AQ_F_0900066_20150304_PRMT_Permit

ATA
NCDENR
North Carolina Department of Environment and Natural Resources
Pat McCrory Donald R. van der Vaart
Governor Secretary
March 4, 2015
Mr. John Sargent
General Manager - South Central Region
Murphy-Brown, LLC -Bladenboro Feed Mill
PO Box 759
Rose Hill,NC 28458
Subject: Air Permit No. 08155RI O
Murphy-Brown, LLC - Bladenboro Feed Mill
Bladenboro, Bladen County,North Carolina
Permit Class: Synthetic Minor
Facility ID# 0900066
Dear Mr. Sargent:
In accordance with your completed application received January 30, 2015, we are
forwarding herewith Permit No. 08155R10 to Murphy-Brown, LLC -Bladenboro Feed Mill,
Bladenboro, Bladen County,North Carolina for the construction and operation of air emissions
sources or air cleaning devices and appurtenances. Additionally, any emissions activities
determined from your air permit application as meeting the exemption requirements contained in
15A NCAC 2Q .0102 have been listed for information purposes as an "ATTACHMENT" to the
enclosed air permit. Please note the records retention requirements are contained in General
Condition 2 of the General Conditions and Limitations.
If any parts, requirements, or limitations contained in this permit are unacceptable to you,
you have the right to request a formal adjudicatory hearing within 30 days following receipt of this
permit, identifying the specific issues to be contested. Such a request will stay the effectiveness of
the entire permit. This hearing request must be in the form of a written petition, conforming to G.S.
150B-23 of the North Carolina General Statutes, and filed with the Office of Administrative
Hearings, 6714 Mail Service Center, Raleigh,NC 27699-6714. The form for requesting a formal
adjudicatory hearing may be obtained upon request from the Office of Administrative Hearings.
Unless a request for a hearing is made pursuant to G.S. 150B-23, this air permit shall be final and
binding.
You may request modification of your air permit through informal means pursuant to G.S.
150B-22. This request must be submitted in writing to the Director and must identify the specific
provisions or issues for which the modification is sought. Please note that the permit will become
Fayetteville Regional Office-Division of Air Quality
Systel Building,225 Green Street,Suite 714,Fayetteville,North Carolina 28301-5094
Phone:[phone] FAX:[phone]
Intemet:www,ncdenr.gov
An Equal Opportu nity l Affirmative Action Employer-Made in part by recycled paper

John Sargent
March 4, 2015
Page 2
final and binding regardless of a request for informal modification unless a request for a hearing is
also made under G.S. 150B-23.
Unless exempted by a condition of this permit or the regulations, construction of new
air pollution sources or air cleaning devices, or modifications to the sources or air cleaning
devices described in this permit must be covered under a permit issued by the Division of Air
Quality prior to construction. Failure to do so is a violation of G.S. 143-215.108 and may
subject the Permittee to civil or criminal penalties as described in G.S. 143-215.114A and 143-
215.114B.
This permit shall be effective from March 4, 2015 until February 29, 2023, is
nontransferable to future owners and operators, and shall be subject to the conditions and limitations
as specified therein.
Changes have been made to the permit stipulations. The Permittee is responsible for
carefully reading the entire permit and evaluating the requirements of each permit
stipulation. The Permittee shall comply with all terms, conditions, requirements, limitations
and restrictions set forth in this permit. Noncompliance with any permit condition is grounds
for enforcement action, for permit termination, revocation and reissuance, or modification, or
for denial of a permit renewal application. Should you have any questions concerning this matter,
please contact Joshua L. Harris at 910-433-3300.
Sincerely,
r
Steven F. Vozzo, Regional Supervisor
Division of Air Quality,NCDENR
JLH
Enclosures
c: Fayetteville Regional Office

NORTH CAROLINA ENVIRONMENTAL MANAGEMENT COMMISSION
DEPARTMENT OF ENVIRONMENT AND NATURAL RESOURCES
DIVISION OF AIR QUALITY
AIR PERMIT NO. 08155R10
Issue Date: March 4, 2015 Effective Date: March 4, 2015
Expiration Date: February 28, 2023 Replaces Permit: 08155R09
To construct and operate air emission source(s) and/or air cleaning device(s), and for the
discharge of the associated air contaminants into the atmosphere in accordance with the provisions
of Article 21B of Chapter 143, General Statutes of North Carolina (NCGS) as amended, and other
applicable Laws, Rules and Regulations,
Murphy-Brown, LLC -Bladenboro Feed Mill
255 Bryant Swamp Road
Bladenboro, Bladen County,North Carolina
Permit Class: Synthetic Minor
Facility ID#0900066
(the Permittee) is hereby,authorized to construct and operate the air emissions sources and/or air
cleaning devices and appurtenances described below:
_ .. ........ ..........
E10lt�rpe� t� n
F_[ . and soft ingredients it
Truck grain receiving pit _ Bagfilter
' ES-001 . ' Fc
D-107
gr P (850 square_feet of filter area)
ES-002 Receiving turnhead negative air system CD 123 Bagfilter
(332 square feet of filter a r ea) ,
_ _ ....._
ES-003 Receiving turnhead negative air system CD-124 Bagfilter
(209 square feet of filter area)
ES-004 Pneumatic receiving system CD-129
Bagfilter
(200 square feet of filter area)
E5-005 Pneumatic receiving system CD-133
Bagfilter
(200 square feet of filter area)
ES-009 Ground grain negative air system [CD-218 Bagfilter
l
300 square feet of filter area_ ( g �
ES-016a One(1)load-out system having twenty(20)load- NIA _
(NESHAP) out bins
ES-016b One(1)load-out system having twenty(20)load-I NIA
(NESHAP) :� out bins
ES-017 Rail Car Receiving NIA
L . _ ..

