AQ_F_0700122_20050808_EI_Cmb-EI-File

e
2004 Emissions Inventory Review/Data Tracking Form
Facility Name: r 0 p
County/Premise Number: of 0 V t 2l Assigned to: Confidential?
Initial Review/Data Entry
❑ If confidential information received,it has been properly labeled and stored. Sanitized copies have been
received for public use.
❑ Two copies of inventory were received and forms were signed by responsible official.
Inventory Review/Database Entry
9,` Forms appear to be complete Calculations and control efficiencies
supporting emissions appear correct
Er Calculations appear to add up ok ❑" All permitted sources and required
significant activities are quantified
Q" All compliance issues resulting from review are being addressed. (i.e.toxics,emission limitations
exceeded,unpermitted sources)
8 All volatile HAPS/TAPS are included in the VOC total
C;-- All appropriate ID numbers are entered where they should be(Source,Stack)
la' All changes made in the review by AQ staff are in both copies of the inventory before sending to
Central Office.
Comments:
Signature: 3 `
Date Billing Contact & General Data updated in FEES database
J�rP1 I'o
Date Emissions Data loaded into IMPAQ database P t 9 0
Remember: Confidential copies must be properly handled!
(SAAIR\ ADN fN\2004 Emission Inventories\WARO inventory review form.doc)

Inventory Certification Form(Title V)
Facility Name: Fountain Power Boats Facility ID : 0700122
1653 Whichards Beach Road SR 1166 Permit: 06175
Washington,NC 27889 County : Beaufort
DAQ Region :WARO
North Carolina Department of Environment and Natural Resources
Division of Air Quality
Air Pollutant Point Source Emissions Inventory— Calendar Year 2004
These forms must be completed and returned even if the facility did not operate or emissions were zero
The legally defined "Responsible Official" of record for your facility is Jack Clark
This person or one that meets the definition below must sign this certification form.
The official submitting the information must certify that he/she complies with the requirements as specified in Title 15A
NCAC 2Q.0520(b)which references and follows the federal definition.40 CFR Part 70.2 defines a responsible as meaning one
of the following:
1. For a corporation: a president,secretary,treasurer, or vice—president of the corporation in charge of a principal
business function,or any other person who performs similar policy or decision making fimctions for the overall
operation of one or more manufacturing,production,or operating facilities applying for a or subject to a permit and
either
i.the facilities employ more than 250 persons or have gross annual sales or expenditures exceeding$25
million(in second quarter 1980 dollars); or
ii.the delegation of authority to such representatives is approved in advance by the permitting authority;
2. For partnership or sole propietorship; a general partner or the proprietor,respectively;
3. for a muncipality, state,federal,or other public agency includes the chief executive officer having responsibility for the
overall operations of a principal geographic unit of the agency(e.g., a Regional Administrator of EPA).
CERTIFICATIONSTATEMENT:
(Important: Legally Responsible Offi ial read and sign after all submissions are fina
certify that I am the responsible official for this facility,as described above,and hereby certify that the information contained
in this air emissions report,including attached calculations and documentation, is true,accurate and complete. (Subject to legal
enalities of up to$10,000 per occurrence and possible imprisonment as outlined in G.S.§143-215.3(a)(2))
Responsible Official's Signature Below use blue ink): Date Signed:
Printed Nam : Jaek-C4ark a Vic)
Si ature:
This form applies to Title V facilities. If this facility is not classified as Title V,please telephone your regional office Emission
Inventory contact at once for proper forms.
hkrclison@-coa1\�-CLInP0WQ-rba �+►'1
Email address of Responsible Official: jel 6 2J05
Information on this Form cannot be held confidential
DAQ W ARB
1

Fountain Powerboats
2004 Emission Inventory Calculations
VOC,HAP and PM Emission Calculations
This document describes actual Volatile Organic Compound(VOC),Particulate Matter(PM)and
Hazardous Air Pollutant(HAP)emissions from the facility. Emission calculations utilize the
Unified Emission Factors F)for open molding of composites dated July 23,2001. An
attached table lists the basis for each emission factor(E-factor)utilized in the emissions
calculations. A copy of the July 23, 2001 UEF table is also included with this letter.
The gelcoat spray guns are atomized. The styrene emission factor used for gelcoats is from the
gelcoat application row of the UEF table. The Methyl Methacrylate(MMA)emission factor used
for gelcoats is based on the MMA gelcoat application row of the UEF table. The resin guns are
non-atomized. The emission factor for lamination resins is taken from the mechanical non-
atomized row of the UEF table.
Small quantities of highly reactive liquid organic perioxide solutions(e.g.,Hi Point 90)are used
by the reinforced plastics industry to initiate the polymerization reaction in the resin or gelcoat
material. Emission estimates in this permit application are based on the composite Manufacturer
Associations' study, "Emission Factors for Liquid Organic Peroxide Catalysts used in the Open
Molding of Composites." The emission factor for Dimethyl Phthalate(DMP)or other utilized
organic is 0.04%of the available DMP by weight or 0.0144(0.04 x 36%).
Usage of and thus emissions from other raw materials(e.g.,mold cleaners and sealers,etc.)at the
Washington plant are smaller in nature. Emissions from these other material usages and/or
chemicals utilize a similar methodology or conservatively assume all of the chemical is emitted
(e.g., solvents in paints used).
Particulate emissions from painting are calculated assuming a 1%total weight loss with 50
percent of those emissions PM,o and 25 percent of those emissions PM2.5 as a conservative
estimate with no controls.
Particulate emissions from paint usage:
9,9001bs paint bought plant-wide
assume 1%loss as particulate emissions, 50%of that is PM,o and 25%is PM2.5
9,8001bs x 0.01 =98 pounds PM/year=0.049 tons PM/year
98 lbs PM x 0.5 =49 pounds PM10/year=0.025 tons PMro/year
98 lbs PM x 0.25 =24.5 pounds PM2.5/year=0.013 tons PM2.5/year
Particulate emissions from hull and deck grinding:
1,300,000 lbs resin and gelcoat bought plant-wide
assume 1%loss with 25%of that emitted as particulate emissions, 50%of that is PM,o and 25%
is PM2.5.
1,300,000 lbs x 0.01 x 0.25=3,250 pounds PM/year= 1.63 tons PM/year
3,250 lbs PM x 0.5 = 1,625 pounds PM,o/year=0.81 tons PM10/year
3,250 lbs PM x 0.25 =813 pounds PM2.5/year=0.41 tons PM2.5/year

Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical (%) (%)
1037 Resin(Corve 8153) Mechanical Non-Atomized Styrene 44.50% 0.054
1328 Arjay 1201 Putty Mechanical Non-Atomized Styrene 30.00% 0.032
13292 IPS Adhesive Activator N/A--10%emitted per MSDS Benzoyl Peroxide 14.00% 0.014
13292 IPS Adhesive Activator N/A--10%emitted per MSDS Dibutyl Phthalate 80.00% 0.080
13293 IPS Adhesive N/A--assume all emitted Methacrylic Acid 5.00% 0.050
13293 IPS Adhesive Manual Methyl Methacrylate 65.00% 0.133
13375 Pro-Set 125 Resin N/A No reportable HAPs 0.00% 0.000
13376 Pro-Set 229 Resin Hardener N/A No reportable HAPs 0.00% 0.000
1343 Armorflex Fountain White Gel(953WJ728) Gelcoat Application-MMA Methyl Methacrylate 5.00% 0.038
1343 Armorflex Fountain White Gel(953WJ728) Gelcoat Application Styrene 28.85% 0.128
13439 Imron Accelrator N/A No reportable HAPs 0.00% 0.000
13512 Cherry Wood Stain N/A--assume all emitted Ethylbenzene 0.60% 0.006
13512 Cherry Wood Stain N/A--assume all emitted Glycol Ethers 8.00% 0.080
13512 Cherry Wood Stain N/A--assume all emitted Xylene(mixed isomers) 4.00% 0.040
13567 Resin(VEX-201-958-F) Mechanical Atomized Styrene 35.00% 0.070
13570 b Sea Grip 5000 No reportable HAPs 0.00% 0.000
13665 Gelcoat(963WJ825) Gelcoat Application-MMA Methyl Methacrylate 8.46% 0.068
13665 Gelcoat(963WJ825) Gelcoat Application Styrene 19.26% 0.086
13706 AWLGARD Interior White Paint(WT8202) N/A--assume all emitted Glycol Ethers 2.00% 0.020
13706-ACT AWLGARD Converter(WT3201) No reportable HAPs 0.00% 0.000
13794 3M Foam Fast 74 Cylinder Psray Adhesive No reportable HAPs 0.00% 0.000
13864 Adhesive Integra N/A--assume all emitted Dibutyl Phthalate 0.36% 0.004
Page I of 8

Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical (%) (%)
13864 Adhesive Integra N/A--assume all emitted Methyl Methacrylate 50.02% 0.500
1446 Armorcoate Yellow Gelcoat(951YA596) Gelcoat Application-MMA Methyl Methacrylate 8.80% 0.060
1446 Armorcoate Yellow Gelcoat(951 YA596) Gelcoat Application Styrene 31.35% 0.140
1447 Prowler Yellow Gelcoat(948YA596) Gelcoat Application-MMA Methyl Methacrylate 4.27% 0.038
1447 Prowler Yellow Gelcoat(948YA596) Gelcoat Application Styrene 30.77% 0.137
1500007 Dykem Blue 80600 N/A No reportable HAPs 0.00% 0.000
1500009 Gray Sand Primer(707-007X) N/A--assume all emitted Ethyl Acetate 2.00% 0.020
1500009 Gray Sand Primer(707-007X) N/A--assume all emitted Methyl Ethyl Ketone 11.50% 0.115
1500009 Gray Sand Primer(707-007X) N/A--assume all emitted Styrene 22.10% 0.221
1500110 Hi Point 90 Red(MEKP) N/A Dimethyl Phthalate 36.00% 0.014
1500230 Black Tooling Gelcoat(9456201) Gelcoat Application-MMA Methyl Methacrylate 4.37% 0.038
1500230 Black Tooling Gelcoat(9456201) Gelcoat Application Styrene 42.40% 0.251
1500230m Black Tooling Gelcoat(965BJ115) N/A--assume all emitted Methyl Alcohol 0.72% 0.007
1500230m Black Tooling Gelcoat(96513J115) Gelcoat Application Styrene 38.07% 0.199
1500500 Core-Bond B70 Adhesive Mechanical Non-Atomized Styrene 31.60% 0.034
1500600 Foam(Elastopor P15390R) N/A No reportable HAPs 0.00% 0.000
1500605 Foam(Elastopor P1001U) N/A No reportable HAPs 0.00% 0.000
1575 Polycor 8%Wax Solution(970C949) Manual Styrene 92.00% 0.210
1675 3M Finesse It#05928 N/A No reportable HAPs 0.00% 0.000
1700 Patchaid(970XJ037) Manual Styrene 57.45% 0.111
1700a Sealer N/A No reportable HAPs 0.00% 0.000
2055 Polyurethanes(Concept Acrylic) N/A--assume all emitted 0.00% 0.000
2055 Polyurethanes(Concept Acrylic) N/A--assume all emitted 1,2,4-Tri methyl benzene 5.00% 0.050
Page 2 of 8
I
i

Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical (%) (%)
2055 Polyurethanes(Concept Acrylic) N/A--assume all emitted 2-Butoxyethyl Acetate 5.00% 0.050
2055 Polyurethanes(Concept Acrylic) N/A-assume all emitted Ethylbenzene 5.00% 0.050
2055 Polyurethanes(Concept Acrylic) N/A assume all emitted N-Butyl Alcohol 5.00% 0.050
2055 Polyurethanes(Concept Acrylic) N/A assume all emitted Styrene 1.00% 0.010
2055 Polyurethanes(Concept Acrylic) N/A--assume all emitted Xylene(mixed isomers) 30.00% 0.300
2378 Corian Joint Adhesive N/A-No emission per MSDS Methyl Methacrylate 40.00% 0.400
2378a Orange VE Tooling(1908-045) N/A--assume all emitted Styrene 37.30% 0.373
2379 Corian Joint Adhesive N/A No reportable HAPs 0.00% 0.000
2476 Hi Point 90 Clear(MEKP) N/A Dimethyl Phthalate 36.00% 0.014
2773 Slocum Adhesive(M-341) N/A No reportable HAPs 0.00% 0.000
2817 Gray Sand Primer(707-007X) N/A--assume all emitted Ethyl Acetate 2.00% 0.020
2817 Gray Sand Primer(707-007X) N/A--assume all emitted Methyl Ethyl Ketone 11.50% 0.115
2817 Gray Sand Primer(707-007X) N/A--assume all emitted Styrene 22.10% 0.221
2854 High Solids Imron N/A--assume all emitted Ethyl Acetate 2.80% 0.028
2854 High Solids Imron N/A--assume all emitted Ethylbenzene 0.30% 0.003
2854 High Solids Imron N/A--assume all emitted Glycol Ethers 7.90% 0.079
2854 High Solids Imron N/A--assume all emitted Toluene 1.50% 0.015
2854 High Solids Imron N/A--assume all emitted Xylene(mixed isomers) 2.00% 0.020
2855 Imron Activator N/A--assume all emitted Ethylbenzene 0.30% 0.003
2855 Imron Activator N/A--assume all emitted Glycol Ethers 2.50% 0.025
2855 Imron Activator N/A--assume all emitted Methyl Ethyl Ketone 2.90% 0.029
2855 Imron Activator N/A--assume all emitted Toluene 4.80% 0.048
2855 Imron Activator N/A--assume all emitted Xylene(mixed isomers) 1.00% 0.010
Page 3 of 8

Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical (%) (%)
3035 Ampreg 22 Laminating Resin No reportable HAPs 0.00% 0.000
3525 Clear Hi-Gloss Additive(904-001X) N/A--assume all emitted Methyl Ethyl Ketone 14.20% 0.142
3525 Clear Hi-Gloss Additive(904-001X) N/A--assume all emitted Styrene 33.60% 0.336
3699 Speed Patchaid(970X900) Manual Styrene 50.12% 0.090
3895 BPO/5 Paste Catalyst N/A No reportable HAPs 0.00% 0.000
3896 K-Lite 750 Mechanical Non-Atomized Styrene 40.00% 0.047
4324 Polycor White Gelcoat(948WJ201) Gelcoat Application Styrene 40.00% 0.220
435 Marine Sealant Fast Cure 5200 N/A No reportable HAPs 0.00% 0.000
4629 Clear Coats N/A--assume all emitted Ethylbenzene 5.00% 0.050
4629 Clear Coats N/A--assume all emitted Methyl Isobutyl Ketone 20.00% 0.200
4629 Clear Coats N/A--assume all emitted Styrene 1.00% 0.010
4629 Clear Coats N/A--assume all emitted Toluene 10.00% 0.100
4629 Clear Coats N/A--assume all emitted Xylene(mixed isomers) 40.00% 0.400
4630 Reducers N/A--assume all emitted Ethylbenzene 1.00% 0.010
4630 Reducers N/A--assume all emitted Methyl Ethyl Ketone 40.00% 0.400
4630 Reducers N/A--assume all emitted n-Hexane 5.00% 0.050
4630 Reducers N/A -assume all emitted Toluene 30.00% 0.300
4630 Reducers N/A--assume all emitted Xylene(mixed isomers) 10.00% 0.100
4631 Deltron 2000 Basecoats N/A--assume all emitted 1,2,4-Tri methyl benzene 5.00% 0.050
4631 Deltron 2000 Basecoats N/A--assume all emitted 2-Butoxyethyl Acetate 5.00% 0.050
4631 Deltron 2000 Basecoats N/A--assume all emitted Ethylbenzene 5.00% 0.050
4631 Deltron 2000 Basecoats N/A--assume all emitted Methyl Ethyl Ketone 20.00% 0.200
4631 Deltron 2000 Basecoats N/A--assume all emitted Methyl Isobutyl Ketone 20.00% 0.200
Page 4of8

Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical (%) (%)
4631 Deltron 2000 Basecoats N/A--assume all emitted N-Butyl Alcohol 20.00% 0.200
4631 Deltron 2000 Basecoats N/A-assume all emitted Nickel Compounds 1.00% 0.010
4631 Deltron 2000 Basecoats N/A--assume all emitted Toluene 30.00% 0.300
4631 Deltron 2000 Basecoats N/A--assume all emitted Xylene(mixed isomers) 20.00% 0.200
4635a DCX Hardener N/A--assume all emitted Hexamethylene diisocyanate 1.00% 0.010
4635a DCX Hardener N/A--assume all emitted Isophorone Diisocyanate 1.00% 0.010
4635b DFX11 Hardener N/A--assume all emitted Isophorone Diisocyanate 5.00% 0.050
4635c Primer Surface Catalyst(K201) N/A--assume all emitted Ethyl Acetate 10.00% 0.100
4635c Primer Surface Catalyst(K201) N/A assume all emitted Hexamethylene diisocyanate 1.00% 0.010
4635c Primer Surface Catalyst(K201) N/A--assume all emitted Toluene 10.00% 0.100
4923 Laminex Fillet Manual Styrene 30.00% 0.038
519 Poly-Bond B39 Adhesive Mechanical Non-Atomized Styrene 24.40% 0.031
5212100 3M Super Duty 05955 N/A--assume all emitted 1,2,4-Trimethylbenzene 1.00% 0.010
5221010 Sikaflex 291,White N/A--assume all emitted Xylene(mixed isomers) 5.00% 0.050
5223003 Adhesive,K-Grip 201 N/A--assume all emitted Methylene Chloride 78.00% 0.780
5223010 Oatley PVC Cement N/A No reportable HAPs 0.00% 0.000
5223038 Tite Bond II Adhesive(Wood Glue) N/A No reportable HAPs 0.00% 0.000
6040 Polycor Black Gelcoat(944B025) Gelcoat Application-MMA Methyl Methacrylate 4.63% 0.038
6040 Polycor Black Gelcoat(944B025) Gelcoat Application Styrene 34.11% 0.158
647A Polyurethane Foam Part A N/A No reportable HAPs 0.00% 0.000
647B Polyurethane Foam Part B N/A No reportable HAPs 0.00% 0.000
864 Sikaflex 291,White N/A--assume all emitted Xylene(mixed isomers) 5.00% 0.050
865 Sikaflex 221,Black N/A--assume all emitted Xylene(mixed isomers) 5.00% 0.050
Page 5 of 8

1
Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical (%) (%)
8821 Kantstick Mold Cleaner N/A--assume all emitted Methyl Ethyl Ketone 50.00% 0.500
8821 Kantstick Mold Cleaner N/A--assume all emitted Toluene 50.00% 0.500
8929 AOTECH White Resin(#14 Ultra) N/A--assume all emitted Styrene 15.00% 0.150
9427 Kantstick Maxi Pull N/A No reportable HAPs 0.00% 0.000
948AA740 Polycor Tinman Gelcoat(948AA740) Gelcoat Application-MMA Methyl Methacrylate 4.28% 0.038
948AA740 Polycor Tinman Gelcoat(948AA740) Gelcoat Application Styrene 30.14% 0.134
951AA740 Armorcote Tinman Gelcoat(951AA740) Gelcoat Application-MMA Methyl Methacrylate 9.04% 0.075
951AA740 Armorcote Tinman Gelcoat(951AA740) Gelcoat Application Styrene 30.52% 0.136
951 LA855 Cobalt Gelcoat(951 LA855) Gelcoat Application-MMA Methyl Methacrylate 9.01% 0.060
951 LA855 Cobalt Gelcoat(951 LA855) Gelcoat Application Styrene 32.54% 0.145
951 RA699 Candy Apple Gelcoat(951 RA699) Gelcoat Application-MMA Methyl Methacrylate 8.06% 0.060
951 RA699 Candy Apple Gelcoat(951 RA699) Gelcoat Application Styrene 32.09% 0.143
954AH187 Light Gray Gelcoat(954AH187) Gelcoat Application-MMA Methyl Methacrylate 4.39% 0.038
954AH187 Light Gray Gelcoat(954AH187) Gelcoat Application Styrene 35.36% 0.178
9631A507 Seattle Grey Gelcoat(9631A507) Gelcoat Application-MMA Methyl Methacrylate 5.56% 0.045
9631A507 Seattle Grey Gelcoat(9631A507) Gelcoat Application Styrene 21.87% 0.097
963LA860 True Blue Gelcoat(963LA860) Gelcoat Application-MMA Methyl Methacrylate 5.38% 0.045
963LA860 True Blue Gelcoat(963LA860) Gelcoat Application Styrene 23.17% 0.103
963YK140 Canary Yellow Gelcoat(963YK140) Gelcoat Application-MMA Methyl Methacrylate 5.58% 0.045
963YK140 Canary Yellow Gelcoat(963YK140) Gelcoat Application Styrene 22.69% 0.101
NONE1 3M Perfect It 05936 N/A No reportable HAPs 0.00% 0.000
NONE10 Mold Sealer(TR910) N/A No reportable HAPs 0.00% 0.000
NONE11 Staput Adhesive(SP4H) N/A No reportable HAPs 0.00% 0.000
Page 6 of 8

Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical (%) (%)
NONE12 Filler Bondo Manual Styrene 20.00% 0.025
NONE13 Adhesive(3M Super 77) N/A--assume all emitted n-Hexane 1.00% 0.010
NONE15 Cleaner(HPP5) N/A No reportable HAPs 0.00% 0.000
NONE17 Armornex Base White Gelcoat(953WJ301) Gelcoat Application-MMA Methyl Methacrylate 5.00% 0.038
NONE17 Armornex Base White Gelcoat(953WJ301) Gelcoat Application Styrene 29.06% 0.129
NONE18 Lupersol DDM-9 N/A Dimethyl Phthalate 32.00% 0.013
NONE18 Lupersol DDM-9 N/A--assume all emitted Methyl Ethyl Ketone 2.00% 0.020
NONE19 Orange Hi Gloss(608-021) N/A--assume all emitted Methyl Ethyl Ketone 6.40% 0.064
NONE19 Orange Hi Gloss(608-021) N/A--assume all emitted Styrene 31.40% 0.314
NONE19 Orange Hi Gloss(608-021) N/A--assume all emitted Xylene(mixed isomers) 0.20% 0.002
NONE2 3M Imperial 06044 N/A No reportable HAPs 0.00% 0.000
NONE20 Arjay Putty Mechanical Non-Atomized Styrene 30.00% 0.032
NONE21 Styrene Monomer N/A--assume all emitted Styrene 100.00% 1.000
NONE22 Aqua Blue 200 N/A No reportable HAPs 0.00% 0.000
NONE3 Wax Paste JR 102&104) N/A No reportable HAPs 0.00% 0.000
NONE4 Glaze Sealer JR 301) N/A--assume all emitted Formaldehyde 0.50% 0.005
NONE5 Wax Honey(P5401520) N/A No reportable HAPs 0.00% 0.000
NONE6 Mold Release(TR210) N/A--assume all emitted Cumene 2.80% 0.028
NONE6 Mold Release(TR210) N/A--assume all emitted Toluene 80.00% 0.800
NONE6 Mold Release(TR210) N/A--assume all emitted Xylene(mixed isomers) 3.50% 0.035
NONE7 Mold Release(TR216) N/A--assume all emitted 1,2,4-Trimethylbenzene 20.30% 0.203
NONE7 Mold Release(TR216) N/A--assume all emitted Cumene 2.80% 0.028
NONE7 Mold Release(TR216) N/A--assume all emitted Toluene 40.00% 0.400
Page 7 of 8

Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical (%) (%)
NONE7 Mold Release(TR216) N/A--assume all emitted Xylene(mixed isomers) 3.50% 0.035
NONE8 Mold Release(TR900) N/A No reportable HAPs 0.00% 0.000
NONE9 Mold Cleaner(TR905) N/A--assume all emitted Methyl Ethyl Ketone 50.00% 0.500
NONE9 Mold Cleaner(TR905) N/A--assume all emitted Toluene 50.00% 0.500
Page 8 of 8

Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2004
1037 Usage(gal). 1,881.21 VOC Content(wYYo): 0.445 VOCs(ibs): 884.5
Resin(Corve 8153) Usage(lbs): 16,379.8 HAP Content(wt%): 0.445 HAPs(lbs): 884.5
Density(Ib/gal): 8.71
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
100-42-5 Styrene 44.50% 0.054 884.5
1328 Usage(gal): 381.01 VOC Content(wt%): 0.300 VOCs(lbs): 112.2
Arjay 1201 Putty Usage(lbs): 3,495.3 HAP Content(wt%): 0.300 HAPs(lbs): 112.2
Density(Ib/gal): 9.17
CAS No Chemical Weight% E-Factor HAPiTAP Lbs
100-42-5 Styrene 30.00% 0.032 112.2
---
13292 Usage(gal): 445.0 VOC Content(wt%): 0.940 VOCs(lbs): 379.2
IPS Adhesive Activator Usage(lbs): 4,034.2 HAP Content(wt%): 0.800 HAPs(lbs): 322.7
Density(lb/gal): 9.07
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
84-74-2 Dibutyl Phthalate 80.00% 0.080 322.7
13293 Usage(gal): 2,733.0 VOG Content 0.700 VOCs(lbs): 4,004.3
IPS Adhesive Usage(lbs): 21,881.5 HAP Content(wt%): 0.650 HAPs(lbs): 2,910.2
Density(Ib/gal): 8.01
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 65.00% 0.133 2,910.2
13375 Usage(gal): 9.0 VOC Content(wM 0.005 VOCs(lbs): 0.5
Pro-Set 125 Resin Usage(lbs): 88.0 HAP Content(wt%). 0.000 IAAPs(lbs): 0.0
Density(lb/gal): 9.51
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
13376 Usage(gal): 1,285.8 VOC Content(wt%) 0.006 VOCs(lbs): 64.3
Pro-Set 229 Resin Hardener Usage(lbs): 10,412.9 HAP Content(wt%). 0.000 HAPs(lbs): 0.0
Density(lb/gal): 8.10
CAS No Chemical Weight% E-Factor HAPITAP Lbs
No reportable HAPs 0.00% 0.000 0.0
1343 Usage(gal): 215.0 VOC Content(wt°,,'t 0.338 VOCs(lbs): 387.0
Armorflex Fountain White Gel Usage(lbs): 2,333.0 HAP Content(wt '. 0.339 HAPs(lbs): 387.0
(953WJ728) Density(lb/gall: 10.85
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 5.00% 0.038 87.5
100-42-5 Styrene 28.85% 0.128 299.6
©Value Environmental 6/12/2005 Page 1 of 14

Fountain Powerboats Washington Plant: Usage and VOC&HAP Emissions Year Ending: December 2004
13439 usage tgat, 0.3 vQ�, 0.998 _ 2.2
Imron Accelrator Usage(lbs): 2.2 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 8.12
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
13512 Usage(gal): 37.2 VOC Content(wt%): 0.813 VOCs(lbs): 222.0
Cherry Wood Stain Usage(lbs): 272.9 HAP Content(wt%): 0.126 HA 34.4
Density(lb/gal): 7.34
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
100-41-4 Ethylbenzene 0.60% 0.006 1.6
N/A Glycol Ethers 8.00% 0.080 21.8
1330-20-7 Xylene(mixed isomers 4.00% 0.040 10.9
13567 Usage(gal): 111,585.8 VOC Content(wt%): 0.350 v- ,s Sibs; 74,915.3
Resin(VEX-201-958-F) Usage(lbsi_,070,219.0 HAP Content(wt%): 0.350 HAPs(lbs): 74,915.3
Density(lb/gal): 9.59
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
100-42-5 Styrene 35.00% 0.070 74,915.3
13570 b Usage(gall 58.3 VOC Content(wt%): 0.814 VOCs(lbsir 449.4
Sea Grip 5000 Usage(Ibs 552.0 HAP Content(wt%): 0.000 HAPs(Ibs) 0.0
Density(lb/gal): 9.47
CAS No Chemical weiW-° E-Factor HAP/TAP Lbs
No reportable HAPs 0,00% 0.000 0.0
13665 Usage(gat. 15,203.5 VOC Content(wt", 0.277 VOCs(Ibsi 26,125.3
Gelcoat(963WJ825) Usage(Ibs) 170,542.0 HAP Content(wt°V, 0.277 HAPs(Ibsj. 26.127.0
Density(lb/gai; 11.22
CAS No Chemical Weight% E-Factor HAPTAP Lbs
80-62-6 Methyl Methacrylate 8.46% 0.068 11,511.6
100-42-5 Styrene 19.26% 0.086 14,615.4
13706 Usage(gal): 241.5 OC Content(wt%): 0.115 VOCs(Ibs): 339.3
AWLGARD Interior White Paint Usage(lbs): 2,958.4 HAP Content(wV/, 0.020 HAPs(lbs): 59.2
(WT8202) Density(lb/ga 12.25
CAS No Chemical Weight% E-Facto HAP/TAP Lbs
N/A Glycol Ethers 2.00% 0.020 59.2
13706-ACT Usage(gal): 80.5 VOC Content(wt%): 0.094 VOCs(lbs): 70.2
AWLGARD Converter(WT3201) Usage(Ibs): 749.6 HAP Content(wt%): 0.000 HAPs(Ibs) 0.0
Density(lb/gal): 9.31
CAS No Chemical Weight% E-Factor HAPITAP Lbs
No reportable HAPs 0.00% 0.000 0.0
©Value Environmental 6/12/2005 Page 2 of 14

Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2004
13794 Usage(gal): 491.1 VOC Content(wt°i%): 0.775 VOCs(Ibs): 2,302.2
3M Foam Fast 74 Cylinder Usage(Ibs): 2,969.6 HAP Content(wt%): 0.000 1 HAPs(Ibs): 0.0
Psray Adhesive Density(lbigal): 6.05
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
13864 Usage(gal): 0.9 VOC Content(wt%): 0.504 VOCs(Ibs): 4.0
Adhesive Integra Usage(Ibs): 7.9 HAP Content(wt%): 0.504 HAPs(Ihs): 4.0
Density(lb/gal): 8.88
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
84-74-2 Dibutyl Phthalate 0.36% 0.004 0.0
80-62-6 Methyl Methacrylate 50.02% 0.500 3.9
- ................................
1446 Usage(gal): 82.3 VOC Content(wt,o. 0.394 VOCs(Ibs): 151.4
Armorcoate Yellow Gelcoat Usage(lbs): 789.0 HAP Content(wt%): 0.402 HAPs(Ibs): 157.4
(951YA596) Density(lbigal): 9.59
CAS No Chemical Weight% E-Factor HAPITAP Lbs
80-62-6 Methyl Methacrylate 8.80% 0.060 47.3
100-42-5 Styrene 31.35% 0.140 110.1
1447 Usage(gal): 15.2 VOC Content(wt%): 0.350 VOCs(lbs): 27.4
Prowler Yellow Gelcoat Usage(Ibs): 157.01 HAP Content(wt%): 0.350 HAPs(lbs): 27.4
(948YA596) Density(lb/gal): 10.36
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 4.27% 0.038 5.9
100-42-5 Styrene 30.77% 0.137 21.5
1500007 Usage(gal): 11.1 VOC Content(wt%): 1.000 VOCs(lbs): 78.4
Dykem Blue 80600 Usage(lbs): 78.41 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Density(lb/gal): 7.09
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
1500009 Usage(gal): 153.0 VOC Content(wt%): 0.356 VOCs(lbs): 590.5
Gray Sand Primer(707-007X) Usage(Ibs): 1,658.81 HAP Content(wt%): 0.336 1 HAPs(lbs): 557.4
Density(lbigal): 10.84
GAS No Chemical Weight% E-Factor HAP/TAP Lb
78-93-3 Methyl Ethyl Ketone 11.50% 0.115 190.8
100-42-5 Styrene 22.10% 0.221 366.6
1500110 Usage(gal): 1,781.61 VOC Content(wt%): 0.360 VOCs(lbs): 229.4
Hi Point 90 Red(MEKP) Usage(lbs): 15,928.0 HAP Content(wt%): 0.360 HAPs(lbs): 229.4
Density(lb/gal): 8.94
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
131-11-3 Dimethyl Phthalate 36.00% 0.014 229.4
©Value Environmental 6/12/2005 Page 3 of 14

