on 0.85 for Mechanical)
Covered-Cure without Roll-Out Non-VSR process emission factor[listed above] x (0.50 for Manual <or> 0.55 for Mechanical)
Emission Rate in Pounds of Methyl Methacrylate Emitted per Ton of Gelcoat Processed
MMA content in gelcoat,%Is) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 220
Gel coat application°' 15 30 45 60 75 90 105 120 135 150 165 180 195 210 225 240 255 270 285 0.75 x"/MMA x 2000
Notes
1 Including styrene monomer content as supplied,plus any extra styrene monomer added by the molder,but before addition of other additives such as powders,fillers,glass,..etc.
2 Formulas for materials with styrene content<33%are based on the emission rate at 33% constant emission factor expressed as tY ( pr percent of available styrene),and for styrene content>50%on the emission rate based on the extrapolated factor equations;these
are not based on test data but are believed to be conservative estimates. The value for"%styrene"in the formulas should be input as a fraction. For example,use the input value 0.30 for a resin with 30%styrene content by wt.
3 The VSR reduction factor is determined by testing each resin/suppressant formulation according to the procedures detailed in the CFA Vapor Suppressant Effectiveness Test.
4 SEE the CFA Controlled Spray Handbook for a detailed description of the controlled spray procedures.
5 The effect of vapor suppressants on emissions from filament winding operations is based on the Dow Filament Winding Emissions Study.
6 Including MMA monomer content as supplied,plus any extra MMA monomer added by the molder,but before addition of other additives such as powders,fillers,glass,...etc.
7 Based on gelcoat data from NMMA Emission Study.
8 SEE the July 17,2001 EECS report Emission Factors for Non-Atomized Application o/Gel Coats used In the Open Molding o/Composites for a detailed description of the non-atomized gelcoat testing.
9 Use the equation ((0.4506 x%styrene)-0.0505)x 2000 for gelcoats with styrene contents between 19%and 32%by wt.; use the equation 0.185 x%styrene x 2000 for gelcoats with less than 19%styrene content by wt.
UEF unified factors table revised July 23'01.xis

Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical
1037 Resin(Corve 8153) Mechanical Non-Atomized Styrene 44.50% 0.054
1328 Arjay 1201 Putty Mechanical Non-Atomized Styrene 30.00% 0.032
13292 IPS Adhesive Activator N/A--10%emitted per MSDS Benzoyl Peroxide 14.00% 0.014
13292 IPS Adhesive Activator N/A--10%emitted per MSDS Dibutyl Phthalate 80.00% 0.080
13293 IPS Adhesive N/A--assume all emitted Methacrylic Acid 5.00% 0.050
13293 IPS Adhesive Manual Methyl Methacrylate 65.00% 0.133
13512 Cherry Wood Stain N/A--assume all emitted Ethylbenzene 0.60% 0.006
13512 Cherry Wood Stain N/A--assume all emitted Glycol Ethers 8.00% 0.080
13512 Cherry Wood Stain N/A--assume all emitted Xylene(mixed isomers) 4.00% 0.040
13567 Resin(VEX-201-958-F) Mechanical Non-Atomized Styrene 35.00% 0.039
13665 Gelcoat(963WJ825) Gelcoat Application-MMA Methyl Methacrylate 8.46% 0.068
13665 Gelcoat(963WJ825) Gelcoat Application Styrene 19.26% 0.086
13706 AWLGARD Interior White Paint(WT8202) N/A--assume all emitted Glycol Ethers 2.00% 0.020
13706-ACT AWLGARD Converter(WT3201) N/A No reportable HAPs 0.00% 0.000
13794 3M Foam Fast 74 Cylinder Psray Adhesive N/A No reportable HAPs 0.00% 0.000
13864 Adhesive Integra N/A--assume all emitted Dibutyl Phthalate 0.36% 0.004
13864 Adhesive Integra N/A--assume all emitted Methyl Methacrylate 50.02% 0.500
14195 ALT Elastopor P1484OR N/A No reportable HAPs 0.00% 0.000
14321 Core-Bond B71 Adhesive Mechanical Non-Atomized Styrene 34.30% 0.039
14441 Black Barrier Gelcoat(96713J244) Gelcoat Application Styrene 31.77% 0.141
1446 Anmorcoate Yellow Gelcoat(951YA596) Gelcoat Application-MMA Methyl Methacrylate 8.80% 0.060
1446 Armorcoate Yellow Gelcoat(951YA596) Gelcoat Application Styrene 31.35% 0.140
Page 1 of 6

Fountain Powerboats Washington Plant
Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical
14540 Pitch Black Gelcoat(963BA025) Gelcoat Application-MMA Methyl Methacrylate 6.29% 0.053
14540 Pitch Black Gelcoat(963BA025) Gelcoat Application Styrene 23.80% 0.106
14617 Trulube Pearl(PBC36) N/A--assume all emitted Ethylbenzene 10.00% 0.100
14617 Trulube Pearl(PBC36) N/A--assume all emitted Xylene(mixed isomers) 35.00% 0.350
14618 Passion Pearl Pearl(PBC65) N/A--assume all emitted Ethylbenzene 10.00% 0.100
14618 Passion Pearl Pearl(PBC65) N/A--assume all emitted Xylene(mixed isomers) 30.00% 0.300
14618a Tangelo Pearl(PBC32) N/A--assume all emitted Ethylbenzene 10.00% 0.100
14618a Tangelo Pearl(PBC32) N/A--assume all emitted Xylene(mixed isomers) 35.00% 0.350
1500007 Dykem Blue 80600 N/A No reportable HAPs 0.00% 0.000
1500009 Gray Sand Primer(707-007X) N/A--assume all emitted Ethyl Acetate 2.00% 0.020
1500009 Gray Sand Primer(707-007X) N/A-assume all emitted Methyl Ethyl Ketone 11.50% 0.115
1500009 Gray Sand Primer(707-007X) N/A--assume all emitted Styrene 22.10% 0.221
1500110 Hi Point 90 Red(MEKP) N/A Dimethyl Phthalate 36.00% 0.014
1500230 Black Tooling Gelcoat(94513201) Gelcoat Application-MMA Methyl Methacrylate 4.37% 0.038
1500230 Black Tooling Gelcoat(9456201) Gelcoat Application Styrene 42.40% 0.251
1500230m Black Tooling Gelcoat(965BJ115) N/A--assume all emitted Methyl Alcohol 0.72% 0.007
1500230m Black Tooling Gelcoat(9658J115) Gelcoat Application Styrene 38.07% 0.199
1500500 Core-Bond B70 Adhesive Mechanical Non-Atomized Styrene 31.60% 0.034
1500600 Foam(Elastopor Pi5390R) N/A No reportable HAPs 0.00% 0.000
1500605 Foam(Elastopor P1001 U) N/A No reportable HAPs 0.00% 0.000
1575 Polycor 8%Wax Solution(970C949) Manual Styrene 92.00% 0.210
1675 3M Finesse It#05928 N/A No reportable HAPs 0.00% 0.000
1700 Patchaid(970XJ037) Manual Styrene 57.45% 0.111
Page 2 of 6

Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical
1700a Sealer N/A No reportable HAPs 0.00% 0.000
2055 Polyurethanes(Concept Acrylic) N/A--assume all emitted 0.00% 0.000
2055 Polyurethanes(Concept Acrylic) N/A--assume all emitted 1,2,4-Trimethylbenzene 5.00% 0.050
2055 Polyurethanes(Concept Acrylic) N/A--assume all emitted 2-Butoxyethyl Acetate 5.00% 0.050
2055 Polyurethanes(Concept Acrylic) N/A--assume all emitted Ethylbenzene 5.00% 0.050
2055 Polyurethanes(Concept Acrylic) N/A--assume all emitted N-Butyl Alcohol 5.00% 0.050
2055 Polyurethanes(Concept Acrylic) N/A--assume all emitted Styrene 1.00% 0.010
2055 Polyurethanes(Concept Acrylic) N/A-assume all emitted Xylene(mixed isomers) 30.00% 0.300
2378 Corian Joint Adhesive N/A-No emission per MSDS Methyl Methacrylate 40.00% 0.400
2476 Hi Point 90 Clear(MEKP) N/A Dimethyl Phthalate 36.00% 0.014
2817 Gray Sand Primer(707-007X) N/A--assume all emitted Ethyl Acetate 2.00% 0.020
2817 Gray Sand Primer(707-007X) N/A--assume all emitted Methyl Ethyl Ketone 11.50% 0.115
2817 Gray Sand Primer(707-007X) N/A--assume all emitted Styrene 22.10% 0.221
3525 Clear Hi-Gloss Additive(904-001X) N/A-assume all emitted Methyl Ethyl Ketone 14.20% 0.142
3525 Clear Hi-Gloss Additive(904-001X) N/A--assume all emitted Styrene 33.60% 0.336
3699 Speed Patchaid(970X900) Manual Styrene 50.12% 0.090
3895 BPO/5 Paste Catalyst N/A No reportable HAPs 0.00% 0.000
3896 K-Lite 750 Mechanical Non-Atomized Styrene 40.00% 0.047
3M4200 3M Adhesive Sealant 4200 N/A--assume all emitted Methylenebis(phenylisocyanate) 0.30% 0.003
4324 Polycor White Gelcoat(948WJ201) Gelcoat Application Styrene 40.00% 0.220
435 Marine Sealant Fast Cure 5200 N/A No reportable HAPs 0.00% 0.000
4628 Color Blender(DBC500) N/A--assume all emitted Ethylbenzene 1.50% 0.015
4628 Color Blender(DBC500) N/A--assume all emitted N-Butyl Alcohol 10.00% 0.100
Page 3 of 6

Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical
4628 Color Blender(DBC500) N/A--assume all emitted Toluene 1.50% 0.015
4628 Color Blender(DBC500) N/A--assume all emitted Xylene(mixed isomers) 10.00% 0.100
4629 Clear Coats N/A--assume all emitted Ethylbenzene 5.00% 0.050
4629 Clear Coats N/A--assume all emitted Methyl Isobutyl Ketone 20.00% 0.200
4629 Clear Coats N/A--assume all emitted Styrene 1.00% 0.010
4629 Clear Coats N/A--assume all emitted Toluene 10.00% 0.100
4629 Clear Coats N/A--assume all emitted Xylene(mixed isomers) 40.00% 0.400
4630 Reducers N/A--assume all emitted Ethylbenzene 1.00% 0.010
4630 Reducers N/A--assume all emitted Methyl Ethyl Ketone 40.00% 0.400
4630 Reducers N/A--assume all emitted n-Hexane 5.00% 0.050
4630 Reducers N/A--assume all emitted Toluene 30.00% 0.300
4630 Reducers N/A--assume all emitted Xylene(mixed isomers) 10.00% 0.100
4631 Deltron 2000 Basecoats N/A--assume all emitted 1,2,4-Trimethylbenzene 5.00% 0.050
4631 Deltron 2000 Basecoats N/A--assume all emitted 2-Butoxyethyl Acetate 5.00% 0.050
4631 Deltron 2000 Basecoats N/A--assume all emitted Ethylbenzene 5.00% 0.050
4631 Deltron 2000 Basecoats N/A--assume all emitted Methyl Ethyl Ketone 20.00% 0.200
4631 Deltron 2000 Basecoats N/A--assume all emitted Methyl Isobutyl Ketone 20.00% 0.200
4631 Deltron 2000 Basecoats N/A--assume all emitted N-Butyl Alcohol 20.00% 0.200
4631 Deltron 2000 Basecoats N/A--assume all emitted Nickel Compounds 1.00% 0.010
4631 Deltron 2000 Basecoats N/A--assume all emitted Toluene 30.00% 0.300
4631 Deltron 2000 Basecoats N/A--assume all emitted Xylene(mixed isomers) 20.00% 0.200
4635a DCX Hardener N/A--assume all emitted Hexamethylene diisocyanate 1.00% 0.010
4635a DCX Hardener N/A--assume all emitted Isophorone Diisocyanate 1.00% 0.010
Page 4 of 6

Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical
4635b DFX11 Hardener N/A--assume all emitted Isophorone Diisocyanate 5.00% 0.050
4635c Primer Surface Catalyst(K201) N/A--assume all emitted Ethyl Acetate 10.00% 0.100
4635c Primer Surface Catalyst(K201) N/A--assume all emitted Hexamethylene diisocyanate 1.00% 0.010
4635c Primer Surface Catalyst(K201) N/A--assume all emitted Toluene 10.00% 0.100
4923 Laminex Fillet Manual Styrene 30.00% 0.038
519 Poly-Bond B39 Adhesive Mechanical Non-Atomized Styrene 24.40% 0.031
5212100 3M Super Duty 05955 N/A--assume all emitted 1,2,4-Trimethylbenzene 1.00% 0.010
5221010 Sikaflex 291,White N/A--assume all emitted Xylene(mixed isomers) 5.00% 0.050
5223038 Tite Bond II Adhesive(Wood Glue) N/A No reportable HAPs 0.00% 0.000
6040 Polycor Black Gelcoat(944B025) Gelcoat Application-MMA Methyl Methacrylate 4.63% 0.038
6040 Polycor Black Gelcoat(944B025) Gelcoat Application Styrene 34.11% 0.158
647A Polyurethane Foam Part A N/A No reportable HAPs 0.00% 0.000
6478 Polyurethane Foam Part 8 N/A No reportable HAPs 0.00% 0.000
9427 Kantstick Maxi Pull N/A No reportable HAPs 0.00% 0.000
945CJ007 Tool Thinner(945CJ007) Gelcoat Application-MMA Methyl Methacrylate 4.50% 0.038
945CJ007 Tool Thinner(945CJ007) Gelcoat Application Styrene 45.23% 0.282
953WJ301 Base White Gelcoat(953WJ301) Gelcoat Application-MMA Methyl Methacrylate 5.00% 0.038
953WJ301 Base White Gelcoat(953WJ301) Gelcoat Application Styrene 29.06% 0.129
963GK131 HAP33 Sea Foam Gelcoat(963GK131) Gelcoat Application-MMA Methyl Methacrylate 6.16% 0.049
963GK131 HAP33 Sea Foam Gelcoat(963GK131) Gelcoat Application Styrene 22.23% 0.163
9631A507 Seattle Grey Gelcoat(9631A507) Gelcoat Application-MMA Methyl Methacrylate 5.56% 0.045
9631A507 Seattle Grey Gelcoat(9631A507) Gelcoat Application Styrene 21.87% 0.097
9631-281 Carolina Blue Gelcoat(9631-281) Gelcoat Application-MMA Methyl Methacrylate 6.14% 0.045
Page 5 of 6

Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical
9631-281 Carolina Blue Gelcoat(9631-281) Gelcoat Application Styrene 21.99% 0.098
963LA855 Cobalt Gelcoat(963LA855) Gelcoat Application-MMA Methyl Methacrylate 5.83% 0.045
963LA855 Cobalt Gelcoat(963LA855) Gelcoat Application Styrene 22.58% 0.101
963LA862 Midnight Gelcoat(963LA862) Gelcoat Application-MMA Methyl Methacrylate 5.63% 0.045
963LA862 Midnight Gelcoat(963LA862) Gelcoat Application Styrene 22.34% 0.099
963RH333 Red Gelcoat(963RH333) Gelcoat Application-MMA Methyl Methacrylate 5.81% 0.045
963RH333 Red Gelcoat(963RH333) Gelcoat Application Styrene 22.95% 0.102
963YA596 Prowler Yellow Gelcoat(963YA596) Gelcoat Application-MMA Methyl Methacrylate 5.79% 0.045
963YA596 Prowler Yellow Gelcoat(963YA596) Gelcoat Application Styrene 22.43% 0.100
963YJ133 Fighting Yellow Gelcoat(963YJ133) Gelcoat Application-MMA Methyl Methacrylate 6.11% 0.053
963YJ133 Fighting Yellow Gelcoat(963YJ133) Gelcoat Application Styrene 21.83% 0.097
NONE1 3M Perfect It 05936 N/A No reportable HAPs 0.00% 0.000
NONE12 Filler Bondo Manual Styrene 20.00% 0.025
NONE13 Adhesive(3M Super 77) N/A--assume all emitted n-Hexane 1.00% 0.010
NONE15 Cleaner(HPP5) N/A No reportable HAPs 0.00% 0.000
NONE17 Armorflex Base White Gelcoat(953WJ301) Gelcoat Application-MMA Methyl Methacrylate 5.00% 0.038
NONE17 Armorflex Base White Gelcoat(953WJ301) Gelcoat Application Styrene 29.06% 0.129
NONE2 3M Imperial 06044 N/A No reportable HAPs 0.00% 0.000
NONE20 Aday Putty Mechanical Non-Atomized Styrene 30.00% 0.032
NONE21 Styrene Monomer N/A--assume all emitted Styrene 100.00% 1.000
NONE22 Aqua Blue 200 N/A No reportable HAPs 0.00% 0.000
NONE5 Wax Honey(P5401520) N/A No reportable HAPs 0.00% 0.000
Page 6 of 6

Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 200E
1037 Usage(gal): 1,550.5 VOC Content(wt%): 0.445 VOCs(ibs): 729.0
Resin(Corve 8153) Usage(lbs): 13,500.0 HAP Content(wt%): 0.445 HAP-,(its): 729.0
Density(!h!gal): 8.71
CAS No Chemical Weight°/, E-Factor HAP'TAP Lbs
100-42-5 Styrene 44.50% 0.054 729.0
1328 Usage(gal). 215.0 VOC Content(wt%): 0.300 VOCs(lbs): 63.3
Arjay 1201 Putty Usage(lbs): 1,972.4 HAP Content(wt%). 0.300 HAPs(Ibs): 63.3
Density(lb/gal): 9.17
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
100-42-5 Styrene 30.00% 0.032 63.3
13292 Usage(gal): 563.0 VOC Content(wt%): 0.940 VOCs(lbs): 479.8
IPS Adhesive Activator Usage(lbs): 5,103.9 HAP Content twt%): 0.800 HAPs(ibs): 408.3
Density(Ibigal): 9.07
CAS No Chemical Weight% E-Factor HAPlTAP Lbs
84-74-2 Dibutyl Phthalate 80.00% 0.080 408.3
13293 Usage(gal): 3,515.0 VOC Content(wt%.): 0.700 VOCS(11 s): 5,150.1
IPS Adhesive Usage (lbs): 28,142.5 HAP Content(wt%): 0.650 HAPs(Ibs): 3,743.0
Density(ib/gal): 8.01
CAS No Chemical Weight% E-Factor HAPiTAP Lbs
80-62-6 Methyl Methacrylate 65.00% 0.133 3,743.0
13512 Usage(gal): 10.0 VOC Content(wt%): 0.813 VOCS(11 s): 59.7
Cherry Wood Stain Usage(lbs): 73.4 HAP Content(wt%): 0.12E HAPs(lbs): 9.2
Density(lb!gal): 7.34
CAS No Chemical Weight% E-Factor HAPITAP Lbs
100-41-4 Ethylbenzene 0.60% 0.006 0.4
N/A Glycol Ethers 8.00% 0.080 5.9
1330-20-7 Xylene(mixed isomers 4.00% 0.040 2.9
13567 Usage(gal): 112,877.1 VOC Content(wt%): 0.350 VOCs(lbs): 41,680.3
Resin(VEX-201-958-F) Usage(lbs):,082.604.2 HAP Content(wt%): 0.350 HAPs(lbs): 41,680.3
Density(lb/gal): 9.59
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
100-42-5 Styrene 35.00% 0.039 41,680.3
13665 Usage(gal): 12,644.E VOC Content(wt°o): 0.277 VOCs(lbs): 21,728.2
Gelcoat(963WJ825) Usage(lbs): 141,838.6 HAP Content(wt-o): 0.277 HAPs(I s): 21,729.7
Density(lb/gal): 11.22
CAS No Chemical t4'eight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 8.46% 0.068 9,574.1
100-42-5 Styrene 19.26% 0.086 12,155.6
©Value Environmental 6/11/2007 Page 1 of 12