Permit No. 08155R10
Page 2
41W
ES-018 Truck grain receiving pit, 15,000 bushels/hr max. NIA
throughput,with partially enclosed shelter
ES-020a Wet grain storage silo, 5 5,000 bushels capacity NIA
_ ..... ...... .
ES-020b— Wet grain storage silo, 55,000 bushels — �capacity N/A
I.Ypik
Generator,No. 2 fuel oil fired,750 KW, Onan
ES-016 Model D970636382 and Serial 86930A,with NIA
(NESHAP) turbocharger and low temperature aftercooler
control devices.
ES-014 Natural gas/No. 2 fuel oil fired boiler(20.925 NIA
{N,SPS) million Btu per hour maximum heat input)
ES-013 Natural gas/No.2 fuel oil-fired boiler(20.925 N/A
(NSPS) million Btu per hour maximum heat input)
Feed Mill 4peraha
n Airlanco,M o0de1 ft 0of e041 Bagfilter
ES-007a Hammer mill system(capacity: 53 tons/hour) CD-212 ( q )
ES-007b Hammer mill system(capacity: 53 tons/hour) CD-212 Airlanco�Mode1 100AST10-II Bagfilter
co Model
sq.ft.0 of filter area)
SESE 008a Hammer mill system{capacity-53 tonslliour) CD-312 Aulanco Model 100AST10 II Bagfilter
..... .... ..... - (1,640..sq•ft. of filter area)
ES 008b Hammer mill system(capacity: 53 tons/hour) CD-312 Airlanco Model 100AST10-II Bagfilter
(1,640 sq.ft. of filter area)
iES-010 Pelleting system(capacity: 60 tons hour) CD-508 Three(3)cyclones installed in parallel
(NESHAP) (54 inches in diameter each)
ES-Ol l Three(3)cyclones installed in parallel
Pelleting system(capacity: 60 tons/hour) 7CD —[8
(NESHAP) (54 inches in diameter each)
ES-0 12 Three(3)cyclones installed in parallel
(NESHAP) Pelleting system(capacity: 60 tons/hour) CD-708 (54 inches in diameter each)
.... ... ......
ES-015 Mixed...feed turnhead negative air system Bagfilter
(NESHAP] (capacity:36 tons/hour} CD-422 (209 square feet of filter area)
ES-019 Natural gas fired grain dryer,47.8 million Btu N/A
� . _ _
per hr maximum heat input
ES-021 I Grain dryer truck loadout NIA -
ES-022 Bagging Operation NIA
-----
in accordance with the completed application 0900066.15A received January 30, 2015 including
any plans, specifications, previous applications, and other supporting data, all of which are filed
with the Department of Environment and Natural Resources, Division of Air Quality(DAQ) and are
incorporated as part of this permit.
This permit is subject to the following specified conditions and limitations including any
TESTING REPORTING OR MONITORING REQUIREMENTS:

Permit No. 08155R10
Page 3
A. SPECIFIC CONDITIONS AND LIMITATIONS
1. Any air emission sources or control devices authorized to construct and operate above must
be operated and maintained in accordance with the provisions contained herein. The
Permittee shall comply with applicable Environmental Management Commission
Regulations, including Title 15A North Carolina Administrative Code (NCAC), Subchapter
2D .0202, 2D .0503, 2D .0515, 2D .0516, 2D .0521, 2D .0524 (40 CFR 60, Subpart Dc), 2D
.0535, 2D .0540, 2D .0611, 2D .I 111 (40 CFR 63, Subpart DDDDDDD, Subpart ZZZZ), 2D
.1806, 2Q .0315, 2Q .0317 (Avoidance) and 2Q .0711.
2. PERMIT RENEWAL AND EMISSION INVENTORY REQUIREMENT - The Permittee,
at least 90 days prior to the expiration date of this permit, shall request permit renewal by
letter in accordance with 15A NCAC 2Q .0304(d) and (f). Pursuant to 15A NCAC 2Q
.0203(i), no permit application fee is required for renewal of an existing air permit(without
a modification request). The renewal request (with AA application form) should be
submitted to the Regional Supervisor, DAQ. Also, at least 90 days prior to the expiration
date of this permit, the Permittee shall submit the air pollution emission inventory report
(with Certification Sheet) in accordance with 15A NCAC 2D .0202, pursuant to N.C.
General Statute 143 215.65. The report shall be submitted to the Regional Supervisor, DAQ
and shall document air pollutants emitted for the 2021 calendar year.
3. PARTICULATE CONTROL REQUIREMENT - As required by 15A NCAC 2D .0503
"Particulates from Fuel Burning Indirect Heat Exchangers,"particulate matter emissions
from the fuel burning indirect heat exchangers shall not exceed the allowable emission rates
listed below:
Natural gas/No. 2 fuel oil-fired boiler
(20.925 million Btu per hour maximum heat input) 0.41
(ES-014)
Natural gas/No. 2 fuel oil-fired boiler
(20.925 million Btu per hour maximum heat input) 0.41
(ES-013)
4. PARTICULATE CONTROL REQUIREMENT - As required by 15A NCAC 2D .0515
"Particulates from Miscellaneous Industrial Processes," particulate matter emissions from
the emission sources shall not exceed allowable emission rates. The allowable emission rates
are, as defined in 15A NCAC 2D .0515, a function of the process weight rate and shall be
determined by the following equation(s), where P is the process throughput rate in tons per
hour (tons/hr)and E is the allowable emission rate in pounds per hour (lbs/hr).
E=4.10 * (P)11-61 for P <= 30 tons/hr, or
E= 55 * (P) '-"- 40 for P>30 tons/hr
5. SULFUR DIOXIDE CONTROL REQUIREMENT - As required by 15A NCAC 2D .0516
"Sulfur Dioxide Emissions from Combustion Sources," sulfur dioxide emissions from the
combustion sources shall not exceed 2.3 pounds per million Btu heat input.

Permit No. 08155R10
Page 4
- 6. VISIBLE EMISSIONS CONTROL REQUIREMENT - As required by 15A NCAC 2D
.0521 "Control of Visible Emissions," visible emissions from the emission sources,
manufactured after July 1, 1971, shall not be more than 20 percent opacity when averaged
over a six-minute period, except that six-minute periods averaging not more than 87 percent
opacity may occur not more than once in any hour nor more than four times in any 24-hour
period. However, sources which must comply with 15A NCAC 2D .0524 "New Source
Performance Standards" or .I 110 "National Emission Standards for Hazardous Air
Pollutants" must comply with applicable visible emissions requirements contained therein.
7. 15A NCAC 2D .0524 "NEW SOURCE PERFORMANCE STANDARDS" - For Natural
gas/No. 2 fuel oil-fired boiler(20.925 million Btu per hour maximum heat input) (ID No.
ES-013) and Natural gas/No. 2 fuel oil-fired boiler (20.925 million Btu per hour maximum
heat input) (ID No. ES-014),the Permittee shall comply with all applicable provisions,
including the notification,testing, reporting, recordkeeping, and monitoring requirements
contained in Environmental Management Commission Standard 15A NCAC 2D .0524
"New Source Performance Standards" (NSPS) as promulgated in 40 CFR 60, Subpart Dc,
including Subpart A"General Provisions."
a. NSPS Reporting Requirements - In addition to any other notification requirements to
the Environmental Protection Agency (EPA),the Permittee is required to NOTIFY
the Regional Supervisor, DAQ, in WRITING, of the following:
i. The sulfur content of the distillate oil combusted in an affected source shall
not exceed 0.5 percent by weight. Within 30 days after each six-month period
of the calendar year (by January 30 for the previous six-month period
between July and December and by July 30 for the previous six-month period
between January and June),the Permittee must submit in writing to the
Regional Supervisor, DAQ,the sulfur content of the distillate oil combusted
in an affected source. If fuel supplier certification is used to demonstrate
compliance, fuel supplier certification shall include the following
information:
A. The name of the oil supplier;
B. A statement from the oil supplier that the oil complies with the
specification under the definition of distillate oil in 40 CFR 60.41(c);
and
C. A certified statement signed by the owner or operator of an affected
source that the records of fuel supplier certification submitted
represent.all of the fuel combusted during the reporting period.
b. NSPS Recordkeeping Requirements - In addition to any other recordkeeping
requirements of the EPA,the Permittee is required to maintain records as follows:
i. The amounts of each fuel combusted during each month; and
ii. All records required under this section shall be maintained for a period of two
years following the date of such record.

