AQ_F_0200030_20141126_PRMT_Permit

fi 2�
NCQENR
North Carolina Department of Environment and Natural Resources
Pat McCrory John E. Skvarla, III
Governor Secretary
November 26, 2014
Mr. Gary Coffey, President
Piedmont Wood Products, Inc.
P0 Box 307
.Taylorsville,NC 28681
Subject: Air Permit No. 05786R09
Piedmont Wood Products, Inc.
Taylorsville, Alexander County,North Carolina
Permit Class: Small
Facility ID# 0200030
Dear Mr. Coffey:
In accordance with your completed application received November 4,2014, we are
forwarding herewith Permit No. 05786R09 to Piedmont Wood Products, Inc.,Taylorsville,
Alexander County,North Carolina for the construction and operation of air emissions sources or air
cleaning devices and appurtenances. Additionally, any emissions activities determined from your air
permit application as meeting the exemption requirements contained in 15A NCAC 2Q .0102 have
been listed for information purposes as an "ATTACHMENT" to the enclosed air permit. Please note
the records retention requirements are contained in General Condition 2 of the General Conditions
and Limitations.
If any parts, requirements, or limitations contained in this permit are unacceptable to you,
you have the right to request a formal adjudicatory hearing within 30 days following receipt of this
permit, identifying the specific issues to be contested. Such a request will stay the effectiveness of
the entire permit. This hearing request must be in the form of a written petition, conforming to G.S.
150B-23 of the North Carolina General Statutes, and filed with the Office of Administrative
Hearings,6714 Mail Service Center, Raleigh,NC 27699-6714. The form for requesting a formal
adjudicatory hearing may be obtained upon request from the Office of Administrative Hearings.
Unless a request for a hearing is made pursuant to G.S. 15013-23,this air permit shall be final and
binding.
You may request modification of your air permit through informal means pursuant to G.S.
15013-22. This request must be submitted in writing to the Director and must identify the specific
provisions or issues for which the modification is sought. Please note that the permit will become
final and binding regardless of a request for informal modification unless a request for a hearing is
also made under G.S. 15013-23.
Mooresville Regional Office-Division of Air Quality
610 East Center Avenue,Suite 301,Mooresville,North Carolina 28115
Phone:[phone]/FAX:[phone]
Internet:www.ncdenr.gov
An Equal Opportunity 1 Affirmative Action Employer-Made in part by recycled paper

Gary Coffey
November 26, 2014
Page 2
Unless exempted by a condition of this permit or the regulations, construction of new
air pollution sources or air cleaning devices, or modifications to the sources or air cleaning
devices described in this permit must be covered under a permit issued by the Division of Air
Quality prior to construction. Failure to do so is a violation of G.S. 143-215.108 and may
subject the Permittee to civil or criminal penalties as described in G.S. 143-215.114A and 143-
215.114 .
This permit shall be effective from November 26, 2014 until October 31,2022, is
nontransferable to future owners and operators, and shall be subject to the conditions and limitations
as specified therein.
Changes have been made to the permit stipulations. The Permittee is responsible for
carefully reading the entire permit and evaluating the requirements of each permit
stipulation. The Permittee shall comply with all terms, conditions, requirements,limitations
and restrictions set forth in this permit. Noncompliance with any permit condition is grounds
for enforcement action,for permit termination, revocation and reissuance, or modification, or
for denial of a permit renewal application. Should you have any questions concerning this matter,
please contact Bob Caudle at 704-663-1699.
Sincerely,
(Sur Ronald E. Slack, Regional Supervisor
Division of Air Quality,NCDENR
JRC
Enclosures
c: Mooresville Regional Office
G:\AQ\SHARED\WPDATA\COUNTIES\ALEXANDER\00030\R09_PERMIT.DOCX

NORTH CAROLINA ENVIRONMENTAL MANAGEMENT COMMISSION
DEPARTMENT OF ENVIRONMENT AND NATURAL RESOURCES
DIVISION OF AIR QUALITY
AIR PERMIT NO. 05786R09
Issue Date:November 26, 2014 Effective Date: November 26, 2014
Expiration Date: October 31, 2022 Replaces Permit: 05786R08
To construct and operate air emission source(s) and/or air cleaning device(s), and for the
discharge of the associated air contaminants into the atmosphere in accordance with the provisions
of Article 21B of Chapter 143, General Statutes of North Carolina(NCGS) as amended,and other
applicable Laws, Rules and Regulations,
Piedmont Wood Products, Inc.
1924 Black Oak Ridge Road
Taylorsville, Alexander County,North Carolina
Permit Class: Small
Facility ID# 0200030
(the Permittee) is hereby authorized to construct and operate the air emissions sources and/or air
cleaning devices and appurtenances described below:
Emission Emission Source Control Control System
Source ID Description ESystem ID Description
WC-1 woodworking operation BF-1 bagfilter(3,06( square feet
lof filter area)
in accordance with the completed application 0200030.14A received November 4, 2014 including
any plans, specifications,previous applications, and other supporting data, all of which are filed
with the Department of Environment and Natural Resources, Division of Air Quality(DAQ) and are
incorporated as part of this permit.
This permit is subject to the following specified conditions and limitations including any
TESTING, REPORTING, OR MONITORING REQUIREMENTS:
A. SPECIFIC CONDITIONS AND LIMITATIONS
1. Any air emission sources or control devices authorized to construct and operate above must
be operated and maintained in accordance with the provisions contained herein. The
Permittee shall comply with applicable Environmental Management Commission
Regulations, including Title 15A North Carolina Administrative Code (NCAC), Subchapter
2D .0202, 2D .0512, 2D .0521, 2D..0535,2D .0540 and 2D .0611.

