SWA000022__11 Fountain Information_20201001

Rossi, Brian
From: Russ Graham <[e-mail]>
Sent: Thursday, January 23, 2020 12:10 PM
To: Rossi, Brian
Subject: Emerald Lake - Fountain Info
Attachments: Scott Aerator Pond Fountain & Light Kit Documents.pdf, Kasco Fountain 3400VFX200
Brochure.pdf
Brian,
Here's the fountain info as requested:
The main pond, BMP 2, is a larger unit: Scott brand, Model4DA-20 Display Aerator, 1Hp, (230amp), w/ 4 light
kit/remote, controller (see attached Scott info)
The other two ponds, BMP 1 and BMP 2 are a different brand and slightly smaller: Kasco, Model 43400VFX, 3/4HP
(120V), w/ light kit & controller
All founatins have been installed and operational for more than a year. The HOA now maintains both the ponds and the
fountains.
Russ Graham
Land Development Coordinator
Epcon Communities
11020 David Taylor Drive, Suite 105
Charlotte, NC 28262
704.201.9885

VX- SERIES AERATING FOUNTAINS
VX-SERIES AERATING FOUNTAINS ARE:
THE LEAST EXPENSIVE to purchase, maintain, repair, and operate.
COMPLETE with everything you need: control panel with Ground Fault Interrupter and
photo -eye for optional light kit, power cord, and mooring lines.
INDUSTRIAL STRENGTH — designed with heavy-duty stainless steel components for
continuous operation, extended motor life and corrosion prevention (even in salt water.)
ENERGY EFFICIENT — low power consumption makes continuous operation affordable.
DEPENDABLE — units are designed to operate continuously with minimal maintenance.
They are the least likely fountains to clog of any manufacturer because of Kasco's
deflector technology, prop guard, and standard bottom intake screen.
VERSATILE — choose from a variety of power options to address the
aeration needs of virtually any -size body of water. VX-Series Fountains
are available in 1/2, 3/4, 1, 2, and 5 hp sizes. (Also available: 1/4 hp to
7.5 hp Decorative Fountains with multiple spray patterns.) Power cords
are available in 50', 100, 150'and 200' lengths. 250, 300, 400' and 500'
power cord available on 240V single phase and 230V 3 phase units.
EASY TO USE AND INSTALL — fountains are easy to install, move, and
operate. Out of the box and in your pond in one hour or less!
COMPLIANT AND WARRANTED — Approved to UL and CSA
standards by ETL as complete packages. 1/2, 3/4 and 1 hp fountains
have a 2 year manufacturer's warranty; 2 and 5 hp carry a 3 year
manufacturer's warranty.

WHY AERATE YOUR POND?
• Increased circulation and oxygenation of thermal -stratified water helps
to stimulate the natural biodegradation of organic waste (such as grass
clippings, leaves and run-off) and pollutants.
• Oxygen is circulated and absorbed into the water, thereby increasing
aerobic decomposition of sunken organic matter.
• Aeration can help eliminate spring and fall turnover.
• Aeration helps to promote greater densities of fish.
OPTIONAL LIGHT KIT ADDS BEAUTY
Decorative light kits add beauty and interest to your aerated pond. The superior design
of Kasco lighting sets a new quality standard that competitors attempt to achieve!
LR light kits: These bronze light packages are available in two or three light kits. Each
fixture is solid brass, has a clear lens, is internally potted using multiple gaskets, has
thermal overload protection, and comes with clear 75w MR-16 Halogen bulbs. The 1/2
and 3/4 hp units can use a two -light kit or three -light kit depending on your budget and
preferred light level, The 1 hp and larger require a 3-light kit for proper illumination. You
can also add two lighting packages to any 2 or 5 hp unit to create a brighter and more
dramatic display. Kasco also offers 50 watt colored bulbs in red, green, blue and yellow.
LED Light Kits: Available in sets of 3 or 6 permanently sealed light fixturess. Each fixture
includes a waterproof connector allowing for individual replacement in the field. Each
fixture uses only 9 watts of power and has a 50,000 hour bulb life. Will fit any Kasco VX
fountain from 1/2 to 5 HP.
POWER CONTROL CONSERVES ENERGY
VX-Series 120V fountains come standard with a C-25 Ground Fault Circuit
Interrupter (GFCI) in a rain -tight enclosure with 24-hour timer and photo sensor for
optional light kit.
VX-Series 240V fountains come standard with a C-85
(C-95 on 5 hp units) Ground Fault Circuit Interrupter (GFCI) in a rain -tight enclosure,
that offers an external plug-in or internal hardwired connection, a 24-hour timer,
lightning arrestor, and photo sensor for optional light kit.
- J-Series 208V to 230V 3 phase fountains come with 5ma personal trip level GFI,
i adjustable motor starter with over current, overload, and phase unbalance
protection, hands -off -auto switch, and individual timers for motor and lights in a
non-metallic rain -tight enclosure.
800 Deere Rd
Prescott, WI 54021
Phone [phone]
Fax [phone]
[e-mail]
www.KascoMarine.com
www.GotAlgae.com
f 4
It_- sum
LED Lights
0
The best mix of aeration and display with
over 800 gallons per minute (on 5 hp.)
_SER
ES OPERATING INFORMATION
MODEL NO.
PATTERN SIZE
HP
VOLTAGE
OPER. AMPS
REC. POND SIZES (SA)
MIN. DEPTH OF OPER.
2400VFX
5'H X 15'W
1/2
120
7.0
Up to 1/3 acre
15"
3400VFX
551HX21'W
3/4
120
8.0
Up to1/2acre
17.5"
3400HVFX
551HX21'W
3/4
240
4
Up to1/2acre
17.5"
4400VFX
8'HX26'W
1
120
11.3
Up to3/4acre
191,
4400HVFX
8'HX26'W
1
240
5.7
Up to3/4acre
191,
8400VFX
8'H X32'W
2
240
11
Up to 1 1/4acre
24"
2.3VFX
8'H X32'W
2
2303(j)
7.5
Up to 1 1/4acre
24"
5.1 VFX
10' H X 34' W
5
240
20
Up to 2 acres
26"
5.3VFX
10' H X 34' W
5
230 34)
16
Up to 2 acres
26"