Permit No. 08155R10
Page 5
c. NSPS Emissions Limitations - As required by 15A NCAC 2D .0524,the following
permit,limits shall not be exceeded:
ARM
it
Natural gas/No. 2 fuel oil-fired boiler
(20.925 million Btu per hour maximum heat input} Sulfur content 0.5%by weight '
(ES-013)
Natural gas/No. 2 fuel oil-fired boiler
(20.925 million Btu per hour maximum heat input): Sulfur content 0.5% by weight
(ES-014)
8. NOTIFICATION REQUIREMENT-As required by 15A NCAC 2D .0535, the Permittee of
a source of excess emissions that last for more than four hours and that results from a
malfunction, a breakdown of process or control equipment or any other abnormal
conditions, shall:
a. Notify the Director or his designee of any such occurrence by 9:00 a.m. Eastern time
of the Division's next business day of becoming aware of the occurrence and
describe:
i. the name and location of the facility,
ii. the nature and cause of the malfunction or breakdown,
iii. the time when the malfunction or breakdown is first observed,
iv. the expected duration, and
V. an estimated rate of emissions.
b. Notify the Director or his designee immediately when the corrective measures have
been accomplished.
This reporting requirement does not allow the operation of the facility in excess of
Environmental Management Commission Regulations.
9. FUGITIVE DUST CONTROL REQUIREMENT - As required by 15A NCAC 2D .0540
"Particulates from Fugitive Dust Emission Sources," the Permittee shall not cause or allow
fugitive dust emissions to cause or contribute to substantive complaints or excess visible
emissions beyond the property boundary. If substantive complaints or excessive fugitive
dust emissions from the facility are observed beyond the property boundaries for six minutes
in any one hour(using Reference Method 22 in 40 CFR,Appendix A),the owner or
operator may be required to submit a fugitive dust plan as described in 2D .0540(f).
"Fugitive dust emissions" means particulate matter that does not pass through a process
stack or vent and that is generated within plant property boundaries from activities such as:
unloading and loading areas, process areas stockpiles, stockpile working,plant parking lots,
and plant roads (including access roads and haul roads).

Permit No. 08155RI0
Page 6
10. FABRIC FILTER REQUIREMENTS including cartridge filters, baghouses, and other dry
filter particulate collection devices - As required by 15A NCAC 2D .0611, particulate matter
emissions shall.be controlled as described in the permitted equipment list.
a. Inspection and Maintenance_Requirements - To comply with the provisions of this
permit and ensure that emissions do not exceed the regulatory limits,the Permittee
shall perform, at a minimum, an annual (for each 12 month period following the
initial inspection) internal inspection of each bagfilter system. In addition,the
Permittee shall perform periodic inspections and maintenance as recommended by
the equipment manufacturer.
b. Recordkeeping Requirements - The results of all inspections and any variance from
manufacturer's recommendations or from those given in this permit(when
applicable) shall be investigated with corrections made and dates of actions recorded
in a logbook. Records of all maintenance activities shall be recorded in the logbook.
The logbook(in written or electronic format) shall be kept on-site and made
available to DAQ personnel upon request.
11. CYCLONE REQUIREMENTS - As required by 15A NCAC 2D .0611,particulate matter
emissions shall be controlled as described in the permitted equipment list.
a. Inspection and Maintenance Requirements - To comply with the provisions of this
permit and ensure that emissions do not exceed the regulatory limits, the Permittee
shall perform an annual (for each 12 month period following the initial inspection)
inspection of the cyclone system. In addition, the Permittee shall perform periodic
inspections and maintenance (I&M) as recommended by the manufacturer.
b. Recordkeeping Requirements - The results of all inspections and any variance from
the manufacturer's recommendations or from those given in this permit(when
applicable) shall be investigated with corrections made and dates of actions recorded
in a cyclone logbook. Records of all maintenance activities shall be recorded in the
logbook. The cyclone logbook (in written or electronic format) shall be kept on-site
and made available to DAQ personnel upon request.
12. 15A NCAC 2D .1111 "GENERALLY AVAILABLE CONTROL TECHNOLOGY" - Area
Source Standards for Prepared Feeds Manufacturing_(GACT 7D) - The Permittee shall
comply with all applicable provisions, including the notification,testing, and monitoring
requirements contained in Environmental Management Commission Standard 15A NCAC
2D .1111, as promulgated in 40 CFR 63, Subpart DDDDDDD (7D), "National Emission
Standards for Hazardous Air Pollutants Area Source Standards for Prepared Feeds
Manufacturing", including Subpart A "General Provisions."

Permit No. 08155RI O
Page 7
a. 40 CFR 63.11620 - Compliance Dates for Existing and New Sources
i. A prepared feeds manufacturing affected source is existing if you
commenced construction or reconstruction of the facility on or before July
27, 2009.
ii. A prepared feeds manufacturing affected source is new if you commenced
construction or reconstruction of the facility after July 27, 2009.
iii. Existing sources have a compliance date of January 5, 2012.
IV. The compliance date for new sources is upon start-up.
b. Operations Standards - As required by 15A NCAC 2D .1111 and 40 CFR 63,
Subpart DDDDDDD (71)),the following operational standards are applicable to
prepared feed manufacturing facilities that use a material containing chromium(Cr)
in amounts greater than 0.1 % by weight, or a material containing manganese (Nin)
in amounts greater than 1.0 % by weight and are Area Sources of HAPs. NOTE: the
pre-mix or supplement or concentrate ingredients stand alone for comparison to the -
Cr > 0.1 % by weight or Mn > 1.0 % by weight issue; not the actual ingredient %
into the overall animal feed production.
The affected source is the collection of all equipment and activities necessary to
produce animal feed from the point in the process where a material containing Cr or
Mn is added,to the point where the finished animal feed product leaves the facility.
c. 40 CFR 63.11621 - Standards for New and Exist ing Facilities
i. Management Practices - In all areas of the affected source where materials
containing Cr or Mn are stored, used, or handled, you shall comply with the
following management practices:
A. You shall perform housekeeping measures to minimize excess dust.
These measures shall include, but not be limited to:
I. You shall use either an industrial vacuum system or manual
sweeping to reduce the amount of dust;
II. At least once per month, you shall remove dust from walls,
ledges, and equipment using low pressure air or by other
means, and then sweep or vacuum the area;
111. You shall keep doors shut except during normal ingress and
egress.
B. You shall maintain and operate all process equipment in accordance
with manufacturer's specifications and in a manner to minimize dust
creation.
ii. Any Cr or Mn raw materials shall be stored in closed containers.