Permit No. 05786R09
Page 2
2. PERMIT RENEWAL AND EMISSION INVENTORY REQUIREMENT -The Permittee,
at least 90 days prior to the expiration date of this permit, shall request permit renewal by
letter in accordance with 15A NCAC 2Q .0304(d)and(0. Pursuant to 15A NCAC 2Q
.0203(i), no permit application fee is required for renewal of an existing air permit (without
a modification request). The renewal request(with AA application form) should be
submitted to the Regional Supervisor, DAQ. Also, at least 90 days prior to the expiration
date of this permif `the Permittee shall submit the air pollution emission inventory-report
(with Certification Sheet) in accordance with 15A NCAC 2D .0202,pursuant to N.C.
General Statute 143 215.65. The report shall be submitted to the Regional Supervisor,DAQ
and shall document air pollutants emitted for the 2021 calendar year.
3. PARTICULATE CONTROL REQUIREMENT; as required by 15A NCAC 2D
.05 12,"Particulates from Wood Products Finishing Plants"; a person shall not cause, allow,
or permit particulate matter caused by the working, sanding,or finishing of wood to be
discharged from any stack, vent, or building into the atmosphere without providing,as a
minimum for its collection, adequate duct work and properly designed collectors, or such
other devices as approved by the Commission. As part of this requirement,the following
procedures must be followed during the wood dust storage;bin dumping operations:
a. The canvas curtains, front and back,must be completely lowered to the ground and
the bin dumping area totally enclosed during the short bed truck loading operation.
b. Loading of a long bed truck will be done in sections(front,middle, and back of the
long bed truck) and the curtain position will be as follows:
i. During the front section loading operation,the front canvas curtain must be
completely lowered to the ground and the back curtain should be extended across
the top of the trailer or in the bed of the trailer in the most effective position
which must extend to each side of the trailer walls.
ii. During the middle section loading operation,the front and back canvas curtain
should be extended across the top of the trailer or in the bed of the trailer in the
most effective position which must extend to each side of the trailer walls.
iii. During the back section loading operation,the back canvas curtain must be
completely lowered to the ground and the front curtain should be extended across
the top of the trailer or in the bed of the trailer in the most effective position
which must extend to each side of the trailer walls.
c. Dust emissions from the short bed truck and long bed trailer dumping operation must
last no longer than six (6)minutes and only once per six (6)hour period.
d. Ripped or torn curtains must be repaired or replaced as soon as possible but no later
than before the next period of bin dumping occurs.
e. Collected wood dust should be disposed of properly. Dumping or storing wood dust
on the ground is prohibited on plant property.

Permit No. 05786R09
Page 3
f. Employees trained in the proper wood dust storage dumping procedures by the
Permittee must oversee the wood dust storage dumping process each time it occurs.
4. VISIBLE EMISSIONS CONTROL REQUIREMENT - As required by 15A NCAC 2D
.0521 "Control of Visible Emissions," visible emissions from the emission sources,
manufactured after July 1, 1971, shall not be more than 20 percent opacity when averaged
over a six-minute period,except tlat ix-minute periods averaging not more than 87 percent t
opacity may occur not more than once in any hour nor more than four times in any 24-hour
period. However, sources which must comply with 15A NCAC 2D .0524 "New Source
Performance Standards" or .1110 "National Emission Standards for Hazardous Air
Pollutants" must comply with applicable visible emissions requirements contained therein.
5. NOTIFICATION REQUIREMENT -As required by 15A NCAC 2D .0535,the Permittee of
a source of excess emissions that last for more than four hours and that results from a
malfunction, a breakdown of process or control equipment or any other abnormal
conditions, shall:
a. Notify the Director or his designee of any such occurrence by 9:00 a.m. Eastern time
of the Division's next business day.of becoming aware of the occurrence and
describe:
i. the name and location of the facility,
ii. the nature and cause of the malfunction or breakdown,
iii. the time when the malfunction or breakdown is first observed,
iv. the expected duration, and
V. an estimated rate of emissions.
b. Notify the Director or his designee immediately when the corrective measures have
been accomplished.
This reporting requirement does not allow the operation of the facility in excess of
Environmental Management Commission Regulations.
6, FUGITIVE DUST CONTROL REQUIREMENT - As required by 15A NCAC 2D .0540
"Particulates from Fugitive Dust Emission Sources," the Permittee shall not cause or allow
fugitive dust emissions to cause or contribute to substantive complaints or excess visible
emissions beyond the property boundary. If substantive complaints or excessive fugitive
dust emissions from the facility are observed beyond the property boundaries for six minutes
in any one hour(using Reference Method 22 in 40 CFR,Appendix A),the owner or
operator may be required to submit a fugitive dust plan as described in 21) .0540(f).
"Fugitive dust emissions" means particulate matter that does not pass through a process
stack or vent and that is generated within plant property boundaries from activities such as:
unloading and loading areas,process areas stockpiles, stock pile working,plant parking lots,
and plant roads (including access roads and haul roads).

