AQ_F_1900104_20150716_PRMT_Permit

A
��
����
NCDENR
North Carolina Department of Environment and Natural Resources
Pat McCrory Donald R. van der Vaart
Governor Secretary
July 16, 2015
Mr. Blake Arnett
Plant Manager
3M Industrial Mineral Products
3M Roofing Granule Manufacturing Operations
4191 Highway 87 South
Moncure, North Carolina 27559
Dear Mr. Arnett:
SUBJECT: Air Quality Permit No. 09006T05
Facility ID: 1900104
3M Roofing Granule Manufacturing Operations
Moncure, North Carolina
Chatham County
Fee Class: Title V
In accordance with your completed Air Quality Permit Application for a minor modification of a
Title V permit received July 9, 2015, we are forwarding herewith Air Quality Permit No. 09006T05 to
3M Roofing Granule Manufacturing Operations, 4191 Highway 87 South, Moncure, North Carolina,
authorizing the construction and operation, of the emission source(s) and associated air pollution control
device(s) specified herein. Additionally, any emissions activities determined from your Air Quality Permit
Application as being insignificant per 15A North Carolina Administrative Code 2Q .0503(8) have been
listed for informational purposes as an "ATTACHMENT." Please note the requirements for the annual
compliance certification are contained in General Condition P in Section 3. The current owner is
responsible for submitting a compliance certification for the entire year regardless of who owned the
facility during the year.
As the designated responsible official it is your responsibility to review, understand, and abide by all
of the terms and conditions of the attached permit. It is also your responsibility to ensure that any person
who operates any emission source and associated air pollution control device subject to any term or
condition of the attached permit reviews, understands, and abides by the condition(s) of the attached
permit that are applicable to that particular emission source.
If any parts, requirements, or limitations contained in this Air Quality Permit are unacceptable to
you, you have the right to request a formal adjudicatory hearing within 30 days following receipt of this
permit, identifying the specific issues to be contested. This hearing request must be in the form of a
written petition, conforming to NCGS (North Carolina General Statutes) 15013-23, and filed with both the
Office of Administrative Hearings, 6714 Mail Service Center, Raleigh, North Carolina 27699-6714 and
the Division of Air Quality, Permitting Section, 1641 Mail Service Center, Raleigh, North Carolina
27699-1641.
1641 Mail Service Center,Raleigh,North Carolina 27699-1641
Phone:[phone] Internet:www.ncdenr.gov
An Equal Opportunity 1 Affirmative Action Employer—Made in part with recycled paper

Mr. Arnett
July 16,2015
Page 2
The form for requesting a formal adjudicatory hearing may be obtained upon request from the Office of
Administrative Hearings. Please note that this permit will be stayed in its entirety upon receipt of the
request for a hearing. Unless a request for a hearing is made pursuant to NCGS 15013-23, this Air Quality
Permit shall be final and binding 30 days after issuance.
You may request modification of your Air Quality Permit through informal means pursuant to
NCGS 15013-22. This request must be submitted in writing to the Director and must identify the
specific provisions or issues for which the modification is sought. Please note that this Air Quality
Permit will become final and binding regardless of a request for informal modification unless a request
for a hearing is also made under NCGS 15013-23.
The construction of new air pollution emission source(s) and associated air pollution control
device(s), or modifications to the emission source(s) and air pollution control device(s) described in
this permit must be covered under an Air Quality Permit issued by the Division of Air Quality prior to
construction unless the Permittee has fulfilled the requirements of GS 143-215-108A(b) and received
written approval from the Director of the Division of Air Quality to commence construction. Failure to
receive an Air Quality Permit or written approval prior to commencing construction is a violation of
GS 143-215.108A and may subject the Permittee to civil or criminal penalties as described in GS 143-
215.114A and 143-215.114B.
Increment tracking does not apply to this minor modification. Although Chatham County's
minor source baseline for NOx, PM10 and S02 has been triggered; there are no emissions increases or
decreases associated with this change.
This Air Quality Permit shall be effective from July 16, 2015 until October 31, 2015, is
nontransferable to future owners and operators, and shall be subject to the conditions and limitations as
specified therein. Please note the attached summary table, which outlines the changes made to the
permit.
Should you have any questions concerning this matter,please contact Ms. Judy Lee, E.I.T., at(919)
707-8729 or Judy.Leenu,ncdenr.gov .
Sincerely yours,
William D. Willets, P. E., Chief, Permitting Section
Division of Air Quality,NCDENR
Enclosure
c: Heather Ceron, EPA Region 4
Raleigh Regional Office
Central Files
Connie Horne(Cover Letter ONLY)

ATTACHMENT 1 to cover letter of Permit No.09006T05 Page 1 of 2
3M Roofing Granule Manufacturing Operations
Insignificant Activities under 15A NCAC 2Q .0503(8)
Emission Source Control Device Control Device
ID No. Emission Source Description ID No. Description___
Sources at Crushing and Screening Plant
IS Vacuum system for building 13 crushing and screening N/A N/A
IS-2 Crusher building unit heater exhaust fan#3 N/A N/A
IS-3 Crusher building exhaust fan#1 N/A N/A
IS-4 Crusher building exhaust fan#2 N/A N/A
IS-5 Crusher building restroom exhaust fan N/A N/A
IS-6 Screening building unit heater exhaust vent N/A N/A
IS-7 Screening building exhaust fan#1 N/A N/A
IS-8 Screening building restroom exhaust fan N/A N/A
IS-9 Screening building exhaust fan#2 N/A N/A
IS-ESCPBHWC Dust conveyor N/A N/A
IS-F123 Enclosed stock pile to bottom loadout feed pile N/A N/A
IS-F56A Grade loading hopper N/A N/A
IS-F5613 Grade silo loadout to ground storage N/A N/A
Sources at Coloring Plant
IS-10 Coloring building exhaust fan#1 N/A N/A
IS-11 Coloring building exhaust fan#2 N/A N/A
IS-12 Coloring building exhaust fan#3 N/A N/A
IS-13 Coloring building exhaust fan#4 N/A N/A
IS-14 Coloring building exhaust fan#5 N/A N/A
IS-15 Coloring building exhaust fan#6 N/A N/A
IS-16 Coloring building exhaust fan#7 N/A N/A
IS-17 Coloring building exhaust fan#8 N/A N/A
IS-18 Finished granule storage building exhaust fan#1 N/A N/A
IS-19 Finished granule storage building exhaust fan#2 N/A N/A
IS-20 Finished granule storage building exhaust fan#3 N/A N/A
IS-21 Finished granule storage building exhaust fan#4 N/A N/A
IS-22 Tank farm building exhaust fan N/A N/A
IS-23 Warehouse area unit heater exhaust fan N/A N/A
IS-27 Warehouse area restroom exhaust fan N/A N/A
IS-A1 B3 liquid clay tank(20,000 gallon capacity) N/A N/A
IS-A2 Albion clay tank(20,000 gallon capacity) N/A N/A
IS-A3 Sodium silicate tank(20,000 gallon capacity) N/A N/A
IS-A4 Sodium silicate tank(20,000 gallon capacity) N/A N/A
IS-A5 Magnesium chloride tank(6,000 gallon capacity) N/A N/A
IS-A6 Slate oil tank(20,000 gallon capacity) N/A N/A
IS-A8 Hold tank(500 gallon capacity) N/A N/A
IS-A10 Mix tank(325 gallon capacity) N/A N/A
IS-Al2 Mix tank(325 gallon capacity) N/A N/A
IS-A 13 Hold tank(500 gallon capacity) N/A N/A
IS-A14 Prinlin tank(550 gallon capacity) N/A N/A
IS-A15 Sludge tank(5,000 gallon capacity) N/A N/A
IS-A16 Adhesion promoter tank(10,000 gallon capacity) N/A N/A

ATTACHMENT 1 to cover letter of Permit No.09006T05 Page 2 of 2
3M Roofing Granule Manufacturing Operations
Emission Source Control Device Control Device
ID No. Emission Source Description ID No. Description
IS-A17 Day tank(adhesion promoter)(400 gallon capacity) N/A N/A
Raw granule transfer conveyor(RTC)/conveyor No.27/
IS-ES CPA] load-in to raw granule transfer conveyor No.4 (RCTC4)/ N/A N/A
conveyor No.46
IS-ES CPA2 Raw granule bin No. 3 (RGB3) N/A N/A
IS-ES CPA3 Rerun bin No. 3 (RRB3) N/A N/A
IS-ESCP1 Rerun conveyor N/A N/A
IS-ESCP2 Consolidation conveyor N/A N/A
IS-ESCP3 Line 2 rerun/headlap conveyor N/A N/A
IS-ESCP4 Headlap/consolidation conveyor N/A N/A
IS-ESCPI5A Rerun elevator No. 1,two pickups N/A N/A
IS-ESCP 15B Rerun elevator No.2,two pickups N/A N/A
IS-ESCP43 Product loadout conveyor N/A N/A
IS-ESCPC-8 Consolidation elevator N/A N/A
IS-ESCPLI-8 Line 1 product elevator N/A N/A
IS-ESCPL2-8 Line 2 product elevator N/A N/A
IS-ESCPVF 16A Rerun bin No. 1 N/A N/A
IS-ESCPVFI6B Rerun bin No.2 N/A N/A
Sources Located Outside
IS-A7 Reclaim water tank(32,000 gallon capacity) N/A N/A
IS-A9 Wastewater tank(17,000 gallon capacity) N/A N/A
IS-Al 1 Water holding tank(1,025 gallon capacity) N/A N/A
IS-FP** One diesel-fired emergency fire water pump(290 hp) N/A N/A
MACT ZZZZ [constructed prior to June 12,2006]
Sources in Shipping Area
IS-FCP34 Waste bin load N/A N/A
IS-FCP35 Waste bin unload N/A N/A
IS-FCP363940 100 enclosed storage bins N/A N/A
IS-FCP45 Enclosed rail car unloading N/A N/A
IS-FCP46 Enclosed rail car unloading N/A N/A
IS-FCP47 Enclosed rail car unloading N/A N/A
Sources in Office Area
IS-24 Office area unit heater exhaust fan N/A N/A
IS-25 Office area exhaust fan N/A N/A
IS-26 Office area restrooms exhaust fan N/A N/A
IS-28 Office area restrooms exhaust fan#1 N/A N/A
IS-29 Office area restrooms exhaust fan#2 N/A N/A
**-Compliance date of May 3,2013
1. Because an activity is insignificant does not mean that the activity is exempted from an applicable requirement or that
the owner or operator of the source is exempted from demonstrating compliance with any applicable requirement.
2. When applicable, emissions from stationary source activities identified above shall be included in determining
compliance with the permit requirements for toxic air pollutants under 15A NCAC 2D .l 100 "Control of Toxic Air
Pollutants"or 2Q.0711 "Emission Rates Requiring a Permit".
3. For additional information regarding the applicability of GACT, MACT, and NSPS for permit exempt/insignificant
activities see the NC DAQ website: http://daq.state.nc.us/perniits/insig/. Hard copies of the regulatory requirements
will be provided by the regional office upon request.

ATTACHMENT 2 to cover letter of Permit No.09006T05 Page 1 of 1
3M Roofing Granule Manufacturing Operations
The following table describes the modifications to the current permit as part of the modification process.
Old New Condition/
Page(s) Page(s) Item Description of Change(s)
• Change the issuance/effective dates of the permit;
• Change the application number and complete date;
Global N/A • Change permit revision number to T05;
• Changed Greg Worley to Heather Ceron; and
• Updated shell language as necessary
Cover Letter N/A Updated RO per 113EAM
Added increment tracking information
Insignificant No change
Activities
Attachments
Table of
Updated per this permit modification
Changes
5 5 Equipment List Added Maximum Design Capacity of 60 tons per hour to
ESC23C description and 24"to description of conveyor
Added reference to emission limits for affected facility
(screening operations, screen feeders, storage bins, elevators,
12 12 2.1-A.2.a.&b. etc.)that commenced construction,modification, or
reconstruction on or after April 22, 2008 and exemptions for
Like-kind Replacement units.
-- 13 2.1-A.21. Added Like-kind Replacement reporting language
33 -41 31 -40 Section 3 Update General Conditions to current Version 3.6

State of North Carolina,
Department of Environment, • •
and Natural Resources " ���
Division of Air Quality
NCDENR
AIR QUALITY PERMIT
Permit No. Replaces Permit No.(s) Effective Date Expiration Date
09006T05 09006T04 July 16, 2015 October 31, 2015
Until such time as this permit expires or is modified or revoked, the below named Permittee is permitted to
construct and operate the emission source(s) and associated air pollution control device(s) specified herein, in
accordance with the terms, conditions, and limitations within this permit. This permit is issued under the
provisions of Article 21 B of Chapter 143, General Statutes of North Carolina as amended, and Title 15A North
Carolina Administrative Codes(15A NCAC), Subchapters 2D and 2Q, and other applicable Laws.
Pursuant to Title 15A NCAC, Subchapter 2Q, the Permittee shall not construct, operate, or modify any emission
source(s) or air pollution control device(s) without having first submitted a complete Air Quality Permit
Application to the permitting authority and received an Air Quality Permit, except as provided in this permit.
Permittee: 3M Industrial Mineral Products
3M Roofing Granule Manufacturing Operations
Facility ID: 1900104
Facility Site Location: 4191 Highway 87 South
City, County, State, Zip: Moncure, Chatham County, N.C. 27559
Mailing Address: 4191 Highway 87 South
City, State, Zip: Moncure, Chatham County, N.C. 27559
Application Number: 1900104.13A & Amendment
Complete Application Date: December 11, 2013 & July 9, 2015
Primary SIC Code: 3295
Division of Air Quality, Raleigh Regional Office
Regional Office Address: 3800 Barrett Drive
Raleigh, NC 27609
Permit issued this the 16"' day of July, 2015
William D. Willets, P. E., Chief, Permitting Section
Division of Air Quality,NCDENR
By Authority of the Environmental Management Commission

Table of Contents
SECTION 1: PERMITTED EMISSION SOURCE(S)AND ASSOCIATED AIR POLLUTION
CONTROL DEVICE(S) AND APPURTENANCES
SECTION 2: SPECIFIC LIMITATIONS AND CONDITIONS
2.1 - Emission Source(s) Specific Limitations and Conditions
(Including specific requirements,testing, monitoring, recordkeeping, and reporting
requirements)
2.2 - Multiple Emission Source(s) Specific Limitations and Conditions
(Including specific requirements, testing, monitoring, recordkeeping, and reporting
requirements)
SECTION 3: GENERAL PERMIT CONDITIONS
ATTACHMENTS
ATTACHMENT I...... List of Acronyms

Permit No. 09006T05
Page 3
SECTION 1 - PERMITTED EMISSION SOURCE(S) AND ASSOCIATED AIR
POLLUTION CONTROL DEVICE(S) AND APPURTENANCES
The following table contains a summary of all permitted emission sources and associated air pollution control devices and appurtenances:
Emission Source Control
ID No. Emission Source Description Device ID Control Device Description
No.
Crushing and Screening Plant
ES 16-A Dryer and G crusher conveyor No.9 (G crusher to
NSPS 000 screens No. 2 and No. 3 feed bin
ES32.1 L crusher product conveyor No. 17,two pickups(M
NSPS 000 feed transfer bin and L crusher No. 1 to M screen
feed bin)
ES 123 Plant feed conveyor No. 1 (feed pile to surge bin)
NSPS 000
ES412 Surge bin
NSPS 000
ES607.1 Feed conveyor No. 2(surge bin to C crusher)
NSPS 000
ES607.2 C crusher
NSPS 000
ES2327A G crusher feed bin No. 1 Crusher baghouse No. 1 (6,500
NSPS 000 CDB 1 square feet of filter area)
ES2426.1 G crusher feed conveyor No. 8A(G crusher feed bin
NSPS 000 No. 1 to G crusher No. 1)
ES2426.2 G crusher No. 1
NSPS 000
ES3031 M feed transfer bin
NSPS 000
ES3941
NSPS 000 L crusher bin No. 1
ES4347.1 L crusher feed conveyor No. 16A (L crusher feed bin
NSPS 000 to L crusher)
ES4347.2 L crusher
NSPS 000
ESC23A.1 Conveyor No. 23A(baghouse hopper screw
NSPS 000 conveyor to dust conveyor No. 23B)
ES32A L crusher product conveyor No. 17(L crushers to
NSPS 000 conveyor No. 18A)
ES32B Conveyor No. 18A(L crusher product conveyor No.
NSPS 000 17 to live M screens feed bin)
ES340-A Live M screens feed bin,two pickups
NSPS 000
ES 1721A D screen bin No.2
NSPS 000 CDB2 Screen baghouse No. 1 (11,750
ES 1721B D screen No. 2 feeder square feet of filter area)
NSPS 000
ES 1721C D screen No.2
NSPS 000
ES 1721D G crusher bin feed conveyor No. 5 (D screen No.2
NSPS 000 to G crusher bins)
ES 1721E L circuit new feed conveyor No. 13 (D screen No. 2
NSPS 000 to M transfer bin)