Permit No. 08155RI0
Page 8
iii. Mixers shall be covered during operation(except when materials are being
added) and shall be operated so as to minimize dust. Materials containing Cr
or Mn shall be added in a manner that minimizes emissions.
iv. A device shall be installed and operated at the loadout end of each bulk
loader to reduce the distance between the loading arm and the truck or railcar
(i.e., loadout chutes/socks/flex hose).
V. For pelleting operations at EXISTING FACILITIES with an average daily
feed production level exceeding 50 tons per day, you shall capture emissions
and route them to a cyclone designed to reduce emissions of particulate
matter. The initial determination of the average daily feed production level is
based on the one-year period prior to the compliance date. For existing
sources, the initial average daily feed production level is based on the
amount of feed product produced between May 4, 2011 and May 4, 2012,
divided by the number of operating days during that period.
The cyclone shall be operated in accordance with good air pollution control
practices and manufacturer's specifications and operating instructions, if
available, or standard operating procedures shall be developed by the facility
owner or operator to ensure proper operation and maintenance of the cyclone.
For pelleting operations at NEW FACILITIES with an average daily feed
production level exceeding 50 tons per day, you shall capture emissions and
route them to a cyclone designed to reduce emissions of particulate matter
(PM,not PM-10) by 95 percent or greater. "Average Daily Feed Production
Level" is defined as the average amount of animal feed products produced
each day over an annual period. For new sources, the initial average feed
daily production level is based on the design production rate. The subsequent
average daily feed production levels are determined annually and are based
on the amount of animal feed products produced in a calendar year divided
by the number of days in which the production processes were in operation.
You shall also comply with the three requirements below(A, B, and C):
A. FOR NEW Facilities - You shall demonstrate that the cyclone is
designed to reduce emissions PM by 95 percent or greater using one
of the three methods below.
I. Manufacturer's Specifications,
II. Certification by a Professional Engineer or a Responsible
Official, or
III. Method 5 performance test for PM.
B. You shall establish an inlet flow rate, inlet velocity, pressure drop, or
fan amperage range that represents proper operation of the cyclone in
accordance with paragraph(b)(v)(A)above. (See 40 CFR
63.11621(e)(2))

Permit No. 08155RI O
Page 9
C. You shall maintain and operate the cyclone in accordance with
manufacturer's specifications. If manufacturer's specifications are not
available, you shall develop and follow standard maintenance and
operating procedures that ensure proper operation of the cyclone.
d. 40 CFR 63.11622 - Monitoring Requirements for New and Existing Sources
i. The Permittee shall conduct guarterlX inspections of each cyclone for
corrosion, erosion, or any other damage that could result in air in-leakage,
and record results of any maintenance or repairs in a logbook to be
maintained on site.
ii. For NEW Facilities - When the pelleting process is in operation, the
Permittec shall monitor the inlet flow rate, inlet velocity, pressure drop, or
fan amperage at least once per day, and record the results of this monitoring
in a logbook to be maintained on site. For EXISTING Facilities - When the
pelleting process is in operation, the Permittee shall monitor the cyclone
weekly for proper air pollution control practices and manufacturer's
specifications and operating instructions (if available) or standard operating
procedures developed by the facility owner or operator.
iii. The monthly housekeeping requirement(dusting and sweeping/vacuuming)
shall be tracked and dated in a logbook to be maintained on site at all times.
iv. Inspect the device required at the loadout end of a bulk loader monthly and
record results of any maintenance or repairs in a logbook to be maintained on
site.
e. 40 CFR 63.11623 - Testing Requirements - FOR NEW Sources ONLY
i. If a performance test is utilized to demonstrate compliance with the required
95 percent or greater reduction in particulate matter emissions on a cyclone
for PM mass emission rate, Method 5 shall be used.
f. 40 CFR 63.11624 -Notifications Re ortin and Recordke in
p g� � g
i. Initial Notification date for Existing Sources was May 5, 2010. For New
Sources, the Initial Notification is due no Iaer than 120 days after you
become subject to this Subpart. The initial notification shall include:
A. Name, address,phone number, and email address of the owner or
operator.
B. Address (physical address) of the affected source.
C. An identification of the relevant standard (i.e., 7D).
D. A brief description of the operation.
E. Per 63.11624(c)(1), one copy of all Notifications shall be kept on site.

Permit No. 08155RI0
Page 10
ii. Notification of Compliance Status (NOCS) - report is required as follows:
A. The NOCS for existing sources is due to NC DAQ on or before May
4, 2012.
B. The NOCS for new sources is due within 120 days after initial start-
up or by October 18, 2010, whichever is later.
C. The NOCS shall include:
I. Company name and address.
II. A statement by a responsible official with that official's name,
title, phone number, email address, and signature certifying
the truth, accuracy, and completeness of the notification and a
statement of whether the source has complied with all relevant
standards and requirements.
III. For cyclones at NEW Facilities,the range of acceptable
parametric readings for each cyclone (inlet flow rate, inlet
velocity,pressure drop, or fan amperage). For EXISTING
Facilities, records showing proper air pollution control
practices and manufacturer's specifications and operating
instructions (if available) or standard operating procedures
developed by the facility owner or operator.
IV. If daily production is less than 50 tons per day(meaning
cyclones are not applicable), the source shall:
a. keep production records on site.
b. submit an Initial Average Daily Feed Production Level
in the Notification of Compliance Status/ACC report
and keep on site.
iii. NOCS for New Sources After the Compliance Date - If you own or operate a
source that becomes an affected source after the applicable compliance date
of January 5, 2012 for existing sources, or if you begin operating a newly
affected source, you shall submit a Notification of Compliance Status within
120 days of the date that you commence using materials containing Cr or Mn.
This NOCS shall contain the information in paragraph e. (ii)(C)(I) -
(ii)(C)(IV) above.

Permit No. 08155R10
Page 11
iv. Annual Compliance Certification -An annual compliance certification report
shall be prepared each year by March 1 for the previous year containing the
information specified in A. - F. below. You shall submit the report to NC
DAQ if you had any instances of paragraph C. or D. in that year. Keep one
copy on site at all times.
A. Company name and address.
B. A statement by a responsible official with that official's name,title,
phone number, email address, and signature certifying the truth,
accuracy, and completeness of the notification and a statement of
whether the source has complied with all relevant standards and
requirements.
C. If the source is not.in compliance,include a description of deviations
from the applicable requirements,the time periods during which the
deviations occurred, and the corrective actions taken.
D. For NEW Sources - Identification of all instances when the daily inlet
flow rate, inlet velocity, pressure drop, or fan amperage was outside
the range that constitutes proper operation of the cyclone(s). In these
instances, include the time periods when this occurred and the
corrective actions taken. For EXISTING Sources - Records showing
proper air pollution control practices and manufacturer's
specifications and operating instructions (if available) or standard
operating procedures developed by the facility owner or operator.
E. If this facility is not required to install and operate cyclones on the
pelleting operation due to average daily feed production of 50 tpd or
less, a notification is required if the average daily feed production
level for the previous year exceeded 50 tpd. If this occurs, a cyclone
shall be installed and made operational.by July 1 of the following
year.
F. If this facility is required to install and operate cyclones on the
pelleting operation due to average daily feed production being greater
than 50 tpd, a notification is required if the average daily feed
production level for the previous year was 50 tpd or less and the
acility is no longer required to comply with the cyclone
requirements.