fountain Powerboats Washington
gt Plant:Usage and VOC&HAP Emissions Year Ending: December 200E
13706 Usage (gal) 232.8 VOC Content(wt4-,3): 0.115 b`OCs(lbs): 327.0
AWLGARD Interior White Paint Usage(Ibs) 2,851.3 HAP Content iwt%,}: 0.020 HAPs(lbs) 57.0
(WT8202) Density(Ibigal) 12.25
CAS No Chemical Weight% E-Factor HAPITAP Lbs
N/A Glycol Ethers 2.00% 0.020 57.0
13706-ACT
Usage(gal). 84.5 VOC Content(wt`%). 0.094 VOCs(lbs). 73.7
AWLGARD Converter(WT3201) Usage(lbs): 786.8 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(Ibiaal): 9.31
CAS No Chemical Weight% E-Factor HAPITAP Lbs
No reportable HAPs 0.00% 0.000 0.0
13794 Usage(gal): 1,513.4 VOC Content(wt',o): 0.775 VOCs(lbs): 7,094.1
3M Foam Fast 74 Cylinder Usage(Ibs): 9,150.7 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Psray Adhesive Density(Ib/gal): 6.05
CAS No Chemical Weight% E-Factor HAPITAP Lbs
No reportable HAPs 0.00% 0.000 0.0
13864 Usage(gal): 1,184.4 VOC Content(wt°%,I: 0.504 VOCs(lbs): 5,297.7
Adhesive Integra Usage(lbs): 10,515.2 HAP Content(wt%): 0.504 [HAPs(lbs): 5,297.E
Density(lb!gal): 8.88
CAS No Chemical Weight° E-Factor HAPITAP Lbs
84-74-2 Dibutyl Phthalate 0.36% 0.004 37.9
80-62-6 Methyl Methacrylate 50.02% 0.500 5,259.7
14195 ALT Usage(gat,: 51.6 VOC Content(vA%): 0.000 VOCs(lbs): 0.0
Elastopor P14840R Usage(lbs): 460.0 HAP Content(wt 10): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 8.92
CAS No Chemical Weight% E-Factor HAPJTAP Lbs
No reportable HAPs 0.00% 0.000 0.0
14321 Usage(gal): 28,387.0 VOC Content(w4%): 0.343 VOCs(ibs): 8,659.0
Core-Bond B71 Adhesive Usage(Ibs}: 224,910.0 HAP Content(wt;o): 0.343 HAPs Psi- 8,659.0
Density(lb/gal): 7.92
CAS No Chemical Weight"%° E-Factor HAPITAP Lbs
100-42-5 Styrene 34.30% 0.039 8,659.0
14441 Usage(gal): 1,732.3 VOC Content(wt%): 0.325 VOCs(lbs): 2,462.2
Black Barrier Gelcoat Usage(lbs): 16,542.2 HAP Content(vrt%): 0.318 HAPs(lbs): 2,339 1
967BJ244
Density(lb/gal): 9.55
CAS No Chemical Weiaht"%o E-Factor HAPITAP Lbs
100-42-5 Styrene 31.77% 0.141 2,339.1
©Value Environmental 6/11/2007 Page 2 of 12

Fountain Powerboats Washingfon Plant:Usage and VOC&HAP Emissions Year Ending: December 2006
1446 Jsage(gal): 30.2 VOC Content(��t .i: 0.394 VOCs(IbSI 55.6
Armorcoate Yellow Gelcoat Usage(Ibs): 290.0 HAP Content(wt%): 0.402 [-LHAPs(lbs): 57.9
(951 YA596)
Density(lblgal): 9.59
CAS No Chemical Weight ,o
g E-Factor HAPrTAP Lbs
80-62-6 Methyl Methacrylate 8.80% 0.060 17.4
100-42-5 Styrene 31.35% 0.140 40.5
14540 Usage(gal): 318.7 VOC Content(wt%): 0.301 VOCs(lbs): 537.5
Pitch Black Gelcoat(963BA025) Usage(ibs): 3,394.3 HAP Content(wt%): 0.301 HAPs(lbs): 537.7
Density(lb/gal): 10.65
CAS No Chemical Weight g E-Factor HAY;TAF Lbs
80-62-6 Methyl Methacrylate 6.29% 0.053 178.2
100-42-5 Styrene 23.80% 0.106 359.5
14617 Usage(gal): 26.2 VOC Content(vet%). 0.800 VOCs(lbs): 164.4
Trulube Pearl(PBC36) Usage(lbs): 205.5 HAP Content(wt%): 0.450I HAPs(lbs): 92.5
Density(lb;gal): 7.84
CAS No Chemical Weight% E-Factor HAPITAP Lbs
100-41-4 Ethylbenzene 10.00% 0.100 20.6
1330-20-7 Xylene(mixed isomers 35.00% 0.350 71.9
14618 Usage(gal): 8.7 VOC Content(wt%): 0.900 VOCs(lbs): 61.6
Passion Pearl Pearl(PBC65) Usage(lbs): 68.5 HAP Content(wt%): 0.400 HAPs(lbs): 27.4
Density(Ibigal): 7.84
CAS No Chemical Weight E-Factor HAP/TAP Lbs
100-41-4 Ethylbenzene 10.00% 0.100 6.8
1330-20-7 Xylene(mixed isomers 30.00% 0.300 20.5
14618a Usage(gal): 6.6 VOC Content fwt%): 0.800 VOCs(lbs): 41.5
Tangelo Pearl(PBC32) Usage(lbs): 51.9 HAP Content(wt'o): 0.450 HAPs(lbs): 23.3
Density(lb/gal): 7.84
CAS No Chemical Weight°% E-Factor HAP/TAP Lbs
100-41-4 Ethylbenzene 10.00% 0.100 5.2
1330-20-7 Xylene(mixed isomers 35.00% 0.350 18.2
1500007 Usage(gal): 3.9 VOC Content(wt%): 1.000 VOCs(lbs): 27.9
Dykem Blue 80600 Usage(lbs): 27.9 PHAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 7.09
CAS No Chemical Weight 44: E-Factor HAPiTAP Lbs
No reportable HAPs 0.00% 0.000 0.0
1500009 Usage(gal): 96.0 VOC Content(wt%): 0.356 VOCs(lbs): 37(.5
Gray Sand Primer(707-007X) Usage(Ibs): 1,040.8 HAP Content(wt%): 0.336 HAPs(Ibs): 349.7
Density(lb/gal): 10.84
CAS N;, Chem+ca; Lei ht°- E r a� a: _ Factor Hr.PT:,P Lam.
78-93-3 Methyl Ethyl Ketone 11.50% 0.115 119.7
100-42-5 Styrene 22.10% 0.221 230.0
©Value Environmental 6/11/2007 Page 3 of 12

Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2006
1500110
Usage(gal): 1,776.1 VOC Content(wt%): 0.360 VOCs(lbs): 228.7
Hi Point 90 Red(MEKP) Usage(lbs): 15,879.0 HAP Content(wt%): 0.360 HAPs(lbs): 228.7
Density(lb/gal): 8.94
CAS No Chemical Weight% E-Factor HAP'TAP Lh:
131-11-3 Dimethyl Phthalate 36.00% 0.014 228.7
1500230 Usage(gal): 74.3 VOC Content(wt%): 0.468 VOCs(lbs): 194.4
Black Tooling Gelcoat(945B201) Usage(Ibs): 675.0 HAP Content(wt%): 0.468 HAPs(lbs): 194.4
Density(lb/gal): 9.09
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 4.37% 0.038 25.3
100-42-5 Styrene 42.40% 0.251 169.1
1500230m Usage(gal): 69.3 VOC Content(wt%): 0.388 VOCs(lbs): 129.9
Black Tooling Gelcoat Usage(lbs): 630.0 HAP Content(wt%): 0.388 HAPs(lbs): 129.9
(965BJ115) Density(lb/gal): 9.09
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
67-56-1 Methyl Alcohol 0.72% 0.007 4.5
100-42-5 Styrene 38.07% 0.199 125.4
1500500 Usage(gat): 3,687.0 VOC Content(wt%): 0.316 VOCs(lbs): 748.3
Core-Bond B70 Adhesive Usage(lbs): 22,139.7 HAP Content(wt%): 0.316 HAPs(Ibs): 748.3
Density(Ib/oa!): 6.00
CAS No Chemical Weight% E-Factor HAPITAP Lbs
100-42-5 Styrene 31.60% 0.034 748.3
1500600 Usage(gal): 77.9 VOC Content(wt%o): 0.000 VOCs(lbs): 0.0
Foam(Elastopor P15390R) Usage(lbs): 706.0 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Density(lb/gal): 9.06
CAS No Chemical Weight%o E-Factor H 9 APiTAP Lbs
No reportable HAPs 0.00% 0.000 0.0
1500605 Usage(gal): 3,001.4 VOC Content(wt%): 0.000 VOCs(lbs): 0.0
Foam(Elastopor P1001U) Usage(lbs): 30,674.0 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Density(lb/gal): 10.22
CAS No Chemical Weight°4, E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
1575 Usage(gal): 3.0 VOC Content(wt%): 0.921 VOCs(lbs): 4.7
Polycor 8%Wax Solution Usage(lbs): 22.5 HAP Content(wt%): 0.920 HAPs(lbs): 4.7
(970C949) Density(Ib.'ga!): 7.50
CAS No Chemical Weight°;"� E-Factor HAPiTAP Lbs
100-42-5 Styrene 92.00% 0.210 4.7
©Value Environmental 6/11/2007 Page 4 of 12

Fountain Powerboats Washington Plant:Usage and VOC 8 HAP Emissions Year Ending: December 2006
1675 Usage(gal): 22.5 VOC Content(wt%): 0.638 VOCs(ibs): 119.7
3M Finesse It#05928 Usage(lbs): 187.7 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 8.34
CAS No Chemical Weight 1% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
1700 Usage(gal): 282.1 VOC Content(wt%). 0.574 VOCs(lbs): 269.E
Patchaid(970XJ037) Usage(lbs): 2,421.0 HAP Content(wt%): 0.575 HAPs(lbs): 269.7
Density(lb/gal): 8.68
CAS No Chemical Weight% E-Factor HAP?TAP Lbs
100-42-5 Styrene 57.45% 0.111 269.7
1700a Usage(gal): 48.9 VOC Content(wt%): 0.358 VOCs(lbs): 215.E
Sealer Usage (Ibs): 602.7 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 12.32
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000
0.0
2055 Usage(gal): 29.0 VOC Content(wt%): 0.690 VOCs(lbs): 180.E
Polyurethanes(Concept Acrylic) Usage(Ibs): 261.7 HAP Content(wt%): 0.360 HAPs(lbs): 94.2
Density(Ib/gal): 9.02
CAS No Chemical Weight% E-Factor HAPiTAP Lbs
100-41-4 Ethylbenzene 5.00% 0.050 13.1
100-42-5 Styrene 1.00% 0.010 2.6
1330-20-7 Xylene(mixed isomers 30.00% 0.300 78.5
2378 Usage(gal): 0.7 VOC Content(wt%): 0.400 VOCs(lbsy 2.8
Conan Joint Adhesive Usage(lbs): 7.0 HAP Content(vWlo: 0.400 HAPs(lbs): 2.8
Density(iblgal): 10.17
CAS No Chemical V."eight% E-Factor HAP(TAP Lbs
80-62-6 Methyl Methacrylate 40.00% 0.400 2.8
2476 Usage(gal): 469.3 VOC Content(wt°/,): 0.360 VOCs(lbs): 60.4
Hi Point 90 Clear(MEKP) Usage(lbs): 4,196.0 HAP Content(wt%): 0.360 HAPs(lbs): 60.4
Density(lb/gal): 8.94
CAS No Chemical Weight% E-Facto! HAPiTAP Lbs
131-11-3 Dimethyl Phthalate 36.00% 0.014 60.4
2817 Usage(gal): 231.81 VOC Content(wt/.): 0.356 VOCs(lbs): 894.5
Gray Sand Primer(707-007X) Usage{Ibs): 2.512.6 HAP Content(wt%): 0.336 HAPs(lbs): 844.2
Density(Iblgal): 10.84
CAS No Chemical Weight% E-Factor HAPfTAP Lbs
78-93-3 Methyl Ethyl Ketone 11.50% 0.115 289.0
100.42-5 Styrene 22.10% 0.221 555.3
©Value Environmental 6/11/2007 Page 5 of 12