scat raerator
water in motion
Pond
Fountains
We at Scott Aerator thank you for your puree: of rgoal to ensure that you are completely
satisfied with your new Fountain and that it continues to operate smoothly for many years
to come. Please take a few moments to read through this document for proper assembly,
installation and maintenance to maximize the operating life of the unit.
This Kit Include
1 -
FLOAT PLATFOF
1 -
PUMP ASSEMBI
1 -
STAINLESS STEI
2 -
5/16"x2" STAINL
2 -
STAINLESS STEI
3 -
SELF TAPPING E
Tools Needed
ONE 3/8" WRENCF
TWO 1/2" WRENCHES (OR PLIERS)

Assembly Instructions
Begin by placing the fountain housing on a solid surface, with the pump discharge opening facing up.
2. Tie nylon rope (not included) to the two stainless steel eyebolts. These will be the anchoring lines for the fountain.
3. Next, put the float in place and secure with the two 5/16" x 2" bolts, washers and nuts included.
4. Now, turn. the fountain upside down, remove the styrofoam doughnut, and place the stainless steel filter in place.
Be sure to line up the pre -drilled holes on the fountain with the position marks on the filter. Attach the filter with the
three self -tapping screws provided.
5. At this point, the fountain is ready to be placed in the water for final preparation and anchoring. Care should be used
when handling the fountain, it is very important that the weight of the fountain not be placed upon the stainless
steel filter.
6. Once your fountain is in the water, attach the fountain head by screwing it into place.
7. Float the fountain to the desired position and secure the attached nylon ropes to shore, or use 2 concrete blocks
submerged at least 20 feet apart.
8. The final step is to supply electric power to your fountain, taking extra care to Aways use a ground fault circuit
interrupter and a licensed electrical contractor.
Shown with
Skyward
Nozzle
STAINLESS STEEL
BOLTS
u
SELF -TAPPING SCREWS
STAINLESS STEEL FILTER BASKET
17 Always use a GFCI
Always disconnect the power
b when swimmers are present
ItDo NOT use an extension cord
to supply power to the motor