Permit No. 08155RI0
Page 12
g. 40 CFR 63.11624(c) - Records. You shall maintain the following records on site:
i. Records of all monthly and quarterly inspections and any corrective actions
required by this Subpart shall be maintained in a logbook on site.
ii. One copy of the Initial Notification and the NOCS on site at all times.
iii. One copy of the Annual Compliance Certification on site at all times.
iv. For each device used at the loadout end of a bulk loader(i.e., chutes/socks/
flex hose), you shall keep records including the following information:
A. date,place, and time of each inspection.
B. person performing the inspection.
- C. results of the inspection, including the date, time, and duration of the
corrective action period from the time the inspection indicated a
problem to the time of the indication that the device was replaced or
restored to operation.
V. For each cyclone installed, you shall keep records including the following
information:
A. For NEW Sources - If you demonstrate that the cyclone is designed to
reduce emission of particulate matter(PM, not PM-10)by 95 percent
or greater by manufacturer's specifications, you shall keep the records
of:
1. Information from the manufacturer regarding the design
efficiency of the cyclone,
11. The inlet flow rate, inlet velocity, pressure drop, or fan
amperage range that represents proper operation of the
cyclone, and
III. The operation and maintenance procedures to ensure proper
operation of the cyclone.

Permit No. 08155R10
Page 13
B. For NEW Sources - If you demonstrate that the cyclone is designed to
reduce emissions of particulate matter by 95 percent or greater by
certification by professional engineer, you shall keep the records of:
I. Certification regarding the design efficiency of the cyclone,
along with supporting information,
II. The inlet flow rate, inlet velocity, pressure drop, or fan
amperage range that represents proper operation of the
cyclone, and
III. The standard maintenance and operating procedures that
ensure proper operation of the cyclone.
C. For NEW Sources - If you demonstrate that the cyclone is designed to
reduce emissions of particulate matter by 95 percent or greater by a
performance test, you shall keep the records of:
I. Results of the testing conducted in accordance with §
63.11623 (Method 5),
II. The inlet flow rate, inlet velocity,pressure drop, or fan
amperage range that represents proper operation of the
cyclone, and
III. The standard maintenance and operating procedures that
ensure proper operation of the cyclone.
D. For NEW Sources - You shall keep records of all quarterly
inspections, including the following:
I. Date,place, and time of each inspection,
II. Person performing the inspection,
III. Records of the daily inlet flow rate, inlet velocity,pressure
drop, or fan amperage measurements, and
IV. Results of the inspection, including the date,time, and
duration of the corrective action period from the time the
inspection indicated a problem to the time of the indication
that the cyclone was restored to proper operation.

Permit No. 08155R10
Page 14
E. For EXISTING Sources - You shall keep records of all quarterly
inspections, including the following:
I. Date,place, and time of each inspection,
II. Person performing the inspection,
III. Records of the operation of the cyclone showing proper air
pollution control practices and manufacturer's specifications
and operating instructions were followed, if available, or
standard operating procedures developed by the facility owner
or operator were followed.
IV. Results of the inspection, including the date, time, and
duration of the corrective action period from the time the
inspection indicated a problem to the time of the indication
that the cyclone was restored to proper operation.
V. Records of weekly visual inspections of the operating cyclone,
including a record of any corrective action taken as a result of
the inspection.
vi. If daily feed production level is less than 50 tons per day,the source shall
keep daily feed production records on site. (The Average Daily Feed
Production Level is defined above.) The Notification of Compliance Status
and/or ACC report shall indicate this level in the year that the daily feed
production level is less than 50 tons per day.
vii. Records shall be in a form suitable and readily available for expeditious
review. All records shall be maintained for 5 years and shall be kept on-site
for a minimum of 2 years. Records may be kept offsite for the remaining 3
years.
viii. Per 40 CFR 63.11624(d) -Facilities that discontinue Cr and Mn after January
5, 2010 shall submit a Notification to the agency(NC DAQ)that they are no
longer subj ect to the rule (indicating an effective date). The Notification shall
include the Company's Name and Address, and a statement by a responsible
official indicating that the facility no longer uses materials that contain Cr or
Mn. This statement should also include an effective date for the termination
of use of materials that contain Cr or Mn, and the responsible official's name,
title, phone number, e-mail address and signature.

Permit No. 08155RI O
Page 15
13. 15A NCAC 2D .1111 "National Emission Standards for Hazardous Air Pollutants"- For the
Generator, Onan D970636382 (ID No. ES-016),the Permittee shall comply with all
applicable provisions, including the maintenance and recordkeeping requirements contained
in Environmental Management Commission Standard 15A NCAC 2D .1111, as promulgated
in 40 CFR 63, Subpart ZZZZ, "National Emission Standards for Hazardous Air Pollutants
(NESHAP) for Stationary Reciprocating Internal Combustion Engines (RICE)", including
Subpart A "General Provisions." The Permittee shall comply with the definition of
emergency stationary RICE in 40 CFR 63.6675 and the following stationary RICE
provisions.
a. Compliance Date - The compliance date is May 3, 2013.
b. Maintenance and Work Practices - Pursuant to 40 CFR 63.6603(a), 63.6625(e), (f),
and (h) and 63.6640(f) the Permittee shall comply with the following:
i. Change the oil and filter every 500 hours of operation or annually, whichever
comes first. The Permittee has the option to utilize an oil analysis program as
described in Section c. below in order to extend the specified oil change
requirements.
I Inspect the air cleaner every 1,000 hours of operation or annually, whichever
comes first, and replace as necessary.
iii. Inspect all hoses and belts every 500 hours of operation or annually,
whichever comes first, and replace as necessary.
iv. Operate and maintain the engine and control device (if any) according to the
manufacturer's emission related written instructions or maintenance plan
developed by the Permittee that minimizes emissions from the engine to the
extent practicable.
v, Install a non-resettable hour meter if one is not already installed.
vi. Minimize the engine's time spent at idle during startup and minimize the
engine's startup time to a period needed for appropriate and safe loading of
the engine, not to exceed 30 minutes, after which time the non-startup
emission limitations apply.
vii. If the engine is operating during an emergency and it is not possible to shut
down the engine in order to perform the management practice requirements
on the schedules required in Sections b.i.,b.ii., and b.iii., above, or if
performing the management practice on the required schedules would
otherwise pose an unacceptable risk under federal, state or local law,the
management practices can be delayed until the emergency is over or the
unacceptable risk under federal, state, or local law has abated. The
management practice shall be performed as soon as possible after the
emergency has ended or the unacceptable risk has abated. The Permittee shall
report any failure to perform the management practice on the schedule

Permit No. 08155R10
Page 16
required and the federal, state, or local law under which the risk was deemed
unacceptable.
viii. If the Permittee does not operate the engine according to the requirements in
Sections A. through C. below,then the engine will not be considered an
emergency engine under NESHAP Subpart ZZZZ and must meet all
requirements for non-emergency engines.
A. There is no time limit on the use in emergency situations.
B. The Permittee may operate the engine for any combination of the
purposes specified in Sections (i) through(iii) below for a maximum
of 100 hours per calendar year.
(i) The engine may be operated for maintenance checks and
readiness testing,provided that the tests are recommended by federal,
state or local government,the manufacturer, the vendor,the regional
transmission authority or equivalent balancing authority and
transmission operator, or the insurance company associated with the
engine.
The Permittee may petition the Division of Air Quality(DAQ)
Regional Supervisor for approval of additional hours to be used for
maintenance checks and readiness testing, but a petition is not
required if the Permittee maintains records indicating that federal,
state, or local standards require maintenance and testing of the engine
beyond 100 hours per calendar year.
(ii) The engine may operate for emergency demand response for
periods in which the Reliability Coordinator under the North
American Electric Reliability Corporation (NERC) Reliability
Standard EOP-002-3, Capacity and Energy Emergency or other
authorized entity as determined by the Reliability Coordinator has
declared an Energy Emergency Alert Level 2 as defined in the NERC
Reliability Standard EOP-002-3.
(iii) The engine may be operated for periods where there is a
deviation of voltage or frequency of 5 percent or greater below
standard voltage or frequency.