Permit No. 09006T05
Page 4
Emission Source Control
ID No. Emission Source Description Device ID Control Device Description
No.
Crushing and Screening Plant(continued)
ES3537A
NSPS 000 M screen No. 1
ES3537B
NSPS 000 M screen No. 2
ES3537C M screen No. 3
NSPS 000
ES3537D L feed bin conveyor No. 14,three pickups(M
NSPS 000 screens to L crusher bins
ES3537E Grade collecting conveyor No. 19,three pickups(M
NSPS 000 screens Nos. 1,2,and 3 to M screens Nos.4,5,and
6)
ES3537F Waste conveyor No. 21,three pickup points(M
NSPS 000 screens to waste bin)
913A CDB2 Screen baghouse No. 1 (11,750
ES8
NS 9 3A D screen bin No. 1 (continued) square feet of filter area)
ES8913B D screen No. 1 feeder
NSPS 000
ES8913C D screen No. 1
NSPS 000
ES8913D Undersize conveyor No.3(D screen No. 1 to dryer
NSPS 000 feed conveyor No. 7)
ES8913E C bin feed conveyor No.4(D screen No. 1 to C
NSPS 000 crusher bin)
ES8913F Dryer feed conveyor No. 7 (undersize conveyor No.
NSPS 000 3 to dryer)
ESC3 Product conveyor No. 3 (C crusher to D screen bin
NSPS 000 No. 1)
ESC23A.2 Conveyor No.23A(baghouse hopper screw Dryer baghouse(12,300 square
NSPS 000 conveyor to dust conveyor No.23B)
CDB3 feet of filter area
CDC 1 Dryer cyclone(eight feet in
ES 1415 diameter)in series with
NSPS UUU One natural gas-fired dryer
CDB3 Dryer baghouse(12,300 square
feet of filter area)
ES 16-13 Dryer and G crusher product conveyor No. 9 (G
NSPS 000 crusher to screens No. 2 feed bin)
ES33A Conveyor No. 18A(conveyor No. 17 to conveyor
NSPS 000 No. 1813)
ES33B Conveyor No. 18B(conveyor No. 18A to live M
NSPS 000 feed bin)
ES340-B Live M feed bin two pickups
NSPS 000 CDB4 Screen baghouse No. 2 (9,000
ES 1822A square feet of filter area)
NSPS 000 D screen bin No. 3
ES 1822B D screen feeder No. 3
NSPS 000
ES1822C
NSPS 000 D screen No.3
ES 1822D Feed conveyor No.5,two pickups(D screens Nos.2
NSPS 000 and 3 to G crusher bin)

Permit No. 09006T05
Page 5
Emission Source Control
ID No. Emission Source Description Device ID Control Device Description
No.
Crushing and Screening Plant(continued)
ES3537G
NSPS 000 M screen No.4
ES3537H
NSPS 000 M screen No. 5
ES3537I
NSPS 000 M screen No. 6
ES3537J L crusher feed bin conveyor No. 14,three pickups CD134 Screen baghouse No.2(9,000
NSPS 000 (M screens to L crusher) (continued) square feet of filter area)
ES3537K Grade collecting conveyor No. 19,three pickup
NSPS 000 points(M screens to grade silos)
ES3537L Waste conveyor No. 21,three pickups(M screen to
NSPS 000 waste bin)
ESC23C 24"Dust conveyor No.23C(60 tons per hour
NSPS 000 maximum design capacity;baghouse hopper to dust
elevator)
ES 16-C Dryer and G crusher product conveyor No. 9 (G
NSPS 000 crusher to screens No.2 feed bin)
ES32.2 L crusher product conveyor No. 17(L crushers and
NSPS 000 M feed transfer bin to M screen feed bin)
ES38 Conveyor No. 14(M screens to conveyor No. 14A)
NSPS 000
ES39 Conveyor No. 14A(conveyor No. 14 to L crusher
NSPS 000 feed bins)
ES2327 G crusher bin No. 2
NSPS 000
ES2327B Feed conveyor No. 6(D screens to G crusher bins)
NSPS 000
ES2729.1 G crusher feed conveyor No. 88(G crusher bin to G CDBS Crusher baghouse No.2(5,250
NSPS 000 crusher) square feet of filter area)
ES2729.2 G crusher No.2
NSPS 000
ES4042
NS 0 2 Feed conveyor No. 14A to L crusher bin No. 2
ES4043
NSPS 000 L crusher bin No. 2
ES4044 Feed conveyor No. 16B to L crusher No.2
NSPS 000
ES4448.1 L crusher feed conveyor No. 16B
NSPS 000
ES4448.2 L crusher No.2
NSPS 000
ES23C Dust conveyor No. 23C(baghouse hopper loadout to
NSPS 000 dust elevator)
ES49A Grade collection conveyor No. 19 (M screens to
NSPS 000grade bucket elevator) CD136 Grade silo baghouse(5,250
ES49B Grade bucket elevator,two pickups(grade collecting square feet of filter area)
NSPS 000 conveyor No. 19 to grade transfer conveyor No. 20)
ES50 Grade transfer conveyor No.20,two pickups(grade
NSPS 000 bucket elevator to grade silos)

Permit No. 09006T05
Page 6
Control
Emission Source Emission Source Description Device ID Control Device Description
ID No. No.
ES57 Grade silo conveyor No. 26,three pickups(grade
NSPS 000 silos to bin discharge bucket elevator
Crushing and Screening Plant(continued)
ES58 Grade transfer conveyor No.27(bin discharge
NSPS 000 elevator to coloring plant)
ES59 Bin discharge bucket elevator No.4,two pickups
NSPS 000
ES5155A CDB6 Grade silo baghouse(5,250
NSPS 000 Grade silo No. 1
(continued) square feet of filter area)
ES5155B
NSPS 000 Grade silo No. 2
ES5155C
NSPS 000 Grade silo No. 3
ES63A Dust conveyor No. 23C(hoppers for screens,grade
NSPS 000 silo,and waste ba houses to dust elevator)
ES63B Dust elevator,two pickups
NSPS 000
ES68A
NSPS 000 Waste conveyor No. 21
ES68B Waste elevator,two pickups CDB7 Waste handling baghouse
NSPS 000 (2,750 square feet of filter area)
ES6466 Dust bin
NSPS 000
ES6466SC Dust bin screw conveyor(waste handling baghouse
NSPS 000 hopper to pugmill)
ES6970 Waste bin
NSPS 000
ESA1 D screen No.4 assembly(includes the vibrator)
NSPS 000
ESA5 Load-in to conveyor No. 18C
NSPS 000
ESA6 Line 3 live M feed bin CDB 16 Screen baghouse No.3(9,000
NSPS 000 square feet of filter area)
ESA7 Line 3 M screen assemblies
NSPS 000
ESA11 Screen baghouse No. 3 ash loadout
NSPS 000
ESA2 G bin feed conveyor No.6 loadout to bin feed
NSPS 000 conveyor No. 6A
ESA3 G feed bin No. 3
NSPS 000
ESA4
NSPS 000 G crusher No.3 CDB 17 Crusher baghouse No.3(6,500
ESA8 Feed bin No. 3 square feet of filter area)
NSPS 000
ESA9
NSPS 000 L crusher No.3
ESA12 Crusher baghouse No.3 ash loadout
NSPS 000
F61 Enclosed dust conveyor No.23B (dust conveyor No. N/A N/A
NSPS 000 23A to transfer conveyor No.23C)

Permit No.09006T05
Page 7
Emission Source Control
ID No. Emission Source Description Device ID Control Device Description
No.
72 Enclosed waste stacker conveyor No. 25 with wet N/A N/A
IFNSPS
000 suppression(pugmill to outside storage)
Crushing and Screening Plant(continued)
F6771 Enclosed pugmill with wet suppression(dust and N/A N/A
NSPS 000 wasteprocessing)
FWP Waste pile N/A N/A
Coloring Plant
ESCP I012A Headlap bin
ESCP1012B Transfer conveyor No.27(grade silos to headlap and
raw granule bins)
ESCP 1012C Raw granule bin No. 1
CDB8 Raw granule baghouse(5,750
ESCP 1012D Raw granule bin No. 2 square feet of filter area)
ESCPPFCI Line I dryer feed conveyor,two pickups(line 1 raw
granule and rerun bins to dryer)
ESCPPFC2 Line 2 dryer feed conveyor,two pickups(line 2 raw
granule and rerun bins to dryer)
ESCPPHI One natural gas- Line 1 dryer baghouse(7,111
NSPS UUU fired dryer,line 1 CDB9 square feet of filter area)
ESCPPH2 Line 2 dryer baghouse(7,111
NSPS UUU One natural gas-fired dryer,line 2 CDB 10 square feet of filter area)
ESCPMI Mixer,line 1 CDB11 Line 1 mixer baghouse(2,889
CAM square feet of filter area)
ESCPM2 Mixer,line 2 CDB 12 Line 2 mixer baghouse(2,889
CAM square feet of filter area)
ESCPK 1 One natural gas-fired kiln,line I CDB 13 Line 1 kiln baghouse(11,111
CAM square feet of filter area)
ESCPK2 One natural gas-fired kiln,line 2 CDB 14 Line 2 kiln baghouse(11,111
CAM square feet of filter area)
ESCPLI-280A Blend bin No. IA
ESCPLI-280B Product/blend bin No. 1B
ESCPLI-280C Product bin No. IC
ESCPL2-280A Blend bin No. 2A
ESCPL2-280B Product/blend bin No.2B
ESCPL2-280C Product bin No.2C CDB 15 Finished granule baghouse
(6,111 square feet of filter area)
ESCPLI-600 R screen No. I
ESCPL2-600 R screen No. 2
ESCPL3-600 R screen No.3
ESCP900 Waste bin
ESCPA9 Line 3 product elevator No. 9,product and blend
bins

Permit No.09006T05
Page 8
Emission Source Control
ID No. Emission Source Description Device ID Control Device Description
No.
ESCPAI0 R screen for line 3 (ROT4)
ESCPCC Line 1 rerun conveyor(consolidation conveyor to
rerun elevator No. 1)
Coloring Plant(continued)
ESCPPH3 One natural gas- Line 3 dryer baghouse(7,111
NSPS UUU fired dryer,line 3 CDB 18 square feet of filter area)
ESCPM3 Mixer,line 3 CDB 19 Line 3 mixer baghouse(2,889
CAM square feet of filter area)
ESCPA6 Kiln feed elevator No. 3 (KFE3)
CDB20 Line 3 kiln baghouse(11,111
ESCPK3 One natural gas-fired kiln,line 3 square feet of filter area)
CAM
ESCPCI Cooler,line 1 N/A N/A
ESCPC2 Cooler,line 2 N/A N/A
ESCPC3 Cooler,line 3 N/A N/A
FCP44A Truck loading with dust suppression N/A N/A
FCP44B Truck loading with dust suppression N/A N/A
FCP363940 Finished product storage bins N/A N/A
FCPA 11 Product conveyor No. I and No. 2 loadouts to N/A N/A
railcars
SECTION 2 - SPECIFIC LIMITATIONS AND CONDITIONS
2.1 - Emission Source(s) and Control Devices(s) Specific Limitations and Conditions
The emission source(s) and associated air pollution control device(s) and appurtenances listed below are subject to the
following specific terms, conditions, and limitations, including the testing, monitoring, recordkeeping, and reporting
requirements as specified herein:
A. Crushing and Screening Operations, including:
• Dryer and G crusher conveyor No.9(G crusher to screens No.2 and No.3 feed bin)(ID No.ES 16-A);
• L crusher product conveyor No. 17,two pickups, (M feed transfer bin and L crusher No. 1 to M screen feed bin)
(ID No. ES32.1);
• Plant feed conveyor No. 1 (feed pile to surge bin)(ID No. ES 123);
• Surge bin(ID No.ES412);
• Feed conveyor No. 2(surge bin to C crusher)(ID No.ES607.1);
• C crusher(ID No. ES607.2);
• G crusher feed bin No. 1 (ID No. ES2327A);
• G crusher feed conveyor No. 8A(G crusher feed bin No. 1 to G crusher No. 1) (ID No. ES2426.1);
• G crusher No. 1 (ID No.ES2426.2);
• M feed transfer bin(ID No. ES3031);
• L crusher bin No. 1 (ID No. ES3941);
• L crusher feed conveyor No. 16A(L crusher feed bin to L crusher) (ID No.ES4347.1);

Permit No. 09006T05
Page 9
• L crusher(ID No.ES4347.2);and
• Conveyor No. 23A(baghouse hopper screw conveyor to dust conveyor No. 2313)(ID No. ESC23A.1)
With associated crusher baghouse No. 1 (6,500 square feet of filter area; ID No.CDB1)
• L crusher product conveyor No. 17(L crushers to conveyor No. 18A)(ID No.ES32A);
• Conveyor No. 18A(L crusher product conveyor No. 17 to live M screens feed bin)(ID No. ES3213);
• Live M screens feed bin,two pickups(ID No. ES340-A);
• D screen bin No.2 (ID No. ES 1721A);
• D screen No.2 feeder(ID No.ES 1721 B);
• D screen No.2(ID No.ES 1721 C);
• G crusher bin feed conveyor No. 5 (D screen No. 2 to G crusher bins)(ID No. ES 1721 D);
• L circuit new feed conveyor No. 13 (D screen No. 2 to M transfer bin)(ID No. ES 1721 E);
• M screen No. 1 (ID No. ES3537A);
• M screen No.2(ID No. ES3537B);
• M screen No. 3 (ID No. ES3537C);
• L feed bin conveyor No. 14,three pickups(M screens to L crusher bins) (ID No. ES3537D);
• Grade collecting conveyor No. 19,three pickups(M screens Nos. 1,2,and 3 to M screens Nos.4,5,and 6)(ID
No.ES3537E);
• Waste conveyor No. 21,three pickup points(M screens to waste bin(ID No. ES3537F);
• D screen bin No. 1 (ID No. ES8913A);
• D screen No. 1 feeder(ID No. ES891313);
• D screen No. 1 (ID No.ES8913C);
• Undersize conveyor No.3 (D screen No. 1 to dryer feed conveyor No.7)(ID No. ES8913D);
• C bin feed conveyor No.4 (D screen No. 1 to C crusher bin)(ID No. ES8913E);
• Dryer feed conveyor No. 7 (undersize conveyor No. 3 to dryer) (ID No. ES8913F); and
• Product conveyor No.3 (C crusher to D screen bin No. 1)(ID No.ESC3)
With associated screen baghouse No. 1 (11,750 square feet of filter area; ID No.CDB2)
• Conveyor No. 23A(dryer baghouse hopper screw conveyors to dust conveyor No. 2313) (ID No. ESC23A.2)
With associated dryer baghouse(12,300 square feet of filter area; ID No.CDB3)
• Dryer and G crusher product conveyor No.9(G crusher to screens No.2 feed bin)(ID No.ES 16-13);
• Conveyor No. 18A(conveyor No. 17 to conveyor No. 1813)(ID No. ES33A);
• Conveyor No. 18B (conveyor No. 18A to live M feed bin) (ID No. ES3313);
• Live M feed bin,two pickups(ID No.ES340-13);
• D screen bin No. 3 (ID No.ES 1822A);
• D screen feeder No. 3 (ID No. ES 182213);
• D screen No. 3 (ID No. ES 1822C);
• Feed conveyor No. 5,two pickups(D screens Nos. 2 and 3 to G crusher bin)(ID No.ES 1822D);
• M screen No.4(ID No.ES3537G);
• M screen No. 5 (ID No. ES3537H);
• M screen No. 6(ID No. ES3537I);
• L crusher feed bin conveyor No. 14,three pickups (M screens to L crusher)(ID No. ES3537J);
• Grade collecting conveyor No. 19,three pickup points(M screens to grade silos)(ID No.ES3537K);
• Waste conveyor No.21,three pickups(M screen to waste bin)(ID No.ES3527L);and
• Dust conveyor No. 23C(baghouse hopper to dust elevator)(ID No. ESC23C)
With associated screen baghouse No.2 (9,000 square feet of filter area;ID No. CDB4)