Maintaining your Pond Fountain
Most of our products require very little to any maintenance. Under normal operating conditions, you should enjoy many
years of trouble free service from the unit.
Anchoring ropes, depending on type, will deteriorate over time. These should be replaced every five years if quality nylon
rope (3/8" or thicker) is utilized. When the unit is removed from the water to replace anchoring ropes, it would be a good
opportunity to wash the fountain down with high pressure water. After cleaning, a visual inspection of the entire fountain
is recommended to be certain nothing is restricting water flow. The Scott Aerator Company has engineered all of its
water features to eliminate the need for time consuming and costly winterizing products and procedures. Removing the
Fountain from the water each winter will dry out and potentially damage the pump seals. Simply leave your fountain in the
water, turn the power supply off, and forget about it for the winter. Once the water thaws in the spring, re-establish power
to the unit and you're good to go. All of the components will withstand sub -zero conditions without damage.
Call 1-800-928-3745 to order replacement parts
FLOAT PLATFORM ....................................
PART # 20037
SS MOTOR MOUNTING BRACKET..........
PART # 20115
MOTOR HOUSING ....................................
PART # 20034
STAINLESS STEEL FILTER ........................
PART # 13500
1/2 HP 115V MOTOR ................................
PART # 20000
1/2 HP 230V MOTOR ................................
PART # 20002
1-1/2 HP 230V MOTOR .............................
PART # 20001
1/2 HP PUMP ............................................
PART # 13502
1-1/2 HP PUMP .........................................
PART # 13503
1/2 HP 115V 670 10 25 Ibs
1/2 HP 230V 670 5 25 Ibs
1-'/2 HP 230 V 1770 10.6 45 Ibs
"Longer power cords available
To find the cost to run one item:
1. Total up the watts per day for the item to get total watts/day.
2. Divide total watts/day by 1000 to get the total kilowatt hours
(kWh)/day.
3. Multiply the kWh/day times the cost/Kwh to get the average
cost/day.
4. To find out the average cost per month, multiply the
cost/day by 30. (Power company monthly billing cycles vary
from 28-33 days)
' #12
#10
#8
#6
#4
#2
70' 160'
250'
390,
620'
980'
1460'
70' 650'
1020'
1810'
2510'
3880'
5880'
100' 310'
480'
770'
1200'
1870'
2850'
Refer to the chart above to determine the proper cable size and length for your particular pump. The maximum lengths listed
are from the pump motor to the circuit breaker, not to the plug in. Improper wire size can cause unsafe operating conditions and
damage the pump. DO NOT use an extension cord to supply power to the motor as this will put strain on and shorten the life of
the pump motor.
Options and Accessories
Timers
Save energy while extending the life of your fountain!
Timers available for 115v and 230V motors. The
Timing Center by Intermatic contains two timers in
one steel outdoor enclosure.
Lighting
There is nothing more majestic than viewing your
fountain or aerator at night under lights. Light kits
are easy -to -install and available in heavy duty, shock
resistant, water cooled 120 watt par 38 Halogen
floodlights or LED. GFCI required, please disconnect
power when swimmers are _present. Light kits. can. be
added to your existing fountain on site as well.
115V Timer 230V Timer Timing Center
Part #20036 Part #20039 Part #20040
2 Light Kit
Halogen Part #13505
LED Part #13605
l
4 Light Kit Colored Lens
Halogen Part #13509 Part #13508
LED Part #13609 Specify Color

The Scott Aerator. Awesome Warranty
All standard Scott Aerator products are unconditionally
warranted for five years against motor defects in materials
or workmanship, under normal operating conditions. All
other product components are warranted for one year from
date of purchase. Scott Aerator will repair or replace failed
parts under warranty when the defective unit is returned
to the factory, shipping prepaid, and factory inspection
establishes that the part was defective. The unit must be
returned to the factory prior to shipment of replacement
parts. All parts replaced under this warranty will be returned
with shipping prepaid. Scott Aerator will not be liable for
consequential damage nor for any costs associated with
removal or attempts to repair components in the field.
scoff aerator
13245 Barry Street, Holland, MI 49424
scottaerator.com
[e-mail]
800-WATER-45 (800-928-3745)
[phone]

t
A C el
r
s
,
-12 Volt
-9 Watts Per Fixture
-1230 Lumens
This Kit Includes
(4) RGB LIGHTS WITH POWER CABLE
(4)1/2" BOLTS AND NUTS
(4) STAINLESS STEEL ARM BRACKETS
TIMER/CONTROL UNIT
REMOTE CONTROL
Tools Needed
7/16" AND 1/2" WRENCHES AND PLIERS

00 00
° o
o I
Note: Vary light Note: Be careful not
angles to add a fuller m to over -tighten the
lighting effect. wire connection.
It is designed to lock
3'........ ii=;: with 1/2 turn.
Assembly Instructions
1. Attach each arm assembly to the water feature. Be sure to orient the arms with "U' facing upward.
Remove one of the 2" bolts attaching the float to your Scott water feature and align the holes with the
stainless steel arm. Reinsert the bolt with washer, outward through the housing, float and stainless steel arm.
Secure with washer and rut. Repeat for the remaining arm assembies.
2. Continue by attaching each light to the slotted end of the stainless steel arms. Feed 1/2" x 1/4" bolt
downward through each light bracket and steel arm then secure with 1/4" nut. The lights can be
positioned along the arm by loosening the lock nut, sliding the light to the desired position, then
re -tightening the nut.
3. Connect the lights to the Timer Control Unit by aligning pins and screwing the connector together 1/2 turn
only. Do not force the connection tight or you may damage the O-ring or wiring.