Fountain Powerboats Washington Plant: Usage and VOC& HAP Emissions Year Ending: December 2004
1500230 Usage(gat;- 81.4 v0u i;o€wia(wi'/,;. 0.468 213.1
Black Tooling Gelcoat(94513201) Usage(lbs): 739.9 HAP Content(wt%): 0.468 HAPs flbsl: 213.1
Density(lb/gal): 9.09
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 4.37% 0.038 27.7
100-42-5 Styrene 42.40% 0.251 185.3
1500230m Usage(gat): 94.1 VOC Content(wt°5, 0.388 PCs(lbs): 176.4
Black Tooling Gelcoat Usage(Ibs): 855.4 HAP Content(wt%, 0.388 HAPs(Ibs): 176.4
(965BJ115) Density(lb/gal): 9.09
GAS No Chemical Weight% E-Factor HAP7/:0 Lhs
67-56-1 Methyl Alcohol 0.72% 0.007 6.2
100-42-5 Styrene 38.07% 0.199 170.2
1500500 Usage(gag; 3,294.0 VOC Content(wt%): 0.316 VOCs(lbs): 668.6
Core-Bond 870 Adhesive Usage(lbs): 19,779.8 HAP Content(wt%): 0.316 HAPs{Ibs): 668.6
Density(lb/gal): 6.00
CAS No Chemical Weight% HAPITAP Lbs
100-42-5 Styrene 31.60% 0.034 668.6
1500600 Usage(gal). 999.7 VOC Content(wt%): 0.000 VOCs(lbs) 0.0
Foam(Elastopor P15390R) Usage(lbs): 9,057.0 HAP Content(wt%): 0.000 HAPs(Ibs) 0.0
Density(lb/gal): 9.06
CAS No Chemical Weight% E-Fa HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
1500605 Usage(gal): 886.2 VOC Content(wt%): 0.000 VOCs(Ibs) 0.0
Foam(Elastopor P1001 U) Usage(Ibs): 9,057.0 HAP Content(wt%): 0.000 HAPs(ibs): 0.0
Density(lb/gal): 10.22
CAS No Chemical Weight% E-Factor HAPITAP Lbs
No reportable HAPs 0.00% 0.000 0.0
1575 Usage(gal): 50.0 VOC Content(wt%): 0.921 VOCs(lbs): 79.0
Polycor 8%Wax Solution Usage(Ibs'': 374.8 HAP Content(wt%): 0.920 HAPs(lbs): 78.8
(970C949) Density(Ib/gal): 7.50
CAS No Chemica Weight% E-Factor HAP/TAP Lbs
100-42-5 Styrene 92.00% 0.210 78.8
1675 Usage(gall 39.6 VOC Content(wt%): 0.638 VOCs(Ibs): 210.4
3M Finesse It#05928 Usage(lbsi 329.8 HAP Content(wt%): 0.000 HAPs(Ibs) 0.0
Density(Ib/gal): 8.34
CAS No Chemical Weight% E-Factor HAPITAP Lb,,
No reportable HAPs 0.00% 0.000 0.0
©Value Environmental 6/12/2005 Page 4 of 14

Fountain Powerboats Washington Plant: Usage and VOC& HAP Emissions Year Ending: December 2004
1700 Usage(ga;, 85.1 VOc Gontent 0.574 vu s tw-,. 81.4
Patchaid(970XJ037) UFaae{It e' 730.6 HAP Content(wt%): 0.575 HAPs(Ilas� 81.4
Density(Ib/gal): 8.58
CAS No Chemic& Weight% E-Factor HAP/TAP Lbs
100-42-5 Styrene 57.45% 0.111 81.4
1700a Usage(gal): 80.8 VOC Content(wt%): 0.358 VOCs(lbs): 356.2
Sealer Usage(lbs): 995.7 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Density(lb/gal): 12.32
CAS No Chemical Weight% E-Factor HAPiTAP Lbs
No reportable HAPs 0.00% 0.000 0.0
2055 Usage(gal): 63.4 VOC Content(wt%): 0.690 VOCs(Ibs): 394.6
Polyurethanes(Concept Acrylic) Usage(lbs): 571.9 HAP Content(wt%): 0.360 HAPs(lbs) 205.9
Density(lb/gal): 9.02
GAS Chemical Weight% E-Factor HADfTAP Lh-,
100-41-4 Ethylbenzene 5.00% 0.050 28.6
100-42-5 Styrene 1.00% 0.010 5.7
1330-20-7 Xylene(mixed isomers 30.00% 0.300 171.6
2378 Usage(gal): 0.5 VOC Content(wt%): 0.400 VOCs(lbs): 1.9
Corian Joint Adhesive Usage(lbs): 4.71 HAP Content(wt%): 0.400 1 HAPs(lbs): 1.9
Density(Ib/gal): 10.17
CAS No Chemical Weight% E-Factor HAPiTAP Lbs
80-62-6 Methyl Methacrylate 40.00% 0.400 1.9
2378a Usage(gal): 28.0 VOC Content(wt%): 0.376 VOCs(lbs). 93.0
Orange VE Tooling(1908-045) Usage(lbs): 247.5 HAP Content(wt%): 0.373 HAPs(lbs): 92.3
Density(lb/gal): 8.84
CAS No Chemical Weight% E-Factor HAP/TAP Lh-
100-42-5 Styrene 37.30% 0.373 92.3
2379 Usage tvo. 0.31 VOC Content(wt%): 0.000 VOCs(lbs): 0.0
Corian Joint Adhesive Usage(lbs): 2.31 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 8.71
CAS No Chemical Weight% E-Factor HAPITAP Lbs
No reportable HAPs 0.00% 0.000 0.0
2476 Usage(gal): 525.7 VOC Content(wt%): 0.360 VOCs(Ibs): 67.7
Hi Point 90 Clear(MEKP) Usage(lbs): 4,700.0 HAP Content(wt%): 0.360 HAPs(lbs; 67.7
Density(lb/gal): 8.94
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
131-11-3 Dimethyl Phthalate 36.00% 0.014 67.7
©Value Environmental 6/12/2005 Page 5 of 14

Fountain Powerboats Washington Plant: Usage and VOC& HAP Emissions Year Ending: December 2004
2773 usage tyai): 537.0 1 y: 0.100 391.4
Slocum Adhesive(M-341) Usage(lbs): 3,914.3 HAP Content(wt%): 0.000 0.0
Density(lb/gal): 7.29
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
2817 Usage(gal): 260.8 VOC Content(wt%): 0.356 VOCs(lbs` 1,006.6
Gray Sand Primer(707-007X) Usage(lbs): 2,827.E ;P rat%): 0.336 950.1
Dersrty{Ib/gal): 10.84
CAS No Chemical weight'}`o E-Factor HAP/T>-
78-93-3 Methyl Ethyl Ketone 11.50% 0.115 325.2
100-42-5 Styrene 22.10% 0.221 624.9
2854 Usage jyatj: 14.9 vu(;Content(wt a): 0.286 VO(;s(lbs)' 49.3
High Solids Imron Usage(lbs): 172.1 HAP Content(wt%): 0,117 HAPs{Ib i 20.1
Density(Iblgal): 11.53
CAS No Chemical Weight'; E-Factor HAPITAP Lbs
100-41-4 Ethylbenzene 0.30% 0.003 0.5
N/A Glycol Ethers 7.90% 0.079 13.6
108-88-3 Toluene 1.50% 0.015 2.6
1330-20-7 Xylene(mixed isomers 2.00% 0.020 3.4
2855 Usage(gal): 8.8 VOC Content(wt'o): 0.468 VOCs(Ibs . 33.2
Imron Activator Usage(lbs): 71.1 HAP Content(wtI/` 0.115 HAPs(lbs): 8.2
Density(lb/go ; 8.12
GAS No Ghe13-oval Weight% E-Factor HAPJAP Lbs
100-41-4 Ethylbenzene 0.30% 0.003 0.2
N/A Glycol Ethers 2.50% 0.025 1.8
78-93-3 Methyl Ethyl Ketone 2.90% 0.029 2.1
108-88-3 Toluene 4.80% 0.048 3.4
1330-20-7 Xylene(mixed isomers 1.00% 0.010 0.7
3035 Usage(gal): 0.6 ry C Wean€ 1.000 5.9
Ampreg 22 Laminating Resin Usage(lbs): 5.9 AP Content(�_' 0.000 F --0.0
Density(ih,'grs 9.59
CAS No Chemical Wsinht 1, actor
No reportable HAPs Mo% 0.000 0.0
3525 Usage(gah 28.0 VOC Content(wt°'o): 0.478 )Cs 113.9
Clear Hi-Gloss Additive(904- Usage(Ibs; E238.2 AP Content(wt%): 0.478 ;Ps 113.9
001X) Density(lb/gal): 8.51
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
78-93-3 Methyl Ethyl Ketone 14.20% 0.142 33.8
100-42-5 Styrene 33.60% 0.336 80.0
©Value Environmental 6/12/2005 Page 6 of 14

Fountain Powerboats Washington Plant: Usage and VOC&HAP Emissions Year Ending: December 2004
3699 y�iya!, 35.1 ..or.t ,i,.,-j. 0.501 27.9
Speed Patchaid (970X900) Usage(lbs). 310.3 HAP Content(wt%): 0.501 HAPs(lbs): 27.9
Density(Ib/gal): 8.83
CAS No Chemical Weight% E-Factor HAPJAP Lbs
100-42-5 Styrene 50.12% 0.090 27.9
3895 Usage(gal): 294.0 VOC Content(wt%): 0.200 VOCs(lbs): 568.9
BPO/5 Paste Catalyst Usage(lbs). 2,844.3 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(Ib/gal): 9.67
CAS No Chemical Weight% E-Facto HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
3896 Usage F; 27,095.0 VOC Content(wt%): 0.400 VOCs(Ibs): 6,304.6
K-Lite 750 Usage(iot, 135,583.4 HAP Content(wt%): 0.400 HAPs(lbs): 6,304.6
Density(Ib/cal): 5.00
CAS No CP^.,; Weight% F-Factor HAP(TAP Lbs
100-42-5 Styrene 40.00% 0.047 6,304.6
4324 Usage{ _csj: 818.3 VOC Content(vrr,,). 0.400 VOCs(Ibs): 1,884.4
Polycor White Gelcoat Usage(lbs): 8,585.0 HAP Content(wt%): 0.400 HAPs(lbs"= 1,884.4
(948WJ201) Density(lb/gal): 10.49
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
100-42-5 Styrene 40.00% 0.220 1,884.4
435 Usage(gal): 41.8 VOC Content(wt%): 0.020 VOCs(lbs) 9.3
Marine Sealant Fast Cure 5200 Usage(lbs): 463.8 HAP Content(wt%): 0.000 HAPs(Ibss 0.0
Density(Ib/gal): 11.09
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
4629 Usage(gal): 204.3 VOC Content(wt%): 0.508 Cs(Ibs'; 824.7
Clear Coats Usage(lbs): 1,624.0 HAP Content(wt%): 0.760 HAPs(lbs: 1,234.3
Density(lb/gal): 7.95
Chemical Weioht% E-Factor HAP/TAP Lbs
100-41-4 Ethylbenzene 5.00% 0.050 81.2
108-10-1 Methyl Isobutyl Ketone 20.00% 0.200 324.8
100-42-5 Styrene 1.00% 0.010 16.2
108-88-3 Toluene 10.00% 0.100 162.4
1330-20-7 Xylene(mixed isomers 40.00% 0.400 649.6
©Value Environmental 6/12/2005 Page 7 of 14

Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2004
4630 yi k�3ai, 194.7 VGu 4,tmteot{wt:<; 1.000 1,346.1
Reducers Usage(Ibs): 1,346.1 HAP Content(wt%). 0.860 HAPs{lbs): 1,157.7
Density(Iblgal' 6.91
CAS No neaaical Weight% -Facto" HAPITAP Lbs
100-41-4 Ethylbenzene 1.00% 0.010 13.5
78-93-3 Methyl Ethyl Ketone 40.00% 0.400 538.4
110-54-3 n-Hexane 5.00% 0.050 67.3
108-88-3 Toluene 30.00% 0.300 403.8
1330-20-7 Xylene(mixed isomers 10.00% 0.100 134.6
4631 Usage(9,; 141.4 iOC Content(wt%) 0.860 VOCs(lbs): 1,034.4
Deltron 2000 Basecoats Usage(lbs): 1,202.8 HAP Content(wt°lo). 0.960 HAP,(lbs) 1,154.7
Density(Ib/gal) 8.51
CAS INn Chemical Weight% E-Fac': HAPITAP Lbs
100-41-4 Ethylbenzene 5.00% 0.050 60.1
78-93-3 Methyl Ethyl Ketone 20.00% 0.200 240.6
108-10-1 Methyl Isobutyl Ketone 20.00% 0.200 240.6
N/A Nickel Compounds 1.00% 0.010 12.0
108-88-3 Toluene 30.00% 0.300 360.8
1330-20-7 Xylene(mixed isomers 20.00% 0.200 240.6
4635a Usage(gal): 14.2 VOC Content(wt%/, 0.161 VOCs(lbs): 20.5
DCX Hardener Usage(lbs): 127.3 HAP Content(wtW 0.010 HAPs(Ibs) 1.3
Density(lb/gal'; 8.96
CAS No Chemical �104eight% E-Facto: iiAPj TAP Lbs
822-06-0 Hexamethylene diisoc 1.00% 0.010 1.3
4635c Usage(gal): 16.2 ")C Content(wt44.` 0.583 VOCs(lbs): 76.8
Primer Surface Catalyst(K201) Usage(Ibs): 131.7 HAP Content(-V& 0.110 HAPs(lbs): 14.5
Density(lb/gal): 8.15
CAS No Chemical Weight% E-Factor HAPITAP!bs
822-06-0 Hexamethylene diisoc 1.00% 0.010 1.3
108-88-3 Toluene 10.00% 0.100 13.2
4923 t, 1): 163.0 VOC Content(wt%}: 0.300 51.4
Laminex Fillet 1,359.4 HAP Content(wt% : 0.300 51.4
Density(Ib/gal; 8.34
GAS No aaica'i Weight% E-Factor HAP/TAP Lbs
100-42-5 Styrene 30.00% 0.038 51.4
519 Usage(gal): 1,756.0 VOC Content(wt%): 0.244 VOCs(lbs): 494.6
Poly-Bond B39 Adhesive Ussr,@(lb@`=.' 16,109.5 HAP Content(wt%) 0.244 HAPs(lbs). 494.6
Density(lb/gal): 9.17
CAS N w Chemical Weight% E-Factor HAP/TAP Lbs
100-42-5 Styrene 24.40% 0.031 494.6
©Value Environmental 6/12/2005 Page 8 of 14

Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2004
5221010 9.1 alvi, I I'W€ „j: 0.082 = ., 7.4
Sikaflex 291,White Usage(lbs): 90.5 HAP Content(wt%): 0.050 HAPs(lbs): 4.5
Density(lb/gal): 9.92
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
1330-20-7 Xylene(mixed isomers 5.00% 0.050 4.5
5223003 Usage(gal): 501.01 VOC Content(wt%): 0.780 VOCs(lbs): 4,073.9
Adhesive,K-Grip 201 Usage(Ibs): 5,222.9 HAP Content(wt%): 0.780 HAPs(Ibs): 4,073.9
Density(Ib/gal): 10.43
CAS No Chemical Weight% E-Factor HAPITAP Lbs
75-09-2 Methylene Chloride 78.00% 0.780 4,073.9
5223010 Usage(gal): 3.0 VOC Content(wt%): 0.860 VOCs(lbs): 20.2
Oatley PVC Cement Usage(lbs): 23.5 HAP C- -, 0.000 HAPs(Ibs): 0.0
D 7.84
Chemical Weight% E-Factor HAP;'TAP I,bs
No reportable HAPs 0.00% 0.000 0.0
5223038 Usage(gat): 285.0 VOC Content(wt%): 0.012 VOCs(Ibs): 31.3
Tite Bond II Adhesive(Wood Usage(Ibsj, 2,593.5 HAP Content(wt%): 0.000 HAPs(lbs) 0.0
Glue) Density(Ib/gal): 9.10
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
6040 Usage(gal) 1,769.E VOC Content(wt°t°): 0.387 bs): 3,493.5
Polycor Black Gelcoat(944B025) Usage(I` 17,917.0 HAP Content(wt%): 0.387 HAPs(Ibsi: 3,493.8
Density(Ib/gal): 10.12
CAS No Chemical E-F.,, HAP/TAP Lbs
80-62-6 Methyl Methacrylate 4.63% 0.038 671.9
100-42-5 Styrene 34.11% 0.158 2,821.9
647A Usage(gal): 1,018.2 VOC Content{vat;-3): 0.000 VOCs(lbs): 0.o
Polyurethane Foam Part A t.f aqn Obs'3 10,529.7 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(Ibtgal): 10.34
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
647E Usage(gall- 97.7 content(wt%): 0.000 VOCs(lbs): 0.0
Polyurethane Foam Part B Use:. 978.2 HAP Content(wt°t) 0.000 HAPs(lbs): 0.0
Density(Ibigal): 10.01
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
©Value Environmental 6/12/2005 Page 9 of 14

Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2004
864 _,: ,_ 126.6 0.082 102.5
Sikaflex 291,White two,(lh� 1,256.0 HAP Content(wt°'): 0.050 HAPs Obsl 62.8
Density(Ibigal): 9.92
CAS No Chemical Weight% E-Facto=, HAP/TAP Lbs
1330-20-7 Xylene(mixed isomers 5.00% 0.050 62.8
865 Usage(c;_-; 38.9 VOC Content(wt°%, 0.050 VOCs(lbs); 20.6
Sikaflex 221,Black Usage(lbs): 412.2 HAP Content(wt%): 0.050 HAPs(lbs): 20.6
Density(lb/gal): 10.59
CAS No Chemical Weight% E-Factor HAP1T;'
1330-20-7 Xylene(mixed isomers 5.00% 0.050 20.6
8821 Usage(gal): 34.0 VOC Content(wt%): 1.000 CCs(Ibs): 272.0
Kantstick Mold Cleaner Usage(lbs): 272.0 HAP Content(wt%): 1.000 HAPs(lbs): 272.0
Density(lb/gal): 8.00
Chemical Weight% E-Factor HAPJAP Lbs
78-93-3 Methyl Ethyl Ketone 50.00% 0.500 136.0
108-88-3 Toluene 50.00% 0.500 136.0
8929 Usage(gal' 6.0 VOC Content(wt%): 0.150 VOCs(lbs): 12.8
AOTECH White Resin(#14 Usage('':: . 85.6 HAP Content(wt%): 0.150 HAPs(lbs): 12.8
Ultra) Density(Iblgal): 14.26
CAS No Chemical Weight% E-Facto HAP/TAP Lbs
100-42-5 Styrene 15.00% 0.150 12.8
9427 Usage(gal): 432.0 1.000 2,648.1
Kantstick Maxi Pull Usage(Ibs): 2,648.1 HAP Content(wt-- 0.000 HAPs(Ibs, 0.0
Density(lb/gal): 6.13
CAS No Chemica Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
948AA740 Usage(gal): 9.4 VOC Content(wt%). 0.344 VOCs(Ib-, 17.2
Polycor Tinman Gelcoat Usage(lbs): 100.0 HAP Content(wt%): 0.344 I!APs(Ibs): 17.2
(948AA740) Density(Iblgal): 10.65
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 4.28% 0.038 3.8
100-42-5 Styrene 30.14% 0.134 13A
951AA740 Usage(gal): 50.0 VOC Content(wt%): 0.396 VOCs(lbs): 103.3
Armorcote Tinman Gelcoat Usage(Ibs): 490.0 HAP Content(wt%): 0.396 HAPs(lbs): 103.3
(951 AA740) Density(lb/gal): 9.81
CAS No Chemical Weight% E-Factc, HAP/TAP Lbs
80-62-6 Methyl Methacrylate 9.04% 0.075 36.7
100-42-5 Styrene 30.52% 0.136 66.5
©Value Environmental 6/12/2005 Page 10 of 14

Fountain Powerboats Washington Plant:Usage and VOC& HAP Emissions Year Ending: December 2004
951LA855 usage(gai): 50.0 v , i uiaui;i 0.415 96.2
Cobalt Gelcoat(951 LA855) Usage(Ibs): 470.01 HAP Content(wt%): 0.416 HAPs(lbs): 96.3
Density(lb/gal): 9.41
Chemical Weight% E-Factor HAPITAP Lbs
80-62-6 Methyl Methacrylate 9.01% 0.060 28.2
100-42-5 Styrene 32.54% 0.145 68.1
951 RA699 Usage(gal): 14.0 VOC Content(wt%): 0.402 VOCs fl 26.8
Candy Apple Gelcoat Usa�� 132.0 HAP Content(wt%): 0.402 HAPs(lbs): 26.8
(951 RA699) Density(lb/gal): 9.44
CAS No Chemical Weight'% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 8.06% 0.060 7.9
100-42-5 Styrene 32.09% 0.143 18.8
954AH187 Usage(gal): 14.8 VOC Content(wt%): 0.398 VOCs(lbs): 32.3
Light Gray Gelcoat(954AH187) Usage(Ibs) 150.0 HAP Content(wt%): 0.398 HAPs(Ibs): 32.3
Density(lb/gal): 10.13
CAS No Chemical Weight F HAPITAP Lbs
80-62-6 Methyl Methacrylate 4.39% 0.038 5.6
100-42-5 Styrene 35.36% 0.178 26.7
9631A507 Usage(galj. 15.1 VOC Content(wt%): 0.274 V'OCs(lbs). 24.0
Seattle Grey Gelcoat(9631A507) Usage(Ibs): 169.0 HAP Content(wt%): 0.274 HAPs(Ibs): 24.0
Density(Ib/gal): 11.19
CAS No Chemic. Weight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 5.56% 0.045 7.6
100-42-5 Styrene 21.87% 0.097 16.4
963LA860 Usage(gal): 8.8 VOC Content(wt°/ 0.285 VOCs(Ibs): 13.9
True Blue Gelcoat(963LA860) Usage(lbs): 94.0 HAP Content(wt°/.'; 0.286 HAPs(Ibs): 13.9
Density(Iblga! 10.66
CAS No Chemical Weight% HAP/TAP Lbs
80-62-6 Methyl Methacrylate 5.38% 0.045 4.2
100-42-5 Styrene 23.17% 0.103 9.7
963YK140 Usage(gal): 13.6 VOC Content(wt,, 0.283 VOCs(lbs): 21.2
Canary Yellow Gelcoat Usage(lbs): 145.0 HAP Content(wt°/ 0.283 1-11APs(lbs): 21.2
(963YK140) Density(Ib/gai; 10.66
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 5.58% 0.045 6.5
100-42-5 Styrene 22.69% 0.101 14.6
NONE1 Usage(gal): 169.0 VOC Content(wt%): 0.433 VOCs(Ibs): 621.9
3M Perfect It 05936 Usage(Ibs): 1,437.6 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 8.51
Chemical Weight% E-Factc HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
©Value Environmental 6/12/2005 Page 11 of 14

i Year Fountain Powerboats Washington Plant:Usage and VOC 8:HAP Emissions Ye Ending: December 2004
NONE10 Us«g-_ 16.0 0.945 110.4
Mold Sealer(TR910) Usage : 116.8 HAP Content(wt%): 0.000 HAPs(ibs' 0.0
Density(lb/gal): 7.30
Chemical Weight% E-Factor HAPITAP Lbs
No reportable HAPs 0.00% 0.000 0.0
NONE11 Usage(gal): 273.8 VOC Content(wt" 0.672 VOCs(lbs). 1,437.3
Staput Adhesive(SP4H) Usage(lbs): 2,139.4 HAP Content( 0.000 HAPs(lbs) 0.0
Density(lbigal): 7.81
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
NONE12 Usage(gal) 165.3 VOC Content(wt%): 0.200 VOCs(lbs : 40.0
Filler Bondo Usage(lbs). 1,585.4 HAP Content(wt%l- 0.200 HAPs(lbs) 40.0
Density(lb/gal): 9.59
CAS No Chemical Weight% E-Factor HAPRAP Lbs
100-42-5 Styrene 20.00% 0.025 40.0
NONE13 Usag;�(gait: 25.21 VOC Content(wt°/. 0.750 :)Cs(lbs). 110.0
Adhesive(3M Super 77) Usage(lbs): 146.6 HAP Content(wt% . 0.010 Ps(Ibs): 1.5
Density(lb/gal): 5.81
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
110-54-3 n-Hexane 1.00% 0.010 1.5
NONE15 Usage(gal): 1,457.5 VOC Content(wt%): 0.175 VOCs(Ibs; 2,169.8
Cleaner(HPP5) Usage(lbs) 12,398.7 HAP Content(wt%). 0.000 °.Ps(lbs): 0.0
Density(lb/gal): 8.51
CAS No Chemical Weight% E-Factor HAPIT
No reportable HAPs 0.00% 0.000 0.0
NONE17 Usage(gal): 22.4 VOC Content(wt%): 0.341 VOCs(lbs): 40.1
Armorflex Base White Gelcoat Usage(lbs): 240.3 HAP Content(wt%): 0.341 HAPs(lbs): 40.1
(953WJ301) Density(lb/gal): 10.75
Chemical Weight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 5.00% 0.038 9.0
100-42-5 Styrene 29.06% 0.129 31.1
NONE18 Usage(gal): 3.6 VOC Content(wt%): 0.340 VOCs(lbs): 1.1
Lupersol DDM-9 Usage(lbs). 32.7 HAP Content(wt%): 0.340 HAPs(lbs): 1.1
Density(lb/gal): 9.04
CAS No Chemical Weight% HAP/TA-,
131-11-3 Dimethyl Phthalate 32.00% 0.013 0.4
78-93-3 Methyl Ethyl Ketone 2.00% 0.020 0.7
©Value Environmental 6/12/2005 Page 12 of 14

Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2004
NONE19 sage tgaa,: 12.0 v;s a kWL/<>3: 0.380 d:1uv 1. ,1 40.7
Orange Hi Gloss(608-021) Usage(Ibsi: 107.1 9AP Content(wt%): 0.380 HAPs(Ibs): 40.7
Density(Iblgal): 8.92
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
78-93-3 Methyl Ethyl Ketone 6.40% 0.064 6.9
100-42-5 Styrene 31.40% 0.314 33.6
1330-20-7 Xylene(mixed isomers 0.20% 0.002 0.2
NONE2 Usage(gal). 328.6 VOC Content(wt%): 0.660 VOCs(lbs): 2,280.5
3M Imperial 06044 Usage(lbs): 3,453.1 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 10.51
CAS No Chemical Weight% E-Factor HAP.fTAP Lbs
No reportable HAPs 0.00% 0.000 0.0
NONE20 Usage(gal): 125.0 VOC Content(wt%): 0.300 VOCs(lbs): 36.8
Arjay Putty Usage(lbs): 1,146.8 iAP Content(wt`7o): 0.300 HAPs(Ibsj: 36.8
Density(lb/gal): 9.17
CAS No Chemical Weight% E-Factor HAPTTAP Lbs
100-42-5 Styrene 30.00% 0.032 36.8
NONE21 Usage(gal): 5.6 VOC Content(wt%): 1.000 VOCs(Ibs): 42.0
Styrene Monomer Usage(lbs): 42.0 HAP Content(wt%): 1.000 HAPs(lbs): 42.0
Density(Iblgal): 7.51
Chemical W-ight% E-Factor HAP/TAP Lbs
100-42-5 Styrene 100.00% 1.000 42.0
NONE22 Usage(gal). 106.0 V= .Content(wt%): 0.350 VOCs(lbs): 309.4
Aqua Blue 200 Usage(lbs): 884.0 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(Iblgal): 8.34
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
NONE3 Usage(gal): 6.6 VOC Content(wt%): 0.700 VOCs(Ibsj 32.5
Wax Paste JR 102& 104) Usage(Ibs): 46.4 HAP Content(wt%): 0.000 HAPs(Ibs). 0.0
Density(Iblgal): 7.00
CAS No Chemical Weight% E-Factor HAPITAP Lbs
No reportable HAPs 0.00% 0.000 0.0
NONE4 Usage(gal): 7.0 VOC Content(wt%): 0.330 VOCs(Ibs): 20.2
Glaze Sealer(TR 301) Usage(lbs): 61.3 HAP Content(wt%): 0.005 HAPs(lbs): 0.3
Density(Iblgal): 8.75
CAS No Chemical Weight% E-Factor NAP/TAP Lbs
50-00-0 Formaldehyde 0.50% 0.005 0.3
©Value Environmental 6/12/2005 Page 13 of 14

Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2004
NONES I Usage(gal): 144.0 b`OG Cor2tent(wt's,;: 0.700 ui:s 706.4
Wax Honey(P5401520) Usage(Ibs): 1,008.8 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(Ib/gal): 7.01
CAS No Chemical Weight% E-Factof HAPITAP Lbs
No reportable HAPs 0.00% 0.000 0.0
NONE6 Usage(gal): 2.01 VOC Content(wt°f%): 0.958 VOC!;(lbs): 41.4
Mold Release(TR210) Usage(lbs): 43.2 HAP Content(wt%): 0.863 HAPs(lbs): 37.3
Density(lb/gal): 7.20
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
98-82-8 Cumene 2.80% 0.028 1.2
108-88-3 Toluene 80.00% 0.800 34.6
1330-20-7 Xylene(mixed isomers 3.50% 0.035 1.5
NONE? Usage(gal): 14.0 VOC Content(wt%): 0.944 VOCs(lbs): 95.2
Mold Release(TR216) Usage(lbs): 100.81 HAP Content(wt%): 0.463 HAPs(lbs): 46.7
Density(lb/gal): 7.20
CAS No Chemical Weight% E-factor HAPfTAP Lbs
98-82-8 Cumene 2.80% 0.028 2.8
108-88-3 Toluene 40.00% 0.400 40.3
1330-20-7 Xylene(mixed isomers 3.50% 0.035 3.5
NONE8 Usage(gal): 2.0 VOC Content(wt%): 0.959 VOCs(lbs): 14.0
Mold Release(TR900) Usage(lbs): 14.6 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 7.30
CAS No Chemical Weight% E-F" ctor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
NONE9 Usage(gal): 2.0 VOC Content(wt%): 1.000 VOCs(lbs): 14.1
Mold Cleaner(TR905) Usage(lbs): 14.1 HAP Content(wt%): 1.000 HAPs(lbs): 14.1
Density(lblgal): 7.05
CAS No Chemical Weight% E-Factor HAP/TAP
78-93-3 Methyl Ethyl Ketone 50,00% 0.500 7.1
108-88-3 Toluene 50.00% 0.500 7.1
Month(lbs) Month(tons)
VOCs: 147,106 73.55
HAPs: 130,307 65.15
©Value Environmental 6/12/2005 Page 14 of 14

Fountain Powerboats Washington Plant:Usage&Emissions Year Ending: December 2004
Emissions (lbs) Emissions (tons)
HAP?
98-82-8 Cumene 4 0.00
84-74-2 Dibutyl Phthalate 323 0.16
131-11-3 Dimethyl Phthalate 297 0.15
100-41-4 Ethylbenzene 186 0.09
50-00-0 Formaldehyde 0 0.00
N/A Glycol Ethers 96 0.05
822-06-0 Hexamethylene diisocyanate 3 0.00
67-56-1 Methyl Alcohol 6 0.00
78-93-3 Methyl Ethyl Ketone 1,481 0.74
108-10-1 Methyl Isobutyl Ketone 565 0.28
80-62-6 Methyl Methacrylate 15,378 7.69
75-09-2 Methylene Chloride 4,074 2.04
110-54-3 n-Hexane 69 0.03
N/A Nickel Compounds 12 0.01
No reportable HAPs 0 0.00
100-42-5 Styrene 105,344 52.67
108-88-3 Toluene 1,164 0.58
1330-20-7 Xylene(mixed isomers) 1,305 0.65
Subtotal 130,307 65.15
HAP? [J,
141-78-6 Ethyl Acetate 108 0.05
Subtotal 108 0.05
Total 130,415 65.21
©Value Environmental 6/12/2005 Page 1 of 1

Facility Name: Facility ID:
North Carolina Department of Environment and Natural Resources
Division of Air Quality
General Information
If any information already provided to DAO has changed or otherwise is incorrect or,please provide corrections. You may leave
blanks where the information is unchanged(except Facility ID and Name).
Physical(911)Address of Facility:
Name of Responsible Official: 17av ��Sin
Title: 0,7 Telephone#: _(232) _ 7:5 2w 0
IJ e-mail Address:
Mailing Address of Responsible Official: Po Box Y 57
G✓4s ;�, oy, , Nc 27r-g-9
Facility Technical/Permit Mailing Contact:
Title: Telephone#: -
e-mail Address:
Mailing Address of Technical/Permit mailing contact:
Inspection Contact:
Title: Telephone#: -
e-mail Address:
Billing/Invoice Contact:
Title: Telephone#:
e-mail Address:
Billing/Invoice Company:
Billing/Invoice Address:
Standard Industrial Classification(SIC)Code(s):
North American Industry Classification System(NAICS
—six digit)Code(s)—If known:
(see instructions)
Report Prepared by: Telephone#:
E-Mail Address:
D
JUN 1 6 2005
Provide to Appropriate DAO Regional Office as needed. DAf1 WARS
Information on This Form cannot be held confidential. �l

e
2004 Emissions Inventory Review/Data Tracking Form
Facility Name: r 0 p
County/Premise Number: of 0 V t 2l Assigned to: Confidential?
Initial Review/Data Entry
❑ If confidential information received,it has been properly labeled and stored. Sanitized copies have been
received for public use.
❑ Two copies of inventory were received and forms were signed by responsible official.
Inventory Review/Database Entry
9,` Forms appear to be complete Calculations and control efficiencies
supporting emissions appear correct
Er Calculations appear to add up ok ❑" All permitted sources and required
significant activities are quantified
Q" All compliance issues resulting from review are being addressed. (i.e.toxics,emission limitations
exceeded,unpermitted sources)
8 All volatile HAPS/TAPS are included in the VOC total
C;-- All appropriate ID numbers are entered where they should be(Source,Stack)
la' All changes made in the review by AQ staff are in both copies of the inventory before sending to
Central Office.
Comments:
Signature: 3 `
Date Billing Contact & General Data updated in FEES database
J�rP1 I'o
Date Emissions Data loaded into IMPAQ database P t 9 0
Remember: Confidential copies must be properly handled!
(SAAIR\ ADN fN\2004 Emission Inventories\WARO inventory review form.doc)