Permit No. 09006T05
Page 10
A. Crushing and Screening Operations, including (continued):
• Dryer and G crusher product conveyor No.9(G crusher to screens No.2feed bin)(ID No.ES 16-C);
• L crusher product conveyor No. 17(L crushers and M feed transfer bin to M screen feed bin)(ID No.ES32.2);
• Conveyor No. 14 (M screens to conveyor No. 14A) (ID No. ES38);
• Conveyor No. 14A(conveyor No. 14 to L crusher feed bins) (ID No. ES39);
• G crusher bin No.2(ID No. ES2327);
• Feed conveyor No. 6(D screens to G crusher bins)(ID No.ES2327B);
• G crusher feed conveyor No. 88(G crusher bin to G crusher)(ID No. ES2729.1);
• G crusher No. 2 (ID No. ES2729.2);
• Feed conveyor No. 14A to L crusher bin No. 2 (ID No.ES4042);
• L crusher bin No.2(ID No.ES4043);
• Feed conveyor 16B to L crusher No.2(ID No.ES4044)
• L crusher feed conveyor No. 16B (ID No. ES4448.1); and
• L crusher No. 2 (ID No. ES4448.2)
With associated crusher baghouse No.2(5,250 square feet of filter area; ID No.CDBS)
• Dust conveyor No. 23C(10 tons per hour capacity;baghouse hopper loadout to dust elevator) (ID No. ES23C);
• Grade collection conveyor No. 19 (M screens to grade bucket elevator)(ID No. ES49A);
• Grade bucket elevator,two pickups(grade collecting conveyor 19 to grade transfer conveyor 20)(ID No. ES49B);
• Grade transfer conveyor No.20,two pickups(grade bucket elevator to grade silos)(ID No.ES50);
• Grade silo conveyor No. 26,three pickups(grade silos to bin discharge bucket elevator)(ID No. ES57);
• Grade transfer conveyor No.27 (bin discharge elevator to coloring plant)(ID No. ES58);
• Bin discharge bucket elevator No.4,two pickups(ID No. ES59);
• Grade silo No. 1 (ID No.ES5155A);
• Grade silo No.2 (ID No.ES5155B);and
• Grade silo No. 3 (ID No. ES5155C)
With associated grade silo baghouse(5,250 square feet of filter area; ID No.CDB6)
• Dust conveyor No.23C(hoppers for screens,grade silo,and waste baghouses to dust elevator)(ID No.ES63A);
• Dust elevator,two pickups(ID No. ES63B);
• Waste conveyor No. 21 (ID No. ES68A);
• Waste elevator,two pickups(ID No. ES68B);
• Dust bin(ID No.ES6466);
• Waste bin(ID No.ES6970); and
• Dust bin screw conveyor(waste handling baghouse hopper to pugmill)(ID No. ES6466SC)
With associated waste handling baghouse(2,750 square feet of filter area; ID No.CDB7)
• D Screen No.4 assembly(includes the vibrator)(ID No. ESA l);
• Load-in to conveyor No. 18C (ID No. ESA5);
• Line 3 live M feed bin(ID No. ESA6);
• Line 3 M screen assemblies(ID No.ESA7);and
• Screen baghouse No. 3 ash loadout(ID No.ESA11)
With associated screen baghouse No.3 (9,000 square feet of filter area; ID No.CDB16)

Permit No.09006T05
Page 11
A. Crushing and Screening Operations, including (continued):
• G bin feed conveyor No. 6 loadout to bin feed conveyor No. 6A(ID No. ESA2);
• G feed bin No. 3 (ID No.ESA3);
• G crusher No.3 (ID No.ESA4);
• Feed bin No. 3 (ID No. ESA8);
• L crusher No. 3 (ID No. ESA9);and
• Crusher baghouse No.3 ash loadout(ID No. ESA12)
With associated crusher baghouse No.3 (6,500 square feet of filter area; ID No. CDB17)
Other Sources in crushing and screening plant
• Enclosed dust conveyor No. 23B (dust conveyor No. 23A to transfer conveyor No. 23C)(ID No. F61);
• Enclosed waste stacker conveyor No.25 with wet suppression(pugmill to outside storage)(ID No.F72);
• Enclosed pugmill with wet suppression(dust and waste processing)(ID No.F6771);and
• Waste pile(ID No. FWP)
The following table provides a summary of limits and standards for the emission source(s)described above:
Regulated Pollutant Limits/Standards Applicable Regulation
Particulate matter Work practice standards 15A NCAC 2D .0510
Particulate matter from stacks associated with screen 0.05 grams per dry standard
feeders,conveyors,screening operations,storage bins,
elevators,and building vents cubic meter
Visible emissions from stacks associated with
conveyors,screening operations,screen feeders, 7 percent opacity 15A NCAC 213 .0524
storage bins,and elevators [40 CFR Part 60, Subpart 000]
Visible emissions due to fugitive emissions from each
conveyor,screening operation, screen feeder,storage 10 percent opacity
bin, elevator,and building vent; or
Visible emissions from the vents of the crushing and 0 percent opacity
screening building
Particulate matter associated with fugitive non- Work practice standards 15A NCAC 213.0540
process dust emissions
1. 15A NCAC 2D .0510: PARTICULATES FROM SAND,GRAVEL,OR CRUSHED STONE OPERATIONS
a. The owner or operator of a sand, gravel, or crushed stone operation shall not cause, allow, or permit any material
to be produced,handled,transported or stockpiled without taking measures to reduce to a minimum any particulate
matter from becoming airborne to prevent exceeding the ambient air quality standards beyond the property line for
particulate matter,both PM 10 and total suspended particulates.
b. Fugitive non-process dust emissions from sand, gravel, or crushed stone operations shall be controlled in
accordance with 15A NCAC 2D.0540 as described in Section 2.1 A.3,below.
c. The owner or operator of any sand, gravel, or crushed stone operation shall control process-generated emissions
from conveyors, screens, and transfer points, such that the applicable opacity standards in 15A NCAC 15A NCAC
2D .0524,as described in Section 2.1 A.2.a,below,are not exceeded.
Monitoring/Recordkeeping/Reporting
d. The monitoring, recordkeeping, and reporting requirements for 15A NCAC 2D .0510 shall be satisfied by
compliance with the monitoring, recordkeeping, and reporting requirements of the New Source Performance
Standards,40 CFR Part 60, Subpart 000 found in Section 2.1 A.2,below.

Permit No. 09006T05
Page 12
2. 15A NCAC 2D.0524: NEW SOURCE PERFORMANCE STANDARDS
40 CFR Part 60,Subpart 000: Standards of Performance for Nonmetallic Mineral Processing Plants
For the conveyors, screening operations, screen feeders, storage bins, elevators, and building vents, the Permittee shall
comply with all applicable provisions, including the notification, testing, reporting, recordkeeping, and monitoring
requirements contained in Environmental Management Commission Standard 15A NCAC 2D .0524 "New Source
Performance Standards" as promulgated in 40 CFR 60, Subpart 000 "Standards of Performance for Nonmetallic
Mineral Processing Plants,"including Subpart A "General Provisions." [15A NCAC 2D .0524]
Emissions Limitations- [15A NCAC 2D .0524 and 40 CFR§60.672]
a. The building enclosing the affected facility and building vents and/or stacks must comply with the following
emission limits:
i. No visible fugitive emissions shall be discharged into the atmosphere from any building enclosing any
transfer point on a conveyor belt or any other affected facility (screening operations, screen feeders, storage
bins,elevators,etc.)except emissions through a vent as defined in 40 CFR§60.671.
ii. Particulate emissions from any vent of any building enclosing any transfer points on a conveyor belt or any
other affected facility (screening operations, screen feeders, storage bins, elevators, etc.) that commenced
construction, modification, or reconstruction after August 31, 1983 but before April 22, 2008, shall not be
more than 0.05 grams per dry standard cubic meter(0.02 grains per dry standard cubic foot);
iii. Particulate emissions from any vent of any building enclosing any transfer points on a conveyor belt or any
other affected facility (screening operations, screen feeders, storage bins, elevators, etc.) that commenced
construction, modification, or reconstruction on or after April 22, 2008, shall not be more than 0.032 grams
per dry standard cubic meter(0.014 grains per dry standard cubic foot)unless the affected facility meets
the exemption provisions of§60.672;
iv. Like-kind Replacement dust conveyor (ID No. ESC23C) is exempt from the provisions of §60.672 per
§60.670(d)(1); thus, the replacement facility shall comply with the same emission limitations as specified in
Condition 2.1-A.2.a.ii. above;
v. Visible emissions from any vent of any building enclosing any transfer points on a conveyor belt or any other
affected facility(i.e. screening operations,screen feeders,storage bins,elevators,etc.)shall not be more than 7
percent opacity.
Testing[15A NCAC 2Q .0508(f)]
b. If emissions testing is required, the testing shall be performed in accordance with 15A NCAC 2Q .0508(f),40 CFR
§60.675,and General Condition JJ found in Section 3. If the results of this test are above the limit given in Section 2.1
A.2.a,above,the Permittee shall be deemed in noncompliance with 15A NCAC 2D.0524.
The Permittee conducted the initial performance testing for the sources listed in Section 2.1 A, above, as
applicable, utilizing US EPA Method 5 and Method 9, on September 26, 2007 (for silo No. 3; ID No. ES5155C)
and August 5, 2002 through August 8, 2002 (for all other subject sources). Those tests indicated compliance with
the applicable requirements.
i. Like-kind Replacement dust conveyor (ID No. ESC23C) is exempt from the provisions of §60.675 per
§60.670(d)(1).
Monitoring [15A NCAC 2Q .0508(f)]
c. Monitoring to assure compliance with the applicable emissions standards of Section 2.1 A.2.a, above, shall be
performed by the Permittee per the following:
i. Observation of a building enclosure containing affected facilities:
(A) Observe each building each month for any visible emissions. Should any visible emissions be observed,
each affected facility enclosed in the building shall be deemed to be in noncompliance with 15A NCAC
2D .0524 UNLESS a compliance demonstration for each affected facility enclosed in the building is
performed in accordance with the following;

Permit No.09006T05
Page 13
(B) After corrective action is taken, a Method 9 opacity for stacks OR Method 22 if observing an affected
facility's building enclosure determination meeting the requirements of 40 CFR §60.675 and 15A NCAC
2D .2601 is performed and visible emissions are demonstrated to comply with the applicable limit(s)
given in 40 CFR §§60.672(a)and(e). If compliance for the affected facility cannot be demonstrated,then
the affected facility shall be deemed to be in noncompliance with 15A NCAC 2D .0524
ii. The Permittee shall be deemed in noncompliance with 15A NCAC 2D .0524 if this monitoring is not
conducted.
Recordkeeping [15A NCAC 2Q .0508(f)]
d. Results of monitoring shall be maintained in a log (written or electronic form) and made available to authorized
personnel upon request.The following shall be recorded in the log:
i. The results of the monthly building fugitive emissions observations or the monthly visible emissions
observations for each affected facility;
ii. Whether the observed emissions source was the building or each affected facility within the building,date and
time of the each observation;
iii. If any emissions were observed from the building, the time and any resulting action(s) taken to reduce
emissions exceeding an applicable limit;
iv. The date, time, and type of all corrective actions performed to prevent such an exceedance from re-occurring
and a copy of any Method 9 or Method 22 opacity observation performed for the purpose of demonstrating
compliance with the applicable emissions limit(s).
The Permittee shall be deemed in noncompliance with 15A NCAC 2D.0524 if these records are not maintained.
Reporting[15A NCAC 2Q.0508(f)]
e. The Permittee shall submit a written summary report,of the monitoring and recordkeeping activities as follows:
i. A report of any changes in existing facilities as specified in 40 CFR §60.676 "Reporting and recordkeeping,"
including equipment being replaced and the replacement equipment of affected facilities. This report shall be
submitted to the Administrator as requested.
ii. A summary report of monitoring and recordkeeping activities postmarked or delivered by January 30 of each
calendar year for the preceding six-month period between July and December and July 30 of each calendar
year for the preceding six-month period between January and June. All instances of deviations from the
requirements of this permit must be clearly identified.
iii. A report of any non-compliant emissions observed to occur from a building enclosing an affected facility OR
the applicable opacity limit(s) of 40 CFR §60.672(a), (b) and (c) as established using Method 9 or 22
compliance demonstrations conducted on an affected facility or building, along with the determined cause of
exceedance and the resulting corrective action taken, within 5 business days of non-compliant observation.
f. Like-kind Replacement- As provided in 40 CFR 60.670(d), when an existing facility(ID No. ESC23C controlled
by CD No. CDB4; Application No. 1900104.13A) is replaced by a piece of equipment of equal or smaller size, as
defined in 40 CFR 60.671, having the same function as the existing facility, the new facility is exempt from the
provisions of 40 CFR 60.672, 60.674, and 60.675 except as provided for in 60.670(d)(3). The Permittee shall
comply with the reporting requirements of 40 CFR 60.676(a).
3. 15A NCAC 2D.0540:PARTICULATES FROM FUGITIVE NON PROCESS DUST EMISSION SOURCES
a. For the purpose of Section 2.1 A.3 the following definitions shall apply:
i. "Fugitive non-process dust emission" means particulate matter that is not collected by a capture system and is
generated from areas such as pit areas,process areas,haul roads,stockpiles,and plant roads; and
ii. "Substantive complaints" means complaints that are verified with physical evidence acceptable to the Division.
b. The owner or operator of a facility required to comply with rule 15A NCAC 2D .0510 "Particulates from Sand,
Gravel, or Crushed Stone Operations" shall not cause or allow fugitive non-process dust emissions to cause or
contribute to substantive complaints.

Permit No. 09006T05
Page 14
c. If fugitive non-process dust emissions from a facility required to comply with rule 15A NCAC 21) .0540 cause or
contribute to substantive complaints,the owner or operator of the facility shall:
i. Within 30 days upon receipt of written notification from the Director of a second substantive complaint in a
consecutive 12-month period,submit to the Director a written description of what has been done and what will
be done to reduce fugitive non-process dust emissions from that part of the facility that caused the second
substantive complaint;
ii. Within 90 days of receipt of written notification from the Director of a second substantive complaint in a
consecutive 12-month period,submit to the Director a control plan; and
iii. Within 30 days after the Director approves the plan,be in compliance with the plan.
d. If after a plan has been implemented, the Director finds that the plan inadequately controls fugitive non-process
dust emissions, he shall require the owner or operator of the facility to correct the deficiencies in the plan. Within
90 days after receiving written notification from the Director identifying the deficiency, the owner or operator of
the facility shall submit a revision to his plan to correct the deficiencies.
Monitorin2/Recordkeepin2/Reporting
e. No monitoring, recordkeeping, or reporting for particulates from fugitive non-process dust emissions from these
sources pursuant to 15A NCAC 2D .0540 is required at this time.
B. One natural gas-fired dryer (ID No. ES1415) with one associated simple cyclone (eight feet in
diameter; 1D No. CDC1) in series with one baghouse (12,300 square feet of filter area; ID No.
CDB3)
The following table provides a summary of limits and standards for the emission source(s)described above:
Regulated Pollutant Limits/Standards Applicable Regulation
Sulfur dioxide 2.3 pounds per million Btu heat input 15A NCAC 2D.0516
Particulate matter 0.057 grams per dry standard cubic meter 15A NCAC 2D .0524
[40 CFR Part 60, Subpart UUU]
Visible emissions 10 percent opacity 15A NCAC 2D .0524
[40 CFR Part 60, Subpart UUU]
Odorous emissions See Section 2.2-A.2 15A NCAC 2D .1806
Hazardous Air Pollutants See Section 2.2-A.3 15A NCAC 2Q.0317 to avoid
15A NCAC 2D .1111
1. 15A NCAC 2D.0516: SULFUR DIOXIDE EMISSIONS FROM COMBUSTION SOURCES
a. Emissions of sulfur dioxide from this dryer (ID No. ES 1415) shall not exceed 2.3 pounds per million Btu heat
input. Sulfur dioxide formed by the combustion of sulfur in fuels, wastes, ores, and other substances shall be
included when determining compliance with this standard. [15A NCAC 21) .0516]
Testing [15A NCAC 2Q .0508(f)]
b. If emissions testing is required, the testing shall be performed in accordance with 15A NCAC 2Q .0508(f) and
General Condition JJ found in Section 3 of this permit.if the results of this test are above the limit given in Section
2.1 B.La,above,the Permittee shall be deemed in noncompliance with 15A NCAC 21) .0516.
Monitoring/Recordkeeping/Reporting[15A NCAC 2Q .0508(f)]
c. No monitoring,recordkeeping, or reporting is required for sulfur dioxide emissions from the firing of natural gas in
this dryer(ID No. ES 1415).
2. 15A NCAC 2D.0524:NEW SOURCE PERFORMANCE STANDARDS
40 CFR Part 60,Subpart UUU: NSPS For Calciners and Dryers in Mineral Industries
a. For this dryer (ID No. ES1415), the Permittee shall comply with all applicable provisions, including the
notification, testing, reporting, recordkeeping, and monitoring requirements contained in Environmental