Permit No. 05786R09
Page 4
7. FABRIC FILTER REQUIREMENTS includingcartridge artridge filters,baghouses, and other dry
filter particulate collection devices -As required by 15A NCAC 2D .0611, particulate matter
emissions shall be controlled as described in the permitted equipment list.
a. Inspection and Maintenance Requirements - To comply with the provisions of this
permit and ensure that emissions do not exceed the regulatory limits, the Permittee
= shall-perform, at a minimum,an annual (foa each 12 month period following the
initial inspection) internal inspection of each bagfilter system. In addition,the
Permittee shall perform periodic inspections and maintenance as recommended by
the equipment manufacturer.
b. Recordkeeping Requirements - The results of all inspections and any variance from
manufacturer's recommendations or from those given in this permit(when
applicable) shall be investigated with corrections made and dates of actions recorded
in a logbook. Records of all maintenance activities shall be recorded in the logbook.
The logbook (in written or electronic format) shall be kept on-site and made
available to DAQ personnel upon request.
B. GENERAL CONDITIONS AND LIMITATIONS
1. In accordance with G.S. 143-215.108(c)(1), TWO COPIES OF ALL DOCUMENTS,
REPORTS, TEST DATA,MONITORING DATA,NOTIFICATIONS, REQUESTS FOR
RENEWAL, AND ANY,OTHER INFORMATION REQUIRED BY THIS PERMIT shall
be submitted to the:
Regional Supervisor
North Carolina Division of Air Quality
Mooresville Regional Office
610 East Center Avenue, Suite 301
Mooresville,NC 28115
704-663-1699
For identification purposes, each submittal should include the facility name as listed on the
permit,the facility identification number, and the permit number.
2. RECORDS RETENTION REQUIREMENT - In accordance with 15A NCAC 2D .0605,
any records required by the conditions of this permit shall be kept on site and made available
to DAQ personnel for inspection upon request. These records shall be maintained in a form
suitable and readily available for expeditious inspection and review. These records must be
kept on site for a minimum of 2 years,unless another time period is otherwise specified.
3. ANNUAL FEE PAYMENT- Pursuant to 15A NCAC 2Q .0203(a),the Permittee shall pay
the annual permit fee within 30 days of being billed by the DAQ. Failure to pay the fee in a
timely manner will cause the DAQ to initiate action to revoke the permit.

Permit No. 05786R09
Page 5
4. EQUIPMENT RELOCATION- In accordance with 15A NCAC 2Q .0301, a new air permit
shall be obtained by the Permittee prior to establishing, building, erecting, using, or
operating the emission sources or air cleaning equipment at a site or location not specified in
this permit.
5. REPORTING REQUIREMENT - In accordance with 15A NCAC 2Q .0309, any of the
folknAi ig that would result in previously unpermitted,new, or increased•.emissions must be
reported to the Regional Supervisor,DAQ:
a. changes in the information submitted in the application regarding facility emissions;
b. changes that modify equipment or processes of existing permitted facilities; or
c. changes in the quantity or quality of materials processed.
If appropriate,modifications to the permit may then be made by the DAQ to reflect any
necessary changes in the permit conditions. In no case are any new or increased emissions
allowed that will cause a violation of the emission limitations specified herein.
6. In accordance with 15A NCAC 2Q .0309,this permit is subject to revocation or
modification by the DAQ upon a determination that information contained in the application
or presented in the support thereof is incorrect, conditions under which this permit was
granted have changed, or violations of conditions contained in this permit have occurred. In
accordance with G.S. 143-215.108(c)(1),the facility-shall be properly operated,and
maintained at all times in a manner that will effect an overall reduction in air pollution.
Unless otherwise specified by this permit,no emission source may be-operated without the
concurrent operation of its associated air cleaning device(s) and appurtenances.
7. In accordance with G.S. 143-215.108(c)(1),this permit is nontransferable by the Permittee.
Future owners and operators must obtain a new air permit from the DAQ.
8. In accordance with G.S. 143-215.108(c)(1),this issuance of this permit in no way absolves
the Permittee of liability for any potential civil penalties which may be assessed for
violations of State law which have occurred prior to the effective date of this permit.
9. In accordance with G.S. 143-215.108(c)(1),this permit does not relieve the Permittee of the
responsibility.of complying with all applicable requirements of any Federal, State, or Local
water quality or land quality control authority.
10. In accordance with 15A NCAC 2D .0605, reports on the operation and maintenance of the
facility shall be submitted by the Permittee to the Regional Supervisor, DAQ at such
intervals and in such form and detail as may be required by the DAQ. Information.required
in such reports may include,but is not limited to, process weight rates, firing rates,hours of
operation, and preventive maintenance schedules.
11. A violation of any term or condition of this permit shall subject the Permittee to enforcement
pursuant to G.S. 143-215.114A, 143-215.11413, and 143-215.114C, including assessment of
civil and/or criminal penalties.