is -r
Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions'' Year Ending. December 200E
3525 Usage(gal) 16.0 VOC Content('v;tO.): 0.478 VOCs (lbs): 65.1
Clear Hi-Gloss Additive(904- Usage(Ibs): 136.1 HAP Content(avt%): 0.478 HAP-,(lbs): 65.1
001X) Density(Ib/gal) 8.51
CAS No Chemical Weight 0". E-Far_tar HAPITAP Lbs
78-93-3 Methyl Ethyl Ketone 14.20% 0.142 19.3
100-42-5 Styrene 33.60% 0.336 45.7
3699 Usage(gal): 21.7 VOC Content(wt%): 0.501 VOCs(lbs): 17.3
Speed Patchaid(970X900) Usage(Ibs): 192.0 HAP Content(wt%): 0.501 HAPs(lbs): 17.3
Density(loyal): 8.83
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
100-42-5 Styrene 50.12% 0.090 17.3
3895 Usage(gal): 2,663.0 VOC Content(wt%): 0.200 VOCs(lbs): 5,152.E
BPO/5 Paste Catalyst Usage(lbs): 25,762.9 HAP Content(wt%): 0.000 HAPs(lbs): OA
Density(lb/gal): 9.67
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
3896 Usage(gal): 342.0 VOC Content(wt%): 0.400 VOCs(lbs}: 79.6
K-Lite 750 Usage(lbs): 1,711.4 HAP Content(wt%): 0.400 HAPs(lbs): 79.6
Density(lb/gal): 5.00
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
100-42-5 Styrene 40.00% 0.047 79.6
3M4200 Usage(gal): 84.6 VOC Content(wt%): 1.000 VOCs(Ibs): 832.E
3M Adhesive Sealant 4200 Usage(lbs): 832.E HAP Content(wt°,o): 0.003 HAPs(Ibs): 2.5
Density(ib/gal): 9.84
CAS No Chemical Weight% E-Factor HARi
TAP Lbs
101-68-8 Methylenebis(phenylis 0.30% 0.003 2.5
4324 Usage(gal): 2,160.0 VOC Content(wt%): 0.400 VOCs(Ibs): 4,974.3
Polycor White Gelcoat Usage(Ibs): 22,662.0 HAP Content(wt%): 0.400 HAPs fibs): 4,974.3
(948WJ201) Density(lb/gal): 10.49
CAS No Chemical Weight% E-Factor HAPJAP Lbs
100-42-5 Styrene 40.00% 0.220 4,974.3
435 Usage(gal): 133.1 VOC Content(wt%): 0.020 VOCs(lbs): 29.5
Marine Sealant Fast Cure 5200 Usage(lbs}: 1,476.E HAP Content(wt%): 0.000 HAPs Obs): 0.0
Density(lb/gal): 11.09
CAS No Chemical Weiaht% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
©Value Environmental 6/11/2007 Page 6 of 12

Fountain Powerboats Washington Plant:Usage and VOC 8 HAP Emissions Year Ending. December 2006
4628 Usage(gal,: 38.2 VOC Cotiierit(wt'ii?: 1.000 VOCs(Itb) 296.4
Color Blender(DBC500) Usage(Ibs) 296.4 HAP Content(wfj,,,,): 0.130 HAPs(ibs) 38.5
Density(ib!g; 7.76
CAS N% Chemical 'Welg;It S' E-Factor HA:,-,AP L!.s
100-41-4 Ethylbenzene 1.50% 0.015 4.4
108-88-3 Toluene
1.50/0 0.015 4.4
1330-20-7 Xylene(mixed isomers 10.00% 0.100 29.6
4629 Usage(gal): 161.9 VOC Content(wt%): 0.508 VOCs(Ibs): 653.6
Clear Coats Usage(lbs): 1,287.1 HAP Content(wtl, ): 0.760 HAPs(lbs): 978.2
Density(Ib/gal): 7.95
CAS No Chemical Weigh' o E-Factor HAP/TAP Lbs
100-41-4 Ethylbenzene 5.00% 0.050 64A
108-10-1 Methyl Isobutyl Ketone 20.00% 0.200 257.4
100-42-5 Styrene 1.00% 0.010 12.9
108-88-3 Toluene 10.00% 0.100 128.7
1330-20-7 Xylene(mixed isomers 40.00% 0.400 514.8
4630 Usage(gal): 327.2 VOC Content(wt°b): 1.000 VOCs(lbs): 2,262.4
Reducers Usage(lbs): 2,262.4 HAP Content(wt%): 0.860 HAPs(lbs): 1,945.7
Density(Ib/gal): 6.91
CAS No Chemical Weight% E-Factor HAP TAP Lbs
100-41-4 Ethylbenzene 1.00% 0.010 22.6
78-93-3 Methyl Ethyl Ketone 40.00% 0.400 905.0
110-54-3 n-Hexane 5.00% 0.050 113.1
108-88-3 Toluene 30.00% 0.300 678.7
1330-20-7 Xylene(mixed isomers 10.00% 0.100 226.2
4631 Usage(gal): 164.9 VOC Content(vA%): 0.860 VOCs(lbs): 1,206.3
Deltron 2000 Basecoats Usage tlbs): 1,402.7 HAP Content(wt%). 0.960 HAPs(Ibs}; 1,346.6
Density(lb/gal): 8.51
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
100-41-4 Ethylbenzene 5.00% 0.050 70.1
78-93-3 Methyl Ethyl Ketone 20.00% 0.200 280.5
108-10-1 Methyl Isobutyl Ketone 20,00% 0.200 280.5
N/A Nickel Compounds 1.00% 0.010 14.0
108-88-3 Toluene 30.00% 0.300 420.8
1330-20-7 Xylene(mixed isomers 20.00% 0.200 280.5
4635a Usage(gal): 14.7 VOC Content!wt%): 0.161 VOCs(Ibs): 21.2
DCX Hardener Usage(lbs): 131.8 HAP Content,'v"M : 0.010 HAPs(lbs.: 1.3
Density(Iblgal): 8.96
CAS P<o Chemical Weigh.?j� E-Factor HAPITAP Lbs
822-06-0 Hexamethylene diisoc 1.00% 0.010 1.3
©Value Environmental 6/11/2007 Page 7 of 12

Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2006
4635c Usage(gal): 13.4 VOC Content(wt°::i 0.583 VOCs(bs): 63.4
Primer Surface Catalyst(K201) Usage(lbs): 108.9 HAP Content(wt%): 0.110 HAPs(lbs): 12.0
Density(Iblgal): 8.15
-,s N Chemical Weight% E-Factor HAP/TAP Lbs
822-06-0 Hexamethylene diisoe 1.00% 0.010 1.1
108-88-3 Toluene 10.00% 0.100 10.9
4923 Usage(gal): 161.0 VOC Content(wt%): 0.300 VOCs(lbs): 50.8
Laminex Fillet Usage(Ibs;: 1,342.7 HAP Content(wt%): 0.300 HAPs(Ibs): 50.8
Density(lb/gal): 8.34
CAS No Chemical Weight% E-Factor HAPlTAP Lbs
100-42-5 Styrene 30.00% 0.038 50.8
519 Usage(gal): 2,421.0 VOC Content(wt%): 0244 VOCs(lbs): 681.9
Poly-Bond B39 Adhesive FUsage(lbs): 22,210.3 HAP Content(wt%): 0244 HAPs(Ibs): 681.9
Density(Ib/gal): 9.17
CAS Nu Chemical Weight% E-Factor HAP/TAP Lbs
100-42-5 Styrene 24.40% 0.031 681.9
5221010 Usage(gal): 6.4 VOC Content(wt%): 0.082 VOCs(lbs): 5.2
Sikaflex 291,White Usage(lbs): 63.6 HAP Content(wt%): 0.050 HAPs(lbs): 3.2
Density(lb/gal): 9.92
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
1330-20-7 Xylene(mixed isomers 5.00% 0.050 3.2
5223038 Usage(ga!): 17.0 VOC Content(wt%): 0.012 VOCs(lbs): 1.9
Tde Bond II Adhesive(Wood Usage(Ibs): 154.7 HAP Content(wt%): 0.0001 HAPs(lbs): 0.0
Glue) Density(Ibigal): 9.10
CAS No
Chemical Weight°!° E-Factor HAPTAP Lbs
No reportable HAPs 0.00% 0.000 0.0
6040 Usage(gal): 565.9 VOC Content(wt%): 0.387 VOCs(lbs): 1,117.2
Polycor Black Gelcoat(944B025) Usage(lbs): 5,730.0 HAP Content(wt%): 0.387 r HAPs(lbs): 1.117.3
Density(lb/gal): 10.12
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 4.63% 0.038 214.9
100-42-5 Styrene 34.11% 0.158 902.5
647A Usage(gal): 94.1 VOC Content(wt%): 0.000 VOCs(lbs): 0.0
Polyurethane Foam Part A Usage(lbs): 972.7 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 10.34
CAS No Chemical Weight% E-Factor HAP TAD Lbs
No reportable HAPs 0.00% 0.000 0.0
©Value Environmental 6/11/2007 Page 8 of 12

Fountain Pa hindton Plant•U a and VOC&HAP Emissions :" Year Erid ' 43
g mg Decinnber 200E
647E Usage(gal). 100.1 VOC Content(wtN: 0.000 VOCs(Ihs): 0.0
Polyurethane Foam Part B Usage(4bs}: 1,001.E HAP Content(wf%): 0.000 HAPs(Ibs): 0.0
Density(Iblgai): 10.01
CAS No Chemical WYeight% E-Facicr HAPITAP Lbs
No reportable HAPs 0.00% 0.000 0.0
9427 Usage(gal): 21.0 VOC Content(wt°%): 1.000 VOCs(ibs): 128.7
Kantstick Maxi Pull Usage(ibs): 128.7 HAP Content(wt°/o): 0.000 HAPs(,bs : 0.0
Density(lb/gal): 6.13
CAS No Chemical Weight%.
g� E-, actor HAPITAP Lbs
No reportable HAPs 0.00% 0.000 0.0
945CJ007 Usage(gal): 0.0 VOC Content(vdi''.c): 0.497 VOCs(lbs): 0.0
Tool Thinner(945CJ007) Usage fibs): 0.0 HAP Content(wt%): 0.497 HAPs(lbs): 0.0
Density(lb?gal): 8.88
CAS No Chemical Weight% E-Factor HAPITAP Lbs
80-62-6 Methyl Methacrylate 4.50% 0.038 0.0
100-42-5 Styrene 45.23% 0.282 0.0
953WJ301 Usage(gal): 4.6 VOC Content(wt%): 0.341 VOCs(lbs): 8.3
Base White Gelcoat(953WJ301) Usage(lbs): 50.0 FIHAP Content(wt%): 0.341 HAPs(lbs): 8.3
Density(Iblual): 10.78
CAS No Chemical Weight% E-Factor HAPITAP Lbs
80-62-6 Methyl Methacrylate 5.00% 0.038 1.9
100-42-5 Styrene 29.06% 0.129 6.5
963GKI31 Usage fgai): 13.6 VOC Content(tvt%): 0284 VOCs(lbs): 31.8
HAP33 Sea Foam Gelcoat Usage(lbs): 150.0 HAP Content(wt%): 0.284 HAPs(lbs): 31.8
(963GK131)
Density(Ib,gai): 11.04
CAS No Chemical Weight% E-Factor HAPITAP Lbs
80-62-6 Methyl Methacrylate 6.16% 0.049 7.3
100-42-5 Styrene 22.23% 0.163 24.4
963IA507 Usage(gal): 4.1 VOC Content(wt%): 0.274 VOCs(lbs): 6.5
Seattle Grey Gelcoat(9631A507) Usage(lbs): 46.0 HAP Content(wt%): 0.274 HAPs Qbs} 6.5
Density(Iblgal): 11.19
GAS No Chemical Weight`,/. E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 5.56% 0.045 2.1
100-42-5 Styrene 21.87% 0.097 4.5
9631_281 Usage(gal): 56.0 VOC Content(wt%): 0.281 VOCs(lbs): 88.6
Carolina Blue Gelcoat(963L281) Usage(Ibs): 620.0 HAP Content(wt%): 0.281 HAPs(Ibs): 88.E
Density(lb/gal): 11.08
CAS No Chemical Weigh;`%o E-Factor HAPITAP Lbs
80-62-6 Methyl Methacrylate 6.14% 0.045 27.9
100-42-5 Styrene 21.99% 0.098 60.7
©Value Environmental 6/1 1 12 0 0 7 Page 9 of 12