Permit No. 09006T05
Page 15
Management Commission Standard 15A NCAC 2D .0524 "New Source Performance Standards" as promulgated
in 40 CFR Part 60, Subpart UUU "Standards of Performance for Calciners and Dryers in Mineral Industries,"
including Subpart A"General Provisions." [15A NCAC 2D .0524]
Emission Limitations[15A NCAC 2D.0524 and 40 CFR§60.732]
b. Particulate matter emissions from this dryer (ID No. ES1415) shall not exceed 0.057 gram per dry standard
cubic meter(g/dscm).
c. Visible emissions from this dryer(ID No. ES1415)shall not exceed 10 percent opacity(6-minute average).
Testing[15A NCAC 2Q.0508(f)]
d. If emissions testing is required,the testing shall be performed in accordance with 15A NCAC 2Q.0508(f),40 CFR
§60.736, and General Condition JJ found in Section 3 of this permit. If the results of this test are above the limit
given in Section 2.1 B.2.b or c, above, as applicable, the Permittee shall be deemed in noncompliance with 15A
NCAC 2D .0524.
The Permittee conducted the initial testing for dryer ES 1415 on August 6,2002. Those tests indicated compliance
with the applicable requirements.
Monitoring/Recordkeeping[15A NCAC 2Q .0508(f)and 40 CFR§§60.734 and 735]
e. i. The owner and operator of an affected facility subject to the provisions of this subpart who uses a dry control
device to comply with the mass emission standard shall install, calibrate, maintain, and operate a continuous
monitoring system to measure and record the opacity of emissions that are discharged into the atmosphere
from the control device.Records of monitoring shall be kept for a minimum of 5 years.
ii. Particulate matter emissions from dryer ES 1415 shall be controlled by bagfilter CDB3. To assure compliance,
the Permittee shall perform inspections and maintenance as recommended by the manufacturer. In addition to
the manufacturer's inspection and maintenance recommendations, or if there is no manufacturer's inspection
and maintenance recommendations, as a minimum, the inspection and maintenance requirement shall include
the following:
(A) An annual (for each 12 month period following the initial inspection) visual inspection of the system
ductwork and material collection unit for leaks;and
(B) An annual(for each 12 month period following the initial inspection) internal inspection of the bagfilter's
structural integrity.
(C) An annual (for each 12 month period following the initial inspection) inspection of the cyclone for
structural integrity.
The Permittee shall be deemed in noncompliance with 15A NCAC 2D.0524 if the ductwork and bagfilters are
not inspected and maintained.
iii. The results of inspection and maintenance shall be maintained in a logbook (written or electronic format) on-
site and made available to an authorized representative upon request. The logbook shall record the following:
(A) The date and time of each recorded action;
(B) The results of each inspection;
(C) The results of any maintenance performed on the bagfilters; and
(D) Any variance from manufacturer's recommendations, if any,and corrections made.
The Permittee shall be deemed in noncompliance with 15A NCAC 2D .0524 if these records are not
maintained.
Reporting [15A NCAC 2Q .0508(f)]
f. The Permittee shall submit a summary report of the monitoring requirements postmarked or delivered by January
30 of each calendar year for the preceding six-month period between July and December and July 30 of each
calendar year for the preceding six-month period between January and June. All instances of deviations from the
requirements of this permit must be clearly identified.

Permit No. 09006TO5
Page 16
C. Coloring Plant sources, including:
• Headlap bin(ID No.ESCP1012A);
• Transfer conveyor No. 27(grade silos to headlap and raw granule bins,ID No.ESCP1012B);
• Raw granule bin No. 1 (ID No. ESCP1012C);
• Raw granule bin No. 2(ID No.ESCP1012D);
• Line 1 dryer feed conveyor, two pickups(line 1 raw granule and rerun bins to dryer)(ID No.ESCPPFCI);and
• Line 2 dryer feed conveyor,two pickups(line 2 raw granule and rerun bins to dryer)(ID No.ESCPPFC2)
With associated raw granule baghouse(5,750 square feet of filter area; ID No.CDB8)
• Blend bin No. lA(ID No.ESCPLI-280A);
• Product/blend bin No. 1B(ID No.ESCPLI-280B);
• Product bin No. I(ID No.ESCPLI-280C);
• Blend bin No.2A(ID No.ESCPL2-280A);
• Productiblend bin No.2B(ID No.ESCPL2-280B);
• Product bin No.2C(ID No.ESCPL2-280C);
• R screen No. 1 (ID No. ESCPLI-600);
• R screen No.2(ID No.ESCPL2-600);
• R screen No.3 (ID No.ESCPL3-600);
• Waste bin(ID No.ESCP900);
• Line 3 product elevator No.9,product and blend bins(ID No.ESCPA9);
• R screen for line 3 (ROT4)(ID No.ESCPAIO); and
• Line 1 rerun conveyor(consolidation conveyor to rerun elevator No. 1)(ID No.ESCPCC)
With associated finished granule baghouse(6,111 square feet of filter area;ID No.CDB15)
• Kiln feed elevator No. 3 (KFE3)(ID No. ESCPA6)
With associated line 3 kiln baghouse(11,111 square feet of filter area; ID No.CDB20)
Other sources in the Coloring Plant
• Truck loading with dust suppression(ID No.FCP44A);
• Truck loading with dust suppression(ID No. FCP44B);
• Finished product storage bins(ID No.FCP363940);and
• Product conveyor No. 1 and No.2 loadouts to railcars(ID No.FCPAI 1)
The following table provides a summary of limits and standards for the emission source(s)described above:
Regulated Pollutant Limits/Standards Applicable Regulation
Particulate matter Work practice standards 15A NCAC 213 .0510
Visible emissions from conveyors,screening
operations,screen feeders,storage bins 20 percent opacity 15A NCAC 2D .0521
Particulate matter associated with fugitive Work practice standards 15A NCAC 213.0540
non-process dust emissions
Volatile Organic Compounds See Section 2.2-A.1 15A NCAC 2D.0958

Permit No. 09006T05
Page 17
Regulated Pollutant Limits/Standards Applicable Regulation
Toxic air pollutant emissions shall
not exceed rates which cause
Toxic air pollutants established ambient levels to be 15A NCAC 2D .1100
exceeded; State-enforceable only
(See Section 2.2-A.4.—Multiple
Emission Sources)
Odorous emissions See Section 2.2-A.2 15A NCAC 2D .1806
Hazardous Air Pollutants See Section 2.2-A.3 15A NCAC 2Q .0317 to avoid
15A NCAC 2D.I I I I
Toxic Air Pollutants See Section 2.2-A.5 15A NCAC 2Q.0711
1. 15A NCAC 2D.0510: PARTICULATES FROM SAND,GRAVEL,OR CRUSHED STONE OPERATONS
a. The owner or operator of a sand, gravel, or crushed stone operation shall not cause, allow, or permit any material
to be produced,handled,transported or stockpiled without taking measures to reduce to a minimum any particulate
matter from becoming airborne to prevent exceeding the ambient air quality standards beyond the property line for
particulate matter,both PM 10 and total suspended particulates.
b. Fugitive non-process dust emissions from sand, gravel, or crushed stone operations shall be controlled in
accordance with 15A NCAC 2D.0540 as described in Section 2.1 C.3,below.
c. The owner or operator of any sand, gravel, or crushed stone operation shall control process-generated emissions
from conveyors,screens, and transfer points,such that the applicable opacity standards in 15A NCAC 2D .0521,as
described in Section 2.1 C.2.a,below,are not exceeded.
Monitoring/Recordkeeping/Reporting
d. The monitoring, recordkeeping, and reporting requirements for 15A NCAC 2D .0510 shall be satisfied by
compliance with the monitoring, recordkeeping, and reporting requirements of 15A NCAC 2D .0521, as described
in Sections 2.1 C.2.c,d,and e,below.
2. 15A NCAC 2D.0521: CONTROL OF VISIBLE EMISSIONS
a. Visible emissions from the sources from the Coloring Plant building shall not be more than 20 percent opacity
when averaged over a six-minute period. However, six-minute averaging periods may exceed 20 percent not more
than once in any hour and not more than four times in any 24-hour period. In no event shall the six-minute average
exceed 87 percent opacity. [15A NCAC 2D.0521(d)]
Testing [15A NCAC 2Q .0508(f)]
b. If emissions testing is required, the testing shall be performed in accordance with 15A NCAC 2Q .0508(f) and
General Condition JJ found in Section 3 of this permit. If the results of this test are above the limit given in Section
2.1 C.2.a,above,the Permittee shall be deemed in noncompliance with 15A NCAC 2D.0521.
Monitoring[15A NCAC 2Q.0508(f)]
c. To assure compliance, once a month the Permittee shall observe the emission points of these sources for any
visible emissions above normal.The monthly observation must be made for each month of the calendar year period
to ensure compliance with this requirement. If visible emissions from a source are observed to be above normal,
the Permittee shall either:
i. Take appropriate action to correct the above-normal emissions as soon as practicable and within the
monitoring period and record the action taken as provided in the recordkeep.ng requirements below,or
ii. Demonstrate that the percent opacity from the emission points of the emission source in accordance with 15A
NCAC 2D .2610 (Method 9)for 12 minutes is below the limit given in Section 2.1 C.2.a,above.
If the above-normal emissions are not corrected per(i)above or if the demonstration in(ii)above cannot be made,
the Permittee shall be deemed to be in noncompliance with 15A NCAC 2D.0521.

Permit No. 09006T05
Page 18
Recordkeeping[15A NCAC 2Q.0508(f)]
d. The results of the monitoring shall be maintained in a logbook (written or electronic format) on-site and made
available to an authorized representative upon request. The logbook shall record the following:
i. The date and time of each recorded action;
ii. The results of each observation and/or test noting those sources with emissions that were observed to be in
noncompliance along with any corrective actions taken to reduce visible emissions;and
iii. The results of any corrective actions performed.
The Permittee shall be deemed in noncompliance with 15A NCAC 2D .0521 if these records are not maintained.
Reporting[15A NCAC 2Q.0508(f)]
e. The Permittee shall submit a summary report of the observations postmarked or delivered by January 30 of each
calendar year for the preceding six-month period between July and December and July 30 of each calendar year for
the preceding six-month period between January and June.All instances of deviations from the requirements of this
permit must be clearly identified.
3. 15A NCAC 2D .0540: PARTICULATES FROM SAND,GRAVEL,OR CRUSHED STONE OPERATONS
a. For the purpose of Section 2.1 C.3 the following definitions shall apply:
i. "Fugitive non-process dust emission" means particulate matter that is not collected by a capture system and is
generated from areas such as pit areas,process areas,haul roads, stockpiles,and plant roads;and
ii. "Substantive complaints"means complaints that are verified with physical evidence acceptable to the Division.
b. The owner or operator of a facility required to comply with rule 15A NCAC 2D .0510 "Particulates from Sand,
Gravel, or Crushed Stone Operations" shall not cause or allow fugitive non-process dust emissions to cause or
contribute to substantive complaints.
c. If fugitive non-process dust emissions from a facility required to comply with rule 15A NCAC 2D .0540 cause or
contribute to substantive complaints,the owner or operator of the facility shall:
i. Within 30 days upon receipt of written notification from the Director of a second substantive complaint in a
consecutive 12-month period, submit to the Director a written description of what has been done and what will
be done to reduce fugitive non-process dust emissions from that part of the facility that caused the second
substantive complaint;
ii. Within 90 days of receipt of written notification from the Director of a second substantive complaint in a
consecutive 12-month period,submit to the Director a control plan;and
iii. Within 30 days after the Director approves the plan,be in compliance with the plan.
d. If after a plan has been implemented, the Director finds that the plan inadequately controls fugitive non-process
dust emissions,he shall require the owner or operator of the facility to correct the deficiencies in the plan. Within
90 days after receiving written notification from the Director identifying the deficiency, the owner or operator of
the facility shall submit a revision to his plan to correct the deficiencies.
Monitoring/Recordkeeping/Repor tins
e. No monitoring, recordkeeping, or reporting for particulates from fugitive non-process dust emissions from these
sources pursuant to 15A NCAC 2D .0540 is required at this time.

Permit No. 09006T05
Page 19
D. Three natural gas-fired dryers (ID Nos. ESCPPHI, ESCPPH2, and ESCPPH3) with three
associated baghouses (7,111 square feet of filter area, each; ID Nos. CDB9, CDB10, and
CDB18, respectively)
The following table provides a summary of limits and standards for the emission source(s)described above:
_T
Regulated Pollutant Limits/Standards Applicable Regulation
Sulfur dioxide 2.3 pounds per million Btu heat input 15A NCAC 2D.0516
Particulate emissions 0.057 grams per dry standard cubic meter 15A NCAC 2D .0524
(40 CFR Part 60,Subpart UUU]
Visible emissions 10 percent opacity 15A NCAC 2D.0524
[40 CFR Part 60, Subpart UUU]
Odorous emissions See Section 2.2-A.2 15A NCAC 2D .1806
Hazardous Air Pollutants See Section 2.2-A.3 15A NCAC 2Q .0317 to avoid15A NCAC 2D .1 I I I
1. 15A NCAC 2D.0516: SULFUR DIOXIDE EMISSIONS FROM COMBUSTION SOURCES
a. Emissions of sulfur dioxide from these dryers(ID Nos. ESCPPHI, ESCPPH2,and ESCPPH3) shall not exceed 2.3
pounds per million Btu heat input. Sulfur dioxide formed by the combustion of sulfur in fuels,wastes, ores,and
other substances shall be included when determining compliance with this standard. [15A NCAC 2D.0516]
Testing [15A NCAC 2Q .0508(f)]
b. If emissions testing is required, the testing shall be performed in accordance with 15A NCAC 2Q .0508(f) and
General Condition JJ found in Section 3 of this permit. If the results of this test are above the limit given in Section
2.1 D.La,above,the Permittee shall be deemed in noncompliance with 15A NCAC 2D.0516.
Monitorin$/Recordkeepin2/Reportin2[15A NCAC 2Q.0508(f)]
c. No monitoring,recordkeeping,or reporting is required for sulfur dioxide emissions from the firing of natural gas in
these dryers(ID Nos. ESCPPHI,ESCPPH2,and ESCPPH3)
2. 15A NCAC 2D.0524:NEW SOURCE PERFORMANCE STANDARDS
40 CFR Part 60,Subpart UUU:NSPS for Calciners and Dryers in Mineral Industries
a. For these dryers (ID Nos. ESCPPHI, ESCPPH2, and ESCPPH3), the Permittee shall comply with all applicable
provisions, including the notification, testing, reporting, recordkeeping, and monitoring requirements contained in
Environmental Management Commission Standard 15A NCAC 2D .0524 "New Source Performance Standards
(NSPS)" as promulgated in 40 CFR Part 60 Subpart UUU "Standards of Performance for Calciners and Dryers in
Mineral Industries,"including Subpart A"General Provisions." [15A NCAC 2D.0524]
Emission Limitations [15A NCAC 2D.0524 and 40 CFR§60.732]
b. Particulate matter emissions from each dryer (ID Nos. ESCPPHI, ESCPPH2, and ESCPPH3) shall not exceed
0.057 gram(g)per dry standard cubic meter(dscm).
c. Visible emissions from these three dryers (ID Nos. ESCPPHI, ESCPPH2, and ESCPPH3) shall not exceed 10
percent opacity(6-minute average).
Testing[15A NCAC 2Q .0508(f)]
d. If emissions testing is required,the testing shall be performed in accordance with 15A NCAC 2Q.0508(f),40 CFR
§60.736, and General Condition JJ found in Section 3 of this permit. If the results of this test are above the limit
given in Section 2.1 D.2.b or c, above, as applicable, the Permittee shall be deemed in noncompliance with 15A
NCAC 2D.0524.
i. The Permittee conducted the initial compliance testing for dryers ESCPPH 1 and ESCPPH2 on August 8, 2002
and August 7, 2002, respectively. Those tests indicated compliance with the applicable requirements. No
additional testing is required for these dryers.