Permit No. 05786R09
Page 6
12. Pursuant to North Carolina General Statute 143-215.3(a)(2),no person shall refuse entry or
access to any authorized representative of the DAQ who requests entry or access for
purposes of inspection, and who presents appropriate credentials,nor shall any person
obstruct,hamper, or interfere with any such representative while in the process of carrying
out his official duties. Refusal of entry or access may constitute grounds for permit
revocation and assessment of civil penalties.
13. In accordance with G.S. 143-215.108(c)(1),this permit does not relieve the Permittee of the
responsibility of complying with any applicable Federal, State, or Local requirements
governing the handling, disposal, or incineration of hazardous, solid, or medical wastes,
including the Resource Conservation and Recovery Act(RCRA)administered by the
Division of Waste Management.
14. PERMIT RETENTION REQUIREMENT- In accordance with 15A NCAC 2Q .0110,the
Permittee shall retain a current copy of the air permit at the site. The Permittee must make
available to personnel of the DAQ,upon request,the current copy of the air permit for the
site.
15. CLEAN AIR ACT SECTION 112(r)REQUIREMENTS - Pursuant to 15A NCAC 2D .2100
"Risk Management Program," if the Permittee is required to develop and register a risk
management plan pursuant to Section 112(r) of the Federal Clean Air Act,then the
Permittee is required to register this plan with the USEPA in accordance with 40 CFR Part
68.
16. PREVENTION OF ACCIDENTAL RELEASES - GENERAL DUTY -Pursuant to Title I
Part A Section 112(r)(1) of the Clean Air Act "Hazardous Air Pollutants - Prevention of
Accidental Releases -Purpose and General Duty," although a risk management plan may not
be required, if the Permittee produces,processes, handles, or stores any amount of a listed
hazardous substance,the Permittee has a general duty to take such steps as are necessary to
prevent the accidental release of such substance and to minimize the consequences of any
release. This condition is federally-enforceable only.
17. GENERAL EMISSIONS TESTING AND REPORTING REQUIREMENTS - If emissions
testing is required by this permit,or the DAQ, or if the Permittee submits emissions testing
to the DAQ in support of a permit application or to demonstrate compliance,the Permittee
shall perform such testing in accordance with 15A NCAC 2D .2600 and follow all DAQ
procedures including protocol approval,regional notification,report submittal, and test
results approval.

Permit No. 05786R09
Page 7
Permit issued this the 26t'of November, 2014.
NORTH CAROLINA ENVIRONMENTAL MANAGEMENT COMMISSION
Ronald E. Slack
Regional Supervisor
By Authority of the Environmental Management Commission
Air Permit No. 05786R09

ATTACHMENT to Permit No. 05786R09,November 26, 2014
Insignificant/Exempt Activities
Source Exemption Source of Source of Title V
Regulation TAPs? Pollutants?
I-B 1 -No. 2 fuel oil-fired boiler (0.47 2Q .0102
million Btu per hour maximum heat input) Yes Yes
subject to GACT Subpart JJJJJJ (c)(2)(B)(i)(II)
1. Because an activity is exempted from being required to have a permit or permit modification
does not mean that the activity is exempted from an applicable requirement or that the owner
or operator of the source is exempted from demonstrating compliance with any applicable
requirement.
2. When applicable,emissions from stationary source activities identified above shall be
included in determining compliance with the permit requirements for toxic air pollutants
under 15A NCAC 2D .1100 "Control of Toxic Air Pollutants" or 2Q .0711 "Emission Rates
Requiring a Permit."