Programming Instructions for One
On and Off Setting for All Seven Days
1. Unlock the programmer by pressing the "C/R" button four times. This will
remove the "a" symbol from the lower left corner of the screen and allow
input on the device. If no inputs are pressed in 15 seconds, the device
will lock itself again. To lock it manually, press the "C/R" button again.
4 I [ 2. Press the "C" button to reset the device.
3. Set the :time by pressing the clock icon and using the D+, H+, and M+ to
adjust the time.
* !: ■ 4. Press the "P" key to set a time for the display to turn on. Using the H+
and M+ buttons to adjust to the desired time.
5. Press the D+ button until the display shows all seven days across the top
- then press the "P" button.
6. Use the H+ and M+ buttons to set the time for the display to tum off.
7. When finished, press the clock icon to lock in your settings.
Programming Instru ions for Multiple On and Off Settings
1. Unlock the programmer by pressing the "C/R" button four times. This will
remove the "a" symbol from the lower left corner of the screen and allow
input on the device. If no inputs are pressed in 15 seconds, the device
will lock itself again. To lock it manually, press the "C/R" button again.
2. Press the "C" button to reset the device.
3. Set the time by pressing the clock icon and using the D+, H+, and M+ to
adjust the time.
4. Press the "P" key to set a time for the display to turn on. Using the H+
and M+ buttons to adjust to the desired time.
5. Press the D+ button until the display shows all the desired combination
of days for this setting across the top then press the "P" button.
6. Use the H+ and M+ buttons to set the time for the display to turn off.
7. Repeat steps 4 through 6 for each desired setting.
8. When finished, press the clock icon to lock in your settings.
Programming LED Settings
e
1. Turn on the LED controller with the power button on the top left.
2. a. If using a solid color setting, press the corresponding button
s_ s+ i
(R for red, G for green, B for Blue, or W for white) then skip
1
to step 4.
a- a•
b. To use a looped pattern, press the M- and M+ buttons to
M- M+
cycle through preset patterns until you find the desired
R G
sequence.
B w
3. Set the speed at which the sequence plays with the S- and S+ buttons.
4. Adjust the brightness of the LEDs using the B- and B+ buttons.
5. Turn off the display with the power button.

The Scott Aerator Awesome Warranty
All standard Scott Aerator products are unconditionally warranted for five years against
motor defects in materials or workmanship, under normal operating conditions. All other
product components are warranted for one.year from date of purchase. Scott Aerator will
repair or replace failed parts under warranty when the defective unit is returned to the
factory, shipping prepaid, and factory inspection establishes that the part was defective.
The unit must be returned to the factory prior to shipment of replacement parts. All parts
replaced under this warranty will be returned with shipping prepaid. Scott Aerator will not
be liable for consequential damage nor for any costs associated with removal or attempts
to repair components in the field.
z�
scott rerator
13245 Barry Street, Holland, MI 49424
scottaeratorcom
[e-mail]
800-WATER-45 (800-928-3745)
[phone]