Permit No.09006T05
Page 20
ii. Under the provisions of NCGS 143-215.108, the Permittee shall demonstrate compliance with the emission
limit in Section 2.1 D.2.b,above,for dryer ESCPPH3 by testing for particulate emissions by utilizing EPA test
method 5. The sampling time shall be and volume for each test run shall be at least 2 hours and 1.70 dscm.
This testing must be conducted within 60 days of achieving the maximum production rate of dryer ESCPPH3
and no later than 180 days after initial startup of dryer ESCPPH3.
iii. Under the provisions of NCGS 143-215.108, the Permittee shall demonstrate compliance with the emission
limit in Section 2.1 D.2.c, above, for dryer ESCPPH3 by testing for opacity of visible emissions by utilizing
EPA test method 9. This testing must be conducted within 60 days of achieving the maximum production rate
of dryer ESCPPH3 and no later than 180 days after initial startup of dryer ESCPPH3.
Monitoring/Recordkeeping [15A NCAC 2Q.0508(f)and 40 CFR§§60.734 and 735]
e. i. The owner and operator of an affected facility subject to the provisions of this subpart who uses a dry control
device to comply with the mass emission standard shall install, calibrate, maintain, and operate a continuous
monitoring system to measure and record the opacity of emissions that are discharged into the atmosphere
from the control device.Records of monitoring shall be kept for a minimum of 5 years.
ii. Particulate matter emissions from dryers ESCPPHI, ESCPPH2, and ESCPPH3 shall be controlled by
bagfilters CD139, CDB 10, and CDB 18, respectively. To assure compliance, the Permittee shall perform
inspections and maintenance as recommended by the manufacturer. In addition to the manufacturer's
inspection and maintenance recommendations, or if there is no manufacturer's inspection and maintenance
recommendations,as a minimum,the inspection and maintenance requirement shall include the following:
(A) An annual (for each 12 month period following the initial inspection) visual inspection of the system
ductwork and material collection unit for leaks;and
(B) An annual(for each 12 month period following the initial inspection) internal inspection of the bagfilters'
structural integrity.
The Permittee shall be deemed in noncompliance with 15A NCAC 2D .0524 if the ductwork and bagfilters are
not inspected and maintained.
iii. The results of inspection and maintenance shall be maintained in a logbook(written or electronic format) on-
site and made available to an authorized representative upon request.The logbook shall record the following:
(A) The date and time of each recorded action;
(B) The results of each inspection;
(C) The results of any maintenance performed on the bagfilters;and
(D) Any variance from manufacturer's recommendations, if any,and corrections made.
The Permittee shall be deemed in noncompliance with 15A NCAC 2D .0524 if these records are not
maintained.
Reporting[I5A NCAC 2Q.0508(f)]
f. The Permittee shall submit a summary report of the monitoring requirements postmarked or delivered by January
30 of each calendar year for the preceding six-month period between July and December and July 30 of each
calendar year for the preceding six-month period between January and June. All instances of deviations from the
requirements of this permit must be clearly identified.

Permit No.09006T05
Page 21
E. Three natural gas-fired kilns (ID Nos. ESCPKI, ESCPK2, and ESCPK3) with three
associated baghouses (11,111 square feet of filter area, each; ID Nos. CDB13, CDB14, and
CDB20, respectively)
The following table provides a summary of limits and standards for the emission source(s)described above:
Regulated Pollutant Limits/Standards Applicable Regulation
E=4.10 x(P)°G7 for P<30 tons per hour
E=55.0 x(P)0.11—40 for P>30 tons per hour 15A NCAC 2D.0515
Particulate emissions —
Compliance Assurance Monitoring 15A NCAC 2D.0614
See Section 2.2 B
Sulfur dioxide 2.3 pounds per million Btu heat input 15A NCAC 2D .0516
Visible emissions 20 percent opacity 15A NCAC 2D .0521
Odorous emissions See Section 2.2-A.2 15A NCAC 2D .1806
Hazardous Air Pollutants See Section 2.2-A.3 15A NCAC 2Q .0317 to avoid15A NCAC 2D.I I I I
1. 15A NCAC 2D.0515: PARTICULATES FROM MISCELLANEOUS INDUSTRIAL PROCESSES
a. Emissions of particulate matter from these kilns (ID Nos. ESCPKI, ESCPK2, and ESCPK3) shall not exceed an
allowable emission rate as calculated by the following equation: [15A NCAC 2D .0515(a)]
E=4.10 x(P)"' for P<30 tons per hour Where: P=Process weight in tons per hour;and
E=55.0 x(P)""—40 for P>30 tons per hour E=Allowable emission rate in pounds per hour
Liquid and gaseous fuels and combustion air are not considered as part of the process weight.
Testing [15A NCAC 2Q .0508(f)]
b. If emissions testing is required, the testing shall be performed in accordance with 15A NCAC 2Q .0508(f) and
General Condition JJ found in Section 3 of this permit.If the results of this test are above the limit given in Section
2.1 E.La,above,the Permittee shall be deemed.in noncompliance with 15A NCAC 2D.0515.
Monitorina/Recordkeeping[15A NCAC 2Q .0508(f)]
c. Particulate matter emissions from these three kilns (ID Nos. ESCPKI, ESCPK2, and ESCPK3) shall be controlled
by three bagfilters(ID Nos. CDB 13,CDB 14,and CDB20,respectively). To assure compliance,the Permittee shall
perform inspections and maintenance as recommended by the manufacturer. In addition to the manufacturer's
inspection and maintenance recommendations, or if there is no manufacturer's inspection and maintenance
recommendations, as a minimum,the inspection and maintenance requirement shall include the following:
i. An annual (for each 12 month period following the initial inspection) visual inspection of the system
ductwork and material collection unit for leaks;and
ii. An annual (for each 12 month period following the initial inspection) internal inspection of the bagfilter's
structural integrity.
The Permittee shall be deemed in noncompliance with 15A NCAC 2D .0515 if the ductwork and bagfilters are not
inspected and maintained.
d. The results of inspection and maintenance shall be maintained in a logbook (written or electronic format) on-site
and made available to an authorized representative upon request.The logbook shall record the following:
i. The date and time of each recorded action;
ii. The results of each inspection;
iii. The results of any maintenance performed on the bagfilters;and
iv. Any variance from manufacturer's recommendations,if any,and corrections made.
The Permittee shall be deemed in noncompliance with 15A NCAC 2D .0515 if these records are not maintained.

Permit No. 09006T05
Page 22
Reporting [15A NCAC 2Q .0508(f)]
e. The Permittee shall submit the results of any maintenance performed on the bagfilters within 30 days of a written
request by the DAQ.
f. The Permittee shall submit a summary report of monitoring and recordkeeping activities postmarked or delivered
on or before January 30 of each calendar year for the preceding six-month period between July and December and
July 30 of each calendar year for the preceding six-month period between January and June. All instances of
deviations from the requirements of this permit must be clearly identified.
2. 15A NCAC 2D.0516: SULFUR DIOXIDE EMISSIONS FROM COMBUSTION SOURCES
a. Emissions of sulfur dioxide from these kilns (ID Nos. ESCPKI, ESCPK2, and ESCPK3) shall not exceed 2.3
pounds per million Btu heat input. Sulfur dioxide formed by the combustion of sulfur in fuels, wastes, ores, and
other substances shall be included when determining compliance with this standard. [15A NCAC 2D.0516]
Testing[15A NCAC 2Q .0508(f)]
b. If emissions testing is required, the testing shall be performed in accordance with 15A NCAC 2Q .0508(f) and
General Condition JJ found in Section 3 of this permit.If the results of this test are above the limit given in Section
2.1 E.2.a, above,the Permittee shall be deemed in noncompliance with 15A NCAC 2D .0516.
Monitoring/Recordkeeping/Reporting [15A NCAC 2Q .0508(f)]
c. No monitoring,recordkeeping,or reporting is required for sulfur dioxide emissions from the firing of natural gas in
these kilns(ID Nos. ESCPKI,ESCPK2,and ESCPK3)
3. 15A NCAC 2D.0521: CONTROL OF VISIBLE EMISSIONS
a. Visible emissions from these kilns (ID Nos. ESCPKI, ESCPK2, and ESCPK3) shall not be more than 20 percent
opacity when averaged over a six-minute period. However, six-minute averaging periods may exceed 20 percent
not more than once in any hour and not more than four times in any 24-hour period. In no event shall the six-
minute average exceed 87 percent opacity. [15A NCAC 2D .0521(d)]
Testing [15A NCAC 2Q .0508(f)]
b. If emissions testing is required, the testing shall be performed in accordance with 15A NCAC 2Q .0508(f) and
General Condition JJ found in Section 3 of this permit. If the results of this test are above the limit given in Section
2.1 E.3.a,above,the Permittee shall be deemed in noncompliance with 15A NCAC 2D .0521.
Monitoring [15A NCAC 2Q .0508(f)]
c. To assure compliance, once a month the Permittee shall observe the emission points of these sources for any
visible emissions above normal. The monthly observation must be made for each month of the calendar year period
to ensure compliance with this requirement. If visible emissions from a source are observed to be above normal,
the Permittee shall either:
i. Take appropriate action to correct the above-normal emissions as soon as practicable and within the
monitoring period and record the action taken as provided in the recordkeeping requirements below, or
ii. Demonstrate that the percent opacity from the emission points of the emission source in accordance with 15A
NCAC 2D .2601 (Method 9)for 12 minutes is below the limit given in Section 2.1 E.3.a,above.
If the above-normal emissions are not corrected per(i) above or if the demonstration in(ii)above cannot be made,
the Permittee shall be deemed to be in noncompliance with 15A NCAC 2D .0521.
Recordkeeping [15A NCAC 2Q .0508(f)]
d. The results of the monitoring shall be maintained in a logbook (written or electronic format) on-site and made
available to an authorized representative upon request. The logbook shall record the following:
i. The date and time of each recorded action;
ii. The results of each observation and/or test noting those sources with emissions that were observed to be in
noncompliance along with any corrective actions taken to reduce visible emissions;and
iii. The results of any corrective actions performed.
The Permittee shall be deemed in noncompliance with 15A NCAC 2D .0521 if these records are not maintained.

Permit No. 09006T05
Page 23
Reuortina[15A NCAC 2Q.0508(f)]
e. The Permittee shall submit a summary report of the observations postmarked .)r delivered by January 30 of each
calendar year for the preceding six-month period between July and December and July 30 of each calendar year for
the preceding six-month period between January and June. All instances of deviuti ins from the requirements of this
permit must be clearly identified.
F. Three roof granule mixing units (ID Nos. ESCPMI, ESCPM2, and ESCPM3) with three
associated baghouses (2,889 square feet of filter area, each; ID Nos. CDB11, CDB12, and
CDB19,respectively)
The following table provides a summary of limits and standards for the emission source(s)described above:
Regulated Pollutant Limits/Standards Applicable Regulation
E=4.10 x(P)1.61 for P<30 tons per hour
E=55.0 x(P)0-" —40 for P>30 tons per hour
Where: E= Allowable emission rate in pounds 15A NCAC 2D.0515
Particulate emissions per hour; and
P— Process weight in tons per hour
Compliance Assurance Monitoring 15A NCAC 213.0614
See Section 2.2-13
Visible emissions 20 percent opacity 15A NCAC 2D .0521
Volatile Organic Compounds See Section 2.2-A.1 15A NCAC 2D.0958
Toxic air pollutant emissions shall not exceed rates
Toxic air pollutants which cause established ambient levels to be 15A NCAC 2D .I 100
exceeded; State-enforceable only
(See Section 2.2-A.4.—Multiple Emission Sources)
Odorous emissions See Section 2.2-A.2 15A NCAC 2D.1806
Hazardous Air Pollutants See Section 2.2-A.3 15A NCAC 2Q .0317 to avoid
15A NCAC 2D .I I I I
Toxic Air Pollutants See Section 2.2-A.5 15A NCAC 2Q .0711
1. 15A NCAC 2D.0515: PARTICULATES FROM MISCELLANEOUS INDUSTRIAL PROCESSES
a. Emissions of particulate matter from these roof granule mixing units (ID Nos. ESCPMI,ESCPM2, and ESCPM3)
shall not exceed an allowable emission rate as calculated by the following equation: [15A NCAC 2D .0515(a)]
E=4.10 x(P)0'67 for P<30 tons per hour
E=55.0 x(P)0-"—40 for P>30 tons per hour
Where: E=Allowable emission rate in pounds per hour;and
P=Process weight in tons per hour
Liquid and gaseous fuels and combustion air are not considered as part of the process weight.
Testing[15A NCAC 2Q .0508(f)]
b. If emissions testing is required, the testing shall be performed in accordance with 15A NCAC 2Q .0508(f) and
General Condition JJ found in Section 3 of this permit. If the results of this test are above the limit given in Section
2.1 F.l.a,above,the Permittee shall be deemed in noncompliance with 15A NCAC 2D.0515.
Monitorinp/Recordkeeuina[15A NCAC 2Q.0508(f)]
c. Particulate matter emissions from these three roof granule mixing units (ID Nos. ESCPMI, ESCPM2, and
ESCPM3) shall be controlled by three bagfilters (ID Nos. CDB 11, CDB 12, and CDB 19, respectively). To assure
compliance, the Permittee shall perform inspections and maintenance as recommended by the manufacturer. In
addition to the manufacturer's inspection and maintenance recommendations, or if there is no manufacturer's

Permit No. 09006T05
Page 24
inspection and maintenance recommendations, as a minimum, the inspection and maintenance requirement shall
include the following:
i. An annual (for each 12 month period following the initial inspection) visual inspection of the system
ductwork and material collection unit for leaks;and
ii. An annual (for each 12 month period following the initial inspection) internal inspection of the bagfilter's
structural integrity.
The Permittee shall be deemed in noncompliance with 15A NCAC 2D .0515 if the ductwork and bagfilters are not
inspected and maintained.
d. The results of inspection and maintenance shall be maintained in a logbook (written or electronic format) on-site
and made available to an authorized representative upon request. The logbook shall record the following:
i. The date and time of each recorded action;
ii. The results of each inspection;
iii. The results of any maintenance performed on the bagfilters; and
iv. Any variance from manufacturer's recommendations, if any,and corrections made.
The Permittee shall be deemed in noncompliance with 15A NCAC 2D .0515 if these records are not maintained.
Reporting [15A NCAC 2Q .0508(f)]
e. The Permittee shall submit the results of any maintenance performed on the bagfilters within 30 days of a written
request by the DAQ.
f The Permittee shall submit a summary report of monitoring and recordkeeping activities postmarked or delivered
on or before January 30 of each calendar year for the preceding six-month period between July and December and
July 30 of each calendar year for the preceding six-month period between January and June. All instances of
deviations from the requirements of this permit must be clearly identified.
2. 15A NCAC 2D .0521: CONTROL OF VISIBLE EMISSIONS
a. Visible emissions from these three roof granule mixing units (ID Nos. ESCPMI, ESCPM2, and ESCPM3) shall
not be more than 20 percent opacity when averaged over a six-minute period. However, six-minute averaging
periods may exceed 20 percent not more than once in any hour and not more than four times in any 24-hour period.
In no event shall the six-minute average exceed 87 percent opacity. [15A NCAC 2D .0521(d)]
Testing [15A NCAC 2Q .0508(f)]
b. If emissions testing is required, the testing shall be performed in accordance with 15A NCAC 2Q .0508(f) and
General Condition JJ found in Section 3 of this permit. If the results of this test are above the limit given in Section
2.1 F.2.a,above, the Permittee shall be deemed in noncompliance with 15A NCAC 2D.0521.
Monitoring [15A NCAC 2Q .0508(f)]
c. To assure compliance, once a month the Permittee shall observe the emission points of these sources for any
visible emissions above normal.The monthly observation must be made for each month of the calendar year period
to ensure compliance with this requirement. If visible emissions from a source are observed to be above normal,
the Permittee shall either:
i. Take appropriate action to correct the above-normal emissions as soon as practicable and within the
monitoring period and record the action taken as provided in the recordkeeping requirements below,or
ii. Demonstrate that the percent opacity from the emission points of the emission source in accordance with 15A
NCAC 2D .2610(Method 9)for 12 minutes is below the limit given in Section 2.1 F.2.a,above.
If the above-normal emissions are not corrected per(i) above or if the demonstration in(ii)above cannot be made,
the Permittee shall be deemed to be in noncompliance with 15A NCAC 2D .0521.

