TCN05906_RollTech_20200727

ROLL-TECH MOLDING PRODUCTS LLC
243 PERFORMANCE DRIVE SE
HICKORY NC 28602
TAX CERTIFICATION
In accordance with the provisions of the General Statutes of North Carolina [G.S. 130A -
294(a)(3); G.S. 105-122(b); G.S. 105-130.10; G.S. 105-130.5(b)(6); and G.S. 105-275(8)], this
is to certify that:
filed a request for tax certification on resource recovery or recycling facilities and/or
equipment on 3/30/2020.
The Division of Waste Management of the North Carolina Department of Environmental
Quality inspected or verified these resource recovery or recycling facilities and/or equipment
on 7/17/2020, and found that the facilities and/or equipment in Enclosure (1) meet the
requirements of the Standards for Special Tax Treatment of Recycling and Resource
Recovery Equipment and Facilities.
DATE TAX CERTIFICATION APPROVED:7/27/2020
Jason M. Watkins
Field Operations Branch Head
Div. of Waste Management, Solid Waste Section
Enclosure: Property Listing
cc:Brad Fowler, Catawba County Tax Assessor
C.T. Gerstell, Environmental Senior Specialist
State of North Carolina | Environmental Quality | Waste Management
1646 Mail Service Center | 217 West Jones Street | Raleigh, NC 27699-1646
919 707 8200
CATAWBA COUNTY
Deb Aja, Environmental Supervisor
Digitally signed by
Jason M. Watkins
Date: 2020.07.27
14:56:25 -04'00'
ROLL-TECH MOLDING PRODUCTS LLC
7/27/2020
Year AcquiredSerial/Asset Number Original CostProperty Type / Description
CATAWBA COUNTY
19EQU100 $7,990.00
19EQU92 $6,800.00
19EQU95 $650.00
19EQU97 $1,445.00
19EQU98 $5,799.00
19EQU99 $2,407.00
19TOL47 $26,916.00
19TOL48 $1,657.00
19TOL49 $3,925.00
19TOL50 $2,968.00
19TOL52 $2,856.00
19TOL53 $25,490.00
HYDRAULIC CYLINDER BLUE PRESS
ACE/NELMOR MARATHON GRINDER
ABH-40 ASL UNITE OIL FILTRATION
NORD MOTOR/GEARBOX GRINDER
BLUE PRESS HYDRAULIC CYLINDER
LINEAR TRANSDUCERS TIRE PRESS
7-CAVITY TIRE 254 MOLD
REWIND MOTOR FOR PLASTIC GRINDER
47<EXT CY BLUE PRESSSES
TOOLING INJECTION MOLDS
BLUE PRESS LINE
7-CAVITY TIRE 261 MOLD
Total $88,903.00
Page2of2