fountain Powerboats Washin on Plant:Usa a and VOC 8 HAP Emissions
Year End� g � ing. 'December 2006
963LA855 Usage(gal:: 499.1 VOC Content(Wt` r 0.284 VOCs(lbsl 775.9
Cobalt Gelcoat(963LA855) Usage(lbs,): 5.331.8 HAP Content(wt"/',): 0284 HAPs(lbs): 775.8
Density(!b!gal): 10.68
CAS No Chemical Weight`i:- E-Factor HAPITAP Lbs
80-62-6 Methyl Methacrylate 5.83% 0.045 239.9
100-42-5 Styrene 22.58% 0.101 535.8
963LA862 Usage(gan) 160.9 VOC Content(wt%'Il 0.280 VOCs(lbs): 246.0
Midnight Gelcoat(963LA862) Usage(Ibs). 1,704.0 HAP Content(vAOX.): 0.280 HAPs(lbs): 246.1
Density(lb/gal): 10.59
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 5.63% 0.045 76.7
100-42-5 Styrene 22.34% 0.099 169.4
963RH333 Usage(gal): 56.5 VOC Content(wt°o): 0.288 VOCs(Ibs): 88.4
Red Gelcoat(963RH333) Usage(lbs): 601.0 HAP Content(wt%): 0288 HAPs(lbs): 88.4
Density(lb/gal): 10.63
CAS No Chemical Weight%. E-Factor HAPITAP Lbs
80-62-6 Methyl Methacrylate 5.81% 0.045 27.0
100-42-5 Styrene 22.95% 0.102 61.4
963YA596 Usage(gall: 180.4 VOC Content(wt%): 0.282 VOCs(lbs): 281.7
Prowler Yellow Gelcoat Usage(lbs): 1,945.0 HAP Content(v.t%): 0.282 HAPs(lbs): 281.6
(963YA596) Density(ib?gal): 10.78
CAS No Chemical Weight%. E-Factor HAPITAP Lbs
80-62-6 Methyl Methacrylate 5.79% 0.045 87.5
100-42-5 Styrene 22.43% 0.100 194.1
963YJ133 Usage(gal): 90.9 VOC Content(wt%"): 0.279 VOCs(lbs): 150.7
Fighting Yellow Gelcoat Usage(lbs): 1,007.0 HAP Content(wt%): 0279 HAPs(Ibs): 150.7
(963YJ133) Density(lb/gal): 11.08
CAS No Chemical Weight% E-Factor HAPITAP Lbs
80-62-6 Methyl Methacrylate 6.11% 0.053 52.9
100-42-5 Styrene 21.83% 0.097 97.8
NONE1 Usage(gal): 53.8 VOC Content(wt%): 0.433 VOCs(lbs): 197.8
°-"l
3M Perfect It 05936 Usage Obs): 4572 HAP Content(wt : 0.000 HAP.(Ibs): 0.0
Density(lb/gal): 8.51
CAS No Chemical Weight 4' E-Factor HAPITAP Lbs
No reportable HAPs 0.00% 0.000 0.0
NONE12 Usage(gal): 49.0 VOC Content(wt`«): 0.200 1 VOCs(lbs): 11.8
Filler Bondo Usage(lbs): 470.0 HAP Content(wt%): 0.200 HAPs ilbs): 11.8
Density(Ib%gal): 9.59
CAS N^ Chemical, Weight",; E-Factor HAPITAP Lbs
100-42-5 Styrene 20.00% 0.025 11.8
©Value Environmental 6/11/2007 Page 10 of 12

Fountain Powerboats Washington.Plant:Usage and V668 HAP Emissions Year Ending December 2006
NONE13 Usage(gal): 26.1 VOC Content(wt%): 0.750 VOCs(lbs): 113.8
Adhesive(3M Super 77) Usage(Ibs): 151.8 HAP Content(wt%): 0.010 HAPs(lbs): 1.5
Density(lb/gal): 5.81
CAS No Chemical Weight% E-Factor HAPiTAP Lbs
110-54-3 n-Hexane 1.00% 0.010 1.5
NONE15 Usage(gal): 1,980.0 VOC Content(wt%): 0.1751 VOCs(lbs): 2,947.6
Cleaner(HPP5) Usage(lbs): 16,843.5 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 8.51
CAS No Chemical Weight°%. E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
NONE17 Usage(gal): 53.0 VOC Content(wt%): 0.341 VOCs(lbs): 95.0
Armorflex Base White Gelcoat Usage(lbs): 569.8 HAP Content(wt%): 0.341 HAPs(lbs): 95.0
(953WJ301) Density(lb/gal): 10.75
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 5.00% 0.038 21.4
100-42-5 Styrene 29.06% 0.129 73.7
NONE2 Usage(gal): 347.5 VOC Content(wt%): 0.660 VOCs(lbs): 2,411.7
3M Imperial 06044 Usage(lbs): 3,651.7 HAP Content(wt°/a): 0.0001 HAPs(lbs): 0.0
Density(lb/gal): 10.51
CAS No Chemical Weight% E-Factor HAP+T.AP Lbs
No reportable HAPs 0.00% 0.000 0.0
NONE20 Usage(gal): 60.0 VOC Content(wt%): 0.300 VOCs(Ibs): 17.7
Arjay Putty Usage(Ibs): 550.4 HAP Content(wt%): 0.300 HAPs(lbs): 17.7
Density(Ib/gal): 9.17
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
100-42-5 Styrene 30.00% 0.032 17.7
NONE21 Usage(gal): 5.1 VOC Content(wt%): 1.000 VOCs(lbs): 38.0
Styrene Monomer Usage(lbs): 38.0 HAP Content(wt%): 1.000 HAPs(Ibs): 38.0
Density(Ib/gal): 7.51
CAS No Chemical Weight /
E-Factor HAP(TAP Lbs
100-42-5 Styrene 100.00% 1.000 38.0
NONE22 Usage(gal): 36.0 VOC Content(wt%): 0.350 VOCs(lbs): 105.1
Aqua Blue 200 Usage(lbs): 300 22 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 8.34
CAS No Chemical Weight% E-Factor HAPJAP Lbs
No reportable HAPs 0.00% 0.000 0.0
©Value Environmental 6/11/2007 Page 11 of 12

Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2006
NONES Usaga (gal): 164.0 VOC Content'v�t`;;:i: 0.700 VOCs i (I„s). 804.5
Wax Honey(P5401520) Usage pigs) 1.148.9 HAP Content(wt°/,): 0.000 HRPs(ibs): 0.0
Density(lb%gal): 7.01
CAS No Chemical Weight 06 E-Far_tor HAPI-AP :-In
No reportable HAPs 0.00% 0.000 0.0
Month(lbs) Month(tons)
VOCs: 124,173 62.09
HAPs: 101,537 50.77
©Value Environmental 6/11/2007 Page 12 of 12

\ r
Foun>�a n Powerboats ashingtonJPlarVt"usage.&Emissions.
CAS No chemical Emissions (Ibs) Emissions (*.!3nsl
HAP? 0
84-74-2 Dibutyl Phthalate 446 0.22
131-11-3 Dimethyl Phthalate 289 0.14
100-41-4 Ethylbenzene 208 0.10
N/A Glycol Ethers 63 0.03
822-06-0 Hexamethylene diisocyanate 2 0.00
67-56-1 Methyl Alcohol 5 0.00
108-10-1 Methyl Isobutyl Ketone 538 0.27
80-62-6 Methyl Methacrylate 19,560 9.78
101-68-8 Methylenebis(phenylisocyanate 2 0.00
110-54-3 n-Hexane 115 0.06
N/A Nickel Compounds 14 0.01
No reportable HAPs 0 0.00
100-42-5 Styrene 76,192 38.10
108-88-3 Toluene 1,244 0.62
1330-20-7 Xylene(mixed isomers) 1,247 0.62
Subtotal 99,924 49.96
HAP?
141-78-6 Ethyl Acetate 82 0.04
78-93-3 Methyl Ethyl Ketone 1,613 0.81
Subtotal 1,695 0.85
Total 101,619 50.81
©Value Environmental 6/12/2007 Page 1 of 1