Inventory Certification Form(Title V)
Facility Name: Fountain Power Boats Facility ID : 0700122
1653 Whichards Beach Road SR 1166 Permit: 06175
Washington,NC 27889 County : Beaufort
DAQ Region :WARO
North Carolina Department of Environment and Natural Resources
Division of Air Quality
Air Pollutant Point Source Emissions Inventory— Calendar Year 2004
These forms must be completed and returned even if the facility did not operate or emissions were zero
The legally defined "Responsible Official" of record for your facility is Jack Clark
This person or one that meets the definition below must sign this certification form.
The official submitting the information must certify that he/she complies with the requirements as specified in Title 15A
NCAC 2Q.0520(b)which references and follows the federal definition.40 CFR Part 70.2 defines a responsible as meaning one
of the following:
1. For a corporation: a president,secretary,treasurer, or vice—president of the corporation in charge of a principal
business function,or any other person who performs similar policy or decision making fimctions for the overall
operation of one or more manufacturing,production,or operating facilities applying for a or subject to a permit and
either
i.the facilities employ more than 250 persons or have gross annual sales or expenditures exceeding$25
million(in second quarter 1980 dollars); or
ii.the delegation of authority to such representatives is approved in advance by the permitting authority;
2. For partnership or sole propietorship; a general partner or the proprietor,respectively;
3. for a muncipality, state,federal,or other public agency includes the chief executive officer having responsibility for the
overall operations of a principal geographic unit of the agency(e.g., a Regional Administrator of EPA).
CERTIFICATIONSTATEMENT:
(Important: Legally Responsible Offi ial read and sign after all submissions are fina
certify that I am the responsible official for this facility,as described above,and hereby certify that the information contained
in this air emissions report,including attached calculations and documentation, is true,accurate and complete. (Subject to legal
enalities of up to$10,000 per occurrence and possible imprisonment as outlined in G.S.§143-215.3(a)(2))
Responsible Official's Signature Below use blue ink): Date Signed:
Printed Nam : Jaek-C4ark a Vic)
Si ature:
This form applies to Title V facilities. If this facility is not classified as Title V,please telephone your regional office Emission
Inventory contact at once for proper forms.
hkrclison@-coa1\�-CLInP0WQ-rba �+►'1
Email address of Responsible Official: jel 6 2J05
Information on this Form cannot be held confidential
DAQ W ARB
1

Fountain Powerboats
2004 Emission Inventory Calculations
VOC,HAP and PM Emission Calculations
This document describes actual Volatile Organic Compound(VOC),Particulate Matter(PM)and
Hazardous Air Pollutant(HAP)emissions from the facility. Emission calculations utilize the
Unified Emission Factors F)for open molding of composites dated July 23,2001. An
attached table lists the basis for each emission factor(E-factor)utilized in the emissions
calculations. A copy of the July 23, 2001 UEF table is also included with this letter.
The gelcoat spray guns are atomized. The styrene emission factor used for gelcoats is from the
gelcoat application row of the UEF table. The Methyl Methacrylate(MMA)emission factor used
for gelcoats is based on the MMA gelcoat application row of the UEF table. The resin guns are
non-atomized. The emission factor for lamination resins is taken from the mechanical non-
atomized row of the UEF table.
Small quantities of highly reactive liquid organic perioxide solutions(e.g.,Hi Point 90)are used
by the reinforced plastics industry to initiate the polymerization reaction in the resin or gelcoat
material. Emission estimates in this permit application are based on the composite Manufacturer
Associations' study, "Emission Factors for Liquid Organic Peroxide Catalysts used in the Open
Molding of Composites." The emission factor for Dimethyl Phthalate(DMP)or other utilized
organic is 0.04%of the available DMP by weight or 0.0144(0.04 x 36%).
Usage of and thus emissions from other raw materials(e.g.,mold cleaners and sealers,etc.)at the
Washington plant are smaller in nature. Emissions from these other material usages and/or
chemicals utilize a similar methodology or conservatively assume all of the chemical is emitted
(e.g., solvents in paints used).
Particulate emissions from painting are calculated assuming a 1%total weight loss with 50
percent of those emissions PM,o and 25 percent of those emissions PM2.5 as a conservative
estimate with no controls.
Particulate emissions from paint usage:
9,9001bs paint bought plant-wide
assume 1%loss as particulate emissions, 50%of that is PM,o and 25%is PM2.5
9,8001bs x 0.01 =98 pounds PM/year=0.049 tons PM/year
98 lbs PM x 0.5 =49 pounds PM10/year=0.025 tons PMro/year
98 lbs PM x 0.25 =24.5 pounds PM2.5/year=0.013 tons PM2.5/year
Particulate emissions from hull and deck grinding:
1,300,000 lbs resin and gelcoat bought plant-wide
assume 1%loss with 25%of that emitted as particulate emissions, 50%of that is PM,o and 25%
is PM2.5.
1,300,000 lbs x 0.01 x 0.25=3,250 pounds PM/year= 1.63 tons PM/year
3,250 lbs PM x 0.5 = 1,625 pounds PM,o/year=0.81 tons PM10/year
3,250 lbs PM x 0.25 =813 pounds PM2.5/year=0.41 tons PM2.5/year

Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical (%) (%)
1037 Resin(Corve 8153) Mechanical Non-Atomized Styrene 44.50% 0.054
1328 Arjay 1201 Putty Mechanical Non-Atomized Styrene 30.00% 0.032
13292 IPS Adhesive Activator N/A--10%emitted per MSDS Benzoyl Peroxide 14.00% 0.014
13292 IPS Adhesive Activator N/A--10%emitted per MSDS Dibutyl Phthalate 80.00% 0.080
13293 IPS Adhesive N/A--assume all emitted Methacrylic Acid 5.00% 0.050
13293 IPS Adhesive Manual Methyl Methacrylate 65.00% 0.133
13375 Pro-Set 125 Resin N/A No reportable HAPs 0.00% 0.000
13376 Pro-Set 229 Resin Hardener N/A No reportable HAPs 0.00% 0.000
1343 Armorflex Fountain White Gel(953WJ728) Gelcoat Application-MMA Methyl Methacrylate 5.00% 0.038
1343 Armorflex Fountain White Gel(953WJ728) Gelcoat Application Styrene 28.85% 0.128
13439 Imron Accelrator N/A No reportable HAPs 0.00% 0.000
13512 Cherry Wood Stain N/A--assume all emitted Ethylbenzene 0.60% 0.006
13512 Cherry Wood Stain N/A--assume all emitted Glycol Ethers 8.00% 0.080
13512 Cherry Wood Stain N/A--assume all emitted Xylene(mixed isomers) 4.00% 0.040
13567 Resin(VEX-201-958-F) Mechanical Atomized Styrene 35.00% 0.070
13570 b Sea Grip 5000 No reportable HAPs 0.00% 0.000
13665 Gelcoat(963WJ825) Gelcoat Application-MMA Methyl Methacrylate 8.46% 0.068
13665 Gelcoat(963WJ825) Gelcoat Application Styrene 19.26% 0.086
13706 AWLGARD Interior White Paint(WT8202) N/A--assume all emitted Glycol Ethers 2.00% 0.020
13706-ACT AWLGARD Converter(WT3201) No reportable HAPs 0.00% 0.000
13794 3M Foam Fast 74 Cylinder Psray Adhesive No reportable HAPs 0.00% 0.000
13864 Adhesive Integra N/A--assume all emitted Dibutyl Phthalate 0.36% 0.004
Page I of 8

Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical (%) (%)
13864 Adhesive Integra N/A--assume all emitted Methyl Methacrylate 50.02% 0.500
1446 Armorcoate Yellow Gelcoat(951YA596) Gelcoat Application-MMA Methyl Methacrylate 8.80% 0.060
1446 Armorcoate Yellow Gelcoat(951 YA596) Gelcoat Application Styrene 31.35% 0.140
1447 Prowler Yellow Gelcoat(948YA596) Gelcoat Application-MMA Methyl Methacrylate 4.27% 0.038
1447 Prowler Yellow Gelcoat(948YA596) Gelcoat Application Styrene 30.77% 0.137
1500007 Dykem Blue 80600 N/A No reportable HAPs 0.00% 0.000
1500009 Gray Sand Primer(707-007X) N/A--assume all emitted Ethyl Acetate 2.00% 0.020
1500009 Gray Sand Primer(707-007X) N/A--assume all emitted Methyl Ethyl Ketone 11.50% 0.115
1500009 Gray Sand Primer(707-007X) N/A--assume all emitted Styrene 22.10% 0.221
1500110 Hi Point 90 Red(MEKP) N/A Dimethyl Phthalate 36.00% 0.014
1500230 Black Tooling Gelcoat(9456201) Gelcoat Application-MMA Methyl Methacrylate 4.37% 0.038
1500230 Black Tooling Gelcoat(9456201) Gelcoat Application Styrene 42.40% 0.251
1500230m Black Tooling Gelcoat(965BJ115) N/A--assume all emitted Methyl Alcohol 0.72% 0.007
1500230m Black Tooling Gelcoat(96513J115) Gelcoat Application Styrene 38.07% 0.199
1500500 Core-Bond B70 Adhesive Mechanical Non-Atomized Styrene 31.60% 0.034
1500600 Foam(Elastopor P15390R) N/A No reportable HAPs 0.00% 0.000
1500605 Foam(Elastopor P1001U) N/A No reportable HAPs 0.00% 0.000
1575 Polycor 8%Wax Solution(970C949) Manual Styrene 92.00% 0.210
1675 3M Finesse It#05928 N/A No reportable HAPs 0.00% 0.000
1700 Patchaid(970XJ037) Manual Styrene 57.45% 0.111
1700a Sealer N/A No reportable HAPs 0.00% 0.000
2055 Polyurethanes(Concept Acrylic) N/A--assume all emitted 0.00% 0.000
2055 Polyurethanes(Concept Acrylic) N/A--assume all emitted 1,2,4-Tri methyl benzene 5.00% 0.050
Page 2 of 8
I
i

Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical (%) (%)
2055 Polyurethanes(Concept Acrylic) N/A--assume all emitted 2-Butoxyethyl Acetate 5.00% 0.050
2055 Polyurethanes(Concept Acrylic) N/A-assume all emitted Ethylbenzene 5.00% 0.050
2055 Polyurethanes(Concept Acrylic) N/A assume all emitted N-Butyl Alcohol 5.00% 0.050
2055 Polyurethanes(Concept Acrylic) N/A assume all emitted Styrene 1.00% 0.010
2055 Polyurethanes(Concept Acrylic) N/A--assume all emitted Xylene(mixed isomers) 30.00% 0.300
2378 Corian Joint Adhesive N/A-No emission per MSDS Methyl Methacrylate 40.00% 0.400
2378a Orange VE Tooling(1908-045) N/A--assume all emitted Styrene 37.30% 0.373
2379 Corian Joint Adhesive N/A No reportable HAPs 0.00% 0.000
2476 Hi Point 90 Clear(MEKP) N/A Dimethyl Phthalate 36.00% 0.014
2773 Slocum Adhesive(M-341) N/A No reportable HAPs 0.00% 0.000
2817 Gray Sand Primer(707-007X) N/A--assume all emitted Ethyl Acetate 2.00% 0.020
2817 Gray Sand Primer(707-007X) N/A--assume all emitted Methyl Ethyl Ketone 11.50% 0.115
2817 Gray Sand Primer(707-007X) N/A--assume all emitted Styrene 22.10% 0.221
2854 High Solids Imron N/A--assume all emitted Ethyl Acetate 2.80% 0.028
2854 High Solids Imron N/A--assume all emitted Ethylbenzene 0.30% 0.003
2854 High Solids Imron N/A--assume all emitted Glycol Ethers 7.90% 0.079
2854 High Solids Imron N/A--assume all emitted Toluene 1.50% 0.015
2854 High Solids Imron N/A--assume all emitted Xylene(mixed isomers) 2.00% 0.020
2855 Imron Activator N/A--assume all emitted Ethylbenzene 0.30% 0.003
2855 Imron Activator N/A--assume all emitted Glycol Ethers 2.50% 0.025
2855 Imron Activator N/A--assume all emitted Methyl Ethyl Ketone 2.90% 0.029
2855 Imron Activator N/A--assume all emitted Toluene 4.80% 0.048
2855 Imron Activator N/A--assume all emitted Xylene(mixed isomers) 1.00% 0.010
Page 3 of 8

Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical (%) (%)
3035 Ampreg 22 Laminating Resin No reportable HAPs 0.00% 0.000
3525 Clear Hi-Gloss Additive(904-001X) N/A--assume all emitted Methyl Ethyl Ketone 14.20% 0.142
3525 Clear Hi-Gloss Additive(904-001X) N/A--assume all emitted Styrene 33.60% 0.336
3699 Speed Patchaid(970X900) Manual Styrene 50.12% 0.090
3895 BPO/5 Paste Catalyst N/A No reportable HAPs 0.00% 0.000
3896 K-Lite 750 Mechanical Non-Atomized Styrene 40.00% 0.047
4324 Polycor White Gelcoat(948WJ201) Gelcoat Application Styrene 40.00% 0.220
435 Marine Sealant Fast Cure 5200 N/A No reportable HAPs 0.00% 0.000
4629 Clear Coats N/A--assume all emitted Ethylbenzene 5.00% 0.050
4629 Clear Coats N/A--assume all emitted Methyl Isobutyl Ketone 20.00% 0.200
4629 Clear Coats N/A--assume all emitted Styrene 1.00% 0.010
4629 Clear Coats N/A--assume all emitted Toluene 10.00% 0.100
4629 Clear Coats N/A--assume all emitted Xylene(mixed isomers) 40.00% 0.400
4630 Reducers N/A--assume all emitted Ethylbenzene 1.00% 0.010
4630 Reducers N/A--assume all emitted Methyl Ethyl Ketone 40.00% 0.400
4630 Reducers N/A--assume all emitted n-Hexane 5.00% 0.050
4630 Reducers N/A -assume all emitted Toluene 30.00% 0.300
4630 Reducers N/A--assume all emitted Xylene(mixed isomers) 10.00% 0.100
4631 Deltron 2000 Basecoats N/A--assume all emitted 1,2,4-Tri methyl benzene 5.00% 0.050
4631 Deltron 2000 Basecoats N/A--assume all emitted 2-Butoxyethyl Acetate 5.00% 0.050
4631 Deltron 2000 Basecoats N/A--assume all emitted Ethylbenzene 5.00% 0.050
4631 Deltron 2000 Basecoats N/A--assume all emitted Methyl Ethyl Ketone 20.00% 0.200
4631 Deltron 2000 Basecoats N/A--assume all emitted Methyl Isobutyl Ketone 20.00% 0.200
Page 4of8

Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical (%) (%)
4631 Deltron 2000 Basecoats N/A--assume all emitted N-Butyl Alcohol 20.00% 0.200
4631 Deltron 2000 Basecoats N/A-assume all emitted Nickel Compounds 1.00% 0.010
4631 Deltron 2000 Basecoats N/A--assume all emitted Toluene 30.00% 0.300
4631 Deltron 2000 Basecoats N/A--assume all emitted Xylene(mixed isomers) 20.00% 0.200
4635a DCX Hardener N/A--assume all emitted Hexamethylene diisocyanate 1.00% 0.010
4635a DCX Hardener N/A--assume all emitted Isophorone Diisocyanate 1.00% 0.010
4635b DFX11 Hardener N/A--assume all emitted Isophorone Diisocyanate 5.00% 0.050
4635c Primer Surface Catalyst(K201) N/A--assume all emitted Ethyl Acetate 10.00% 0.100
4635c Primer Surface Catalyst(K201) N/A assume all emitted Hexamethylene diisocyanate 1.00% 0.010
4635c Primer Surface Catalyst(K201) N/A--assume all emitted Toluene 10.00% 0.100
4923 Laminex Fillet Manual Styrene 30.00% 0.038
519 Poly-Bond B39 Adhesive Mechanical Non-Atomized Styrene 24.40% 0.031
5212100 3M Super Duty 05955 N/A--assume all emitted 1,2,4-Trimethylbenzene 1.00% 0.010
5221010 Sikaflex 291,White N/A--assume all emitted Xylene(mixed isomers) 5.00% 0.050
5223003 Adhesive,K-Grip 201 N/A--assume all emitted Methylene Chloride 78.00% 0.780
5223010 Oatley PVC Cement N/A No reportable HAPs 0.00% 0.000
5223038 Tite Bond II Adhesive(Wood Glue) N/A No reportable HAPs 0.00% 0.000
6040 Polycor Black Gelcoat(944B025) Gelcoat Application-MMA Methyl Methacrylate 4.63% 0.038
6040 Polycor Black Gelcoat(944B025) Gelcoat Application Styrene 34.11% 0.158
647A Polyurethane Foam Part A N/A No reportable HAPs 0.00% 0.000
647B Polyurethane Foam Part B N/A No reportable HAPs 0.00% 0.000
864 Sikaflex 291,White N/A--assume all emitted Xylene(mixed isomers) 5.00% 0.050
865 Sikaflex 221,Black N/A--assume all emitted Xylene(mixed isomers) 5.00% 0.050
Page 5 of 8

1
Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical (%) (%)
8821 Kantstick Mold Cleaner N/A--assume all emitted Methyl Ethyl Ketone 50.00% 0.500
8821 Kantstick Mold Cleaner N/A--assume all emitted Toluene 50.00% 0.500
8929 AOTECH White Resin(#14 Ultra) N/A--assume all emitted Styrene 15.00% 0.150
9427 Kantstick Maxi Pull N/A No reportable HAPs 0.00% 0.000
948AA740 Polycor Tinman Gelcoat(948AA740) Gelcoat Application-MMA Methyl Methacrylate 4.28% 0.038
948AA740 Polycor Tinman Gelcoat(948AA740) Gelcoat Application Styrene 30.14% 0.134
951AA740 Armorcote Tinman Gelcoat(951AA740) Gelcoat Application-MMA Methyl Methacrylate 9.04% 0.075
951AA740 Armorcote Tinman Gelcoat(951AA740) Gelcoat Application Styrene 30.52% 0.136
951 LA855 Cobalt Gelcoat(951 LA855) Gelcoat Application-MMA Methyl Methacrylate 9.01% 0.060
951 LA855 Cobalt Gelcoat(951 LA855) Gelcoat Application Styrene 32.54% 0.145
951 RA699 Candy Apple Gelcoat(951 RA699) Gelcoat Application-MMA Methyl Methacrylate 8.06% 0.060
951 RA699 Candy Apple Gelcoat(951 RA699) Gelcoat Application Styrene 32.09% 0.143
954AH187 Light Gray Gelcoat(954AH187) Gelcoat Application-MMA Methyl Methacrylate 4.39% 0.038
954AH187 Light Gray Gelcoat(954AH187) Gelcoat Application Styrene 35.36% 0.178
9631A507 Seattle Grey Gelcoat(9631A507) Gelcoat Application-MMA Methyl Methacrylate 5.56% 0.045
9631A507 Seattle Grey Gelcoat(9631A507) Gelcoat Application Styrene 21.87% 0.097
963LA860 True Blue Gelcoat(963LA860) Gelcoat Application-MMA Methyl Methacrylate 5.38% 0.045
963LA860 True Blue Gelcoat(963LA860) Gelcoat Application Styrene 23.17% 0.103
963YK140 Canary Yellow Gelcoat(963YK140) Gelcoat Application-MMA Methyl Methacrylate 5.58% 0.045
963YK140 Canary Yellow Gelcoat(963YK140) Gelcoat Application Styrene 22.69% 0.101
NONE1 3M Perfect It 05936 N/A No reportable HAPs 0.00% 0.000
NONE10 Mold Sealer(TR910) N/A No reportable HAPs 0.00% 0.000
NONE11 Staput Adhesive(SP4H) N/A No reportable HAPs 0.00% 0.000
Page 6 of 8

Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical (%) (%)
NONE12 Filler Bondo Manual Styrene 20.00% 0.025
NONE13 Adhesive(3M Super 77) N/A--assume all emitted n-Hexane 1.00% 0.010
NONE15 Cleaner(HPP5) N/A No reportable HAPs 0.00% 0.000
NONE17 Armornex Base White Gelcoat(953WJ301) Gelcoat Application-MMA Methyl Methacrylate 5.00% 0.038
NONE17 Armornex Base White Gelcoat(953WJ301) Gelcoat Application Styrene 29.06% 0.129
NONE18 Lupersol DDM-9 N/A Dimethyl Phthalate 32.00% 0.013
NONE18 Lupersol DDM-9 N/A--assume all emitted Methyl Ethyl Ketone 2.00% 0.020
NONE19 Orange Hi Gloss(608-021) N/A--assume all emitted Methyl Ethyl Ketone 6.40% 0.064
NONE19 Orange Hi Gloss(608-021) N/A--assume all emitted Styrene 31.40% 0.314
NONE19 Orange Hi Gloss(608-021) N/A--assume all emitted Xylene(mixed isomers) 0.20% 0.002
NONE2 3M Imperial 06044 N/A No reportable HAPs 0.00% 0.000
NONE20 Arjay Putty Mechanical Non-Atomized Styrene 30.00% 0.032
NONE21 Styrene Monomer N/A--assume all emitted Styrene 100.00% 1.000
NONE22 Aqua Blue 200 N/A No reportable HAPs 0.00% 0.000
NONE3 Wax Paste JR 102&104) N/A No reportable HAPs 0.00% 0.000
NONE4 Glaze Sealer JR 301) N/A--assume all emitted Formaldehyde 0.50% 0.005
NONE5 Wax Honey(P5401520) N/A No reportable HAPs 0.00% 0.000
NONE6 Mold Release(TR210) N/A--assume all emitted Cumene 2.80% 0.028
NONE6 Mold Release(TR210) N/A--assume all emitted Toluene 80.00% 0.800
NONE6 Mold Release(TR210) N/A--assume all emitted Xylene(mixed isomers) 3.50% 0.035
NONE7 Mold Release(TR216) N/A--assume all emitted 1,2,4-Trimethylbenzene 20.30% 0.203
NONE7 Mold Release(TR216) N/A--assume all emitted Cumene 2.80% 0.028
NONE7 Mold Release(TR216) N/A--assume all emitted Toluene 40.00% 0.400
Page 7 of 8

Fountain Powerboats Washington Plant Emission Factor Documentation
Weight% E-Factor
Product Number Product Name UEF Row Chemical (%) (%)
NONE7 Mold Release(TR216) N/A--assume all emitted Xylene(mixed isomers) 3.50% 0.035
NONE8 Mold Release(TR900) N/A No reportable HAPs 0.00% 0.000
NONE9 Mold Cleaner(TR905) N/A--assume all emitted Methyl Ethyl Ketone 50.00% 0.500
NONE9 Mold Cleaner(TR905) N/A--assume all emitted Toluene 50.00% 0.500
Page 8 of 8

Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2004
1037 Usage(gal). 1,881.21 VOC Content(wYYo): 0.445 VOCs(ibs): 884.5
Resin(Corve 8153) Usage(lbs): 16,379.8 HAP Content(wt%): 0.445 HAPs(lbs): 884.5
Density(Ib/gal): 8.71
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
100-42-5 Styrene 44.50% 0.054 884.5
1328 Usage(gal): 381.01 VOC Content(wt%): 0.300 VOCs(lbs): 112.2
Arjay 1201 Putty Usage(lbs): 3,495.3 HAP Content(wt%): 0.300 HAPs(lbs): 112.2
Density(Ib/gal): 9.17
CAS No Chemical Weight% E-Factor HAPiTAP Lbs
100-42-5 Styrene 30.00% 0.032 112.2
---
13292 Usage(gal): 445.0 VOC Content(wt%): 0.940 VOCs(lbs): 379.2
IPS Adhesive Activator Usage(lbs): 4,034.2 HAP Content(wt%): 0.800 HAPs(lbs): 322.7
Density(lb/gal): 9.07
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
84-74-2 Dibutyl Phthalate 80.00% 0.080 322.7
13293 Usage(gal): 2,733.0 VOG Content 0.700 VOCs(lbs): 4,004.3
IPS Adhesive Usage(lbs): 21,881.5 HAP Content(wt%): 0.650 HAPs(lbs): 2,910.2
Density(Ib/gal): 8.01
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 65.00% 0.133 2,910.2
13375 Usage(gal): 9.0 VOC Content(wM 0.005 VOCs(lbs): 0.5
Pro-Set 125 Resin Usage(lbs): 88.0 HAP Content(wt%). 0.000 IAAPs(lbs): 0.0
Density(lb/gal): 9.51
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
13376 Usage(gal): 1,285.8 VOC Content(wt%) 0.006 VOCs(lbs): 64.3
Pro-Set 229 Resin Hardener Usage(lbs): 10,412.9 HAP Content(wt%). 0.000 HAPs(lbs): 0.0
Density(lb/gal): 8.10
CAS No Chemical Weight% E-Factor HAPITAP Lbs
No reportable HAPs 0.00% 0.000 0.0
1343 Usage(gal): 215.0 VOC Content(wt°,,'t 0.338 VOCs(lbs): 387.0
Armorflex Fountain White Gel Usage(lbs): 2,333.0 HAP Content(wt '. 0.339 HAPs(lbs): 387.0
(953WJ728) Density(lb/gall: 10.85
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 5.00% 0.038 87.5
100-42-5 Styrene 28.85% 0.128 299.6
©Value Environmental 6/12/2005 Page 1 of 14

Fountain Powerboats Washington Plant: Usage and VOC&HAP Emissions Year Ending: December 2004
13439 usage tgat, 0.3 vQ�, 0.998 _ 2.2
Imron Accelrator Usage(lbs): 2.2 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 8.12
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
13512 Usage(gal): 37.2 VOC Content(wt%): 0.813 VOCs(lbs): 222.0
Cherry Wood Stain Usage(lbs): 272.9 HAP Content(wt%): 0.126 HA 34.4
Density(lb/gal): 7.34
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
100-41-4 Ethylbenzene 0.60% 0.006 1.6
N/A Glycol Ethers 8.00% 0.080 21.8
1330-20-7 Xylene(mixed isomers 4.00% 0.040 10.9
13567 Usage(gal): 111,585.8 VOC Content(wt%): 0.350 v- ,s Sibs; 74,915.3
Resin(VEX-201-958-F) Usage(lbsi_,070,219.0 HAP Content(wt%): 0.350 HAPs(lbs): 74,915.3
Density(lb/gal): 9.59
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
100-42-5 Styrene 35.00% 0.070 74,915.3
13570 b Usage(gall 58.3 VOC Content(wt%): 0.814 VOCs(lbsir 449.4
Sea Grip 5000 Usage(Ibs 552.0 HAP Content(wt%): 0.000 HAPs(Ibs) 0.0
Density(lb/gal): 9.47
CAS No Chemical weiW-° E-Factor HAP/TAP Lbs
No reportable HAPs 0,00% 0.000 0.0
13665 Usage(gat. 15,203.5 VOC Content(wt", 0.277 VOCs(Ibsi 26,125.3
Gelcoat(963WJ825) Usage(Ibs) 170,542.0 HAP Content(wt°V, 0.277 HAPs(Ibsj. 26.127.0
Density(lb/gai; 11.22
CAS No Chemical Weight% E-Factor HAPTAP Lbs
80-62-6 Methyl Methacrylate 8.46% 0.068 11,511.6
100-42-5 Styrene 19.26% 0.086 14,615.4
13706 Usage(gal): 241.5 OC Content(wt%): 0.115 VOCs(Ibs): 339.3
AWLGARD Interior White Paint Usage(lbs): 2,958.4 HAP Content(wV/, 0.020 HAPs(lbs): 59.2
(WT8202) Density(lb/ga 12.25
CAS No Chemical Weight% E-Facto HAP/TAP Lbs
N/A Glycol Ethers 2.00% 0.020 59.2
13706-ACT Usage(gal): 80.5 VOC Content(wt%): 0.094 VOCs(lbs): 70.2
AWLGARD Converter(WT3201) Usage(Ibs): 749.6 HAP Content(wt%): 0.000 HAPs(Ibs) 0.0
Density(lb/gal): 9.31
CAS No Chemical Weight% E-Factor HAPITAP Lbs
No reportable HAPs 0.00% 0.000 0.0
©Value Environmental 6/12/2005 Page 2 of 14

Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2004
13794 Usage(gal): 491.1 VOC Content(wt°i%): 0.775 VOCs(Ibs): 2,302.2
3M Foam Fast 74 Cylinder Usage(Ibs): 2,969.6 HAP Content(wt%): 0.000 1 HAPs(Ibs): 0.0
Psray Adhesive Density(lbigal): 6.05
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
13864 Usage(gal): 0.9 VOC Content(wt%): 0.504 VOCs(Ibs): 4.0
Adhesive Integra Usage(Ibs): 7.9 HAP Content(wt%): 0.504 HAPs(Ihs): 4.0
Density(lb/gal): 8.88
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
84-74-2 Dibutyl Phthalate 0.36% 0.004 0.0
80-62-6 Methyl Methacrylate 50.02% 0.500 3.9
- ................................
1446 Usage(gal): 82.3 VOC Content(wt,o. 0.394 VOCs(Ibs): 151.4
Armorcoate Yellow Gelcoat Usage(lbs): 789.0 HAP Content(wt%): 0.402 HAPs(Ibs): 157.4
(951YA596) Density(lbigal): 9.59
CAS No Chemical Weight% E-Factor HAPITAP Lbs
80-62-6 Methyl Methacrylate 8.80% 0.060 47.3
100-42-5 Styrene 31.35% 0.140 110.1
1447 Usage(gal): 15.2 VOC Content(wt%): 0.350 VOCs(lbs): 27.4
Prowler Yellow Gelcoat Usage(Ibs): 157.01 HAP Content(wt%): 0.350 HAPs(lbs): 27.4
(948YA596) Density(lb/gal): 10.36
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 4.27% 0.038 5.9
100-42-5 Styrene 30.77% 0.137 21.5
1500007 Usage(gal): 11.1 VOC Content(wt%): 1.000 VOCs(lbs): 78.4
Dykem Blue 80600 Usage(lbs): 78.41 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Density(lb/gal): 7.09
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
1500009 Usage(gal): 153.0 VOC Content(wt%): 0.356 VOCs(lbs): 590.5
Gray Sand Primer(707-007X) Usage(Ibs): 1,658.81 HAP Content(wt%): 0.336 1 HAPs(lbs): 557.4
Density(lbigal): 10.84
GAS No Chemical Weight% E-Factor HAP/TAP Lb
78-93-3 Methyl Ethyl Ketone 11.50% 0.115 190.8
100-42-5 Styrene 22.10% 0.221 366.6
1500110 Usage(gal): 1,781.61 VOC Content(wt%): 0.360 VOCs(lbs): 229.4
Hi Point 90 Red(MEKP) Usage(lbs): 15,928.0 HAP Content(wt%): 0.360 HAPs(lbs): 229.4
Density(lb/gal): 8.94
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
131-11-3 Dimethyl Phthalate 36.00% 0.014 229.4
©Value Environmental 6/12/2005 Page 3 of 14