PRODUCT INFORMATION
155737101 Rev. 5
ATTENTION!
IMPORTANT INFORMATION FOR INSTALLER OF THIS EQUIPMENT
THIS EQUIPMENT IS INTENDED FOR INSTALLATION BY TECHNICALLY QUALIFIED PERSONNEL. FAILURE TO INSTALL IT IN WITH
NATIONAL AND LOCAL ELECTRICAL CODES, AND WITH FRANKLIN ELECTRIC RECOMMENDATIONS, MAY RESULT IN ELECTRICAL SHOCK OR
FIRE HAZARD, UNSATISFACTORY PERFORMANCE, AND EQUIPMENT FAILURE. FRANKLIN INSTALLATION INFORMATION IS AVAILABLE FROM
PUMP MANUFACTURERS AND DISTRIBUTORS, AND DIRECTLY FROM FRANKLIN ELECTRIC. CALL FRANKLIN TOLL FREE 800-348-2420 FOR
INFORMATION. RETAIN THIS INFORMATION SHEET WITH THE EQUIPMENT FOR FUTURE REFERENCE.
WARNING
SERIOUS OR FATAL ELECTRICAL SHOCK MAY RESULT FROM FAILURE TO CONNECT THE MOTOR, CONTROL ENCLOSURES, METAL PLUMBING,
AND ALL OTHER METAL NEAR THE MOTOR OR CABLE, TO THE POWER SUPPLY GROUND TERMINAL USING WIRE NO SMALLER THAN MOTOR
CABLE WIRES. TO REDUCE RISK OF ELECTRICAL SHOCK, DISCONNECT POWER BEFORE WORKING ON OR AROUND THE WATER SYSTEM. DO
NOT USE MOTOR IN SWIMMING AREAS.
ATTENTION I
INFORMATIONS IMPORTANTES POUR UINSTALLATEUR DE CET tQUIPEMENT
CET CQUIPEMENT DOIT ETRE INSTALLS PAR UN TECHNICIEN QUALIFIE. SI UINSTALLATION NEST PAS CONFORME AUX LOIS NATIONALES OU
LOCALES AINSI QU'AUX RECOMMANDATIONS DE FRANKLIN ELECTRIC, UN CHOC ELECTRIQUE, UN INCENDIE, LINE PERFORMANCE NON
ACCEPTABLE, VOIR MEME LE NON-FONCTIONNEMENT PEUVENT SURVENIR. UN GUIDE WINSTALLATION DE FRANKLIN ELECTRIC EST
DISPONIBLE CHEZ LE MANUFACTURIER DE LA POMPE, LES DISTRIBUTEURS OU DIRECTEMENT CHEZ FRANKLIN ELECTRIC. POUR DE PLUS
AMPLES RENSEIGNEMENTS, APPELEZ SANS FRAIS LE 1-800-348-2420. CONSERVEZ CETTE FEUILLE D'INFORMATION AVEC L'EQUIPEMENT
POUR CONSULTATION FUTURE.
AVERTISSEMENT
UN CHOC f=LECTRIQUE SERIEUX OU MEME MORTEL EST POSSIBLE SI UON NI`GUGE DE CONNECTER LE MOTEUR, LA PLOMBERIE
Mf`TALLIQUE, LA BOITE DE CONTRSLE ET TOUT METAL PRES DU MOTEUR OU FIL ALLANT VERS UALIMENTATION D'ENERGIE AVEC BORNE
DE MISE A LA TERRE UTILISANT AU MOINS LE MEME CALIBRE DE FIL QUE CEUX ALLANT AU MOTEUR. POUR RtDUIRE LE RISQUE DE CHOC
ELECTRIQUE. COUPER LE COURANT AVANT DE TRAVAILLER PRES OU SUR LE SYSTEME D'EAU. NE PAS UTILISER CE MOTEUR DANS LINE ZONE
DE BAIGNADE.
ATENCION
INFORMACION PARA EL INSTALADOR DE ESTE EQUIPO
PARA LA INSTALACION DE ESTE EQUIPO, SE REQUIERE DE PERSONAL TECNICO CALIFICADO. EL NO CUMPLIR CON LAS NORMAS ELECTRICAS
NACIONALES Y LOCALES, ASI COMO CON LAS RECOMENDACIONES DE FRANKLIN ELECTRIC DURANTE SU INSTALACION, PUEDE OCASIONAR:
UN CHOQUE ELECTRICO, PELIGRO DE UN INCENDIO, OPERACION DEFECTUOSA E INCLUSO LA DESCOMPOSTURA DEL EQUIPO. LOS
MANUALES DE INSTALACION Y PUESTA EN MARCHA DE LOS EQUIPOS, ESTAN DISPONIBLES CON LDS DISTRIBUIDORES, FABRICANTES DE
BOMBAS 0 DIRECTAMENTE CON FRANKLIN ELECTRIC. PUEDE LLAMAR GRATUITAMENTE PARA MAYOR INFORMACION AL TELEFONO 800
348 2420. GUARDAR ESTA INFORMACION JUNTO AL EQUIPO PARA FUTURAS CONSULTAS.
ADVERTENCIA
PUEDE OCURRIR UN CHOQUE ELECTRCCO, SERIO 0 FATAL DEBIDO A UNA ERRONEA CONECCION DEL: MOTOR, DE LOS TABLEROS
ELECTRICOS, DE LA TUBERIA, DE CUALQUIER OTRA PARTE METALICA QUE ESTA CERCA DEL MOTOR 0 POR NO UTILIZAR UN CABLE PARA
TIERRA DE CALIBRE IGUAL 0 MAYOR AL DE LA ALIMENTACION. PARA REDUCIR EL RIESGO DE CHOQUE ELECTRCCO. DESCONECTAR LA
ALIMENTACION ELECTRICA ANTES DE INICIAR A TRABAJAR EN EL SISTEMA HIDRAULICO. NO UTILIZAR ESTE MOTOR EN ALBERCAS 0 AREAS
EN DONDE SE PRACTIQUE NATACION.
Page 1 of 1