Permit No. 09006T05
Page 25
Recordkeening [15A NCAC 2Q.0508(f)]
d. The results of the monitoring shall be maintained in a logbook (written or electronic format) on-site and made
available to an authorized representative upon request.The logbook shall record the following:
i. The date and time of each recorded action;
ii. The results of each observation and/or test noting those sources with emissions that were observed to be in
noncompliance along with any corrective actions taken to reduce visible emissions;and
iii. The results of any corrective actions performed.
The Permittee shall be deemed in noncompliance with 15A NCAC 2D .0521 if these records are not maintained.
Reporting[15A NCAC 2Q.0508(f)]
e. The Permittee shall submit a summary report of the observations postmarked or delivered on or before January 30
of each calendar year for the preceding six-month period between July and December and July 30 of each calendar
year for the preceding six-month period between January and June. All instances of deviations from the
requirements of this permit must be clearly identified.
G. Three coolers (ID Nos. ESCPCI, ESCPC2, and ESCPC3)
The following table provides a summary of limits and standards for the emission source(s)described above:
Regulated Pollutant Limits/Standards Applicable Regulation
E=4.10 x(P)11'61 for P<30 tons per hour
E=55.0 x(P)0-"—40 for P>30 tons per hour
Particulate emissions Where: E= Allowable emission rate in pounds per 15A NCAC 2D .0515
hour;and
P= Process weight in tons per hour
Visible emissions 20 percent opacity 15A NCAC 2D .0521
Volatile Organic Compounds See Section 2.2-A.1 15A NCAC 2D .0958
Toxic air pollutant emissions shall not exceed rates
Toxic air pollutants which cause established ambient levels to be 15A NCAC 2D.I 100
exceeded;State-enforceable only
(See Section 2.2-A.4.—Multiple Emission Sources)
Odorous emissions See Section 2.2-A.2 15A NCAC 2D .1806
Hazardous Air Pollutants See Section 2.2-A.3 15A NCAC 2Q .0317 to avoid
15A NCAC 2D .1111
Toxic Air Pollutants See Section 2.2-A.5 15A NCAC 2Q .0711
1. 15A NCAC 2D.0515: PARTICULATES FROM MISCELLANEOUS INDUSTRIAL PROCESSES
a. Emissions of particulate matter from these cooling units (ID Nos. ESCPCI, ESCPC2, and ESCPC3) shall not
exceed an allowable emission rate as calculated by the following equation: [15A NCAC 2D.0515(a)]
E=4.10 x(P)0.67 for P<30 tons per hour
E=55.0 x(P)0-1�—40 for P>30 tons per hour
Where: E=Allowable emission rate in pounds per hour; and
P=Process weight in tons per hour
Liquid and gaseous fuels and combustion air are not considered as part of the process weight.
Testing[15A NCAC 2Q.0508(f)]
b. If emissions testing is required, the testing shall be performed in accordance with 15A NCAC 2Q .0508(f) and
General Condition JJ found in Section 3 of this permit. If the results of this test are above the limit given in Section
2.1 G.La,above,the Permittee shall be deemed in noncompliance with 15A NCAC 2D.0515.

Permit No. 09006T05
Page 26
Monitoring/Recordkeeping/Reporting [15A NCAC 2Q .0508(f)]
c. The Permittee shall maintain records sufficient to demonstrate compliance with 15A NCAC 2D .0515 and shall
make these records available to a DAQ authorized representative upon request. The Permittee shall be deemed in
noncompliance with 15A NCAC 2D .0515 if the records are not maintained.
2. 15A NCAC 2D.0521: CONTROL OF VISIBLE EMISSIONS
a. Visible emissions from the three coolers (ID Nos. ESCPCI, ESCPC2, and ESCPC3) shall not be more than 20
percent opacity when averaged over a six-minute period. However, six-minute averaging periods may exceed 20
percent not more than once in any hour and not more than four times in any 24-hour period. In no event shall the
six-minute average exceed 87 percent opacity. [15A NCAC 2D .0521(d)]
Testing[15A NCAC 2Q .0508(f)]
b. If emissions testing is required, the testing shall be performed in accordance with 15A NCAC 2Q .0508(f) and
General Condition JJ found in Section 3 of this permit.If the results of this test are above the limit given in Section
2.1 G.2.a,above,the Permittee shall be deemed in noncompliance with 15A NCAC 2D.0521.
Monitoring[15A NCAC 2Q .0508(f)]
c. To assure compliance, once a month the Permittee shall observe the emission points of these sources for any
visible emissions above normal. The monthly observation must be made for each month of the calendar year period
to ensure compliance with this requirement. If visible emissions from a source are observed to be above normal,
the Permittee shall either:
i. Take appropriate action to correct the above-normal emissions as soon as practicable and within the
monitoring period and record the action taken as provided in the recordkeeping requirements below,or
ii. Demonstrate that the percent opacity from the emission points of the emission source in accordance with 15A
NCAC 2D .2610 (Method 9)for 12 minutes is below the limit given in Section 2.1 G.2.a,above.
If the above-normal emissions are not corrected per(i)above or if the demonstration in(ii)above cannot be made,
the Permittee shall be deemed to be in noncompliance with 15A NCAC 2D .0521.
Recordkeeping [15A NCAC 2Q .0508(f)]
d. The results of the monitoring shall be maintained in a logbook (written or electronic format) on-site and made
available to an authorized representative upon request.The logbook shall record the following:
i. The date and time of each recorded action;
ii. The results of each observation and/or test noting those sources with emissions that were observed to be in
noncompliance along with any corrective actions taken to reduce visible emissions;and
iii. The results of any corrective actions performed.
The Permittee shall be deemed in noncompliance with 15A NCAC 2D .0521 if these records are not maintained.
Reporting[15A NCAC 2Q.0508(f)]
e. The Permittee shall submit a summary report of the observations postmarked or delivered on or before January 30
of each calendar year for the preceding six-month period between July and December and July 30 of each calendar
year for the preceding six-month period between January and June. All instances of deviations from the
requirements of this permit must be clearly identified.

Permit No. 09006T05
Page 27
2.2 - Multiple Emission Source(s) Specific Limitations and Conditions
A. Facility-Wide Sources of Volatile Organic Compounds (VOC), Odorous Emissions, Hazardous
Air Pollutants(HAP),and/or Toxic Air Pollutants(TAP),including:
Four natural gas-fired dryers (ID Nos. ES1415, ESCPPHI, ESCPPH2, and ESCPPH3), as
described in Sections 2.1 B and 2.1 D, above;
Coloring Plant,as described in Section 2.1 C,above;
Three natural gas-fired kilns (ID Nos. ESCPK1, ESCPK2, and ESCPK3), as described in
Section 2.1 E,above;
Three roof granule mixing units (I ) Nos. ESCPMI, ESCPM2, and ESCPM3), as described in
Section 2.1 F,above; and
Three coolers (ID Nos. ESCPCI, ESCPC2 and ESCPC3), as described in Section 2.1 G, above
1. 15A NCAC 2D.0958: WORK PRACTICES FOR SOURCES OF VOLATILE ORGANIC COMPOUNDS
a. Pursuant to 15A NCAC 2D .0958, for all sources that use volatile organic compounds(VOC)as solvents,carriers,
material processing media, or industrial chemical reactants, or in similar uses that mix, blend, or manufacture
volatile organic compounds, or emit volatile organic compounds as a product of chemical reactions, and whose
emissions of VOC are greater than 15 pounds per day;the Permittee shall:
i. Store all material, including waste material, containing volatile organic compounds in tanks or in containers
covered with a tightly fitting lid that is free of cracks,holes,or other defects,when not in use,
ii. Clean up spills of volatile organic compounds as soon as possible following proper safety procedures,
iii. Store wipe rags containing volatile organic compounds in closed containers,
iv. Not clean sponges, fabric, wood, paper products, and other absorbent materials with volatile organic
compounds,
v. Transfer solvents containing volatile organic compounds used to clean supply lines and other coating
equipment into closable containers and close such containers immediately after each use, or transfer such
solvents to closed tanks, or to a treatment facility regulated under section 402 of the Clean Water Act,
vi. Clean mixing, blending, and manufacturing vats and containers containing volatile organic compounds by
adding cleaning solvent and close the vat or container before agitating the cleaning solvent. The spent cleaning
solvent shall then be transferred into a closed container, a closed tank or a treatment facility regulated under
section 402 of the Clean Water Act. [15A NCAC 2D .0958(c)]
b. When cleaning parts with a solvent containing a volatile organic compound,the Permittee shall:
i Flush parts in the freeboard area,
ii. Take precautions to reduce the pooling of solvent on and in the parts,
iii. Tilt or rotate parts to drain solvent and allow a minimum of 15 seconds for drying or until all dripping has
stopped,whichever is longer,
iv. Not fill cleaning machines above the fill line,
v. Not agitate solvent to the point of causing splashing. [15A NCAC 2D.0958(d)]
Monitoring[15A NCAC 2Q.0508(f)]
c. To assure compliance with paragraphs (a) and (b) above, the Permittee shall, at a minimum, perform a visual
inspection once per month of all operations and processes utilizing volatile organic compounds. The inspections
shall be conducted during normal operations. If the required inspections are not conducted the Permittee shall be
deemed to be in noncompliance with 15A NCAC 2D.0958.

Permit No.09006T05
Page 28
Recordkeeping[15A NCAC 2Q .0508(f)]
d. The results of the inspections shall be maintained in a logbook (written or electronic format) on-site and made
available to an authorized representative upon request.The logbook shall record the following:
i. The date and time of each inspection;and
ii. The results of each inspection noting whether or not noncompliant conditions were observed.
If the required records are not maintained the Permittee shall be deemed to be in noncompliance with rule 15A
NCAC 2D .0958.
Reporting [15A NCAC 2Q .0508(f)]
e. The Permittee shall submit a summary report of the observations postmarked or delivered on or before January 30
of each calendar year for the preceding six-month period between July and December and July 30 of each calendar
year for the preceding six-month period between January and June. All instances of deviations from the
requirements of this permit must be clearly identified.
STATE-ENFORCEABLE ONLY
2. 15A NCAC 2D.1806: CONTROL AND PROHIBITION OF ODOROUS EMISSIONS
a. The Permittee shall not operate the facility without implementing management practices or installing and operating
odor control equipment sufficient to prevent odorous emissions from the facility from causing or contributing to
objectionable odors beyond the facility's boundary.
3. 15A NCAC 2Q.0317: AVOIDANCE CONDITIONS to avoid
15A NCAC 2D.1111: MAXIMUM ACHIEVABLE CONTROL TECHNOLOGY
a. In order to avoid applicability of 15A NCAC 2D .1111 "Maximum Achievable Control Technology"and 40 CFR
Part 63 "National Emission Standards for Hazardous Air Pollutants for Source Categories," the Permittee shall
limit emissions of pollutants that qualify as hazardous air pollutants(HAP)pursuant to 40 CFR §63.2"Definitions"
such that:
i. The consecutive 12-month total emissions from this facility are less than 10 tons for each individual HAP;and
ii. The consecutive 12-month total emissions from this facility are less than 25 tons for all HAP combined.
Testing[15A NCAC 2Q.0508(f)]
b. If emissions testing is required, the testing shall be performed in accordance with 15A NCAC 2Q .0508(f) and
General Condition JJ found in Section 3 of this permit.If the results of this test are above either of the limits given
in Section 2.2 A.3.a,above,the Permittee shall be deemed in noncompliance with 15A NCAC 2D .1111.
Monitoring[15A NCAC 2Q.0508(f)]
c. To assure compliance, the Permittee shall monitor the total HAP emissions from facility-wide sources of HAP
emissions on a monthly basis utilizing,as appropriate:
i. A mass balance method (e.g. multiplying the amount of HAP-containing material utilized by the HAP content
of that material);
ii. Emission factors approved by NC DAQ (e.g. the current emission factors found in the EPA AP-42 document
for natural gas combustion);and/or
iii. Any other appropriate method of emission estimation approved by NC DAQ.
The Permittee shall be deemed in noncompliance with 15A NCAC 2D.1111 if this monitoring is not performed.
Recordkeeping[15A NCAC 2Q .0508(f)]
d. The Permittee shall retain records (written or electronic format) of the monitoring conducted pursuant to Sections
2.2 A.3.c, above. The Permittee shall maintain these records on-site for a period of at least five years after the date
of the record,or until facility becomes major for purposes of 15A NCAC 2D .1111 and 40 CFR Part 63, and make
these records available for review by authorized DAQ personnel upon request.
The Permittee shall be deemed in noncompliance with 15A NCAC 2D .1111 if these records are not maintained.

Permit No. 09006T05
Page 29
Reporting [15A NCAC 2Q.0508(f)]
e. The Permittee shall submit a semiannual monitoring summary report postmarked or delivered on or before January 30
of each calendar year for the preceding six-month period between July and December and July 30 of each calendar
year for the preceding six-month period between January and June. These semiannual reports shall clearly identify of
all instances of deviations from the requirements of this permit.
STATE ONLY TOXIC AIR POLLUTANT REQUIREMENT
4. TOXIC AIR POLLUTANT EMISSIONS LIMITATION AND REPORTING REQUIREMENT - Pursuant to
15A NCAC 2D .1100 and in accordance with the approved application(application No. 1900104.11A),for an air toxic
compliance demonstration(approved on October 1,2012),the following permit limits shall not be exceeded:
EMISSION TOXIC AIR POLLUTANT(S) EMISSION
SOURCE(S) LIMIT(S)
Arsenic&Compounds(total mass of elemental AS,arsine and all 0.691b/yr
Facility-wide inorganic compounds)(ASC-7778394)
Cadmium Metal,elemental,unreacted(Component of CDC)(7440-43-9) 3.79 lb/yr
STATE-ENFORCEABLE ONLY
5. 15A NCAC 2Q.0711:EMISSION RATES REQUIRING A PERMIT
a. The facility shall be operated and maintained in such a manner that any new,existing or increased actual emissions
of any Toxic Air Pollutant (TAP) listed in 15A NCAC 2Q .0711 or in this permit from all sources at the facility
(excluding those sources exempt under 15A NCAC 2Q .0702 "Exemptions"), including fugitive emissions and
emission sources not otherwise required to have a permit, will not exceed its respective TAP permitting emission
rates(TPER)listed in 15A NCAC 2Q.0711 without first obtaining an air permit to construct or operate.
b. PRIOR to exceeding any of the TPERs listed in 15A NCAC 2Q .0711, the Permittee shall be responsible for
obtaining an air permit to emit TAPs and for demonstrating compliance with the requirements found in 15A NCAC
2D .1100 "Control of Toxic Air Pollutants."
c. The Permittee shall maintain at the facility records of operational information sufficient for demonstrating to the
Division of Air Quality staff that actual TAPS are less than the rate listed in 15A NCAC 2Q.0711.
d. The TPER table listed below is provided to assist the Permittee in determining when an air permit is required
pursuant to 15A NCAC 2Q .0711 and may not represent all TAPs being emitted from the facility. This table will be
updated at such time as the permit is either modified or renewed.
TPER
Pollutant(CAS No.)
pounds per year pounds per day pounds per hour
Benzene(71-43-2) 8.1
Beryllium(7440-41-7) 0.28
Dichlorobenzene(106-46-7) 16.8
Formaldehyde(50-00-0) 0.04
N-bexane(110-54-3) 23.0
Manganese compounds
0.63
(Not applicable)
Mercury(7439-97-6) 0.013
Nickel metal(7440-02-0) 0.13
Toluene(108-88-3) 98 14.4

Permit No. 09006T05
Page 30
B. Three natural gas-fired kilns (ID Nos. ESCPKI, ESCPK2, and ESCPK3), as described in
Section 2.1 E, above; and
Three roof granule mixing units (ID Nos. ESCPMI, ESCPM2, and ESCPM3), as described in
Section 2.1 F, above
1. 15A NCAC 2D.0614:COMPLIANCE ASSURANCE MONITORING
140 CFR Part 64:Compliance Assurance Monitoring]
a. For sources ESCPKI,ESCPK2,ESCPK3,ESCPMI,ESCPM2,and ESCPM3 and the associated bagfilters(ID
Nos. CDB11, CDB12, CD1313, CD1314, CD1319, and CDB20), the Permittee shall comply with 40 CFR Part 64
pursuant to 15A NCAC 2D .0614 to assure that the listed sources comply with the emission limits of 15A NCAC
2D.0515 and 15A NCAC 2D.0521.
b. To assure compliance particulate matter and visible emissions from sources ESCPK1, ESCPK2, ESCPK3,
ESCPMI, ESCPM2, and ESCPM3 shall be controlled by the associated bagfilters (ID Nos. CDB11, CDB12,
CDB13,CDB14,CDB19,and CDB20)as listed in Sections 2.1 E and F,above.
Monitoring/Recordkeeping [15A NCAC 2Q.0508(f)]
c. To assure compliance for sources ESCPK1, ESCPK2, ESCPK3, ESCPMI, ESCPM2, and ESCPM3, the
Permittee shall:
i. (A) Conduct daily monitoring of the differential pressure drops across the associated bagfilters (ID Nos.
CDBll,CDB12,CDB13,CDB14,CDB19,and CDB20)via differential pressure gauges.The Permittee
shall install, maintain, operate, and calibrate the differential pressure drop gauges as recommended by the
equipment manufacturer. If a differential pressure drop across a bagfilter less than 2.0 inches of water
column (unless the occurrence is less than 120 operational hours from installation of a new filter) or
greater than 6.0 inches of water column is observed then an excursion has occurred;
(B) Conduct monthly monitoring of visible emissions from the associated bagfilters (ID Nos. CDB11,
CDB12, CDB13,CDB14,CDB19, and CDB20)using EPA Reference Method 22. This monitoring shall
be performed by personnel familiar with EPA Reference Method 22. If visible emissions are observed
from a bagfilter,then an excursion has occurred;and
(C) Perform the monitoring and recordkeeping requirements of Sections 2.1 E.l.c and d and Sections 2.1
F.Lc and d,above.
ii. In the event of an excursion the Permittee shall take appropriate action to correct the excursion as soon as
practicable. If a source or bagfilter listed in Section 2.2 B.l.a, above, operates under conditions qualifying as
an excursion for more than 5%of that device's operational time during a consecutive 6-month period,then the
Permittee shall develop a Quality Improvement Plan in accordance with 40 CFR§64.8.
Hi. The results of monitoring, inspections, maintenance, calibrations and corrections conducted pursuant to
Sections 2.2 B.l.c.i and ii, above, shall be maintained in a logbook (written or electronic format) on-site and
made available to an authorized representative upon request.The logbook shall record the following:
(A) The date and time of each recorded action;
(B) The results of the differential pressure drop and visible emissions monitoring,noting any excursions along
with any corrective actions taken to correct a differential pressure drop or reduce visible emissions;
(C) The results of any inspections or maintenance performed on the bagfilters and/or differential pressure
drop gauges; and
(D) Any variance from manufacturer's recommendations,if any,and corrections made.
(E) The Permittee shall be deemed in noncompliance with 15A NCAC 2D .0614 if this monitoring and
recordkeeping is not conducted.
Reporting [15A NCAC 2Q.0508(f)]
d. The Permittee shall submit a summary report of the monitoring postmarked or delivered on or before January 30 of
each calendar year for the preceding six-month period between July and December and July 30 of each calendar
year for the preceding six-month period between January and June. All instances of deviations from the
requirements of this permit must be clearly identified.