Permit No. 08155R10
Page 17
C. Pursuant to 40 CFR 63.6640(f)(4),the engine may be operated for up
to 50 hours per calendar year in non-emergency situations. The 50
hours of operation in non-emergency situations are counted as part of
the 100 hours per calendar year for maintenance and testing and
emergency demand response provided in Section b.viii.B above.
Except as provided in Sections (i) and(ii) below, the 50 hours per
year for non-emergency situations cannot be used for peak shaving or
non-emergency demand response, or to generate income for the
facility to supply power to an electric grid or otherwise supply power
as part of a financial arrangement with another entity.
(i) - Prior to May 3, 2014, the 50 hours per year for non-emergency
situations can be used for peak shaving or non-emergency demand
response to generate income for the facility, or to otherwise supply
power as part of a financial arrangement with another entity if the
engine is operated as part of a peak shaving (load management
program)with the local distribution system operator and the power is
provided only to the facility itself or to support the local distribution
system.
(ii) The 50 hours per year for non-emergency situations can be used
to supply power as part of a financial arrangement with another entity
if ALL of the following conditions are met:
(I) The engine is dispatched by the local balancing authority or
local transmission or distribution system operator.
(II) The dispatch is intended to mitigate local transmission
and/or distribution limitations so as to avert potential voltage collapse
or line overloads that could lead to the interruption of power supply in
a local area or region.
(III) The dispatch follows reliability, emergency operation or
similar protocols that follow specific NERC, regional, state,public
utility commission or local standards or guidelines.
(IV) The power is provided only to the facility itself or to
support the local transmission and distribution system.
(V) The owner or operator identifies and records the entity that
dispatches the engine and the specific NERC, regional,state,public
utility commission or local standards or guidelines that are being
followed for dispatching the engine. The local balancing authority or
local transmission and distribution system operator may keep these
records on behalf of the engine owner or operator.

Permit No. 08155R10
Page 18
ix. At all times the Permittee shall operate and maintain any affected source,
including associated air pollution control equipment and monitoring
equipment, in a manner consistent with safety and good air pollution control
practices for minimizing emissions. The general duty to minimize emissions
does not require you to make any further efforts to reduce emissions if levels
required by this standard have been achieved. Determination of whether such
operation and maintenance procedures are being used will be based on
information available to DAQ which may include, but is not limited to,
monitoring results, review of operation and maintenance procedures, review
of operation and maintenance records, and inspection of the source.
c. Oil Analysis Program- Pursuant to 40 CFR 63.6625(i),the Permittee may utilize an
oil analysis program in order to extend the oil change requirements specified in
Section b.i. above. The oil analysis must be performed at the same frequency
specified for changing the oil. If any of the limits listed below are exceeded, the
Permittee shall change the oil within two (2) business days of receiving the results of
the analysis. If the engine is not in operation when the results of the analysis are
received, then the oil must be changed within two (2) business days or before
commencing operation, whichever is later.
i. Total base number is less than 30 percent of the total base number of the oil
when new; or
ii. Viscosity of the oil has changed by more than 20 percent from the viscosity
of the oil when new; or
iii. Water content (by volume) is greater than 0.5%.
If all of the above limits are not exceeded, the Permittee is not required to change the
oil before continuing to use the engine.
d. Fuel Requirements -Per 40 CFR 63.6604(b), beginning January 1, 2015, emergency
engines that meet all the following conditions shall use diesel fuel that meets the
requirements in 40 CFR 80.510(b) for nonroad diesel fuel.
is Greater than 100 brake HP;
ii. Displacement of less than 30 liters per cylinder;
iii. Operates for the purposes specified in Section b.viii.C.ii. above or operates or
is contractually obligated to be available for more than 15 hours per calendar
year for the purposes specified in Sections b.viii.B.(ii) or b.viii.B.(iii) above.

Permit No. 08155R10
Page 19
Any existing diesel fuel purchased prior to January 1, 2015 may be used until
depleted. The diesel fuel requirements of 40 CFR 80.510(b) are shown below:
Sulfur content 15 ppm rnaximum.�������
Cetane index or A minimum cetane index of 40; or
i
!Aromatic content A maximum aromatic content of 35 volume percent.
e. Recordkegping -Pursuant to 40 CFR 63.6655(d),(e) and(f),the Permittee shall keep
records for at least five (5) years showing:
i. The engine was operated and maintained according to the manufacturer's
emission related operation and maintenance instructions or the Permittee's
maintenance plan which must provide for the maintenance and operation of
the engine in a manner consistent with good air pollution control practice for
minimizing emissions.
ii. If applicable,the parameters that are analyzed as part of the oil analysis
program,the results of the analysis, and the oil changes for the engine.
iii. The hours of operation of the engine that is recorded through the non-
resettable hour meter. The Permittee shall document how many hours are
spent for emergency operation; including what classified the operation as
emergency and how many hours are spent for non-emergency operation. If
the engine is used for purposes specified in Sections b.viii.B.(ii), b.viii.B.(iii),
or b.viii.C.(ii) above, then the Permittee shall keep records of the notification
of the emergency situation, and the date, start time and end time of the engine
�I operation for these purposes.
f. Reporting- Pursuant to 40 CFR 63.6650(h), if the engine is greater than 100 brake
HP that operates for the purposes specified in Section b.viii.C.(ii) above, or operates
or is contractually obligated to be available for more than 15 hours per calendar year
for the purposes specified in Sections b.viii.B.(ii)or b.viii.B.(iii) above, the
Permittee shall submit an annual report to the DAQ Regional Supervisor. The first
annual report shall be submitted no later than March 31, 2016 and cover the calendar
year 2015. Subsequent annual reports shall be submitted by March 31 of each year
and cover the previous calendar year.