Fountain Powerboats Washington Plant: Usage and VOC& HAP Emissions Year Ending: December 2004
1500230 Usage(gat;- 81.4 v0u i;o€wia(wi'/,;. 0.468 213.1
Black Tooling Gelcoat(94513201) Usage(lbs): 739.9 HAP Content(wt%): 0.468 HAPs flbsl: 213.1
Density(lb/gal): 9.09
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 4.37% 0.038 27.7
100-42-5 Styrene 42.40% 0.251 185.3
1500230m Usage(gat): 94.1 VOC Content(wt°5, 0.388 PCs(lbs): 176.4
Black Tooling Gelcoat Usage(Ibs): 855.4 HAP Content(wt%, 0.388 HAPs(Ibs): 176.4
(965BJ115) Density(lb/gal): 9.09
GAS No Chemical Weight% E-Factor HAP7/:0 Lhs
67-56-1 Methyl Alcohol 0.72% 0.007 6.2
100-42-5 Styrene 38.07% 0.199 170.2
1500500 Usage(gag; 3,294.0 VOC Content(wt%): 0.316 VOCs(lbs): 668.6
Core-Bond 870 Adhesive Usage(lbs): 19,779.8 HAP Content(wt%): 0.316 HAPs{Ibs): 668.6
Density(lb/gal): 6.00
CAS No Chemical Weight% HAPITAP Lbs
100-42-5 Styrene 31.60% 0.034 668.6
1500600 Usage(gal). 999.7 VOC Content(wt%): 0.000 VOCs(lbs) 0.0
Foam(Elastopor P15390R) Usage(lbs): 9,057.0 HAP Content(wt%): 0.000 HAPs(Ibs) 0.0
Density(lb/gal): 9.06
CAS No Chemical Weight% E-Fa HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
1500605 Usage(gal): 886.2 VOC Content(wt%): 0.000 VOCs(Ibs) 0.0
Foam(Elastopor P1001 U) Usage(Ibs): 9,057.0 HAP Content(wt%): 0.000 HAPs(ibs): 0.0
Density(lb/gal): 10.22
CAS No Chemical Weight% E-Factor HAPITAP Lbs
No reportable HAPs 0.00% 0.000 0.0
1575 Usage(gal): 50.0 VOC Content(wt%): 0.921 VOCs(lbs): 79.0
Polycor 8%Wax Solution Usage(Ibs'': 374.8 HAP Content(wt%): 0.920 HAPs(lbs): 78.8
(970C949) Density(Ib/gal): 7.50
CAS No Chemica Weight% E-Factor HAP/TAP Lbs
100-42-5 Styrene 92.00% 0.210 78.8
1675 Usage(gall 39.6 VOC Content(wt%): 0.638 VOCs(Ibs): 210.4
3M Finesse It#05928 Usage(lbsi 329.8 HAP Content(wt%): 0.000 HAPs(Ibs) 0.0
Density(Ib/gal): 8.34
CAS No Chemical Weight% E-Factor HAPITAP Lb,,
No reportable HAPs 0.00% 0.000 0.0
©Value Environmental 6/12/2005 Page 4 of 14

Fountain Powerboats Washington Plant: Usage and VOC& HAP Emissions Year Ending: December 2004
1700 Usage(ga;, 85.1 VOc Gontent 0.574 vu s tw-,. 81.4
Patchaid(970XJ037) UFaae{It e' 730.6 HAP Content(wt%): 0.575 HAPs(Ilas� 81.4
Density(Ib/gal): 8.58
CAS No Chemic& Weight% E-Factor HAP/TAP Lbs
100-42-5 Styrene 57.45% 0.111 81.4
1700a Usage(gal): 80.8 VOC Content(wt%): 0.358 VOCs(lbs): 356.2
Sealer Usage(lbs): 995.7 HAP Content(wt%): 0.000 HAPs(Ibs): 0.0
Density(lb/gal): 12.32
CAS No Chemical Weight% E-Factor HAPiTAP Lbs
No reportable HAPs 0.00% 0.000 0.0
2055 Usage(gal): 63.4 VOC Content(wt%): 0.690 VOCs(Ibs): 394.6
Polyurethanes(Concept Acrylic) Usage(lbs): 571.9 HAP Content(wt%): 0.360 HAPs(lbs) 205.9
Density(lb/gal): 9.02
GAS Chemical Weight% E-Factor HADfTAP Lh-,
100-41-4 Ethylbenzene 5.00% 0.050 28.6
100-42-5 Styrene 1.00% 0.010 5.7
1330-20-7 Xylene(mixed isomers 30.00% 0.300 171.6
2378 Usage(gal): 0.5 VOC Content(wt%): 0.400 VOCs(lbs): 1.9
Corian Joint Adhesive Usage(lbs): 4.71 HAP Content(wt%): 0.400 1 HAPs(lbs): 1.9
Density(Ib/gal): 10.17
CAS No Chemical Weight% E-Factor HAPiTAP Lbs
80-62-6 Methyl Methacrylate 40.00% 0.400 1.9
2378a Usage(gal): 28.0 VOC Content(wt%): 0.376 VOCs(lbs). 93.0
Orange VE Tooling(1908-045) Usage(lbs): 247.5 HAP Content(wt%): 0.373 HAPs(lbs): 92.3
Density(lb/gal): 8.84
CAS No Chemical Weight% E-Factor HAP/TAP Lh-
100-42-5 Styrene 37.30% 0.373 92.3
2379 Usage tvo. 0.31 VOC Content(wt%): 0.000 VOCs(lbs): 0.0
Corian Joint Adhesive Usage(lbs): 2.31 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 8.71
CAS No Chemical Weight% E-Factor HAPITAP Lbs
No reportable HAPs 0.00% 0.000 0.0
2476 Usage(gal): 525.7 VOC Content(wt%): 0.360 VOCs(Ibs): 67.7
Hi Point 90 Clear(MEKP) Usage(lbs): 4,700.0 HAP Content(wt%): 0.360 HAPs(lbs; 67.7
Density(lb/gal): 8.94
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
131-11-3 Dimethyl Phthalate 36.00% 0.014 67.7
©Value Environmental 6/12/2005 Page 5 of 14

Fountain Powerboats Washington Plant: Usage and VOC& HAP Emissions Year Ending: December 2004
2773 usage tyai): 537.0 1 y: 0.100 391.4
Slocum Adhesive(M-341) Usage(lbs): 3,914.3 HAP Content(wt%): 0.000 0.0
Density(lb/gal): 7.29
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
2817 Usage(gal): 260.8 VOC Content(wt%): 0.356 VOCs(lbs` 1,006.6
Gray Sand Primer(707-007X) Usage(lbs): 2,827.E ;P rat%): 0.336 950.1
Dersrty{Ib/gal): 10.84
CAS No Chemical weight'}`o E-Factor HAP/T>-
78-93-3 Methyl Ethyl Ketone 11.50% 0.115 325.2
100-42-5 Styrene 22.10% 0.221 624.9
2854 Usage jyatj: 14.9 vu(;Content(wt a): 0.286 VO(;s(lbs)' 49.3
High Solids Imron Usage(lbs): 172.1 HAP Content(wt%): 0,117 HAPs{Ib i 20.1
Density(Iblgal): 11.53
CAS No Chemical Weight'; E-Factor HAPITAP Lbs
100-41-4 Ethylbenzene 0.30% 0.003 0.5
N/A Glycol Ethers 7.90% 0.079 13.6
108-88-3 Toluene 1.50% 0.015 2.6
1330-20-7 Xylene(mixed isomers 2.00% 0.020 3.4
2855 Usage(gal): 8.8 VOC Content(wt'o): 0.468 VOCs(Ibs . 33.2
Imron Activator Usage(lbs): 71.1 HAP Content(wtI/` 0.115 HAPs(lbs): 8.2
Density(lb/go ; 8.12
GAS No Ghe13-oval Weight% E-Factor HAPJAP Lbs
100-41-4 Ethylbenzene 0.30% 0.003 0.2
N/A Glycol Ethers 2.50% 0.025 1.8
78-93-3 Methyl Ethyl Ketone 2.90% 0.029 2.1
108-88-3 Toluene 4.80% 0.048 3.4
1330-20-7 Xylene(mixed isomers 1.00% 0.010 0.7
3035 Usage(gal): 0.6 ry C Wean€ 1.000 5.9
Ampreg 22 Laminating Resin Usage(lbs): 5.9 AP Content(�_' 0.000 F --0.0
Density(ih,'grs 9.59
CAS No Chemical Wsinht 1, actor
No reportable HAPs Mo% 0.000 0.0
3525 Usage(gah 28.0 VOC Content(wt°'o): 0.478 )Cs 113.9
Clear Hi-Gloss Additive(904- Usage(Ibs; E238.2 AP Content(wt%): 0.478 ;Ps 113.9
001X) Density(lb/gal): 8.51
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
78-93-3 Methyl Ethyl Ketone 14.20% 0.142 33.8
100-42-5 Styrene 33.60% 0.336 80.0
©Value Environmental 6/12/2005 Page 6 of 14

Fountain Powerboats Washington Plant: Usage and VOC&HAP Emissions Year Ending: December 2004
3699 y�iya!, 35.1 ..or.t ,i,.,-j. 0.501 27.9
Speed Patchaid (970X900) Usage(lbs). 310.3 HAP Content(wt%): 0.501 HAPs(lbs): 27.9
Density(Ib/gal): 8.83
CAS No Chemical Weight% E-Factor HAPJAP Lbs
100-42-5 Styrene 50.12% 0.090 27.9
3895 Usage(gal): 294.0 VOC Content(wt%): 0.200 VOCs(lbs): 568.9
BPO/5 Paste Catalyst Usage(lbs). 2,844.3 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(Ib/gal): 9.67
CAS No Chemical Weight% E-Facto HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
3896 Usage F; 27,095.0 VOC Content(wt%): 0.400 VOCs(Ibs): 6,304.6
K-Lite 750 Usage(iot, 135,583.4 HAP Content(wt%): 0.400 HAPs(lbs): 6,304.6
Density(Ib/cal): 5.00
CAS No CP^.,; Weight% F-Factor HAP(TAP Lbs
100-42-5 Styrene 40.00% 0.047 6,304.6
4324 Usage{ _csj: 818.3 VOC Content(vrr,,). 0.400 VOCs(Ibs): 1,884.4
Polycor White Gelcoat Usage(lbs): 8,585.0 HAP Content(wt%): 0.400 HAPs(lbs"= 1,884.4
(948WJ201) Density(lb/gal): 10.49
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
100-42-5 Styrene 40.00% 0.220 1,884.4
435 Usage(gal): 41.8 VOC Content(wt%): 0.020 VOCs(lbs) 9.3
Marine Sealant Fast Cure 5200 Usage(lbs): 463.8 HAP Content(wt%): 0.000 HAPs(Ibss 0.0
Density(Ib/gal): 11.09
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
4629 Usage(gal): 204.3 VOC Content(wt%): 0.508 Cs(Ibs'; 824.7
Clear Coats Usage(lbs): 1,624.0 HAP Content(wt%): 0.760 HAPs(lbs: 1,234.3
Density(lb/gal): 7.95
Chemical Weioht% E-Factor HAP/TAP Lbs
100-41-4 Ethylbenzene 5.00% 0.050 81.2
108-10-1 Methyl Isobutyl Ketone 20.00% 0.200 324.8
100-42-5 Styrene 1.00% 0.010 16.2
108-88-3 Toluene 10.00% 0.100 162.4
1330-20-7 Xylene(mixed isomers 40.00% 0.400 649.6
©Value Environmental 6/12/2005 Page 7 of 14

Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2004
4630 yi k�3ai, 194.7 VGu 4,tmteot{wt:<; 1.000 1,346.1
Reducers Usage(Ibs): 1,346.1 HAP Content(wt%). 0.860 HAPs{lbs): 1,157.7
Density(Iblgal' 6.91
CAS No neaaical Weight% -Facto" HAPITAP Lbs
100-41-4 Ethylbenzene 1.00% 0.010 13.5
78-93-3 Methyl Ethyl Ketone 40.00% 0.400 538.4
110-54-3 n-Hexane 5.00% 0.050 67.3
108-88-3 Toluene 30.00% 0.300 403.8
1330-20-7 Xylene(mixed isomers 10.00% 0.100 134.6
4631 Usage(9,; 141.4 iOC Content(wt%) 0.860 VOCs(lbs): 1,034.4
Deltron 2000 Basecoats Usage(lbs): 1,202.8 HAP Content(wt°lo). 0.960 HAP,(lbs) 1,154.7
Density(Ib/gal) 8.51
CAS INn Chemical Weight% E-Fac': HAPITAP Lbs
100-41-4 Ethylbenzene 5.00% 0.050 60.1
78-93-3 Methyl Ethyl Ketone 20.00% 0.200 240.6
108-10-1 Methyl Isobutyl Ketone 20.00% 0.200 240.6
N/A Nickel Compounds 1.00% 0.010 12.0
108-88-3 Toluene 30.00% 0.300 360.8
1330-20-7 Xylene(mixed isomers 20.00% 0.200 240.6
4635a Usage(gal): 14.2 VOC Content(wt%/, 0.161 VOCs(lbs): 20.5
DCX Hardener Usage(lbs): 127.3 HAP Content(wtW 0.010 HAPs(Ibs) 1.3
Density(lb/gal'; 8.96
CAS No Chemical �104eight% E-Facto: iiAPj TAP Lbs
822-06-0 Hexamethylene diisoc 1.00% 0.010 1.3
4635c Usage(gal): 16.2 ")C Content(wt44.` 0.583 VOCs(lbs): 76.8
Primer Surface Catalyst(K201) Usage(Ibs): 131.7 HAP Content(-V& 0.110 HAPs(lbs): 14.5
Density(lb/gal): 8.15
CAS No Chemical Weight% E-Factor HAPITAP!bs
822-06-0 Hexamethylene diisoc 1.00% 0.010 1.3
108-88-3 Toluene 10.00% 0.100 13.2
4923 t, 1): 163.0 VOC Content(wt%}: 0.300 51.4
Laminex Fillet 1,359.4 HAP Content(wt% : 0.300 51.4
Density(Ib/gal; 8.34
GAS No aaica'i Weight% E-Factor HAP/TAP Lbs
100-42-5 Styrene 30.00% 0.038 51.4
519 Usage(gal): 1,756.0 VOC Content(wt%): 0.244 VOCs(lbs): 494.6
Poly-Bond B39 Adhesive Ussr,@(lb@`=.' 16,109.5 HAP Content(wt%) 0.244 HAPs(lbs). 494.6
Density(lb/gal): 9.17
CAS N w Chemical Weight% E-Factor HAP/TAP Lbs
100-42-5 Styrene 24.40% 0.031 494.6
©Value Environmental 6/12/2005 Page 8 of 14

Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2004
5221010 9.1 alvi, I I'W€ „j: 0.082 = ., 7.4
Sikaflex 291,White Usage(lbs): 90.5 HAP Content(wt%): 0.050 HAPs(lbs): 4.5
Density(lb/gal): 9.92
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
1330-20-7 Xylene(mixed isomers 5.00% 0.050 4.5
5223003 Usage(gal): 501.01 VOC Content(wt%): 0.780 VOCs(lbs): 4,073.9
Adhesive,K-Grip 201 Usage(Ibs): 5,222.9 HAP Content(wt%): 0.780 HAPs(Ibs): 4,073.9
Density(Ib/gal): 10.43
CAS No Chemical Weight% E-Factor HAPITAP Lbs
75-09-2 Methylene Chloride 78.00% 0.780 4,073.9
5223010 Usage(gal): 3.0 VOC Content(wt%): 0.860 VOCs(lbs): 20.2
Oatley PVC Cement Usage(lbs): 23.5 HAP C- -, 0.000 HAPs(Ibs): 0.0
D 7.84
Chemical Weight% E-Factor HAP;'TAP I,bs
No reportable HAPs 0.00% 0.000 0.0
5223038 Usage(gat): 285.0 VOC Content(wt%): 0.012 VOCs(Ibs): 31.3
Tite Bond II Adhesive(Wood Usage(Ibsj, 2,593.5 HAP Content(wt%): 0.000 HAPs(lbs) 0.0
Glue) Density(Ib/gal): 9.10
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
6040 Usage(gal) 1,769.E VOC Content(wt°t°): 0.387 bs): 3,493.5
Polycor Black Gelcoat(944B025) Usage(I` 17,917.0 HAP Content(wt%): 0.387 HAPs(Ibsi: 3,493.8
Density(Ib/gal): 10.12
CAS No Chemical E-F.,, HAP/TAP Lbs
80-62-6 Methyl Methacrylate 4.63% 0.038 671.9
100-42-5 Styrene 34.11% 0.158 2,821.9
647A Usage(gal): 1,018.2 VOC Content{vat;-3): 0.000 VOCs(lbs): 0.o
Polyurethane Foam Part A t.f aqn Obs'3 10,529.7 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(Ibtgal): 10.34
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
647E Usage(gall- 97.7 content(wt%): 0.000 VOCs(lbs): 0.0
Polyurethane Foam Part B Use:. 978.2 HAP Content(wt°t) 0.000 HAPs(lbs): 0.0
Density(Ibigal): 10.01
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
©Value Environmental 6/12/2005 Page 9 of 14

Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2004
864 _,: ,_ 126.6 0.082 102.5
Sikaflex 291,White two,(lh� 1,256.0 HAP Content(wt°'): 0.050 HAPs Obsl 62.8
Density(Ibigal): 9.92
CAS No Chemical Weight% E-Facto=, HAP/TAP Lbs
1330-20-7 Xylene(mixed isomers 5.00% 0.050 62.8
865 Usage(c;_-; 38.9 VOC Content(wt°%, 0.050 VOCs(lbs); 20.6
Sikaflex 221,Black Usage(lbs): 412.2 HAP Content(wt%): 0.050 HAPs(lbs): 20.6
Density(lb/gal): 10.59
CAS No Chemical Weight% E-Factor HAP1T;'
1330-20-7 Xylene(mixed isomers 5.00% 0.050 20.6
8821 Usage(gal): 34.0 VOC Content(wt%): 1.000 CCs(Ibs): 272.0
Kantstick Mold Cleaner Usage(lbs): 272.0 HAP Content(wt%): 1.000 HAPs(lbs): 272.0
Density(lb/gal): 8.00
Chemical Weight% E-Factor HAPJAP Lbs
78-93-3 Methyl Ethyl Ketone 50.00% 0.500 136.0
108-88-3 Toluene 50.00% 0.500 136.0
8929 Usage(gal' 6.0 VOC Content(wt%): 0.150 VOCs(lbs): 12.8
AOTECH White Resin(#14 Usage('':: . 85.6 HAP Content(wt%): 0.150 HAPs(lbs): 12.8
Ultra) Density(Iblgal): 14.26
CAS No Chemical Weight% E-Facto HAP/TAP Lbs
100-42-5 Styrene 15.00% 0.150 12.8
9427 Usage(gal): 432.0 1.000 2,648.1
Kantstick Maxi Pull Usage(Ibs): 2,648.1 HAP Content(wt-- 0.000 HAPs(Ibs, 0.0
Density(lb/gal): 6.13
CAS No Chemica Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
948AA740 Usage(gal): 9.4 VOC Content(wt%). 0.344 VOCs(Ib-, 17.2
Polycor Tinman Gelcoat Usage(lbs): 100.0 HAP Content(wt%): 0.344 I!APs(Ibs): 17.2
(948AA740) Density(Iblgal): 10.65
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 4.28% 0.038 3.8
100-42-5 Styrene 30.14% 0.134 13A
951AA740 Usage(gal): 50.0 VOC Content(wt%): 0.396 VOCs(lbs): 103.3
Armorcote Tinman Gelcoat Usage(Ibs): 490.0 HAP Content(wt%): 0.396 HAPs(lbs): 103.3
(951 AA740) Density(lb/gal): 9.81
CAS No Chemical Weight% E-Factc, HAP/TAP Lbs
80-62-6 Methyl Methacrylate 9.04% 0.075 36.7
100-42-5 Styrene 30.52% 0.136 66.5
©Value Environmental 6/12/2005 Page 10 of 14

Fountain Powerboats Washington Plant:Usage and VOC& HAP Emissions Year Ending: December 2004
951LA855 usage(gai): 50.0 v , i uiaui;i 0.415 96.2
Cobalt Gelcoat(951 LA855) Usage(Ibs): 470.01 HAP Content(wt%): 0.416 HAPs(lbs): 96.3
Density(lb/gal): 9.41
Chemical Weight% E-Factor HAPITAP Lbs
80-62-6 Methyl Methacrylate 9.01% 0.060 28.2
100-42-5 Styrene 32.54% 0.145 68.1
951 RA699 Usage(gal): 14.0 VOC Content(wt%): 0.402 VOCs fl 26.8
Candy Apple Gelcoat Usa�� 132.0 HAP Content(wt%): 0.402 HAPs(lbs): 26.8
(951 RA699) Density(lb/gal): 9.44
CAS No Chemical Weight'% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 8.06% 0.060 7.9
100-42-5 Styrene 32.09% 0.143 18.8
954AH187 Usage(gal): 14.8 VOC Content(wt%): 0.398 VOCs(lbs): 32.3
Light Gray Gelcoat(954AH187) Usage(Ibs) 150.0 HAP Content(wt%): 0.398 HAPs(Ibs): 32.3
Density(lb/gal): 10.13
CAS No Chemical Weight F HAPITAP Lbs
80-62-6 Methyl Methacrylate 4.39% 0.038 5.6
100-42-5 Styrene 35.36% 0.178 26.7
9631A507 Usage(galj. 15.1 VOC Content(wt%): 0.274 V'OCs(lbs). 24.0
Seattle Grey Gelcoat(9631A507) Usage(Ibs): 169.0 HAP Content(wt%): 0.274 HAPs(Ibs): 24.0
Density(Ib/gal): 11.19
CAS No Chemic. Weight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 5.56% 0.045 7.6
100-42-5 Styrene 21.87% 0.097 16.4
963LA860 Usage(gal): 8.8 VOC Content(wt°/ 0.285 VOCs(Ibs): 13.9
True Blue Gelcoat(963LA860) Usage(lbs): 94.0 HAP Content(wt°/.'; 0.286 HAPs(Ibs): 13.9
Density(Iblga! 10.66
CAS No Chemical Weight% HAP/TAP Lbs
80-62-6 Methyl Methacrylate 5.38% 0.045 4.2
100-42-5 Styrene 23.17% 0.103 9.7
963YK140 Usage(gal): 13.6 VOC Content(wt,, 0.283 VOCs(lbs): 21.2
Canary Yellow Gelcoat Usage(lbs): 145.0 HAP Content(wt°/ 0.283 1-11APs(lbs): 21.2
(963YK140) Density(Ib/gai; 10.66
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 5.58% 0.045 6.5
100-42-5 Styrene 22.69% 0.101 14.6
NONE1 Usage(gal): 169.0 VOC Content(wt%): 0.433 VOCs(Ibs): 621.9
3M Perfect It 05936 Usage(Ibs): 1,437.6 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 8.51
Chemical Weight% E-Factc HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
©Value Environmental 6/12/2005 Page 11 of 14

i Year Fountain Powerboats Washington Plant:Usage and VOC 8:HAP Emissions Ye Ending: December 2004
NONE10 Us«g-_ 16.0 0.945 110.4
Mold Sealer(TR910) Usage : 116.8 HAP Content(wt%): 0.000 HAPs(ibs' 0.0
Density(lb/gal): 7.30
Chemical Weight% E-Factor HAPITAP Lbs
No reportable HAPs 0.00% 0.000 0.0
NONE11 Usage(gal): 273.8 VOC Content(wt" 0.672 VOCs(lbs). 1,437.3
Staput Adhesive(SP4H) Usage(lbs): 2,139.4 HAP Content( 0.000 HAPs(lbs) 0.0
Density(lbigal): 7.81
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
NONE12 Usage(gal) 165.3 VOC Content(wt%): 0.200 VOCs(lbs : 40.0
Filler Bondo Usage(lbs). 1,585.4 HAP Content(wt%l- 0.200 HAPs(lbs) 40.0
Density(lb/gal): 9.59
CAS No Chemical Weight% E-Factor HAPRAP Lbs
100-42-5 Styrene 20.00% 0.025 40.0
NONE13 Usag;�(gait: 25.21 VOC Content(wt°/. 0.750 :)Cs(lbs). 110.0
Adhesive(3M Super 77) Usage(lbs): 146.6 HAP Content(wt% . 0.010 Ps(Ibs): 1.5
Density(lb/gal): 5.81
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
110-54-3 n-Hexane 1.00% 0.010 1.5
NONE15 Usage(gal): 1,457.5 VOC Content(wt%): 0.175 VOCs(Ibs; 2,169.8
Cleaner(HPP5) Usage(lbs) 12,398.7 HAP Content(wt%). 0.000 °.Ps(lbs): 0.0
Density(lb/gal): 8.51
CAS No Chemical Weight% E-Factor HAPIT
No reportable HAPs 0.00% 0.000 0.0
NONE17 Usage(gal): 22.4 VOC Content(wt%): 0.341 VOCs(lbs): 40.1
Armorflex Base White Gelcoat Usage(lbs): 240.3 HAP Content(wt%): 0.341 HAPs(lbs): 40.1
(953WJ301) Density(lb/gal): 10.75
Chemical Weight% E-Factor HAP/TAP Lbs
80-62-6 Methyl Methacrylate 5.00% 0.038 9.0
100-42-5 Styrene 29.06% 0.129 31.1
NONE18 Usage(gal): 3.6 VOC Content(wt%): 0.340 VOCs(lbs): 1.1
Lupersol DDM-9 Usage(lbs). 32.7 HAP Content(wt%): 0.340 HAPs(lbs): 1.1
Density(lb/gal): 9.04
CAS No Chemical Weight% HAP/TA-,
131-11-3 Dimethyl Phthalate 32.00% 0.013 0.4
78-93-3 Methyl Ethyl Ketone 2.00% 0.020 0.7
©Value Environmental 6/12/2005 Page 12 of 14

Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2004
NONE19 sage tgaa,: 12.0 v;s a kWL/<>3: 0.380 d:1uv 1. ,1 40.7
Orange Hi Gloss(608-021) Usage(Ibsi: 107.1 9AP Content(wt%): 0.380 HAPs(Ibs): 40.7
Density(Iblgal): 8.92
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
78-93-3 Methyl Ethyl Ketone 6.40% 0.064 6.9
100-42-5 Styrene 31.40% 0.314 33.6
1330-20-7 Xylene(mixed isomers 0.20% 0.002 0.2
NONE2 Usage(gal). 328.6 VOC Content(wt%): 0.660 VOCs(lbs): 2,280.5
3M Imperial 06044 Usage(lbs): 3,453.1 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 10.51
CAS No Chemical Weight% E-Factor HAP.fTAP Lbs
No reportable HAPs 0.00% 0.000 0.0
NONE20 Usage(gal): 125.0 VOC Content(wt%): 0.300 VOCs(lbs): 36.8
Arjay Putty Usage(lbs): 1,146.8 iAP Content(wt`7o): 0.300 HAPs(Ibsj: 36.8
Density(lb/gal): 9.17
CAS No Chemical Weight% E-Factor HAPTTAP Lbs
100-42-5 Styrene 30.00% 0.032 36.8
NONE21 Usage(gal): 5.6 VOC Content(wt%): 1.000 VOCs(Ibs): 42.0
Styrene Monomer Usage(lbs): 42.0 HAP Content(wt%): 1.000 HAPs(lbs): 42.0
Density(Iblgal): 7.51
Chemical W-ight% E-Factor HAP/TAP Lbs
100-42-5 Styrene 100.00% 1.000 42.0
NONE22 Usage(gal). 106.0 V= .Content(wt%): 0.350 VOCs(lbs): 309.4
Aqua Blue 200 Usage(lbs): 884.0 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(Iblgal): 8.34
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
NONE3 Usage(gal): 6.6 VOC Content(wt%): 0.700 VOCs(Ibsj 32.5
Wax Paste JR 102& 104) Usage(Ibs): 46.4 HAP Content(wt%): 0.000 HAPs(Ibs). 0.0
Density(Iblgal): 7.00
CAS No Chemical Weight% E-Factor HAPITAP Lbs
No reportable HAPs 0.00% 0.000 0.0
NONE4 Usage(gal): 7.0 VOC Content(wt%): 0.330 VOCs(Ibs): 20.2
Glaze Sealer(TR 301) Usage(lbs): 61.3 HAP Content(wt%): 0.005 HAPs(lbs): 0.3
Density(Iblgal): 8.75
CAS No Chemical Weight% E-Factor NAP/TAP Lbs
50-00-0 Formaldehyde 0.50% 0.005 0.3
©Value Environmental 6/12/2005 Page 13 of 14

Fountain Powerboats Washington Plant:Usage and VOC&HAP Emissions Year Ending: December 2004
NONES I Usage(gal): 144.0 b`OG Cor2tent(wt's,;: 0.700 ui:s 706.4
Wax Honey(P5401520) Usage(Ibs): 1,008.8 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(Ib/gal): 7.01
CAS No Chemical Weight% E-Factof HAPITAP Lbs
No reportable HAPs 0.00% 0.000 0.0
NONE6 Usage(gal): 2.01 VOC Content(wt°f%): 0.958 VOC!;(lbs): 41.4
Mold Release(TR210) Usage(lbs): 43.2 HAP Content(wt%): 0.863 HAPs(lbs): 37.3
Density(lb/gal): 7.20
CAS No Chemical Weight% E-Factor HAP/TAP Lbs
98-82-8 Cumene 2.80% 0.028 1.2
108-88-3 Toluene 80.00% 0.800 34.6
1330-20-7 Xylene(mixed isomers 3.50% 0.035 1.5
NONE? Usage(gal): 14.0 VOC Content(wt%): 0.944 VOCs(lbs): 95.2
Mold Release(TR216) Usage(lbs): 100.81 HAP Content(wt%): 0.463 HAPs(lbs): 46.7
Density(lb/gal): 7.20
CAS No Chemical Weight% E-factor HAPfTAP Lbs
98-82-8 Cumene 2.80% 0.028 2.8
108-88-3 Toluene 40.00% 0.400 40.3
1330-20-7 Xylene(mixed isomers 3.50% 0.035 3.5
NONE8 Usage(gal): 2.0 VOC Content(wt%): 0.959 VOCs(lbs): 14.0
Mold Release(TR900) Usage(lbs): 14.6 HAP Content(wt%): 0.000 HAPs(lbs): 0.0
Density(lb/gal): 7.30
CAS No Chemical Weight% E-F" ctor HAP/TAP Lbs
No reportable HAPs 0.00% 0.000 0.0
NONE9 Usage(gal): 2.0 VOC Content(wt%): 1.000 VOCs(lbs): 14.1
Mold Cleaner(TR905) Usage(lbs): 14.1 HAP Content(wt%): 1.000 HAPs(lbs): 14.1
Density(lblgal): 7.05
CAS No Chemical Weight% E-Factor HAP/TAP
78-93-3 Methyl Ethyl Ketone 50,00% 0.500 7.1
108-88-3 Toluene 50.00% 0.500 7.1
Month(lbs) Month(tons)
VOCs: 147,106 73.55
HAPs: 130,307 65.15
©Value Environmental 6/12/2005 Page 14 of 14

Fountain Powerboats Washington Plant:Usage&Emissions Year Ending: December 2004
Emissions (lbs) Emissions (tons)
HAP?
98-82-8 Cumene 4 0.00
84-74-2 Dibutyl Phthalate 323 0.16
131-11-3 Dimethyl Phthalate 297 0.15
100-41-4 Ethylbenzene 186 0.09
50-00-0 Formaldehyde 0 0.00
N/A Glycol Ethers 96 0.05
822-06-0 Hexamethylene diisocyanate 3 0.00
67-56-1 Methyl Alcohol 6 0.00
78-93-3 Methyl Ethyl Ketone 1,481 0.74
108-10-1 Methyl Isobutyl Ketone 565 0.28
80-62-6 Methyl Methacrylate 15,378 7.69
75-09-2 Methylene Chloride 4,074 2.04
110-54-3 n-Hexane 69 0.03
N/A Nickel Compounds 12 0.01
No reportable HAPs 0 0.00
100-42-5 Styrene 105,344 52.67
108-88-3 Toluene 1,164 0.58
1330-20-7 Xylene(mixed isomers) 1,305 0.65
Subtotal 130,307 65.15
HAP? [J,
141-78-6 Ethyl Acetate 108 0.05
Subtotal 108 0.05
Total 130,415 65.21
©Value Environmental 6/12/2005 Page 1 of 1

Facility Name: Facility ID:
North Carolina Department of Environment and Natural Resources
Division of Air Quality
General Information
If any information already provided to DAO has changed or otherwise is incorrect or,please provide corrections. You may leave
blanks where the information is unchanged(except Facility ID and Name).
Physical(911)Address of Facility:
Name of Responsible Official: 17av ��Sin
Title: 0,7 Telephone#: _(232) _ 7:5 2w 0
IJ e-mail Address:
Mailing Address of Responsible Official: Po Box Y 57
G✓4s ;�, oy, , Nc 27r-g-9
Facility Technical/Permit Mailing Contact:
Title: Telephone#: -
e-mail Address:
Mailing Address of Technical/Permit mailing contact:
Inspection Contact:
Title: Telephone#: -
e-mail Address:
Billing/Invoice Contact:
Title: Telephone#:
e-mail Address:
Billing/Invoice Company:
Billing/Invoice Address:
Standard Industrial Classification(SIC)Code(s):
North American Industry Classification System(NAICS
—six digit)Code(s)—If known:
(see instructions)
Report Prepared by: Telephone#:
E-Mail Address:
D
JUN 1 6 2005
Provide to Appropriate DAO Regional Office as needed. DAf1 WARS
Information on This Form cannot be held confidential. �l