Permit No. 09006T05
Page 31
SECTION 3 - GENERAL CONDITIONS (Version 3.6 01/31/12)
This section describes terms and conditions applicable to this Title V facility.
A. General Provisions[NCGS 143-215 and 15A NCAC 2Q.0508(i)(16)]
1. Terms not otherwise defined in this permit shall have the meaning assigned to such terms as defined in 15A NCAC 2D
and 2Q.
2. The terms,conditions,requirements,limitations,and restrictions set forth in this permit are binding and enforceable
pursuant to NCGS 143-215.114A and 143-215.114B,including assessment of civil and/or criminal penalties.Any
unauthorized deviation from the conditions of this permit may constitute grounds for revocation and/or enforcement
action by the DAQ.
3. This permit is not a waiver of or approval of any other Department permits that may be required for other aspects of
the facility which are not addressed in this permit.
4. This permit does not relieve the Permittee from liability for harm or injury to human health or welfare,animal or plant
life,or property caused by the construction or operation of this permitted facility,or from penalties therefore,nor does
it allow the Permittee to cause pollution in contravention of state laws or rules,unless specifically authorized by an
order from the North Carolina Environmental Management Commission.
5. Except as identified as state-only requirements in this permit,all terms and conditions contained herein shall be
enforceable by the DAQ,the EPA,and citizens of the United States as defined in the Federal Clean Air Act.
6. Any stationary source of air pollution shall not be operated,maintained,or modified without the appropriate and valid
permits issued by the DAQ,unless the source is exempted by rule. The DAQ may issue a permit only after it receives
reasonable assurance that the installation will not cause air pollution in violation of any of the applicable requirements.
A permitted installation may only be operated,maintained,constructed,expanded,or modified in a manner that is
consistent with the terms of this permit.
B. Permit Availability[I 5A NCAC 2Q.0507(k)and.0508(i)(9)(B)]
The Permittee shall have available at the facility a copy of this permit and shall retain for the duration of the permit term
one complete copy of the application and any information submitted in support of the application package. The permit and
application shall be made available to an authorized representative of Department of Environment and Natural Resources
upon request.
C. Severability Clause[15A NCAC 2Q.0508(i)(2)]
In the event of an administrative challenge to a final and binding permit in which a condition is held to be invalid,the
provisions in this permit are severable so that all requirements contained in the permit,except those held to be invalid,shall
remain valid and must be complied with.
D. Submissions[15A NCAC 2Q .0507(e)and 2Q .0508(i)(16)]
Except as otherwise specified herein,two copies of all documents,reports,test data,monitoring data,notifications,request
for renewal,and any other information required by this permit shall be submitted to the appropriate Regional Office. Refer
to the Regional Office address on the cover page of this permit. For continuous emissions monitoring systems(CEMS)
reports,continuous opacity monitoring systems(COMS)reports,quality assurance(QA)/quality control(QC)reports,acid
rain CEM certification reports,and NOx budget CEM certification reports,one copy shall be sent to the appropriate
Regional Office and one copy shall be sent to:
Supervisor,Stationary Source Compliance
North Carolina Division of Air Quality
1641 Mail Service Center
Raleigh,NC 27699-1641
All submittals shall include the facility name and Facility ID number(refer to the cover page of this permit).
E. Duty to Comply[15A NCAC 2Q.0508(i)(3)]
The Permittee shall comply with all terms,conditions,requirements,limitations and restrictions set forth in this permit.
Noncompliance with any permit condition except conditions identified as state-only requirements constitutes a violation of
the Federal Clean Air Act. Noncompliance with any permit condition is grounds for enforcement action,for permit
termination,revocation and reissuance,or modification,or for denial of a permit renewal application.

Permit No.09006T05
Page 32
F. Circumvention-STATE ENFORCEABLE ONLY
The facility shall be properly operated and maintained at all times in a manner that will effect an overall reduction in air
pollution. Unless otherwise specified by this permit,no emission source may be operated without the concurrent operation
of its associated air pollution control device(s)and appurtenances.
G. Permit Modifications
1. Administrative Permit Amendments[15A NCAC 2Q .0514]
The Permittee shall submit an application for an administrative permit amendment in accordance with 15A NCAC 2Q
.0514.
2. Transfer in Ownership or Operation and Application Submittal Content [15A NCAC 2Q.0524 and 2Q.0505]
The Permittee shall submit an application for an ownership change in accordance with 15A NCAC 2Q.0524 and 2Q
.0505.
3. Minor Permit Modifications[15A NCAC 2Q.0515]
The Permittee shall submit an application for a minor permit modification in accordance with 15A NCAC 2Q.0515.
4. Significant Permit Modifications[15A NCAC 2Q.0516]
The Permittee shall submit an application for a significant permit modification in accordance with 15A NCAC 2Q
.0516.
5. Reopening for Cause [15A NCAC 2Q.0517]
The Permittee shall submit an application for reopening for cause in accordance with 15A NCAC 2Q.0517.
H. Changes Not Requiring Permit Modifications
1. Reporting Requirements
Any of the following that would result in new or increased emissions from the emission source(s) listed in Section 1
must be reported to the Regional Supervisor,DAQ:
a. changes in the information submitted in the application;
b. changes that modify equipment or processes;or
c. changes in the quantity or quality of materials processed.
If appropriate,modifications to the permit may then be made by the DAQ to reflect any necessary changes in the permit
conditions. In no case are any new or increased emissions allowed that will cause a violation of the emission limitations
specified herein.
2. Section 502(b)(10)Changes[15A NCAC 2Q.0523(a)]
a. "Section 502(b)(10)changes"means changes that contravene an express permit term or condition. Such changes
do not include changes that would violate applicable requirements or contravene federally enforceable permit
terms and conditions that are monitoring(including test methods),recordkeeping,reporting,or compliance
certification requirements.
b. The Permittee may make Section 502(b)(10)changes without having the permit revised if:
i. the changes are not a modification under Title I of the Federal Clean Air Act;
ii. the changes do not cause the allowable emissions under the permit to be exceeded;
iii. the Permittee notifies the Director and EPA with written notification at least seven days before the change is
made;and
iv. the Permittee shall attach the notice to the relevant permit.
c. The written notification shall include:
i. a description of the change;
ii. the date on which the change will occur;
iii. any change in emissions;and
iv. any permit term or condition that is no longer applicable as a result of the change.
d. Section 502(b)(10)changes shall be made in the permit the next time that the permit is revised or renewed,
whichever comes first.
3. Off Permit Changes[15A NCAC 2Q.0523(b)]
The Permittee may make changes in the operation or emissions without revising the permit if:
a. the change affects only insignificant activities and the activities remain insignificant after the change;or
b. the change is not covered under any applicable requirement.

Permit No. 09006T05
Page 33
4. Emissions Trading[15A NCAC 2Q.0523(c)]
To the extent that emissions trading is allowed under 15A NCAC 2D,including subsequently adopted maximum
achievable control technology standards,emissions trading shall be allowed without permit revision pursuant to 15A
NCAC 2Q.0523(c).
I.A. Reporting Requirements for Excess Emissions and Permit Deviations
[15A NCAC 2D.0535(f)and 2Q.0508(f)(2)]
"Excess Emissions"-means an emission rate that exceeds any applicable emission limitation or standard allowed by any
rule in Sections.0500, .0900, .1200,or.1400 of Subchapter 21);or by a permit condition;or that exceeds an emission limit
established in a permit issued under 15A NCAC 2Q.0700. (Note:Definitions of excess emissions under 2D.1110 and 2D
.1111 shall apply where defined by rule.)
"Deviations"-for the purposes of this condition,any action or condition not in accordance with the terms and conditions of
this permit including those attributable to upset conditions as well as excess emissions as defined above lasting less than
four hours.
Excess Emissions
1. If a source is required to report excess emissions under NSPS (15A NCAC 2D.0524),NESHAPS(15A NCAC 2D
.1110 or.1111),or the operating permit provides for periodic(e.g.,quarterly)reporting of excess emissions,reporting
shall be performed as prescribed therein.
2. If the source is not subject to NSPS(15A NCAC 2D.0524),NESHAPS(15A NCAC 2D.I 110 or.1111),or these
rules do NOT define"excess emissions,"the Permittee shall report excess emissions in accordance with 15A NCAC
213.0535 as follows:
a. Pursuant to 15A NCAC 2D.0535,if excess emissions last for more than four hours resulting from a malfunction,
a breakdown of process or control equipment,or any other abnormal condition,the owner or operator shall:
i. notify the Regional Supervisor or Director of any such occurrence by 9:00 a.m.Eastern Time of the
Division's next business day of becoming aware of the occurrence and provide:
• name and location of the facility;
• nature and cause of the malfunction or breakdown;
• time when the malfunction or breakdown is first observed;
• expected duration;and
• estimated rate of emissions;
ii. notify the Regional Supervisor or Director immediately when corrective measures have been accomplished;
and
iii. submit to the Regional Supervisor or Director within 15 days a written report as described in 15A NCAC 2D
.0535(f)(3).
Permit Deviations
3. Pursuant to 15A NCAC 2Q.0508(0(2),the Permittee shall report deviations from permit requirements(terms and
conditions)as follows:
a. Notify the Regional Supervisor or Director of all other deviations from permit requirements not covered under
15A NCAC 2D.0535 quarterly. A written report to the Regional Supervisor shall include the probable cause of
such deviation and any corrective actions or preventative actions taken. The responsible official shall certify all
deviations from permit requirements.
I.B. Other Requirements under 15A NCAC 2D.0535
The Pernvttee shall comply with all other applicable requirements contained in 15A NCAC 2D.0535,including 15A
NCAC 2D.0535(c)as follows:
1. Any excess emissions that do not occur during start-up and shut-down shall be considered a violation of the
appropriate rule unless the owner or operator of the sources demonstrates to the Director,that the excess emissions are
a result of a malfunction. The Director shall consider,along with any other pertinent information,the criteria
contained in 15A NCAC 2D.0535(c)(1)through(7).
2. 15A NCAC 2D.0535(g). Excess emissions during start-up and shut-down shall be considered a violation of the
appropriate rule if the owner or operator cannot demonstrate that excess emissions are unavoidable.

Permit No.09006T05
Page 34
J. Emergency Provisions[40 CFR 70.6(g)]
The Permittee shall be subject to the following provisions with respect to emergencies:
1. An emergency means any situation arising from sudden and reasonably unforeseeable events beyond the control of the
facility,including acts of God,which situation requires immediate corrective action to restore normal operation,and
that causes the facility to exceed a technology-based emission limitation under the permit,due to unavoidable
increases in emissions attributable to the emergency. An emergency shall not include noncompliance to the extent
caused by improperly designed equipment,lack of preventive maintenance,careless or improper operation,or operator
error.
2. An emergency constitutes an affirmative defense to an action brought for noncompliance with such technology-based
emission limitations if the conditions specified in 3.below are met.
3. The affirmative defense of emergency shall be demonstrated through properly signed contemporaneous operating logs
or other relevant evidence that include information as follows:
a. an emergency occurred and the Permittee can identify the cause(s)of the emergency;
b. the permitted facility was at the time being properly operated;
c. during the period of the emergency the Permittee took all reasonable steps to minimize levels of emissions that
exceeded the standards or other requirements in the permit;and
d. the Permittee submitted notice of the emergency to the DAQ within two working days of the time when emission
limitations were exceeded due to the emergency. This notice must contain a description of the emergency,steps
taken to mitigate emissions,and corrective actions taken.
4. In any enforcement proceeding,the Permittee seeking to establish the occurrence of an emergency has the burden of
proof.
5. This provision is in addition to any emergency or upset provision contained in any applicable requirement specified
elsewhere herein.
K. Permit Renewal[15A NCAC 2Q.0508(e)and 2Q.0513(b)]
This 15A NCAC 2Q.0500 permit is issued for a fixed term not to exceed five years and shall expire at the end of its term.
Permit expiration terminates the facility's right to operate unless a complete 15A NCAC 2Q .0500 renewal application is
submitted at least nine months before the date of permit expiration. If the Permittee or applicant has complied with 15A
NCAC 2Q .0512(b)(1), this 15A NCAC 2Q .0500 permit shall not expire until the renewal permit has been issued or
denied. Permit expiration under 15A NCAC 2Q .0400 terminates the facility's right to operate unless a complete 15A
NCAC 2Q .0400 renewal application is submitted at least six months before the date of permit expiration for facilities
subject to 15A NCAC 2Q .0400 requirements. In either of these events, all terms and conditions of these permits shall
remain in effect until the renewal permits have been issued or denied.
L. Need to Halt or Reduce Activity Not a Defense[15A NCAC 2Q.0508(i)(4)]
It shall not be a defense for a Permittee in an enforcement action that it would have been necessary to halt or reduce the
permitted activity in order to maintain compliance with the conditions of this permit.
M. Duty to Provide Information(submittal of information)[15A NCAC 2Q.0508(i)(9)]
1. The Permittee shall furnish to the DAQ,in a timely manner,any reasonable information that the Director may request
in writing to determine whether cause exists for modifying,revoking and reissuing,or terminating the permit or to
determine compliance with the permit.
2. The Permittee shall furnish the DAQ copies of records required to be kept by the permit when such copies are
requested by the Director.For information claimed to be confidential,the Permittee may furnish such records directly
to the EPA upon request along with a claim of confidentiality.
N. Daty to Supplement[15A NCAC 2Q.0507(f)]
The Permittee,upon becoming aware that any relevant facts were omitted or incorrect information was submitted in the
permit application,shall promptly submit such supplementary facts or corrected information to the DAQ. The Permittee
shall also provide additional information as necessary to address any requirement that becomes applicable to the facility
after the date a complete permit application was submitted but prior to the release of the draft permit.
O. Retention of Records[I 5A NCAC 2Q.0508(f)and 2Q.0508(1)]
The Permittee shall retain records of all required monitoring data and supporting information for a period of at least five
years from the date of the monitoring sample,measurement,report,or application. Supporting information includes all

Permit No.09006T05
Page 35
calibration and maintenance records and all original strip-chart recordings for continuous monitoring information,and
copies of all reports required by the permit. These records shall be maintained in a form suitable and readily available for
expeditious inspection and review. Any records required by the conditions of this permit shall be kept on site and made
available to DAQ personnel for inspection upon request.
P. Compliance Certification[15A NCAC 2Q.0508(n)]
The Permittee shall submit to the DAQ and the EPA(Air and EPCRA Enforcement Branch,EPA,Region 4,61
Forsyth Street,Atlanta,GA 30303)postmarked on or before March 1 a compliance certification(for the preceding
calendar year)by a responsible official with all federally-enforceable terms and conditions in the permit,including
emissions limitations,standards,or work practices. It shall be the responsibility of the current owner to submit a
compliance certification for the entire year regardless of who owned the facility during the year. The compliance
certification shall comply with additional requirements as may be specified under Sections 114(a)(3)or 504(b)of the
Federal Clean Air Act. The compliance certification shall specify:
1. the identification of each term or condition of the permit that is the basis of the certification;
2. the compliance status(with the terms and conditions of the permit for the period covered by the certification);
3. whether compliance was continuous or intermittent;and
4. the method(s)used for determining the compliance status of the source during the certification period.
Q. Certification by Responsible Official[15A NCAC 2Q.0520]
A responsible official shall certify the truth,accuracy,and completeness of any application form,report,or compliance
certification required by this permit. All certifications shall state that based on information and belief formed after
reasonable inquiry,the statements and information in the document are true,accurate,and complete.
R. Permit Shield for Applicable Requirements[15A NCAC 2Q.0512]
1. Compliance with the terms and conditions of this permit shall be deemed compliance with applicable requirements,
where such applicable requirements are included and specifically identified in the permit as of the date of permit
issuance.
2. A permit shield shall not alter or affect:
a. the power of the Commission,Secretary of the Department,or Governor under NCGS 143-215.3(a)(12),or EPA
under Section 303 of the Federal Clean Air Act;
b. the liability of an owner or operator of a facility for any violation of applicable requirements prior to the effective
date of the permit or at the time of permit issuance;
c. the applicable requirements under Title IV;or
d. the ability of the Director or the EPA under Section 114 of the Federal Clean Air Act to obtain information to
determine compliance of the facility with its permit.
3. A permit shield does not apply to any change made at a facility that does not require a permit or permit revision made
under 15A NCAC 2Q.0523.
4. A permit shield does not extend to minor permit modifications made under 15A NCAC 2Q.0515.
S. Termination,Modification,and Revocation of the Permit[I 5A NCAC 2Q.0519]
The Director may terminate,modify,or revoke and reissue this permit if:
1. the information contained in the application or presented in support thereof is determined to be incorrect;
2. the conditions under which the permit or permit renewal was granted have changed;
3. violations of conditions contained in the permit have occurred;
4. the EPA requests that the permit be revoked under 40 CFR 70.7(g)or 70.8(d);or
5. the Director finds that termination,modification,or revocation and reissuance of the permit is necessary to carry out
the purpose of NCGS Chapter 143,Article 21B.
T. Insisnificant Activities[15A NCAC 2Q.0503]
Because an emission source or activity is insignificant does not mean that the emission source or activity is exempted from
any applicable requirement or that the owner or operator of the source is exempted from demonstrating compliance with
any applicable requirement. The Permittee shall have available at the facility at all times and made available to an
authorized representative upon request,documentation,including calculations,if necessary,to demonstrate that an
emission source or activity is insignificant.