Permit No. 08155R10
Page 20
The annual report must also be submitted electronically to EPA through the specific
NESHAP Subpart ZZZZ reporting form in the Compliance and Emissions Data
Reporting Interface (CEDRI)that is accessed through EPA's Central Data Exchange
(CDX). However, if the reporting form specific to NESHAP Subpart ZZZZ is not
available in CEDRI at the time that the report is due, the.written report shall be
submitted to EPA at the appropriate address listed in Section 63.13;
EPA Region IV
Director, Air, Pesticides and Toxics Management Division
Atlanta Federal Center
61 Forsyth Street
Atlanta, GA 30303-3104
The annual report shall contain the following information:
i. Company name and address where the engine is located.
ii. Date of the report and beginning and ending dates of the reporting period.
iii. Engine site rated horsepower and model year for each engine.
iv. Latitude and longitude of the engine in decimal degrees reported to the fifth
decimal place.
V. Hours operated for the purposes specified in Sections b.viii.B.(ii) and
b.viii.B.(iii), including the date, start time, and end time for engine operation.
vi. Number of hours the engine is contractually.obligated to be available for the
purposes specified in Sections b.viii.B.(ii)and b.viii.B.(iii).
vii. Hours spent for operation for the purpose specified in Section b.viii.C.(ii)
including the date, start time, and end time for engine operation. The report
must also identify the entity that dispatched the engine and the situation that
necessitated the dispatch of the engine.
viii. If there were no deviations from the fuel requirements in Section d. above
that apply to the engine (if any), a statement that there were no deviations
from the fuel requirements during the reporting period.
ix. If there were deviations from the fuel requirements in Section d. that apply to
the engine (if any), information on the number, duration, and cause of
deviations, and the corrective action taken.

Permit No. 08155R10
Page 21
_ 14. CONTROL AND PROHIBITION OF ODOROUS EMISSIONS -As required by 15A
NCAC 2D .1806 "Control and Prohibition of Odorous Emissions" the Permittee shall not
operate the facility without implementing management practices or installing and operating
odor control equipment sufficient to prevent odorous emissions from the facility from
causing or contributing to objectionable odors beyond the facility's boundary.
15. LIMITATION TO AVOID 15A NCAC 2Q .0501 - Pursuant to 15A NCAC 2Q .0315
"Synthetic Minor Facilities," to avoid the applicability of 15A NCAC 2Q .0501 "Purpose of
Section and Requirement for a Permit," as requested by the Permittee, facility-wide
emissions shall be less than the following:
+arreW r
FTF �y 6gs�
gga t
PM10 100
a. Operations Restrictions - To ensure emissions do not exceed the limitations above,
the following restrictions shall apply:
i. Throughput of the overall milling process shall not exceed 1,600,000 tons per
consecutive 12-month period;
I Throughput of the Grain Drying Process (ID No. ES-018) shall not exceed
200,000 tons per consecutive 12-month period; and
iii. Throughput of the bagging operation (ID No. ES-022) shall not exceed
50,000 tons per consecutive 12-month period.
b. Recordkeeping Requirements
i. The Permittee shall record monthly and total annually the following:
A. Overall milling process throughput, tons
B. Grain Drying System(ID No. ES-018) throughput,tons
C. Bagging Operation (ID No. ES-22) throughput,tons

Permit No. 08155R10
Page 22
16. AVOIDANCE CONDITION FOR AREA SOURCES SUBJECT TO 40 CFR 63 Subpart
JJJJJJ(6J)- In accordance with 15A NCAC 2Q .0317, the Permittee is avoiding
applicability of 40 CFR 63 Subpart JJJJJJ (6J) "Industrial, Commercial, and Institutional
Boilers Area Sources." The Permittee is permitted to operate a natural gas 1 No. fuel oil-fired
boiler(ID Nos. ES-013 and ES-014). Per 40 CFR 63.11195(e), these/this source(s) is/are
exempt from this Subpart because they are defined as gas-fired boiler(s) in 40 CFR
63.11237. In order to maintain this exemption,the Permittee is allowed to fire liquid fuel
only during periods of gas curtailment, gas supply interruptions, startups, or for periodic
testing on liquid fuel (periodic testing not to exceed a combined total of 48 hours during any
calendar year).
a. The Permittee shall maintain records that document the time periods when liquid fuel
is fired and the reasons the liquid fuel is fired.
b. If the Permittee fires liquid fuel for reasons other than gas curtailment, gas supply
interruptions, startups, or for periodic testing on liquid fuel,the Permittee is no
longer exempt from Subpart JJJJJJ(6J). As required by 40 CFR 62.11225(g), the
Permittee must provide notice within 30 days of the fuel switch. The notification
must identify:
i. The name of the owner or operator of the affected source, the location of the
source,the boiler(s)that have switched fuels, and the date of the notice.
ii. The date upon which the fuel switch occurred.
As required by 40 CFR 63.11210(h), the Permittee must demonstrate
compliance within 180 days of the effective date of the fuel switch.
i

Permit No. 08155R10
Page 23
_ 17. TOXIC AIR POLLUTANT EMISSIONS LIMITATION REQUIREMENT -Pursuant to
15A NCAC 2Q .0711 "Emission Rates Requiring a Permit," for each of the below listed
toxic air pollutants (TAPs),the Permittee has made a demonstration that facility-wide actual
emissions, where one or more emission release points are obstructed or non-vertically
oriented, do not exceed the Toxic Permit Emission Rates(TPERs) listed in 15A NCAC 2Q
.0711(a). The facility shall be operated and maintained in such a manner that emissions of
any listed TAPs from the facility, including fugitive emissions, will not exceed TPERs listed
in 15A NCAC 2Q .0711(a).
a. A permit to emit any of the below listed TAPs shall be required for this facility if
actual emissions from all sources will become greater than the corresponding
TPERs.
b. PRIOR to exceeding any of these listed TPERs,the Permittee shall be responsible
for obtaining a permit to emit TAPs and for demonstrating compliance with the
requirements of 15A NCAC 2D .1100 "Control of Toxic Air Pollutants
c. In accordance with the approved application, the Permittee shall maintain records of
operational information demonstrating that the TAP emissions do not exceed the
TPERs as listed below:
tom_- ...... .- -
q 1rqpW*4� +
Acetaldehyde (75-07-0) 6.8
Acrolein (107 02-8) 0.02
A ni mmoa(as NH3) (7664-41-7) 0.68
Benzene (71-43-2) - 8.1 -
.. ...
Benzo(a)pyrene(Component of
83329/POMTV& 56553/7PAH) 2.2
(50-32-8)
....... I
Formaldehyde (50-00-0) 0.04
Hexane,n- (110-54-3) 23
_ --- .� - _
(Toluene (108-88 3) �W 98 ..14.4

Permit No. 08155R10
Page 24
B. GENERAL CONDITIONS AND LIMITATIONS
1. In accordance with G.S. 143-215.108(c)(1), TWO COPIES OF ALL DOCUMENTS,
REPORTS, TEST DATA, MONITORING DATA,NOTIFICATIONS, REQUESTS FOR
RENEWAL,-AND ANY OTHER INFORMATION REQUIRED BY THIS PERMIT shall
be submitted to the:
Regional Supervisor
North Carolina Division of Air Quality
Fayetteville Regional Office
Systel Building
225 Green Street, Suite 714
Fayetteville, NC 28301-5094
910-433-33 00
For identification purposes, each submittal should include the facility name as listed on the
permit, the facility identification number, and the permit number.
2. RECORDS RETENTION REQUIREMENT - In accordance with 15A NCAC 2D .0605,
any records required by the conditions of this permit shall be kept on site and made available
to DAQ personnel for inspection upon request. These records shall be maintained in a form
suitable and readily available for expeditious inspection and review. These records must be
kept on site for a minimum of 2 years,unless another time period is otherwise specified.
3. ANNUAL FEE PAYMENT - Pursuant to 15A NCAC 2Q .0203(a),the Permittee shall pay
the annual permit fee within 30 days of being billed by the DAQ. Failure to pay the fee in a
timely manner will cause the DAQ to initiate action to revoke the permit.
4. EQUIPMENT RELOCATION - In accordance with 15A NCAC 2Q .0301, a new air permit
shall be obtained by the Permittee prior to establishing, building, erecting, using, or
j operating the emission sources or air cleaning equipment at a site or location not specified in
this permit.
5. REPORTING REQUIREMENT - In accordance with 15A NCAC 2Q .0309, any of the
following that would result in previously unpermitted, new, or increased emissions must be
reported to the Regional.Supervisor, DAQ:
a. changes in the information submitted in the application regarding facility emissions;
b. changes that modify equipment or processes of existing permitted facilitie
s; or
c. changes in the quantity or quality of materials processed.
If appropriate, modifications to the permit may then be made by the DAQ to reflect any
necessary changes in the permit conditions. In no case are any new or increased emissions
allowed that will cause a violation of the emission limitations specified herein.

Permit No. 08155R10
Page 25
6. In accordance with 15A NCAC 2Q .0309,this permit is subject to revocation or
modification by the DAQ upon a determination that information contained in the application
or presented in the support thereof is incorrect, conditions under which this permit was
granted have changed, or violations of conditions contained in this permit have occurred. In
accordance with G.S. 143-215.108(c)(1), the facility shall be properly operated and
maintained at all times in a manner that will effect an overall reduction in air pollution.
Unless otherwise specified by this permit, no emission source may be operated without the
concurrent operation of its associated air cleaning device(s) and appurtenances.
7. In accordance with G.S. 143-215.108(c)(1),this permit is nontransferable by the Permittee.
Future owners and operators must obtain a new air permit from the DAQ.
8. In accordance with G.S. 143-215.108(c)(1), this issuance of this permit in no way absolves
the Permittee of liability for any potential civil penalties which may be assessed for
violations of State law which have occurred prior to the effective date of this permit.
9. In accordance with G.S. 143-215.108(c)(1), this permit does not relieve the Permittee of the
responsibility of complying with all applicable requirements of any Federal, State, or Local
water quality or land quality control authority.
10. In accordance with 15A NCAC 2D .0605, reports on the operation and maintenance of the
facility shall be submitted by the Permittee to the Regional Supervisor, DAQ at such
intervals and in such form and detail as may be required by the DAQ. Information required
in such reports may include, but is not limited to,process weight rates, firing rates, hours of
operation, and preventive maintenance schedules.
11. A violation of any term or condition of this permit shall subject the Permittee to enforcement
pursuant to G.S. 143-215.114A, 143-215.114B, and 143-215.114C, including assessment of
civil and/or criminal penalties.
12. Pursuant to North Carolina General Statute 143-215.3(a)(2), no person shall refuse entry or .
access to any authorized representative of the DAQ who requests entry-or access for
purposes of inspection, and who presents appropriate credentials, nor shall any person
obstruct, hamper, or interfere with any such representative while in the process of carrying
out his official duties. Refusal of entry or access may constitute grounds for permit
revocation and assessment of civil penalties.
13. In accordance with G.S. 143-215.108(c)(1),this permit does not relieve the Permittee of the
responsibility of complying with any applicable Federal, State, or Local requirements
governing the handling, disposal, or incineration of hazardous solid or medical wastes
g g g� p >
including the Resource Conservation and Recovery Act(RCRA) administered by the
Division of Waste Management.
14. PERMIT RETENTION REQUIREMENT - In accordance with 15A NCAC 2Q .0110,the
Permittee shall retain a current copy of the air permit at the site. The Permittee must make
available to personnel of the DAQ,upon request,the current copy of the air permit for the
site.

Permit No. 08155R10
Page 26
15. CLEAN AIR ACT SECTION 112 r REQUIREMENTS - Pursuant to 15A NCAC 2D .2100
"Risk Management Program," if the Permittee is required to develop and register a risk
management plan pursuant to Section I I2(r) of the Federal Clean Air Act, then the
Permittee is required to register this plan with the USEPA in accordance with 40 CFR Part
68.
16. PREVENTION OF ACCIDENTAL RELEASES - GENERAL DUTY- Pursuant to Title I
Part A Section I I2(r)(1) of the Clean Air Act "Hazardous Air Pollutants -Prevention of
Accidental Releases - Purpose and General Duty," although a risk management plan may not
be required, if the Permittee produces, processes, handles, or stores any amount of a listed
hazardous substance,the Permittee has a general duty to take such steps as are necessary to
prevent the accidental release of such substance and to minimize the consequences of any
release. This condition is federally-enforceable only.
17. GENERAL EMISSIONS TESTING AND,REPORTING REQUIREMENTS - If emissions
testing is required by this permit, or the DAQ, or if the Permittee submits emissions testing
to the DAQ in support of a permit application or to demonstrate compliance,the Permittee
shall perform such testing in accordance with 15A NCAC 2D .2600 and follow all DAQ
procedures including protocol approval, regional notification, report submittal, and test
results approval.
Permit issued this the 4ch of March, 2015.
NORTH CAROLINA ENVIRONMENTAL MANAGEMENT COMMISSION
Steven F. Vozzo
Regional Supervisor
By Authority of the Environmental Management Commission
Air Permit No. 08155RI0

ATTACHMENT to Permit No. 08155R10, March 4, 2015
Insignificant I Exempt Activities
F ��*" :✓f_ ..".�.T y-'"" . h �
�` � i # l �V aR ', ;5 is
x
r,
IES-101 - Storage Silos 2Q .0102 (c)(2)(E)(i.) No -N Yes _m
IES-102 - Storage Silos 2Q .0102 (c)(2)(E)(i) No Yes
FIES-103 - .Storage Silos 2Q .0102 (c)(2)(E)(i) .....No... I Yes
IES-104 - Storage Silos 2Q .0102 (c)(2)(E)(i) F No Yes
IES-105a- Storage Silos 7 2Q .0102 (c)(2)(E)(i) No �m � Yes
F IES-106 - Storage Silos 2Q .0102 (c)(2)(E)(i) No —Yes
IES-107 - Storage Silos 2Q .0102 (c)(2)(E)(i) j No Yes
F— IES-108 - Storage Silos 2Q .0102 {c)(2){E)(i) No Yes
1. Because an activity is exempted from being required to have a permit or permit modification
does not mean that the activity is exempted from an applicable requirement or that the owner
or operator of the source is exempted from demonstrating compliance with any applicable
requirement.
2. When applicable, emissions from stationary source activities identified above shall be
included in determining compliance with the permit requirements for toxic air pollutants
under 15A NCAC 2D .1100 "Control of Toxic Air Pollutants" or 2Q .0711 "Emission Rates
Requiring a Permit."
i
i

0