Permit No. 09006T05
Page 36
U. Property Rights[15A NCAC 2Q.0508(i)(8)]
This permit does not convey any property rights in either real or personal property or any exclusive privileges.
V. Inspection and Entry[15A NCAC 2Q.0508(1)and NCGS 143-215.3(a)(2)]
1. Upon presentation of credentials and other documents as may be required by law,the Permittee shall allow the DAQ,
or an authorized representative,to perform the following:
a. enter the Permittee's premises where the permitted facility is located or emissions-related activity is conducted,or
where records are kept under the conditions of the permit;
b. have access to and copy,at reasonable times,any records that are required to be kept under the conditions of the
permit;
C. inspect at reasonable times and using reasonable safety practices any source,equipment(including monitoring and
air pollution control equipment),practices,or operations regulated or required under the permit;and
d. sample or monitor substances or parameters,using reasonable safety practices,for the purpose of assuring
compliance with the permit or applicable requirements at reasonable times.
Nothing in this condition shall limit the ability of the EPA to inspect or enter the premises of the Permittee under
Section 114 or other provisions of the Federal Clean Air Act.
2. No person shall refuse entry or access to any authorized representative of the DAQ who requests entry for purposes of
inspection,and who presents appropriate credentials,nor shall any person obstruct,hamper,or interfere with any such
authorized representative while in the process of carrying out his official duties. Refusal of entry or access may
constitute grounds for permit revocation and assessment of civil penalties.
W. Annual Fee Payment[15A NCAC 2Q.0508(1)(10)]
1. The Permittee shall pay all fees in accordance with 15A NCAC 2Q.0200.
2. Payment of fees may be by check or money order made payable to the N.C.Department of Environment and Natural
Resources. Annual permit fee payments shall refer to the permit number.
3. If,within 30 days after being billed,the Permittee fails to pay an annual fee,the Director may initiate action to
terminate the permit under 15A NCAC 2Q.0519.
X. Annual Emission Inventory Requirements[I 5A NCAC 2Q.0207]
The Permittee shall report by June 30 of each year the actual emissions of each air pollutant listed in 15A NCAC 2Q
.0207(a)from each emission source within the facility during the previous calendar year. The report shall be in or on such
form as may be established by the Director. The accuracy of the report shall be certified by a responsible official of the
facility.
Y. Confidential Information [15A NCAC 2Q.0107 and 2Q.0508(i)(9)]
Whenever the Permittee submits information under a claim of confidentiality pursuant to 15A NCAC 2Q.0107,the
Permittee may also submit a copy of all such information and claim directly to the EPA upon request. All requests for
confidentiality must be in accordance with 15A NCAC 2Q.0107.
Z. Construction and Operation Permits[15A NCAC 2Q.0100 and.0300]
A construction and operating permit shall be obtained by the Permittee for any proposed new or modified facility or
emission source which is not exempted from having a permit prior to the beginning of construction or modification,in
accordance with all applicable provisions of 15A NCAC 2Q.0100 and.0300.
AA. Standard Application Form and Required Information [15A NCAC 2Q.0505 and.0507]
The Permittee shall submit applications and required information in accordance with the provisions of 15A NCAC 2Q
.0505 and.0507.
1313. Financial Responsibility and Compliance History 115A NCAC 2Q.0507(d)(4)]
The DAQ may require an applicant to submit a statement of financial qualifications and/or a statement of substantial
compliance history.

Permit No. 09006T05
Page 37
CC. Refrigerant Requirements(Stratospheric Ozone and Climate Protection)[15A NCAC 2Q.0501(e)]
1. If the Permittee has appliances or refrigeration equipment,including air conditioning equipment,which use Class I or
II ozone-depleting substances such as chlorofluorocarbons and hydrochlorofluorocarbons listed as refrigerants in 40
CFR Part 82 Subpart A Appendices A and B,the Permittee shall service,repair,and maintain such equipment
according to the work practices,personnel certification requirements,and certified recycling and recovery equipment
specified in 40 CFR Part 82 Subpart F.
2. The Permittee shall not knowingly vent or otherwise release any Class I or II substance into the environment during
the repair,servicing,maintenance,or disposal of any such device except as provided in 40 CFR Part 82 Subpart F.
3. The Permittee shall comply with all reporting and recordkeeping requirements of 40 CFR 82.166. Reports shall be
submitted to the EPA or its designee as required.
DD. Prevention of Accidental Releases-Section 112(r)[15A NCAC 2Q.0508(h)]
If the Permittee is required to develop and register a Risk Management Plan with EPA pursuant to Section I I2(r)of the
Clean Air Act,then the Permittee is required to register this plan in accordance with 40 CFR Part 68.
EE. Prevention of Accidental Releases General Duty Clause-Section 112(r)(1)-
FEDERALLY-ENFORCEABLE ONLY
Although a risk management plan may not be required,if the Permittee produces,processes,handles,or stores any amount
of a listed hazardous substance,the Permittee has a general duty to take such steps as are necessary to prevent the
accidental release of such substance and to minimize the consequences of any release.
FF. Title IV Allowances[15A NCAC 2Q.0508(i)(1)]
This permit does not limit the number of Title IV allowances held by the Permittee,but the Permittee may not use
allowances as a defense to noncompliance with any other applicable requirement. The Pennittee's emissions may not
exceed any allowances that the facility lawfully holds under Title IV of the Federal Clean Air Act.
GG. Air Pollution Emergency Episode[15A NCAC 2D.0300]
Should the Director of the DAQ declare an Air Pollution Emergency Episode,the Permittee will be required to operate in
accordance with the Permittee's previously approved Emission Reduction Plan or,in the absence of an approved plan,with
the appropriate requirements specified in 15A NCAC 2D.0300.
HH. Registration of Air Pollution Sources[I 5A NCAC 2D.0202]
The Director of the DAQ may require the Penr ittee to register a source of air pollution. If the Permittee is required to
register a source of air pollution,this registration and required information will be in accordance with 15A NCAC 2D
.0202(b).
11. Ambient Air Quality Standards[15A NCAC 2D.0501(c)]
In addition to any control or manner of operation necessary to meet emission standards specified in this permit,any source
of air pollution shall be operated with such control or in such manner that the source shall not cause the ambient air quality
standards in 15A NCAC 2D.0400 to be exceeded at any point beyond the premises on which the source is located. When
controls more stringent than named in the applicable emission standards in this permit are required to prevent violation of
the ambient air quality standards or are required to create an offset,the permit shall contain a condition requiring these
controls.
JJ. General Emissions Testing and Reporting Requirements[15A NCAC 2Q.0508(i)(16)]
Emission compliance testing shall be by the procedures of Section.2600,except as may be otherwise required in Rules
.0524,.0912, .1110, .1111,or.1415 of Subchapter 2D.If emissions testing is required by this permit or the DAQ or if the
Permittee submits emissions testing to the DAQ to demonstrate compliance,the Permittee shall perform such testing in
accordance with 15A NCAC 2D.2600 and follow the procedures outlined below:
1. The owner or operator of the source shall arrange for air emission testing protocols to be provided to the Director
prior to air pollution testing.Testing protocols are not required to be pre-approved by the Director prior to air
pollution testing.The Director shall review air emission testing protocols for pre-approval prior to testing if
requested by the owner or operator at least 45 days before conducting the test.
2. Any person proposing to conduct an emissions test to demonstrate compliance with an applicable standard shall
notify the Director at least 15 days before beginning the test so that the Director may at his option observe the test.
3. The owner or operator of the source shall arrange for controlling and measuring the production rates during the

Permit No. 09006T05
Page 38
period of air testing.The owner or operator of the source shall ensure that the equipment or process being tested is
operated at the production rate that best fulfills the purpose of the test.The individual conducting the emission test
shall describe the procedures used to obtain accurate process data and include in the test report the average
production rates determined during each testing period.
4. Two copies of the final air emission test report shall be submitted to the Director not later than 30 days after
sample collection unless otherwise specified in the specific conditions. The owner or operator may request an
extension to submit the final test report.The Director shall approve an extension request if he finds that the
extension request is a result of actions beyond the control of the owner or operator.
a. The Director shall make the final determination regarding any testing procedure deviation and the validity of
the compliance test.The Director may:
(1) Allow deviations from a method specified under a rule in this Section if the owner or operator of the
source being tested demonstrates to the satisfaction of the Director that the specified method is
inappropriate for the source being tested.
(2)Prescribe alternate test procedures on an individual basis when he finds that the alternative method is
necessary to secure more reliable test data.
(3)Prescribe or approve methods on an individual basis for sources or pollutants for which no test method is
specified in this Section if the methods can be demonstrated to determine compliance of permitted
emission sources or pollutants.
b. The Director may authorize the Division of Air Quality to conduct independent tests of any source subject to a
rule in this Subchapter to determine the compliance status of that source or to verify any test data submitted
relating to that source.Any test conducted by the Division of Air Quality using the appropriate testing
procedures described in Section 2D.2600 has precedence over all other tests.
KK. Reopening for Cause[15A NCAC 2Q.0517]
1. A permit shall be reopened and revised under the following circumstances:
a. additional applicable requirements become applicable to a facility with remaining permit term of three or more
years;
b. additional requirements(including excess emission requirements)become applicable to a source covered by Title
IV;
c. the Director or EPA finds that the permit contains a material mistake or that inaccurate statements were made in
establishing the emissions standards or other terms or conditions of the permit;or
d. the Director or EPA determines that the permit must be revised or revoked to assure compliance with the
applicable requirements.
2. Any permit reopening shall be completed or a revised peanut issued within 18 months after the applicable requirement
is promulgated. No reopening is required if the effective date of the requirement is after the expiration of the permit
term unless the term of the permit was extended pursuant to 15A NCAC 2Q.0513(c).
3. Except for the state-enforceable only portion of the permit,the procedures set out in 15A NCAC 2Q.0507,.0521,or
.0522 shall be followed to reissue the permit. If the State-enforceable only portion of the permit is reopened,the
procedures in 15A NCAC 2Q.0300 shall be followed. The proceedings shall affect only those parts of the permit for
which cause to reopen exists.
4. The Director shall notify the Permittee at least 60 days in advance of the date that the permit is to be reopened,except
in cases of imminent threat to public health or safety the notification period may be less than 60 days.
5. Within 90 days,or 180 days if the EPA extends the response period,after receiving notification from the EPA that a
permit needs to be ternimated,modified,or revoked and reissued,the Director shall send to the EPA a proposed
determination of termination,modification,or revocation and reissuance,as appropriate.
LL. Reporting Requirements for Non-Operating Equipment[15A NCAC 2Q.0508(i)(16)]
The Pemuttee shall maintain a record of operation for permitted equipment noting whenever the equipment is taken from
and placed into operation. During operation the monitoring recordkeeping and reporting requirements as prescribed by the
permit shall be implemented within the monitoring period.
MM. Fugitive Dust Control Requirement[15A NCAC 2D.0540]-STATE ENFORCEABLE ONLY
As required by 15A NCAC 2D.0540"Particulates from Fugitive Dust Emission Sources,"the Permittee shall not cause or
allow fugitive dust emissions to cause or contribute to substantive complaints or excess visible emissions beyond the
property boundary. If substantive complaints or excessive fugitive dust emissions from the facility are observed beyond the
property boundaries for six minutes in any one hour(using Reference Method 22 in 40 CFR,Appendix A),the owner or

Permit No.09006T05
Page 39
operator may be required to submit a fugitive dust plan as described in 2D.0540(f).
"Fugitive dust emissions"means particulate matter from process operations that does not pass through a process stack or
vent and that is generated within plant property boundaries from activities such as:unloading and loading areas,process
areas stockpiles,stock pile working,plant parking lots,and plant roads(including access roads and haul roads).
NN. Specific Permit Modifications[15A NCAC 2Q.0501 and.0523]
1. For modifications made pursuant to 15A NCAC 2Q.0501(c)(2),the Permittee shall file a Title V Air Quality Permit
Application for the air emission source(s)and associated air pollution control device(s)on or before 12 months
after commencing operation.
2. For modifications made pursuant to 15A NCAC 2Q.0501(d)(2),the Permittee shall not begin operation of the air
emission source(s)and associated air pollution control device(s)until a Title V Air Quality Permit Application is
filed and a construction and operation permit following the procedures of Section.0500(except for Rule.0504 of
this Section)is obtained.
3. For modifications made pursuant to 502(b)(10),in accordance with 15A NCAC 2Q.0523(a)(1)(C),the Permittee
shall notify the Director and EPA(EPA-Air Planning Branch,61 Forsyth St.,Atlanta,GA 30303)in writing at
least seven days before the change is made. The written notification shall include:
a. a description of the change at the facility;
b. the date on which the change will occur;
c. any change in emissions;and
d. any permit term or condition that is no longer applicable as a result of the change.
In addition to this notification requirement,with the next significant modification or Air Quality Permit renewal,
the Permittee shall submit a page"E5" of the application forms signed by the responsible official verifying that the
application for the 502(b)(10)change/modification,is true,accurate,and complete. Further note that
modifications made pursuant to 502(b)(10)do not relieve the Permittee from satisfying preconstruction
requirements.
00. Third Party Participation and EPA Review[15A NCAC 2Q.0521, .0522 and.0525(7)]
For permits modifications subject to 45-day review by the federal Environmental Protection Agency(EPA), EPA's
decision to not object to the proposed permit is considered final and binding on the EPA and absent a third party
petition,the failure to object is the end of EPA's decision-making process with respect to the revisions to the permit.
The time period available to submit a public petition pursuant to 15A NCAC 2Q .0518 begins at the end of the 45-day
EPA review period.

Permit No. 09006T05
Page 40
ATTACHMENT
List of Acronyms
AOS Alternate Operating Scenario
BACT Best Available Control Technology
Btu British thermal unit
CAA Clean Air Act
CAIR Clean Air Interstate Rule
CEM Continuous Emission Monitor
CFR Code of Federal Regulations
DAQ Division of Air Quality
DENR Department of Environment and Natural Resources
EMC Environmental Management Commission
EPA Environmental Protection Agency
FR Federal Register
GACT Generally Available Control Technology
HAP Hazardous Air Pollutant
MACT Maximum Achievable Control Technology
NAA Non-Attainment Area
NCAC North Carolina Administrative Code
NCGS North Carolina General Statutes
NESHAPS National Emission Standards for Hazardous Air Pollutants
NOx Nitrogen Oxides
NSPS New Source Performance Standard
OAH Office of Administrative Hearings
PM Particulate Matter
PM10 Particulate Matter with Nominal Aerodynamic Diameter of 10 Micrometers or Less
POS Primary Operating Scenario
PSD Prevention of Significant Deterioration
RACT Reasonably Available Control Technology
SIC Standard Industrial Classification
SIP State Implementation Plan
SOz Sulfur Dioxide
tpy Tons Per Year
VOC Volatile Organic Compound